include/configs/T1040QDS.h

   1 /*
   2  * Copyright 2013-2014 Freescale Semiconductor, Inc.
   3  *
   4  * See file CREDITS for list of people who contributed to this
   5  * project.
   6  *
   7  * This program is free software; you can redistribute it and/or
   8  * modify it under the terms of the GNU General Public License as
   9  * published by the Free Software Foundation; either version 2 of
  10  * the License, or (at your option) any later version.
  11  *
  12  * This program is distributed in the hope that it will be useful,
  13  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  15  * GNU General Public License for more details.
  16  *
  17  * You should have received a copy of the GNU General Public License
  18  * along with this program; if not, write to the Free Software
  19  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  20  * MA 02111-1307 USA
  21  */
  22
  23 #ifndef __CONFIG_H
  24 #define __CONFIG_H
  25
  26 /*
  27  * T1040 QDS board configuration file
  28  */
  29
  30 #ifdef CONFIG_RAMBOOT_PBL
  31 #define CONFIG_RAMBOOT_TEXT_BASE        CONFIG_SYS_TEXT_BASE
  32 #define CONFIG_RESET_VECTOR_ADDRESS     0xfffffffc
  33 #define CONFIG_SYS_FSL_PBL_PBI board/freescale/t1040qds/t1040_pbi.cfg
  34 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t1040qds/t1040_rcw.cfg
  35 #endif
  36
  37 /* High Level Configuration Options */
  38 #define CONFIG_SYS_BOOK3E_HV            /* Category E.HV supported */
  39 #define CONFIG_MP                       /* support multiple processors */
  40
  41 /* support deep sleep */
  42 #define CONFIG_DEEP_SLEEP
  43
  44 #ifndef CONFIG_SYS_TEXT_BASE
  45 #define CONFIG_SYS_TEXT_BASE    0xeff40000
  46 #endif
  47
  48 #ifndef CONFIG_RESET_VECTOR_ADDRESS
  49 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
  50 #endif
  51
  52 #define CONFIG_SYS_FSL_CPC              /* Corenet Platform Cache */
  53 #define CONFIG_SYS_NUM_CPC              CONFIG_SYS_NUM_DDR_CTLRS
  54 #define CONFIG_PCI_INDIRECT_BRIDGE
  55 #define CONFIG_PCIE1                    /* PCIE controller 1 */
  56 #define CONFIG_PCIE2                    /* PCIE controller 2 */
  57 #define CONFIG_PCIE3                    /* PCIE controller 3 */
  58 #define CONFIG_PCIE4                    /* PCIE controller 4 */
  59
  60 #define CONFIG_FSL_PCI_INIT             /* Use common FSL init code */
  61 #define CONFIG_SYS_PCI_64BIT            /* enable 64-bit PCI resources */
  62
  63 #define CONFIG_ENV_OVERWRITE
  64
  65 #ifndef CONFIG_MTD_NOR_FLASH
  66 #else
  67 #define CONFIG_FLASH_CFI_DRIVER
  68 #define CONFIG_SYS_FLASH_CFI
  69 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
  70 #endif
  71
  72 #ifdef CONFIG_MTD_NOR_FLASH
  73 #if defined(CONFIG_SPIFLASH)
  74 #define CONFIG_SYS_EXTRA_ENV_RELOC
  75 #define CONFIG_ENV_SPI_BUS              0
  76 #define CONFIG_ENV_SPI_CS               0
  77 #define CONFIG_ENV_SPI_MAX_HZ           10000000
  78 #define CONFIG_ENV_SPI_MODE             0
  79 #define CONFIG_ENV_SIZE                 0x2000          /* 8KB */
  80 #define CONFIG_ENV_OFFSET               0x100000        /* 1MB */
  81 #define CONFIG_ENV_SECT_SIZE            0x10000
  82 #elif defined(CONFIG_SDCARD)
  83 #define CONFIG_SYS_EXTRA_ENV_RELOC
  84 #define CONFIG_SYS_MMC_ENV_DEV          0
  85 #define CONFIG_ENV_SIZE                 0x2000
  86 #define CONFIG_ENV_OFFSET               (512 * 1658)
  87 #elif defined(CONFIG_NAND)
  88 #define CONFIG_SYS_EXTRA_ENV_RELOC
  89 #define CONFIG_ENV_SIZE                 CONFIG_SYS_NAND_BLOCK_SIZE
  90 #define CONFIG_ENV_OFFSET               (7 * CONFIG_SYS_NAND_BLOCK_SIZE)
  91 #else
  92 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
  93 #define CONFIG_ENV_SIZE         0x2000
  94 #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
  95 #endif
  96 #else /* CONFIG_MTD_NOR_FLASH */
  97 #define CONFIG_ENV_SIZE                0x2000
  98 #define CONFIG_ENV_SECT_SIZE   0x20000 /* 128K (one sector) */
  99 #endif
 100
 101 #ifndef __ASSEMBLY__
 102 unsigned long get_board_sys_clk(void);
 103 unsigned long get_board_ddr_clk(void);
 104 #endif
 105
 106 #define CONFIG_SYS_CLK_FREQ     get_board_sys_clk() /* sysclk for MPC85xx */
 107 #define CONFIG_DDR_CLK_FREQ     get_board_ddr_clk()
 108
 109 /*
 110  * These can be toggled for performance analysis, otherwise use default.
 111  */
 112 #define CONFIG_SYS_CACHE_STASHING
 113 #define CONFIG_BACKSIDE_L2_CACHE
 114 #define CONFIG_SYS_INIT_L2CSR0          L2CSR0_L2E
 115 #define CONFIG_BTB                      /* toggle branch predition */
 116 #define CONFIG_DDR_ECC
 117 #ifdef CONFIG_DDR_ECC
 118 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
 119 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
 120 #endif
 121
 122 #define CONFIG_ENABLE_36BIT_PHYS
 123
 124 #define CONFIG_ADDR_MAP
 125 #define CONFIG_SYS_NUM_ADDR_MAP         64      /* number of TLB1 entries */
 126
 127 #define CONFIG_SYS_MEMTEST_START        0x00200000      /* memtest works on */
 128 #define CONFIG_SYS_MEMTEST_END          0x00400000
 129 #define CONFIG_SYS_ALT_MEMTEST
 130 #define CONFIG_PANIC_HANG       /* do not reset board on panic */
 131
 132 /*
 133  *  Config the L3 Cache as L3 SRAM
 134  */
 135 #define CONFIG_SYS_INIT_L3_ADDR         0xFFFC0000
 136
 137 #define CONFIG_SYS_DCSRBAR              0xf0000000
 138 #define CONFIG_SYS_DCSRBAR_PHYS         0xf00000000ull
 139
 140 /* EEPROM */
 141 #define CONFIG_ID_EEPROM
 142 #define CONFIG_SYS_I2C_EEPROM_NXID
 143 #define CONFIG_SYS_EEPROM_BUS_NUM       0
 144 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x57
 145 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  1
 146 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
 147 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
 148
 149 /*
 150  * DDR Setup
 151  */
 152 #define CONFIG_VERY_BIG_RAM
 153 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 154 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 155
 156 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 157 #define CONFIG_CHIP_SELECTS_PER_CTRL    (2 * CONFIG_DIMM_SLOTS_PER_CTLR)
 158
 159 #define CONFIG_DDR_SPD
 160 #define CONFIG_FSL_DDR_INTERACTIVE
 161
 162 #define CONFIG_SYS_SPD_BUS_NUM  0
 163 #define SPD_EEPROM_ADDRESS      0x51
 164
 165 #define CONFIG_SYS_SDRAM_SIZE   4096    /* for fixed parameter use */
 166
 167 /*
 168  * IFC Definitions
 169  */
 170 #define CONFIG_SYS_FLASH_BASE   0xe0000000
 171 #define CONFIG_SYS_FLASH_BASE_PHYS      (0xf00000000ull | CONFIG_SYS_FLASH_BASE)
 172
 173 #define CONFIG_SYS_NOR0_CSPR_EXT        (0xf)
 174 #define CONFIG_SYS_NOR0_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \
 175                                 + 0x8000000) | \
 176                                 CSPR_PORT_SIZE_16 | \
 177                                 CSPR_MSEL_NOR | \
 178                                 CSPR_V)
 179 #define CONFIG_SYS_NOR1_CSPR_EXT        (0xf)
 180 #define CONFIG_SYS_NOR1_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
 181                                 CSPR_PORT_SIZE_16 | \
 182                                 CSPR_MSEL_NOR | \
 183                                 CSPR_V)
 184 #define CONFIG_SYS_NOR_AMASK    IFC_AMASK(128*1024*1024)
 185
 186 /*
 187  * TDM Definition
 188  */
 189 #define T1040_TDM_QUIRK_CCSR_BASE       0xfe000000
 190
 191 /* NOR Flash Timing Params */
 192 #define CONFIG_SYS_NOR_CSOR     CSOR_NAND_TRHZ_80
 193 #define CONFIG_SYS_NOR_FTIM0    (FTIM0_NOR_TACSE(0x4) | \
 194                                 FTIM0_NOR_TEADC(0x5) | \
 195                                 FTIM0_NOR_TEAHC(0x5))
 196 #define CONFIG_SYS_NOR_FTIM1    (FTIM1_NOR_TACO(0x35) | \
 197                                 FTIM1_NOR_TRAD_NOR(0x1A) |\
 198                                 FTIM1_NOR_TSEQRAD_NOR(0x13))
 199 #define CONFIG_SYS_NOR_FTIM2    (FTIM2_NOR_TCS(0x4) | \
 200                                 FTIM2_NOR_TCH(0x4) | \
 201                                 FTIM2_NOR_TWPH(0x0E) | \
 202                                 FTIM2_NOR_TWP(0x1c))
 203 #define CONFIG_SYS_NOR_FTIM3    0x0
 204
 205 #define CONFIG_SYS_FLASH_QUIET_TEST
 206 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
 207
 208 #define CONFIG_SYS_MAX_FLASH_BANKS      2       /* number of banks */
 209 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device */
 210 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 211 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 212
 213 #define CONFIG_SYS_FLASH_EMPTY_INFO
 214 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS \
 215                                         + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS}
 216 #define CONFIG_FSL_QIXIS        /* use common QIXIS code */
 217 #define QIXIS_BASE              0xffdf0000
 218 #define QIXIS_BASE_PHYS         (0xf00000000ull | QIXIS_BASE)
 219 #define QIXIS_LBMAP_SWITCH              0x06
 220 #define QIXIS_LBMAP_MASK                0x0f
 221 #define QIXIS_LBMAP_SHIFT               0
 222 #define QIXIS_LBMAP_DFLTBANK            0x00
 223 #define QIXIS_LBMAP_ALTBANK             0x04
 224 #define QIXIS_RST_CTL_RESET             0x31
 225 #define QIXIS_RCFG_CTL_RECONFIG_IDLE    0x20
 226 #define QIXIS_RCFG_CTL_RECONFIG_START   0x21
 227 #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE   0x08
 228 #define QIXIS_RST_FORCE_MEM             0x01
 229
 230 #define CONFIG_SYS_CSPR3_EXT    (0xf)
 231 #define CONFIG_SYS_CSPR3        (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) \
 232                                 | CSPR_PORT_SIZE_8 \
 233                                 | CSPR_MSEL_GPCM \
 234                                 | CSPR_V)
 235 #define CONFIG_SYS_AMASK3       IFC_AMASK(4*1024)
 236 #define CONFIG_SYS_CSOR3        0x0
 237 /* QIXIS Timing parameters for IFC CS3 */
 238 #define CONFIG_SYS_CS3_FTIM0            (FTIM0_GPCM_TACSE(0x0e) | \
 239                                         FTIM0_GPCM_TEADC(0x0e) | \
 240                                         FTIM0_GPCM_TEAHC(0x0e))
 241 #define CONFIG_SYS_CS3_FTIM1            (FTIM1_GPCM_TACO(0xff) | \
 242                                         FTIM1_GPCM_TRAD(0x3f))
 243 #define CONFIG_SYS_CS3_FTIM2            (FTIM2_GPCM_TCS(0x0e) | \
 244                                         FTIM2_GPCM_TCH(0x8) | \
 245                                         FTIM2_GPCM_TWP(0x1f))
 246 #define CONFIG_SYS_CS3_FTIM3            0x0
 247
 248 #define CONFIG_NAND_FSL_IFC
 249 #define CONFIG_SYS_NAND_BASE            0xff800000
 250 #define CONFIG_SYS_NAND_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_NAND_BASE)
 251
 252 #define CONFIG_SYS_NAND_CSPR_EXT        (0xf)
 253 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 254                                 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
 255                                 | CSPR_MSEL_NAND        /* MSEL = NAND */ \
 256                                 | CSPR_V)
 257 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64*1024)
 258
 259 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 260                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 261                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
 262                                 | CSOR_NAND_RAL_3       /* RAL = 3Byes */ \
 263                                 | CSOR_NAND_PGS_2K      /* Page Size = 2K */ \
 264                                 | CSOR_NAND_SPRZ_64/* Spare size = 64 */ \
 265                                 | CSOR_NAND_PB(64))     /*Pages Per Block = 64*/
 266
 267 #define CONFIG_SYS_NAND_ONFI_DETECTION
 268
 269 /* ONFI NAND Flash mode0 Timing Params */
 270 #define CONFIG_SYS_NAND_FTIM0           (FTIM0_NAND_TCCST(0x07) | \
 271                                         FTIM0_NAND_TWP(0x18)   | \
 272                                         FTIM0_NAND_TWCHT(0x07) | \
 273                                         FTIM0_NAND_TWH(0x0a))
 274 #define CONFIG_SYS_NAND_FTIM1           (FTIM1_NAND_TADLE(0x32) | \
 275                                         FTIM1_NAND_TWBE(0x39)  | \
 276                                         FTIM1_NAND_TRR(0x0e)   | \
 277                                         FTIM1_NAND_TRP(0x18))
 278 #define CONFIG_SYS_NAND_FTIM2           (FTIM2_NAND_TRAD(0x0f) | \
 279                                         FTIM2_NAND_TREH(0x0a) | \
 280                                         FTIM2_NAND_TWHRE(0x1e))
 281 #define CONFIG_SYS_NAND_FTIM3           0x0
 282
 283 #define CONFIG_SYS_NAND_DDR_LAW         11
 284 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
 285 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 286 #define CONFIG_CMD_NAND
 287
 288 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128 * 1024)
 289
 290 #if defined(CONFIG_NAND)
 291 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NAND_CSPR_EXT
 292 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
 293 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
 294 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
 295 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
 296 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
 297 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
 298 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
 299 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 300 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR0_CSPR
 301 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
 302 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 303 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 304 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 305 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 306 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 307 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NOR1_CSPR_EXT
 308 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NOR1_CSPR
 309 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NOR_AMASK
 310 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NOR_CSOR
 311 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NOR_FTIM0
 312 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NOR_FTIM1
 313 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NOR_FTIM2
 314 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NOR_FTIM3
 315 #else
 316 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 317 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR0_CSPR
 318 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 319 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 320 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 321 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 322 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 323 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 324 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR1_CSPR_EXT
 325 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR1_CSPR
 326 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
 327 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 328 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 329 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 330 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 331 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 332 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NAND_CSPR_EXT
 333 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NAND_CSPR
 334 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NAND_AMASK
 335 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NAND_CSOR
 336 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NAND_FTIM0
 337 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NAND_FTIM1
 338 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NAND_FTIM2
 339 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NAND_FTIM3
 340 #endif
 341
 342 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_TEXT_BASE
 343
 344 #if defined(CONFIG_RAMBOOT_PBL)
 345 #define CONFIG_SYS_RAMBOOT
 346 #endif
 347
 348 #define CONFIG_BOARD_EARLY_INIT_R
 349 #define CONFIG_MISC_INIT_R
 350
 351 #define CONFIG_HWCONFIG
 352
 353 /* define to use L1 as initial stack */
 354 #define CONFIG_L1_INIT_RAM
 355 #define CONFIG_SYS_INIT_RAM_LOCK
 356 #define CONFIG_SYS_INIT_RAM_ADDR        0xfdd00000      /* Initial L1 address */
 357 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH      0xf
 358 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW       0xfe03c000
 359 /* The assembler doesn't like typecast */
 360 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
 361         ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
 362           CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
 363 #define CONFIG_SYS_INIT_RAM_SIZE                0x00004000
 364
 365 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - \
 366                                         GENERATED_GBL_DATA_SIZE)
 367 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 368
 369 #define CONFIG_SYS_MONITOR_LEN          (768 * 1024)
 370 #define CONFIG_SYS_MALLOC_LEN           (10 * 1024 * 1024)
 371
 372 /* Serial Port - controlled on board with jumper J8
 373  * open - index 2
 374  * shorted - index 1
 375  */
 376 #define CONFIG_CONS_INDEX       1
 377 #define CONFIG_SYS_NS16550_SERIAL
 378 #define CONFIG_SYS_NS16550_REG_SIZE     1
 379 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
 380
 381 #define CONFIG_SYS_BAUDRATE_TABLE       \
 382         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 383
 384 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
 385 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
 386 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
 387 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
 388
 389 /* Video */
 390 #define CONFIG_FSL_DIU_FB
 391 #ifdef CONFIG_FSL_DIU_FB
 392 #define CONFIG_FSL_DIU_CH7301
 393 #define CONFIG_SYS_DIU_ADDR     (CONFIG_SYS_CCSRBAR + 0x180000)
 394 #define CONFIG_VIDEO_LOGO
 395 #define CONFIG_VIDEO_BMP_LOGO
 396 #define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS
 397 /*
 398  * With CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS, flash I/O is really slow, so
 399  * disable empty flash sector detection, which is I/O-intensive.
 400  */
 401 #undef CONFIG_SYS_FLASH_EMPTY_INFO
 402 #endif
 403
 404 /* I2C */
 405 #define CONFIG_SYS_I2C
 406 #define CONFIG_SYS_I2C_FSL              /* Use FSL common I2C driver */
 407 #define CONFIG_SYS_FSL_I2C_SPEED        50000   /* I2C speed in Hz */
 408 #define CONFIG_SYS_FSL_I2C2_SPEED       50000
 409 #define CONFIG_SYS_FSL_I2C3_SPEED       50000
 410 #define CONFIG_SYS_FSL_I2C4_SPEED       50000
 411 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 412 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
 413 #define CONFIG_SYS_FSL_I2C3_SLAVE       0x7F
 414 #define CONFIG_SYS_FSL_I2C4_SLAVE       0x7F
 415 #define CONFIG_SYS_FSL_I2C_OFFSET       0x118000
 416 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x118100
 417 #define CONFIG_SYS_FSL_I2C3_OFFSET      0x119000
 418 #define CONFIG_SYS_FSL_I2C4_OFFSET      0x119100
 419
 420 #define I2C_MUX_PCA_ADDR                0x77
 421 #define I2C_MUX_PCA_ADDR_PRI            0x77 /* Primary Mux*/
 422
 423 /* I2C bus multiplexer */
 424 #define I2C_MUX_CH_DEFAULT      0x8
 425 #define I2C_MUX_CH_DIU          0xC
 426
 427 /* LDI/DVI Encoder for display */
 428 #define CONFIG_SYS_I2C_LDI_ADDR         0x38
 429 #define CONFIG_SYS_I2C_DVI_ADDR         0x75
 430
 431 /*
 432  * RTC configuration
 433  */
 434 #define RTC
 435 #define CONFIG_RTC_DS3231               1
 436 #define CONFIG_SYS_I2C_RTC_ADDR         0x68
 437
 438 /*
 439  * eSPI - Enhanced SPI
 440  */
 441 #define CONFIG_SF_DEFAULT_SPEED         10000000
 442 #define CONFIG_SF_DEFAULT_MODE          0
 443
 444 /*
 445  * General PCI
 446  * Memory space is mapped 1-1, but I/O space must start from 0.
 447  */
 448
 449 #ifdef CONFIG_PCI
 450 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
 451 #ifdef CONFIG_PCIE1
 452 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
 453 #define CONFIG_SYS_PCIE1_MEM_BUS        0xe0000000
 454 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
 455 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x10000000      /* 256M */
 456 #define CONFIG_SYS_PCIE1_IO_VIRT        0xf8000000
 457 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 458 #define CONFIG_SYS_PCIE1_IO_PHYS        0xff8000000ull
 459 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 460 #endif
 461
 462 /* controller 2, Slot 2, tgtid 2, Base address 201000 */
 463 #ifdef CONFIG_PCIE2
 464 #define CONFIG_SYS_PCIE2_MEM_VIRT       0x90000000
 465 #define CONFIG_SYS_PCIE2_MEM_BUS        0xe0000000
 466 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc10000000ull
 467 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x10000000      /* 256M */
 468 #define CONFIG_SYS_PCIE2_IO_VIRT        0xf8010000
 469 #define CONFIG_SYS_PCIE2_IO_BUS         0x00000000
 470 #define CONFIG_SYS_PCIE2_IO_PHYS        0xff8010000ull
 471 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00010000      /* 64k */
 472 #endif
 473
 474 /* controller 3, Slot 1, tgtid 1, Base address 202000 */
 475 #ifdef CONFIG_PCIE3
 476 #define CONFIG_SYS_PCIE3_MEM_VIRT       0xa0000000
 477 #define CONFIG_SYS_PCIE3_MEM_BUS        0xe0000000
 478 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc20000000ull
 479 #define CONFIG_SYS_PCIE3_MEM_SIZE       0x10000000      /* 256M */
 480 #define CONFIG_SYS_PCIE3_IO_VIRT        0xf8020000
 481 #define CONFIG_SYS_PCIE3_IO_BUS         0x00000000
 482 #define CONFIG_SYS_PCIE3_IO_PHYS        0xff8020000ull
 483 #define CONFIG_SYS_PCIE3_IO_SIZE        0x00010000      /* 64k */
 484 #endif
 485
 486 /* controller 4, Base address 203000 */
 487 #ifdef CONFIG_PCIE4
 488 #define CONFIG_SYS_PCIE4_MEM_VIRT       0xb0000000
 489 #define CONFIG_SYS_PCIE4_MEM_BUS        0xe0000000
 490 #define CONFIG_SYS_PCIE4_MEM_PHYS       0xc30000000ull
 491 #define CONFIG_SYS_PCIE4_MEM_SIZE       0x10000000      /* 256M */
 492 #define CONFIG_SYS_PCIE4_IO_VIRT        0xf8030000
 493 #define CONFIG_SYS_PCIE4_IO_BUS         0x00000000
 494 #define CONFIG_SYS_PCIE4_IO_PHYS        0xff8030000ull
 495 #define CONFIG_SYS_PCIE4_IO_SIZE        0x00010000      /* 64k */
 496 #endif
 497
 498 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 499 #endif  /* CONFIG_PCI */
 500
 501 /* SATA */
 502 #define CONFIG_FSL_SATA_V2
 503 #ifdef CONFIG_FSL_SATA_V2
 504 #define CONFIG_LIBATA
 505 #define CONFIG_FSL_SATA
 506
 507 #define CONFIG_SYS_SATA_MAX_DEVICE      2
 508 #define CONFIG_SATA1
 509 #define CONFIG_SYS_SATA1                CONFIG_SYS_MPC85xx_SATA1_ADDR
 510 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
 511 #define CONFIG_SATA2
 512 #define CONFIG_SYS_SATA2                CONFIG_SYS_MPC85xx_SATA2_ADDR
 513 #define CONFIG_SYS_SATA2_FLAGS          FLAGS_DMA
 514
 515 #define CONFIG_LBA48
 516 #endif
 517
 518 /*
 519 * USB
 520 */
 521 #define CONFIG_HAS_FSL_DR_USB
 522
 523 #ifdef CONFIG_HAS_FSL_DR_USB
 524 #ifdef CONFIG_USB_EHCI_HCD
 525 #define CONFIG_USB_EHCI_FSL
 526 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 527 #endif
 528 #endif
 529
 530 #ifdef CONFIG_MMC
 531 #define CONFIG_FSL_ESDHC
 532 #define CONFIG_FSL_ESDHC_USE_PERIPHERAL_CLK
 533 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 534 #define CONFIG_FSL_ESDHC_ADAPTER_IDENT
 535 #endif
 536
 537 /* Qman/Bman */
 538 #ifndef CONFIG_NOBQFMAN
 539 #define CONFIG_SYS_DPAA_QBMAN           /* Support Q/Bman */
 540 #define CONFIG_SYS_BMAN_NUM_PORTALS     10
 541 #define CONFIG_SYS_BMAN_MEM_BASE        0xf4000000
 542 #define CONFIG_SYS_BMAN_MEM_PHYS        0xff4000000ull
 543 #define CONFIG_SYS_BMAN_MEM_SIZE        0x02000000
 544 #define CONFIG_SYS_BMAN_SP_CENA_SIZE    0x4000
 545 #define CONFIG_SYS_BMAN_SP_CINH_SIZE    0x1000
 546 #define CONFIG_SYS_BMAN_CENA_BASE       CONFIG_SYS_BMAN_MEM_BASE
 547 #define CONFIG_SYS_BMAN_CENA_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 548 #define CONFIG_SYS_BMAN_CINH_BASE       (CONFIG_SYS_BMAN_MEM_BASE + \
 549                                         CONFIG_SYS_BMAN_CENA_SIZE)
 550 #define CONFIG_SYS_BMAN_CINH_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 551 #define CONFIG_SYS_BMAN_SWP_ISDR_REG    0xE08
 552 #define CONFIG_SYS_QMAN_NUM_PORTALS     10
 553 #define CONFIG_SYS_QMAN_MEM_BASE        0xf6000000
 554 #define CONFIG_SYS_QMAN_MEM_PHYS        0xff6000000ull
 555 #define CONFIG_SYS_QMAN_MEM_SIZE        0x02000000
 556 #define CONFIG_SYS_QMAN_SP_CENA_SIZE    0x4000
 557 #define CONFIG_SYS_QMAN_SP_CINH_SIZE    0x1000
 558 #define CONFIG_SYS_QMAN_CENA_BASE       CONFIG_SYS_QMAN_MEM_BASE
 559 #define CONFIG_SYS_QMAN_CENA_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 560 #define CONFIG_SYS_QMAN_CINH_BASE       (CONFIG_SYS_QMAN_MEM_BASE + \
 561                                         CONFIG_SYS_QMAN_CENA_SIZE)
 562 #define CONFIG_SYS_QMAN_CINH_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 563 #define CONFIG_SYS_QMAN_SWP_ISDR_REG    0xE08
 564
 565 #define CONFIG_SYS_DPAA_FMAN
 566 #define CONFIG_SYS_DPAA_PME
 567
 568 #define CONFIG_QE
 569 #define CONFIG_U_QE
 570 /* Default address of microcode for the Linux Fman driver */
 571 #if defined(CONFIG_SPIFLASH)
 572 /*
 573  * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
 574  * env, so we got 0x110000.
 575  */
 576 #define CONFIG_SYS_QE_FW_IN_SPIFLASH
 577 #define CONFIG_SYS_FMAN_FW_ADDR 0x110000
 578 #elif defined(CONFIG_SDCARD)
 579 /*
 580  * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
 581  * about 825KB (1650 blocks), Env is stored after the image, and the env size is
 582  * 0x2000 (16 blocks), 8 + 1650 + 16 = 1674, enlarge it to 1680.
 583  */
 584 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC
 585 #define CONFIG_SYS_FMAN_FW_ADDR (512 * 1680)
 586 #elif defined(CONFIG_NAND)
 587 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND
 588 #define CONFIG_SYS_FMAN_FW_ADDR (8 * CONFIG_SYS_NAND_BLOCK_SIZE)
 589 #else
 590 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
 591 #define CONFIG_SYS_FMAN_FW_ADDR         0xEFF00000
 592 #define CONFIG_SYS_QE_FW_ADDR           0xEFF10000
 593 #endif
 594 #define CONFIG_SYS_QE_FMAN_FW_LENGTH    0x10000
 595 #define CONFIG_SYS_FDT_PAD              (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 596 #endif /* CONFIG_NOBQFMAN */
 597
 598 #ifdef CONFIG_SYS_DPAA_FMAN
 599 #define CONFIG_FMAN_ENET
 600 #define CONFIG_PHYLIB_10G
 601 #define CONFIG_PHY_VITESSE
 602 #define CONFIG_PHY_REALTEK
 603 #define CONFIG_PHY_TERANETICS
 604 #define SGMII_CARD_PORT1_PHY_ADDR 0x1C
 605 #define SGMII_CARD_PORT2_PHY_ADDR 0x10
 606 #define SGMII_CARD_PORT3_PHY_ADDR 0x1E
 607 #define SGMII_CARD_PORT4_PHY_ADDR 0x11
 608 #endif
 609
 610 #ifdef CONFIG_FMAN_ENET
 611 #define CONFIG_SYS_FM1_DTSEC4_PHY_ADDR  0x01
 612 #define CONFIG_SYS_FM1_DTSEC5_PHY_ADDR  0x02
 613
 614 #define CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR    0x1c
 615 #define CONFIG_SYS_FM1_DTSEC2_RISER_PHY_ADDR    0x1d
 616 #define CONFIG_SYS_FM1_DTSEC3_RISER_PHY_ADDR    0x1e
 617 #define CONFIG_SYS_FM1_DTSEC4_RISER_PHY_ADDR    0x1f
 618
 619 #define CONFIG_MII              /* MII PHY management */
 620 #define CONFIG_ETHPRIME         "FM1@DTSEC1"
 621 #define CONFIG_PHY_GIGE         /* Include GbE speed/duplex detection */
 622 #endif
 623
 624 /* Enable VSC9953 L2 Switch driver */
 625 #define CONFIG_VSC9953
 626 #define CONFIG_SYS_FM1_QSGMII11_PHY_ADDR        0x14
 627 #define CONFIG_SYS_FM1_QSGMII21_PHY_ADDR        0x18
 628
 629 /*
 630  * Dynamic MTD Partition support with mtdparts
 631  */
 632 #ifdef CONFIG_MTD_NOR_FLASH
 633 #define CONFIG_MTD_DEVICE
 634 #define CONFIG_MTD_PARTITIONS
 635 #define CONFIG_FLASH_CFI_MTD
 636 #define MTDIDS_DEFAULT "nor0=fe8000000.nor,nand0=fff800000.flash," \
 637                         "spi0=spife110000.0"
 638 #define MTDPARTS_DEFAULT        "mtdparts=fe8000000.nor:1m(uboot),5m(kernel)," \
 639                                 "128k(dtb),96m(fs),-(user);"\
 640                                 "fff800000.flash:2m(uboot),9m(kernel),"\
 641                                 "128k(dtb),96m(fs),-(user);spife110000.0:" \
 642                                 "2m(uboot),9m(kernel),128k(dtb),-(user)"
 643 #endif
 644
 645 /*
 646  * Environment
 647  */
 648 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
 649 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 650
 651 /*
 652  * Command line configuration.
 653  */
 654 #define CONFIG_CMD_REGINFO
 655
 656 #ifdef CONFIG_PCI
 657 #define CONFIG_CMD_PCI
 658 #endif
 659
 660 /*
 661  * Miscellaneous configurable options
 662  */
 663 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 664 #define CONFIG_CMDLINE_EDITING                  /* Command-line editing */
 665 #define CONFIG_AUTO_COMPLETE                    /* add autocompletion support */
 666 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 667 #ifdef CONFIG_CMD_KGDB
 668 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size */
 669 #else
 670 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size */
 671 #endif
 672 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 673 #define CONFIG_SYS_MAXARGS      16              /* max number of command args */
 674 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
 675
 676 /*
 677  * For booting Linux, the board info and command line data
 678  * have to be in the first 64 MB of memory, since this is
 679  * the maximum mapped by the Linux kernel during initialization.
 680  */
 681 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial map for Linux*/
 682 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 683
 684 #ifdef CONFIG_CMD_KGDB
 685 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 686 #endif
 687
 688 /*
 689  * Environment Configuration
 690  */
 691 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 692 #define CONFIG_BOOTFILE         "uImage"
 693 #define CONFIG_UBOOTPATH        "u-boot.bin"    /* U-Boot image on TFTP server*/
 694
 695 /* default location for tftp and bootm */
 696 #define CONFIG_LOADADDR         1000000
 697
 698 #define __USB_PHY_TYPE  utmi
 699
 700 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 701         "hwconfig=fsl_ddr:bank_intlv=auto;"                     \
 702         "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
 703         "netdev=eth0\0"                                         \
 704         "video-mode=fslfb:1024x768-32@60,monitor=dvi\0"         \
 705         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"             \
 706         "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"     \
 707         "tftpflash=tftpboot $loadaddr $uboot && "               \
 708         "protect off $ubootaddr +$filesize && "                 \
 709         "erase $ubootaddr +$filesize && "                       \
 710         "cp.b $loadaddr $ubootaddr $filesize && "               \
 711         "protect on $ubootaddr +$filesize && "                  \
 712         "cmp.b $loadaddr $ubootaddr $filesize\0"                \
 713         "consoledev=ttyS0\0"                                    \
 714         "ramdiskaddr=2000000\0"                                 \
 715         "ramdiskfile=t1040qds/ramdisk.uboot\0"                  \
 716         "fdtaddr=1e00000\0"                                     \
 717         "fdtfile=t1040qds/t1040qds.dtb\0"                       \
 718         "bdev=sda3\0"
 719
 720 #define CONFIG_LINUX                       \
 721         "setenv bootargs root=/dev/ram rw "            \
 722         "console=$consoledev,$baudrate $othbootargs;"  \
 723         "setenv ramdiskaddr 0x02000000;"               \
 724         "setenv fdtaddr 0x00c00000;"                   \
 725         "setenv loadaddr 0x1000000;"                   \
 726         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 727
 728 #define CONFIG_HDBOOT                                   \
 729         "setenv bootargs root=/dev/$bdev rw "           \
 730         "console=$consoledev,$baudrate $othbootargs;"   \
 731         "tftp $loadaddr $bootfile;"                     \
 732         "tftp $fdtaddr $fdtfile;"                       \
 733         "bootm $loadaddr - $fdtaddr"
 734
 735 #define CONFIG_NFSBOOTCOMMAND                   \
 736         "setenv bootargs root=/dev/nfs rw "     \
 737         "nfsroot=$serverip:$rootpath "          \
 738         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 739         "console=$consoledev,$baudrate $othbootargs;"   \
 740         "tftp $loadaddr $bootfile;"             \
 741         "tftp $fdtaddr $fdtfile;"               \
 742         "bootm $loadaddr - $fdtaddr"
 743
 744 #define CONFIG_RAMBOOTCOMMAND                           \
 745         "setenv bootargs root=/dev/ram rw "             \
 746         "console=$consoledev,$baudrate $othbootargs;"   \
 747         "tftp $ramdiskaddr $ramdiskfile;"               \
 748         "tftp $loadaddr $bootfile;"                     \
 749         "tftp $fdtaddr $fdtfile;"                       \
 750         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 751
 752 #define CONFIG_BOOTCOMMAND              CONFIG_LINUX
 753
 754 #include <asm/fsl_secure_boot.h>
 755
 756 #endif  /* __CONFIG_H */