include/configs/T104xRDB.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright 2014 Freescale Semiconductor, Inc.
   4  * Copyright 2020-2021 NXP
   5  */
   6
   7 #ifndef __CONFIG_H
   8 #define __CONFIG_H
   9
  10 #include <linux/stringify.h>
  11
  12 /*
  13  * T104x RDB board configuration file
  14  */
  15 #include <asm/config_mpc85xx.h>
  16
  17 #ifdef CONFIG_RAMBOOT_PBL
  18 #define RESET_VECTOR_OFFSET             0x27FFC
  19 #define BOOT_PAGE_OFFSET                0x27000
  20
  21 #ifdef CONFIG_MTD_RAW_NAND
  22 #ifdef CONFIG_NXP_ESBC
  23 #define CONFIG_U_BOOT_HDR_SIZE          (16 << 10)
  24 /*
  25  * HDR would be appended at end of image and copied to DDR along
  26  * with U-Boot image.
  27  */
  28 #define CONFIG_SYS_NAND_U_BOOT_SIZE     ((768 << 10) + \
  29                                          CONFIG_U_BOOT_HDR_SIZE)
  30 #else
  31 #define CONFIG_SYS_NAND_U_BOOT_SIZE     (768 << 10)
  32 #endif
  33 #define CONFIG_SYS_NAND_U_BOOT_DST      0x30000000
  34 #define CONFIG_SYS_NAND_U_BOOT_START    0x30000000
  35 #endif
  36
  37 #ifdef CONFIG_SPIFLASH
  38 #define CONFIG_RESET_VECTOR_ADDRESS             0x30000FFC
  39 #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE        (768 << 10)
  40 #define CONFIG_SYS_SPI_FLASH_U_BOOT_DST         (0x30000000)
  41 #define CONFIG_SYS_SPI_FLASH_U_BOOT_START       (0x30000000)
  42 #define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS        (256 << 10)
  43 #endif
  44
  45 #ifdef CONFIG_SDCARD
  46 #define CONFIG_RESET_VECTOR_ADDRESS             0x30000FFC
  47 #define CONFIG_SYS_MMC_U_BOOT_SIZE      (768 << 10)
  48 #define CONFIG_SYS_MMC_U_BOOT_DST       (0x30000000)
  49 #define CONFIG_SYS_MMC_U_BOOT_START     (0x30000000)
  50 #define CONFIG_SYS_MMC_U_BOOT_OFFS      (260 << 10)
  51 #endif
  52
  53 #endif
  54
  55 /* High Level Configuration Options */
  56 #define CONFIG_SYS_BOOK3E_HV            /* Category E.HV supported */
  57
  58 #ifndef CONFIG_RESET_VECTOR_ADDRESS
  59 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
  60 #endif
  61
  62 #define CONFIG_SYS_FSL_CPC              /* Corenet Platform Cache */
  63 #define CONFIG_SYS_NUM_CPC              CONFIG_SYS_NUM_DDR_CTLRS
  64
  65 /*
  66  * These can be toggled for performance analysis, otherwise use default.
  67  */
  68 #define CONFIG_SYS_CACHE_STASHING
  69 #define CONFIG_SYS_INIT_L2CSR0          L2CSR0_L2E
  70 #ifdef CONFIG_DDR_ECC
  71 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
  72 #endif
  73
  74 /*
  75  *  Config the L3 Cache as L3 SRAM
  76  */
  77 #define CONFIG_SYS_INIT_L3_ADDR         0xFFFC0000
  78 /*
  79  * For Secure Boot CONFIG_SYS_INIT_L3_ADDR will be redefined and hence
  80  * Physical address (CONFIG_SYS_INIT_L3_ADDR) and virtual address
  81  * (CONFIG_SYS_INIT_L3_VADDR) will be different.
  82  */
  83 #define CONFIG_SYS_INIT_L3_VADDR        0xFFFC0000
  84 #define CONFIG_SYS_L3_SIZE              256 << 10
  85 #define SPL_ENV_ADDR                    (CONFIG_SPL_GD_ADDR + 4 * 1024)
  86
  87 #define CONFIG_SYS_DCSRBAR              0xf0000000
  88 #define CONFIG_SYS_DCSRBAR_PHYS         0xf00000000ull
  89
  90 /*
  91  * DDR Setup
  92  */
  93 #define CONFIG_VERY_BIG_RAM
  94 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
  95 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
  96
  97 #define SPD_EEPROM_ADDRESS      0x51
  98
  99 #define CONFIG_SYS_SDRAM_SIZE   4096    /* for fixed parameter use */
 100
 101 /*
 102  * IFC Definitions
 103  */
 104 #define CONFIG_SYS_FLASH_BASE   0xe8000000
 105 #define CONFIG_SYS_FLASH_BASE_PHYS      (0xf00000000ull | CONFIG_SYS_FLASH_BASE)
 106
 107 #define CONFIG_SYS_NOR_CSPR_EXT (0xf)
 108 #define CONFIG_SYS_NOR_CSPR     (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE) | \
 109                                 CSPR_PORT_SIZE_16 | \
 110                                 CSPR_MSEL_NOR | \
 111                                 CSPR_V)
 112 #define CONFIG_SYS_NOR_AMASK    IFC_AMASK(128*1024*1024)
 113
 114 /*
 115  * TDM Definition
 116  */
 117 #define T1040_TDM_QUIRK_CCSR_BASE       0xfe000000
 118
 119 /* NOR Flash Timing Params */
 120 #define CONFIG_SYS_NOR_CSOR     CSOR_NAND_TRHZ_80
 121 #define CONFIG_SYS_NOR_FTIM0    (FTIM0_NOR_TACSE(0x4) | \
 122                                 FTIM0_NOR_TEADC(0x5) | \
 123                                 FTIM0_NOR_TEAHC(0x5))
 124 #define CONFIG_SYS_NOR_FTIM1    (FTIM1_NOR_TACO(0x35) | \
 125                                 FTIM1_NOR_TRAD_NOR(0x1A) |\
 126                                 FTIM1_NOR_TSEQRAD_NOR(0x13))
 127 #define CONFIG_SYS_NOR_FTIM2    (FTIM2_NOR_TCS(0x4) | \
 128                                 FTIM2_NOR_TCH(0x4) | \
 129                                 FTIM2_NOR_TWPH(0x0E) | \
 130                                 FTIM2_NOR_TWP(0x1c))
 131 #define CONFIG_SYS_NOR_FTIM3    0x0
 132
 133 #define CONFIG_SYS_FLASH_QUIET_TEST
 134 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
 135
 136 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device */
 137 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 138 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 139
 140 #define CONFIG_SYS_FLASH_EMPTY_INFO
 141 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS}
 142
 143 /* CPLD on IFC */
 144 #define CPLD_LBMAP_MASK                 0x3F
 145 #define CPLD_BANK_SEL_MASK              0x07
 146 #define CPLD_BANK_OVERRIDE              0x40
 147 #define CPLD_LBMAP_ALTBANK              0x44 /* BANK OR | BANK 4 */
 148 #define CPLD_LBMAP_DFLTBANK             0x40 /* BANK OR | BANK0 */
 149 #define CPLD_LBMAP_RESET                0xFF
 150 #define CPLD_LBMAP_SHIFT                0x03
 151
 152 #if defined(CONFIG_TARGET_T1042RDB_PI)
 153 #define CPLD_DIU_SEL_DFP                0x80
 154 #elif defined(CONFIG_TARGET_T1042D4RDB)
 155 #define CPLD_DIU_SEL_DFP                0xc0
 156 #endif
 157
 158 #if defined(CONFIG_TARGET_T1040D4RDB)
 159 #define CPLD_INT_MASK_ALL               0xFF
 160 #define CPLD_INT_MASK_THERM             0x80
 161 #define CPLD_INT_MASK_DVI_DFP           0x40
 162 #define CPLD_INT_MASK_QSGMII1           0x20
 163 #define CPLD_INT_MASK_QSGMII2           0x10
 164 #define CPLD_INT_MASK_SGMI1             0x08
 165 #define CPLD_INT_MASK_SGMI2             0x04
 166 #define CPLD_INT_MASK_TDMR1             0x02
 167 #define CPLD_INT_MASK_TDMR2             0x01
 168 #endif
 169
 170 #define CONFIG_SYS_CPLD_BASE    0xffdf0000
 171 #define CONFIG_SYS_CPLD_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_CPLD_BASE)
 172 #define CONFIG_SYS_CSPR2_EXT    (0xf)
 173 #define CONFIG_SYS_CSPR2        (CSPR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE_PHYS) \
 174                                 | CSPR_PORT_SIZE_8 \
 175                                 | CSPR_MSEL_GPCM \
 176                                 | CSPR_V)
 177 #define CONFIG_SYS_AMASK2       IFC_AMASK(64*1024)
 178 #define CONFIG_SYS_CSOR2        0x0
 179 /* CPLD Timing parameters for IFC CS2 */
 180 #define CONFIG_SYS_CS2_FTIM0            (FTIM0_GPCM_TACSE(0x0e) | \
 181                                         FTIM0_GPCM_TEADC(0x0e) | \
 182                                         FTIM0_GPCM_TEAHC(0x0e))
 183 #define CONFIG_SYS_CS2_FTIM1            (FTIM1_GPCM_TACO(0x0e) | \
 184                                         FTIM1_GPCM_TRAD(0x1f))
 185 #define CONFIG_SYS_CS2_FTIM2            (FTIM2_GPCM_TCS(0x0e) | \
 186                                         FTIM2_GPCM_TCH(0x8) | \
 187                                         FTIM2_GPCM_TWP(0x1f))
 188 #define CONFIG_SYS_CS2_FTIM3            0x0
 189
 190 /* NAND Flash on IFC */
 191 #define CONFIG_SYS_NAND_BASE            0xff800000
 192 #define CONFIG_SYS_NAND_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_NAND_BASE)
 193
 194 #define CONFIG_SYS_NAND_CSPR_EXT        (0xf)
 195 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 196                                 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
 197                                 | CSPR_MSEL_NAND        /* MSEL = NAND */ \
 198                                 | CSPR_V)
 199 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64*1024)
 200
 201 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 202                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 203                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
 204                                 | CSOR_NAND_RAL_3       /* RAL = 3Byes */ \
 205                                 | CSOR_NAND_PGS_4K      /* Page Size = 4K */ \
 206                                 | CSOR_NAND_SPRZ_224/* Spare size = 224 */ \
 207                                 | CSOR_NAND_PB(64))     /*Pages Per Block = 64*/
 208
 209 /* ONFI NAND Flash mode0 Timing Params */
 210 #define CONFIG_SYS_NAND_FTIM0           (FTIM0_NAND_TCCST(0x07) | \
 211                                         FTIM0_NAND_TWP(0x18)   | \
 212                                         FTIM0_NAND_TWCHT(0x07) | \
 213                                         FTIM0_NAND_TWH(0x0a))
 214 #define CONFIG_SYS_NAND_FTIM1           (FTIM1_NAND_TADLE(0x32) | \
 215                                         FTIM1_NAND_TWBE(0x39)  | \
 216                                         FTIM1_NAND_TRR(0x0e)   | \
 217                                         FTIM1_NAND_TRP(0x18))
 218 #define CONFIG_SYS_NAND_FTIM2           (FTIM2_NAND_TRAD(0x0f) | \
 219                                         FTIM2_NAND_TREH(0x0a) | \
 220                                         FTIM2_NAND_TWHRE(0x1e))
 221 #define CONFIG_SYS_NAND_FTIM3           0x0
 222
 223 #define CONFIG_SYS_NAND_DDR_LAW         11
 224 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
 225 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 226
 227 #if defined(CONFIG_MTD_RAW_NAND)
 228 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NAND_CSPR_EXT
 229 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
 230 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
 231 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
 232 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
 233 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
 234 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
 235 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
 236 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR_CSPR_EXT
 237 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR_CSPR
 238 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
 239 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 240 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 241 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 242 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 243 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 244 #else
 245 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR_CSPR_EXT
 246 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR_CSPR
 247 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 248 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 249 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 250 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 251 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 252 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 253 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NAND_CSPR_EXT
 254 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NAND_CSPR
 255 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NAND_AMASK
 256 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NAND_CSOR
 257 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NAND_FTIM0
 258 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NAND_FTIM1
 259 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NAND_FTIM2
 260 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NAND_FTIM3
 261 #endif
 262
 263 #if defined(CONFIG_RAMBOOT_PBL)
 264 #define CONFIG_SYS_RAMBOOT
 265 #endif
 266
 267 #define CONFIG_HWCONFIG
 268
 269 /* define to use L1 as initial stack */
 270 #define CONFIG_L1_INIT_RAM
 271 #define CONFIG_SYS_INIT_RAM_LOCK
 272 #define CONFIG_SYS_INIT_RAM_ADDR        0xfdd00000      /* Initial L1 address */
 273 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH      0xf
 274 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW       0xfe03c000
 275 /* The assembler doesn't like typecast */
 276 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
 277         ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
 278           CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
 279 #define CONFIG_SYS_INIT_RAM_SIZE                0x00004000
 280
 281 #define CONFIG_SYS_INIT_SP_OFFSET       (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 282
 283 #define CONFIG_SYS_MONITOR_LEN          (768 * 1024)
 284
 285 /* Serial Port - controlled on board with jumper J8
 286  * open - index 2
 287  * shorted - index 1
 288  */
 289 #define CONFIG_SYS_NS16550_SERIAL
 290 #define CONFIG_SYS_NS16550_REG_SIZE     1
 291 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
 292
 293 #define CONFIG_SYS_BAUDRATE_TABLE       \
 294         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 295
 296 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
 297 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
 298 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
 299 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
 300
 301 /* I2C bus multiplexer */
 302 #define I2C_MUX_PCA_ADDR                0x70
 303 #define I2C_MUX_CH_DEFAULT      0x8
 304
 305 #if defined(CONFIG_TARGET_T1042RDB_PI)  || \
 306         defined(CONFIG_TARGET_T1040D4RDB)       || \
 307         defined(CONFIG_TARGET_T1042D4RDB)
 308 /* LDI/DVI Encoder for display */
 309 #define CONFIG_SYS_I2C_LDI_ADDR         0x38
 310 #define CONFIG_SYS_I2C_DVI_ADDR         0x75
 311 #define CONFIG_SYS_I2C_DVI_BUS_NUM      0
 312
 313 /*
 314  * RTC configuration
 315  */
 316 #define RTC
 317 #define CONFIG_RTC_DS1337               1
 318 #define CONFIG_SYS_I2C_RTC_ADDR         0x68
 319
 320 /*DVI encoder*/
 321 #define CONFIG_HDMI_ENCODER_I2C_ADDR  0x75
 322 #endif
 323
 324 /*
 325  * eSPI - Enhanced SPI
 326  */
 327
 328 /*
 329  * General PCI
 330  * Memory space is mapped 1-1, but I/O space must start from 0.
 331  */
 332
 333 #ifdef CONFIG_PCI
 334 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
 335 #ifdef CONFIG_PCIE1
 336 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
 337 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
 338 #define CONFIG_SYS_PCIE1_IO_VIRT        0xf8000000
 339 #define CONFIG_SYS_PCIE1_IO_PHYS        0xff8000000ull
 340 #endif
 341
 342 /* controller 2, Slot 2, tgtid 2, Base address 201000 */
 343 #ifdef CONFIG_PCIE2
 344 #define CONFIG_SYS_PCIE2_MEM_VIRT       0x90000000
 345 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc10000000ull
 346 #define CONFIG_SYS_PCIE2_IO_VIRT        0xf8010000
 347 #define CONFIG_SYS_PCIE2_IO_PHYS        0xff8010000ull
 348 #endif
 349
 350 /* controller 3, Slot 1, tgtid 1, Base address 202000 */
 351 #ifdef CONFIG_PCIE3
 352 #define CONFIG_SYS_PCIE3_MEM_VIRT       0xa0000000
 353 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc20000000ull
 354 #define CONFIG_SYS_PCIE3_IO_VIRT        0xf8020000
 355 #define CONFIG_SYS_PCIE3_IO_PHYS        0xff8020000ull
 356 #endif
 357
 358 /* controller 4, Base address 203000 */
 359 #ifdef CONFIG_PCIE4
 360 #define CONFIG_SYS_PCIE4_MEM_VIRT       0xb0000000
 361 #define CONFIG_SYS_PCIE4_MEM_PHYS       0xc30000000ull
 362 #define CONFIG_SYS_PCIE4_IO_VIRT        0xf8030000
 363 #define CONFIG_SYS_PCIE4_IO_PHYS        0xff8030000ull
 364 #endif
 365 #endif  /* CONFIG_PCI */
 366
 367 /*
 368 * USB
 369 */
 370
 371 #ifdef CONFIG_MMC
 372 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 373 #endif
 374
 375 /* Qman/Bman */
 376 #ifndef CONFIG_NOBQFMAN
 377 #define CONFIG_SYS_BMAN_NUM_PORTALS     10
 378 #define CONFIG_SYS_BMAN_MEM_BASE        0xf4000000
 379 #define CONFIG_SYS_BMAN_MEM_PHYS        0xff4000000ull
 380 #define CONFIG_SYS_BMAN_MEM_SIZE        0x02000000
 381 #define CONFIG_SYS_BMAN_SP_CENA_SIZE    0x4000
 382 #define CONFIG_SYS_BMAN_SP_CINH_SIZE    0x1000
 383 #define CONFIG_SYS_BMAN_CENA_BASE       CONFIG_SYS_BMAN_MEM_BASE
 384 #define CONFIG_SYS_BMAN_CENA_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 385 #define CONFIG_SYS_BMAN_CINH_BASE       (CONFIG_SYS_BMAN_MEM_BASE + \
 386                                         CONFIG_SYS_BMAN_CENA_SIZE)
 387 #define CONFIG_SYS_BMAN_CINH_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 388 #define CONFIG_SYS_BMAN_SWP_ISDR_REG    0xE08
 389 #define CONFIG_SYS_QMAN_NUM_PORTALS     10
 390 #define CONFIG_SYS_QMAN_MEM_BASE        0xf6000000
 391 #define CONFIG_SYS_QMAN_MEM_PHYS        0xff6000000ull
 392 #define CONFIG_SYS_QMAN_MEM_SIZE        0x02000000
 393 #define CONFIG_SYS_QMAN_SP_CENA_SIZE    0x4000
 394 #define CONFIG_SYS_QMAN_SP_CINH_SIZE    0x1000
 395 #define CONFIG_SYS_QMAN_CENA_BASE       CONFIG_SYS_QMAN_MEM_BASE
 396 #define CONFIG_SYS_QMAN_CENA_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 397 #define CONFIG_SYS_QMAN_CINH_BASE       (CONFIG_SYS_QMAN_MEM_BASE + \
 398                                         CONFIG_SYS_QMAN_CENA_SIZE)
 399 #define CONFIG_SYS_QMAN_CINH_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 400 #define CONFIG_SYS_QMAN_SWP_ISDR_REG    0xE08
 401
 402 #define CONFIG_SYS_DPAA_FMAN
 403 #define CONFIG_SYS_DPAA_PME
 404
 405 #define CONFIG_SYS_FDT_PAD              (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 406 #endif /* CONFIG_NOBQFMAN */
 407
 408 #ifdef CONFIG_FMAN_ENET
 409 #if defined(CONFIG_TARGET_T1040RDB) || defined(CONFIG_TARGET_T1042RDB)
 410 #define CONFIG_SYS_SGMII1_PHY_ADDR             0x03
 411 #elif defined(CONFIG_TARGET_T1040D4RDB)
 412 #define CONFIG_SYS_SGMII1_PHY_ADDR             0x01
 413 #elif defined(CONFIG_TARGET_T1042D4RDB)
 414 #define CONFIG_SYS_SGMII1_PHY_ADDR             0x02
 415 #define CONFIG_SYS_SGMII2_PHY_ADDR             0x03
 416 #define CONFIG_SYS_SGMII3_PHY_ADDR             0x01
 417 #endif
 418
 419 #if defined(CONFIG_TARGET_T1040D4RDB) || defined(CONFIG_TARGET_T1042D4RDB)
 420 #define CONFIG_SYS_RGMII1_PHY_ADDR             0x04
 421 #define CONFIG_SYS_RGMII2_PHY_ADDR             0x05
 422 #else
 423 #define CONFIG_SYS_RGMII1_PHY_ADDR             0x01
 424 #define CONFIG_SYS_RGMII2_PHY_ADDR             0x02
 425 #endif
 426
 427 /* Enable VSC9953 L2 Switch driver on T1040 SoC */
 428 #if defined(CONFIG_TARGET_T1040RDB) || defined(CONFIG_TARGET_T1040D4RDB)
 429 #define CONFIG_VSC9953
 430 #ifdef CONFIG_TARGET_T1040RDB
 431 #define CONFIG_SYS_FM1_QSGMII11_PHY_ADDR        0x04
 432 #define CONFIG_SYS_FM1_QSGMII21_PHY_ADDR        0x08
 433 #else
 434 #define CONFIG_SYS_FM1_QSGMII11_PHY_ADDR        0x08
 435 #define CONFIG_SYS_FM1_QSGMII21_PHY_ADDR        0x0c
 436 #endif
 437 #endif
 438 #endif
 439
 440 /*
 441  * Environment
 442  */
 443 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
 444 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 445
 446 /*
 447  * Miscellaneous configurable options
 448  */
 449
 450 /*
 451  * For booting Linux, the board info and command line data
 452  * have to be in the first 64 MB of memory, since this is
 453  * the maximum mapped by the Linux kernel during initialization.
 454  */
 455 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial map for Linux*/
 456 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 457
 458 /*
 459  * Dynamic MTD Partition support with mtdparts
 460  */
 461
 462 /*
 463  * Environment Configuration
 464  */
 465 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 466 #define CONFIG_UBOOTPATH        "u-boot.bin"    /* U-Boot image on TFTP server*/
 467
 468 #define __USB_PHY_TYPE  utmi
 469 #define RAMDISKFILE     "t104xrdb/ramdisk.uboot"
 470
 471 #ifdef CONFIG_TARGET_T1040RDB
 472 #define FDTFILE         "t1040rdb/t1040rdb.dtb"
 473 #elif defined(CONFIG_TARGET_T1042RDB_PI)
 474 #define FDTFILE         "t1042rdb_pi/t1042rdb_pi.dtb"
 475 #elif defined(CONFIG_TARGET_T1042RDB)
 476 #define FDTFILE         "t1042rdb/t1042rdb.dtb"
 477 #elif defined(CONFIG_TARGET_T1040D4RDB)
 478 #define FDTFILE         "t1042rdb/t1040d4rdb.dtb"
 479 #elif defined(CONFIG_TARGET_T1042D4RDB)
 480 #define FDTFILE         "t1042rdb/t1042d4rdb.dtb"
 481 #endif
 482
 483 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 484         "hwconfig=fsl_ddr:bank_intlv=cs0_cs1;"                  \
 485         "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) ";"\
 486         "usb2:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
 487         "netdev=eth0\0"                                         \
 488         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"             \
 489         "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"     \
 490         "tftpflash=tftpboot $loadaddr $uboot && "               \
 491         "protect off $ubootaddr +$filesize && "                 \
 492         "erase $ubootaddr +$filesize && "                       \
 493         "cp.b $loadaddr $ubootaddr $filesize && "               \
 494         "protect on $ubootaddr +$filesize && "                  \
 495         "cmp.b $loadaddr $ubootaddr $filesize\0"                \
 496         "consoledev=ttyS0\0"                                    \
 497         "ramdiskaddr=2000000\0"                                 \
 498         "ramdiskfile=" __stringify(RAMDISKFILE) "\0"            \
 499         "fdtaddr=1e00000\0"                                     \
 500         "fdtfile=" __stringify(FDTFILE) "\0"                    \
 501         "bdev=sda3\0"
 502
 503 #include <asm/fsl_secure_boot.h>
 504
 505 #endif  /* __CONFIG_H */