include/configs/T1040QDS.h

   1 /*
   2  * Copyright 2013 Freescale Semiconductor, Inc.
   3  *
   4  * See file CREDITS for list of people who contributed to this
   5  * project.
   6  *
   7  * This program is free software; you can redistribute it and/or
   8  * modify it under the terms of the GNU General Public License as
   9  * published by the Free Software Foundation; either version 2 of
  10  * the License, or (at your option) any later version.
  11  *
  12  * This program is distributed in the hope that it will be useful,
  13  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  15  * GNU General Public License for more details.
  16  *
  17  * You should have received a copy of the GNU General Public License
  18  * along with this program; if not, write to the Free Software
  19  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  20  * MA 02111-1307 USA
  21  */
  22
  23 #ifndef __CONFIG_H
  24 #define __CONFIG_H
  25
  26 /*
  27  * T1040 QDS board configuration file
  28  */
  29 #define CONFIG_T1040QDS
  30 #define CONFIG_PHYS_64BIT
  31
  32 #ifdef CONFIG_RAMBOOT_PBL
  33 #define CONFIG_RAMBOOT_TEXT_BASE        CONFIG_SYS_TEXT_BASE
  34 #define CONFIG_RESET_VECTOR_ADDRESS     0xfffffffc
  35 #define CONFIG_SYS_FSL_PBL_PBI board/freescale/t1040qds/t1040_pbi.cfg
  36 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t1040qds/t1040_rcw.cfg
  37 #endif
  38
  39 /* High Level Configuration Options */
  40 #define CONFIG_BOOKE
  41 #define CONFIG_E500                     /* BOOKE e500 family */
  42 #define CONFIG_E500MC                   /* BOOKE e500mc family */
  43 #define CONFIG_SYS_BOOK3E_HV            /* Category E.HV supported */
  44 #define CONFIG_MP                       /* support multiple processors */
  45
  46 #ifndef CONFIG_SYS_TEXT_BASE
  47 #define CONFIG_SYS_TEXT_BASE    0xeff40000
  48 #endif
  49
  50 #ifndef CONFIG_RESET_VECTOR_ADDRESS
  51 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
  52 #endif
  53
  54 #define CONFIG_SYS_FSL_CPC              /* Corenet Platform Cache */
  55 #define CONFIG_SYS_NUM_CPC              CONFIG_NUM_DDR_CONTROLLERS
  56 #define CONFIG_FSL_IFC                  /* Enable IFC Support */
  57 #define CONFIG_PCI                      /* Enable PCI/PCIE */
  58 #define CONFIG_PCI_INDIRECT_BRIDGE
  59 #define CONFIG_PCIE1                    /* PCIE controler 1 */
  60 #define CONFIG_PCIE2                    /* PCIE controler 2 */
  61 #define CONFIG_PCIE3                    /* PCIE controler 3 */
  62 #define CONFIG_PCIE4                    /* PCIE controler 4 */
  63
  64 #define CONFIG_FSL_PCI_INIT             /* Use common FSL init code */
  65 #define CONFIG_SYS_PCI_64BIT            /* enable 64-bit PCI resources */
  66
  67 #define CONFIG_FSL_LAW                  /* Use common FSL init code */
  68
  69 #define CONFIG_ENV_OVERWRITE
  70
  71 #ifdef CONFIG_SYS_NO_FLASH
  72 #define CONFIG_ENV_IS_NOWHERE
  73 #else
  74 #define CONFIG_FLASH_CFI_DRIVER
  75 #define CONFIG_SYS_FLASH_CFI
  76 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
  77 #endif
  78
  79 #ifndef CONFIG_SYS_NO_FLASH
  80 #if defined(CONFIG_SPIFLASH)
  81 #define CONFIG_SYS_EXTRA_ENV_RELOC
  82 #define CONFIG_ENV_IS_IN_SPI_FLASH
  83 #define CONFIG_ENV_SPI_BUS              0
  84 #define CONFIG_ENV_SPI_CS               0
  85 #define CONFIG_ENV_SPI_MAX_HZ           10000000
  86 #define CONFIG_ENV_SPI_MODE             0
  87 #define CONFIG_ENV_SIZE                 0x2000          /* 8KB */
  88 #define CONFIG_ENV_OFFSET               0x100000        /* 1MB */
  89 #define CONFIG_ENV_SECT_SIZE            0x10000
  90 #elif defined(CONFIG_SDCARD)
  91 #define CONFIG_SYS_EXTRA_ENV_RELOC
  92 #define CONFIG_ENV_IS_IN_MMC
  93 #define CONFIG_SYS_MMC_ENV_DEV          0
  94 #define CONFIG_ENV_SIZE                 0x2000
  95 #define CONFIG_ENV_OFFSET               (512 * 1658)
  96 #elif defined(CONFIG_NAND)
  97 #define CONFIG_SYS_EXTRA_ENV_RELOC
  98 #define CONFIG_ENV_IS_IN_NAND
  99 #define CONFIG_ENV_SIZE                 CONFIG_SYS_NAND_BLOCK_SIZE
 100 #define CONFIG_ENV_OFFSET               (7 * CONFIG_SYS_NAND_BLOCK_SIZE)
 101 #else
 102 #define CONFIG_ENV_IS_IN_FLASH
 103 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 104 #define CONFIG_ENV_SIZE         0x2000
 105 #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
 106 #endif
 107 #else /* CONFIG_SYS_NO_FLASH */
 108 #define CONFIG_ENV_SIZE                0x2000
 109 #define CONFIG_ENV_SECT_SIZE   0x20000 /* 128K (one sector) */
 110 #endif
 111
 112 #ifndef __ASSEMBLY__
 113 unsigned long get_board_sys_clk(void);
 114 unsigned long get_board_ddr_clk(void);
 115 #endif
 116
 117 #define CONFIG_SYS_CLK_FREQ     get_board_sys_clk() /* sysclk for MPC85xx */
 118 #define CONFIG_DDR_CLK_FREQ     get_board_ddr_clk()
 119
 120 /*
 121  * These can be toggled for performance analysis, otherwise use default.
 122  */
 123 #define CONFIG_SYS_CACHE_STASHING
 124 #define CONFIG_BACKSIDE_L2_CACHE
 125 #define CONFIG_SYS_INIT_L2CSR0          L2CSR0_L2E
 126 #define CONFIG_BTB                      /* toggle branch predition */
 127 #define CONFIG_DDR_ECC
 128 #ifdef CONFIG_DDR_ECC
 129 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
 130 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
 131 #endif
 132
 133 #define CONFIG_ENABLE_36BIT_PHYS
 134
 135 #define CONFIG_ADDR_MAP
 136 #define CONFIG_SYS_NUM_ADDR_MAP         64      /* number of TLB1 entries */
 137
 138 #define CONFIG_SYS_MEMTEST_START        0x00200000      /* memtest works on */
 139 #define CONFIG_SYS_MEMTEST_END          0x00400000
 140 #define CONFIG_SYS_ALT_MEMTEST
 141 #define CONFIG_PANIC_HANG       /* do not reset board on panic */
 142
 143 /*
 144  *  Config the L3 Cache as L3 SRAM
 145  */
 146 #define CONFIG_SYS_INIT_L3_ADDR         0xFFFC0000
 147
 148 #define CONFIG_SYS_DCSRBAR              0xf0000000
 149 #define CONFIG_SYS_DCSRBAR_PHYS         0xf00000000ull
 150
 151 /* EEPROM */
 152 #define CONFIG_ID_EEPROM
 153 #define CONFIG_SYS_I2C_EEPROM_NXID
 154 #define CONFIG_SYS_EEPROM_BUS_NUM       0
 155 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x57
 156 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  1
 157 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
 158 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
 159
 160 /*
 161  * DDR Setup
 162  */
 163 #define CONFIG_VERY_BIG_RAM
 164 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 165 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 166
 167 /* CONFIG_NUM_DDR_CONTROLLERS is defined in include/asm/config_mpc85xx.h */
 168 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 169 #define CONFIG_CHIP_SELECTS_PER_CTRL    (2 * CONFIG_DIMM_SLOTS_PER_CTLR)
 170
 171 #define CONFIG_DDR_SPD
 172 #define CONFIG_SYS_FSL_DDR3
 173 #define CONFIG_FSL_DDR_INTERACTIVE
 174
 175 #define CONFIG_SYS_SPD_BUS_NUM  0
 176 #define SPD_EEPROM_ADDRESS      0x51
 177
 178 #define CONFIG_SYS_SDRAM_SIZE   4096    /* for fixed parameter use */
 179
 180 /*
 181  * IFC Definitions
 182  */
 183 #define CONFIG_SYS_FLASH_BASE   0xe0000000
 184 #define CONFIG_SYS_FLASH_BASE_PHYS      (0xf00000000ull | CONFIG_SYS_FLASH_BASE)
 185
 186 #define CONFIG_SYS_NOR0_CSPR_EXT        (0xf)
 187 #define CONFIG_SYS_NOR0_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \
 188                                 + 0x8000000) | \
 189                                 CSPR_PORT_SIZE_16 | \
 190                                 CSPR_MSEL_NOR | \
 191                                 CSPR_V)
 192 #define CONFIG_SYS_NOR1_CSPR_EXT        (0xf)
 193 #define CONFIG_SYS_NOR1_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
 194                                 CSPR_PORT_SIZE_16 | \
 195                                 CSPR_MSEL_NOR | \
 196                                 CSPR_V)
 197 #define CONFIG_SYS_NOR_AMASK    IFC_AMASK(128*1024*1024)
 198 /* NOR Flash Timing Params */
 199 #define CONFIG_SYS_NOR_CSOR     CSOR_NAND_TRHZ_80
 200 #define CONFIG_SYS_NOR_FTIM0    (FTIM0_NOR_TACSE(0x4) | \
 201                                 FTIM0_NOR_TEADC(0x5) | \
 202                                 FTIM0_NOR_TEAHC(0x5))
 203 #define CONFIG_SYS_NOR_FTIM1    (FTIM1_NOR_TACO(0x35) | \
 204                                 FTIM1_NOR_TRAD_NOR(0x1A) |\
 205                                 FTIM1_NOR_TSEQRAD_NOR(0x13))
 206 #define CONFIG_SYS_NOR_FTIM2    (FTIM2_NOR_TCS(0x4) | \
 207                                 FTIM2_NOR_TCH(0x4) | \
 208                                 FTIM2_NOR_TWPH(0x0E) | \
 209                                 FTIM2_NOR_TWP(0x1c))
 210 #define CONFIG_SYS_NOR_FTIM3    0x0
 211
 212 #define CONFIG_SYS_FLASH_QUIET_TEST
 213 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
 214
 215 #define CONFIG_SYS_MAX_FLASH_BANKS      2       /* number of banks */
 216 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device */
 217 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 218 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 219
 220 #define CONFIG_SYS_FLASH_EMPTY_INFO
 221 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS \
 222                                         + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS}
 223 #define CONFIG_FSL_QIXIS        /* use common QIXIS code */
 224 #define QIXIS_BASE              0xffdf0000
 225 #define QIXIS_BASE_PHYS         (0xf00000000ull | QIXIS_BASE)
 226 #define QIXIS_LBMAP_SWITCH              0x06
 227 #define QIXIS_LBMAP_MASK                0x0f
 228 #define QIXIS_LBMAP_SHIFT               0
 229 #define QIXIS_LBMAP_DFLTBANK            0x00
 230 #define QIXIS_LBMAP_ALTBANK             0x04
 231 #define QIXIS_RST_CTL_RESET             0x31
 232 #define QIXIS_RCFG_CTL_RECONFIG_IDLE    0x20
 233 #define QIXIS_RCFG_CTL_RECONFIG_START   0x21
 234 #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE   0x08
 235 #define QIXIS_RST_FORCE_MEM             0x01
 236
 237 #define CONFIG_SYS_CSPR3_EXT    (0xf)
 238 #define CONFIG_SYS_CSPR3        (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) \
 239                                 | CSPR_PORT_SIZE_8 \
 240                                 | CSPR_MSEL_GPCM \
 241                                 | CSPR_V)
 242 #define CONFIG_SYS_AMASK3       IFC_AMASK(4*1024)
 243 #define CONFIG_SYS_CSOR3        0x0
 244 /* QIXIS Timing parameters for IFC CS3 */
 245 #define CONFIG_SYS_CS3_FTIM0            (FTIM0_GPCM_TACSE(0x0e) | \
 246                                         FTIM0_GPCM_TEADC(0x0e) | \
 247                                         FTIM0_GPCM_TEAHC(0x0e))
 248 #define CONFIG_SYS_CS3_FTIM1            (FTIM1_GPCM_TACO(0xff) | \
 249                                         FTIM1_GPCM_TRAD(0x3f))
 250 #define CONFIG_SYS_CS3_FTIM2            (FTIM2_GPCM_TCS(0x0e) | \
 251                                         FTIM2_GPCM_TCH(0x8) | \
 252                                         FTIM2_GPCM_TWP(0x1f))
 253 #define CONFIG_SYS_CS3_FTIM3            0x0
 254
 255 #define CONFIG_NAND_FSL_IFC
 256 #define CONFIG_SYS_NAND_BASE            0xff800000
 257 #define CONFIG_SYS_NAND_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_NAND_BASE)
 258
 259 #define CONFIG_SYS_NAND_CSPR_EXT        (0xf)
 260 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 261                                 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
 262                                 | CSPR_MSEL_NAND        /* MSEL = NAND */ \
 263                                 | CSPR_V)
 264 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64*1024)
 265
 266 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 267                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 268                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
 269                                 | CSOR_NAND_RAL_3       /* RAL = 3Byes */ \
 270                                 | CSOR_NAND_PGS_2K      /* Page Size = 2K */ \
 271                                 | CSOR_NAND_SPRZ_64/* Spare size = 64 */ \
 272                                 | CSOR_NAND_PB(64))     /*Pages Per Block = 64*/
 273
 274 #define CONFIG_SYS_NAND_ONFI_DETECTION
 275
 276 /* ONFI NAND Flash mode0 Timing Params */
 277 #define CONFIG_SYS_NAND_FTIM0           (FTIM0_NAND_TCCST(0x07) | \
 278                                         FTIM0_NAND_TWP(0x18)   | \
 279                                         FTIM0_NAND_TWCHT(0x07) | \
 280                                         FTIM0_NAND_TWH(0x0a))
 281 #define CONFIG_SYS_NAND_FTIM1           (FTIM1_NAND_TADLE(0x32) | \
 282                                         FTIM1_NAND_TWBE(0x39)  | \
 283                                         FTIM1_NAND_TRR(0x0e)   | \
 284                                         FTIM1_NAND_TRP(0x18))
 285 #define CONFIG_SYS_NAND_FTIM2           (FTIM2_NAND_TRAD(0x0f) | \
 286                                         FTIM2_NAND_TREH(0x0a) | \
 287                                         FTIM2_NAND_TWHRE(0x1e))
 288 #define CONFIG_SYS_NAND_FTIM3           0x0
 289
 290 #define CONFIG_SYS_NAND_DDR_LAW         11
 291 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
 292 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 293 #define CONFIG_MTD_NAND_VERIFY_WRITE
 294 #define CONFIG_CMD_NAND
 295
 296 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128 * 1024)
 297
 298 #if defined(CONFIG_NAND)
 299 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NAND_CSPR_EXT
 300 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
 301 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
 302 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
 303 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
 304 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
 305 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
 306 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
 307 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 308 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR0_CSPR
 309 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
 310 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 311 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 312 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 313 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 314 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 315 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NOR1_CSPR_EXT
 316 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NOR1_CSPR
 317 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NOR_AMASK
 318 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NOR_CSOR
 319 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NOR_FTIM0
 320 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NOR_FTIM1
 321 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NOR_FTIM2
 322 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NOR_FTIM3
 323 #else
 324 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 325 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR0_CSPR
 326 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 327 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 328 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 329 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 330 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 331 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 332 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR1_CSPR_EXT
 333 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR1_CSPR
 334 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
 335 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 336 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 337 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 338 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 339 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 340 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NAND_CSPR_EXT
 341 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NAND_CSPR
 342 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NAND_AMASK
 343 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NAND_CSOR
 344 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NAND_FTIM0
 345 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NAND_FTIM1
 346 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NAND_FTIM2
 347 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NAND_FTIM3
 348 #endif
 349
 350 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_TEXT_BASE
 351
 352 #if defined(CONFIG_RAMBOOT_PBL)
 353 #define CONFIG_SYS_RAMBOOT
 354 #endif
 355
 356 #define CONFIG_BOARD_EARLY_INIT_R
 357 #define CONFIG_MISC_INIT_R
 358
 359 #define CONFIG_HWCONFIG
 360
 361 /* define to use L1 as initial stack */
 362 #define CONFIG_L1_INIT_RAM
 363 #define CONFIG_SYS_INIT_RAM_LOCK
 364 #define CONFIG_SYS_INIT_RAM_ADDR        0xfdd00000      /* Initial L1 address */
 365 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH      0xf
 366 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW       0xfe0ec000
 367 /* The assembler doesn't like typecast */
 368 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
 369         ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
 370           CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
 371 #define CONFIG_SYS_INIT_RAM_SIZE                0x00004000
 372
 373 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - \
 374                                         GENERATED_GBL_DATA_SIZE)
 375 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 376
 377 #define CONFIG_SYS_MONITOR_LEN          (512 * 1024)
 378 #define CONFIG_SYS_MALLOC_LEN           (10 * 1024 * 1024)
 379
 380 /* Serial Port - controlled on board with jumper J8
 381  * open - index 2
 382  * shorted - index 1
 383  */
 384 #define CONFIG_CONS_INDEX       1
 385 #define CONFIG_SYS_NS16550
 386 #define CONFIG_SYS_NS16550_SERIAL
 387 #define CONFIG_SYS_NS16550_REG_SIZE     1
 388 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
 389
 390 #define CONFIG_SYS_BAUDRATE_TABLE       \
 391         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 392
 393 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
 394 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
 395 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
 396 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
 397 #define CONFIG_SERIAL_MULTI             /* Enable both serial ports */
 398 #define CONFIG_SYS_CONSOLE_IS_IN_ENV    /* determine from environment */
 399
 400 /* Use the HUSH parser */
 401 #define CONFIG_SYS_HUSH_PARSER
 402 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
 403
 404 /* Video */
 405 #define CONFIG_FSL_DIU_FB
 406 #ifdef CONFIG_FSL_DIU_FB
 407 #define CONFIG_SYS_DIU_ADDR     (CONFIG_SYS_CCSRBAR + 0x180000)
 408 #define CONFIG_VIDEO
 409 #define CONFIG_CMD_BMP
 410 #define CONFIG_CFB_CONSOLE
 411 #define CONFIG_VIDEO_SW_CURSOR
 412 #define CONFIG_VGA_AS_SINGLE_DEVICE
 413 #define CONFIG_VIDEO_LOGO
 414 #define CONFIG_VIDEO_BMP_LOGO
 415 #define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS
 416 /*
 417  * With CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS, flash I/O is really slow, so
 418  * disable empty flash sector detection, which is I/O-intensive.
 419  */
 420 #undef CONFIG_SYS_FLASH_EMPTY_INFO
 421 #endif
 422
 423 /* pass open firmware flat tree */
 424 #define CONFIG_OF_LIBFDT
 425 #define CONFIG_OF_BOARD_SETUP
 426 #define CONFIG_OF_STDOUT_VIA_ALIAS
 427
 428 /* new uImage format support */
 429 #define CONFIG_FIT
 430 #define CONFIG_FIT_VERBOSE      /* enable fit_format_{error,warning}() */
 431
 432 /* I2C */
 433 #define CONFIG_SYS_I2C
 434 #define CONFIG_SYS_I2C_FSL              /* Use FSL common I2C driver */
 435 #define CONFIG_SYS_FSL_I2C_SPEED        50000   /* I2C speed in Hz */
 436 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 437 #define CONFIG_SYS_FSL_I2C2_SPEED       50000   /* I2C speed in Hz */
 438 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
 439 #define CONFIG_SYS_FSL_I2C_OFFSET       0x118000
 440 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x119000
 441
 442 #define I2C_MUX_PCA_ADDR                0x77
 443 #define I2C_MUX_PCA_ADDR_PRI            0x77 /* Primary Mux*/
 444
 445
 446 /* I2C bus multiplexer */
 447 #define I2C_MUX_CH_DEFAULT      0x8
 448 #define I2C_MUX_CH_DIU          0xC
 449
 450 /* LDI/DVI Encoder for display */
 451 #define CONFIG_SYS_I2C_LDI_ADDR         0x38
 452 #define CONFIG_SYS_I2C_DVI_ADDR         0x75
 453
 454 /*
 455  * RTC configuration
 456  */
 457 #define RTC
 458 #define CONFIG_RTC_DS3231               1
 459 #define CONFIG_SYS_I2C_RTC_ADDR         0x68
 460
 461 /*
 462  * eSPI - Enhanced SPI
 463  */
 464 #define CONFIG_FSL_ESPI
 465 #define CONFIG_SPI_FLASH
 466 #define CONFIG_SPI_FLASH_STMICRO
 467 #define CONFIG_SPI_FLASH_SST
 468 #define CONFIG_SPI_FLASH_EON
 469 #define CONFIG_CMD_SF
 470 #define CONFIG_SF_DEFAULT_SPEED         10000000
 471 #define CONFIG_SF_DEFAULT_MODE          0
 472
 473 /*
 474  * General PCI
 475  * Memory space is mapped 1-1, but I/O space must start from 0.
 476  */
 477
 478 #ifdef CONFIG_PCI
 479 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
 480 #ifdef CONFIG_PCIE1
 481 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
 482 #define CONFIG_SYS_PCIE1_MEM_BUS        0xe0000000
 483 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
 484 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x10000000      /* 256M */
 485 #define CONFIG_SYS_PCIE1_IO_VIRT        0xf8000000
 486 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 487 #define CONFIG_SYS_PCIE1_IO_PHYS        0xff8000000ull
 488 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 489 #endif
 490
 491 /* controller 2, Slot 2, tgtid 2, Base address 201000 */
 492 #ifdef CONFIG_PCIE2
 493 #define CONFIG_SYS_PCIE2_MEM_VIRT       0x90000000
 494 #define CONFIG_SYS_PCIE2_MEM_BUS        0xe0000000
 495 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc10000000ull
 496 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x10000000      /* 256M */
 497 #define CONFIG_SYS_PCIE2_IO_VIRT        0xf8010000
 498 #define CONFIG_SYS_PCIE2_IO_BUS         0x00000000
 499 #define CONFIG_SYS_PCIE2_IO_PHYS        0xff8010000ull
 500 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00010000      /* 64k */
 501 #endif
 502
 503 /* controller 3, Slot 1, tgtid 1, Base address 202000 */
 504 #ifdef CONFIG_PCIE3
 505 #define CONFIG_SYS_PCIE3_MEM_VIRT       0xa0000000
 506 #define CONFIG_SYS_PCIE3_MEM_BUS        0xe0000000
 507 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc20000000ull
 508 #define CONFIG_SYS_PCIE3_MEM_SIZE       0x10000000      /* 256M */
 509 #define CONFIG_SYS_PCIE3_IO_VIRT        0xf8020000
 510 #define CONFIG_SYS_PCIE3_IO_BUS         0x00000000
 511 #define CONFIG_SYS_PCIE3_IO_PHYS        0xff8020000ull
 512 #define CONFIG_SYS_PCIE3_IO_SIZE        0x00010000      /* 64k */
 513 #endif
 514
 515 /* controller 4, Base address 203000 */
 516 #ifdef CONFIG_PCIE4
 517 #define CONFIG_SYS_PCIE4_MEM_VIRT       0xb0000000
 518 #define CONFIG_SYS_PCIE4_MEM_BUS        0xe0000000
 519 #define CONFIG_SYS_PCIE4_MEM_PHYS       0xc30000000ull
 520 #define CONFIG_SYS_PCIE4_MEM_SIZE       0x10000000      /* 256M */
 521 #define CONFIG_SYS_PCIE4_IO_VIRT        0xf8030000
 522 #define CONFIG_SYS_PCIE4_IO_BUS         0x00000000
 523 #define CONFIG_SYS_PCIE4_IO_PHYS        0xff8030000ull
 524 #define CONFIG_SYS_PCIE4_IO_SIZE        0x00010000      /* 64k */
 525 #endif
 526
 527 #define CONFIG_PCI_PNP                  /* do pci plug-and-play */
 528 #define CONFIG_E1000
 529
 530 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 531 #define CONFIG_DOS_PARTITION
 532 #endif  /* CONFIG_PCI */
 533
 534 /* SATA */
 535 #define CONFIG_FSL_SATA_V2
 536 #ifdef CONFIG_FSL_SATA_V2
 537 #define CONFIG_LIBATA
 538 #define CONFIG_FSL_SATA
 539
 540 #define CONFIG_SYS_SATA_MAX_DEVICE      2
 541 #define CONFIG_SATA1
 542 #define CONFIG_SYS_SATA1                CONFIG_SYS_MPC85xx_SATA1_ADDR
 543 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
 544 #define CONFIG_SATA2
 545 #define CONFIG_SYS_SATA2                CONFIG_SYS_MPC85xx_SATA2_ADDR
 546 #define CONFIG_SYS_SATA2_FLAGS          FLAGS_DMA
 547
 548 #define CONFIG_LBA48
 549 #define CONFIG_CMD_SATA
 550 #define CONFIG_DOS_PARTITION
 551 #define CONFIG_CMD_EXT2
 552 #endif
 553
 554 /*
 555 * USB
 556 */
 557 #define CONFIG_HAS_FSL_DR_USB
 558
 559 #ifdef CONFIG_HAS_FSL_DR_USB
 560 #define CONFIG_USB_EHCI
 561
 562 #ifdef CONFIG_USB_EHCI
 563 #define CONFIG_CMD_USB
 564 #define CONFIG_USB_STORAGE
 565 #define CONFIG_USB_EHCI_FSL
 566 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 567 #define CONFIG_CMD_EXT2
 568 #endif
 569 #endif
 570
 571 #define CONFIG_MMC
 572
 573 #ifdef CONFIG_MMC
 574 #define CONFIG_FSL_ESDHC
 575 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 576 #define CONFIG_CMD_MMC
 577 #define CONFIG_GENERIC_MMC
 578 #define CONFIG_CMD_EXT2
 579 #define CONFIG_CMD_FAT
 580 #define CONFIG_DOS_PARTITION
 581 #endif
 582
 583 /* Qman/Bman */
 584 #ifndef CONFIG_NOBQFMAN
 585 #define CONFIG_SYS_DPAA_QBMAN           /* Support Q/Bman */
 586 #define CONFIG_SYS_BMAN_NUM_PORTALS     25
 587 #define CONFIG_SYS_BMAN_MEM_BASE        0xf4000000
 588 #define CONFIG_SYS_BMAN_MEM_PHYS        0xff4000000ull
 589 #define CONFIG_SYS_BMAN_MEM_SIZE        0x02000000
 590 #define CONFIG_SYS_QMAN_NUM_PORTALS     25
 591 #define CONFIG_SYS_QMAN_MEM_BASE        0xf6000000
 592 #define CONFIG_SYS_QMAN_MEM_PHYS        0xff6000000ull
 593 #define CONFIG_SYS_QMAN_MEM_SIZE        0x02000000
 594
 595 #define CONFIG_SYS_DPAA_FMAN
 596 #define CONFIG_SYS_DPAA_PME
 597
 598 /* Default address of microcode for the Linux Fman driver */
 599 #if defined(CONFIG_SPIFLASH)
 600 /*
 601  * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
 602  * env, so we got 0x110000.
 603  */
 604 #define CONFIG_SYS_QE_FW_IN_SPIFLASH
 605 #define CONFIG_SYS_QE_FMAN_FW_ADDR      0x110000
 606 #elif defined(CONFIG_SDCARD)
 607 /*
 608  * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
 609  * about 825KB (1650 blocks), Env is stored after the image, and the env size is
 610  * 0x2000 (16 blocks), 8 + 1650 + 16 = 1674, enlarge it to 1680.
 611  */
 612 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC
 613 #define CONFIG_SYS_QE_FMAN_FW_ADDR      (512 * 1680)
 614 #elif defined(CONFIG_NAND)
 615 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND
 616 #define CONFIG_SYS_QE_FMAN_FW_ADDR      (8 * CONFIG_SYS_NAND_BLOCK_SIZE)
 617 #else
 618 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
 619 #define CONFIG_SYS_QE_FMAN_FW_ADDR              0xEFF00000
 620 #endif
 621 #define CONFIG_SYS_QE_FMAN_FW_LENGTH    0x10000
 622 #define CONFIG_SYS_FDT_PAD              (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 623 #endif /* CONFIG_NOBQFMAN */
 624
 625 #ifdef CONFIG_SYS_DPAA_FMAN
 626 #define CONFIG_FMAN_ENET
 627 #define CONFIG_PHYLIB_10G
 628 #define CONFIG_PHY_VITESSE
 629 #define CONFIG_PHY_REALTEK
 630 #define CONFIG_PHY_TERANETICS
 631 #define SGMII_CARD_PORT1_PHY_ADDR 0x1C
 632 #define SGMII_CARD_PORT2_PHY_ADDR 0x10
 633 #define SGMII_CARD_PORT3_PHY_ADDR 0x1E
 634 #define SGMII_CARD_PORT4_PHY_ADDR 0x11
 635 #endif
 636
 637 #ifdef CONFIG_FMAN_ENET
 638 #define CONFIG_SYS_FM1_DTSEC4_PHY_ADDR  0x01
 639 #define CONFIG_SYS_FM1_DTSEC5_PHY_ADDR  0x02
 640
 641 #define CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR    0x1c
 642 #define CONFIG_SYS_FM1_DTSEC2_RISER_PHY_ADDR    0x1d
 643 #define CONFIG_SYS_FM1_DTSEC3_RISER_PHY_ADDR    0x1e
 644 #define CONFIG_SYS_FM1_DTSEC4_RISER_PHY_ADDR    0x1f
 645
 646 #define CONFIG_MII              /* MII PHY management */
 647 #define CONFIG_ETHPRIME         "FM1@DTSEC1"
 648 #define CONFIG_PHY_GIGE         /* Include GbE speed/duplex detection */
 649 #endif
 650
 651 /*
 652  * Environment
 653  */
 654 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
 655 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 656
 657 /*
 658  * Command line configuration.
 659  */
 660 #include <config_cmd_default.h>
 661
 662 #define CONFIG_CMD_DATE
 663 #define CONFIG_CMD_DHCP
 664 #define CONFIG_CMD_EEPROM
 665 #define CONFIG_CMD_ELF
 666 #define CONFIG_CMD_ERRATA
 667 #define CONFIG_CMD_GREPENV
 668 #define CONFIG_CMD_IRQ
 669 #define CONFIG_CMD_I2C
 670 #define CONFIG_CMD_MII
 671 #define CONFIG_CMD_PING
 672 #define CONFIG_CMD_REGINFO
 673 #define CONFIG_CMD_SETEXPR
 674
 675 #ifdef CONFIG_PCI
 676 #define CONFIG_CMD_PCI
 677 #define CONFIG_CMD_NET
 678 #endif
 679
 680 /*
 681  * Miscellaneous configurable options
 682  */
 683 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 684 #define CONFIG_CMDLINE_EDITING                  /* Command-line editing */
 685 #define CONFIG_AUTO_COMPLETE                    /* add autocompletion support */
 686 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 687 #define CONFIG_SYS_PROMPT       "=> "           /* Monitor Command Prompt */
 688 #ifdef CONFIG_CMD_KGDB
 689 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size */
 690 #else
 691 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size */
 692 #endif
 693 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 694 #define CONFIG_SYS_MAXARGS      16              /* max number of command args */
 695 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
 696
 697 /*
 698  * For booting Linux, the board info and command line data
 699  * have to be in the first 64 MB of memory, since this is
 700  * the maximum mapped by the Linux kernel during initialization.
 701  */
 702 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial map for Linux*/
 703 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 704
 705 #ifdef CONFIG_CMD_KGDB
 706 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 707 #endif
 708
 709 /*
 710  * Environment Configuration
 711  */
 712 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 713 #define CONFIG_BOOTFILE         "uImage"
 714 #define CONFIG_UBOOTPATH        "u-boot.bin"    /* U-Boot image on TFTP server*/
 715
 716 /* default location for tftp and bootm */
 717 #define CONFIG_LOADADDR         1000000
 718
 719 #define CONFIG_BOOTDELAY        10      /* -1 disables auto-boot */
 720
 721 #define CONFIG_BAUDRATE 115200
 722
 723 #define __USB_PHY_TYPE  utmi
 724
 725 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 726         "hwconfig=fsl_ddr:ctlr_intlv=cacheline,"                \
 727         "bank_intlv=cs0_cs1;"                                   \
 728         "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
 729         "netdev=eth0\0"                                         \
 730         "video-mode=fslfb:1024x768-32@60,monitor=dvi\0"         \
 731         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"             \
 732         "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"     \
 733         "tftpflash=tftpboot $loadaddr $uboot && "               \
 734         "protect off $ubootaddr +$filesize && "                 \
 735         "erase $ubootaddr +$filesize && "                       \
 736         "cp.b $loadaddr $ubootaddr $filesize && "               \
 737         "protect on $ubootaddr +$filesize && "                  \
 738         "cmp.b $loadaddr $ubootaddr $filesize\0"                \
 739         "consoledev=ttyS0\0"                                    \
 740         "ramdiskaddr=2000000\0"                                 \
 741         "ramdiskfile=t1040qds/ramdisk.uboot\0"                  \
 742         "fdtaddr=c00000\0"                                      \
 743         "fdtfile=t1040qds/t1040qds.dtb\0"                       \
 744         "bdev=sda3\0"                                           \
 745         "c=ffe\0"
 746
 747 #define CONFIG_LINUX                       \
 748         "setenv bootargs root=/dev/ram rw "            \
 749         "console=$consoledev,$baudrate $othbootargs;"  \
 750         "setenv ramdiskaddr 0x02000000;"               \
 751         "setenv fdtaddr 0x00c00000;"                   \
 752         "setenv loadaddr 0x1000000;"                   \
 753         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 754
 755 #define CONFIG_HDBOOT                                   \
 756         "setenv bootargs root=/dev/$bdev rw "           \
 757         "console=$consoledev,$baudrate $othbootargs;"   \
 758         "tftp $loadaddr $bootfile;"                     \
 759         "tftp $fdtaddr $fdtfile;"                       \
 760         "bootm $loadaddr - $fdtaddr"
 761
 762 #define CONFIG_NFSBOOTCOMMAND                   \
 763         "setenv bootargs root=/dev/nfs rw "     \
 764         "nfsroot=$serverip:$rootpath "          \
 765         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 766         "console=$consoledev,$baudrate $othbootargs;"   \
 767         "tftp $loadaddr $bootfile;"             \
 768         "tftp $fdtaddr $fdtfile;"               \
 769         "bootm $loadaddr - $fdtaddr"
 770
 771 #define CONFIG_RAMBOOTCOMMAND                           \
 772         "setenv bootargs root=/dev/ram rw "             \
 773         "console=$consoledev,$baudrate $othbootargs;"   \
 774         "tftp $ramdiskaddr $ramdiskfile;"               \
 775         "tftp $loadaddr $bootfile;"                     \
 776         "tftp $fdtaddr $fdtfile;"                       \
 777         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 778
 779 #define CONFIG_BOOTCOMMAND              CONFIG_LINUX
 780
 781 #ifdef CONFIG_SECURE_BOOT
 782 #include <asm/fsl_secure_boot.h>
 783 #endif
 784
 785 #endif  /* __CONFIG_H */