include/configs/T102xQDS.h

   1 /*
   2  * Copyright 2014 Freescale Semiconductor, Inc.
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 /*
   8  * T1024/T1023 QDS board configuration file
   9  */
  10
  11 #ifndef __T1024QDS_H
  12 #define __T1024QDS_H
  13
  14 /* High Level Configuration Options */
  15 #define CONFIG_SYS_GENERIC_BOARD
  16 #define CONFIG_DISPLAY_BOARDINFO
  17 #define CONFIG_BOOKE
  18 #define CONFIG_E500                     /* BOOKE e500 family */
  19 #define CONFIG_E500MC                   /* BOOKE e500mc family */
  20 #define CONFIG_SYS_BOOK3E_HV            /* Category E.HV supported */
  21 #define CONFIG_MP                       /* support multiple processors */
  22 #define CONFIG_PHYS_64BIT
  23 #define CONFIG_ENABLE_36BIT_PHYS
  24
  25 #ifdef CONFIG_PHYS_64BIT
  26 #define CONFIG_ADDR_MAP         1
  27 #define CONFIG_SYS_NUM_ADDR_MAP 64      /* number of TLB1 entries */
  28 #endif
  29
  30 #define CONFIG_SYS_FSL_CPC              /* Corenet Platform Cache */
  31 #define CONFIG_SYS_NUM_CPC              CONFIG_NUM_DDR_CONTROLLERS
  32 #define CONFIG_FSL_IFC                  /* Enable IFC Support */
  33
  34 #define CONFIG_FSL_LAW                  /* Use common FSL init code */
  35 #define CONFIG_ENV_OVERWRITE
  36
  37 #define CONFIG_DEEP_SLEEP
  38 #if defined(CONFIG_DEEP_SLEEP)
  39 #define CONFIG_SILENT_CONSOLE
  40 #define CONFIG_BOARD_EARLY_INIT_F
  41 #endif
  42
  43 #ifdef CONFIG_RAMBOOT_PBL
  44 #define CONFIG_SYS_FSL_PBL_PBI board/freescale/t102xqds/t1024_pbi.cfg
  45 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xqds/t1024_rcw.cfg
  46 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
  47 #define CONFIG_SPL_ENV_SUPPORT
  48 #define CONFIG_SPL_SERIAL_SUPPORT
  49 #define CONFIG_SPL_FLUSH_IMAGE
  50 #define CONFIG_SPL_TARGET               "u-boot-with-spl.bin"
  51 #define CONFIG_SPL_LIBGENERIC_SUPPORT
  52 #define CONFIG_SPL_LIBCOMMON_SUPPORT
  53 #define CONFIG_SPL_I2C_SUPPORT
  54 #define CONFIG_SPL_DRIVERS_MISC_SUPPORT
  55 #define CONFIG_FSL_LAW                  /* Use common FSL init code */
  56 #define CONFIG_SYS_TEXT_BASE            0x00201000
  57 #define CONFIG_SPL_TEXT_BASE            0xFFFD8000
  58 #define CONFIG_SPL_PAD_TO               0x40000
  59 #define CONFIG_SPL_MAX_SIZE             0x28000
  60 #define RESET_VECTOR_OFFSET             0x27FFC
  61 #define BOOT_PAGE_OFFSET                0x27000
  62 #ifdef CONFIG_SPL_BUILD
  63 #define CONFIG_SPL_SKIP_RELOCATE
  64 #define CONFIG_SPL_COMMON_INIT_DDR
  65 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
  66 #define CONFIG_SYS_NO_FLASH
  67 #endif
  68
  69 #ifdef CONFIG_NAND
  70 #define CONFIG_SPL_NAND_SUPPORT
  71 #define CONFIG_SYS_NAND_U_BOOT_SIZE     (768 << 10)
  72 #define CONFIG_SYS_NAND_U_BOOT_DST      0x00200000
  73 #define CONFIG_SYS_NAND_U_BOOT_START    0x00200000
  74 #define CONFIG_SYS_NAND_U_BOOT_OFFS     (256 << 10)
  75 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
  76 #define CONFIG_SPL_NAND_BOOT
  77 #endif
  78
  79 #ifdef CONFIG_SPIFLASH
  80 #define CONFIG_RESET_VECTOR_ADDRESS             0x200FFC
  81 #define CONFIG_SPL_SPI_SUPPORT
  82 #define CONFIG_SPL_SPI_FLASH_SUPPORT
  83 #define CONFIG_SPL_SPI_FLASH_MINIMAL
  84 #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE        (768 << 10)
  85 #define CONFIG_SYS_SPI_FLASH_U_BOOT_DST         (0x00200000)
  86 #define CONFIG_SYS_SPI_FLASH_U_BOOT_START       (0x00200000)
  87 #define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS        (256 << 10)
  88 #define CONFIG_SYS_LDSCRIPT             "arch/powerpc/cpu/mpc85xx/u-boot.lds"
  89 #ifndef CONFIG_SPL_BUILD
  90 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
  91 #endif
  92 #define CONFIG_SPL_SPI_BOOT
  93 #endif
  94
  95 #ifdef CONFIG_SDCARD
  96 #define CONFIG_RESET_VECTOR_ADDRESS             0x200FFC
  97 #define CONFIG_SPL_MMC_SUPPORT
  98 #define CONFIG_SPL_MMC_MINIMAL
  99 #define CONFIG_SYS_MMC_U_BOOT_SIZE      (768 << 10)
 100 #define CONFIG_SYS_MMC_U_BOOT_DST       (0x00200000)
 101 #define CONFIG_SYS_MMC_U_BOOT_START     (0x00200000)
 102 #define CONFIG_SYS_MMC_U_BOOT_OFFS      (260 << 10)
 103 #define CONFIG_SYS_LDSCRIPT             "arch/powerpc/cpu/mpc85xx/u-boot.lds"
 104 #ifndef CONFIG_SPL_BUILD
 105 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
 106 #endif
 107 #define CONFIG_SPL_MMC_BOOT
 108 #endif
 109
 110 #endif /* CONFIG_RAMBOOT_PBL */
 111
 112 #ifndef CONFIG_SYS_TEXT_BASE
 113 #define CONFIG_SYS_TEXT_BASE    0xeff40000
 114 #endif
 115
 116 #ifndef CONFIG_RESET_VECTOR_ADDRESS
 117 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
 118 #endif
 119
 120 #ifndef CONFIG_SYS_NO_FLASH
 121 #define CONFIG_FLASH_CFI_DRIVER
 122 #define CONFIG_SYS_FLASH_CFI
 123 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 124 #endif
 125
 126 /* PCIe Boot - Master */
 127 #define CONFIG_SRIO_PCIE_BOOT_MASTER
 128 /*
 129  * for slave u-boot IMAGE instored in master memory space,
 130  * PHYS must be aligned based on the SIZE
 131  */
 132 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff00000ull
 133 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE     0x100000 /* 1M */
 134 #ifdef CONFIG_PHYS_64BIT
 135 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef200000ull
 136 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff00000ull
 137 #else
 138 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xef200000
 139 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0xfff00000
 140 #endif
 141 /*
 142  * for slave UCODE and ENV instored in master memory space,
 143  * PHYS must be aligned based on the SIZE
 144  */
 145 #ifdef CONFIG_PHYS_64BIT
 146 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef100000ull
 147 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS  0x3ffe00000ull
 148 #else
 149 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xef100000
 150 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS  0xffe00000
 151 #endif
 152 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE     0x40000 /* 256K */
 153 /* slave core release by master*/
 154 #define CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET 0xe00e4
 155 #define CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK 0x00000001 /* release core 0 */
 156
 157 /* PCIe Boot - Slave */
 158 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
 159 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR 0xFFE00000
 160 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS \
 161                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR)
 162 /* Set 1M boot space for PCIe boot */
 163 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_SYS_TEXT_BASE & 0xfff00000)
 164 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS       \
 165                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR)
 166 #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc
 167 #define CONFIG_SYS_NO_FLASH
 168 #endif
 169
 170 #if defined(CONFIG_SPIFLASH)
 171 #define CONFIG_SYS_EXTRA_ENV_RELOC
 172 #define CONFIG_ENV_IS_IN_SPI_FLASH
 173 #define CONFIG_ENV_SPI_BUS              0
 174 #define CONFIG_ENV_SPI_CS               0
 175 #define CONFIG_ENV_SPI_MAX_HZ           10000000
 176 #define CONFIG_ENV_SPI_MODE             0
 177 #define CONFIG_ENV_SIZE                 0x2000          /* 8KB */
 178 #define CONFIG_ENV_OFFSET               0x100000        /* 1MB */
 179 #define CONFIG_ENV_SECT_SIZE            0x10000
 180 #elif defined(CONFIG_SDCARD)
 181 #define CONFIG_SYS_EXTRA_ENV_RELOC
 182 #define CONFIG_ENV_IS_IN_MMC
 183 #define CONFIG_SYS_MMC_ENV_DEV          0
 184 #define CONFIG_ENV_SIZE                 0x2000
 185 #define CONFIG_ENV_OFFSET               (512 * 0x800)
 186 #elif defined(CONFIG_NAND)
 187 #define CONFIG_SYS_EXTRA_ENV_RELOC
 188 #define CONFIG_ENV_IS_IN_NAND
 189 #define CONFIG_ENV_SIZE                 0x2000
 190 #define CONFIG_ENV_OFFSET               (10 * CONFIG_SYS_NAND_BLOCK_SIZE)
 191 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
 192 #define CONFIG_ENV_IS_IN_REMOTE
 193 #define CONFIG_ENV_ADDR         0xffe20000
 194 #define CONFIG_ENV_SIZE         0x2000
 195 #elif defined(CONFIG_ENV_IS_NOWHERE)
 196 #define CONFIG_ENV_SIZE         0x2000
 197 #else
 198 #define CONFIG_ENV_IS_IN_FLASH
 199 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 200 #define CONFIG_ENV_SIZE         0x2000
 201 #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
 202 #endif
 203
 204
 205 #ifndef __ASSEMBLY__
 206 unsigned long get_board_sys_clk(void);
 207 unsigned long get_board_ddr_clk(void);
 208 #endif
 209
 210 #define CONFIG_SYS_CLK_FREQ     get_board_sys_clk()
 211 #define CONFIG_DDR_CLK_FREQ     get_board_ddr_clk()
 212
 213 /*
 214  * These can be toggled for performance analysis, otherwise use default.
 215  */
 216 #define CONFIG_SYS_CACHE_STASHING
 217 #define CONFIG_BACKSIDE_L2_CACHE
 218 #define CONFIG_SYS_INIT_L2CSR0          L2CSR0_L2E
 219 #define CONFIG_BTB                      /* toggle branch predition */
 220 #define CONFIG_DDR_ECC
 221 #ifdef CONFIG_DDR_ECC
 222 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
 223 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
 224 #endif
 225
 226 #define CONFIG_SYS_MEMTEST_START        0x00200000 /* memtest works on */
 227 #define CONFIG_SYS_MEMTEST_END          0x00400000
 228 #define CONFIG_SYS_ALT_MEMTEST
 229 #define CONFIG_PANIC_HANG       /* do not reset board on panic */
 230
 231 /*
 232  *  Config the L3 Cache as L3 SRAM
 233  */
 234 #define CONFIG_SYS_INIT_L3_ADDR         0xFFFC0000
 235 #define CONFIG_SYS_L3_SIZE              (256 << 10)
 236 #define CONFIG_SPL_GD_ADDR              (CONFIG_SYS_INIT_L3_ADDR + 32 * 1024)
 237 #ifdef CONFIG_RAMBOOT_PBL
 238 #define CONFIG_ENV_ADDR                 (CONFIG_SPL_GD_ADDR + 4 * 1024)
 239 #endif
 240 #define CONFIG_SPL_RELOC_MALLOC_ADDR    (CONFIG_SPL_GD_ADDR + 12 * 1024)
 241 #define CONFIG_SPL_RELOC_MALLOC_SIZE    (30 << 10)
 242 #define CONFIG_SPL_RELOC_STACK          (CONFIG_SPL_GD_ADDR + 64 * 1024)
 243 #define CONFIG_SPL_RELOC_STACK_SIZE     (22 << 10)
 244
 245 #ifdef CONFIG_PHYS_64BIT
 246 #define CONFIG_SYS_DCSRBAR              0xf0000000
 247 #define CONFIG_SYS_DCSRBAR_PHYS         0xf00000000ull
 248 #endif
 249
 250 /* EEPROM */
 251 #define CONFIG_ID_EEPROM
 252 #define CONFIG_SYS_I2C_EEPROM_NXID
 253 #define CONFIG_SYS_EEPROM_BUS_NUM       0
 254 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x57
 255 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  1
 256 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
 257 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
 258
 259 /*
 260  * DDR Setup
 261  */
 262 #define CONFIG_VERY_BIG_RAM
 263 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 264 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 265 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 266 #define CONFIG_CHIP_SELECTS_PER_CTRL    (4 * CONFIG_DIMM_SLOTS_PER_CTLR)
 267 #define CONFIG_DDR_SPD
 268 #ifndef CONFIG_SYS_FSL_DDR4
 269 #define CONFIG_SYS_FSL_DDR3
 270 #endif
 271
 272 #define CONFIG_SYS_SPD_BUS_NUM  0
 273 #define SPD_EEPROM_ADDRESS      0x51
 274
 275 #define CONFIG_SYS_SDRAM_SIZE   4096    /* for fixed parameter use */
 276
 277 /*
 278  * IFC Definitions
 279  */
 280 #define CONFIG_SYS_FLASH_BASE   0xe0000000
 281 #ifdef CONFIG_PHYS_64BIT
 282 #define CONFIG_SYS_FLASH_BASE_PHYS      (0xf00000000ull | CONFIG_SYS_FLASH_BASE)
 283 #else
 284 #define CONFIG_SYS_FLASH_BASE_PHYS      CONFIG_SYS_FLASH_BASE
 285 #endif
 286
 287 #define CONFIG_SYS_NOR0_CSPR_EXT        (0xf)
 288 #define CONFIG_SYS_NOR0_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \
 289                                 + 0x8000000) | \
 290                                 CSPR_PORT_SIZE_16 | \
 291                                 CSPR_MSEL_NOR | \
 292                                 CSPR_V)
 293 #define CONFIG_SYS_NOR1_CSPR_EXT        (0xf)
 294 #define CONFIG_SYS_NOR1_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
 295                                 CSPR_PORT_SIZE_16 | \
 296                                 CSPR_MSEL_NOR | \
 297                                 CSPR_V)
 298 #define CONFIG_SYS_NOR_AMASK    IFC_AMASK(128*1024*1024)
 299 /* NOR Flash Timing Params */
 300 #define CONFIG_SYS_NOR_CSOR     CSOR_NAND_TRHZ_80
 301 #define CONFIG_SYS_NOR_FTIM0    (FTIM0_NOR_TACSE(0x4) | \
 302                                 FTIM0_NOR_TEADC(0x5) | \
 303                                 FTIM0_NOR_TEAHC(0x5))
 304 #define CONFIG_SYS_NOR_FTIM1    (FTIM1_NOR_TACO(0x35) | \
 305                                 FTIM1_NOR_TRAD_NOR(0x1A) |\
 306                                 FTIM1_NOR_TSEQRAD_NOR(0x13))
 307 #define CONFIG_SYS_NOR_FTIM2    (FTIM2_NOR_TCS(0x4) | \
 308                                 FTIM2_NOR_TCH(0x4) | \
 309                                 FTIM2_NOR_TWPH(0x0E) | \
 310                                 FTIM2_NOR_TWP(0x1c))
 311 #define CONFIG_SYS_NOR_FTIM3    0x0
 312
 313 #define CONFIG_SYS_FLASH_QUIET_TEST
 314 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
 315
 316 #define CONFIG_SYS_MAX_FLASH_BANKS      2       /* number of banks */
 317 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device */
 318 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 319 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 320
 321 #define CONFIG_SYS_FLASH_EMPTY_INFO
 322 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS \
 323                                         + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS}
 324 #define CONFIG_FSL_QIXIS        /* use common QIXIS code */
 325 #define QIXIS_BASE              0xffdf0000
 326 #ifdef CONFIG_PHYS_64BIT
 327 #define QIXIS_BASE_PHYS         (0xf00000000ull | QIXIS_BASE)
 328 #else
 329 #define QIXIS_BASE_PHYS         QIXIS_BASE
 330 #endif
 331 #define QIXIS_LBMAP_SWITCH              0x06
 332 #define QIXIS_LBMAP_MASK                0x0f
 333 #define QIXIS_LBMAP_SHIFT               0
 334 #define QIXIS_LBMAP_DFLTBANK            0x00
 335 #define QIXIS_LBMAP_ALTBANK             0x04
 336 #define QIXIS_RST_CTL_RESET             0x31
 337 #define QIXIS_RCFG_CTL_RECONFIG_IDLE    0x20
 338 #define QIXIS_RCFG_CTL_RECONFIG_START   0x21
 339 #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE   0x08
 340 #define QIXIS_RST_FORCE_MEM             0x01
 341
 342 #define CONFIG_SYS_CSPR3_EXT    (0xf)
 343 #define CONFIG_SYS_CSPR3        (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) \
 344                                 | CSPR_PORT_SIZE_8 \
 345                                 | CSPR_MSEL_GPCM \
 346                                 | CSPR_V)
 347 #define CONFIG_SYS_AMASK3       IFC_AMASK(4*1024)
 348 #define CONFIG_SYS_CSOR3        0x0
 349 /* QIXIS Timing parameters for IFC CS3 */
 350 #define CONFIG_SYS_CS3_FTIM0            (FTIM0_GPCM_TACSE(0x0e) | \
 351                                         FTIM0_GPCM_TEADC(0x0e) | \
 352                                         FTIM0_GPCM_TEAHC(0x0e))
 353 #define CONFIG_SYS_CS3_FTIM1            (FTIM1_GPCM_TACO(0xff) | \
 354                                         FTIM1_GPCM_TRAD(0x3f))
 355 #define CONFIG_SYS_CS3_FTIM2            (FTIM2_GPCM_TCS(0x0e) | \
 356                                         FTIM2_GPCM_TCH(0x8) | \
 357                                         FTIM2_GPCM_TWP(0x1f))
 358 #define CONFIG_SYS_CS3_FTIM3            0x0
 359
 360 #define CONFIG_NAND_FSL_IFC
 361 #define CONFIG_SYS_NAND_BASE            0xff800000
 362 #ifdef CONFIG_PHYS_64BIT
 363 #define CONFIG_SYS_NAND_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_NAND_BASE)
 364 #else
 365 #define CONFIG_SYS_NAND_BASE_PHYS       CONFIG_SYS_NAND_BASE
 366 #endif
 367 #define CONFIG_SYS_NAND_CSPR_EXT        (0xf)
 368 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 369                                 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
 370                                 | CSPR_MSEL_NAND        /* MSEL = NAND */ \
 371                                 | CSPR_V)
 372 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64*1024)
 373
 374 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 375                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 376                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
 377                                 | CSOR_NAND_RAL_3       /* RAL = 3Byes */ \
 378                                 | CSOR_NAND_PGS_2K      /* Page Size = 2K */ \
 379                                 | CSOR_NAND_SPRZ_64/* Spare size = 64 */ \
 380                                 | CSOR_NAND_PB(64))     /*Pages Per Block = 64*/
 381
 382 #define CONFIG_SYS_NAND_ONFI_DETECTION
 383
 384 /* ONFI NAND Flash mode0 Timing Params */
 385 #define CONFIG_SYS_NAND_FTIM0           (FTIM0_NAND_TCCST(0x07) | \
 386                                         FTIM0_NAND_TWP(0x18)   | \
 387                                         FTIM0_NAND_TWCHT(0x07) | \
 388                                         FTIM0_NAND_TWH(0x0a))
 389 #define CONFIG_SYS_NAND_FTIM1           (FTIM1_NAND_TADLE(0x32) | \
 390                                         FTIM1_NAND_TWBE(0x39)  | \
 391                                         FTIM1_NAND_TRR(0x0e)   | \
 392                                         FTIM1_NAND_TRP(0x18))
 393 #define CONFIG_SYS_NAND_FTIM2           (FTIM2_NAND_TRAD(0x0f) | \
 394                                         FTIM2_NAND_TREH(0x0a) | \
 395                                         FTIM2_NAND_TWHRE(0x1e))
 396 #define CONFIG_SYS_NAND_FTIM3           0x0
 397
 398 #define CONFIG_SYS_NAND_DDR_LAW         11
 399 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
 400 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 401 #define CONFIG_CMD_NAND
 402
 403 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128 * 1024)
 404
 405 #if defined(CONFIG_NAND)
 406 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NAND_CSPR_EXT
 407 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
 408 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
 409 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
 410 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
 411 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
 412 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
 413 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
 414 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 415 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR0_CSPR
 416 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
 417 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 418 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 419 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 420 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 421 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 422 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NOR1_CSPR_EXT
 423 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NOR1_CSPR
 424 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NOR_AMASK
 425 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NOR_CSOR
 426 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NOR_FTIM0
 427 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NOR_FTIM1
 428 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NOR_FTIM2
 429 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NOR_FTIM3
 430 #else
 431 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 432 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR0_CSPR
 433 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 434 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 435 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 436 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 437 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 438 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 439 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR1_CSPR_EXT
 440 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR1_CSPR
 441 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
 442 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 443 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 444 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 445 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 446 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 447 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NAND_CSPR_EXT
 448 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NAND_CSPR
 449 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NAND_AMASK
 450 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NAND_CSOR
 451 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NAND_FTIM0
 452 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NAND_FTIM1
 453 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NAND_FTIM2
 454 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NAND_FTIM3
 455 #endif
 456
 457 #ifdef CONFIG_SPL_BUILD
 458 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SPL_TEXT_BASE
 459 #else
 460 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_TEXT_BASE
 461 #endif
 462
 463 #if defined(CONFIG_RAMBOOT_PBL)
 464 #define CONFIG_SYS_RAMBOOT
 465 #endif
 466
 467 #define CONFIG_BOARD_EARLY_INIT_R
 468 #define CONFIG_MISC_INIT_R
 469
 470 #define CONFIG_HWCONFIG
 471
 472 /* define to use L1 as initial stack */
 473 #define CONFIG_L1_INIT_RAM
 474 #define CONFIG_SYS_INIT_RAM_LOCK
 475 #define CONFIG_SYS_INIT_RAM_ADDR        0xfdd00000      /* Initial L1 address */
 476 #ifdef CONFIG_PHYS_64BIT
 477 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH      0xf
 478 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW       0xfe0ec000
 479 /* The assembler doesn't like typecast */
 480 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
 481         ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
 482           CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
 483 #else
 484 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS   0xfe0ec000 /* Initial L1 address */
 485 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0
 486 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS
 487 #endif
 488 #define CONFIG_SYS_INIT_RAM_SIZE                0x00004000
 489
 490 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - \
 491                                         GENERATED_GBL_DATA_SIZE)
 492 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 493
 494 #define CONFIG_SYS_MONITOR_LEN          (768 * 1024)
 495 #define CONFIG_SYS_MALLOC_LEN           (10 * 1024 * 1024)
 496
 497 /* Serial Port */
 498 #define CONFIG_CONS_INDEX       1
 499 #define CONFIG_SYS_NS16550
 500 #define CONFIG_SYS_NS16550_SERIAL
 501 #define CONFIG_SYS_NS16550_REG_SIZE     1
 502 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
 503
 504 #define CONFIG_SYS_BAUDRATE_TABLE       \
 505         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 506
 507 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
 508 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
 509 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
 510 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
 511 #define CONFIG_SYS_CONSOLE_IS_IN_ENV    /* determine from environment */
 512
 513 /* Use the HUSH parser */
 514 #define CONFIG_SYS_HUSH_PARSER
 515 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
 516
 517 /* Video */
 518 #ifdef CONFIG_PPC_T1024         /* no DIU on T1023 */
 519 #define CONFIG_FSL_DIU_FB
 520 #ifdef CONFIG_FSL_DIU_FB
 521 #define CONFIG_FSL_DIU_CH7301
 522 #define CONFIG_SYS_DIU_ADDR     (CONFIG_SYS_CCSRBAR + 0x180000)
 523 #define CONFIG_VIDEO
 524 #define CONFIG_CMD_BMP
 525 #define CONFIG_CFB_CONSOLE
 526 #define CONFIG_VIDEO_SW_CURSOR
 527 #define CONFIG_VGA_AS_SINGLE_DEVICE
 528 #define CONFIG_VIDEO_LOGO
 529 #define CONFIG_VIDEO_BMP_LOGO
 530 #define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS
 531 /*
 532  * With CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS, flash I/O is really slow, so
 533  * disable empty flash sector detection, which is I/O-intensive.
 534  */
 535 #undef CONFIG_SYS_FLASH_EMPTY_INFO
 536 #endif
 537 #endif
 538
 539 /* pass open firmware flat tree */
 540 #define CONFIG_OF_LIBFDT
 541 #define CONFIG_OF_BOARD_SETUP
 542 #define CONFIG_OF_STDOUT_VIA_ALIAS
 543
 544 /* new uImage format support */
 545 #define CONFIG_FIT
 546 #define CONFIG_FIT_VERBOSE      /* enable fit_format_{error,warning}() */
 547
 548 /* I2C */
 549 #define CONFIG_SYS_I2C
 550 #define CONFIG_SYS_I2C_FSL              /* Use FSL common I2C driver */
 551 #define CONFIG_SYS_FSL_I2C_SPEED        50000   /* I2C speed in Hz */
 552 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 553 #define CONFIG_SYS_FSL_I2C2_SPEED       50000   /* I2C speed in Hz */
 554 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
 555 #define CONFIG_SYS_FSL_I2C_OFFSET       0x118000
 556 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x118100
 557
 558 #define I2C_MUX_PCA_ADDR                0x77
 559 #define I2C_MUX_PCA_ADDR_PRI            0x77 /* Primary Mux*/
 560 #define I2C_MUX_PCA_ADDR_SEC            0x76 /* Secondary multiplexer */
 561 #define I2C_RETIMER_ADDR                0x18
 562
 563 /* I2C bus multiplexer */
 564 #define I2C_MUX_CH_DEFAULT      0x8
 565 #define I2C_MUX_CH_DIU          0xC
 566 #define I2C_MUX_CH5             0xD
 567 #define I2C_MUX_CH7             0xF
 568
 569 /* LDI/DVI Encoder for display */
 570 #define CONFIG_SYS_I2C_LDI_ADDR  0x38
 571 #define CONFIG_SYS_I2C_DVI_ADDR  0x75
 572
 573 /*
 574  * RTC configuration
 575  */
 576 #define RTC
 577 #define CONFIG_RTC_DS3231       1
 578 #define CONFIG_SYS_I2C_RTC_ADDR 0x68
 579
 580 /*
 581  * eSPI - Enhanced SPI
 582  */
 583 #define CONFIG_FSL_ESPI
 584 #define CONFIG_SPI_FLASH_STMICRO
 585 #ifndef CONFIG_SPL_BUILD
 586 #define CONFIG_SPI_FLASH_SST
 587 #define CONFIG_SPI_FLASH_EON
 588 #endif
 589 #define CONFIG_CMD_SF
 590 #define CONFIG_SPI_FLASH_BAR
 591 #define CONFIG_SF_DEFAULT_SPEED  10000000
 592 #define CONFIG_SF_DEFAULT_MODE    0
 593
 594 /*
 595  * General PCIe
 596  * Memory space is mapped 1-1, but I/O space must start from 0.
 597  */
 598 #define CONFIG_PCI              /* Enable PCI/PCIE */
 599 #define CONFIG_PCIE1            /* PCIE controler 1 */
 600 #define CONFIG_PCIE2            /* PCIE controler 2 */
 601 #define CONFIG_PCIE3            /* PCIE controler 3 */
 602 #define CONFIG_FSL_PCI_INIT     /* Use common FSL init code */
 603 #define CONFIG_SYS_PCI_64BIT    /* enable 64-bit PCI resources */
 604 #define CONFIG_PCI_INDIRECT_BRIDGE
 605
 606 #ifdef CONFIG_PCI
 607 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
 608 #ifdef CONFIG_PCIE1
 609 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
 610 #ifdef CONFIG_PHYS_64BIT
 611 #define CONFIG_SYS_PCIE1_MEM_BUS        0xe0000000
 612 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
 613 #else
 614 #define CONFIG_SYS_PCIE1_MEM_BUS        0x80000000
 615 #define CONFIG_SYS_PCIE1_MEM_PHYS       0x80000000
 616 #endif
 617 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x10000000      /* 256M */
 618 #define CONFIG_SYS_PCIE1_IO_VIRT        0xf8000000
 619 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 620 #ifdef CONFIG_PHYS_64BIT
 621 #define CONFIG_SYS_PCIE1_IO_PHYS        0xff8000000ull
 622 #else
 623 #define CONFIG_SYS_PCIE1_IO_PHYS        0xf8000000
 624 #endif
 625 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 626 #endif
 627
 628 /* controller 2, Slot 2, tgtid 2, Base address 201000 */
 629 #ifdef CONFIG_PCIE2
 630 #define CONFIG_SYS_PCIE2_MEM_VIRT       0x90000000
 631 #ifdef CONFIG_PHYS_64BIT
 632 #define CONFIG_SYS_PCIE2_MEM_BUS        0xe0000000
 633 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc10000000ull
 634 #else
 635 #define CONFIG_SYS_PCIE2_MEM_BUS        0x90000000
 636 #define CONFIG_SYS_PCIE2_MEM_PHYS       0x90000000
 637 #endif
 638 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x10000000      /* 256M */
 639 #define CONFIG_SYS_PCIE2_IO_VIRT        0xf8010000
 640 #define CONFIG_SYS_PCIE2_IO_BUS         0x00000000
 641 #ifdef CONFIG_PHYS_64BIT
 642 #define CONFIG_SYS_PCIE2_IO_PHYS        0xff8010000ull
 643 #else
 644 #define CONFIG_SYS_PCIE2_IO_PHYS        0xf8010000
 645 #endif
 646 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00010000      /* 64k */
 647 #endif
 648
 649 /* controller 3, Slot 1, tgtid 1, Base address 202000 */
 650 #ifdef CONFIG_PCIE3
 651 #define CONFIG_SYS_PCIE3_MEM_VIRT       0xa0000000
 652 #ifdef CONFIG_PHYS_64BIT
 653 #define CONFIG_SYS_PCIE3_MEM_BUS        0xe0000000
 654 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc20000000ull
 655 #else
 656 #define CONFIG_SYS_PCIE3_MEM_BUS        0xa0000000
 657 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xa0000000
 658 #endif
 659 #define CONFIG_SYS_PCIE3_MEM_SIZE       0x10000000      /* 256M */
 660 #define CONFIG_SYS_PCIE3_IO_VIRT        0xf8020000
 661 #define CONFIG_SYS_PCIE3_IO_BUS         0x00000000
 662 #ifdef CONFIG_PHYS_64BIT
 663 #define CONFIG_SYS_PCIE3_IO_PHYS        0xff8020000ull
 664 #else
 665 #define CONFIG_SYS_PCIE3_IO_PHYS        0xf8020000
 666 #endif
 667 #define CONFIG_SYS_PCIE3_IO_SIZE        0x00010000      /* 64k */
 668 #endif
 669
 670 #define CONFIG_PCI_PNP                  /* do pci plug-and-play */
 671 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 672 #define CONFIG_DOS_PARTITION
 673 #endif  /* CONFIG_PCI */
 674
 675 /*
 676  *SATA
 677  */
 678 #define CONFIG_FSL_SATA_V2
 679 #ifdef CONFIG_FSL_SATA_V2
 680 #define CONFIG_LIBATA
 681 #define CONFIG_FSL_SATA
 682 #define CONFIG_SYS_SATA_MAX_DEVICE      1
 683 #define CONFIG_SATA1
 684 #define CONFIG_SYS_SATA1                CONFIG_SYS_MPC85xx_SATA1_ADDR
 685 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
 686 #define CONFIG_LBA48
 687 #define CONFIG_CMD_SATA
 688 #define CONFIG_DOS_PARTITION
 689 #define CONFIG_CMD_EXT2
 690 #endif
 691
 692 /*
 693  * USB
 694  */
 695 #define CONFIG_HAS_FSL_DR_USB
 696
 697 #ifdef CONFIG_HAS_FSL_DR_USB
 698 #define CONFIG_USB_EHCI
 699 #define CONFIG_CMD_USB
 700 #define CONFIG_USB_STORAGE
 701 #define CONFIG_USB_EHCI_FSL
 702 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 703 #define CONFIG_CMD_EXT2
 704 #endif
 705
 706 /*
 707  * SDHC
 708  */
 709 #define CONFIG_MMC
 710 #ifdef CONFIG_MMC
 711 #define CONFIG_FSL_ESDHC
 712 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 713 #define CONFIG_CMD_MMC
 714 #define CONFIG_GENERIC_MMC
 715 #define CONFIG_CMD_EXT2
 716 #define CONFIG_CMD_FAT
 717 #define CONFIG_DOS_PARTITION
 718 #endif
 719
 720 /* Qman/Bman */
 721 #ifndef CONFIG_NOBQFMAN
 722 #define CONFIG_SYS_DPAA_QBMAN           /* Support Q/Bman */
 723 #define CONFIG_SYS_BMAN_NUM_PORTALS     10
 724 #define CONFIG_SYS_BMAN_MEM_BASE        0xf4000000
 725 #ifdef CONFIG_PHYS_64BIT
 726 #define CONFIG_SYS_BMAN_MEM_PHYS        0xff4000000ull
 727 #else
 728 #define CONFIG_SYS_BMAN_MEM_PHYS        CONFIG_SYS_BMAN_MEM_BASE
 729 #endif
 730 #define CONFIG_SYS_BMAN_MEM_SIZE        0x02000000
 731 #define CONFIG_SYS_BMAN_SP_CENA_SIZE    0x4000
 732 #define CONFIG_SYS_BMAN_SP_CINH_SIZE    0x1000
 733 #define CONFIG_SYS_BMAN_CENA_BASE       CONFIG_SYS_BMAN_MEM_BASE
 734 #define CONFIG_SYS_BMAN_CENA_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 735 #define CONFIG_SYS_BMAN_CINH_BASE       (CONFIG_SYS_BMAN_MEM_BASE + \
 736                                         CONFIG_SYS_BMAN_CENA_SIZE)
 737 #define CONFIG_SYS_BMAN_CINH_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 738 #define CONFIG_SYS_BMAN_SWP_ISDR_REG    0xE08
 739 #define CONFIG_SYS_QMAN_NUM_PORTALS     10
 740 #define CONFIG_SYS_QMAN_MEM_BASE        0xf6000000
 741 #ifdef CONFIG_PHYS_64BIT
 742 #define CONFIG_SYS_QMAN_MEM_PHYS        0xff6000000ull
 743 #else
 744 #define CONFIG_SYS_QMAN_MEM_PHYS        CONFIG_SYS_QMAN_MEM_BASE
 745 #endif
 746 #define CONFIG_SYS_QMAN_MEM_SIZE        0x02000000
 747 #define CONFIG_SYS_QMAN_SP_CENA_SIZE    0x4000
 748 #define CONFIG_SYS_QMAN_SP_CINH_SIZE    0x1000
 749 #define CONFIG_SYS_QMAN_CENA_BASE       CONFIG_SYS_QMAN_MEM_BASE
 750 #define CONFIG_SYS_QMAN_CENA_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 751 #define CONFIG_SYS_QMAN_CINH_BASE       (CONFIG_SYS_QMAN_MEM_BASE + \
 752                                         CONFIG_SYS_QMAN_CENA_SIZE)
 753 #define CONFIG_SYS_QMAN_CINH_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 754 #define CONFIG_SYS_QMAN_SWP_ISDR_REG    0xE08
 755
 756 #define CONFIG_SYS_DPAA_FMAN
 757
 758 #define CONFIG_QE
 759 #define CONFIG_U_QE
 760 /* Default address of microcode for the Linux FMan driver */
 761 #if defined(CONFIG_SPIFLASH)
 762 /*
 763  * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
 764  * env, so we got 0x110000.
 765  */
 766 #define CONFIG_SYS_QE_FW_IN_SPIFLASH
 767 #define CONFIG_SYS_FMAN_FW_ADDR 0x110000
 768 #define CONFIG_SYS_QE_FW_ADDR   0x130000
 769 #elif defined(CONFIG_SDCARD)
 770 /*
 771  * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
 772  * about 1MB (2048 blocks), Env is stored after the image, and the env size is
 773  * 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 2080(0x820).
 774  */
 775 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC
 776 #define CONFIG_SYS_FMAN_FW_ADDR         (512 * 0x820)
 777 #define CONFIG_SYS_QE_FW_ADDR           (512 * 0x920)
 778 #elif defined(CONFIG_NAND)
 779 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND
 780 #define CONFIG_SYS_FMAN_FW_ADDR         (11 * CONFIG_SYS_NAND_BLOCK_SIZE)
 781 #define CONFIG_SYS_QE_FW_ADDR           (12 * CONFIG_SYS_NAND_BLOCK_SIZE)
 782 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
 783 /*
 784  * Slave has no ucode locally, it can fetch this from remote. When implementing
 785  * in two corenet boards, slave's ucode could be stored in master's memory
 786  * space, the address can be mapped from slave TLB->slave LAW->
 787  * slave SRIO or PCIE outbound window->master inbound window->
 788  * master LAW->the ucode address in master's memory space.
 789  */
 790 #define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE
 791 #define CONFIG_SYS_FMAN_FW_ADDR 0xFFE00000
 792 #else
 793 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
 794 #define CONFIG_SYS_FMAN_FW_ADDR         0xEFF00000
 795 #define CONFIG_SYS_QE_FW_ADDR           0xEFE00000
 796 #endif
 797 #define CONFIG_SYS_QE_FMAN_FW_LENGTH    0x10000
 798 #define CONFIG_SYS_FDT_PAD              (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 799 #endif /* CONFIG_NOBQFMAN */
 800
 801 #ifdef CONFIG_SYS_DPAA_FMAN
 802 #define CONFIG_FMAN_ENET
 803 #define CONFIG_PHYLIB_10G
 804 #define CONFIG_PHY_VITESSE
 805 #define CONFIG_PHY_REALTEK
 806 #define CONFIG_PHY_TERANETICS
 807 #define RGMII_PHY1_ADDR         0x1
 808 #define RGMII_PHY2_ADDR         0x2
 809 #define SGMII_CARD_AQ_PHY_ADDR_S3 0x3
 810 #define SGMII_CARD_AQ_PHY_ADDR_S4 0x4
 811 #define SGMII_CARD_AQ_PHY_ADDR_S5 0x5
 812 #define SGMII_CARD_PORT1_PHY_ADDR 0x1C
 813 #define SGMII_CARD_PORT2_PHY_ADDR 0x1D
 814 #define SGMII_CARD_PORT3_PHY_ADDR 0x1E
 815 #define SGMII_CARD_PORT4_PHY_ADDR 0x1F
 816 #endif
 817
 818 #ifdef CONFIG_FMAN_ENET
 819 #define CONFIG_MII              /* MII PHY management */
 820 #define CONFIG_ETHPRIME         "FM1@DTSEC4"
 821 #define CONFIG_PHY_GIGE         /* Include GbE speed/duplex detection */
 822 #endif
 823
 824 /*
 825  * Dynamic MTD Partition support with mtdparts
 826  */
 827 #ifndef CONFIG_SYS_NO_FLASH
 828 #define CONFIG_MTD_DEVICE
 829 #define CONFIG_MTD_PARTITIONS
 830 #define CONFIG_CMD_MTDPARTS
 831 #define CONFIG_FLASH_CFI_MTD
 832 #define MTDIDS_DEFAULT    "nor0=fe8000000.nor,nand0=fff800000.flash," \
 833                           "spi0=spife110000.0"
 834 #define MTDPARTS_DEFAULT  "mtdparts=fe8000000.nor:1m(uboot),5m(kernel)," \
 835                           "128k(dtb),96m(fs),-(user);"\
 836                           "fff800000.flash:2m(uboot),9m(kernel),"\
 837                           "128k(dtb),96m(fs),-(user);spife110000.0:" \
 838                           "2m(uboot),9m(kernel),128k(dtb),-(user)"
 839 #endif
 840
 841 /*
 842  * Environment
 843  */
 844 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
 845 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 846
 847 /*
 848  * Command line configuration.
 849  */
 850 #define CONFIG_CMD_DATE
 851 #define CONFIG_CMD_DHCP
 852 #define CONFIG_CMD_EEPROM
 853 #define CONFIG_CMD_ELF
 854 #define CONFIG_CMD_ERRATA
 855 #define CONFIG_CMD_GREPENV
 856 #define CONFIG_CMD_IRQ
 857 #define CONFIG_CMD_I2C
 858 #define CONFIG_CMD_MII
 859 #define CONFIG_CMD_PING
 860 #define CONFIG_CMD_REGINFO
 861
 862 #ifdef CONFIG_PCI
 863 #define CONFIG_CMD_PCI
 864 #endif
 865
 866 /*
 867  * Miscellaneous configurable options
 868  */
 869 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 870 #define CONFIG_CMDLINE_EDITING                  /* Command-line editing */
 871 #define CONFIG_AUTO_COMPLETE                    /* add autocompletion support */
 872 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 873 #ifdef CONFIG_CMD_KGDB
 874 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size */
 875 #else
 876 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size */
 877 #endif
 878 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 879 #define CONFIG_SYS_MAXARGS      16              /* max number of command args */
 880 #define CONFIG_SYS_BARGSIZE  CONFIG_SYS_CBSIZE  /* Boot Argument Buffer Size */
 881
 882 /*
 883  * For booting Linux, the board info and command line data
 884  * have to be in the first 64 MB of memory, since this is
 885  * the maximum mapped by the Linux kernel during initialization.
 886  */
 887 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial map for Linux*/
 888 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 889
 890 #ifdef CONFIG_CMD_KGDB
 891 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 892 #endif
 893
 894 /*
 895  * Environment Configuration
 896  */
 897 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 898 #define CONFIG_BOOTFILE         "uImage"
 899 #define CONFIG_UBOOTPATH        "u-boot.bin" /* U-Boot image on TFTP server */
 900 #define CONFIG_LOADADDR         1000000 /* default location for tftp, bootm */
 901 #define CONFIG_BOOTDELAY        10      /* -1 disables auto-boot */
 902 #define CONFIG_BAUDRATE         115200
 903 #define __USB_PHY_TYPE          utmi
 904
 905
 906 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 907         "hwconfig=fsl_ddr:ctlr_intlv=cacheline,bank_intlv=cs0_cs1;\0"  \
 908         "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0" \
 909         "bootargs=root=/dev/ram rw console=ttyS0,115200\0" \
 910         "ramdiskfile=t1024qds/ramdisk.uboot\0"                  \
 911         "fdtfile=t1024qds/t1024qds.dtb\0"                       \
 912         "netdev=eth0\0"                                         \
 913         "video-mode=fslfb:1024x768-32@60,monitor=dvi\0"         \
 914         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"             \
 915         "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"     \
 916         "tftpflash=tftpboot $loadaddr $uboot && "               \
 917         "protect off $ubootaddr +$filesize && "                 \
 918         "erase $ubootaddr +$filesize && "                       \
 919         "cp.b $loadaddr $ubootaddr $filesize && "               \
 920         "protect on $ubootaddr +$filesize && "                  \
 921         "cmp.b $loadaddr $ubootaddr $filesize\0"                \
 922         "consoledev=ttyS0\0"                                    \
 923         "ramdiskaddr=2000000\0"                                 \
 924         "fdtaddr=d00000\0"                                      \
 925         "bdev=sda3\0"
 926
 927 #define CONFIG_LINUX                                    \
 928         "setenv bootargs root=/dev/ram rw "             \
 929         "console=$consoledev,$baudrate $othbootargs;"   \
 930         "setenv ramdiskaddr 0x02000000;"                \
 931         "setenv fdtaddr 0x00c00000;"                    \
 932         "setenv loadaddr 0x1000000;"                    \
 933         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 934
 935 #define CONFIG_NFSBOOTCOMMAND                   \
 936         "setenv bootargs root=/dev/nfs rw "     \
 937         "nfsroot=$serverip:$rootpath "          \
 938         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 939         "console=$consoledev,$baudrate $othbootargs;"   \
 940         "tftp $loadaddr $bootfile;"             \
 941         "tftp $fdtaddr $fdtfile;"               \
 942         "bootm $loadaddr - $fdtaddr"
 943
 944 #define CONFIG_BOOTCOMMAND      CONFIG_LINUX
 945
 946 #ifdef CONFIG_SECURE_BOOT
 947 #include <asm/fsl_secure_boot.h>
 948 #endif
 949
 950 #endif  /* __T1024QDS_H */