Merge git://git.denx.de/u-boot-fsl-qoriq
[platform/kernel/u-boot.git] / include / configs / T102xRDB.h
1 /*
2  * Copyright 2014 Freescale Semiconductor, Inc.
3  *
4  * SPDX-License-Identifier:     GPL-2.0+
5  */
6
7 /*
8  * T1024/T1023 RDB board configuration file
9  */
10
11 #ifndef __T1024RDB_H
12 #define __T1024RDB_H
13
14 /* High Level Configuration Options */
15 #define CONFIG_SYS_BOOK3E_HV            /* Category E.HV supported */
16 #define CONFIG_MP                       /* support multiple processors */
17 #define CONFIG_ENABLE_36BIT_PHYS
18
19 #ifdef CONFIG_PHYS_64BIT
20 #define CONFIG_ADDR_MAP         1
21 #define CONFIG_SYS_NUM_ADDR_MAP 64      /* number of TLB1 entries */
22 #endif
23
24 #define CONFIG_SYS_FSL_CPC              /* Corenet Platform Cache */
25 #define CONFIG_SYS_NUM_CPC              CONFIG_SYS_NUM_DDR_CTLRS
26
27 #define CONFIG_ENV_OVERWRITE
28
29 /* support deep sleep */
30 #ifdef CONFIG_ARCH_T1024
31 #define CONFIG_DEEP_SLEEP
32 #endif
33
34 #ifdef CONFIG_RAMBOOT_PBL
35 #define CONFIG_SYS_FSL_PBL_PBI board/freescale/t102xrdb/t1024_pbi.cfg
36 #define CONFIG_SPL_FLUSH_IMAGE
37 #define CONFIG_SPL_TARGET               "u-boot-with-spl.bin"
38 #define CONFIG_SYS_TEXT_BASE            0x30001000
39 #define CONFIG_SPL_TEXT_BASE            0xFFFD8000
40 #define CONFIG_SPL_PAD_TO               0x40000
41 #define CONFIG_SPL_MAX_SIZE             0x28000
42 #define RESET_VECTOR_OFFSET             0x27FFC
43 #define BOOT_PAGE_OFFSET                0x27000
44 #ifdef CONFIG_SPL_BUILD
45 #define CONFIG_SPL_SKIP_RELOCATE
46 #define CONFIG_SPL_COMMON_INIT_DDR
47 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
48 #endif
49
50 #ifdef CONFIG_NAND
51 #define CONFIG_SYS_NAND_U_BOOT_SIZE     (768 << 10)
52 #define CONFIG_SYS_NAND_U_BOOT_DST      0x30000000
53 #define CONFIG_SYS_NAND_U_BOOT_START    0x30000000
54 #define CONFIG_SYS_NAND_U_BOOT_OFFS     (256 << 10)
55 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
56 #if defined(CONFIG_TARGET_T1024RDB)
57 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xrdb/t1024_nand_rcw.cfg
58 #elif defined(CONFIG_TARGET_T1023RDB)
59 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xrdb/t1023_nand_rcw.cfg
60 #endif
61 #define CONFIG_SPL_NAND_BOOT
62 #endif
63
64 #ifdef CONFIG_SPIFLASH
65 #define CONFIG_RESET_VECTOR_ADDRESS             0x30000FFC
66 #define CONFIG_SPL_SPI_FLASH_MINIMAL
67 #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE        (768 << 10)
68 #define CONFIG_SYS_SPI_FLASH_U_BOOT_DST         (0x30000000)
69 #define CONFIG_SYS_SPI_FLASH_U_BOOT_START       (0x30000000)
70 #define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS        (256 << 10)
71 #define CONFIG_SYS_LDSCRIPT             "arch/powerpc/cpu/mpc85xx/u-boot.lds"
72 #ifndef CONFIG_SPL_BUILD
73 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
74 #endif
75 #if defined(CONFIG_TARGET_T1024RDB)
76 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xrdb/t1024_spi_rcw.cfg
77 #elif defined(CONFIG_TARGET_T1023RDB)
78 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xrdb/t1023_spi_rcw.cfg
79 #endif
80 #define CONFIG_SPL_SPI_BOOT
81 #endif
82
83 #ifdef CONFIG_SDCARD
84 #define CONFIG_RESET_VECTOR_ADDRESS     0x30000FFC
85 #define CONFIG_SPL_MMC_MINIMAL
86 #define CONFIG_SYS_MMC_U_BOOT_SIZE      (768 << 10)
87 #define CONFIG_SYS_MMC_U_BOOT_DST       (0x30000000)
88 #define CONFIG_SYS_MMC_U_BOOT_START     (0x30000000)
89 #define CONFIG_SYS_MMC_U_BOOT_OFFS      (260 << 10)
90 #define CONFIG_SYS_LDSCRIPT             "arch/powerpc/cpu/mpc85xx/u-boot.lds"
91 #ifndef CONFIG_SPL_BUILD
92 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
93 #endif
94 #if defined(CONFIG_TARGET_T1024RDB)
95 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xrdb/t1024_sd_rcw.cfg
96 #elif defined(CONFIG_TARGET_T1023RDB)
97 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xrdb/t1023_sd_rcw.cfg
98 #endif
99 #define CONFIG_SPL_MMC_BOOT
100 #endif
101
102 #endif /* CONFIG_RAMBOOT_PBL */
103
104 #ifndef CONFIG_SYS_TEXT_BASE
105 #define CONFIG_SYS_TEXT_BASE    0xeff40000
106 #endif
107
108 #ifndef CONFIG_RESET_VECTOR_ADDRESS
109 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
110 #endif
111
112 #ifdef CONFIG_MTD_NOR_FLASH
113 #define CONFIG_FLASH_CFI_DRIVER
114 #define CONFIG_SYS_FLASH_CFI
115 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
116 #endif
117
118 /* PCIe Boot - Master */
119 #define CONFIG_SRIO_PCIE_BOOT_MASTER
120 /*
121  * for slave u-boot IMAGE instored in master memory space,
122  * PHYS must be aligned based on the SIZE
123  */
124 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff00000ull
125 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE     0x100000 /* 1M */
126 #ifdef CONFIG_PHYS_64BIT
127 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef200000ull
128 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff00000ull
129 #else
130 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xef200000
131 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0xfff00000
132 #endif
133 /*
134  * for slave UCODE and ENV instored in master memory space,
135  * PHYS must be aligned based on the SIZE
136  */
137 #ifdef CONFIG_PHYS_64BIT
138 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef100000ull
139 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS  0x3ffe00000ull
140 #else
141 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xef100000
142 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS  0xffe00000
143 #endif
144 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE    0x40000 /* 256K */
145 /* slave core release by master*/
146 #define CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET        0xe00e4
147 #define CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK      0x00000001 /* release core 0 */
148
149 /* PCIe Boot - Slave */
150 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
151 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR 0xFFE00000
152 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS \
153                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR)
154 /* Set 1M boot space for PCIe boot */
155 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_SYS_TEXT_BASE & 0xfff00000)
156 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS       \
157                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR)
158 #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc
159 #endif
160
161 #if defined(CONFIG_SPIFLASH)
162 #define CONFIG_SYS_EXTRA_ENV_RELOC
163 #define CONFIG_ENV_SPI_BUS              0
164 #define CONFIG_ENV_SPI_CS               0
165 #define CONFIG_ENV_SPI_MAX_HZ           10000000
166 #define CONFIG_ENV_SPI_MODE             0
167 #define CONFIG_ENV_SIZE                 0x2000          /* 8KB */
168 #define CONFIG_ENV_OFFSET               0x100000        /* 1MB */
169 #if defined(CONFIG_TARGET_T1024RDB)
170 #define CONFIG_ENV_SECT_SIZE            0x10000
171 #elif defined(CONFIG_TARGET_T1023RDB)
172 #define CONFIG_ENV_SECT_SIZE            0x40000
173 #endif
174 #elif defined(CONFIG_SDCARD)
175 #define CONFIG_SYS_EXTRA_ENV_RELOC
176 #define CONFIG_SYS_MMC_ENV_DEV          0
177 #define CONFIG_ENV_SIZE                 0x2000
178 #define CONFIG_ENV_OFFSET               (512 * 0x800)
179 #elif defined(CONFIG_NAND)
180 #define CONFIG_SYS_EXTRA_ENV_RELOC
181 #define CONFIG_ENV_SIZE                 0x2000
182 #if defined(CONFIG_TARGET_T1024RDB)
183 #define CONFIG_ENV_OFFSET               (2 * CONFIG_SYS_NAND_BLOCK_SIZE)
184 #elif defined(CONFIG_TARGET_T1023RDB)
185 #define CONFIG_ENV_OFFSET               (10 * CONFIG_SYS_NAND_BLOCK_SIZE)
186 #endif
187 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
188 #define CONFIG_ENV_ADDR         0xffe20000
189 #define CONFIG_ENV_SIZE         0x2000
190 #elif defined(CONFIG_ENV_IS_NOWHERE)
191 #define CONFIG_ENV_SIZE         0x2000
192 #else
193 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
194 #define CONFIG_ENV_SIZE         0x2000
195 #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
196 #endif
197
198 #ifndef __ASSEMBLY__
199 unsigned long get_board_sys_clk(void);
200 unsigned long get_board_ddr_clk(void);
201 #endif
202
203 #define CONFIG_SYS_CLK_FREQ     100000000
204 #define CONFIG_DDR_CLK_FREQ     100000000
205
206 /*
207  * These can be toggled for performance analysis, otherwise use default.
208  */
209 #define CONFIG_SYS_CACHE_STASHING
210 #define CONFIG_BACKSIDE_L2_CACHE
211 #define CONFIG_SYS_INIT_L2CSR0          L2CSR0_L2E
212 #define CONFIG_BTB                      /* toggle branch predition */
213 #define CONFIG_DDR_ECC
214 #ifdef CONFIG_DDR_ECC
215 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
216 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
217 #endif
218
219 #define CONFIG_SYS_MEMTEST_START        0x00200000 /* memtest works on */
220 #define CONFIG_SYS_MEMTEST_END          0x00400000
221 #define CONFIG_SYS_ALT_MEMTEST
222 #define CONFIG_PANIC_HANG       /* do not reset board on panic */
223
224 /*
225  *  Config the L3 Cache as L3 SRAM
226  */
227 #define CONFIG_SYS_INIT_L3_ADDR         0xFFFC0000
228 #define CONFIG_SYS_L3_SIZE              (256 << 10)
229 #define CONFIG_SPL_GD_ADDR              (CONFIG_SYS_INIT_L3_ADDR + 32 * 1024)
230 #ifdef CONFIG_RAMBOOT_PBL
231 #define CONFIG_ENV_ADDR                 (CONFIG_SPL_GD_ADDR + 4 * 1024)
232 #endif
233 #define CONFIG_SPL_RELOC_MALLOC_ADDR    (CONFIG_SPL_GD_ADDR + 12 * 1024)
234 #define CONFIG_SPL_RELOC_MALLOC_SIZE    (30 << 10)
235 #define CONFIG_SPL_RELOC_STACK          (CONFIG_SPL_GD_ADDR + 64 * 1024)
236 #define CONFIG_SPL_RELOC_STACK_SIZE     (22 << 10)
237
238 #ifdef CONFIG_PHYS_64BIT
239 #define CONFIG_SYS_DCSRBAR              0xf0000000
240 #define CONFIG_SYS_DCSRBAR_PHYS         0xf00000000ull
241 #endif
242
243 /* EEPROM */
244 #define CONFIG_ID_EEPROM
245 #define CONFIG_SYS_I2C_EEPROM_NXID
246 #define CONFIG_SYS_EEPROM_BUS_NUM       0
247 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x50
248 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  2
249 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
250 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
251
252 /*
253  * DDR Setup
254  */
255 #define CONFIG_VERY_BIG_RAM
256 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
257 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
258 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
259 #define CONFIG_CHIP_SELECTS_PER_CTRL    (4 * CONFIG_DIMM_SLOTS_PER_CTLR)
260 #define CONFIG_FSL_DDR_INTERACTIVE
261 #if defined(CONFIG_TARGET_T1024RDB)
262 #define CONFIG_DDR_SPD
263 #define CONFIG_SYS_SPD_BUS_NUM  0
264 #define SPD_EEPROM_ADDRESS      0x51
265 #define CONFIG_SYS_SDRAM_SIZE   4096    /* for fixed parameter use */
266 #elif defined(CONFIG_TARGET_T1023RDB)
267 #define CONFIG_SYS_DDR_RAW_TIMING
268 #define CONFIG_SYS_SDRAM_SIZE   2048
269 #endif
270
271 /*
272  * IFC Definitions
273  */
274 #define CONFIG_SYS_FLASH_BASE   0xe8000000
275 #ifdef CONFIG_PHYS_64BIT
276 #define CONFIG_SYS_FLASH_BASE_PHYS      (0xf00000000ull | CONFIG_SYS_FLASH_BASE)
277 #else
278 #define CONFIG_SYS_FLASH_BASE_PHYS      CONFIG_SYS_FLASH_BASE
279 #endif
280
281 #define CONFIG_SYS_NOR0_CSPR_EXT        (0xf)
282 #define CONFIG_SYS_NOR0_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
283                                 CSPR_PORT_SIZE_16 | \
284                                 CSPR_MSEL_NOR | \
285                                 CSPR_V)
286 #define CONFIG_SYS_NOR_AMASK    IFC_AMASK(128*1024*1024)
287
288 /* NOR Flash Timing Params */
289 #if defined(CONFIG_TARGET_T1024RDB)
290 #define CONFIG_SYS_NOR_CSOR     CSOR_NAND_TRHZ_80
291 #elif defined(CONFIG_TARGET_T1023RDB)
292 #define CONFIG_SYS_NOR_CSOR    (CSOR_NOR_ADM_SHIFT(0) | \
293                                 CSOR_NAND_TRHZ_80 | CSOR_NOR_ADM_SHFT_MODE_EN)
294 #endif
295 #define CONFIG_SYS_NOR_FTIM0    (FTIM0_NOR_TACSE(0x4) | \
296                                 FTIM0_NOR_TEADC(0x5) | \
297                                 FTIM0_NOR_TEAHC(0x5))
298 #define CONFIG_SYS_NOR_FTIM1    (FTIM1_NOR_TACO(0x35) | \
299                                 FTIM1_NOR_TRAD_NOR(0x1A) |\
300                                 FTIM1_NOR_TSEQRAD_NOR(0x13))
301 #define CONFIG_SYS_NOR_FTIM2    (FTIM2_NOR_TCS(0x4) | \
302                                 FTIM2_NOR_TCH(0x4) | \
303                                 FTIM2_NOR_TWPH(0x0E) | \
304                                 FTIM2_NOR_TWP(0x1c))
305 #define CONFIG_SYS_NOR_FTIM3    0x0
306
307 #define CONFIG_SYS_FLASH_QUIET_TEST
308 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
309
310 #define CONFIG_SYS_MAX_FLASH_BANKS      1       /* number of banks */
311 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device */
312 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
313 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
314
315 #define CONFIG_SYS_FLASH_EMPTY_INFO
316 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS}
317
318 #ifdef CONFIG_TARGET_T1024RDB
319 /* CPLD on IFC */
320 #define CONFIG_SYS_CPLD_BASE            0xffdf0000
321 #define CONFIG_SYS_CPLD_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_CPLD_BASE)
322 #define CONFIG_SYS_CSPR2_EXT            (0xf)
323 #define CONFIG_SYS_CSPR2                (CSPR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE) \
324                                                 | CSPR_PORT_SIZE_8 \
325                                                 | CSPR_MSEL_GPCM \
326                                                 | CSPR_V)
327 #define CONFIG_SYS_AMASK2               IFC_AMASK(64*1024)
328 #define CONFIG_SYS_CSOR2                0x0
329
330 /* CPLD Timing parameters for IFC CS2 */
331 #define CONFIG_SYS_CS2_FTIM0            (FTIM0_GPCM_TACSE(0x0e) | \
332                                                 FTIM0_GPCM_TEADC(0x0e) | \
333                                                 FTIM0_GPCM_TEAHC(0x0e))
334 #define CONFIG_SYS_CS2_FTIM1            (FTIM1_GPCM_TACO(0x0e) | \
335                                                 FTIM1_GPCM_TRAD(0x1f))
336 #define CONFIG_SYS_CS2_FTIM2            (FTIM2_GPCM_TCS(0x0e) | \
337                                                 FTIM2_GPCM_TCH(0x8) | \
338                                                 FTIM2_GPCM_TWP(0x1f))
339 #define CONFIG_SYS_CS2_FTIM3            0x0
340 #endif
341
342 /* NAND Flash on IFC */
343 #define CONFIG_NAND_FSL_IFC
344 #define CONFIG_SYS_NAND_BASE            0xff800000
345 #ifdef CONFIG_PHYS_64BIT
346 #define CONFIG_SYS_NAND_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_NAND_BASE)
347 #else
348 #define CONFIG_SYS_NAND_BASE_PHYS       CONFIG_SYS_NAND_BASE
349 #endif
350 #define CONFIG_SYS_NAND_CSPR_EXT        (0xf)
351 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
352                                 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
353                                 | CSPR_MSEL_NAND        /* MSEL = NAND */ \
354                                 | CSPR_V)
355 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64*1024)
356
357 #if defined(CONFIG_TARGET_T1024RDB)
358 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
359                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
360                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
361                                 | CSOR_NAND_RAL_3       /* RAL = 3Byes */ \
362                                 | CSOR_NAND_PGS_4K      /* Page Size = 4K */ \
363                                 | CSOR_NAND_SPRZ_224    /* Spare size = 224 */ \
364                                 | CSOR_NAND_PB(64))     /*Pages Per Block = 64*/
365 #define CONFIG_SYS_NAND_BLOCK_SIZE      (512 * 1024)
366 #elif defined(CONFIG_TARGET_T1023RDB)
367 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
368                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
369                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
370                                 | CSOR_NAND_RAL_3       /* RAL 3Bytes */ \
371                                 | CSOR_NAND_PGS_2K      /* Page Size = 2K */ \
372                                 | CSOR_NAND_SPRZ_128    /* Spare size = 128 */ \
373                                 | CSOR_NAND_PB(64))     /*Pages Per Block = 64*/
374 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128 * 1024)
375 #endif
376
377 #define CONFIG_SYS_NAND_ONFI_DETECTION
378 /* ONFI NAND Flash mode0 Timing Params */
379 #define CONFIG_SYS_NAND_FTIM0           (FTIM0_NAND_TCCST(0x07) | \
380                                         FTIM0_NAND_TWP(0x18)   | \
381                                         FTIM0_NAND_TWCHT(0x07) | \
382                                         FTIM0_NAND_TWH(0x0a))
383 #define CONFIG_SYS_NAND_FTIM1           (FTIM1_NAND_TADLE(0x32) | \
384                                         FTIM1_NAND_TWBE(0x39)  | \
385                                         FTIM1_NAND_TRR(0x0e)   | \
386                                         FTIM1_NAND_TRP(0x18))
387 #define CONFIG_SYS_NAND_FTIM2           (FTIM2_NAND_TRAD(0x0f) | \
388                                         FTIM2_NAND_TREH(0x0a) | \
389                                         FTIM2_NAND_TWHRE(0x1e))
390 #define CONFIG_SYS_NAND_FTIM3           0x0
391
392 #define CONFIG_SYS_NAND_DDR_LAW         11
393 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
394 #define CONFIG_SYS_MAX_NAND_DEVICE      1
395
396 #if defined(CONFIG_NAND)
397 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NAND_CSPR_EXT
398 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
399 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
400 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
401 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
402 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
403 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
404 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
405 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR0_CSPR_EXT
406 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR0_CSPR
407 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
408 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
409 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
410 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
411 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
412 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
413 #else
414 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR0_CSPR_EXT
415 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR0_CSPR
416 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
417 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
418 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
419 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
420 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
421 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
422 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NAND_CSPR_EXT
423 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NAND_CSPR
424 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NAND_AMASK
425 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NAND_CSOR
426 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NAND_FTIM0
427 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NAND_FTIM1
428 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NAND_FTIM2
429 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NAND_FTIM3
430 #endif
431
432 #ifdef CONFIG_SPL_BUILD
433 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SPL_TEXT_BASE
434 #else
435 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_TEXT_BASE
436 #endif
437
438 #if defined(CONFIG_RAMBOOT_PBL)
439 #define CONFIG_SYS_RAMBOOT
440 #endif
441
442 #define CONFIG_BOARD_EARLY_INIT_R
443 #define CONFIG_MISC_INIT_R
444
445 #define CONFIG_HWCONFIG
446
447 /* define to use L1 as initial stack */
448 #define CONFIG_L1_INIT_RAM
449 #define CONFIG_SYS_INIT_RAM_LOCK
450 #define CONFIG_SYS_INIT_RAM_ADDR        0xfdd00000      /* Initial L1 address */
451 #ifdef CONFIG_PHYS_64BIT
452 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH      0xf
453 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW       0xfe03c000
454 /* The assembler doesn't like typecast */
455 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
456         ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
457           CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
458 #else
459 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS   0xfe03c000 /* Initial L1 address */
460 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0
461 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS
462 #endif
463 #define CONFIG_SYS_INIT_RAM_SIZE                0x00004000
464
465 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - \
466                                         GENERATED_GBL_DATA_SIZE)
467 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
468
469 #define CONFIG_SYS_MONITOR_LEN          (768 * 1024)
470 #define CONFIG_SYS_MALLOC_LEN           (10 * 1024 * 1024)
471
472 /* Serial Port */
473 #define CONFIG_CONS_INDEX       1
474 #define CONFIG_SYS_NS16550_SERIAL
475 #define CONFIG_SYS_NS16550_REG_SIZE     1
476 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
477
478 #define CONFIG_SYS_BAUDRATE_TABLE       \
479         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
480
481 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
482 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
483 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
484 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
485
486 /* Video */
487 #undef CONFIG_FSL_DIU_FB        /* RDB doesn't support DIU */
488 #ifdef CONFIG_FSL_DIU_FB
489 #define CONFIG_SYS_DIU_ADDR     (CONFIG_SYS_CCSRBAR + 0x180000)
490 #define CONFIG_VIDEO_LOGO
491 #define CONFIG_VIDEO_BMP_LOGO
492 #define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS
493 /*
494  * With CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS, flash I/O is really slow, so
495  * disable empty flash sector detection, which is I/O-intensive.
496  */
497 #undef CONFIG_SYS_FLASH_EMPTY_INFO
498 #endif
499
500 /* I2C */
501 #define CONFIG_SYS_I2C
502 #define CONFIG_SYS_I2C_FSL              /* Use FSL common I2C driver */
503 #define CONFIG_SYS_FSL_I2C_SPEED        50000   /* I2C speed in Hz */
504 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
505 #define CONFIG_SYS_FSL_I2C2_SPEED       50000   /* I2C speed in Hz */
506 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
507 #define CONFIG_SYS_FSL_I2C_OFFSET       0x118000
508 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x118100
509
510 #define I2C_PCA6408_BUS_NUM             1
511 #define I2C_PCA6408_ADDR                0x20
512
513 /* I2C bus multiplexer */
514 #define I2C_MUX_CH_DEFAULT      0x8
515
516 /*
517  * RTC configuration
518  */
519 #define RTC
520 #define CONFIG_RTC_DS1337       1
521 #define CONFIG_SYS_I2C_RTC_ADDR 0x68
522
523 /*
524  * eSPI - Enhanced SPI
525  */
526 #define CONFIG_SPI_FLASH_BAR
527 #define CONFIG_SF_DEFAULT_SPEED 10000000
528 #define CONFIG_SF_DEFAULT_MODE  0
529
530 /*
531  * General PCIe
532  * Memory space is mapped 1-1, but I/O space must start from 0.
533  */
534 #define CONFIG_PCIE1            /* PCIE controller 1 */
535 #define CONFIG_PCIE2            /* PCIE controller 2 */
536 #define CONFIG_PCIE3            /* PCIE controller 3 */
537 #ifdef CONFIG_ARCH_T1040
538 #define CONFIG_PCIE4            /* PCIE controller 4 */
539 #endif
540 #define CONFIG_FSL_PCI_INIT     /* Use common FSL init code */
541 #define CONFIG_SYS_PCI_64BIT    /* enable 64-bit PCI resources */
542 #define CONFIG_PCI_INDIRECT_BRIDGE
543
544 #ifdef CONFIG_PCI
545 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
546 #ifdef CONFIG_PCIE1
547 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
548 #ifdef CONFIG_PHYS_64BIT
549 #define CONFIG_SYS_PCIE1_MEM_BUS        0xe0000000
550 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
551 #else
552 #define CONFIG_SYS_PCIE1_MEM_BUS        0x80000000
553 #define CONFIG_SYS_PCIE1_MEM_PHYS       0x80000000
554 #endif
555 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x10000000      /* 256M */
556 #define CONFIG_SYS_PCIE1_IO_VIRT        0xf8000000
557 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
558 #ifdef CONFIG_PHYS_64BIT
559 #define CONFIG_SYS_PCIE1_IO_PHYS        0xff8000000ull
560 #else
561 #define CONFIG_SYS_PCIE1_IO_PHYS        0xf8000000
562 #endif
563 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
564 #endif
565
566 /* controller 2, Slot 2, tgtid 2, Base address 201000 */
567 #ifdef CONFIG_PCIE2
568 #define CONFIG_SYS_PCIE2_MEM_VIRT       0x90000000
569 #ifdef CONFIG_PHYS_64BIT
570 #define CONFIG_SYS_PCIE2_MEM_BUS        0xe0000000
571 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc10000000ull
572 #else
573 #define CONFIG_SYS_PCIE2_MEM_BUS        0x90000000
574 #define CONFIG_SYS_PCIE2_MEM_PHYS       0x90000000
575 #endif
576 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x10000000      /* 256M */
577 #define CONFIG_SYS_PCIE2_IO_VIRT        0xf8010000
578 #define CONFIG_SYS_PCIE2_IO_BUS         0x00000000
579 #ifdef CONFIG_PHYS_64BIT
580 #define CONFIG_SYS_PCIE2_IO_PHYS        0xff8010000ull
581 #else
582 #define CONFIG_SYS_PCIE2_IO_PHYS        0xf8010000
583 #endif
584 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00010000      /* 64k */
585 #endif
586
587 /* controller 3, Slot 1, tgtid 1, Base address 202000 */
588 #ifdef CONFIG_PCIE3
589 #define CONFIG_SYS_PCIE3_MEM_VIRT       0xa0000000
590 #ifdef CONFIG_PHYS_64BIT
591 #define CONFIG_SYS_PCIE3_MEM_BUS        0xe0000000
592 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc20000000ull
593 #else
594 #define CONFIG_SYS_PCIE3_MEM_BUS        0xa0000000
595 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xa0000000
596 #endif
597 #define CONFIG_SYS_PCIE3_MEM_SIZE       0x10000000      /* 256M */
598 #define CONFIG_SYS_PCIE3_IO_VIRT        0xf8020000
599 #define CONFIG_SYS_PCIE3_IO_BUS         0x00000000
600 #ifdef CONFIG_PHYS_64BIT
601 #define CONFIG_SYS_PCIE3_IO_PHYS        0xff8020000ull
602 #else
603 #define CONFIG_SYS_PCIE3_IO_PHYS        0xf8020000
604 #endif
605 #define CONFIG_SYS_PCIE3_IO_SIZE        0x00010000      /* 64k */
606 #endif
607
608 /* controller 4, Base address 203000, to be removed */
609 #ifdef CONFIG_PCIE4
610 #define CONFIG_SYS_PCIE4_MEM_VIRT       0xb0000000
611 #ifdef CONFIG_PHYS_64BIT
612 #define CONFIG_SYS_PCIE4_MEM_BUS        0xe0000000
613 #define CONFIG_SYS_PCIE4_MEM_PHYS       0xc30000000ull
614 #else
615 #define CONFIG_SYS_PCIE4_MEM_BUS        0xb0000000
616 #define CONFIG_SYS_PCIE4_MEM_PHYS       0xb0000000
617 #endif
618 #define CONFIG_SYS_PCIE4_MEM_SIZE       0x10000000      /* 256M */
619 #define CONFIG_SYS_PCIE4_IO_VIRT        0xf8030000
620 #define CONFIG_SYS_PCIE4_IO_BUS         0x00000000
621 #ifdef CONFIG_PHYS_64BIT
622 #define CONFIG_SYS_PCIE4_IO_PHYS        0xff8030000ull
623 #else
624 #define CONFIG_SYS_PCIE4_IO_PHYS        0xf8030000
625 #endif
626 #define CONFIG_SYS_PCIE4_IO_SIZE        0x00010000      /* 64k */
627 #endif
628
629 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
630 #endif  /* CONFIG_PCI */
631
632 /*
633  * USB
634  */
635 #define CONFIG_HAS_FSL_DR_USB
636
637 #ifdef CONFIG_HAS_FSL_DR_USB
638 #define CONFIG_USB_EHCI_FSL
639 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
640 #endif
641
642 /*
643  * SDHC
644  */
645 #ifdef CONFIG_MMC
646 #define CONFIG_FSL_ESDHC
647 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
648 #endif
649
650 /* Qman/Bman */
651 #ifndef CONFIG_NOBQFMAN
652 #define CONFIG_SYS_DPAA_QBMAN           /* Support Q/Bman */
653 #define CONFIG_SYS_BMAN_NUM_PORTALS     10
654 #define CONFIG_SYS_BMAN_MEM_BASE        0xf4000000
655 #ifdef CONFIG_PHYS_64BIT
656 #define CONFIG_SYS_BMAN_MEM_PHYS        0xff4000000ull
657 #else
658 #define CONFIG_SYS_BMAN_MEM_PHYS        CONFIG_SYS_BMAN_MEM_BASE
659 #endif
660 #define CONFIG_SYS_BMAN_MEM_SIZE        0x02000000
661 #define CONFIG_SYS_BMAN_SP_CENA_SIZE    0x4000
662 #define CONFIG_SYS_BMAN_SP_CINH_SIZE    0x1000
663 #define CONFIG_SYS_BMAN_CENA_BASE       CONFIG_SYS_BMAN_MEM_BASE
664 #define CONFIG_SYS_BMAN_CENA_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
665 #define CONFIG_SYS_BMAN_CINH_BASE       (CONFIG_SYS_BMAN_MEM_BASE + \
666                                         CONFIG_SYS_BMAN_CENA_SIZE)
667 #define CONFIG_SYS_BMAN_CINH_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
668 #define CONFIG_SYS_BMAN_SWP_ISDR_REG    0xE08
669 #define CONFIG_SYS_QMAN_NUM_PORTALS     10
670 #define CONFIG_SYS_QMAN_MEM_BASE        0xf6000000
671 #ifdef CONFIG_PHYS_64BIT
672 #define CONFIG_SYS_QMAN_MEM_PHYS        0xff6000000ull
673 #else
674 #define CONFIG_SYS_QMAN_MEM_PHYS        CONFIG_SYS_QMAN_MEM_BASE
675 #endif
676 #define CONFIG_SYS_QMAN_MEM_SIZE        0x02000000
677 #define CONFIG_SYS_QMAN_SP_CENA_SIZE    0x4000
678 #define CONFIG_SYS_QMAN_SP_CINH_SIZE    0x1000
679 #define CONFIG_SYS_QMAN_CENA_BASE       CONFIG_SYS_QMAN_MEM_BASE
680 #define CONFIG_SYS_QMAN_CENA_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
681 #define CONFIG_SYS_QMAN_CINH_BASE       (CONFIG_SYS_QMAN_MEM_BASE + \
682                                         CONFIG_SYS_QMAN_CENA_SIZE)
683 #define CONFIG_SYS_QMAN_CINH_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
684 #define CONFIG_SYS_QMAN_SWP_ISDR_REG    0xE08
685
686 #define CONFIG_SYS_DPAA_FMAN
687
688 #ifdef CONFIG_TARGET_T1024RDB
689 #define CONFIG_QE
690 #define CONFIG_U_QE
691 #endif
692 /* Default address of microcode for the Linux FMan driver */
693 #if defined(CONFIG_SPIFLASH)
694 /*
695  * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
696  * env, so we got 0x110000.
697  */
698 #define CONFIG_SYS_QE_FW_IN_SPIFLASH
699 #define CONFIG_SYS_FMAN_FW_ADDR 0x110000
700 #define CONFIG_SYS_QE_FW_ADDR   0x130000
701 #elif defined(CONFIG_SDCARD)
702 /*
703  * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
704  * about 1MB (2048 blocks), Env is stored after the image, and the env size is
705  * 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 2080(0x820).
706  */
707 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC
708 #define CONFIG_SYS_FMAN_FW_ADDR         (512 * 0x820)
709 #define CONFIG_SYS_QE_FW_ADDR           (512 * 0x920)
710 #elif defined(CONFIG_NAND)
711 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND
712 #if defined(CONFIG_TARGET_T1024RDB)
713 #define CONFIG_SYS_FMAN_FW_ADDR         (3 * CONFIG_SYS_NAND_BLOCK_SIZE)
714 #define CONFIG_SYS_QE_FW_ADDR           (4 * CONFIG_SYS_NAND_BLOCK_SIZE)
715 #elif defined(CONFIG_TARGET_T1023RDB)
716 #define CONFIG_SYS_FMAN_FW_ADDR         (11 * CONFIG_SYS_NAND_BLOCK_SIZE)
717 #define CONFIG_SYS_QE_FW_ADDR           (12 * CONFIG_SYS_NAND_BLOCK_SIZE)
718 #endif
719 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
720 /*
721  * Slave has no ucode locally, it can fetch this from remote. When implementing
722  * in two corenet boards, slave's ucode could be stored in master's memory
723  * space, the address can be mapped from slave TLB->slave LAW->
724  * slave SRIO or PCIE outbound window->master inbound window->
725  * master LAW->the ucode address in master's memory space.
726  */
727 #define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE
728 #define CONFIG_SYS_FMAN_FW_ADDR         0xFFE00000
729 #else
730 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
731 #define CONFIG_SYS_FMAN_FW_ADDR         0xEFF00000
732 #define CONFIG_SYS_QE_FW_ADDR           0xEFE00000
733 #endif
734 #define CONFIG_SYS_QE_FMAN_FW_LENGTH    0x10000
735 #define CONFIG_SYS_FDT_PAD              (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
736 #endif /* CONFIG_NOBQFMAN */
737
738 #ifdef CONFIG_SYS_DPAA_FMAN
739 #define CONFIG_FMAN_ENET
740 #define CONFIG_PHYLIB_10G
741 #define CONFIG_PHY_REALTEK
742 #define CONFIG_PHY_AQUANTIA
743 #if defined(CONFIG_TARGET_T1024RDB)
744 #define RGMII_PHY1_ADDR         0x2
745 #define RGMII_PHY2_ADDR         0x6
746 #define SGMII_AQR_PHY_ADDR      0x2
747 #define FM1_10GEC1_PHY_ADDR     0x1
748 #elif defined(CONFIG_TARGET_T1023RDB)
749 #define RGMII_PHY1_ADDR         0x1
750 #define SGMII_RTK_PHY_ADDR      0x3
751 #define SGMII_AQR_PHY_ADDR      0x2
752 #endif
753 #endif
754
755 #ifdef CONFIG_FMAN_ENET
756 #define CONFIG_MII              /* MII PHY management */
757 #define CONFIG_ETHPRIME         "FM1@DTSEC4"
758 #endif
759
760 /*
761  * Dynamic MTD Partition support with mtdparts
762  */
763 #ifdef CONFIG_MTD_NOR_FLASH
764 #define CONFIG_MTD_DEVICE
765 #define CONFIG_MTD_PARTITIONS
766 #define CONFIG_FLASH_CFI_MTD
767 #define MTDIDS_DEFAULT "nor0=fe8000000.nor,nand0=fff800000.flash," \
768                         "spi0=spife110000.1"
769 #define MTDPARTS_DEFAULT "mtdparts=fe8000000.nor:1m(uboot),5m(kernel)," \
770                         "128k(dtb),96m(fs),-(user);fff800000.flash:1m(uboot)," \
771                         "5m(kernel),128k(dtb),96m(fs),-(user);spife110000.0:" \
772                         "1m(uboot),5m(kernel),128k(dtb),-(user)"
773 #endif
774
775 /*
776  * Environment
777  */
778 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
779 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
780
781 /*
782  * Command line configuration.
783  */
784 #define CONFIG_CMD_REGINFO
785
786 #ifdef CONFIG_PCI
787 #define CONFIG_CMD_PCI
788 #endif
789
790 /*
791  * Miscellaneous configurable options
792  */
793 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
794 #define CONFIG_CMDLINE_EDITING                  /* Command-line editing */
795 #define CONFIG_AUTO_COMPLETE                    /* add autocompletion support */
796 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
797 #ifdef CONFIG_CMD_KGDB
798 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size */
799 #else
800 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size */
801 #endif
802 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
803 #define CONFIG_SYS_MAXARGS      16              /* max number of command args */
804 #define CONFIG_SYS_BARGSIZE  CONFIG_SYS_CBSIZE  /* Boot Argument Buffer Size */
805
806 /*
807  * For booting Linux, the board info and command line data
808  * have to be in the first 64 MB of memory, since this is
809  * the maximum mapped by the Linux kernel during initialization.
810  */
811 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial map for Linux*/
812 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
813
814 #ifdef CONFIG_CMD_KGDB
815 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
816 #endif
817
818 /*
819  * Environment Configuration
820  */
821 #define CONFIG_ROOTPATH         "/opt/nfsroot"
822 #define CONFIG_BOOTFILE         "uImage"
823 #define CONFIG_UBOOTPATH        u-boot.bin /* U-Boot image on TFTP server */
824 #define CONFIG_LOADADDR         1000000 /* default location for tftp, bootm */
825 #define __USB_PHY_TYPE          utmi
826
827 #ifdef CONFIG_ARCH_T1024
828 #define CONFIG_BOARDNAME t1024rdb
829 #define BANK_INTLV cs0_cs1
830 #else
831 #define CONFIG_BOARDNAME t1023rdb
832 #define BANK_INTLV  null
833 #endif
834
835 #define CONFIG_EXTRA_ENV_SETTINGS                               \
836         "hwconfig=fsl_ddr:ctlr_intlv=cacheline,"                \
837         "bank_intlv=" __stringify(BANK_INTLV) "\0"              \
838         "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"  \
839         "ramdiskfile=" __stringify(CONFIG_BOARDNAME) "/ramdisk.uboot\0" \
840         "fdtfile=" __stringify(CONFIG_BOARDNAME) "/"            \
841         __stringify(CONFIG_BOARDNAME) ".dtb\0"                  \
842         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"             \
843         "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"     \
844         "bootargs=root=/dev/ram rw console=ttyS0,115200\0" \
845         "netdev=eth0\0"                                         \
846         "tftpflash=tftpboot $loadaddr $uboot && "               \
847         "protect off $ubootaddr +$filesize && "                 \
848         "erase $ubootaddr +$filesize && "                       \
849         "cp.b $loadaddr $ubootaddr $filesize && "               \
850         "protect on $ubootaddr +$filesize && "                  \
851         "cmp.b $loadaddr $ubootaddr $filesize\0"                \
852         "consoledev=ttyS0\0"                                    \
853         "ramdiskaddr=2000000\0"                                 \
854         "fdtaddr=1e00000\0"                                     \
855         "bdev=sda3\0"
856
857 #define CONFIG_LINUX                                    \
858         "setenv bootargs root=/dev/ram rw "             \
859         "console=$consoledev,$baudrate $othbootargs;"   \
860         "setenv ramdiskaddr 0x02000000;"                \
861         "setenv fdtaddr 0x00c00000;"                    \
862         "setenv loadaddr 0x1000000;"                    \
863         "bootm $loadaddr $ramdiskaddr $fdtaddr"
864
865 #define CONFIG_NFSBOOTCOMMAND                   \
866         "setenv bootargs root=/dev/nfs rw "     \
867         "nfsroot=$serverip:$rootpath "          \
868         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
869         "console=$consoledev,$baudrate $othbootargs;"   \
870         "tftp $loadaddr $bootfile;"             \
871         "tftp $fdtaddr $fdtfile;"               \
872         "bootm $loadaddr - $fdtaddr"
873
874 #define CONFIG_BOOTCOMMAND      CONFIG_LINUX
875
876 #include <asm/fsl_secure_boot.h>
877
878 #endif  /* __T1024RDB_H */