include/configs/T104xRDB.h

   1 /*
   2 + * Copyright 2014 Freescale Semiconductor, Inc.
   3 + *
   4 + * SPDX-License-Identifier:     GPL-2.0+
   5 + */
   6
   7 #ifndef __CONFIG_H
   8 #define __CONFIG_H
   9
  10 /*
  11  * T104x RDB board configuration file
  12  */
  13 #include <asm/config_mpc85xx.h>
  14
  15 #ifdef CONFIG_RAMBOOT_PBL
  16
  17 #ifndef CONFIG_SECURE_BOOT
  18 #define CONFIG_SYS_FSL_PBL_PBI $(SRCTREE)/board/freescale/t104xrdb/t104x_pbi.cfg
  19 #else
  20 #define CONFIG_SYS_FSL_PBL_PBI \
  21                 $(SRCTREE)/board/freescale/t104xrdb/t104x_pbi_sb.cfg
  22 #endif
  23
  24 #define CONFIG_SPL_FLUSH_IMAGE
  25 #define CONFIG_SPL_TARGET               "u-boot-with-spl.bin"
  26 #define CONFIG_SYS_TEXT_BASE            0x30001000
  27 #define CONFIG_SPL_TEXT_BASE            0xFFFD8000
  28 #define CONFIG_SPL_PAD_TO               0x40000
  29 #define CONFIG_SPL_MAX_SIZE             0x28000
  30 #ifdef CONFIG_SPL_BUILD
  31 #define CONFIG_SPL_SKIP_RELOCATE
  32 #define CONFIG_SPL_COMMON_INIT_DDR
  33 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
  34 #endif
  35 #define RESET_VECTOR_OFFSET             0x27FFC
  36 #define BOOT_PAGE_OFFSET                0x27000
  37
  38 #ifdef CONFIG_NAND
  39 #ifdef CONFIG_SECURE_BOOT
  40 #define CONFIG_U_BOOT_HDR_SIZE          (16 << 10)
  41 /*
  42  * HDR would be appended at end of image and copied to DDR along
  43  * with U-Boot image.
  44  */
  45 #define CONFIG_SYS_NAND_U_BOOT_SIZE     ((768 << 10) + \
  46                                          CONFIG_U_BOOT_HDR_SIZE)
  47 #else
  48 #define CONFIG_SYS_NAND_U_BOOT_SIZE     (768 << 10)
  49 #endif
  50 #define CONFIG_SYS_NAND_U_BOOT_DST      0x30000000
  51 #define CONFIG_SYS_NAND_U_BOOT_START    0x30000000
  52 #define CONFIG_SYS_NAND_U_BOOT_OFFS     (256 << 10)
  53 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
  54 #ifdef CONFIG_TARGET_T1040RDB
  55 #define CONFIG_SYS_FSL_PBL_RCW \
  56 $(SRCTREE)/board/freescale/t104xrdb/t1040_nand_rcw.cfg
  57 #endif
  58 #ifdef CONFIG_TARGET_T1042RDB_PI
  59 #define CONFIG_SYS_FSL_PBL_RCW \
  60 $(SRCTREE)/board/freescale/t104xrdb/t1042_pi_nand_rcw.cfg
  61 #endif
  62 #ifdef CONFIG_TARGET_T1042RDB
  63 #define CONFIG_SYS_FSL_PBL_RCW \
  64 $(SRCTREE)/board/freescale/t104xrdb/t1042_nand_rcw.cfg
  65 #endif
  66 #ifdef CONFIG_TARGET_T1040D4RDB
  67 #define CONFIG_SYS_FSL_PBL_RCW \
  68 $(SRCTREE)/board/freescale/t104xrdb/t1040d4_nand_rcw.cfg
  69 #endif
  70 #ifdef CONFIG_TARGET_T1042D4RDB
  71 #define CONFIG_SYS_FSL_PBL_RCW \
  72 $(SRCTREE)/board/freescale/t104xrdb/t1042d4_nand_rcw.cfg
  73 #endif
  74 #define CONFIG_SPL_NAND_BOOT
  75 #endif
  76
  77 #ifdef CONFIG_SPIFLASH
  78 #define CONFIG_RESET_VECTOR_ADDRESS             0x30000FFC
  79 #define CONFIG_SPL_SPI_FLASH_MINIMAL
  80 #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE        (768 << 10)
  81 #define CONFIG_SYS_SPI_FLASH_U_BOOT_DST         (0x30000000)
  82 #define CONFIG_SYS_SPI_FLASH_U_BOOT_START       (0x30000000)
  83 #define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS        (256 << 10)
  84 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot.lds"
  85 #ifndef CONFIG_SPL_BUILD
  86 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
  87 #endif
  88 #ifdef CONFIG_TARGET_T1040RDB
  89 #define CONFIG_SYS_FSL_PBL_RCW \
  90 $(SRCTREE)/board/freescale/t104xrdb/t1040_spi_rcw.cfg
  91 #endif
  92 #ifdef CONFIG_TARGET_T1042RDB_PI
  93 #define CONFIG_SYS_FSL_PBL_RCW \
  94 $(SRCTREE)/board/freescale/t104xrdb/t1042_pi_spi_rcw.cfg
  95 #endif
  96 #ifdef CONFIG_TARGET_T1042RDB
  97 #define CONFIG_SYS_FSL_PBL_RCW \
  98 $(SRCTREE)/board/freescale/t104xrdb/t1042_spi_rcw.cfg
  99 #endif
 100 #ifdef CONFIG_TARGET_T1040D4RDB
 101 #define CONFIG_SYS_FSL_PBL_RCW \
 102 $(SRCTREE)/board/freescale/t104xrdb/t1040d4_spi_rcw.cfg
 103 #endif
 104 #ifdef CONFIG_TARGET_T1042D4RDB
 105 #define CONFIG_SYS_FSL_PBL_RCW \
 106 $(SRCTREE)/board/freescale/t104xrdb/t1042d4_spi_rcw.cfg
 107 #endif
 108 #define CONFIG_SPL_SPI_BOOT
 109 #endif
 110
 111 #ifdef CONFIG_SDCARD
 112 #define CONFIG_RESET_VECTOR_ADDRESS             0x30000FFC
 113 #define CONFIG_SPL_MMC_MINIMAL
 114 #define CONFIG_SYS_MMC_U_BOOT_SIZE      (768 << 10)
 115 #define CONFIG_SYS_MMC_U_BOOT_DST       (0x30000000)
 116 #define CONFIG_SYS_MMC_U_BOOT_START     (0x30000000)
 117 #define CONFIG_SYS_MMC_U_BOOT_OFFS      (260 << 10)
 118 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot.lds"
 119 #ifndef CONFIG_SPL_BUILD
 120 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
 121 #endif
 122 #ifdef CONFIG_TARGET_T1040RDB
 123 #define CONFIG_SYS_FSL_PBL_RCW \
 124 $(SRCTREE)/board/freescale/t104xrdb/t1040_sd_rcw.cfg
 125 #endif
 126 #ifdef CONFIG_TARGET_T1042RDB_PI
 127 #define CONFIG_SYS_FSL_PBL_RCW \
 128 $(SRCTREE)/board/freescale/t104xrdb/t1042_pi_sd_rcw.cfg
 129 #endif
 130 #ifdef CONFIG_TARGET_T1042RDB
 131 #define CONFIG_SYS_FSL_PBL_RCW \
 132 $(SRCTREE)/board/freescale/t104xrdb/t1042_sd_rcw.cfg
 133 #endif
 134 #ifdef CONFIG_TARGET_T1040D4RDB
 135 #define CONFIG_SYS_FSL_PBL_RCW \
 136 $(SRCTREE)/board/freescale/t104xrdb/t1040d4_sd_rcw.cfg
 137 #endif
 138 #ifdef CONFIG_TARGET_T1042D4RDB
 139 #define CONFIG_SYS_FSL_PBL_RCW \
 140 $(SRCTREE)/board/freescale/t104xrdb/t1042d4_sd_rcw.cfg
 141 #endif
 142 #define CONFIG_SPL_MMC_BOOT
 143 #endif
 144
 145 #endif
 146
 147 /* High Level Configuration Options */
 148 #define CONFIG_SYS_BOOK3E_HV            /* Category E.HV supported */
 149 #define CONFIG_MP                       /* support multiple processors */
 150
 151 /* support deep sleep */
 152 #define CONFIG_DEEP_SLEEP
 153
 154 #ifndef CONFIG_SYS_TEXT_BASE
 155 #define CONFIG_SYS_TEXT_BASE    0xeff40000
 156 #endif
 157
 158 #ifndef CONFIG_RESET_VECTOR_ADDRESS
 159 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
 160 #endif
 161
 162 #define CONFIG_SYS_FSL_CPC              /* Corenet Platform Cache */
 163 #define CONFIG_SYS_NUM_CPC              CONFIG_SYS_NUM_DDR_CTLRS
 164 #define CONFIG_PCI_INDIRECT_BRIDGE
 165 #define CONFIG_PCIE1                    /* PCIE controller 1 */
 166 #define CONFIG_PCIE2                    /* PCIE controller 2 */
 167 #define CONFIG_PCIE3                    /* PCIE controller 3 */
 168 #define CONFIG_PCIE4                    /* PCIE controller 4 */
 169
 170 #define CONFIG_FSL_PCI_INIT             /* Use common FSL init code */
 171 #define CONFIG_SYS_PCI_64BIT            /* enable 64-bit PCI resources */
 172
 173 #define CONFIG_ENV_OVERWRITE
 174
 175 #ifdef CONFIG_MTD_NOR_FLASH
 176 #define CONFIG_FLASH_CFI_DRIVER
 177 #define CONFIG_SYS_FLASH_CFI
 178 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 179 #endif
 180
 181 #if defined(CONFIG_SPIFLASH)
 182 #define CONFIG_SYS_EXTRA_ENV_RELOC
 183 #define CONFIG_ENV_SIZE                 0x2000          /* 8KB */
 184 #define CONFIG_ENV_OFFSET               0x100000        /* 1MB */
 185 #define CONFIG_ENV_SECT_SIZE            0x10000
 186 #elif defined(CONFIG_SDCARD)
 187 #define CONFIG_SYS_EXTRA_ENV_RELOC
 188 #define CONFIG_SYS_MMC_ENV_DEV          0
 189 #define CONFIG_ENV_SIZE                 0x2000
 190 #define CONFIG_ENV_OFFSET               (512 * 0x800)
 191 #elif defined(CONFIG_NAND)
 192 #ifdef CONFIG_SECURE_BOOT
 193 #define CONFIG_RAMBOOT_NAND
 194 #define CONFIG_BOOTSCRIPT_COPY_RAM
 195 #endif
 196 #define CONFIG_SYS_EXTRA_ENV_RELOC
 197 #define CONFIG_ENV_SIZE                 0x2000
 198 #define CONFIG_ENV_OFFSET               (3 * CONFIG_SYS_NAND_BLOCK_SIZE)
 199 #else
 200 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 201 #define CONFIG_ENV_SIZE         0x2000
 202 #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
 203 #endif
 204
 205 #define CONFIG_SYS_CLK_FREQ     100000000
 206 #define CONFIG_DDR_CLK_FREQ     66666666
 207
 208 /*
 209  * These can be toggled for performance analysis, otherwise use default.
 210  */
 211 #define CONFIG_SYS_CACHE_STASHING
 212 #define CONFIG_BACKSIDE_L2_CACHE
 213 #define CONFIG_SYS_INIT_L2CSR0          L2CSR0_L2E
 214 #define CONFIG_BTB                      /* toggle branch predition */
 215 #define CONFIG_DDR_ECC
 216 #ifdef CONFIG_DDR_ECC
 217 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
 218 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
 219 #endif
 220
 221 #define CONFIG_ENABLE_36BIT_PHYS
 222
 223 #define CONFIG_ADDR_MAP
 224 #define CONFIG_SYS_NUM_ADDR_MAP         64      /* number of TLB1 entries */
 225
 226 #define CONFIG_SYS_MEMTEST_START        0x00200000      /* memtest works on */
 227 #define CONFIG_SYS_MEMTEST_END          0x00400000
 228 #define CONFIG_SYS_ALT_MEMTEST
 229
 230 /*
 231  *  Config the L3 Cache as L3 SRAM
 232  */
 233 #define CONFIG_SYS_INIT_L3_ADDR         0xFFFC0000
 234 /*
 235  * For Secure Boot CONFIG_SYS_INIT_L3_ADDR will be redefined and hence
 236  * Physical address (CONFIG_SYS_INIT_L3_ADDR) and virtual address
 237  * (CONFIG_SYS_INIT_L3_VADDR) will be different.
 238  */
 239 #define CONFIG_SYS_INIT_L3_VADDR        0xFFFC0000
 240 #define CONFIG_SYS_L3_SIZE              256 << 10
 241 #define CONFIG_SPL_GD_ADDR              (CONFIG_SYS_INIT_L3_VADDR + 32 * 1024)
 242 #ifdef CONFIG_RAMBOOT_PBL
 243 #define CONFIG_ENV_ADDR                 (CONFIG_SPL_GD_ADDR + 4 * 1024)
 244 #endif
 245 #define CONFIG_SPL_RELOC_MALLOC_ADDR    (CONFIG_SPL_GD_ADDR + 12 * 1024)
 246 #define CONFIG_SPL_RELOC_MALLOC_SIZE    (30 << 10)
 247 #define CONFIG_SPL_RELOC_STACK          (CONFIG_SPL_GD_ADDR + 64 * 1024)
 248 #define CONFIG_SPL_RELOC_STACK_SIZE     (22 << 10)
 249
 250 #define CONFIG_SYS_DCSRBAR              0xf0000000
 251 #define CONFIG_SYS_DCSRBAR_PHYS         0xf00000000ull
 252
 253 /*
 254  * DDR Setup
 255  */
 256 #define CONFIG_VERY_BIG_RAM
 257 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 258 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 259
 260 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 261 #define CONFIG_CHIP_SELECTS_PER_CTRL    (2 * CONFIG_DIMM_SLOTS_PER_CTLR)
 262
 263 #define CONFIG_DDR_SPD
 264
 265 #define CONFIG_SYS_SPD_BUS_NUM  0
 266 #define SPD_EEPROM_ADDRESS      0x51
 267
 268 #define CONFIG_SYS_SDRAM_SIZE   4096    /* for fixed parameter use */
 269
 270 /*
 271  * IFC Definitions
 272  */
 273 #define CONFIG_SYS_FLASH_BASE   0xe8000000
 274 #define CONFIG_SYS_FLASH_BASE_PHYS      (0xf00000000ull | CONFIG_SYS_FLASH_BASE)
 275
 276 #define CONFIG_SYS_NOR_CSPR_EXT (0xf)
 277 #define CONFIG_SYS_NOR_CSPR     (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE) | \
 278                                 CSPR_PORT_SIZE_16 | \
 279                                 CSPR_MSEL_NOR | \
 280                                 CSPR_V)
 281 #define CONFIG_SYS_NOR_AMASK    IFC_AMASK(128*1024*1024)
 282
 283 /*
 284  * TDM Definition
 285  */
 286 #define T1040_TDM_QUIRK_CCSR_BASE       0xfe000000
 287
 288 /* NOR Flash Timing Params */
 289 #define CONFIG_SYS_NOR_CSOR     CSOR_NAND_TRHZ_80
 290 #define CONFIG_SYS_NOR_FTIM0    (FTIM0_NOR_TACSE(0x4) | \
 291                                 FTIM0_NOR_TEADC(0x5) | \
 292                                 FTIM0_NOR_TEAHC(0x5))
 293 #define CONFIG_SYS_NOR_FTIM1    (FTIM1_NOR_TACO(0x35) | \
 294                                 FTIM1_NOR_TRAD_NOR(0x1A) |\
 295                                 FTIM1_NOR_TSEQRAD_NOR(0x13))
 296 #define CONFIG_SYS_NOR_FTIM2    (FTIM2_NOR_TCS(0x4) | \
 297                                 FTIM2_NOR_TCH(0x4) | \
 298                                 FTIM2_NOR_TWPH(0x0E) | \
 299                                 FTIM2_NOR_TWP(0x1c))
 300 #define CONFIG_SYS_NOR_FTIM3    0x0
 301
 302 #define CONFIG_SYS_FLASH_QUIET_TEST
 303 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
 304
 305 #define CONFIG_SYS_MAX_FLASH_BANKS      2       /* number of banks */
 306 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device */
 307 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 308 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 309
 310 #define CONFIG_SYS_FLASH_EMPTY_INFO
 311 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS}
 312
 313 /* CPLD on IFC */
 314 #define CPLD_LBMAP_MASK                 0x3F
 315 #define CPLD_BANK_SEL_MASK              0x07
 316 #define CPLD_BANK_OVERRIDE              0x40
 317 #define CPLD_LBMAP_ALTBANK              0x44 /* BANK OR | BANK 4 */
 318 #define CPLD_LBMAP_DFLTBANK             0x40 /* BANK OR | BANK0 */
 319 #define CPLD_LBMAP_RESET                0xFF
 320 #define CPLD_LBMAP_SHIFT                0x03
 321
 322 #if defined(CONFIG_TARGET_T1042RDB_PI)
 323 #define CPLD_DIU_SEL_DFP                0x80
 324 #elif defined(CONFIG_TARGET_T1042D4RDB)
 325 #define CPLD_DIU_SEL_DFP                0xc0
 326 #endif
 327
 328 #if defined(CONFIG_TARGET_T1040D4RDB)
 329 #define CPLD_INT_MASK_ALL               0xFF
 330 #define CPLD_INT_MASK_THERM             0x80
 331 #define CPLD_INT_MASK_DVI_DFP           0x40
 332 #define CPLD_INT_MASK_QSGMII1           0x20
 333 #define CPLD_INT_MASK_QSGMII2           0x10
 334 #define CPLD_INT_MASK_SGMI1             0x08
 335 #define CPLD_INT_MASK_SGMI2             0x04
 336 #define CPLD_INT_MASK_TDMR1             0x02
 337 #define CPLD_INT_MASK_TDMR2             0x01
 338 #endif
 339
 340 #define CONFIG_SYS_CPLD_BASE    0xffdf0000
 341 #define CONFIG_SYS_CPLD_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_CPLD_BASE)
 342 #define CONFIG_SYS_CSPR2_EXT    (0xf)
 343 #define CONFIG_SYS_CSPR2        (CSPR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE_PHYS) \
 344                                 | CSPR_PORT_SIZE_8 \
 345                                 | CSPR_MSEL_GPCM \
 346                                 | CSPR_V)
 347 #define CONFIG_SYS_AMASK2       IFC_AMASK(64*1024)
 348 #define CONFIG_SYS_CSOR2        0x0
 349 /* CPLD Timing parameters for IFC CS2 */
 350 #define CONFIG_SYS_CS2_FTIM0            (FTIM0_GPCM_TACSE(0x0e) | \
 351                                         FTIM0_GPCM_TEADC(0x0e) | \
 352                                         FTIM0_GPCM_TEAHC(0x0e))
 353 #define CONFIG_SYS_CS2_FTIM1            (FTIM1_GPCM_TACO(0x0e) | \
 354                                         FTIM1_GPCM_TRAD(0x1f))
 355 #define CONFIG_SYS_CS2_FTIM2            (FTIM2_GPCM_TCS(0x0e) | \
 356                                         FTIM2_GPCM_TCH(0x8) | \
 357                                         FTIM2_GPCM_TWP(0x1f))
 358 #define CONFIG_SYS_CS2_FTIM3            0x0
 359
 360 /* NAND Flash on IFC */
 361 #define CONFIG_NAND_FSL_IFC
 362 #define CONFIG_SYS_NAND_BASE            0xff800000
 363 #define CONFIG_SYS_NAND_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_NAND_BASE)
 364
 365 #define CONFIG_SYS_NAND_CSPR_EXT        (0xf)
 366 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 367                                 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
 368                                 | CSPR_MSEL_NAND        /* MSEL = NAND */ \
 369                                 | CSPR_V)
 370 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64*1024)
 371
 372 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 373                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 374                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
 375                                 | CSOR_NAND_RAL_3       /* RAL = 3Byes */ \
 376                                 | CSOR_NAND_PGS_4K      /* Page Size = 4K */ \
 377                                 | CSOR_NAND_SPRZ_224/* Spare size = 224 */ \
 378                                 | CSOR_NAND_PB(64))     /*Pages Per Block = 64*/
 379
 380 #define CONFIG_SYS_NAND_ONFI_DETECTION
 381
 382 /* ONFI NAND Flash mode0 Timing Params */
 383 #define CONFIG_SYS_NAND_FTIM0           (FTIM0_NAND_TCCST(0x07) | \
 384                                         FTIM0_NAND_TWP(0x18)   | \
 385                                         FTIM0_NAND_TWCHT(0x07) | \
 386                                         FTIM0_NAND_TWH(0x0a))
 387 #define CONFIG_SYS_NAND_FTIM1           (FTIM1_NAND_TADLE(0x32) | \
 388                                         FTIM1_NAND_TWBE(0x39)  | \
 389                                         FTIM1_NAND_TRR(0x0e)   | \
 390                                         FTIM1_NAND_TRP(0x18))
 391 #define CONFIG_SYS_NAND_FTIM2           (FTIM2_NAND_TRAD(0x0f) | \
 392                                         FTIM2_NAND_TREH(0x0a) | \
 393                                         FTIM2_NAND_TWHRE(0x1e))
 394 #define CONFIG_SYS_NAND_FTIM3           0x0
 395
 396 #define CONFIG_SYS_NAND_DDR_LAW         11
 397 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
 398 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 399
 400 #define CONFIG_SYS_NAND_BLOCK_SIZE      (512 * 1024)
 401
 402 #if defined(CONFIG_NAND)
 403 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NAND_CSPR_EXT
 404 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
 405 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
 406 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
 407 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
 408 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
 409 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
 410 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
 411 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR_CSPR_EXT
 412 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR_CSPR
 413 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
 414 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 415 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 416 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 417 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 418 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 419 #else
 420 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR_CSPR_EXT
 421 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR_CSPR
 422 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 423 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 424 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 425 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 426 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 427 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 428 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NAND_CSPR_EXT
 429 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NAND_CSPR
 430 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NAND_AMASK
 431 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NAND_CSOR
 432 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NAND_FTIM0
 433 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NAND_FTIM1
 434 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NAND_FTIM2
 435 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NAND_FTIM3
 436 #endif
 437
 438 #ifdef CONFIG_SPL_BUILD
 439 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
 440 #else
 441 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
 442 #endif
 443
 444 #if defined(CONFIG_RAMBOOT_PBL)
 445 #define CONFIG_SYS_RAMBOOT
 446 #endif
 447
 448 #ifdef CONFIG_SYS_FSL_ERRATUM_A008044
 449 #if defined(CONFIG_NAND)
 450 #define CONFIG_A008044_WORKAROUND
 451 #endif
 452 #endif
 453
 454 #define CONFIG_BOARD_EARLY_INIT_R
 455 #define CONFIG_MISC_INIT_R
 456
 457 #define CONFIG_HWCONFIG
 458
 459 /* define to use L1 as initial stack */
 460 #define CONFIG_L1_INIT_RAM
 461 #define CONFIG_SYS_INIT_RAM_LOCK
 462 #define CONFIG_SYS_INIT_RAM_ADDR        0xfdd00000      /* Initial L1 address */
 463 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH      0xf
 464 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW       0xfe03c000
 465 /* The assembler doesn't like typecast */
 466 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
 467         ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
 468           CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
 469 #define CONFIG_SYS_INIT_RAM_SIZE                0x00004000
 470
 471 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - \
 472                                         GENERATED_GBL_DATA_SIZE)
 473 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 474
 475 #define CONFIG_SYS_MONITOR_LEN          (768 * 1024)
 476 #define CONFIG_SYS_MALLOC_LEN           (4 * 1024 * 1024)
 477
 478 /* Serial Port - controlled on board with jumper J8
 479  * open - index 2
 480  * shorted - index 1
 481  */
 482 #define CONFIG_CONS_INDEX       1
 483 #define CONFIG_SYS_NS16550_SERIAL
 484 #define CONFIG_SYS_NS16550_REG_SIZE     1
 485 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
 486
 487 #define CONFIG_SYS_BAUDRATE_TABLE       \
 488         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 489
 490 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
 491 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
 492 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
 493 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
 494
 495 #if defined(CONFIG_TARGET_T1042RDB_PI) || defined(CONFIG_TARGET_T1042D4RDB)
 496 /* Video */
 497 #define CONFIG_FSL_DIU_FB
 498
 499 #ifdef CONFIG_FSL_DIU_FB
 500 #define CONFIG_FSL_DIU_CH7301
 501 #define CONFIG_SYS_DIU_ADDR     (CONFIG_SYS_CCSRBAR + 0x180000)
 502 #define CONFIG_VIDEO_LOGO
 503 #define CONFIG_VIDEO_BMP_LOGO
 504 #endif
 505 #endif
 506
 507 /* I2C */
 508 #define CONFIG_SYS_I2C
 509 #define CONFIG_SYS_I2C_FSL              /* Use FSL common I2C driver */
 510 #define CONFIG_SYS_FSL_I2C_SPEED        400000  /* I2C speed in Hz */
 511 #define CONFIG_SYS_FSL_I2C2_SPEED       400000
 512 #define CONFIG_SYS_FSL_I2C3_SPEED       400000
 513 #define CONFIG_SYS_FSL_I2C4_SPEED       400000
 514 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 515 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
 516 #define CONFIG_SYS_FSL_I2C3_SLAVE       0x7F
 517 #define CONFIG_SYS_FSL_I2C4_SLAVE       0x7F
 518 #define CONFIG_SYS_FSL_I2C_OFFSET       0x118000
 519 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x118100
 520 #define CONFIG_SYS_FSL_I2C3_OFFSET      0x119000
 521 #define CONFIG_SYS_FSL_I2C4_OFFSET      0x119100
 522
 523 /* I2C bus multiplexer */
 524 #define I2C_MUX_PCA_ADDR                0x70
 525 #define I2C_MUX_CH_DEFAULT      0x8
 526
 527 #if defined(CONFIG_TARGET_T1042RDB_PI)  || \
 528         defined(CONFIG_TARGET_T1040D4RDB)       || \
 529         defined(CONFIG_TARGET_T1042D4RDB)
 530 /* LDI/DVI Encoder for display */
 531 #define CONFIG_SYS_I2C_LDI_ADDR         0x38
 532 #define CONFIG_SYS_I2C_DVI_ADDR         0x75
 533
 534 /*
 535  * RTC configuration
 536  */
 537 #define RTC
 538 #define CONFIG_RTC_DS1337               1
 539 #define CONFIG_SYS_I2C_RTC_ADDR         0x68
 540
 541 /*DVI encoder*/
 542 #define CONFIG_HDMI_ENCODER_I2C_ADDR  0x75
 543 #endif
 544
 545 /*
 546  * eSPI - Enhanced SPI
 547  */
 548 #define CONFIG_SPI_FLASH_BAR
 549 #define CONFIG_SF_DEFAULT_SPEED         10000000
 550 #define CONFIG_SF_DEFAULT_MODE          0
 551 #define CONFIG_ENV_SPI_BUS              0
 552 #define CONFIG_ENV_SPI_CS               0
 553 #define CONFIG_ENV_SPI_MAX_HZ           10000000
 554 #define CONFIG_ENV_SPI_MODE             0
 555
 556 /*
 557  * General PCI
 558  * Memory space is mapped 1-1, but I/O space must start from 0.
 559  */
 560
 561 #ifdef CONFIG_PCI
 562 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
 563 #ifdef CONFIG_PCIE1
 564 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
 565 #define CONFIG_SYS_PCIE1_MEM_BUS        0xe0000000
 566 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
 567 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x10000000      /* 256M */
 568 #define CONFIG_SYS_PCIE1_IO_VIRT        0xf8000000
 569 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 570 #define CONFIG_SYS_PCIE1_IO_PHYS        0xff8000000ull
 571 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 572 #endif
 573
 574 /* controller 2, Slot 2, tgtid 2, Base address 201000 */
 575 #ifdef CONFIG_PCIE2
 576 #define CONFIG_SYS_PCIE2_MEM_VIRT       0x90000000
 577 #define CONFIG_SYS_PCIE2_MEM_BUS        0xe0000000
 578 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc10000000ull
 579 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x10000000      /* 256M */
 580 #define CONFIG_SYS_PCIE2_IO_VIRT        0xf8010000
 581 #define CONFIG_SYS_PCIE2_IO_BUS         0x00000000
 582 #define CONFIG_SYS_PCIE2_IO_PHYS        0xff8010000ull
 583 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00010000      /* 64k */
 584 #endif
 585
 586 /* controller 3, Slot 1, tgtid 1, Base address 202000 */
 587 #ifdef CONFIG_PCIE3
 588 #define CONFIG_SYS_PCIE3_MEM_VIRT       0xa0000000
 589 #define CONFIG_SYS_PCIE3_MEM_BUS        0xe0000000
 590 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc20000000ull
 591 #define CONFIG_SYS_PCIE3_MEM_SIZE       0x10000000      /* 256M */
 592 #define CONFIG_SYS_PCIE3_IO_VIRT        0xf8020000
 593 #define CONFIG_SYS_PCIE3_IO_BUS         0x00000000
 594 #define CONFIG_SYS_PCIE3_IO_PHYS        0xff8020000ull
 595 #define CONFIG_SYS_PCIE3_IO_SIZE        0x00010000      /* 64k */
 596 #endif
 597
 598 /* controller 4, Base address 203000 */
 599 #ifdef CONFIG_PCIE4
 600 #define CONFIG_SYS_PCIE4_MEM_VIRT       0xb0000000
 601 #define CONFIG_SYS_PCIE4_MEM_BUS        0xe0000000
 602 #define CONFIG_SYS_PCIE4_MEM_PHYS       0xc30000000ull
 603 #define CONFIG_SYS_PCIE4_MEM_SIZE       0x10000000      /* 256M */
 604 #define CONFIG_SYS_PCIE4_IO_VIRT        0xf8030000
 605 #define CONFIG_SYS_PCIE4_IO_BUS         0x00000000
 606 #define CONFIG_SYS_PCIE4_IO_PHYS        0xff8030000ull
 607 #define CONFIG_SYS_PCIE4_IO_SIZE        0x00010000      /* 64k */
 608 #endif
 609
 610 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 611 #endif  /* CONFIG_PCI */
 612
 613 /* SATA */
 614 #define CONFIG_FSL_SATA_V2
 615 #ifdef CONFIG_FSL_SATA_V2
 616 #define CONFIG_SYS_SATA_MAX_DEVICE      1
 617 #define CONFIG_SATA1
 618 #define CONFIG_SYS_SATA1                CONFIG_SYS_MPC85xx_SATA1_ADDR
 619 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
 620
 621 #define CONFIG_LBA48
 622 #endif
 623
 624 /*
 625 * USB
 626 */
 627 #define CONFIG_HAS_FSL_DR_USB
 628
 629 #ifdef CONFIG_HAS_FSL_DR_USB
 630 #ifdef CONFIG_USB_EHCI_HCD
 631 #define CONFIG_USB_EHCI_FSL
 632 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 633 #define CONFIG_EHCI_DESC_BIG_ENDIAN
 634 #endif
 635 #endif
 636
 637 #ifdef CONFIG_MMC
 638 #define CONFIG_FSL_ESDHC
 639 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 640 #endif
 641
 642 /* Qman/Bman */
 643 #ifndef CONFIG_NOBQFMAN
 644 #define CONFIG_SYS_BMAN_NUM_PORTALS     10
 645 #define CONFIG_SYS_BMAN_MEM_BASE        0xf4000000
 646 #define CONFIG_SYS_BMAN_MEM_PHYS        0xff4000000ull
 647 #define CONFIG_SYS_BMAN_MEM_SIZE        0x02000000
 648 #define CONFIG_SYS_BMAN_SP_CENA_SIZE    0x4000
 649 #define CONFIG_SYS_BMAN_SP_CINH_SIZE    0x1000
 650 #define CONFIG_SYS_BMAN_CENA_BASE       CONFIG_SYS_BMAN_MEM_BASE
 651 #define CONFIG_SYS_BMAN_CENA_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 652 #define CONFIG_SYS_BMAN_CINH_BASE       (CONFIG_SYS_BMAN_MEM_BASE + \
 653                                         CONFIG_SYS_BMAN_CENA_SIZE)
 654 #define CONFIG_SYS_BMAN_CINH_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 655 #define CONFIG_SYS_BMAN_SWP_ISDR_REG    0xE08
 656 #define CONFIG_SYS_QMAN_NUM_PORTALS     10
 657 #define CONFIG_SYS_QMAN_MEM_BASE        0xf6000000
 658 #define CONFIG_SYS_QMAN_MEM_PHYS        0xff6000000ull
 659 #define CONFIG_SYS_QMAN_MEM_SIZE        0x02000000
 660 #define CONFIG_SYS_QMAN_SP_CENA_SIZE    0x4000
 661 #define CONFIG_SYS_QMAN_SP_CINH_SIZE    0x1000
 662 #define CONFIG_SYS_QMAN_CENA_BASE       CONFIG_SYS_QMAN_MEM_BASE
 663 #define CONFIG_SYS_QMAN_CENA_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 664 #define CONFIG_SYS_QMAN_CINH_BASE       (CONFIG_SYS_QMAN_MEM_BASE + \
 665                                         CONFIG_SYS_QMAN_CENA_SIZE)
 666 #define CONFIG_SYS_QMAN_CINH_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 667 #define CONFIG_SYS_QMAN_SWP_ISDR_REG    0xE08
 668
 669 #define CONFIG_SYS_DPAA_FMAN
 670 #define CONFIG_SYS_DPAA_PME
 671
 672 #define CONFIG_QE
 673 #define CONFIG_U_QE
 674
 675 /* Default address of microcode for the Linux Fman driver */
 676 #if defined(CONFIG_SPIFLASH)
 677 /*
 678  * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
 679  * env, so we got 0x110000.
 680  */
 681 #define CONFIG_SYS_QE_FW_IN_SPIFLASH
 682 #define CONFIG_SYS_FMAN_FW_ADDR 0x110000
 683 #elif defined(CONFIG_SDCARD)
 684 /*
 685  * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
 686  * about 1MB (2048 blocks), Env is stored after the image, and the env size is
 687  * 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 2080.
 688  */
 689 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC
 690 #define CONFIG_SYS_FMAN_FW_ADDR (512 * 0x820)
 691 #elif defined(CONFIG_NAND)
 692 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND
 693 #define CONFIG_SYS_FMAN_FW_ADDR (5 * CONFIG_SYS_NAND_BLOCK_SIZE)
 694 #else
 695 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
 696 #define CONFIG_SYS_FMAN_FW_ADDR         0xEFF00000
 697 #endif
 698
 699 #if defined(CONFIG_SPIFLASH)
 700 #define CONFIG_SYS_QE_FW_ADDR           0x130000
 701 #elif defined(CONFIG_SDCARD)
 702 #define CONFIG_SYS_QE_FW_ADDR           (512 * 0x920)
 703 #elif defined(CONFIG_NAND)
 704 #define CONFIG_SYS_QE_FW_ADDR           (7 * CONFIG_SYS_NAND_BLOCK_SIZE)
 705 #else
 706 #define CONFIG_SYS_QE_FW_ADDR           0xEFF10000
 707 #endif
 708
 709 #define CONFIG_SYS_QE_FMAN_FW_LENGTH    0x10000
 710 #define CONFIG_SYS_FDT_PAD              (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 711 #endif /* CONFIG_NOBQFMAN */
 712
 713 #ifdef CONFIG_SYS_DPAA_FMAN
 714 #define CONFIG_FMAN_ENET
 715 #define CONFIG_PHY_VITESSE
 716 #define CONFIG_PHY_REALTEK
 717 #endif
 718
 719 #ifdef CONFIG_FMAN_ENET
 720 #if defined(CONFIG_TARGET_T1040RDB) || defined(CONFIG_TARGET_T1042RDB)
 721 #define CONFIG_SYS_SGMII1_PHY_ADDR             0x03
 722 #elif defined(CONFIG_TARGET_T1040D4RDB)
 723 #define CONFIG_SYS_SGMII1_PHY_ADDR             0x01
 724 #elif defined(CONFIG_TARGET_T1042D4RDB)
 725 #define CONFIG_SYS_SGMII1_PHY_ADDR             0x02
 726 #define CONFIG_SYS_SGMII2_PHY_ADDR             0x03
 727 #define CONFIG_SYS_SGMII3_PHY_ADDR             0x01
 728 #endif
 729
 730 #if defined(CONFIG_TARGET_T1040D4RDB) || defined(CONFIG_TARGET_T1042D4RDB)
 731 #define CONFIG_SYS_RGMII1_PHY_ADDR             0x04
 732 #define CONFIG_SYS_RGMII2_PHY_ADDR             0x05
 733 #else
 734 #define CONFIG_SYS_RGMII1_PHY_ADDR             0x01
 735 #define CONFIG_SYS_RGMII2_PHY_ADDR             0x02
 736 #endif
 737
 738 /* Enable VSC9953 L2 Switch driver on T1040 SoC */
 739 #if defined(CONFIG_TARGET_T1040RDB) || defined(CONFIG_TARGET_T1040D4RDB)
 740 #define CONFIG_VSC9953
 741 #ifdef CONFIG_TARGET_T1040RDB
 742 #define CONFIG_SYS_FM1_QSGMII11_PHY_ADDR        0x04
 743 #define CONFIG_SYS_FM1_QSGMII21_PHY_ADDR        0x08
 744 #else
 745 #define CONFIG_SYS_FM1_QSGMII11_PHY_ADDR        0x08
 746 #define CONFIG_SYS_FM1_QSGMII21_PHY_ADDR        0x0c
 747 #endif
 748 #endif
 749
 750 #define CONFIG_MII              /* MII PHY management */
 751 #define CONFIG_ETHPRIME         "FM1@DTSEC4"
 752 #endif
 753
 754 /*
 755  * Environment
 756  */
 757 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
 758 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 759
 760 /*
 761  * Miscellaneous configurable options
 762  */
 763 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 764 #define CONFIG_CMDLINE_EDITING                  /* Command-line editing */
 765 #define CONFIG_AUTO_COMPLETE                    /* add autocompletion support */
 766 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 767
 768 /*
 769  * For booting Linux, the board info and command line data
 770  * have to be in the first 64 MB of memory, since this is
 771  * the maximum mapped by the Linux kernel during initialization.
 772  */
 773 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial map for Linux*/
 774 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 775
 776 #ifdef CONFIG_CMD_KGDB
 777 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 778 #endif
 779
 780 /*
 781  * Dynamic MTD Partition support with mtdparts
 782  */
 783 #ifdef CONFIG_MTD_NOR_FLASH
 784 #define CONFIG_MTD_DEVICE
 785 #define CONFIG_MTD_PARTITIONS
 786 #define CONFIG_FLASH_CFI_MTD
 787 #endif
 788
 789 /*
 790  * Environment Configuration
 791  */
 792 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 793 #define CONFIG_BOOTFILE         "uImage"
 794 #define CONFIG_UBOOTPATH        "u-boot.bin"    /* U-Boot image on TFTP server*/
 795
 796 /* default location for tftp and bootm */
 797 #define CONFIG_LOADADDR         1000000
 798
 799 #define __USB_PHY_TYPE  utmi
 800 #define RAMDISKFILE     "t104xrdb/ramdisk.uboot"
 801
 802 #ifdef CONFIG_TARGET_T1040RDB
 803 #define FDTFILE         "t1040rdb/t1040rdb.dtb"
 804 #elif defined(CONFIG_TARGET_T1042RDB_PI)
 805 #define FDTFILE         "t1042rdb_pi/t1042rdb_pi.dtb"
 806 #elif defined(CONFIG_TARGET_T1042RDB)
 807 #define FDTFILE         "t1042rdb/t1042rdb.dtb"
 808 #elif defined(CONFIG_TARGET_T1040D4RDB)
 809 #define FDTFILE         "t1042rdb/t1040d4rdb.dtb"
 810 #elif defined(CONFIG_TARGET_T1042D4RDB)
 811 #define FDTFILE         "t1042rdb/t1042d4rdb.dtb"
 812 #endif
 813
 814 #ifdef CONFIG_FSL_DIU_FB
 815 #define DIU_ENVIRONMENT "video-mode=fslfb:1024x768-32@60,monitor=dvi"
 816 #else
 817 #define DIU_ENVIRONMENT
 818 #endif
 819
 820 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 821         "hwconfig=fsl_ddr:bank_intlv=cs0_cs1;"                  \
 822         "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) ";"\
 823         "usb2:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
 824         "netdev=eth0\0"                                         \
 825         "video-mode=" __stringify(DIU_ENVIRONMENT) "\0"         \
 826         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"             \
 827         "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"     \
 828         "tftpflash=tftpboot $loadaddr $uboot && "               \
 829         "protect off $ubootaddr +$filesize && "                 \
 830         "erase $ubootaddr +$filesize && "                       \
 831         "cp.b $loadaddr $ubootaddr $filesize && "               \
 832         "protect on $ubootaddr +$filesize && "                  \
 833         "cmp.b $loadaddr $ubootaddr $filesize\0"                \
 834         "consoledev=ttyS0\0"                                    \
 835         "ramdiskaddr=2000000\0"                                 \
 836         "ramdiskfile=" __stringify(RAMDISKFILE) "\0"            \
 837         "fdtaddr=1e00000\0"                                     \
 838         "fdtfile=" __stringify(FDTFILE) "\0"                    \
 839         "bdev=sda3\0"
 840
 841 #define CONFIG_LINUX                       \
 842         "setenv bootargs root=/dev/ram rw "            \
 843         "console=$consoledev,$baudrate $othbootargs;"  \
 844         "setenv ramdiskaddr 0x02000000;"               \
 845         "setenv fdtaddr 0x00c00000;"                   \
 846         "setenv loadaddr 0x1000000;"                   \
 847         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 848
 849 #define CONFIG_HDBOOT                                   \
 850         "setenv bootargs root=/dev/$bdev rw "           \
 851         "console=$consoledev,$baudrate $othbootargs;"   \
 852         "tftp $loadaddr $bootfile;"                     \
 853         "tftp $fdtaddr $fdtfile;"                       \
 854         "bootm $loadaddr - $fdtaddr"
 855
 856 #define CONFIG_NFSBOOTCOMMAND                   \
 857         "setenv bootargs root=/dev/nfs rw "     \
 858         "nfsroot=$serverip:$rootpath "          \
 859         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 860         "console=$consoledev,$baudrate $othbootargs;"   \
 861         "tftp $loadaddr $bootfile;"             \
 862         "tftp $fdtaddr $fdtfile;"               \
 863         "bootm $loadaddr - $fdtaddr"
 864
 865 #define CONFIG_RAMBOOTCOMMAND                           \
 866         "setenv bootargs root=/dev/ram rw "             \
 867         "console=$consoledev,$baudrate $othbootargs;"   \
 868         "tftp $ramdiskaddr $ramdiskfile;"               \
 869         "tftp $loadaddr $bootfile;"                     \
 870         "tftp $fdtaddr $fdtfile;"                       \
 871         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 872
 873 #define CONFIG_BOOTCOMMAND              CONFIG_LINUX
 874
 875 #include <asm/fsl_secure_boot.h>
 876
 877 #endif  /* __CONFIG_H */