include/configs/T104xRDB.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright 2014 Freescale Semiconductor, Inc.
   4  * Copyright 2020 NXP
   5  */
   6
   7 #ifndef __CONFIG_H
   8 #define __CONFIG_H
   9
  10 #include <linux/stringify.h>
  11
  12 /*
  13  * T104x RDB board configuration file
  14  */
  15 #include <asm/config_mpc85xx.h>
  16
  17 #ifdef CONFIG_RAMBOOT_PBL
  18
  19 #ifndef CONFIG_NXP_ESBC
  20 #define CONFIG_SYS_FSL_PBL_PBI $(SRCTREE)/board/freescale/t104xrdb/t104x_pbi.cfg
  21 #else
  22 #define CONFIG_SYS_FSL_PBL_PBI \
  23                 $(SRCTREE)/board/freescale/t104xrdb/t104x_pbi_sb.cfg
  24 #endif
  25
  26 #define CONFIG_SPL_FLUSH_IMAGE
  27 #define CONFIG_SPL_PAD_TO               0x40000
  28 #define CONFIG_SPL_MAX_SIZE             0x28000
  29 #ifdef CONFIG_SPL_BUILD
  30 #define CONFIG_SPL_SKIP_RELOCATE
  31 #define CONFIG_SPL_COMMON_INIT_DDR
  32 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
  33 #undef CONFIG_DM_I2C
  34 #endif
  35 #define RESET_VECTOR_OFFSET             0x27FFC
  36 #define BOOT_PAGE_OFFSET                0x27000
  37
  38 #ifdef CONFIG_MTD_RAW_NAND
  39 #ifdef CONFIG_NXP_ESBC
  40 #define CONFIG_U_BOOT_HDR_SIZE          (16 << 10)
  41 /*
  42  * HDR would be appended at end of image and copied to DDR along
  43  * with U-Boot image.
  44  */
  45 #define CONFIG_SYS_NAND_U_BOOT_SIZE     ((768 << 10) + \
  46                                          CONFIG_U_BOOT_HDR_SIZE)
  47 #else
  48 #define CONFIG_SYS_NAND_U_BOOT_SIZE     (768 << 10)
  49 #endif
  50 #define CONFIG_SYS_NAND_U_BOOT_DST      0x30000000
  51 #define CONFIG_SYS_NAND_U_BOOT_START    0x30000000
  52 #define CONFIG_SYS_NAND_U_BOOT_OFFS     (256 << 10)
  53 #ifdef CONFIG_TARGET_T1040RDB
  54 #define CONFIG_SYS_FSL_PBL_RCW \
  55 $(SRCTREE)/board/freescale/t104xrdb/t1040_nand_rcw.cfg
  56 #endif
  57 #ifdef CONFIG_TARGET_T1042RDB_PI
  58 #define CONFIG_SYS_FSL_PBL_RCW \
  59 $(SRCTREE)/board/freescale/t104xrdb/t1042_pi_nand_rcw.cfg
  60 #endif
  61 #ifdef CONFIG_TARGET_T1042RDB
  62 #define CONFIG_SYS_FSL_PBL_RCW \
  63 $(SRCTREE)/board/freescale/t104xrdb/t1042_nand_rcw.cfg
  64 #endif
  65 #ifdef CONFIG_TARGET_T1040D4RDB
  66 #define CONFIG_SYS_FSL_PBL_RCW \
  67 $(SRCTREE)/board/freescale/t104xrdb/t1040d4_nand_rcw.cfg
  68 #endif
  69 #ifdef CONFIG_TARGET_T1042D4RDB
  70 #define CONFIG_SYS_FSL_PBL_RCW \
  71 $(SRCTREE)/board/freescale/t104xrdb/t1042d4_nand_rcw.cfg
  72 #endif
  73 #endif
  74
  75 #ifdef CONFIG_SPIFLASH
  76 #define CONFIG_RESET_VECTOR_ADDRESS             0x30000FFC
  77 #define CONFIG_SPL_SPI_FLASH_MINIMAL
  78 #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE        (768 << 10)
  79 #define CONFIG_SYS_SPI_FLASH_U_BOOT_DST         (0x30000000)
  80 #define CONFIG_SYS_SPI_FLASH_U_BOOT_START       (0x30000000)
  81 #define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS        (256 << 10)
  82 #ifndef CONFIG_SPL_BUILD
  83 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
  84 #endif
  85 #ifdef CONFIG_TARGET_T1040RDB
  86 #define CONFIG_SYS_FSL_PBL_RCW \
  87 $(SRCTREE)/board/freescale/t104xrdb/t1040_spi_rcw.cfg
  88 #endif
  89 #ifdef CONFIG_TARGET_T1042RDB_PI
  90 #define CONFIG_SYS_FSL_PBL_RCW \
  91 $(SRCTREE)/board/freescale/t104xrdb/t1042_pi_spi_rcw.cfg
  92 #endif
  93 #ifdef CONFIG_TARGET_T1042RDB
  94 #define CONFIG_SYS_FSL_PBL_RCW \
  95 $(SRCTREE)/board/freescale/t104xrdb/t1042_spi_rcw.cfg
  96 #endif
  97 #ifdef CONFIG_TARGET_T1040D4RDB
  98 #define CONFIG_SYS_FSL_PBL_RCW \
  99 $(SRCTREE)/board/freescale/t104xrdb/t1040d4_spi_rcw.cfg
 100 #endif
 101 #ifdef CONFIG_TARGET_T1042D4RDB
 102 #define CONFIG_SYS_FSL_PBL_RCW \
 103 $(SRCTREE)/board/freescale/t104xrdb/t1042d4_spi_rcw.cfg
 104 #endif
 105 #endif
 106
 107 #ifdef CONFIG_SDCARD
 108 #define CONFIG_RESET_VECTOR_ADDRESS             0x30000FFC
 109 #define CONFIG_SYS_MMC_U_BOOT_SIZE      (768 << 10)
 110 #define CONFIG_SYS_MMC_U_BOOT_DST       (0x30000000)
 111 #define CONFIG_SYS_MMC_U_BOOT_START     (0x30000000)
 112 #define CONFIG_SYS_MMC_U_BOOT_OFFS      (260 << 10)
 113 #ifndef CONFIG_SPL_BUILD
 114 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
 115 #endif
 116 #ifdef CONFIG_TARGET_T1040RDB
 117 #define CONFIG_SYS_FSL_PBL_RCW \
 118 $(SRCTREE)/board/freescale/t104xrdb/t1040_sd_rcw.cfg
 119 #endif
 120 #ifdef CONFIG_TARGET_T1042RDB_PI
 121 #define CONFIG_SYS_FSL_PBL_RCW \
 122 $(SRCTREE)/board/freescale/t104xrdb/t1042_pi_sd_rcw.cfg
 123 #endif
 124 #ifdef CONFIG_TARGET_T1042RDB
 125 #define CONFIG_SYS_FSL_PBL_RCW \
 126 $(SRCTREE)/board/freescale/t104xrdb/t1042_sd_rcw.cfg
 127 #endif
 128 #ifdef CONFIG_TARGET_T1040D4RDB
 129 #define CONFIG_SYS_FSL_PBL_RCW \
 130 $(SRCTREE)/board/freescale/t104xrdb/t1040d4_sd_rcw.cfg
 131 #endif
 132 #ifdef CONFIG_TARGET_T1042D4RDB
 133 #define CONFIG_SYS_FSL_PBL_RCW \
 134 $(SRCTREE)/board/freescale/t104xrdb/t1042d4_sd_rcw.cfg
 135 #endif
 136 #endif
 137
 138 #endif
 139
 140 /* High Level Configuration Options */
 141 #define CONFIG_SYS_BOOK3E_HV            /* Category E.HV supported */
 142
 143 /* support deep sleep */
 144 #define CONFIG_DEEP_SLEEP
 145
 146 #ifndef CONFIG_RESET_VECTOR_ADDRESS
 147 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
 148 #endif
 149
 150 #define CONFIG_SYS_FSL_CPC              /* Corenet Platform Cache */
 151 #define CONFIG_SYS_NUM_CPC              CONFIG_SYS_NUM_DDR_CTLRS
 152 #define CONFIG_PCIE1                    /* PCIE controller 1 */
 153 #define CONFIG_PCIE2                    /* PCIE controller 2 */
 154 #define CONFIG_PCIE3                    /* PCIE controller 3 */
 155 #define CONFIG_PCIE4                    /* PCIE controller 4 */
 156
 157 #define CONFIG_SYS_PCI_64BIT            /* enable 64-bit PCI resources */
 158
 159 #define CONFIG_ENV_OVERWRITE
 160
 161 #if defined(CONFIG_SPIFLASH)
 162 #elif defined(CONFIG_SDCARD)
 163 #define CONFIG_SYS_MMC_ENV_DEV          0
 164 #elif defined(CONFIG_MTD_RAW_NAND)
 165 #ifdef CONFIG_NXP_ESBC
 166 #define CONFIG_RAMBOOT_NAND
 167 #define CONFIG_BOOTSCRIPT_COPY_RAM
 168 #endif
 169 #endif
 170
 171 #define CONFIG_SYS_CLK_FREQ     100000000
 172 #define CONFIG_DDR_CLK_FREQ     66666666
 173
 174 /*
 175  * These can be toggled for performance analysis, otherwise use default.
 176  */
 177 #define CONFIG_SYS_CACHE_STASHING
 178 #define CONFIG_BACKSIDE_L2_CACHE
 179 #define CONFIG_SYS_INIT_L2CSR0          L2CSR0_L2E
 180 #define CONFIG_BTB                      /* toggle branch predition */
 181 #define CONFIG_DDR_ECC
 182 #ifdef CONFIG_DDR_ECC
 183 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
 184 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
 185 #endif
 186
 187 #define CONFIG_ENABLE_36BIT_PHYS
 188
 189 #define CONFIG_ADDR_MAP
 190 #define CONFIG_SYS_NUM_ADDR_MAP         64      /* number of TLB1 entries */
 191
 192 /*
 193  *  Config the L3 Cache as L3 SRAM
 194  */
 195 #define CONFIG_SYS_INIT_L3_ADDR         0xFFFC0000
 196 /*
 197  * For Secure Boot CONFIG_SYS_INIT_L3_ADDR will be redefined and hence
 198  * Physical address (CONFIG_SYS_INIT_L3_ADDR) and virtual address
 199  * (CONFIG_SYS_INIT_L3_VADDR) will be different.
 200  */
 201 #define CONFIG_SYS_INIT_L3_VADDR        0xFFFC0000
 202 #define CONFIG_SYS_L3_SIZE              256 << 10
 203 #define CONFIG_SPL_GD_ADDR              (CONFIG_SYS_INIT_L3_VADDR + 32 * 1024)
 204 #define SPL_ENV_ADDR                    (CONFIG_SPL_GD_ADDR + 4 * 1024)
 205 #define CONFIG_SPL_RELOC_MALLOC_ADDR    (CONFIG_SPL_GD_ADDR + 12 * 1024)
 206 #define CONFIG_SPL_RELOC_MALLOC_SIZE    (30 << 10)
 207 #define CONFIG_SPL_RELOC_STACK          (CONFIG_SPL_GD_ADDR + 64 * 1024)
 208
 209 #define CONFIG_SYS_DCSRBAR              0xf0000000
 210 #define CONFIG_SYS_DCSRBAR_PHYS         0xf00000000ull
 211
 212 /*
 213  * DDR Setup
 214  */
 215 #define CONFIG_VERY_BIG_RAM
 216 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 217 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 218
 219 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 220 #define CONFIG_CHIP_SELECTS_PER_CTRL    (2 * CONFIG_DIMM_SLOTS_PER_CTLR)
 221
 222 #define CONFIG_DDR_SPD
 223
 224 #define CONFIG_SYS_SPD_BUS_NUM  0
 225 #define SPD_EEPROM_ADDRESS      0x51
 226
 227 #define CONFIG_SYS_SDRAM_SIZE   4096    /* for fixed parameter use */
 228
 229 /*
 230  * IFC Definitions
 231  */
 232 #define CONFIG_SYS_FLASH_BASE   0xe8000000
 233 #define CONFIG_SYS_FLASH_BASE_PHYS      (0xf00000000ull | CONFIG_SYS_FLASH_BASE)
 234
 235 #define CONFIG_SYS_NOR_CSPR_EXT (0xf)
 236 #define CONFIG_SYS_NOR_CSPR     (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE) | \
 237                                 CSPR_PORT_SIZE_16 | \
 238                                 CSPR_MSEL_NOR | \
 239                                 CSPR_V)
 240 #define CONFIG_SYS_NOR_AMASK    IFC_AMASK(128*1024*1024)
 241
 242 /*
 243  * TDM Definition
 244  */
 245 #define T1040_TDM_QUIRK_CCSR_BASE       0xfe000000
 246
 247 /* NOR Flash Timing Params */
 248 #define CONFIG_SYS_NOR_CSOR     CSOR_NAND_TRHZ_80
 249 #define CONFIG_SYS_NOR_FTIM0    (FTIM0_NOR_TACSE(0x4) | \
 250                                 FTIM0_NOR_TEADC(0x5) | \
 251                                 FTIM0_NOR_TEAHC(0x5))
 252 #define CONFIG_SYS_NOR_FTIM1    (FTIM1_NOR_TACO(0x35) | \
 253                                 FTIM1_NOR_TRAD_NOR(0x1A) |\
 254                                 FTIM1_NOR_TSEQRAD_NOR(0x13))
 255 #define CONFIG_SYS_NOR_FTIM2    (FTIM2_NOR_TCS(0x4) | \
 256                                 FTIM2_NOR_TCH(0x4) | \
 257                                 FTIM2_NOR_TWPH(0x0E) | \
 258                                 FTIM2_NOR_TWP(0x1c))
 259 #define CONFIG_SYS_NOR_FTIM3    0x0
 260
 261 #define CONFIG_SYS_FLASH_QUIET_TEST
 262 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
 263
 264 #define CONFIG_SYS_MAX_FLASH_BANKS      2       /* number of banks */
 265 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device */
 266 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 267 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 268
 269 #define CONFIG_SYS_FLASH_EMPTY_INFO
 270 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS}
 271
 272 /* CPLD on IFC */
 273 #define CPLD_LBMAP_MASK                 0x3F
 274 #define CPLD_BANK_SEL_MASK              0x07
 275 #define CPLD_BANK_OVERRIDE              0x40
 276 #define CPLD_LBMAP_ALTBANK              0x44 /* BANK OR | BANK 4 */
 277 #define CPLD_LBMAP_DFLTBANK             0x40 /* BANK OR | BANK0 */
 278 #define CPLD_LBMAP_RESET                0xFF
 279 #define CPLD_LBMAP_SHIFT                0x03
 280
 281 #if defined(CONFIG_TARGET_T1042RDB_PI)
 282 #define CPLD_DIU_SEL_DFP                0x80
 283 #elif defined(CONFIG_TARGET_T1042D4RDB)
 284 #define CPLD_DIU_SEL_DFP                0xc0
 285 #endif
 286
 287 #if defined(CONFIG_TARGET_T1040D4RDB)
 288 #define CPLD_INT_MASK_ALL               0xFF
 289 #define CPLD_INT_MASK_THERM             0x80
 290 #define CPLD_INT_MASK_DVI_DFP           0x40
 291 #define CPLD_INT_MASK_QSGMII1           0x20
 292 #define CPLD_INT_MASK_QSGMII2           0x10
 293 #define CPLD_INT_MASK_SGMI1             0x08
 294 #define CPLD_INT_MASK_SGMI2             0x04
 295 #define CPLD_INT_MASK_TDMR1             0x02
 296 #define CPLD_INT_MASK_TDMR2             0x01
 297 #endif
 298
 299 #define CONFIG_SYS_CPLD_BASE    0xffdf0000
 300 #define CONFIG_SYS_CPLD_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_CPLD_BASE)
 301 #define CONFIG_SYS_CSPR2_EXT    (0xf)
 302 #define CONFIG_SYS_CSPR2        (CSPR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE_PHYS) \
 303                                 | CSPR_PORT_SIZE_8 \
 304                                 | CSPR_MSEL_GPCM \
 305                                 | CSPR_V)
 306 #define CONFIG_SYS_AMASK2       IFC_AMASK(64*1024)
 307 #define CONFIG_SYS_CSOR2        0x0
 308 /* CPLD Timing parameters for IFC CS2 */
 309 #define CONFIG_SYS_CS2_FTIM0            (FTIM0_GPCM_TACSE(0x0e) | \
 310                                         FTIM0_GPCM_TEADC(0x0e) | \
 311                                         FTIM0_GPCM_TEAHC(0x0e))
 312 #define CONFIG_SYS_CS2_FTIM1            (FTIM1_GPCM_TACO(0x0e) | \
 313                                         FTIM1_GPCM_TRAD(0x1f))
 314 #define CONFIG_SYS_CS2_FTIM2            (FTIM2_GPCM_TCS(0x0e) | \
 315                                         FTIM2_GPCM_TCH(0x8) | \
 316                                         FTIM2_GPCM_TWP(0x1f))
 317 #define CONFIG_SYS_CS2_FTIM3            0x0
 318
 319 /* NAND Flash on IFC */
 320 #define CONFIG_NAND_FSL_IFC
 321 #define CONFIG_SYS_NAND_BASE            0xff800000
 322 #define CONFIG_SYS_NAND_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_NAND_BASE)
 323
 324 #define CONFIG_SYS_NAND_CSPR_EXT        (0xf)
 325 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 326                                 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
 327                                 | CSPR_MSEL_NAND        /* MSEL = NAND */ \
 328                                 | CSPR_V)
 329 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64*1024)
 330
 331 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 332                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 333                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
 334                                 | CSOR_NAND_RAL_3       /* RAL = 3Byes */ \
 335                                 | CSOR_NAND_PGS_4K      /* Page Size = 4K */ \
 336                                 | CSOR_NAND_SPRZ_224/* Spare size = 224 */ \
 337                                 | CSOR_NAND_PB(64))     /*Pages Per Block = 64*/
 338
 339 #define CONFIG_SYS_NAND_ONFI_DETECTION
 340
 341 /* ONFI NAND Flash mode0 Timing Params */
 342 #define CONFIG_SYS_NAND_FTIM0           (FTIM0_NAND_TCCST(0x07) | \
 343                                         FTIM0_NAND_TWP(0x18)   | \
 344                                         FTIM0_NAND_TWCHT(0x07) | \
 345                                         FTIM0_NAND_TWH(0x0a))
 346 #define CONFIG_SYS_NAND_FTIM1           (FTIM1_NAND_TADLE(0x32) | \
 347                                         FTIM1_NAND_TWBE(0x39)  | \
 348                                         FTIM1_NAND_TRR(0x0e)   | \
 349                                         FTIM1_NAND_TRP(0x18))
 350 #define CONFIG_SYS_NAND_FTIM2           (FTIM2_NAND_TRAD(0x0f) | \
 351                                         FTIM2_NAND_TREH(0x0a) | \
 352                                         FTIM2_NAND_TWHRE(0x1e))
 353 #define CONFIG_SYS_NAND_FTIM3           0x0
 354
 355 #define CONFIG_SYS_NAND_DDR_LAW         11
 356 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
 357 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 358
 359 #define CONFIG_SYS_NAND_BLOCK_SIZE      (512 * 1024)
 360
 361 #if defined(CONFIG_MTD_RAW_NAND)
 362 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NAND_CSPR_EXT
 363 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
 364 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
 365 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
 366 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
 367 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
 368 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
 369 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
 370 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR_CSPR_EXT
 371 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR_CSPR
 372 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
 373 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 374 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 375 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 376 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 377 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 378 #else
 379 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR_CSPR_EXT
 380 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR_CSPR
 381 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 382 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 383 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 384 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 385 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 386 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 387 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NAND_CSPR_EXT
 388 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NAND_CSPR
 389 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NAND_AMASK
 390 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NAND_CSOR
 391 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NAND_FTIM0
 392 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NAND_FTIM1
 393 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NAND_FTIM2
 394 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NAND_FTIM3
 395 #endif
 396
 397 #ifdef CONFIG_SPL_BUILD
 398 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
 399 #else
 400 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
 401 #endif
 402
 403 #if defined(CONFIG_RAMBOOT_PBL)
 404 #define CONFIG_SYS_RAMBOOT
 405 #endif
 406
 407 #ifdef CONFIG_SYS_FSL_ERRATUM_A008044
 408 #if defined(CONFIG_MTD_RAW_NAND)
 409 #define CONFIG_A008044_WORKAROUND
 410 #endif
 411 #endif
 412
 413 #define CONFIG_HWCONFIG
 414
 415 /* define to use L1 as initial stack */
 416 #define CONFIG_L1_INIT_RAM
 417 #define CONFIG_SYS_INIT_RAM_LOCK
 418 #define CONFIG_SYS_INIT_RAM_ADDR        0xfdd00000      /* Initial L1 address */
 419 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH      0xf
 420 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW       0xfe03c000
 421 /* The assembler doesn't like typecast */
 422 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
 423         ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
 424           CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
 425 #define CONFIG_SYS_INIT_RAM_SIZE                0x00004000
 426
 427 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - \
 428                                         GENERATED_GBL_DATA_SIZE)
 429 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 430
 431 #define CONFIG_SYS_MONITOR_LEN          (768 * 1024)
 432 #define CONFIG_SYS_MALLOC_LEN           (4 * 1024 * 1024)
 433
 434 /* Serial Port - controlled on board with jumper J8
 435  * open - index 2
 436  * shorted - index 1
 437  */
 438 #define CONFIG_SYS_NS16550_SERIAL
 439 #define CONFIG_SYS_NS16550_REG_SIZE     1
 440 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
 441
 442 #define CONFIG_SYS_BAUDRATE_TABLE       \
 443         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 444
 445 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
 446 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
 447 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
 448 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
 449
 450 #if defined(CONFIG_TARGET_T1042RDB_PI) || defined(CONFIG_TARGET_T1042D4RDB)
 451 /* Video */
 452 #define CONFIG_FSL_DIU_FB
 453
 454 #ifdef CONFIG_FSL_DIU_FB
 455 #define CONFIG_FSL_DIU_CH7301
 456 #define CONFIG_SYS_DIU_ADDR     (CONFIG_SYS_CCSRBAR + 0x180000)
 457 #define CONFIG_VIDEO_LOGO
 458 #define CONFIG_VIDEO_BMP_LOGO
 459 #endif
 460 #endif
 461
 462 /* I2C */
 463 #ifndef CONFIG_DM_I2C
 464 #define CONFIG_SYS_I2C
 465 #define CONFIG_SYS_FSL_I2C_SPEED        400000  /* I2C speed in Hz */
 466 #define CONFIG_SYS_FSL_I2C2_SPEED       400000
 467 #define CONFIG_SYS_FSL_I2C3_SPEED       400000
 468 #define CONFIG_SYS_FSL_I2C4_SPEED       400000
 469 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 470 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
 471 #define CONFIG_SYS_FSL_I2C3_SLAVE       0x7F
 472 #define CONFIG_SYS_FSL_I2C4_SLAVE       0x7F
 473 #define CONFIG_SYS_FSL_I2C_OFFSET       0x118000
 474 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x118100
 475 #define CONFIG_SYS_FSL_I2C3_OFFSET      0x119000
 476 #define CONFIG_SYS_FSL_I2C4_OFFSET      0x119100
 477 #else
 478 #define CONFIG_I2C_SET_DEFAULT_BUS_NUM
 479 #define CONFIG_I2C_DEFAULT_BUS_NUMBER   0
 480 #endif
 481
 482 #define CONFIG_SYS_I2C_FSL              /* Use FSL common I2C driver */
 483 /* I2C bus multiplexer */
 484 #define I2C_MUX_PCA_ADDR                0x70
 485 #define I2C_MUX_CH_DEFAULT      0x8
 486
 487 #if defined(CONFIG_TARGET_T1042RDB_PI)  || \
 488         defined(CONFIG_TARGET_T1040D4RDB)       || \
 489         defined(CONFIG_TARGET_T1042D4RDB)
 490 /* LDI/DVI Encoder for display */
 491 #define CONFIG_SYS_I2C_LDI_ADDR         0x38
 492 #define CONFIG_SYS_I2C_DVI_ADDR         0x75
 493 #define CONFIG_SYS_I2C_DVI_BUS_NUM      0
 494
 495 /*
 496  * RTC configuration
 497  */
 498 #define RTC
 499 #define CONFIG_RTC_DS1337               1
 500 #define CONFIG_SYS_I2C_RTC_ADDR         0x68
 501
 502 /*DVI encoder*/
 503 #define CONFIG_HDMI_ENCODER_I2C_ADDR  0x75
 504 #endif
 505
 506 /*
 507  * eSPI - Enhanced SPI
 508  */
 509
 510 /*
 511  * General PCI
 512  * Memory space is mapped 1-1, but I/O space must start from 0.
 513  */
 514
 515 #ifdef CONFIG_PCI
 516 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
 517 #ifdef CONFIG_PCIE1
 518 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
 519 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
 520 #define CONFIG_SYS_PCIE1_IO_VIRT        0xf8000000
 521 #define CONFIG_SYS_PCIE1_IO_PHYS        0xff8000000ull
 522 #endif
 523
 524 /* controller 2, Slot 2, tgtid 2, Base address 201000 */
 525 #ifdef CONFIG_PCIE2
 526 #define CONFIG_SYS_PCIE2_MEM_VIRT       0x90000000
 527 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc10000000ull
 528 #define CONFIG_SYS_PCIE2_IO_VIRT        0xf8010000
 529 #define CONFIG_SYS_PCIE2_IO_PHYS        0xff8010000ull
 530 #endif
 531
 532 /* controller 3, Slot 1, tgtid 1, Base address 202000 */
 533 #ifdef CONFIG_PCIE3
 534 #define CONFIG_SYS_PCIE3_MEM_VIRT       0xa0000000
 535 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc20000000ull
 536 #define CONFIG_SYS_PCIE3_IO_VIRT        0xf8020000
 537 #define CONFIG_SYS_PCIE3_IO_PHYS        0xff8020000ull
 538 #endif
 539
 540 /* controller 4, Base address 203000 */
 541 #ifdef CONFIG_PCIE4
 542 #define CONFIG_SYS_PCIE4_MEM_VIRT       0xb0000000
 543 #define CONFIG_SYS_PCIE4_MEM_PHYS       0xc30000000ull
 544 #define CONFIG_SYS_PCIE4_IO_VIRT        0xf8030000
 545 #define CONFIG_SYS_PCIE4_IO_PHYS        0xff8030000ull
 546 #endif
 547
 548 #if !defined(CONFIG_DM_PCI)
 549 #define CONFIG_FSL_PCI_INIT     /* Use common FSL init code */
 550 #define CONFIG_SYS_PCIE1_MEM_BUS        0xe0000000
 551 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x10000000      /* 256M */
 552 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 553 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 554 #define CONFIG_SYS_PCIE2_MEM_BUS        0xe0000000
 555 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x10000000      /* 256M */
 556 #define CONFIG_SYS_PCIE2_IO_BUS         0x00000000
 557 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00010000      /* 64k */
 558 #define CONFIG_SYS_PCIE3_MEM_BUS        0xe0000000
 559 #define CONFIG_SYS_PCIE3_MEM_SIZE       0x10000000      /* 256M */
 560 #define CONFIG_SYS_PCIE3_IO_BUS         0x00000000
 561 #define CONFIG_SYS_PCIE3_IO_SIZE        0x00010000      /* 64k */
 562 #define CONFIG_SYS_PCIE4_MEM_BUS        0xe0000000
 563 #define CONFIG_SYS_PCIE4_MEM_SIZE       0x10000000      /* 256M */
 564 #define CONFIG_SYS_PCIE4_IO_BUS         0x00000000
 565 #define CONFIG_SYS_PCIE4_IO_SIZE        0x00010000      /* 64k */
 566 #define CONFIG_PCI_INDIRECT_BRIDGE
 567 #endif
 568 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 569 #endif  /* CONFIG_PCI */
 570
 571 /* SATA */
 572 #define CONFIG_FSL_SATA_V2
 573 #ifdef CONFIG_FSL_SATA_V2
 574 #define CONFIG_SYS_SATA_MAX_DEVICE      1
 575 #define CONFIG_SATA1
 576 #define CONFIG_SYS_SATA1                CONFIG_SYS_MPC85xx_SATA1_ADDR
 577 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
 578
 579 #define CONFIG_LBA48
 580 #endif
 581
 582 /*
 583 * USB
 584 */
 585 #define CONFIG_HAS_FSL_DR_USB
 586
 587 #ifdef CONFIG_HAS_FSL_DR_USB
 588 #ifdef CONFIG_USB_EHCI_HCD
 589 #define CONFIG_USB_EHCI_FSL
 590 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 591 #endif
 592 #endif
 593
 594 #ifdef CONFIG_MMC
 595 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 596 #endif
 597
 598 /* Qman/Bman */
 599 #ifndef CONFIG_NOBQFMAN
 600 #define CONFIG_SYS_BMAN_NUM_PORTALS     10
 601 #define CONFIG_SYS_BMAN_MEM_BASE        0xf4000000
 602 #define CONFIG_SYS_BMAN_MEM_PHYS        0xff4000000ull
 603 #define CONFIG_SYS_BMAN_MEM_SIZE        0x02000000
 604 #define CONFIG_SYS_BMAN_SP_CENA_SIZE    0x4000
 605 #define CONFIG_SYS_BMAN_SP_CINH_SIZE    0x1000
 606 #define CONFIG_SYS_BMAN_CENA_BASE       CONFIG_SYS_BMAN_MEM_BASE
 607 #define CONFIG_SYS_BMAN_CENA_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 608 #define CONFIG_SYS_BMAN_CINH_BASE       (CONFIG_SYS_BMAN_MEM_BASE + \
 609                                         CONFIG_SYS_BMAN_CENA_SIZE)
 610 #define CONFIG_SYS_BMAN_CINH_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 611 #define CONFIG_SYS_BMAN_SWP_ISDR_REG    0xE08
 612 #define CONFIG_SYS_QMAN_NUM_PORTALS     10
 613 #define CONFIG_SYS_QMAN_MEM_BASE        0xf6000000
 614 #define CONFIG_SYS_QMAN_MEM_PHYS        0xff6000000ull
 615 #define CONFIG_SYS_QMAN_MEM_SIZE        0x02000000
 616 #define CONFIG_SYS_QMAN_SP_CENA_SIZE    0x4000
 617 #define CONFIG_SYS_QMAN_SP_CINH_SIZE    0x1000
 618 #define CONFIG_SYS_QMAN_CENA_BASE       CONFIG_SYS_QMAN_MEM_BASE
 619 #define CONFIG_SYS_QMAN_CENA_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 620 #define CONFIG_SYS_QMAN_CINH_BASE       (CONFIG_SYS_QMAN_MEM_BASE + \
 621                                         CONFIG_SYS_QMAN_CENA_SIZE)
 622 #define CONFIG_SYS_QMAN_CINH_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 623 #define CONFIG_SYS_QMAN_SWP_ISDR_REG    0xE08
 624
 625 #define CONFIG_SYS_DPAA_FMAN
 626 #define CONFIG_SYS_DPAA_PME
 627
 628 #define CONFIG_U_QE
 629
 630 /* Default address of microcode for the Linux Fman driver */
 631 #if defined(CONFIG_SPIFLASH)
 632 /*
 633  * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
 634  * env, so we got 0x110000.
 635  */
 636 #define CONFIG_SYS_FMAN_FW_ADDR 0x110000
 637 #elif defined(CONFIG_SDCARD)
 638 /*
 639  * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
 640  * about 1MB (2048 blocks), Env is stored after the image, and the env size is
 641  * 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 2080.
 642  */
 643 #define CONFIG_SYS_FMAN_FW_ADDR (512 * 0x820)
 644 #elif defined(CONFIG_MTD_RAW_NAND)
 645 #define CONFIG_SYS_FMAN_FW_ADDR (5 * CONFIG_SYS_NAND_BLOCK_SIZE)
 646 #else
 647 #define CONFIG_SYS_FMAN_FW_ADDR         0xEFF00000
 648 #endif
 649
 650 #if defined(CONFIG_SPIFLASH)
 651 #define CONFIG_SYS_QE_FW_ADDR           0x130000
 652 #elif defined(CONFIG_SDCARD)
 653 #define CONFIG_SYS_QE_FW_ADDR           (512 * 0x920)
 654 #elif defined(CONFIG_MTD_RAW_NAND)
 655 #define CONFIG_SYS_QE_FW_ADDR           (7 * CONFIG_SYS_NAND_BLOCK_SIZE)
 656 #else
 657 #define CONFIG_SYS_QE_FW_ADDR           0xEFF10000
 658 #endif
 659
 660 #define CONFIG_SYS_QE_FMAN_FW_LENGTH    0x10000
 661 #define CONFIG_SYS_FDT_PAD              (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 662 #endif /* CONFIG_NOBQFMAN */
 663
 664 #ifdef CONFIG_FMAN_ENET
 665 #if defined(CONFIG_TARGET_T1040RDB) || defined(CONFIG_TARGET_T1042RDB)
 666 #define CONFIG_SYS_SGMII1_PHY_ADDR             0x03
 667 #elif defined(CONFIG_TARGET_T1040D4RDB)
 668 #define CONFIG_SYS_SGMII1_PHY_ADDR             0x01
 669 #elif defined(CONFIG_TARGET_T1042D4RDB)
 670 #define CONFIG_SYS_SGMII1_PHY_ADDR             0x02
 671 #define CONFIG_SYS_SGMII2_PHY_ADDR             0x03
 672 #define CONFIG_SYS_SGMII3_PHY_ADDR             0x01
 673 #endif
 674
 675 #if defined(CONFIG_TARGET_T1040D4RDB) || defined(CONFIG_TARGET_T1042D4RDB)
 676 #define CONFIG_SYS_RGMII1_PHY_ADDR             0x04
 677 #define CONFIG_SYS_RGMII2_PHY_ADDR             0x05
 678 #else
 679 #define CONFIG_SYS_RGMII1_PHY_ADDR             0x01
 680 #define CONFIG_SYS_RGMII2_PHY_ADDR             0x02
 681 #endif
 682
 683 /* Enable VSC9953 L2 Switch driver on T1040 SoC */
 684 #if defined(CONFIG_TARGET_T1040RDB) || defined(CONFIG_TARGET_T1040D4RDB)
 685 #define CONFIG_VSC9953
 686 #ifdef CONFIG_TARGET_T1040RDB
 687 #define CONFIG_SYS_FM1_QSGMII11_PHY_ADDR        0x04
 688 #define CONFIG_SYS_FM1_QSGMII21_PHY_ADDR        0x08
 689 #else
 690 #define CONFIG_SYS_FM1_QSGMII11_PHY_ADDR        0x08
 691 #define CONFIG_SYS_FM1_QSGMII21_PHY_ADDR        0x0c
 692 #endif
 693 #endif
 694
 695 #define CONFIG_ETHPRIME         "FM1@DTSEC4"
 696 #endif
 697
 698 /*
 699  * Environment
 700  */
 701 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
 702 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 703
 704 /*
 705  * Miscellaneous configurable options
 706  */
 707 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 708
 709 /*
 710  * For booting Linux, the board info and command line data
 711  * have to be in the first 64 MB of memory, since this is
 712  * the maximum mapped by the Linux kernel during initialization.
 713  */
 714 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial map for Linux*/
 715 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 716
 717 #ifdef CONFIG_CMD_KGDB
 718 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 719 #endif
 720
 721 /*
 722  * Dynamic MTD Partition support with mtdparts
 723  */
 724
 725 /*
 726  * Environment Configuration
 727  */
 728 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 729 #define CONFIG_BOOTFILE         "uImage"
 730 #define CONFIG_UBOOTPATH        "u-boot.bin"    /* U-Boot image on TFTP server*/
 731
 732 /* default location for tftp and bootm */
 733 #define CONFIG_LOADADDR         1000000
 734
 735 #define __USB_PHY_TYPE  utmi
 736 #define RAMDISKFILE     "t104xrdb/ramdisk.uboot"
 737
 738 #ifdef CONFIG_TARGET_T1040RDB
 739 #define FDTFILE         "t1040rdb/t1040rdb.dtb"
 740 #elif defined(CONFIG_TARGET_T1042RDB_PI)
 741 #define FDTFILE         "t1042rdb_pi/t1042rdb_pi.dtb"
 742 #elif defined(CONFIG_TARGET_T1042RDB)
 743 #define FDTFILE         "t1042rdb/t1042rdb.dtb"
 744 #elif defined(CONFIG_TARGET_T1040D4RDB)
 745 #define FDTFILE         "t1042rdb/t1040d4rdb.dtb"
 746 #elif defined(CONFIG_TARGET_T1042D4RDB)
 747 #define FDTFILE         "t1042rdb/t1042d4rdb.dtb"
 748 #endif
 749
 750 #ifdef CONFIG_FSL_DIU_FB
 751 #define DIU_ENVIRONMENT "video-mode=fslfb:1024x768-32@60,monitor=dvi"
 752 #else
 753 #define DIU_ENVIRONMENT
 754 #endif
 755
 756 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 757         "hwconfig=fsl_ddr:bank_intlv=cs0_cs1;"                  \
 758         "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) ";"\
 759         "usb2:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
 760         "netdev=eth0\0"                                         \
 761         "video-mode=" __stringify(DIU_ENVIRONMENT) "\0"         \
 762         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"             \
 763         "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"     \
 764         "tftpflash=tftpboot $loadaddr $uboot && "               \
 765         "protect off $ubootaddr +$filesize && "                 \
 766         "erase $ubootaddr +$filesize && "                       \
 767         "cp.b $loadaddr $ubootaddr $filesize && "               \
 768         "protect on $ubootaddr +$filesize && "                  \
 769         "cmp.b $loadaddr $ubootaddr $filesize\0"                \
 770         "consoledev=ttyS0\0"                                    \
 771         "ramdiskaddr=2000000\0"                                 \
 772         "ramdiskfile=" __stringify(RAMDISKFILE) "\0"            \
 773         "fdtaddr=1e00000\0"                                     \
 774         "fdtfile=" __stringify(FDTFILE) "\0"                    \
 775         "bdev=sda3\0"
 776
 777 #define CONFIG_LINUX                       \
 778         "setenv bootargs root=/dev/ram rw "            \
 779         "console=$consoledev,$baudrate $othbootargs;"  \
 780         "setenv ramdiskaddr 0x02000000;"               \
 781         "setenv fdtaddr 0x00c00000;"                   \
 782         "setenv loadaddr 0x1000000;"                   \
 783         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 784
 785 #define CONFIG_HDBOOT                                   \
 786         "setenv bootargs root=/dev/$bdev rw "           \
 787         "console=$consoledev,$baudrate $othbootargs;"   \
 788         "tftp $loadaddr $bootfile;"                     \
 789         "tftp $fdtaddr $fdtfile;"                       \
 790         "bootm $loadaddr - $fdtaddr"
 791
 792 #define CONFIG_NFSBOOTCOMMAND                   \
 793         "setenv bootargs root=/dev/nfs rw "     \
 794         "nfsroot=$serverip:$rootpath "          \
 795         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 796         "console=$consoledev,$baudrate $othbootargs;"   \
 797         "tftp $loadaddr $bootfile;"             \
 798         "tftp $fdtaddr $fdtfile;"               \
 799         "bootm $loadaddr - $fdtaddr"
 800
 801 #define CONFIG_RAMBOOTCOMMAND                           \
 802         "setenv bootargs root=/dev/ram rw "             \
 803         "console=$consoledev,$baudrate $othbootargs;"   \
 804         "tftp $ramdiskaddr $ramdiskfile;"               \
 805         "tftp $loadaddr $bootfile;"                     \
 806         "tftp $fdtaddr $fdtfile;"                       \
 807         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 808
 809 #define CONFIG_BOOTCOMMAND              CONFIG_LINUX
 810
 811 #include <asm/fsl_secure_boot.h>
 812
 813 #endif  /* __CONFIG_H */