include/configs/T102xRDB.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright 2014 Freescale Semiconductor, Inc.
   4  * Copyright 2020 NXP
   5  */
   6
   7 /*
   8  * T1024/T1023 RDB board configuration file
   9  */
  10
  11 #ifndef __T1024RDB_H
  12 #define __T1024RDB_H
  13
  14 #include <linux/stringify.h>
  15
  16 /* High Level Configuration Options */
  17 #define CONFIG_SYS_BOOK3E_HV            /* Category E.HV supported */
  18 #define CONFIG_ENABLE_36BIT_PHYS
  19
  20 #define CONFIG_SYS_FSL_CPC              /* Corenet Platform Cache */
  21 #define CONFIG_SYS_NUM_CPC              CONFIG_SYS_NUM_DDR_CTLRS
  22
  23 #define CONFIG_ENV_OVERWRITE
  24
  25 /* support deep sleep */
  26 #ifdef CONFIG_ARCH_T1024
  27 #define CONFIG_DEEP_SLEEP
  28 #endif
  29
  30 #ifdef CONFIG_RAMBOOT_PBL
  31 #define CONFIG_SYS_FSL_PBL_PBI board/freescale/t102xrdb/t1024_pbi.cfg
  32 #define CONFIG_SPL_FLUSH_IMAGE
  33 #define CONFIG_SPL_PAD_TO               0x40000
  34 #define CONFIG_SPL_MAX_SIZE             0x28000
  35 #define RESET_VECTOR_OFFSET             0x27FFC
  36 #define BOOT_PAGE_OFFSET                0x27000
  37 #ifdef CONFIG_SPL_BUILD
  38 #define CONFIG_SPL_SKIP_RELOCATE
  39 #define CONFIG_SPL_COMMON_INIT_DDR
  40 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
  41 #endif
  42
  43 #ifdef CONFIG_MTD_RAW_NAND
  44 #define CONFIG_SYS_NAND_U_BOOT_SIZE     (768 << 10)
  45 #define CONFIG_SYS_NAND_U_BOOT_DST      0x30000000
  46 #define CONFIG_SYS_NAND_U_BOOT_START    0x30000000
  47 #define CONFIG_SYS_NAND_U_BOOT_OFFS     (256 << 10)
  48 #if defined(CONFIG_TARGET_T1024RDB)
  49 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xrdb/t1024_nand_rcw.cfg
  50 #elif defined(CONFIG_TARGET_T1023RDB)
  51 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xrdb/t1023_nand_rcw.cfg
  52 #endif
  53 #endif
  54
  55 #ifdef CONFIG_SPIFLASH
  56 #define CONFIG_RESET_VECTOR_ADDRESS             0x30000FFC
  57 #define CONFIG_SPL_SPI_FLASH_MINIMAL
  58 #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE        (768 << 10)
  59 #define CONFIG_SYS_SPI_FLASH_U_BOOT_DST         (0x30000000)
  60 #define CONFIG_SYS_SPI_FLASH_U_BOOT_START       (0x30000000)
  61 #define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS        (256 << 10)
  62 #ifndef CONFIG_SPL_BUILD
  63 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
  64 #endif
  65 #if defined(CONFIG_TARGET_T1024RDB)
  66 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xrdb/t1024_spi_rcw.cfg
  67 #elif defined(CONFIG_TARGET_T1023RDB)
  68 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xrdb/t1023_spi_rcw.cfg
  69 #endif
  70 #endif
  71
  72 #ifdef CONFIG_SDCARD
  73 #define CONFIG_RESET_VECTOR_ADDRESS     0x30000FFC
  74 #define CONFIG_SYS_MMC_U_BOOT_SIZE      (768 << 10)
  75 #define CONFIG_SYS_MMC_U_BOOT_DST       (0x30000000)
  76 #define CONFIG_SYS_MMC_U_BOOT_START     (0x30000000)
  77 #define CONFIG_SYS_MMC_U_BOOT_OFFS      (260 << 10)
  78 #ifndef CONFIG_SPL_BUILD
  79 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
  80 #endif
  81 #if defined(CONFIG_TARGET_T1024RDB)
  82 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xrdb/t1024_sd_rcw.cfg
  83 #elif defined(CONFIG_TARGET_T1023RDB)
  84 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xrdb/t1023_sd_rcw.cfg
  85 #endif
  86 #endif
  87
  88 #endif /* CONFIG_RAMBOOT_PBL */
  89
  90 #ifndef CONFIG_RESET_VECTOR_ADDRESS
  91 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
  92 #endif
  93
  94 /* PCIe Boot - Master */
  95 #define CONFIG_SRIO_PCIE_BOOT_MASTER
  96 /*
  97  * for slave u-boot IMAGE instored in master memory space,
  98  * PHYS must be aligned based on the SIZE
  99  */
 100 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff00000ull
 101 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE     0x100000 /* 1M */
 102 #ifdef CONFIG_PHYS_64BIT
 103 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef200000ull
 104 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff00000ull
 105 #else
 106 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xef200000
 107 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0xfff00000
 108 #endif
 109 /*
 110  * for slave UCODE and ENV instored in master memory space,
 111  * PHYS must be aligned based on the SIZE
 112  */
 113 #ifdef CONFIG_PHYS_64BIT
 114 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef100000ull
 115 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS  0x3ffe00000ull
 116 #else
 117 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xef100000
 118 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS  0xffe00000
 119 #endif
 120 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE    0x40000 /* 256K */
 121 /* slave core release by master*/
 122 #define CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET        0xe00e4
 123 #define CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK      0x00000001 /* release core 0 */
 124
 125 /* PCIe Boot - Slave */
 126 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
 127 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR 0xFFE00000
 128 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS \
 129                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR)
 130 /* Set 1M boot space for PCIe boot */
 131 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_SYS_TEXT_BASE & 0xfff00000)
 132 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS       \
 133                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR)
 134 #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc
 135 #endif
 136
 137 #if defined(CONFIG_SPIFLASH)
 138 #elif defined(CONFIG_SDCARD)
 139 #define CONFIG_SYS_MMC_ENV_DEV          0
 140 #endif
 141
 142 #ifndef __ASSEMBLY__
 143 unsigned long get_board_sys_clk(void);
 144 unsigned long get_board_ddr_clk(void);
 145 #endif
 146
 147 #define CONFIG_SYS_CLK_FREQ     100000000
 148 #define CONFIG_DDR_CLK_FREQ     100000000
 149
 150 /*
 151  * These can be toggled for performance analysis, otherwise use default.
 152  */
 153 #define CONFIG_SYS_CACHE_STASHING
 154 #define CONFIG_BACKSIDE_L2_CACHE
 155 #define CONFIG_SYS_INIT_L2CSR0          L2CSR0_L2E
 156 #define CONFIG_BTB                      /* toggle branch predition */
 157 #define CONFIG_DDR_ECC
 158 #ifdef CONFIG_DDR_ECC
 159 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
 160 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
 161 #endif
 162
 163 /*
 164  *  Config the L3 Cache as L3 SRAM
 165  */
 166 #define CONFIG_SYS_INIT_L3_ADDR         0xFFFC0000
 167 #define CONFIG_SYS_L3_SIZE              (256 << 10)
 168 #define CONFIG_SPL_GD_ADDR              (CONFIG_SYS_INIT_L3_ADDR + 32 * 1024)
 169 #define SPL_ENV_ADDR                    (CONFIG_SPL_GD_ADDR + 4 * 1024)
 170 #define CONFIG_SPL_RELOC_MALLOC_ADDR    (CONFIG_SPL_GD_ADDR + 12 * 1024)
 171 #define CONFIG_SPL_RELOC_MALLOC_SIZE    (30 << 10)
 172 #define CONFIG_SPL_RELOC_STACK          (CONFIG_SPL_GD_ADDR + 64 * 1024)
 173
 174 #ifdef CONFIG_PHYS_64BIT
 175 #define CONFIG_SYS_DCSRBAR              0xf0000000
 176 #define CONFIG_SYS_DCSRBAR_PHYS         0xf00000000ull
 177 #endif
 178
 179 /* EEPROM */
 180 #define CONFIG_ID_EEPROM
 181 #define CONFIG_SYS_I2C_EEPROM_NXID
 182 #define CONFIG_SYS_EEPROM_BUS_NUM       0
 183 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x50
 184 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  2
 185 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
 186 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
 187
 188 /*
 189  * DDR Setup
 190  */
 191 #define CONFIG_VERY_BIG_RAM
 192 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 193 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 194 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 195 #define CONFIG_CHIP_SELECTS_PER_CTRL    (4 * CONFIG_DIMM_SLOTS_PER_CTLR)
 196 #if defined(CONFIG_TARGET_T1024RDB)
 197 #define CONFIG_DDR_SPD
 198 #define CONFIG_SYS_SPD_BUS_NUM  0
 199 #define SPD_EEPROM_ADDRESS      0x51
 200 #define CONFIG_SYS_SDRAM_SIZE   4096    /* for fixed parameter use */
 201 #elif defined(CONFIG_TARGET_T1023RDB)
 202 #define CONFIG_SYS_DDR_RAW_TIMING
 203 #define CONFIG_SYS_SDRAM_SIZE   2048
 204 #endif
 205
 206 /*
 207  * IFC Definitions
 208  */
 209 #define CONFIG_SYS_FLASH_BASE   0xe8000000
 210 #ifdef CONFIG_PHYS_64BIT
 211 #define CONFIG_SYS_FLASH_BASE_PHYS      (0xf00000000ull | CONFIG_SYS_FLASH_BASE)
 212 #else
 213 #define CONFIG_SYS_FLASH_BASE_PHYS      CONFIG_SYS_FLASH_BASE
 214 #endif
 215
 216 #define CONFIG_SYS_NOR0_CSPR_EXT        (0xf)
 217 #define CONFIG_SYS_NOR0_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
 218                                 CSPR_PORT_SIZE_16 | \
 219                                 CSPR_MSEL_NOR | \
 220                                 CSPR_V)
 221 #define CONFIG_SYS_NOR_AMASK    IFC_AMASK(128*1024*1024)
 222
 223 /* NOR Flash Timing Params */
 224 #if defined(CONFIG_TARGET_T1024RDB)
 225 #define CONFIG_SYS_NOR_CSOR     CSOR_NAND_TRHZ_80
 226 #elif defined(CONFIG_TARGET_T1023RDB)
 227 #define CONFIG_SYS_NOR_CSOR    (CSOR_NOR_ADM_SHIFT(0) | \
 228                                 CSOR_NAND_TRHZ_80 | CSOR_NOR_ADM_SHFT_MODE_EN)
 229 #endif
 230 #define CONFIG_SYS_NOR_FTIM0    (FTIM0_NOR_TACSE(0x4) | \
 231                                 FTIM0_NOR_TEADC(0x5) | \
 232                                 FTIM0_NOR_TEAHC(0x5))
 233 #define CONFIG_SYS_NOR_FTIM1    (FTIM1_NOR_TACO(0x35) | \
 234                                 FTIM1_NOR_TRAD_NOR(0x1A) |\
 235                                 FTIM1_NOR_TSEQRAD_NOR(0x13))
 236 #define CONFIG_SYS_NOR_FTIM2    (FTIM2_NOR_TCS(0x4) | \
 237                                 FTIM2_NOR_TCH(0x4) | \
 238                                 FTIM2_NOR_TWPH(0x0E) | \
 239                                 FTIM2_NOR_TWP(0x1c))
 240 #define CONFIG_SYS_NOR_FTIM3    0x0
 241
 242 #define CONFIG_SYS_FLASH_QUIET_TEST
 243 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
 244
 245 #define CONFIG_SYS_MAX_FLASH_BANKS      1       /* number of banks */
 246 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device */
 247 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 248 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 249
 250 #define CONFIG_SYS_FLASH_EMPTY_INFO
 251 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS}
 252
 253 #ifdef CONFIG_TARGET_T1024RDB
 254 /* CPLD on IFC */
 255 #define CONFIG_SYS_CPLD_BASE            0xffdf0000
 256 #define CONFIG_SYS_CPLD_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_CPLD_BASE)
 257 #define CONFIG_SYS_CSPR2_EXT            (0xf)
 258 #define CONFIG_SYS_CSPR2                (CSPR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE) \
 259                                                 | CSPR_PORT_SIZE_8 \
 260                                                 | CSPR_MSEL_GPCM \
 261                                                 | CSPR_V)
 262 #define CONFIG_SYS_AMASK2               IFC_AMASK(64*1024)
 263 #define CONFIG_SYS_CSOR2                0x0
 264
 265 /* CPLD Timing parameters for IFC CS2 */
 266 #define CONFIG_SYS_CS2_FTIM0            (FTIM0_GPCM_TACSE(0x0e) | \
 267                                                 FTIM0_GPCM_TEADC(0x0e) | \
 268                                                 FTIM0_GPCM_TEAHC(0x0e))
 269 #define CONFIG_SYS_CS2_FTIM1            (FTIM1_GPCM_TACO(0x0e) | \
 270                                                 FTIM1_GPCM_TRAD(0x1f))
 271 #define CONFIG_SYS_CS2_FTIM2            (FTIM2_GPCM_TCS(0x0e) | \
 272                                                 FTIM2_GPCM_TCH(0x8) | \
 273                                                 FTIM2_GPCM_TWP(0x1f))
 274 #define CONFIG_SYS_CS2_FTIM3            0x0
 275 #endif
 276
 277 /* NAND Flash on IFC */
 278 #define CONFIG_NAND_FSL_IFC
 279 #define CONFIG_SYS_NAND_BASE            0xff800000
 280 #ifdef CONFIG_PHYS_64BIT
 281 #define CONFIG_SYS_NAND_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_NAND_BASE)
 282 #else
 283 #define CONFIG_SYS_NAND_BASE_PHYS       CONFIG_SYS_NAND_BASE
 284 #endif
 285 #define CONFIG_SYS_NAND_CSPR_EXT        (0xf)
 286 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 287                                 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
 288                                 | CSPR_MSEL_NAND        /* MSEL = NAND */ \
 289                                 | CSPR_V)
 290 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64*1024)
 291
 292 #if defined(CONFIG_TARGET_T1024RDB)
 293 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 294                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 295                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
 296                                 | CSOR_NAND_RAL_3       /* RAL = 3Byes */ \
 297                                 | CSOR_NAND_PGS_4K      /* Page Size = 4K */ \
 298                                 | CSOR_NAND_SPRZ_224    /* Spare size = 224 */ \
 299                                 | CSOR_NAND_PB(64))     /*Pages Per Block = 64*/
 300 #define CONFIG_SYS_NAND_BLOCK_SIZE      (512 * 1024)
 301 #elif defined(CONFIG_TARGET_T1023RDB)
 302 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 303                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 304                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
 305                                 | CSOR_NAND_RAL_3       /* RAL 3Bytes */ \
 306                                 | CSOR_NAND_PGS_2K      /* Page Size = 2K */ \
 307                                 | CSOR_NAND_SPRZ_128    /* Spare size = 128 */ \
 308                                 | CSOR_NAND_PB(64))     /*Pages Per Block = 64*/
 309 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128 * 1024)
 310 #endif
 311
 312 #define CONFIG_SYS_NAND_ONFI_DETECTION
 313 /* ONFI NAND Flash mode0 Timing Params */
 314 #define CONFIG_SYS_NAND_FTIM0           (FTIM0_NAND_TCCST(0x07) | \
 315                                         FTIM0_NAND_TWP(0x18)   | \
 316                                         FTIM0_NAND_TWCHT(0x07) | \
 317                                         FTIM0_NAND_TWH(0x0a))
 318 #define CONFIG_SYS_NAND_FTIM1           (FTIM1_NAND_TADLE(0x32) | \
 319                                         FTIM1_NAND_TWBE(0x39)  | \
 320                                         FTIM1_NAND_TRR(0x0e)   | \
 321                                         FTIM1_NAND_TRP(0x18))
 322 #define CONFIG_SYS_NAND_FTIM2           (FTIM2_NAND_TRAD(0x0f) | \
 323                                         FTIM2_NAND_TREH(0x0a) | \
 324                                         FTIM2_NAND_TWHRE(0x1e))
 325 #define CONFIG_SYS_NAND_FTIM3           0x0
 326
 327 #define CONFIG_SYS_NAND_DDR_LAW         11
 328 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
 329 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 330
 331 #if defined(CONFIG_MTD_RAW_NAND)
 332 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NAND_CSPR_EXT
 333 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
 334 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
 335 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
 336 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
 337 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
 338 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
 339 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
 340 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 341 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR0_CSPR
 342 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
 343 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 344 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 345 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 346 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 347 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 348 #else
 349 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 350 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR0_CSPR
 351 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 352 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 353 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 354 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 355 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 356 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 357 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NAND_CSPR_EXT
 358 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NAND_CSPR
 359 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NAND_AMASK
 360 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NAND_CSOR
 361 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NAND_FTIM0
 362 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NAND_FTIM1
 363 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NAND_FTIM2
 364 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NAND_FTIM3
 365 #endif
 366
 367 #ifdef CONFIG_SPL_BUILD
 368 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SPL_TEXT_BASE
 369 #else
 370 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_TEXT_BASE
 371 #endif
 372
 373 #if defined(CONFIG_RAMBOOT_PBL)
 374 #define CONFIG_SYS_RAMBOOT
 375 #endif
 376
 377 #define CONFIG_HWCONFIG
 378
 379 /* define to use L1 as initial stack */
 380 #define CONFIG_L1_INIT_RAM
 381 #define CONFIG_SYS_INIT_RAM_LOCK
 382 #define CONFIG_SYS_INIT_RAM_ADDR        0xfdd00000      /* Initial L1 address */
 383 #ifdef CONFIG_PHYS_64BIT
 384 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH      0xf
 385 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW       0xfe03c000
 386 /* The assembler doesn't like typecast */
 387 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
 388         ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
 389           CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
 390 #else
 391 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS   0xfe03c000 /* Initial L1 address */
 392 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0
 393 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS
 394 #endif
 395 #define CONFIG_SYS_INIT_RAM_SIZE                0x00004000
 396
 397 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - \
 398                                         GENERATED_GBL_DATA_SIZE)
 399 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 400
 401 #define CONFIG_SYS_MONITOR_LEN          (768 * 1024)
 402 #define CONFIG_SYS_MALLOC_LEN           (10 * 1024 * 1024)
 403
 404 /* Serial Port */
 405 #define CONFIG_SYS_NS16550_SERIAL
 406 #define CONFIG_SYS_NS16550_REG_SIZE     1
 407 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
 408
 409 #define CONFIG_SYS_BAUDRATE_TABLE       \
 410         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 411
 412 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
 413 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
 414 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
 415 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
 416
 417 /* Video */
 418 #undef CONFIG_FSL_DIU_FB        /* RDB doesn't support DIU */
 419 #ifdef CONFIG_FSL_DIU_FB
 420 #define CONFIG_SYS_DIU_ADDR     (CONFIG_SYS_CCSRBAR + 0x180000)
 421 #define CONFIG_VIDEO_LOGO
 422 #define CONFIG_VIDEO_BMP_LOGO
 423 #define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS
 424 /*
 425  * With CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS, flash I/O is really slow, so
 426  * disable empty flash sector detection, which is I/O-intensive.
 427  */
 428 #undef CONFIG_SYS_FLASH_EMPTY_INFO
 429 #endif
 430
 431 /* I2C */
 432 #ifndef CONFIG_DM_I2C
 433 #define CONFIG_SYS_I2C
 434 #define CONFIG_SYS_FSL_I2C_SPEED        50000   /* I2C speed in Hz */
 435 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 436 #define CONFIG_SYS_FSL_I2C2_SPEED       50000   /* I2C speed in Hz */
 437 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
 438 #define CONFIG_SYS_FSL_I2C_OFFSET       0x118000
 439 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x118100
 440 #else
 441 #define CONFIG_I2C_SET_DEFAULT_BUS_NUM
 442 #define CONFIG_I2C_DEFAULT_BUS_NUMBER   0
 443 #endif
 444
 445 #define CONFIG_SYS_I2C_FSL              /* Use FSL common I2C driver */
 446 #define I2C_PCA6408_BUS_NUM             1
 447 #define I2C_PCA6408_ADDR                0x20
 448
 449 /* I2C bus multiplexer */
 450 #define I2C_MUX_CH_DEFAULT      0x8
 451
 452 /*
 453  * RTC configuration
 454  */
 455 #define RTC
 456 #define CONFIG_RTC_DS1337       1
 457 #define CONFIG_SYS_I2C_RTC_ADDR 0x68
 458
 459 /*
 460  * eSPI - Enhanced SPI
 461  */
 462
 463 /*
 464  * General PCIe
 465  * Memory space is mapped 1-1, but I/O space must start from 0.
 466  */
 467 #define CONFIG_PCIE1            /* PCIE controller 1 */
 468 #define CONFIG_PCIE2            /* PCIE controller 2 */
 469 #define CONFIG_PCIE3            /* PCIE controller 3 */
 470 #define CONFIG_SYS_PCI_64BIT    /* enable 64-bit PCI resources */
 471
 472 #ifdef CONFIG_PCI
 473 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
 474 #ifdef CONFIG_PCIE1
 475 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
 476 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
 477 #define CONFIG_SYS_PCIE1_IO_VIRT        0xf8000000
 478 #define CONFIG_SYS_PCIE1_IO_PHYS        0xff8000000ull
 479 #endif
 480
 481 /* controller 2, Slot 2, tgtid 2, Base address 201000 */
 482 #ifdef CONFIG_PCIE2
 483 #define CONFIG_SYS_PCIE2_MEM_VIRT       0x90000000
 484 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc10000000ull
 485 #define CONFIG_SYS_PCIE2_IO_VIRT        0xf8010000
 486 #define CONFIG_SYS_PCIE2_IO_PHYS        0xff8010000ull
 487 #endif
 488
 489 /* controller 3, Slot 1, tgtid 1, Base address 202000 */
 490 #ifdef CONFIG_PCIE3
 491 #define CONFIG_SYS_PCIE3_MEM_VIRT       0xa0000000
 492 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc20000000ull
 493 #define CONFIG_SYS_PCIE3_IO_VIRT        0xf8020000
 494 #define CONFIG_SYS_PCIE3_IO_PHYS        0xff8020000ull
 495 #endif
 496
 497 #if !defined(CONFIG_DM_PCI)
 498 #define CONFIG_FSL_PCI_INIT     /* Use common FSL init code */
 499 #define CONFIG_SYS_PCIE1_MEM_BUS        0xe0000000
 500 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x10000000      /* 256M */
 501 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 502 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 503 #define CONFIG_SYS_PCIE2_MEM_BUS        0xe0000000
 504 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x10000000 /* 256M */
 505 #define CONFIG_SYS_PCIE2_IO_BUS         0x00000000
 506 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00010000      /* 64k */
 507 #define CONFIG_SYS_PCIE3_MEM_BUS        0xe0000000
 508 #define CONFIG_SYS_PCIE3_MEM_SIZE       0x10000000      /* 256M */
 509 #define CONFIG_SYS_PCIE3_IO_BUS         0x00000000
 510 #define CONFIG_SYS_PCIE3_IO_SIZE        0x00010000      /* 64k */
 511 #define CONFIG_PCI_INDIRECT_BRIDGE
 512 #endif
 513
 514 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 515 #endif  /* CONFIG_PCI */
 516
 517 /*
 518  * USB
 519  */
 520 #define CONFIG_HAS_FSL_DR_USB
 521
 522 #ifdef CONFIG_HAS_FSL_DR_USB
 523 #define CONFIG_USB_EHCI_FSL
 524 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 525 #endif
 526
 527 /*
 528  * SDHC
 529  */
 530 #ifdef CONFIG_MMC
 531 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 532 #endif
 533
 534 /* Qman/Bman */
 535 #ifndef CONFIG_NOBQFMAN
 536 #define CONFIG_SYS_BMAN_NUM_PORTALS     10
 537 #define CONFIG_SYS_BMAN_MEM_BASE        0xf4000000
 538 #ifdef CONFIG_PHYS_64BIT
 539 #define CONFIG_SYS_BMAN_MEM_PHYS        0xff4000000ull
 540 #else
 541 #define CONFIG_SYS_BMAN_MEM_PHYS        CONFIG_SYS_BMAN_MEM_BASE
 542 #endif
 543 #define CONFIG_SYS_BMAN_MEM_SIZE        0x02000000
 544 #define CONFIG_SYS_BMAN_SP_CENA_SIZE    0x4000
 545 #define CONFIG_SYS_BMAN_SP_CINH_SIZE    0x1000
 546 #define CONFIG_SYS_BMAN_CENA_BASE       CONFIG_SYS_BMAN_MEM_BASE
 547 #define CONFIG_SYS_BMAN_CENA_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 548 #define CONFIG_SYS_BMAN_CINH_BASE       (CONFIG_SYS_BMAN_MEM_BASE + \
 549                                         CONFIG_SYS_BMAN_CENA_SIZE)
 550 #define CONFIG_SYS_BMAN_CINH_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 551 #define CONFIG_SYS_BMAN_SWP_ISDR_REG    0xE08
 552 #define CONFIG_SYS_QMAN_NUM_PORTALS     10
 553 #define CONFIG_SYS_QMAN_MEM_BASE        0xf6000000
 554 #ifdef CONFIG_PHYS_64BIT
 555 #define CONFIG_SYS_QMAN_MEM_PHYS        0xff6000000ull
 556 #else
 557 #define CONFIG_SYS_QMAN_MEM_PHYS        CONFIG_SYS_QMAN_MEM_BASE
 558 #endif
 559 #define CONFIG_SYS_QMAN_MEM_SIZE        0x02000000
 560 #define CONFIG_SYS_QMAN_SP_CENA_SIZE    0x4000
 561 #define CONFIG_SYS_QMAN_SP_CINH_SIZE    0x1000
 562 #define CONFIG_SYS_QMAN_CENA_BASE       CONFIG_SYS_QMAN_MEM_BASE
 563 #define CONFIG_SYS_QMAN_CENA_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 564 #define CONFIG_SYS_QMAN_CINH_BASE       (CONFIG_SYS_QMAN_MEM_BASE + \
 565                                         CONFIG_SYS_QMAN_CENA_SIZE)
 566 #define CONFIG_SYS_QMAN_CINH_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 567 #define CONFIG_SYS_QMAN_SWP_ISDR_REG    0xE08
 568
 569 #define CONFIG_SYS_DPAA_FMAN
 570
 571 /* Default address of microcode for the Linux FMan driver */
 572 #if defined(CONFIG_SPIFLASH)
 573 /*
 574  * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
 575  * env, so we got 0x110000.
 576  */
 577 #define CONFIG_SYS_FMAN_FW_ADDR 0x110000
 578 #define CONFIG_SYS_QE_FW_ADDR   0x130000
 579 #elif defined(CONFIG_SDCARD)
 580 /*
 581  * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
 582  * about 1MB (2048 blocks), Env is stored after the image, and the env size is
 583  * 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 2080(0x820).
 584  */
 585 #define CONFIG_SYS_FMAN_FW_ADDR         (512 * 0x820)
 586 #define CONFIG_SYS_QE_FW_ADDR           (512 * 0x920)
 587 #elif defined(CONFIG_MTD_RAW_NAND)
 588 #if defined(CONFIG_TARGET_T1024RDB)
 589 #define CONFIG_SYS_FMAN_FW_ADDR         (3 * CONFIG_SYS_NAND_BLOCK_SIZE)
 590 #define CONFIG_SYS_QE_FW_ADDR           (4 * CONFIG_SYS_NAND_BLOCK_SIZE)
 591 #elif defined(CONFIG_TARGET_T1023RDB)
 592 #define CONFIG_SYS_FMAN_FW_ADDR         (11 * CONFIG_SYS_NAND_BLOCK_SIZE)
 593 #define CONFIG_SYS_QE_FW_ADDR           (12 * CONFIG_SYS_NAND_BLOCK_SIZE)
 594 #endif
 595 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
 596 /*
 597  * Slave has no ucode locally, it can fetch this from remote. When implementing
 598  * in two corenet boards, slave's ucode could be stored in master's memory
 599  * space, the address can be mapped from slave TLB->slave LAW->
 600  * slave SRIO or PCIE outbound window->master inbound window->
 601  * master LAW->the ucode address in master's memory space.
 602  */
 603 #define CONFIG_SYS_FMAN_FW_ADDR         0xFFE00000
 604 #else
 605 #define CONFIG_SYS_FMAN_FW_ADDR         0xEFF00000
 606 #define CONFIG_SYS_QE_FW_ADDR           0xEFE00000
 607 #endif
 608 #define CONFIG_SYS_QE_FMAN_FW_LENGTH    0x10000
 609 #define CONFIG_SYS_FDT_PAD              (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 610 #endif /* CONFIG_NOBQFMAN */
 611
 612 #ifdef CONFIG_SYS_DPAA_FMAN
 613 #if defined(CONFIG_TARGET_T1024RDB)
 614 #define RGMII_PHY1_ADDR         0x2
 615 #define RGMII_PHY2_ADDR         0x6
 616 #define SGMII_AQR_PHY_ADDR      0x2
 617 #define FM1_10GEC1_PHY_ADDR     0x1
 618 #elif defined(CONFIG_TARGET_T1023RDB)
 619 #define RGMII_PHY1_ADDR         0x1
 620 #define SGMII_RTK_PHY_ADDR      0x3
 621 #define SGMII_AQR_PHY_ADDR      0x2
 622 #endif
 623 #endif
 624
 625 #ifdef CONFIG_FMAN_ENET
 626 #define CONFIG_ETHPRIME         "FM1@DTSEC4"
 627 #endif
 628
 629 /*
 630  * Dynamic MTD Partition support with mtdparts
 631  */
 632
 633 /*
 634  * Environment
 635  */
 636 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
 637 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 638
 639 /*
 640  * Miscellaneous configurable options
 641  */
 642 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 643
 644 /*
 645  * For booting Linux, the board info and command line data
 646  * have to be in the first 64 MB of memory, since this is
 647  * the maximum mapped by the Linux kernel during initialization.
 648  */
 649 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial map for Linux*/
 650 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 651
 652 #ifdef CONFIG_CMD_KGDB
 653 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 654 #endif
 655
 656 /*
 657  * Environment Configuration
 658  */
 659 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 660 #define CONFIG_BOOTFILE         "uImage"
 661 #define CONFIG_UBOOTPATH        u-boot.bin /* U-Boot image on TFTP server */
 662 #define CONFIG_LOADADDR         1000000 /* default location for tftp, bootm */
 663 #define __USB_PHY_TYPE          utmi
 664
 665 #ifdef CONFIG_ARCH_T1024
 666 #define CONFIG_BOARDNAME t1024rdb
 667 #define BANK_INTLV cs0_cs1
 668 #else
 669 #define CONFIG_BOARDNAME t1023rdb
 670 #define BANK_INTLV  null
 671 #endif
 672
 673 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 674         "hwconfig=fsl_ddr:ctlr_intlv=cacheline,"                \
 675         "bank_intlv=" __stringify(BANK_INTLV) "\0"              \
 676         "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"  \
 677         "ramdiskfile=" __stringify(CONFIG_BOARDNAME) "/ramdisk.uboot\0" \
 678         "fdtfile=" __stringify(CONFIG_BOARDNAME) "/"            \
 679         __stringify(CONFIG_BOARDNAME) ".dtb\0"                  \
 680         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"             \
 681         "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"     \
 682         "bootargs=root=/dev/ram rw console=ttyS0,115200\0" \
 683         "netdev=eth0\0"                                         \
 684         "tftpflash=tftpboot $loadaddr $uboot && "               \
 685         "protect off $ubootaddr +$filesize && "                 \
 686         "erase $ubootaddr +$filesize && "                       \
 687         "cp.b $loadaddr $ubootaddr $filesize && "               \
 688         "protect on $ubootaddr +$filesize && "                  \
 689         "cmp.b $loadaddr $ubootaddr $filesize\0"                \
 690         "consoledev=ttyS0\0"                                    \
 691         "ramdiskaddr=2000000\0"                                 \
 692         "fdtaddr=1e00000\0"                                     \
 693         "bdev=sda3\0"
 694
 695 #define CONFIG_LINUX                                    \
 696         "setenv bootargs root=/dev/ram rw "             \
 697         "console=$consoledev,$baudrate $othbootargs;"   \
 698         "setenv ramdiskaddr 0x02000000;"                \
 699         "setenv fdtaddr 0x00c00000;"                    \
 700         "setenv loadaddr 0x1000000;"                    \
 701         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 702
 703 #define CONFIG_NFSBOOTCOMMAND                   \
 704         "setenv bootargs root=/dev/nfs rw "     \
 705         "nfsroot=$serverip:$rootpath "          \
 706         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 707         "console=$consoledev,$baudrate $othbootargs;"   \
 708         "tftp $loadaddr $bootfile;"             \
 709         "tftp $fdtaddr $fdtfile;"               \
 710         "bootm $loadaddr - $fdtaddr"
 711
 712 #define CONFIG_BOOTCOMMAND      CONFIG_LINUX
 713
 714 #include <asm/fsl_secure_boot.h>
 715
 716 #endif  /* __T1024RDB_H */