include/configs/T102xRDB.h

   1 /*
   2  * Copyright 2014 Freescale Semiconductor, Inc.
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 /*
   8  * T1024/T1023 RDB board configuration file
   9  */
  10
  11 #ifndef __T1024RDB_H
  12 #define __T1024RDB_H
  13
  14 /* High Level Configuration Options */
  15 #define CONFIG_BOOKE
  16 #define CONFIG_E500                     /* BOOKE e500 family */
  17 #define CONFIG_E500MC                   /* BOOKE e500mc family */
  18 #define CONFIG_SYS_BOOK3E_HV            /* Category E.HV supported */
  19 #define CONFIG_MP                       /* support multiple processors */
  20 #define CONFIG_ENABLE_36BIT_PHYS
  21
  22 #ifdef CONFIG_PHYS_64BIT
  23 #define CONFIG_ADDR_MAP         1
  24 #define CONFIG_SYS_NUM_ADDR_MAP 64      /* number of TLB1 entries */
  25 #endif
  26
  27 #define CONFIG_SYS_FSL_CPC              /* Corenet Platform Cache */
  28 #define CONFIG_SYS_NUM_CPC              CONFIG_NUM_DDR_CONTROLLERS
  29 #define CONFIG_FSL_IFC                  /* Enable IFC Support */
  30
  31 #define CONFIG_FSL_LAW                  /* Use common FSL init code */
  32 #define CONFIG_ENV_OVERWRITE
  33
  34 #define CONFIG_FSL_CAAM                 /* Enable SEC/CAAM */
  35
  36 /* support deep sleep */
  37 #ifdef CONFIG_PPC_T1024
  38 #define CONFIG_DEEP_SLEEP
  39 #endif
  40 #if defined(CONFIG_DEEP_SLEEP)
  41 #define CONFIG_SILENT_CONSOLE
  42 #define CONFIG_BOARD_EARLY_INIT_F
  43 #endif
  44
  45 #ifdef CONFIG_RAMBOOT_PBL
  46 #define CONFIG_SYS_FSL_PBL_PBI board/freescale/t102xrdb/t1024_pbi.cfg
  47 #if defined(CONFIG_T1024RDB)
  48 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xrdb/t1024_rcw.cfg
  49 #elif defined(CONFIG_T1023RDB)
  50 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xrdb/t1023_rcw.cfg
  51 #endif
  52 #define CONFIG_SPL_FLUSH_IMAGE
  53 #define CONFIG_SPL_TARGET               "u-boot-with-spl.bin"
  54 #define CONFIG_FSL_LAW                  /* Use common FSL init code */
  55 #define CONFIG_SYS_TEXT_BASE            0x30001000
  56 #define CONFIG_SPL_TEXT_BASE            0xFFFD8000
  57 #define CONFIG_SPL_PAD_TO               0x40000
  58 #define CONFIG_SPL_MAX_SIZE             0x28000
  59 #define RESET_VECTOR_OFFSET             0x27FFC
  60 #define BOOT_PAGE_OFFSET                0x27000
  61 #ifdef CONFIG_SPL_BUILD
  62 #define CONFIG_SPL_SKIP_RELOCATE
  63 #define CONFIG_SPL_COMMON_INIT_DDR
  64 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
  65 #define CONFIG_SYS_NO_FLASH
  66 #endif
  67
  68 #ifdef CONFIG_NAND
  69 #define CONFIG_SYS_NAND_U_BOOT_SIZE     (768 << 10)
  70 #define CONFIG_SYS_NAND_U_BOOT_DST      0x30000000
  71 #define CONFIG_SYS_NAND_U_BOOT_START    0x30000000
  72 #define CONFIG_SYS_NAND_U_BOOT_OFFS     (256 << 10)
  73 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
  74 #define CONFIG_SPL_NAND_BOOT
  75 #endif
  76
  77 #ifdef CONFIG_SPIFLASH
  78 #define CONFIG_RESET_VECTOR_ADDRESS             0x30000FFC
  79 #define CONFIG_SPL_SPI_FLASH_MINIMAL
  80 #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE        (768 << 10)
  81 #define CONFIG_SYS_SPI_FLASH_U_BOOT_DST         (0x30000000)
  82 #define CONFIG_SYS_SPI_FLASH_U_BOOT_START       (0x30000000)
  83 #define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS        (256 << 10)
  84 #define CONFIG_SYS_LDSCRIPT             "arch/powerpc/cpu/mpc85xx/u-boot.lds"
  85 #ifndef CONFIG_SPL_BUILD
  86 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
  87 #endif
  88 #define CONFIG_SPL_SPI_BOOT
  89 #endif
  90
  91 #ifdef CONFIG_SDCARD
  92 #define CONFIG_RESET_VECTOR_ADDRESS     0x30000FFC
  93 #define CONFIG_SPL_MMC_MINIMAL
  94 #define CONFIG_SYS_MMC_U_BOOT_SIZE      (768 << 10)
  95 #define CONFIG_SYS_MMC_U_BOOT_DST       (0x30000000)
  96 #define CONFIG_SYS_MMC_U_BOOT_START     (0x30000000)
  97 #define CONFIG_SYS_MMC_U_BOOT_OFFS      (260 << 10)
  98 #define CONFIG_SYS_LDSCRIPT             "arch/powerpc/cpu/mpc85xx/u-boot.lds"
  99 #ifndef CONFIG_SPL_BUILD
 100 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
 101 #endif
 102 #define CONFIG_SPL_MMC_BOOT
 103 #endif
 104
 105 #endif /* CONFIG_RAMBOOT_PBL */
 106
 107 #ifndef CONFIG_SYS_TEXT_BASE
 108 #define CONFIG_SYS_TEXT_BASE    0xeff40000
 109 #endif
 110
 111 #ifndef CONFIG_RESET_VECTOR_ADDRESS
 112 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
 113 #endif
 114
 115 #ifndef CONFIG_SYS_NO_FLASH
 116 #define CONFIG_FLASH_CFI_DRIVER
 117 #define CONFIG_SYS_FLASH_CFI
 118 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 119 #endif
 120
 121 /* PCIe Boot - Master */
 122 #define CONFIG_SRIO_PCIE_BOOT_MASTER
 123 /*
 124  * for slave u-boot IMAGE instored in master memory space,
 125  * PHYS must be aligned based on the SIZE
 126  */
 127 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff00000ull
 128 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE     0x100000 /* 1M */
 129 #ifdef CONFIG_PHYS_64BIT
 130 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef200000ull
 131 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff00000ull
 132 #else
 133 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xef200000
 134 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0xfff00000
 135 #endif
 136 /*
 137  * for slave UCODE and ENV instored in master memory space,
 138  * PHYS must be aligned based on the SIZE
 139  */
 140 #ifdef CONFIG_PHYS_64BIT
 141 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef100000ull
 142 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS  0x3ffe00000ull
 143 #else
 144 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xef100000
 145 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS  0xffe00000
 146 #endif
 147 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE    0x40000 /* 256K */
 148 /* slave core release by master*/
 149 #define CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET        0xe00e4
 150 #define CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK      0x00000001 /* release core 0 */
 151
 152 /* PCIe Boot - Slave */
 153 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
 154 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR 0xFFE00000
 155 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS \
 156                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR)
 157 /* Set 1M boot space for PCIe boot */
 158 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_SYS_TEXT_BASE & 0xfff00000)
 159 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS       \
 160                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR)
 161 #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc
 162 #define CONFIG_SYS_NO_FLASH
 163 #endif
 164
 165 #if defined(CONFIG_SPIFLASH)
 166 #define CONFIG_SYS_EXTRA_ENV_RELOC
 167 #define CONFIG_ENV_IS_IN_SPI_FLASH
 168 #define CONFIG_ENV_SPI_BUS              0
 169 #define CONFIG_ENV_SPI_CS               0
 170 #define CONFIG_ENV_SPI_MAX_HZ           10000000
 171 #define CONFIG_ENV_SPI_MODE             0
 172 #define CONFIG_ENV_SIZE                 0x2000          /* 8KB */
 173 #define CONFIG_ENV_OFFSET               0x100000        /* 1MB */
 174 #if defined(CONFIG_T1024RDB)
 175 #define CONFIG_ENV_SECT_SIZE            0x10000
 176 #elif defined(CONFIG_T1023RDB)
 177 #define CONFIG_ENV_SECT_SIZE            0x40000
 178 #endif
 179 #elif defined(CONFIG_SDCARD)
 180 #define CONFIG_SYS_EXTRA_ENV_RELOC
 181 #define CONFIG_ENV_IS_IN_MMC
 182 #define CONFIG_SYS_MMC_ENV_DEV          0
 183 #define CONFIG_ENV_SIZE                 0x2000
 184 #define CONFIG_ENV_OFFSET               (512 * 0x800)
 185 #elif defined(CONFIG_NAND)
 186 #define CONFIG_SYS_EXTRA_ENV_RELOC
 187 #define CONFIG_ENV_IS_IN_NAND
 188 #define CONFIG_ENV_SIZE                 0x2000
 189 #if defined(CONFIG_T1024RDB)
 190 #define CONFIG_ENV_OFFSET               (2 * CONFIG_SYS_NAND_BLOCK_SIZE)
 191 #elif defined(CONFIG_T1023RDB)
 192 #define CONFIG_ENV_OFFSET               (10 * CONFIG_SYS_NAND_BLOCK_SIZE)
 193 #endif
 194 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
 195 #define CONFIG_ENV_IS_IN_REMOTE
 196 #define CONFIG_ENV_ADDR         0xffe20000
 197 #define CONFIG_ENV_SIZE         0x2000
 198 #elif defined(CONFIG_ENV_IS_NOWHERE)
 199 #define CONFIG_ENV_SIZE         0x2000
 200 #else
 201 #define CONFIG_ENV_IS_IN_FLASH
 202 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 203 #define CONFIG_ENV_SIZE         0x2000
 204 #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
 205 #endif
 206
 207 #ifndef __ASSEMBLY__
 208 unsigned long get_board_sys_clk(void);
 209 unsigned long get_board_ddr_clk(void);
 210 #endif
 211
 212 #define CONFIG_SYS_CLK_FREQ     100000000
 213 #define CONFIG_DDR_CLK_FREQ     100000000
 214
 215 /*
 216  * These can be toggled for performance analysis, otherwise use default.
 217  */
 218 #define CONFIG_SYS_CACHE_STASHING
 219 #define CONFIG_BACKSIDE_L2_CACHE
 220 #define CONFIG_SYS_INIT_L2CSR0          L2CSR0_L2E
 221 #define CONFIG_BTB                      /* toggle branch predition */
 222 #define CONFIG_DDR_ECC
 223 #ifdef CONFIG_DDR_ECC
 224 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
 225 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
 226 #endif
 227
 228 #define CONFIG_SYS_MEMTEST_START        0x00200000 /* memtest works on */
 229 #define CONFIG_SYS_MEMTEST_END          0x00400000
 230 #define CONFIG_SYS_ALT_MEMTEST
 231 #define CONFIG_PANIC_HANG       /* do not reset board on panic */
 232
 233 /*
 234  *  Config the L3 Cache as L3 SRAM
 235  */
 236 #define CONFIG_SYS_INIT_L3_ADDR         0xFFFC0000
 237 #define CONFIG_SYS_L3_SIZE              (256 << 10)
 238 #define CONFIG_SPL_GD_ADDR              (CONFIG_SYS_INIT_L3_ADDR + 32 * 1024)
 239 #ifdef CONFIG_RAMBOOT_PBL
 240 #define CONFIG_ENV_ADDR                 (CONFIG_SPL_GD_ADDR + 4 * 1024)
 241 #endif
 242 #define CONFIG_SPL_RELOC_MALLOC_ADDR    (CONFIG_SPL_GD_ADDR + 12 * 1024)
 243 #define CONFIG_SPL_RELOC_MALLOC_SIZE    (30 << 10)
 244 #define CONFIG_SPL_RELOC_STACK          (CONFIG_SPL_GD_ADDR + 64 * 1024)
 245 #define CONFIG_SPL_RELOC_STACK_SIZE     (22 << 10)
 246
 247 #ifdef CONFIG_PHYS_64BIT
 248 #define CONFIG_SYS_DCSRBAR              0xf0000000
 249 #define CONFIG_SYS_DCSRBAR_PHYS         0xf00000000ull
 250 #endif
 251
 252 /* EEPROM */
 253 #define CONFIG_ID_EEPROM
 254 #define CONFIG_SYS_I2C_EEPROM_NXID
 255 #define CONFIG_SYS_EEPROM_BUS_NUM       0
 256 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x50
 257 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  2
 258 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
 259 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
 260
 261 /*
 262  * DDR Setup
 263  */
 264 #define CONFIG_VERY_BIG_RAM
 265 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 266 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 267 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 268 #define CONFIG_CHIP_SELECTS_PER_CTRL    (4 * CONFIG_DIMM_SLOTS_PER_CTLR)
 269 #define CONFIG_FSL_DDR_INTERACTIVE
 270 #if defined(CONFIG_T1024RDB)
 271 #define CONFIG_DDR_SPD
 272 #define CONFIG_SYS_FSL_DDR3
 273 #define CONFIG_SYS_SPD_BUS_NUM  0
 274 #define SPD_EEPROM_ADDRESS      0x51
 275 #define CONFIG_SYS_SDRAM_SIZE   4096    /* for fixed parameter use */
 276 #elif defined(CONFIG_T1023RDB)
 277 #define CONFIG_SYS_FSL_DDR4
 278 #define CONFIG_SYS_DDR_RAW_TIMING
 279 #define CONFIG_SYS_SDRAM_SIZE   2048
 280 #endif
 281
 282 /*
 283  * IFC Definitions
 284  */
 285 #define CONFIG_SYS_FLASH_BASE   0xe8000000
 286 #ifdef CONFIG_PHYS_64BIT
 287 #define CONFIG_SYS_FLASH_BASE_PHYS      (0xf00000000ull | CONFIG_SYS_FLASH_BASE)
 288 #else
 289 #define CONFIG_SYS_FLASH_BASE_PHYS      CONFIG_SYS_FLASH_BASE
 290 #endif
 291
 292 #define CONFIG_SYS_NOR0_CSPR_EXT        (0xf)
 293 #define CONFIG_SYS_NOR0_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
 294                                 CSPR_PORT_SIZE_16 | \
 295                                 CSPR_MSEL_NOR | \
 296                                 CSPR_V)
 297 #define CONFIG_SYS_NOR_AMASK    IFC_AMASK(128*1024*1024)
 298
 299 /* NOR Flash Timing Params */
 300 #if defined(CONFIG_T1024RDB)
 301 #define CONFIG_SYS_NOR_CSOR     CSOR_NAND_TRHZ_80
 302 #elif defined(CONFIG_T1023RDB)
 303 #define CONFIG_SYS_NOR_CSOR    (CSOR_NOR_ADM_SHIFT(0) | \
 304                                 CSOR_NAND_TRHZ_80 | CSOR_NOR_ADM_SHFT_MODE_EN)
 305 #endif
 306 #define CONFIG_SYS_NOR_FTIM0    (FTIM0_NOR_TACSE(0x4) | \
 307                                 FTIM0_NOR_TEADC(0x5) | \
 308                                 FTIM0_NOR_TEAHC(0x5))
 309 #define CONFIG_SYS_NOR_FTIM1    (FTIM1_NOR_TACO(0x35) | \
 310                                 FTIM1_NOR_TRAD_NOR(0x1A) |\
 311                                 FTIM1_NOR_TSEQRAD_NOR(0x13))
 312 #define CONFIG_SYS_NOR_FTIM2    (FTIM2_NOR_TCS(0x4) | \
 313                                 FTIM2_NOR_TCH(0x4) | \
 314                                 FTIM2_NOR_TWPH(0x0E) | \
 315                                 FTIM2_NOR_TWP(0x1c))
 316 #define CONFIG_SYS_NOR_FTIM3    0x0
 317
 318 #define CONFIG_SYS_FLASH_QUIET_TEST
 319 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
 320
 321 #define CONFIG_SYS_MAX_FLASH_BANKS      1       /* number of banks */
 322 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device */
 323 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 324 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 325
 326 #define CONFIG_SYS_FLASH_EMPTY_INFO
 327 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS}
 328
 329 #ifdef CONFIG_T1024RDB
 330 /* CPLD on IFC */
 331 #define CONFIG_SYS_CPLD_BASE            0xffdf0000
 332 #define CONFIG_SYS_CPLD_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_CPLD_BASE)
 333 #define CONFIG_SYS_CSPR2_EXT            (0xf)
 334 #define CONFIG_SYS_CSPR2                (CSPR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE) \
 335                                                 | CSPR_PORT_SIZE_8 \
 336                                                 | CSPR_MSEL_GPCM \
 337                                                 | CSPR_V)
 338 #define CONFIG_SYS_AMASK2               IFC_AMASK(64*1024)
 339 #define CONFIG_SYS_CSOR2                0x0
 340
 341 /* CPLD Timing parameters for IFC CS2 */
 342 #define CONFIG_SYS_CS2_FTIM0            (FTIM0_GPCM_TACSE(0x0e) | \
 343                                                 FTIM0_GPCM_TEADC(0x0e) | \
 344                                                 FTIM0_GPCM_TEAHC(0x0e))
 345 #define CONFIG_SYS_CS2_FTIM1            (FTIM1_GPCM_TACO(0x0e) | \
 346                                                 FTIM1_GPCM_TRAD(0x1f))
 347 #define CONFIG_SYS_CS2_FTIM2            (FTIM2_GPCM_TCS(0x0e) | \
 348                                                 FTIM2_GPCM_TCH(0x8) | \
 349                                                 FTIM2_GPCM_TWP(0x1f))
 350 #define CONFIG_SYS_CS2_FTIM3            0x0
 351 #endif
 352
 353 /* NAND Flash on IFC */
 354 #define CONFIG_NAND_FSL_IFC
 355 #define CONFIG_SYS_NAND_BASE            0xff800000
 356 #ifdef CONFIG_PHYS_64BIT
 357 #define CONFIG_SYS_NAND_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_NAND_BASE)
 358 #else
 359 #define CONFIG_SYS_NAND_BASE_PHYS       CONFIG_SYS_NAND_BASE
 360 #endif
 361 #define CONFIG_SYS_NAND_CSPR_EXT        (0xf)
 362 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 363                                 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
 364                                 | CSPR_MSEL_NAND        /* MSEL = NAND */ \
 365                                 | CSPR_V)
 366 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64*1024)
 367
 368 #if defined(CONFIG_T1024RDB)
 369 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 370                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 371                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
 372                                 | CSOR_NAND_RAL_3       /* RAL = 3Byes */ \
 373                                 | CSOR_NAND_PGS_4K      /* Page Size = 4K */ \
 374                                 | CSOR_NAND_SPRZ_224    /* Spare size = 224 */ \
 375                                 | CSOR_NAND_PB(64))     /*Pages Per Block = 64*/
 376 #define CONFIG_SYS_NAND_BLOCK_SIZE      (512 * 1024)
 377 #elif defined(CONFIG_T1023RDB)
 378 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 379                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 380                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
 381                                 | CSOR_NAND_RAL_3       /* RAL 3Bytes */ \
 382                                 | CSOR_NAND_PGS_2K      /* Page Size = 2K */ \
 383                                 | CSOR_NAND_SPRZ_128    /* Spare size = 128 */ \
 384                                 | CSOR_NAND_PB(64))     /*Pages Per Block = 64*/
 385 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128 * 1024)
 386 #endif
 387
 388 #define CONFIG_SYS_NAND_ONFI_DETECTION
 389 /* ONFI NAND Flash mode0 Timing Params */
 390 #define CONFIG_SYS_NAND_FTIM0           (FTIM0_NAND_TCCST(0x07) | \
 391                                         FTIM0_NAND_TWP(0x18)   | \
 392                                         FTIM0_NAND_TWCHT(0x07) | \
 393                                         FTIM0_NAND_TWH(0x0a))
 394 #define CONFIG_SYS_NAND_FTIM1           (FTIM1_NAND_TADLE(0x32) | \
 395                                         FTIM1_NAND_TWBE(0x39)  | \
 396                                         FTIM1_NAND_TRR(0x0e)   | \
 397                                         FTIM1_NAND_TRP(0x18))
 398 #define CONFIG_SYS_NAND_FTIM2           (FTIM2_NAND_TRAD(0x0f) | \
 399                                         FTIM2_NAND_TREH(0x0a) | \
 400                                         FTIM2_NAND_TWHRE(0x1e))
 401 #define CONFIG_SYS_NAND_FTIM3           0x0
 402
 403 #define CONFIG_SYS_NAND_DDR_LAW         11
 404 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
 405 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 406 #define CONFIG_CMD_NAND
 407
 408 #if defined(CONFIG_NAND)
 409 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NAND_CSPR_EXT
 410 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
 411 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
 412 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
 413 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
 414 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
 415 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
 416 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
 417 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 418 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR0_CSPR
 419 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
 420 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 421 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 422 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 423 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 424 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 425 #else
 426 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 427 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR0_CSPR
 428 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 429 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 430 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 431 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 432 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 433 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 434 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NAND_CSPR_EXT
 435 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NAND_CSPR
 436 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NAND_AMASK
 437 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NAND_CSOR
 438 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NAND_FTIM0
 439 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NAND_FTIM1
 440 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NAND_FTIM2
 441 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NAND_FTIM3
 442 #endif
 443
 444 #ifdef CONFIG_SPL_BUILD
 445 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SPL_TEXT_BASE
 446 #else
 447 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_TEXT_BASE
 448 #endif
 449
 450 #if defined(CONFIG_RAMBOOT_PBL)
 451 #define CONFIG_SYS_RAMBOOT
 452 #endif
 453
 454 #define CONFIG_BOARD_EARLY_INIT_R
 455 #define CONFIG_MISC_INIT_R
 456
 457 #define CONFIG_HWCONFIG
 458
 459 /* define to use L1 as initial stack */
 460 #define CONFIG_L1_INIT_RAM
 461 #define CONFIG_SYS_INIT_RAM_LOCK
 462 #define CONFIG_SYS_INIT_RAM_ADDR        0xfdd00000      /* Initial L1 address */
 463 #ifdef CONFIG_PHYS_64BIT
 464 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH      0xf
 465 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW       0xfe03c000
 466 /* The assembler doesn't like typecast */
 467 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
 468         ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
 469           CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
 470 #else
 471 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS   0xfe03c000 /* Initial L1 address */
 472 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0
 473 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS
 474 #endif
 475 #define CONFIG_SYS_INIT_RAM_SIZE                0x00004000
 476
 477 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - \
 478                                         GENERATED_GBL_DATA_SIZE)
 479 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 480
 481 #define CONFIG_SYS_MONITOR_LEN          (768 * 1024)
 482 #define CONFIG_SYS_MALLOC_LEN           (10 * 1024 * 1024)
 483
 484 /* Serial Port */
 485 #define CONFIG_CONS_INDEX       1
 486 #define CONFIG_SYS_NS16550_SERIAL
 487 #define CONFIG_SYS_NS16550_REG_SIZE     1
 488 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
 489
 490 #define CONFIG_SYS_BAUDRATE_TABLE       \
 491         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 492
 493 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
 494 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
 495 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
 496 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
 497 #define CONFIG_SYS_CONSOLE_IS_IN_ENV    /* determine from environment */
 498
 499 /* Video */
 500 #undef CONFIG_FSL_DIU_FB        /* RDB doesn't support DIU */
 501 #ifdef CONFIG_FSL_DIU_FB
 502 #define CONFIG_SYS_DIU_ADDR     (CONFIG_SYS_CCSRBAR + 0x180000)
 503 #define CONFIG_VIDEO
 504 #define CONFIG_CMD_BMP
 505 #define CONFIG_CFB_CONSOLE
 506 #define CONFIG_VIDEO_SW_CURSOR
 507 #define CONFIG_VGA_AS_SINGLE_DEVICE
 508 #define CONFIG_VIDEO_LOGO
 509 #define CONFIG_VIDEO_BMP_LOGO
 510 #define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS
 511 /*
 512  * With CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS, flash I/O is really slow, so
 513  * disable empty flash sector detection, which is I/O-intensive.
 514  */
 515 #undef CONFIG_SYS_FLASH_EMPTY_INFO
 516 #endif
 517
 518 /* I2C */
 519 #define CONFIG_SYS_I2C
 520 #define CONFIG_SYS_I2C_FSL              /* Use FSL common I2C driver */
 521 #define CONFIG_SYS_FSL_I2C_SPEED        50000   /* I2C speed in Hz */
 522 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 523 #define CONFIG_SYS_FSL_I2C2_SPEED       50000   /* I2C speed in Hz */
 524 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
 525 #define CONFIG_SYS_FSL_I2C_OFFSET       0x118000
 526 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x118100
 527
 528 #define I2C_PCA6408_BUS_NUM             1
 529 #define I2C_PCA6408_ADDR                0x20
 530
 531 /* I2C bus multiplexer */
 532 #define I2C_MUX_CH_DEFAULT      0x8
 533
 534 /*
 535  * RTC configuration
 536  */
 537 #define RTC
 538 #define CONFIG_RTC_DS1337       1
 539 #define CONFIG_SYS_I2C_RTC_ADDR 0x68
 540
 541 /*
 542  * eSPI - Enhanced SPI
 543  */
 544 #define CONFIG_SPI_FLASH_BAR
 545 #define CONFIG_SF_DEFAULT_SPEED 10000000
 546 #define CONFIG_SF_DEFAULT_MODE  0
 547
 548 /*
 549  * General PCIe
 550  * Memory space is mapped 1-1, but I/O space must start from 0.
 551  */
 552 #define CONFIG_PCI              /* Enable PCI/PCIE */
 553 #define CONFIG_PCIE1            /* PCIE controller 1 */
 554 #define CONFIG_PCIE2            /* PCIE controller 2 */
 555 #define CONFIG_PCIE3            /* PCIE controller 3 */
 556 #ifdef CONFIG_PPC_T1040
 557 #define CONFIG_PCIE4            /* PCIE controller 4 */
 558 #endif
 559 #define CONFIG_FSL_PCI_INIT     /* Use common FSL init code */
 560 #define CONFIG_SYS_PCI_64BIT    /* enable 64-bit PCI resources */
 561 #define CONFIG_PCI_INDIRECT_BRIDGE
 562
 563 #ifdef CONFIG_PCI
 564 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
 565 #ifdef CONFIG_PCIE1
 566 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
 567 #ifdef CONFIG_PHYS_64BIT
 568 #define CONFIG_SYS_PCIE1_MEM_BUS        0xe0000000
 569 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
 570 #else
 571 #define CONFIG_SYS_PCIE1_MEM_BUS        0x80000000
 572 #define CONFIG_SYS_PCIE1_MEM_PHYS       0x80000000
 573 #endif
 574 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x10000000      /* 256M */
 575 #define CONFIG_SYS_PCIE1_IO_VIRT        0xf8000000
 576 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 577 #ifdef CONFIG_PHYS_64BIT
 578 #define CONFIG_SYS_PCIE1_IO_PHYS        0xff8000000ull
 579 #else
 580 #define CONFIG_SYS_PCIE1_IO_PHYS        0xf8000000
 581 #endif
 582 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 583 #endif
 584
 585 /* controller 2, Slot 2, tgtid 2, Base address 201000 */
 586 #ifdef CONFIG_PCIE2
 587 #define CONFIG_SYS_PCIE2_MEM_VIRT       0x90000000
 588 #ifdef CONFIG_PHYS_64BIT
 589 #define CONFIG_SYS_PCIE2_MEM_BUS        0xe0000000
 590 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc10000000ull
 591 #else
 592 #define CONFIG_SYS_PCIE2_MEM_BUS        0x90000000
 593 #define CONFIG_SYS_PCIE2_MEM_PHYS       0x90000000
 594 #endif
 595 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x10000000      /* 256M */
 596 #define CONFIG_SYS_PCIE2_IO_VIRT        0xf8010000
 597 #define CONFIG_SYS_PCIE2_IO_BUS         0x00000000
 598 #ifdef CONFIG_PHYS_64BIT
 599 #define CONFIG_SYS_PCIE2_IO_PHYS        0xff8010000ull
 600 #else
 601 #define CONFIG_SYS_PCIE2_IO_PHYS        0xf8010000
 602 #endif
 603 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00010000      /* 64k */
 604 #endif
 605
 606 /* controller 3, Slot 1, tgtid 1, Base address 202000 */
 607 #ifdef CONFIG_PCIE3
 608 #define CONFIG_SYS_PCIE3_MEM_VIRT       0xa0000000
 609 #ifdef CONFIG_PHYS_64BIT
 610 #define CONFIG_SYS_PCIE3_MEM_BUS        0xe0000000
 611 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc20000000ull
 612 #else
 613 #define CONFIG_SYS_PCIE3_MEM_BUS        0xa0000000
 614 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xa0000000
 615 #endif
 616 #define CONFIG_SYS_PCIE3_MEM_SIZE       0x10000000      /* 256M */
 617 #define CONFIG_SYS_PCIE3_IO_VIRT        0xf8020000
 618 #define CONFIG_SYS_PCIE3_IO_BUS         0x00000000
 619 #ifdef CONFIG_PHYS_64BIT
 620 #define CONFIG_SYS_PCIE3_IO_PHYS        0xff8020000ull
 621 #else
 622 #define CONFIG_SYS_PCIE3_IO_PHYS        0xf8020000
 623 #endif
 624 #define CONFIG_SYS_PCIE3_IO_SIZE        0x00010000      /* 64k */
 625 #endif
 626
 627 /* controller 4, Base address 203000, to be removed */
 628 #ifdef CONFIG_PCIE4
 629 #define CONFIG_SYS_PCIE4_MEM_VIRT       0xb0000000
 630 #ifdef CONFIG_PHYS_64BIT
 631 #define CONFIG_SYS_PCIE4_MEM_BUS        0xe0000000
 632 #define CONFIG_SYS_PCIE4_MEM_PHYS       0xc30000000ull
 633 #else
 634 #define CONFIG_SYS_PCIE4_MEM_BUS        0xb0000000
 635 #define CONFIG_SYS_PCIE4_MEM_PHYS       0xb0000000
 636 #endif
 637 #define CONFIG_SYS_PCIE4_MEM_SIZE       0x10000000      /* 256M */
 638 #define CONFIG_SYS_PCIE4_IO_VIRT        0xf8030000
 639 #define CONFIG_SYS_PCIE4_IO_BUS         0x00000000
 640 #ifdef CONFIG_PHYS_64BIT
 641 #define CONFIG_SYS_PCIE4_IO_PHYS        0xff8030000ull
 642 #else
 643 #define CONFIG_SYS_PCIE4_IO_PHYS        0xf8030000
 644 #endif
 645 #define CONFIG_SYS_PCIE4_IO_SIZE        0x00010000      /* 64k */
 646 #endif
 647
 648 #define CONFIG_PCI_PNP                  /* do pci plug-and-play */
 649 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 650 #define CONFIG_DOS_PARTITION
 651 #endif  /* CONFIG_PCI */
 652
 653 /*
 654  * USB
 655  */
 656 #define CONFIG_HAS_FSL_DR_USB
 657
 658 #ifdef CONFIG_HAS_FSL_DR_USB
 659 #define CONFIG_USB_EHCI
 660 #define CONFIG_USB_EHCI_FSL
 661 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 662 #endif
 663
 664 /*
 665  * SDHC
 666  */
 667 #define CONFIG_MMC
 668 #ifdef CONFIG_MMC
 669 #define CONFIG_FSL_ESDHC
 670 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 671 #define CONFIG_GENERIC_MMC
 672 #define CONFIG_DOS_PARTITION
 673 #endif
 674
 675 /* Qman/Bman */
 676 #ifndef CONFIG_NOBQFMAN
 677 #define CONFIG_SYS_DPAA_QBMAN           /* Support Q/Bman */
 678 #define CONFIG_SYS_BMAN_NUM_PORTALS     10
 679 #define CONFIG_SYS_BMAN_MEM_BASE        0xf4000000
 680 #ifdef CONFIG_PHYS_64BIT
 681 #define CONFIG_SYS_BMAN_MEM_PHYS        0xff4000000ull
 682 #else
 683 #define CONFIG_SYS_BMAN_MEM_PHYS        CONFIG_SYS_BMAN_MEM_BASE
 684 #endif
 685 #define CONFIG_SYS_BMAN_MEM_SIZE        0x02000000
 686 #define CONFIG_SYS_BMAN_SP_CENA_SIZE    0x4000
 687 #define CONFIG_SYS_BMAN_SP_CINH_SIZE    0x1000
 688 #define CONFIG_SYS_BMAN_CENA_BASE       CONFIG_SYS_BMAN_MEM_BASE
 689 #define CONFIG_SYS_BMAN_CENA_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 690 #define CONFIG_SYS_BMAN_CINH_BASE       (CONFIG_SYS_BMAN_MEM_BASE + \
 691                                         CONFIG_SYS_BMAN_CENA_SIZE)
 692 #define CONFIG_SYS_BMAN_CINH_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 693 #define CONFIG_SYS_BMAN_SWP_ISDR_REG    0xE08
 694 #define CONFIG_SYS_QMAN_NUM_PORTALS     10
 695 #define CONFIG_SYS_QMAN_MEM_BASE        0xf6000000
 696 #ifdef CONFIG_PHYS_64BIT
 697 #define CONFIG_SYS_QMAN_MEM_PHYS        0xff6000000ull
 698 #else
 699 #define CONFIG_SYS_QMAN_MEM_PHYS        CONFIG_SYS_QMAN_MEM_BASE
 700 #endif
 701 #define CONFIG_SYS_QMAN_MEM_SIZE        0x02000000
 702 #define CONFIG_SYS_QMAN_SP_CENA_SIZE    0x4000
 703 #define CONFIG_SYS_QMAN_SP_CINH_SIZE    0x1000
 704 #define CONFIG_SYS_QMAN_CENA_BASE       CONFIG_SYS_QMAN_MEM_BASE
 705 #define CONFIG_SYS_QMAN_CENA_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 706 #define CONFIG_SYS_QMAN_CINH_BASE       (CONFIG_SYS_QMAN_MEM_BASE + \
 707                                         CONFIG_SYS_QMAN_CENA_SIZE)
 708 #define CONFIG_SYS_QMAN_CINH_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 709 #define CONFIG_SYS_QMAN_SWP_ISDR_REG    0xE08
 710
 711 #define CONFIG_SYS_DPAA_FMAN
 712
 713 #ifdef CONFIG_T1024RDB
 714 #define CONFIG_QE
 715 #define CONFIG_U_QE
 716 #endif
 717 /* Default address of microcode for the Linux FMan driver */
 718 #if defined(CONFIG_SPIFLASH)
 719 /*
 720  * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
 721  * env, so we got 0x110000.
 722  */
 723 #define CONFIG_SYS_QE_FW_IN_SPIFLASH
 724 #define CONFIG_SYS_FMAN_FW_ADDR 0x110000
 725 #define CONFIG_SYS_QE_FW_ADDR   0x130000
 726 #elif defined(CONFIG_SDCARD)
 727 /*
 728  * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
 729  * about 1MB (2048 blocks), Env is stored after the image, and the env size is
 730  * 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 2080(0x820).
 731  */
 732 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC
 733 #define CONFIG_SYS_FMAN_FW_ADDR         (512 * 0x820)
 734 #define CONFIG_SYS_QE_FW_ADDR           (512 * 0x920)
 735 #elif defined(CONFIG_NAND)
 736 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND
 737 #if defined(CONFIG_T1024RDB)
 738 #define CONFIG_SYS_FMAN_FW_ADDR         (3 * CONFIG_SYS_NAND_BLOCK_SIZE)
 739 #define CONFIG_SYS_QE_FW_ADDR           (4 * CONFIG_SYS_NAND_BLOCK_SIZE)
 740 #elif defined(CONFIG_T1023RDB)
 741 #define CONFIG_SYS_FMAN_FW_ADDR         (11 * CONFIG_SYS_NAND_BLOCK_SIZE)
 742 #define CONFIG_SYS_QE_FW_ADDR           (12 * CONFIG_SYS_NAND_BLOCK_SIZE)
 743 #endif
 744 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
 745 /*
 746  * Slave has no ucode locally, it can fetch this from remote. When implementing
 747  * in two corenet boards, slave's ucode could be stored in master's memory
 748  * space, the address can be mapped from slave TLB->slave LAW->
 749  * slave SRIO or PCIE outbound window->master inbound window->
 750  * master LAW->the ucode address in master's memory space.
 751  */
 752 #define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE
 753 #define CONFIG_SYS_FMAN_FW_ADDR         0xFFE00000
 754 #else
 755 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
 756 #define CONFIG_SYS_FMAN_FW_ADDR         0xEFF00000
 757 #define CONFIG_SYS_QE_FW_ADDR           0xEFE00000
 758 #endif
 759 #define CONFIG_SYS_QE_FMAN_FW_LENGTH    0x10000
 760 #define CONFIG_SYS_FDT_PAD              (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 761 #endif /* CONFIG_NOBQFMAN */
 762
 763 #ifdef CONFIG_SYS_DPAA_FMAN
 764 #define CONFIG_FMAN_ENET
 765 #define CONFIG_PHYLIB_10G
 766 #define CONFIG_PHY_REALTEK
 767 #define CONFIG_PHY_AQUANTIA
 768 #if defined(CONFIG_T1024RDB)
 769 #define RGMII_PHY1_ADDR         0x2
 770 #define RGMII_PHY2_ADDR         0x6
 771 #define SGMII_AQR_PHY_ADDR      0x2
 772 #define FM1_10GEC1_PHY_ADDR     0x1
 773 #elif defined(CONFIG_T1023RDB)
 774 #define RGMII_PHY1_ADDR         0x1
 775 #define SGMII_RTK_PHY_ADDR      0x3
 776 #define SGMII_AQR_PHY_ADDR      0x2
 777 #endif
 778 #endif
 779
 780 #ifdef CONFIG_FMAN_ENET
 781 #define CONFIG_MII              /* MII PHY management */
 782 #define CONFIG_ETHPRIME         "FM1@DTSEC4"
 783 #define CONFIG_PHY_GIGE         /* Include GbE speed/duplex detection */
 784 #endif
 785
 786 /*
 787  * Dynamic MTD Partition support with mtdparts
 788  */
 789 #ifndef CONFIG_SYS_NO_FLASH
 790 #define CONFIG_MTD_DEVICE
 791 #define CONFIG_MTD_PARTITIONS
 792 #define CONFIG_CMD_MTDPARTS
 793 #define CONFIG_FLASH_CFI_MTD
 794 #define MTDIDS_DEFAULT "nor0=fe8000000.nor,nand0=fff800000.flash," \
 795                         "spi0=spife110000.1"
 796 #define MTDPARTS_DEFAULT "mtdparts=fe8000000.nor:1m(uboot),5m(kernel)," \
 797                         "128k(dtb),96m(fs),-(user);fff800000.flash:1m(uboot)," \
 798                         "5m(kernel),128k(dtb),96m(fs),-(user);spife110000.0:" \
 799                         "1m(uboot),5m(kernel),128k(dtb),-(user)"
 800 #endif
 801
 802 /*
 803  * Environment
 804  */
 805 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
 806 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 807
 808 /*
 809  * Command line configuration.
 810  */
 811 #define CONFIG_CMD_DATE
 812 #define CONFIG_CMD_EEPROM
 813 #define CONFIG_CMD_ERRATA
 814 #define CONFIG_CMD_IRQ
 815 #define CONFIG_CMD_REGINFO
 816
 817 #ifdef CONFIG_PCI
 818 #define CONFIG_CMD_PCI
 819 #endif
 820
 821 /*
 822  * Miscellaneous configurable options
 823  */
 824 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 825 #define CONFIG_CMDLINE_EDITING                  /* Command-line editing */
 826 #define CONFIG_AUTO_COMPLETE                    /* add autocompletion support */
 827 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 828 #ifdef CONFIG_CMD_KGDB
 829 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size */
 830 #else
 831 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size */
 832 #endif
 833 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 834 #define CONFIG_SYS_MAXARGS      16              /* max number of command args */
 835 #define CONFIG_SYS_BARGSIZE  CONFIG_SYS_CBSIZE  /* Boot Argument Buffer Size */
 836
 837 /*
 838  * For booting Linux, the board info and command line data
 839  * have to be in the first 64 MB of memory, since this is
 840  * the maximum mapped by the Linux kernel during initialization.
 841  */
 842 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial map for Linux*/
 843 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 844
 845 #ifdef CONFIG_CMD_KGDB
 846 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 847 #endif
 848
 849 /*
 850  * Environment Configuration
 851  */
 852 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 853 #define CONFIG_BOOTFILE         "uImage"
 854 #define CONFIG_UBOOTPATH        u-boot.bin /* U-Boot image on TFTP server */
 855 #define CONFIG_LOADADDR         1000000 /* default location for tftp, bootm */
 856 #define CONFIG_BAUDRATE         115200
 857 #define __USB_PHY_TYPE          utmi
 858
 859 #ifdef CONFIG_PPC_T1024
 860 #define CONFIG_BOARDNAME t1024rdb
 861 #define BANK_INTLV cs0_cs1
 862 #else
 863 #define CONFIG_BOARDNAME t1023rdb
 864 #define BANK_INTLV  null
 865 #endif
 866
 867 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 868         "hwconfig=fsl_ddr:ctlr_intlv=cacheline,"                \
 869         "bank_intlv=" __stringify(BANK_INTLV) "\0"              \
 870         "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"  \
 871         "ramdiskfile=" __stringify(CONFIG_BOARDNAME) "/ramdisk.uboot\0" \
 872         "fdtfile=" __stringify(CONFIG_BOARDNAME) "/"            \
 873         __stringify(CONFIG_BOARDNAME) ".dtb\0"                  \
 874         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"             \
 875         "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"     \
 876         "bootargs=root=/dev/ram rw console=ttyS0,115200\0" \
 877         "netdev=eth0\0"                                         \
 878         "tftpflash=tftpboot $loadaddr $uboot && "               \
 879         "protect off $ubootaddr +$filesize && "                 \
 880         "erase $ubootaddr +$filesize && "                       \
 881         "cp.b $loadaddr $ubootaddr $filesize && "               \
 882         "protect on $ubootaddr +$filesize && "                  \
 883         "cmp.b $loadaddr $ubootaddr $filesize\0"                \
 884         "consoledev=ttyS0\0"                                    \
 885         "ramdiskaddr=2000000\0"                                 \
 886         "fdtaddr=1e00000\0"                                     \
 887         "bdev=sda3\0"
 888
 889 #define CONFIG_LINUX                                    \
 890         "setenv bootargs root=/dev/ram rw "             \
 891         "console=$consoledev,$baudrate $othbootargs;"   \
 892         "setenv ramdiskaddr 0x02000000;"                \
 893         "setenv fdtaddr 0x00c00000;"                    \
 894         "setenv loadaddr 0x1000000;"                    \
 895         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 896
 897 #define CONFIG_NFSBOOTCOMMAND                   \
 898         "setenv bootargs root=/dev/nfs rw "     \
 899         "nfsroot=$serverip:$rootpath "          \
 900         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 901         "console=$consoledev,$baudrate $othbootargs;"   \
 902         "tftp $loadaddr $bootfile;"             \
 903         "tftp $fdtaddr $fdtfile;"               \
 904         "bootm $loadaddr - $fdtaddr"
 905
 906 #define CONFIG_BOOTCOMMAND      CONFIG_LINUX
 907
 908 /* Hash command with SHA acceleration supported in hardware */
 909 #ifdef CONFIG_FSL_CAAM
 910 #define CONFIG_CMD_HASH
 911 #define CONFIG_SHA_HW_ACCEL
 912 #endif
 913
 914 #include <asm/fsl_secure_boot.h>
 915
 916 #endif  /* __T1024RDB_H */