include/configs/T102xQDS.h

   1 /*
   2  * Copyright 2014 Freescale Semiconductor, Inc.
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 /*
   8  * T1024/T1023 QDS board configuration file
   9  */
  10
  11 #ifndef __T1024QDS_H
  12 #define __T1024QDS_H
  13
  14 /* High Level Configuration Options */
  15 #define CONFIG_SYS_BOOK3E_HV            /* Category E.HV supported */
  16 #define CONFIG_MP                       /* support multiple processors */
  17 #define CONFIG_ENABLE_36BIT_PHYS
  18
  19 #ifdef CONFIG_PHYS_64BIT
  20 #define CONFIG_ADDR_MAP         1
  21 #define CONFIG_SYS_NUM_ADDR_MAP 64      /* number of TLB1 entries */
  22 #endif
  23
  24 #define CONFIG_SYS_FSL_CPC              /* Corenet Platform Cache */
  25 #define CONFIG_SYS_NUM_CPC              CONFIG_SYS_NUM_DDR_CTLRS
  26
  27 #define CONFIG_ENV_OVERWRITE
  28
  29 #define CONFIG_DEEP_SLEEP
  30
  31 #ifdef CONFIG_RAMBOOT_PBL
  32 #define CONFIG_SYS_FSL_PBL_PBI board/freescale/t102xqds/t1024_pbi.cfg
  33 #define CONFIG_SPL_FLUSH_IMAGE
  34 #define CONFIG_SPL_TARGET               "u-boot-with-spl.bin"
  35 #define CONFIG_SPL_TEXT_BASE            0xFFFD8000
  36 #define CONFIG_SPL_PAD_TO               0x40000
  37 #define CONFIG_SPL_MAX_SIZE             0x28000
  38 #define RESET_VECTOR_OFFSET             0x27FFC
  39 #define BOOT_PAGE_OFFSET                0x27000
  40 #ifdef CONFIG_SPL_BUILD
  41 #define CONFIG_SPL_SKIP_RELOCATE
  42 #define CONFIG_SPL_COMMON_INIT_DDR
  43 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
  44 #endif
  45
  46 #ifdef CONFIG_NAND
  47 #define CONFIG_SYS_NAND_U_BOOT_SIZE     (768 << 10)
  48 #define CONFIG_SYS_NAND_U_BOOT_DST      0x00200000
  49 #define CONFIG_SYS_NAND_U_BOOT_START    0x00200000
  50 #define CONFIG_SYS_NAND_U_BOOT_OFFS     (256 << 10)
  51 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
  52 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xqds/t1024_nand_rcw.cfg
  53 #define CONFIG_SPL_NAND_BOOT
  54 #endif
  55
  56 #ifdef CONFIG_SPIFLASH
  57 #define CONFIG_RESET_VECTOR_ADDRESS             0x200FFC
  58 #define CONFIG_SPL_SPI_FLASH_MINIMAL
  59 #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE        (768 << 10)
  60 #define CONFIG_SYS_SPI_FLASH_U_BOOT_DST         (0x00200000)
  61 #define CONFIG_SYS_SPI_FLASH_U_BOOT_START       (0x00200000)
  62 #define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS        (256 << 10)
  63 #define CONFIG_SYS_LDSCRIPT             "arch/powerpc/cpu/mpc85xx/u-boot.lds"
  64 #ifndef CONFIG_SPL_BUILD
  65 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
  66 #endif
  67 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xqds/t1024_spi_rcw.cfg
  68 #define CONFIG_SPL_SPI_BOOT
  69 #endif
  70
  71 #ifdef CONFIG_SDCARD
  72 #define CONFIG_RESET_VECTOR_ADDRESS             0x200FFC
  73 #define CONFIG_SPL_MMC_MINIMAL
  74 #define CONFIG_SYS_MMC_U_BOOT_SIZE      (768 << 10)
  75 #define CONFIG_SYS_MMC_U_BOOT_DST       (0x00200000)
  76 #define CONFIG_SYS_MMC_U_BOOT_START     (0x00200000)
  77 #define CONFIG_SYS_MMC_U_BOOT_OFFS      (260 << 10)
  78 #define CONFIG_SYS_LDSCRIPT             "arch/powerpc/cpu/mpc85xx/u-boot.lds"
  79 #ifndef CONFIG_SPL_BUILD
  80 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
  81 #endif
  82 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xqds/t1024_sd_rcw.cfg
  83 #define CONFIG_SPL_MMC_BOOT
  84 #endif
  85
  86 #endif /* CONFIG_RAMBOOT_PBL */
  87
  88 #ifndef CONFIG_RESET_VECTOR_ADDRESS
  89 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
  90 #endif
  91
  92 #ifdef CONFIG_MTD_NOR_FLASH
  93 #define CONFIG_FLASH_CFI_DRIVER
  94 #define CONFIG_SYS_FLASH_CFI
  95 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
  96 #endif
  97
  98 /* PCIe Boot - Master */
  99 #define CONFIG_SRIO_PCIE_BOOT_MASTER
 100 /*
 101  * for slave u-boot IMAGE instored in master memory space,
 102  * PHYS must be aligned based on the SIZE
 103  */
 104 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff00000ull
 105 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE     0x100000 /* 1M */
 106 #ifdef CONFIG_PHYS_64BIT
 107 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef200000ull
 108 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff00000ull
 109 #else
 110 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xef200000
 111 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0xfff00000
 112 #endif
 113 /*
 114  * for slave UCODE and ENV instored in master memory space,
 115  * PHYS must be aligned based on the SIZE
 116  */
 117 #ifdef CONFIG_PHYS_64BIT
 118 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef100000ull
 119 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS  0x3ffe00000ull
 120 #else
 121 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xef100000
 122 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS  0xffe00000
 123 #endif
 124 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE     0x40000 /* 256K */
 125 /* slave core release by master*/
 126 #define CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET 0xe00e4
 127 #define CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK 0x00000001 /* release core 0 */
 128
 129 /* PCIe Boot - Slave */
 130 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
 131 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR 0xFFE00000
 132 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS \
 133                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR)
 134 /* Set 1M boot space for PCIe boot */
 135 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_SYS_TEXT_BASE & 0xfff00000)
 136 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS       \
 137                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR)
 138 #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc
 139 #endif
 140
 141 #if defined(CONFIG_SPIFLASH)
 142 #define CONFIG_SYS_EXTRA_ENV_RELOC
 143 #define CONFIG_ENV_SPI_BUS              0
 144 #define CONFIG_ENV_SPI_CS               0
 145 #define CONFIG_ENV_SPI_MAX_HZ           10000000
 146 #define CONFIG_ENV_SPI_MODE             0
 147 #define CONFIG_ENV_SIZE                 0x2000          /* 8KB */
 148 #define CONFIG_ENV_OFFSET               0x100000        /* 1MB */
 149 #define CONFIG_ENV_SECT_SIZE            0x10000
 150 #elif defined(CONFIG_SDCARD)
 151 #define CONFIG_SYS_EXTRA_ENV_RELOC
 152 #define CONFIG_SYS_MMC_ENV_DEV          0
 153 #define CONFIG_ENV_SIZE                 0x2000
 154 #define CONFIG_ENV_OFFSET               (512 * 0x800)
 155 #elif defined(CONFIG_NAND)
 156 #define CONFIG_SYS_EXTRA_ENV_RELOC
 157 #define CONFIG_ENV_SIZE                 0x2000
 158 #define CONFIG_ENV_OFFSET               (10 * CONFIG_SYS_NAND_BLOCK_SIZE)
 159 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
 160 #define CONFIG_ENV_ADDR         0xffe20000
 161 #define CONFIG_ENV_SIZE         0x2000
 162 #elif defined(CONFIG_ENV_IS_NOWHERE)
 163 #define CONFIG_ENV_SIZE         0x2000
 164 #else
 165 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 166 #define CONFIG_ENV_SIZE         0x2000
 167 #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
 168 #endif
 169
 170 #ifndef __ASSEMBLY__
 171 unsigned long get_board_sys_clk(void);
 172 unsigned long get_board_ddr_clk(void);
 173 #endif
 174
 175 #define CONFIG_SYS_CLK_FREQ     get_board_sys_clk()
 176 #define CONFIG_DDR_CLK_FREQ     get_board_ddr_clk()
 177
 178 /*
 179  * These can be toggled for performance analysis, otherwise use default.
 180  */
 181 #define CONFIG_SYS_CACHE_STASHING
 182 #define CONFIG_BACKSIDE_L2_CACHE
 183 #define CONFIG_SYS_INIT_L2CSR0          L2CSR0_L2E
 184 #define CONFIG_BTB                      /* toggle branch predition */
 185 #define CONFIG_DDR_ECC
 186 #ifdef CONFIG_DDR_ECC
 187 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
 188 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
 189 #endif
 190
 191 #define CONFIG_SYS_MEMTEST_START        0x00200000 /* memtest works on */
 192 #define CONFIG_SYS_MEMTEST_END          0x00400000
 193 #define CONFIG_SYS_ALT_MEMTEST
 194
 195 /*
 196  *  Config the L3 Cache as L3 SRAM
 197  */
 198 #define CONFIG_SYS_INIT_L3_ADDR         0xFFFC0000
 199 #define CONFIG_SYS_L3_SIZE              (256 << 10)
 200 #define CONFIG_SPL_GD_ADDR              (CONFIG_SYS_INIT_L3_ADDR + 32 * 1024)
 201 #ifdef CONFIG_RAMBOOT_PBL
 202 #define CONFIG_ENV_ADDR                 (CONFIG_SPL_GD_ADDR + 4 * 1024)
 203 #endif
 204 #define CONFIG_SPL_RELOC_MALLOC_ADDR    (CONFIG_SPL_GD_ADDR + 12 * 1024)
 205 #define CONFIG_SPL_RELOC_MALLOC_SIZE    (30 << 10)
 206 #define CONFIG_SPL_RELOC_STACK          (CONFIG_SPL_GD_ADDR + 64 * 1024)
 207 #define CONFIG_SPL_RELOC_STACK_SIZE     (22 << 10)
 208
 209 #ifdef CONFIG_PHYS_64BIT
 210 #define CONFIG_SYS_DCSRBAR              0xf0000000
 211 #define CONFIG_SYS_DCSRBAR_PHYS         0xf00000000ull
 212 #endif
 213
 214 /* EEPROM */
 215 #define CONFIG_ID_EEPROM
 216 #define CONFIG_SYS_I2C_EEPROM_NXID
 217 #define CONFIG_SYS_EEPROM_BUS_NUM       0
 218 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x57
 219 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  1
 220 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
 221 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
 222
 223 /*
 224  * DDR Setup
 225  */
 226 #define CONFIG_VERY_BIG_RAM
 227 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 228 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 229 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 230 #define CONFIG_CHIP_SELECTS_PER_CTRL    (4 * CONFIG_DIMM_SLOTS_PER_CTLR)
 231 #define CONFIG_DDR_SPD
 232
 233 #define CONFIG_SYS_SPD_BUS_NUM  0
 234 #define SPD_EEPROM_ADDRESS      0x51
 235
 236 #define CONFIG_SYS_SDRAM_SIZE   4096    /* for fixed parameter use */
 237
 238 /*
 239  * IFC Definitions
 240  */
 241 #define CONFIG_SYS_FLASH_BASE   0xe0000000
 242 #ifdef CONFIG_PHYS_64BIT
 243 #define CONFIG_SYS_FLASH_BASE_PHYS      (0xf00000000ull | CONFIG_SYS_FLASH_BASE)
 244 #else
 245 #define CONFIG_SYS_FLASH_BASE_PHYS      CONFIG_SYS_FLASH_BASE
 246 #endif
 247
 248 #define CONFIG_SYS_NOR0_CSPR_EXT        (0xf)
 249 #define CONFIG_SYS_NOR0_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \
 250                                 + 0x8000000) | \
 251                                 CSPR_PORT_SIZE_16 | \
 252                                 CSPR_MSEL_NOR | \
 253                                 CSPR_V)
 254 #define CONFIG_SYS_NOR1_CSPR_EXT        (0xf)
 255 #define CONFIG_SYS_NOR1_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
 256                                 CSPR_PORT_SIZE_16 | \
 257                                 CSPR_MSEL_NOR | \
 258                                 CSPR_V)
 259 #define CONFIG_SYS_NOR_AMASK    IFC_AMASK(128*1024*1024)
 260 /* NOR Flash Timing Params */
 261 #define CONFIG_SYS_NOR_CSOR     CSOR_NAND_TRHZ_80
 262 #define CONFIG_SYS_NOR_FTIM0    (FTIM0_NOR_TACSE(0x4) | \
 263                                 FTIM0_NOR_TEADC(0x5) | \
 264                                 FTIM0_NOR_TEAHC(0x5))
 265 #define CONFIG_SYS_NOR_FTIM1    (FTIM1_NOR_TACO(0x35) | \
 266                                 FTIM1_NOR_TRAD_NOR(0x1A) |\
 267                                 FTIM1_NOR_TSEQRAD_NOR(0x13))
 268 #define CONFIG_SYS_NOR_FTIM2    (FTIM2_NOR_TCS(0x4) | \
 269                                 FTIM2_NOR_TCH(0x4) | \
 270                                 FTIM2_NOR_TWPH(0x0E) | \
 271                                 FTIM2_NOR_TWP(0x1c))
 272 #define CONFIG_SYS_NOR_FTIM3    0x0
 273
 274 #define CONFIG_SYS_FLASH_QUIET_TEST
 275 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
 276
 277 #define CONFIG_SYS_MAX_FLASH_BANKS      2       /* number of banks */
 278 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device */
 279 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 280 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 281
 282 #define CONFIG_SYS_FLASH_EMPTY_INFO
 283 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS \
 284                                         + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS}
 285 #define CONFIG_FSL_QIXIS        /* use common QIXIS code */
 286 #define QIXIS_BASE              0xffdf0000
 287 #ifdef CONFIG_PHYS_64BIT
 288 #define QIXIS_BASE_PHYS         (0xf00000000ull | QIXIS_BASE)
 289 #else
 290 #define QIXIS_BASE_PHYS         QIXIS_BASE
 291 #endif
 292 #define QIXIS_LBMAP_SWITCH              0x06
 293 #define QIXIS_LBMAP_MASK                0x0f
 294 #define QIXIS_LBMAP_SHIFT               0
 295 #define QIXIS_LBMAP_DFLTBANK            0x00
 296 #define QIXIS_LBMAP_ALTBANK             0x04
 297 #define QIXIS_RST_CTL_RESET             0x31
 298 #define QIXIS_RCFG_CTL_RECONFIG_IDLE    0x20
 299 #define QIXIS_RCFG_CTL_RECONFIG_START   0x21
 300 #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE   0x08
 301 #define QIXIS_RST_FORCE_MEM             0x01
 302
 303 #define CONFIG_SYS_CSPR3_EXT    (0xf)
 304 #define CONFIG_SYS_CSPR3        (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) \
 305                                 | CSPR_PORT_SIZE_8 \
 306                                 | CSPR_MSEL_GPCM \
 307                                 | CSPR_V)
 308 #define CONFIG_SYS_AMASK3       IFC_AMASK(4*1024)
 309 #define CONFIG_SYS_CSOR3        0x0
 310 /* QIXIS Timing parameters for IFC CS3 */
 311 #define CONFIG_SYS_CS3_FTIM0            (FTIM0_GPCM_TACSE(0x0e) | \
 312                                         FTIM0_GPCM_TEADC(0x0e) | \
 313                                         FTIM0_GPCM_TEAHC(0x0e))
 314 #define CONFIG_SYS_CS3_FTIM1            (FTIM1_GPCM_TACO(0xff) | \
 315                                         FTIM1_GPCM_TRAD(0x3f))
 316 #define CONFIG_SYS_CS3_FTIM2            (FTIM2_GPCM_TCS(0x0e) | \
 317                                         FTIM2_GPCM_TCH(0x8) | \
 318                                         FTIM2_GPCM_TWP(0x1f))
 319 #define CONFIG_SYS_CS3_FTIM3            0x0
 320
 321 #define CONFIG_NAND_FSL_IFC
 322 #define CONFIG_SYS_NAND_BASE            0xff800000
 323 #ifdef CONFIG_PHYS_64BIT
 324 #define CONFIG_SYS_NAND_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_NAND_BASE)
 325 #else
 326 #define CONFIG_SYS_NAND_BASE_PHYS       CONFIG_SYS_NAND_BASE
 327 #endif
 328 #define CONFIG_SYS_NAND_CSPR_EXT        (0xf)
 329 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 330                                 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
 331                                 | CSPR_MSEL_NAND        /* MSEL = NAND */ \
 332                                 | CSPR_V)
 333 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64*1024)
 334
 335 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 336                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 337                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
 338                                 | CSOR_NAND_RAL_3       /* RAL = 3Byes */ \
 339                                 | CSOR_NAND_PGS_2K      /* Page Size = 2K */ \
 340                                 | CSOR_NAND_SPRZ_64/* Spare size = 64 */ \
 341                                 | CSOR_NAND_PB(64))     /*Pages Per Block = 64*/
 342
 343 #define CONFIG_SYS_NAND_ONFI_DETECTION
 344
 345 /* ONFI NAND Flash mode0 Timing Params */
 346 #define CONFIG_SYS_NAND_FTIM0           (FTIM0_NAND_TCCST(0x07) | \
 347                                         FTIM0_NAND_TWP(0x18)   | \
 348                                         FTIM0_NAND_TWCHT(0x07) | \
 349                                         FTIM0_NAND_TWH(0x0a))
 350 #define CONFIG_SYS_NAND_FTIM1           (FTIM1_NAND_TADLE(0x32) | \
 351                                         FTIM1_NAND_TWBE(0x39)  | \
 352                                         FTIM1_NAND_TRR(0x0e)   | \
 353                                         FTIM1_NAND_TRP(0x18))
 354 #define CONFIG_SYS_NAND_FTIM2           (FTIM2_NAND_TRAD(0x0f) | \
 355                                         FTIM2_NAND_TREH(0x0a) | \
 356                                         FTIM2_NAND_TWHRE(0x1e))
 357 #define CONFIG_SYS_NAND_FTIM3           0x0
 358
 359 #define CONFIG_SYS_NAND_DDR_LAW         11
 360 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
 361 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 362
 363 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128 * 1024)
 364
 365 #if defined(CONFIG_NAND)
 366 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NAND_CSPR_EXT
 367 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
 368 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
 369 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
 370 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
 371 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
 372 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
 373 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
 374 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 375 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR0_CSPR
 376 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
 377 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 378 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 379 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 380 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 381 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 382 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NOR1_CSPR_EXT
 383 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NOR1_CSPR
 384 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NOR_AMASK
 385 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NOR_CSOR
 386 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NOR_FTIM0
 387 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NOR_FTIM1
 388 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NOR_FTIM2
 389 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NOR_FTIM3
 390 #else
 391 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 392 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR0_CSPR
 393 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 394 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 395 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 396 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 397 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 398 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 399 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR1_CSPR_EXT
 400 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR1_CSPR
 401 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
 402 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 403 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 404 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 405 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 406 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 407 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NAND_CSPR_EXT
 408 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NAND_CSPR
 409 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NAND_AMASK
 410 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NAND_CSOR
 411 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NAND_FTIM0
 412 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NAND_FTIM1
 413 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NAND_FTIM2
 414 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NAND_FTIM3
 415 #endif
 416
 417 #ifdef CONFIG_SPL_BUILD
 418 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SPL_TEXT_BASE
 419 #else
 420 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_TEXT_BASE
 421 #endif
 422
 423 #if defined(CONFIG_RAMBOOT_PBL)
 424 #define CONFIG_SYS_RAMBOOT
 425 #endif
 426
 427 #define CONFIG_BOARD_EARLY_INIT_R
 428 #define CONFIG_MISC_INIT_R
 429
 430 #define CONFIG_HWCONFIG
 431
 432 /* define to use L1 as initial stack */
 433 #define CONFIG_L1_INIT_RAM
 434 #define CONFIG_SYS_INIT_RAM_LOCK
 435 #define CONFIG_SYS_INIT_RAM_ADDR        0xfdd00000      /* Initial L1 address */
 436 #ifdef CONFIG_PHYS_64BIT
 437 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH      0xf
 438 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW       0xfe03c000
 439 /* The assembler doesn't like typecast */
 440 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
 441         ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
 442           CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
 443 #else
 444 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS   0xfe03c000 /* Initial L1 address */
 445 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0
 446 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS
 447 #endif
 448 #define CONFIG_SYS_INIT_RAM_SIZE                0x00004000
 449
 450 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - \
 451                                         GENERATED_GBL_DATA_SIZE)
 452 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 453
 454 #define CONFIG_SYS_MONITOR_LEN          (768 * 1024)
 455 #define CONFIG_SYS_MALLOC_LEN           (10 * 1024 * 1024)
 456
 457 /* Serial Port */
 458 #define CONFIG_CONS_INDEX       1
 459 #define CONFIG_SYS_NS16550_SERIAL
 460 #define CONFIG_SYS_NS16550_REG_SIZE     1
 461 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
 462
 463 #define CONFIG_SYS_BAUDRATE_TABLE       \
 464         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 465
 466 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
 467 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
 468 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
 469 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
 470
 471 /* Video */
 472 #ifdef CONFIG_ARCH_T1024                /* no DIU on T1023 */
 473 #define CONFIG_FSL_DIU_FB
 474 #ifdef CONFIG_FSL_DIU_FB
 475 #define CONFIG_FSL_DIU_CH7301
 476 #define CONFIG_SYS_DIU_ADDR     (CONFIG_SYS_CCSRBAR + 0x180000)
 477 #define CONFIG_VIDEO_LOGO
 478 #define CONFIG_VIDEO_BMP_LOGO
 479 #define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS
 480 /*
 481  * With CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS, flash I/O is really slow, so
 482  * disable empty flash sector detection, which is I/O-intensive.
 483  */
 484 #undef CONFIG_SYS_FLASH_EMPTY_INFO
 485 #endif
 486 #endif
 487
 488 /* I2C */
 489 #define CONFIG_SYS_I2C
 490 #define CONFIG_SYS_I2C_FSL              /* Use FSL common I2C driver */
 491 #define CONFIG_SYS_FSL_I2C_SPEED        50000   /* I2C speed in Hz */
 492 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 493 #define CONFIG_SYS_FSL_I2C2_SPEED       50000   /* I2C speed in Hz */
 494 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
 495 #define CONFIG_SYS_FSL_I2C_OFFSET       0x118000
 496 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x118100
 497
 498 #define I2C_MUX_PCA_ADDR                0x77
 499 #define I2C_MUX_PCA_ADDR_PRI            0x77 /* Primary Mux*/
 500 #define I2C_MUX_PCA_ADDR_SEC            0x76 /* Secondary multiplexer */
 501 #define I2C_RETIMER_ADDR                0x18
 502
 503 /* I2C bus multiplexer */
 504 #define I2C_MUX_CH_DEFAULT      0x8
 505 #define I2C_MUX_CH_DIU          0xC
 506 #define I2C_MUX_CH5             0xD
 507 #define I2C_MUX_CH7             0xF
 508
 509 /* LDI/DVI Encoder for display */
 510 #define CONFIG_SYS_I2C_LDI_ADDR  0x38
 511 #define CONFIG_SYS_I2C_DVI_ADDR  0x75
 512
 513 /*
 514  * RTC configuration
 515  */
 516 #define RTC
 517 #define CONFIG_RTC_DS3231       1
 518 #define CONFIG_SYS_I2C_RTC_ADDR 0x68
 519
 520 /*
 521  * eSPI - Enhanced SPI
 522  */
 523 #ifndef CONFIG_SPL_BUILD
 524 #endif
 525 #define CONFIG_SPI_FLASH_BAR
 526 #define CONFIG_SF_DEFAULT_SPEED  10000000
 527 #define CONFIG_SF_DEFAULT_MODE    0
 528
 529 /*
 530  * General PCIe
 531  * Memory space is mapped 1-1, but I/O space must start from 0.
 532  */
 533 #define CONFIG_PCIE1            /* PCIE controller 1 */
 534 #define CONFIG_PCIE2            /* PCIE controller 2 */
 535 #define CONFIG_PCIE3            /* PCIE controller 3 */
 536 #define CONFIG_FSL_PCI_INIT     /* Use common FSL init code */
 537 #define CONFIG_SYS_PCI_64BIT    /* enable 64-bit PCI resources */
 538 #define CONFIG_PCI_INDIRECT_BRIDGE
 539
 540 #ifdef CONFIG_PCI
 541 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
 542 #ifdef CONFIG_PCIE1
 543 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
 544 #ifdef CONFIG_PHYS_64BIT
 545 #define CONFIG_SYS_PCIE1_MEM_BUS        0xe0000000
 546 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
 547 #else
 548 #define CONFIG_SYS_PCIE1_MEM_BUS        0x80000000
 549 #define CONFIG_SYS_PCIE1_MEM_PHYS       0x80000000
 550 #endif
 551 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x10000000      /* 256M */
 552 #define CONFIG_SYS_PCIE1_IO_VIRT        0xf8000000
 553 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 554 #ifdef CONFIG_PHYS_64BIT
 555 #define CONFIG_SYS_PCIE1_IO_PHYS        0xff8000000ull
 556 #else
 557 #define CONFIG_SYS_PCIE1_IO_PHYS        0xf8000000
 558 #endif
 559 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 560 #endif
 561
 562 /* controller 2, Slot 2, tgtid 2, Base address 201000 */
 563 #ifdef CONFIG_PCIE2
 564 #define CONFIG_SYS_PCIE2_MEM_VIRT       0x90000000
 565 #ifdef CONFIG_PHYS_64BIT
 566 #define CONFIG_SYS_PCIE2_MEM_BUS        0xe0000000
 567 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc10000000ull
 568 #else
 569 #define CONFIG_SYS_PCIE2_MEM_BUS        0x90000000
 570 #define CONFIG_SYS_PCIE2_MEM_PHYS       0x90000000
 571 #endif
 572 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x10000000      /* 256M */
 573 #define CONFIG_SYS_PCIE2_IO_VIRT        0xf8010000
 574 #define CONFIG_SYS_PCIE2_IO_BUS         0x00000000
 575 #ifdef CONFIG_PHYS_64BIT
 576 #define CONFIG_SYS_PCIE2_IO_PHYS        0xff8010000ull
 577 #else
 578 #define CONFIG_SYS_PCIE2_IO_PHYS        0xf8010000
 579 #endif
 580 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00010000      /* 64k */
 581 #endif
 582
 583 /* controller 3, Slot 1, tgtid 1, Base address 202000 */
 584 #ifdef CONFIG_PCIE3
 585 #define CONFIG_SYS_PCIE3_MEM_VIRT       0xa0000000
 586 #ifdef CONFIG_PHYS_64BIT
 587 #define CONFIG_SYS_PCIE3_MEM_BUS        0xe0000000
 588 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc20000000ull
 589 #else
 590 #define CONFIG_SYS_PCIE3_MEM_BUS        0xa0000000
 591 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xa0000000
 592 #endif
 593 #define CONFIG_SYS_PCIE3_MEM_SIZE       0x10000000      /* 256M */
 594 #define CONFIG_SYS_PCIE3_IO_VIRT        0xf8020000
 595 #define CONFIG_SYS_PCIE3_IO_BUS         0x00000000
 596 #ifdef CONFIG_PHYS_64BIT
 597 #define CONFIG_SYS_PCIE3_IO_PHYS        0xff8020000ull
 598 #else
 599 #define CONFIG_SYS_PCIE3_IO_PHYS        0xf8020000
 600 #endif
 601 #define CONFIG_SYS_PCIE3_IO_SIZE        0x00010000      /* 64k */
 602 #endif
 603
 604 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 605 #endif  /* CONFIG_PCI */
 606
 607 /*
 608  *SATA
 609  */
 610 #define CONFIG_FSL_SATA_V2
 611 #ifdef CONFIG_FSL_SATA_V2
 612 #define CONFIG_SYS_SATA_MAX_DEVICE      1
 613 #define CONFIG_SATA1
 614 #define CONFIG_SYS_SATA1                CONFIG_SYS_MPC85xx_SATA1_ADDR
 615 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
 616 #define CONFIG_LBA48
 617 #endif
 618
 619 /*
 620  * USB
 621  */
 622 #define CONFIG_HAS_FSL_DR_USB
 623
 624 #ifdef CONFIG_HAS_FSL_DR_USB
 625 #define CONFIG_USB_EHCI_FSL
 626 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 627 #endif
 628
 629 /*
 630  * SDHC
 631  */
 632 #ifdef CONFIG_MMC
 633 #define CONFIG_FSL_ESDHC
 634 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 635 #endif
 636
 637 /* Qman/Bman */
 638 #ifndef CONFIG_NOBQFMAN
 639 #define CONFIG_SYS_BMAN_NUM_PORTALS     10
 640 #define CONFIG_SYS_BMAN_MEM_BASE        0xf4000000
 641 #ifdef CONFIG_PHYS_64BIT
 642 #define CONFIG_SYS_BMAN_MEM_PHYS        0xff4000000ull
 643 #else
 644 #define CONFIG_SYS_BMAN_MEM_PHYS        CONFIG_SYS_BMAN_MEM_BASE
 645 #endif
 646 #define CONFIG_SYS_BMAN_MEM_SIZE        0x02000000
 647 #define CONFIG_SYS_BMAN_SP_CENA_SIZE    0x4000
 648 #define CONFIG_SYS_BMAN_SP_CINH_SIZE    0x1000
 649 #define CONFIG_SYS_BMAN_CENA_BASE       CONFIG_SYS_BMAN_MEM_BASE
 650 #define CONFIG_SYS_BMAN_CENA_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 651 #define CONFIG_SYS_BMAN_CINH_BASE       (CONFIG_SYS_BMAN_MEM_BASE + \
 652                                         CONFIG_SYS_BMAN_CENA_SIZE)
 653 #define CONFIG_SYS_BMAN_CINH_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 654 #define CONFIG_SYS_BMAN_SWP_ISDR_REG    0xE08
 655 #define CONFIG_SYS_QMAN_NUM_PORTALS     10
 656 #define CONFIG_SYS_QMAN_MEM_BASE        0xf6000000
 657 #ifdef CONFIG_PHYS_64BIT
 658 #define CONFIG_SYS_QMAN_MEM_PHYS        0xff6000000ull
 659 #else
 660 #define CONFIG_SYS_QMAN_MEM_PHYS        CONFIG_SYS_QMAN_MEM_BASE
 661 #endif
 662 #define CONFIG_SYS_QMAN_MEM_SIZE        0x02000000
 663 #define CONFIG_SYS_QMAN_SP_CENA_SIZE    0x4000
 664 #define CONFIG_SYS_QMAN_SP_CINH_SIZE    0x1000
 665 #define CONFIG_SYS_QMAN_CENA_BASE       CONFIG_SYS_QMAN_MEM_BASE
 666 #define CONFIG_SYS_QMAN_CENA_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 667 #define CONFIG_SYS_QMAN_CINH_BASE       (CONFIG_SYS_QMAN_MEM_BASE + \
 668                                         CONFIG_SYS_QMAN_CENA_SIZE)
 669 #define CONFIG_SYS_QMAN_CINH_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 670 #define CONFIG_SYS_QMAN_SWP_ISDR_REG    0xE08
 671
 672 #define CONFIG_SYS_DPAA_FMAN
 673
 674 #define CONFIG_QE
 675 #define CONFIG_U_QE
 676 /* Default address of microcode for the Linux FMan driver */
 677 #if defined(CONFIG_SPIFLASH)
 678 /*
 679  * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
 680  * env, so we got 0x110000.
 681  */
 682 #define CONFIG_SYS_QE_FW_IN_SPIFLASH
 683 #define CONFIG_SYS_FMAN_FW_ADDR 0x110000
 684 #define CONFIG_SYS_QE_FW_ADDR   0x130000
 685 #elif defined(CONFIG_SDCARD)
 686 /*
 687  * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
 688  * about 1MB (2048 blocks), Env is stored after the image, and the env size is
 689  * 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 2080(0x820).
 690  */
 691 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC
 692 #define CONFIG_SYS_FMAN_FW_ADDR         (512 * 0x820)
 693 #define CONFIG_SYS_QE_FW_ADDR           (512 * 0x920)
 694 #elif defined(CONFIG_NAND)
 695 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND
 696 #define CONFIG_SYS_FMAN_FW_ADDR         (11 * CONFIG_SYS_NAND_BLOCK_SIZE)
 697 #define CONFIG_SYS_QE_FW_ADDR           (12 * CONFIG_SYS_NAND_BLOCK_SIZE)
 698 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
 699 /*
 700  * Slave has no ucode locally, it can fetch this from remote. When implementing
 701  * in two corenet boards, slave's ucode could be stored in master's memory
 702  * space, the address can be mapped from slave TLB->slave LAW->
 703  * slave SRIO or PCIE outbound window->master inbound window->
 704  * master LAW->the ucode address in master's memory space.
 705  */
 706 #define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE
 707 #define CONFIG_SYS_FMAN_FW_ADDR 0xFFE00000
 708 #else
 709 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
 710 #define CONFIG_SYS_FMAN_FW_ADDR         0xEFF00000
 711 #define CONFIG_SYS_QE_FW_ADDR           0xEFE00000
 712 #endif
 713 #define CONFIG_SYS_QE_FMAN_FW_LENGTH    0x10000
 714 #define CONFIG_SYS_FDT_PAD              (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 715 #endif /* CONFIG_NOBQFMAN */
 716
 717 #ifdef CONFIG_SYS_DPAA_FMAN
 718 #define CONFIG_FMAN_ENET
 719 #define CONFIG_PHYLIB_10G
 720 #define CONFIG_PHY_VITESSE
 721 #define CONFIG_PHY_REALTEK
 722 #define CONFIG_PHY_TERANETICS
 723 #define RGMII_PHY1_ADDR         0x1
 724 #define RGMII_PHY2_ADDR         0x2
 725 #define SGMII_CARD_AQ_PHY_ADDR_S3 0x3
 726 #define SGMII_CARD_AQ_PHY_ADDR_S4 0x4
 727 #define SGMII_CARD_AQ_PHY_ADDR_S5 0x5
 728 #define SGMII_CARD_PORT1_PHY_ADDR 0x1C
 729 #define SGMII_CARD_PORT2_PHY_ADDR 0x1D
 730 #define SGMII_CARD_PORT3_PHY_ADDR 0x1E
 731 #define SGMII_CARD_PORT4_PHY_ADDR 0x1F
 732 #endif
 733
 734 #ifdef CONFIG_FMAN_ENET
 735 #define CONFIG_MII              /* MII PHY management */
 736 #define CONFIG_ETHPRIME         "FM1@DTSEC4"
 737 #endif
 738
 739 /*
 740  * Dynamic MTD Partition support with mtdparts
 741  */
 742 #ifdef CONFIG_MTD_NOR_FLASH
 743 #define CONFIG_MTD_DEVICE
 744 #define CONFIG_MTD_PARTITIONS
 745 #define CONFIG_FLASH_CFI_MTD
 746 #endif
 747
 748 /*
 749  * Environment
 750  */
 751 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
 752 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 753
 754 /*
 755  * Miscellaneous configurable options
 756  */
 757 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 758 #define CONFIG_CMDLINE_EDITING                  /* Command-line editing */
 759 #define CONFIG_AUTO_COMPLETE                    /* add autocompletion support */
 760 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 761
 762 /*
 763  * For booting Linux, the board info and command line data
 764  * have to be in the first 64 MB of memory, since this is
 765  * the maximum mapped by the Linux kernel during initialization.
 766  */
 767 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial map for Linux*/
 768 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 769
 770 #ifdef CONFIG_CMD_KGDB
 771 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 772 #endif
 773
 774 /*
 775  * Environment Configuration
 776  */
 777 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 778 #define CONFIG_BOOTFILE         "uImage"
 779 #define CONFIG_UBOOTPATH        "u-boot.bin" /* U-Boot image on TFTP server */
 780 #define CONFIG_LOADADDR         1000000 /* default location for tftp, bootm */
 781 #define __USB_PHY_TYPE          utmi
 782
 783 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 784         "hwconfig=fsl_ddr:ctlr_intlv=cacheline,bank_intlv=cs0_cs1;\0"  \
 785         "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0" \
 786         "bootargs=root=/dev/ram rw console=ttyS0,115200\0" \
 787         "ramdiskfile=t1024qds/ramdisk.uboot\0"                  \
 788         "fdtfile=t1024qds/t1024qds.dtb\0"                       \
 789         "netdev=eth0\0"                                         \
 790         "video-mode=fslfb:1024x768-32@60,monitor=dvi\0"         \
 791         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"             \
 792         "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"     \
 793         "tftpflash=tftpboot $loadaddr $uboot && "               \
 794         "protect off $ubootaddr +$filesize && "                 \
 795         "erase $ubootaddr +$filesize && "                       \
 796         "cp.b $loadaddr $ubootaddr $filesize && "               \
 797         "protect on $ubootaddr +$filesize && "                  \
 798         "cmp.b $loadaddr $ubootaddr $filesize\0"                \
 799         "consoledev=ttyS0\0"                                    \
 800         "ramdiskaddr=2000000\0"                                 \
 801         "fdtaddr=d00000\0"                                      \
 802         "bdev=sda3\0"
 803
 804 #define CONFIG_LINUX                                    \
 805         "setenv bootargs root=/dev/ram rw "             \
 806         "console=$consoledev,$baudrate $othbootargs;"   \
 807         "setenv ramdiskaddr 0x02000000;"                \
 808         "setenv fdtaddr 0x00c00000;"                    \
 809         "setenv loadaddr 0x1000000;"                    \
 810         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 811
 812 #define CONFIG_NFSBOOTCOMMAND                   \
 813         "setenv bootargs root=/dev/nfs rw "     \
 814         "nfsroot=$serverip:$rootpath "          \
 815         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 816         "console=$consoledev,$baudrate $othbootargs;"   \
 817         "tftp $loadaddr $bootfile;"             \
 818         "tftp $fdtaddr $fdtfile;"               \
 819         "bootm $loadaddr - $fdtaddr"
 820
 821 #define CONFIG_BOOTCOMMAND      CONFIG_LINUX
 822
 823 #include <asm/fsl_secure_boot.h>
 824
 825 #endif  /* __T1024QDS_H */