include/configs/T102xQDS.h

   1 /*
   2  * Copyright 2014 Freescale Semiconductor, Inc.
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 /*
   8  * T1024/T1023 QDS board configuration file
   9  */
  10
  11 #ifndef __T1024QDS_H
  12 #define __T1024QDS_H
  13
  14 /* High Level Configuration Options */
  15 #define CONFIG_DISPLAY_BOARDINFO
  16 #define CONFIG_BOOKE
  17 #define CONFIG_E500                     /* BOOKE e500 family */
  18 #define CONFIG_E500MC                   /* BOOKE e500mc family */
  19 #define CONFIG_SYS_BOOK3E_HV            /* Category E.HV supported */
  20 #define CONFIG_MP                       /* support multiple processors */
  21 #define CONFIG_ENABLE_36BIT_PHYS
  22
  23 #ifdef CONFIG_PHYS_64BIT
  24 #define CONFIG_ADDR_MAP         1
  25 #define CONFIG_SYS_NUM_ADDR_MAP 64      /* number of TLB1 entries */
  26 #endif
  27
  28 #define CONFIG_SYS_FSL_CPC              /* Corenet Platform Cache */
  29 #define CONFIG_SYS_NUM_CPC              CONFIG_NUM_DDR_CONTROLLERS
  30 #define CONFIG_FSL_IFC                  /* Enable IFC Support */
  31
  32 #define CONFIG_FSL_LAW                  /* Use common FSL init code */
  33 #define CONFIG_ENV_OVERWRITE
  34
  35 #define CONFIG_DEEP_SLEEP
  36 #if defined(CONFIG_DEEP_SLEEP)
  37 #define CONFIG_SILENT_CONSOLE
  38 #define CONFIG_BOARD_EARLY_INIT_F
  39 #endif
  40
  41 #define CONFIG_FSL_CAAM                 /* Enable SEC/CAAM */
  42
  43 #ifdef CONFIG_RAMBOOT_PBL
  44 #define CONFIG_SYS_FSL_PBL_PBI board/freescale/t102xqds/t1024_pbi.cfg
  45 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xqds/t1024_rcw.cfg
  46 #define CONFIG_SPL_SERIAL_SUPPORT
  47 #define CONFIG_SPL_FLUSH_IMAGE
  48 #define CONFIG_SPL_TARGET               "u-boot-with-spl.bin"
  49 #define CONFIG_FSL_LAW                  /* Use common FSL init code */
  50 #define CONFIG_SYS_TEXT_BASE            0x00201000
  51 #define CONFIG_SPL_TEXT_BASE            0xFFFD8000
  52 #define CONFIG_SPL_PAD_TO               0x40000
  53 #define CONFIG_SPL_MAX_SIZE             0x28000
  54 #define RESET_VECTOR_OFFSET             0x27FFC
  55 #define BOOT_PAGE_OFFSET                0x27000
  56 #ifdef CONFIG_SPL_BUILD
  57 #define CONFIG_SPL_SKIP_RELOCATE
  58 #define CONFIG_SPL_COMMON_INIT_DDR
  59 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
  60 #define CONFIG_SYS_NO_FLASH
  61 #endif
  62
  63 #ifdef CONFIG_NAND
  64 #define CONFIG_SPL_NAND_SUPPORT
  65 #define CONFIG_SYS_NAND_U_BOOT_SIZE     (768 << 10)
  66 #define CONFIG_SYS_NAND_U_BOOT_DST      0x00200000
  67 #define CONFIG_SYS_NAND_U_BOOT_START    0x00200000
  68 #define CONFIG_SYS_NAND_U_BOOT_OFFS     (256 << 10)
  69 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
  70 #define CONFIG_SPL_NAND_BOOT
  71 #endif
  72
  73 #ifdef CONFIG_SPIFLASH
  74 #define CONFIG_RESET_VECTOR_ADDRESS             0x200FFC
  75 #define CONFIG_SPL_SPI_SUPPORT
  76 #define CONFIG_SPL_SPI_FLASH_SUPPORT
  77 #define CONFIG_SPL_SPI_FLASH_MINIMAL
  78 #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE        (768 << 10)
  79 #define CONFIG_SYS_SPI_FLASH_U_BOOT_DST         (0x00200000)
  80 #define CONFIG_SYS_SPI_FLASH_U_BOOT_START       (0x00200000)
  81 #define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS        (256 << 10)
  82 #define CONFIG_SYS_LDSCRIPT             "arch/powerpc/cpu/mpc85xx/u-boot.lds"
  83 #ifndef CONFIG_SPL_BUILD
  84 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
  85 #endif
  86 #define CONFIG_SPL_SPI_BOOT
  87 #endif
  88
  89 #ifdef CONFIG_SDCARD
  90 #define CONFIG_RESET_VECTOR_ADDRESS             0x200FFC
  91 #define CONFIG_SPL_MMC_MINIMAL
  92 #define CONFIG_SYS_MMC_U_BOOT_SIZE      (768 << 10)
  93 #define CONFIG_SYS_MMC_U_BOOT_DST       (0x00200000)
  94 #define CONFIG_SYS_MMC_U_BOOT_START     (0x00200000)
  95 #define CONFIG_SYS_MMC_U_BOOT_OFFS      (260 << 10)
  96 #define CONFIG_SYS_LDSCRIPT             "arch/powerpc/cpu/mpc85xx/u-boot.lds"
  97 #ifndef CONFIG_SPL_BUILD
  98 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
  99 #endif
 100 #define CONFIG_SPL_MMC_BOOT
 101 #endif
 102
 103 #endif /* CONFIG_RAMBOOT_PBL */
 104
 105 #ifndef CONFIG_SYS_TEXT_BASE
 106 #define CONFIG_SYS_TEXT_BASE    0xeff40000
 107 #endif
 108
 109 #ifndef CONFIG_RESET_VECTOR_ADDRESS
 110 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
 111 #endif
 112
 113 #ifndef CONFIG_SYS_NO_FLASH
 114 #define CONFIG_FLASH_CFI_DRIVER
 115 #define CONFIG_SYS_FLASH_CFI
 116 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 117 #endif
 118
 119 /* PCIe Boot - Master */
 120 #define CONFIG_SRIO_PCIE_BOOT_MASTER
 121 /*
 122  * for slave u-boot IMAGE instored in master memory space,
 123  * PHYS must be aligned based on the SIZE
 124  */
 125 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff00000ull
 126 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE     0x100000 /* 1M */
 127 #ifdef CONFIG_PHYS_64BIT
 128 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef200000ull
 129 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff00000ull
 130 #else
 131 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xef200000
 132 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0xfff00000
 133 #endif
 134 /*
 135  * for slave UCODE and ENV instored in master memory space,
 136  * PHYS must be aligned based on the SIZE
 137  */
 138 #ifdef CONFIG_PHYS_64BIT
 139 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef100000ull
 140 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS  0x3ffe00000ull
 141 #else
 142 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xef100000
 143 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS  0xffe00000
 144 #endif
 145 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE     0x40000 /* 256K */
 146 /* slave core release by master*/
 147 #define CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET 0xe00e4
 148 #define CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK 0x00000001 /* release core 0 */
 149
 150 /* PCIe Boot - Slave */
 151 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
 152 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR 0xFFE00000
 153 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS \
 154                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR)
 155 /* Set 1M boot space for PCIe boot */
 156 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_SYS_TEXT_BASE & 0xfff00000)
 157 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS       \
 158                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR)
 159 #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc
 160 #define CONFIG_SYS_NO_FLASH
 161 #endif
 162
 163 #if defined(CONFIG_SPIFLASH)
 164 #define CONFIG_SYS_EXTRA_ENV_RELOC
 165 #define CONFIG_ENV_IS_IN_SPI_FLASH
 166 #define CONFIG_ENV_SPI_BUS              0
 167 #define CONFIG_ENV_SPI_CS               0
 168 #define CONFIG_ENV_SPI_MAX_HZ           10000000
 169 #define CONFIG_ENV_SPI_MODE             0
 170 #define CONFIG_ENV_SIZE                 0x2000          /* 8KB */
 171 #define CONFIG_ENV_OFFSET               0x100000        /* 1MB */
 172 #define CONFIG_ENV_SECT_SIZE            0x10000
 173 #elif defined(CONFIG_SDCARD)
 174 #define CONFIG_SYS_EXTRA_ENV_RELOC
 175 #define CONFIG_ENV_IS_IN_MMC
 176 #define CONFIG_SYS_MMC_ENV_DEV          0
 177 #define CONFIG_ENV_SIZE                 0x2000
 178 #define CONFIG_ENV_OFFSET               (512 * 0x800)
 179 #elif defined(CONFIG_NAND)
 180 #define CONFIG_SYS_EXTRA_ENV_RELOC
 181 #define CONFIG_ENV_IS_IN_NAND
 182 #define CONFIG_ENV_SIZE                 0x2000
 183 #define CONFIG_ENV_OFFSET               (10 * CONFIG_SYS_NAND_BLOCK_SIZE)
 184 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
 185 #define CONFIG_ENV_IS_IN_REMOTE
 186 #define CONFIG_ENV_ADDR         0xffe20000
 187 #define CONFIG_ENV_SIZE         0x2000
 188 #elif defined(CONFIG_ENV_IS_NOWHERE)
 189 #define CONFIG_ENV_SIZE         0x2000
 190 #else
 191 #define CONFIG_ENV_IS_IN_FLASH
 192 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 193 #define CONFIG_ENV_SIZE         0x2000
 194 #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
 195 #endif
 196
 197 #ifndef __ASSEMBLY__
 198 unsigned long get_board_sys_clk(void);
 199 unsigned long get_board_ddr_clk(void);
 200 #endif
 201
 202 #define CONFIG_SYS_CLK_FREQ     get_board_sys_clk()
 203 #define CONFIG_DDR_CLK_FREQ     get_board_ddr_clk()
 204
 205 /*
 206  * These can be toggled for performance analysis, otherwise use default.
 207  */
 208 #define CONFIG_SYS_CACHE_STASHING
 209 #define CONFIG_BACKSIDE_L2_CACHE
 210 #define CONFIG_SYS_INIT_L2CSR0          L2CSR0_L2E
 211 #define CONFIG_BTB                      /* toggle branch predition */
 212 #define CONFIG_DDR_ECC
 213 #ifdef CONFIG_DDR_ECC
 214 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
 215 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
 216 #endif
 217
 218 #define CONFIG_SYS_MEMTEST_START        0x00200000 /* memtest works on */
 219 #define CONFIG_SYS_MEMTEST_END          0x00400000
 220 #define CONFIG_SYS_ALT_MEMTEST
 221 #define CONFIG_PANIC_HANG       /* do not reset board on panic */
 222
 223 /*
 224  *  Config the L3 Cache as L3 SRAM
 225  */
 226 #define CONFIG_SYS_INIT_L3_ADDR         0xFFFC0000
 227 #define CONFIG_SYS_L3_SIZE              (256 << 10)
 228 #define CONFIG_SPL_GD_ADDR              (CONFIG_SYS_INIT_L3_ADDR + 32 * 1024)
 229 #ifdef CONFIG_RAMBOOT_PBL
 230 #define CONFIG_ENV_ADDR                 (CONFIG_SPL_GD_ADDR + 4 * 1024)
 231 #endif
 232 #define CONFIG_SPL_RELOC_MALLOC_ADDR    (CONFIG_SPL_GD_ADDR + 12 * 1024)
 233 #define CONFIG_SPL_RELOC_MALLOC_SIZE    (30 << 10)
 234 #define CONFIG_SPL_RELOC_STACK          (CONFIG_SPL_GD_ADDR + 64 * 1024)
 235 #define CONFIG_SPL_RELOC_STACK_SIZE     (22 << 10)
 236
 237 #ifdef CONFIG_PHYS_64BIT
 238 #define CONFIG_SYS_DCSRBAR              0xf0000000
 239 #define CONFIG_SYS_DCSRBAR_PHYS         0xf00000000ull
 240 #endif
 241
 242 /* EEPROM */
 243 #define CONFIG_ID_EEPROM
 244 #define CONFIG_SYS_I2C_EEPROM_NXID
 245 #define CONFIG_SYS_EEPROM_BUS_NUM       0
 246 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x57
 247 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  1
 248 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
 249 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
 250
 251 /*
 252  * DDR Setup
 253  */
 254 #define CONFIG_VERY_BIG_RAM
 255 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 256 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 257 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 258 #define CONFIG_CHIP_SELECTS_PER_CTRL    (4 * CONFIG_DIMM_SLOTS_PER_CTLR)
 259 #define CONFIG_DDR_SPD
 260 #ifndef CONFIG_SYS_FSL_DDR4
 261 #define CONFIG_SYS_FSL_DDR3
 262 #endif
 263
 264 #define CONFIG_SYS_SPD_BUS_NUM  0
 265 #define SPD_EEPROM_ADDRESS      0x51
 266
 267 #define CONFIG_SYS_SDRAM_SIZE   4096    /* for fixed parameter use */
 268
 269 /*
 270  * IFC Definitions
 271  */
 272 #define CONFIG_SYS_FLASH_BASE   0xe0000000
 273 #ifdef CONFIG_PHYS_64BIT
 274 #define CONFIG_SYS_FLASH_BASE_PHYS      (0xf00000000ull | CONFIG_SYS_FLASH_BASE)
 275 #else
 276 #define CONFIG_SYS_FLASH_BASE_PHYS      CONFIG_SYS_FLASH_BASE
 277 #endif
 278
 279 #define CONFIG_SYS_NOR0_CSPR_EXT        (0xf)
 280 #define CONFIG_SYS_NOR0_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \
 281                                 + 0x8000000) | \
 282                                 CSPR_PORT_SIZE_16 | \
 283                                 CSPR_MSEL_NOR | \
 284                                 CSPR_V)
 285 #define CONFIG_SYS_NOR1_CSPR_EXT        (0xf)
 286 #define CONFIG_SYS_NOR1_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
 287                                 CSPR_PORT_SIZE_16 | \
 288                                 CSPR_MSEL_NOR | \
 289                                 CSPR_V)
 290 #define CONFIG_SYS_NOR_AMASK    IFC_AMASK(128*1024*1024)
 291 /* NOR Flash Timing Params */
 292 #define CONFIG_SYS_NOR_CSOR     CSOR_NAND_TRHZ_80
 293 #define CONFIG_SYS_NOR_FTIM0    (FTIM0_NOR_TACSE(0x4) | \
 294                                 FTIM0_NOR_TEADC(0x5) | \
 295                                 FTIM0_NOR_TEAHC(0x5))
 296 #define CONFIG_SYS_NOR_FTIM1    (FTIM1_NOR_TACO(0x35) | \
 297                                 FTIM1_NOR_TRAD_NOR(0x1A) |\
 298                                 FTIM1_NOR_TSEQRAD_NOR(0x13))
 299 #define CONFIG_SYS_NOR_FTIM2    (FTIM2_NOR_TCS(0x4) | \
 300                                 FTIM2_NOR_TCH(0x4) | \
 301                                 FTIM2_NOR_TWPH(0x0E) | \
 302                                 FTIM2_NOR_TWP(0x1c))
 303 #define CONFIG_SYS_NOR_FTIM3    0x0
 304
 305 #define CONFIG_SYS_FLASH_QUIET_TEST
 306 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
 307
 308 #define CONFIG_SYS_MAX_FLASH_BANKS      2       /* number of banks */
 309 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device */
 310 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 311 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 312
 313 #define CONFIG_SYS_FLASH_EMPTY_INFO
 314 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS \
 315                                         + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS}
 316 #define CONFIG_FSL_QIXIS        /* use common QIXIS code */
 317 #define QIXIS_BASE              0xffdf0000
 318 #ifdef CONFIG_PHYS_64BIT
 319 #define QIXIS_BASE_PHYS         (0xf00000000ull | QIXIS_BASE)
 320 #else
 321 #define QIXIS_BASE_PHYS         QIXIS_BASE
 322 #endif
 323 #define QIXIS_LBMAP_SWITCH              0x06
 324 #define QIXIS_LBMAP_MASK                0x0f
 325 #define QIXIS_LBMAP_SHIFT               0
 326 #define QIXIS_LBMAP_DFLTBANK            0x00
 327 #define QIXIS_LBMAP_ALTBANK             0x04
 328 #define QIXIS_RST_CTL_RESET             0x31
 329 #define QIXIS_RCFG_CTL_RECONFIG_IDLE    0x20
 330 #define QIXIS_RCFG_CTL_RECONFIG_START   0x21
 331 #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE   0x08
 332 #define QIXIS_RST_FORCE_MEM             0x01
 333
 334 #define CONFIG_SYS_CSPR3_EXT    (0xf)
 335 #define CONFIG_SYS_CSPR3        (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) \
 336                                 | CSPR_PORT_SIZE_8 \
 337                                 | CSPR_MSEL_GPCM \
 338                                 | CSPR_V)
 339 #define CONFIG_SYS_AMASK3       IFC_AMASK(4*1024)
 340 #define CONFIG_SYS_CSOR3        0x0
 341 /* QIXIS Timing parameters for IFC CS3 */
 342 #define CONFIG_SYS_CS3_FTIM0            (FTIM0_GPCM_TACSE(0x0e) | \
 343                                         FTIM0_GPCM_TEADC(0x0e) | \
 344                                         FTIM0_GPCM_TEAHC(0x0e))
 345 #define CONFIG_SYS_CS3_FTIM1            (FTIM1_GPCM_TACO(0xff) | \
 346                                         FTIM1_GPCM_TRAD(0x3f))
 347 #define CONFIG_SYS_CS3_FTIM2            (FTIM2_GPCM_TCS(0x0e) | \
 348                                         FTIM2_GPCM_TCH(0x8) | \
 349                                         FTIM2_GPCM_TWP(0x1f))
 350 #define CONFIG_SYS_CS3_FTIM3            0x0
 351
 352 #define CONFIG_NAND_FSL_IFC
 353 #define CONFIG_SYS_NAND_BASE            0xff800000
 354 #ifdef CONFIG_PHYS_64BIT
 355 #define CONFIG_SYS_NAND_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_NAND_BASE)
 356 #else
 357 #define CONFIG_SYS_NAND_BASE_PHYS       CONFIG_SYS_NAND_BASE
 358 #endif
 359 #define CONFIG_SYS_NAND_CSPR_EXT        (0xf)
 360 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 361                                 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
 362                                 | CSPR_MSEL_NAND        /* MSEL = NAND */ \
 363                                 | CSPR_V)
 364 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64*1024)
 365
 366 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 367                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 368                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
 369                                 | CSOR_NAND_RAL_3       /* RAL = 3Byes */ \
 370                                 | CSOR_NAND_PGS_2K      /* Page Size = 2K */ \
 371                                 | CSOR_NAND_SPRZ_64/* Spare size = 64 */ \
 372                                 | CSOR_NAND_PB(64))     /*Pages Per Block = 64*/
 373
 374 #define CONFIG_SYS_NAND_ONFI_DETECTION
 375
 376 /* ONFI NAND Flash mode0 Timing Params */
 377 #define CONFIG_SYS_NAND_FTIM0           (FTIM0_NAND_TCCST(0x07) | \
 378                                         FTIM0_NAND_TWP(0x18)   | \
 379                                         FTIM0_NAND_TWCHT(0x07) | \
 380                                         FTIM0_NAND_TWH(0x0a))
 381 #define CONFIG_SYS_NAND_FTIM1           (FTIM1_NAND_TADLE(0x32) | \
 382                                         FTIM1_NAND_TWBE(0x39)  | \
 383                                         FTIM1_NAND_TRR(0x0e)   | \
 384                                         FTIM1_NAND_TRP(0x18))
 385 #define CONFIG_SYS_NAND_FTIM2           (FTIM2_NAND_TRAD(0x0f) | \
 386                                         FTIM2_NAND_TREH(0x0a) | \
 387                                         FTIM2_NAND_TWHRE(0x1e))
 388 #define CONFIG_SYS_NAND_FTIM3           0x0
 389
 390 #define CONFIG_SYS_NAND_DDR_LAW         11
 391 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
 392 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 393 #define CONFIG_CMD_NAND
 394
 395 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128 * 1024)
 396
 397 #if defined(CONFIG_NAND)
 398 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NAND_CSPR_EXT
 399 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
 400 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
 401 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
 402 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
 403 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
 404 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
 405 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
 406 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 407 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR0_CSPR
 408 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
 409 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 410 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 411 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 412 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 413 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 414 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NOR1_CSPR_EXT
 415 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NOR1_CSPR
 416 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NOR_AMASK
 417 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NOR_CSOR
 418 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NOR_FTIM0
 419 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NOR_FTIM1
 420 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NOR_FTIM2
 421 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NOR_FTIM3
 422 #else
 423 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 424 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR0_CSPR
 425 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 426 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 427 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 428 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 429 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 430 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 431 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR1_CSPR_EXT
 432 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR1_CSPR
 433 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
 434 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 435 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 436 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 437 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 438 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 439 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NAND_CSPR_EXT
 440 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NAND_CSPR
 441 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NAND_AMASK
 442 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NAND_CSOR
 443 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NAND_FTIM0
 444 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NAND_FTIM1
 445 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NAND_FTIM2
 446 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NAND_FTIM3
 447 #endif
 448
 449 #ifdef CONFIG_SPL_BUILD
 450 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SPL_TEXT_BASE
 451 #else
 452 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_TEXT_BASE
 453 #endif
 454
 455 #if defined(CONFIG_RAMBOOT_PBL)
 456 #define CONFIG_SYS_RAMBOOT
 457 #endif
 458
 459 #define CONFIG_BOARD_EARLY_INIT_R
 460 #define CONFIG_MISC_INIT_R
 461
 462 #define CONFIG_HWCONFIG
 463
 464 /* define to use L1 as initial stack */
 465 #define CONFIG_L1_INIT_RAM
 466 #define CONFIG_SYS_INIT_RAM_LOCK
 467 #define CONFIG_SYS_INIT_RAM_ADDR        0xfdd00000      /* Initial L1 address */
 468 #ifdef CONFIG_PHYS_64BIT
 469 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH      0xf
 470 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW       0xfe03c000
 471 /* The assembler doesn't like typecast */
 472 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
 473         ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
 474           CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
 475 #else
 476 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS   0xfe03c000 /* Initial L1 address */
 477 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0
 478 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS
 479 #endif
 480 #define CONFIG_SYS_INIT_RAM_SIZE                0x00004000
 481
 482 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - \
 483                                         GENERATED_GBL_DATA_SIZE)
 484 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 485
 486 #define CONFIG_SYS_MONITOR_LEN          (768 * 1024)
 487 #define CONFIG_SYS_MALLOC_LEN           (10 * 1024 * 1024)
 488
 489 /* Serial Port */
 490 #define CONFIG_CONS_INDEX       1
 491 #define CONFIG_SYS_NS16550_SERIAL
 492 #define CONFIG_SYS_NS16550_REG_SIZE     1
 493 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
 494
 495 #define CONFIG_SYS_BAUDRATE_TABLE       \
 496         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 497
 498 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
 499 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
 500 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
 501 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
 502 #define CONFIG_SYS_CONSOLE_IS_IN_ENV    /* determine from environment */
 503
 504 /* Video */
 505 #ifdef CONFIG_PPC_T1024         /* no DIU on T1023 */
 506 #define CONFIG_FSL_DIU_FB
 507 #ifdef CONFIG_FSL_DIU_FB
 508 #define CONFIG_FSL_DIU_CH7301
 509 #define CONFIG_SYS_DIU_ADDR     (CONFIG_SYS_CCSRBAR + 0x180000)
 510 #define CONFIG_VIDEO
 511 #define CONFIG_CMD_BMP
 512 #define CONFIG_CFB_CONSOLE
 513 #define CONFIG_VIDEO_SW_CURSOR
 514 #define CONFIG_VGA_AS_SINGLE_DEVICE
 515 #define CONFIG_VIDEO_LOGO
 516 #define CONFIG_VIDEO_BMP_LOGO
 517 #define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS
 518 /*
 519  * With CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS, flash I/O is really slow, so
 520  * disable empty flash sector detection, which is I/O-intensive.
 521  */
 522 #undef CONFIG_SYS_FLASH_EMPTY_INFO
 523 #endif
 524 #endif
 525
 526 /* I2C */
 527 #define CONFIG_SYS_I2C
 528 #define CONFIG_SYS_I2C_FSL              /* Use FSL common I2C driver */
 529 #define CONFIG_SYS_FSL_I2C_SPEED        50000   /* I2C speed in Hz */
 530 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 531 #define CONFIG_SYS_FSL_I2C2_SPEED       50000   /* I2C speed in Hz */
 532 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
 533 #define CONFIG_SYS_FSL_I2C_OFFSET       0x118000
 534 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x118100
 535
 536 #define I2C_MUX_PCA_ADDR                0x77
 537 #define I2C_MUX_PCA_ADDR_PRI            0x77 /* Primary Mux*/
 538 #define I2C_MUX_PCA_ADDR_SEC            0x76 /* Secondary multiplexer */
 539 #define I2C_RETIMER_ADDR                0x18
 540
 541 /* I2C bus multiplexer */
 542 #define I2C_MUX_CH_DEFAULT      0x8
 543 #define I2C_MUX_CH_DIU          0xC
 544 #define I2C_MUX_CH5             0xD
 545 #define I2C_MUX_CH7             0xF
 546
 547 /* LDI/DVI Encoder for display */
 548 #define CONFIG_SYS_I2C_LDI_ADDR  0x38
 549 #define CONFIG_SYS_I2C_DVI_ADDR  0x75
 550
 551 /*
 552  * RTC configuration
 553  */
 554 #define RTC
 555 #define CONFIG_RTC_DS3231       1
 556 #define CONFIG_SYS_I2C_RTC_ADDR 0x68
 557
 558 /*
 559  * eSPI - Enhanced SPI
 560  */
 561 #ifndef CONFIG_SPL_BUILD
 562 #endif
 563 #define CONFIG_SPI_FLASH_BAR
 564 #define CONFIG_SF_DEFAULT_SPEED  10000000
 565 #define CONFIG_SF_DEFAULT_MODE    0
 566
 567 /*
 568  * General PCIe
 569  * Memory space is mapped 1-1, but I/O space must start from 0.
 570  */
 571 #define CONFIG_PCI              /* Enable PCI/PCIE */
 572 #define CONFIG_PCIE1            /* PCIE controller 1 */
 573 #define CONFIG_PCIE2            /* PCIE controller 2 */
 574 #define CONFIG_PCIE3            /* PCIE controller 3 */
 575 #define CONFIG_FSL_PCI_INIT     /* Use common FSL init code */
 576 #define CONFIG_SYS_PCI_64BIT    /* enable 64-bit PCI resources */
 577 #define CONFIG_PCI_INDIRECT_BRIDGE
 578
 579 #ifdef CONFIG_PCI
 580 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
 581 #ifdef CONFIG_PCIE1
 582 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
 583 #ifdef CONFIG_PHYS_64BIT
 584 #define CONFIG_SYS_PCIE1_MEM_BUS        0xe0000000
 585 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
 586 #else
 587 #define CONFIG_SYS_PCIE1_MEM_BUS        0x80000000
 588 #define CONFIG_SYS_PCIE1_MEM_PHYS       0x80000000
 589 #endif
 590 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x10000000      /* 256M */
 591 #define CONFIG_SYS_PCIE1_IO_VIRT        0xf8000000
 592 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 593 #ifdef CONFIG_PHYS_64BIT
 594 #define CONFIG_SYS_PCIE1_IO_PHYS        0xff8000000ull
 595 #else
 596 #define CONFIG_SYS_PCIE1_IO_PHYS        0xf8000000
 597 #endif
 598 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 599 #endif
 600
 601 /* controller 2, Slot 2, tgtid 2, Base address 201000 */
 602 #ifdef CONFIG_PCIE2
 603 #define CONFIG_SYS_PCIE2_MEM_VIRT       0x90000000
 604 #ifdef CONFIG_PHYS_64BIT
 605 #define CONFIG_SYS_PCIE2_MEM_BUS        0xe0000000
 606 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc10000000ull
 607 #else
 608 #define CONFIG_SYS_PCIE2_MEM_BUS        0x90000000
 609 #define CONFIG_SYS_PCIE2_MEM_PHYS       0x90000000
 610 #endif
 611 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x10000000      /* 256M */
 612 #define CONFIG_SYS_PCIE2_IO_VIRT        0xf8010000
 613 #define CONFIG_SYS_PCIE2_IO_BUS         0x00000000
 614 #ifdef CONFIG_PHYS_64BIT
 615 #define CONFIG_SYS_PCIE2_IO_PHYS        0xff8010000ull
 616 #else
 617 #define CONFIG_SYS_PCIE2_IO_PHYS        0xf8010000
 618 #endif
 619 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00010000      /* 64k */
 620 #endif
 621
 622 /* controller 3, Slot 1, tgtid 1, Base address 202000 */
 623 #ifdef CONFIG_PCIE3
 624 #define CONFIG_SYS_PCIE3_MEM_VIRT       0xa0000000
 625 #ifdef CONFIG_PHYS_64BIT
 626 #define CONFIG_SYS_PCIE3_MEM_BUS        0xe0000000
 627 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc20000000ull
 628 #else
 629 #define CONFIG_SYS_PCIE3_MEM_BUS        0xa0000000
 630 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xa0000000
 631 #endif
 632 #define CONFIG_SYS_PCIE3_MEM_SIZE       0x10000000      /* 256M */
 633 #define CONFIG_SYS_PCIE3_IO_VIRT        0xf8020000
 634 #define CONFIG_SYS_PCIE3_IO_BUS         0x00000000
 635 #ifdef CONFIG_PHYS_64BIT
 636 #define CONFIG_SYS_PCIE3_IO_PHYS        0xff8020000ull
 637 #else
 638 #define CONFIG_SYS_PCIE3_IO_PHYS        0xf8020000
 639 #endif
 640 #define CONFIG_SYS_PCIE3_IO_SIZE        0x00010000      /* 64k */
 641 #endif
 642
 643 #define CONFIG_PCI_PNP                  /* do pci plug-and-play */
 644 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 645 #define CONFIG_DOS_PARTITION
 646 #endif  /* CONFIG_PCI */
 647
 648 /*
 649  *SATA
 650  */
 651 #define CONFIG_FSL_SATA_V2
 652 #ifdef CONFIG_FSL_SATA_V2
 653 #define CONFIG_LIBATA
 654 #define CONFIG_FSL_SATA
 655 #define CONFIG_SYS_SATA_MAX_DEVICE      1
 656 #define CONFIG_SATA1
 657 #define CONFIG_SYS_SATA1                CONFIG_SYS_MPC85xx_SATA1_ADDR
 658 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
 659 #define CONFIG_LBA48
 660 #define CONFIG_CMD_SATA
 661 #define CONFIG_DOS_PARTITION
 662 #endif
 663
 664 /*
 665  * USB
 666  */
 667 #define CONFIG_HAS_FSL_DR_USB
 668
 669 #ifdef CONFIG_HAS_FSL_DR_USB
 670 #define CONFIG_USB_EHCI
 671 #define CONFIG_USB_EHCI_FSL
 672 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 673 #endif
 674
 675 /*
 676  * SDHC
 677  */
 678 #define CONFIG_MMC
 679 #ifdef CONFIG_MMC
 680 #define CONFIG_FSL_ESDHC
 681 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 682 #define CONFIG_GENERIC_MMC
 683 #define CONFIG_DOS_PARTITION
 684 #endif
 685
 686 /* Qman/Bman */
 687 #ifndef CONFIG_NOBQFMAN
 688 #define CONFIG_SYS_DPAA_QBMAN           /* Support Q/Bman */
 689 #define CONFIG_SYS_BMAN_NUM_PORTALS     10
 690 #define CONFIG_SYS_BMAN_MEM_BASE        0xf4000000
 691 #ifdef CONFIG_PHYS_64BIT
 692 #define CONFIG_SYS_BMAN_MEM_PHYS        0xff4000000ull
 693 #else
 694 #define CONFIG_SYS_BMAN_MEM_PHYS        CONFIG_SYS_BMAN_MEM_BASE
 695 #endif
 696 #define CONFIG_SYS_BMAN_MEM_SIZE        0x02000000
 697 #define CONFIG_SYS_BMAN_SP_CENA_SIZE    0x4000
 698 #define CONFIG_SYS_BMAN_SP_CINH_SIZE    0x1000
 699 #define CONFIG_SYS_BMAN_CENA_BASE       CONFIG_SYS_BMAN_MEM_BASE
 700 #define CONFIG_SYS_BMAN_CENA_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 701 #define CONFIG_SYS_BMAN_CINH_BASE       (CONFIG_SYS_BMAN_MEM_BASE + \
 702                                         CONFIG_SYS_BMAN_CENA_SIZE)
 703 #define CONFIG_SYS_BMAN_CINH_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 704 #define CONFIG_SYS_BMAN_SWP_ISDR_REG    0xE08
 705 #define CONFIG_SYS_QMAN_NUM_PORTALS     10
 706 #define CONFIG_SYS_QMAN_MEM_BASE        0xf6000000
 707 #ifdef CONFIG_PHYS_64BIT
 708 #define CONFIG_SYS_QMAN_MEM_PHYS        0xff6000000ull
 709 #else
 710 #define CONFIG_SYS_QMAN_MEM_PHYS        CONFIG_SYS_QMAN_MEM_BASE
 711 #endif
 712 #define CONFIG_SYS_QMAN_MEM_SIZE        0x02000000
 713 #define CONFIG_SYS_QMAN_SP_CENA_SIZE    0x4000
 714 #define CONFIG_SYS_QMAN_SP_CINH_SIZE    0x1000
 715 #define CONFIG_SYS_QMAN_CENA_BASE       CONFIG_SYS_QMAN_MEM_BASE
 716 #define CONFIG_SYS_QMAN_CENA_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 717 #define CONFIG_SYS_QMAN_CINH_BASE       (CONFIG_SYS_QMAN_MEM_BASE + \
 718                                         CONFIG_SYS_QMAN_CENA_SIZE)
 719 #define CONFIG_SYS_QMAN_CINH_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 720 #define CONFIG_SYS_QMAN_SWP_ISDR_REG    0xE08
 721
 722 #define CONFIG_SYS_DPAA_FMAN
 723
 724 #define CONFIG_QE
 725 #define CONFIG_U_QE
 726 /* Default address of microcode for the Linux FMan driver */
 727 #if defined(CONFIG_SPIFLASH)
 728 /*
 729  * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
 730  * env, so we got 0x110000.
 731  */
 732 #define CONFIG_SYS_QE_FW_IN_SPIFLASH
 733 #define CONFIG_SYS_FMAN_FW_ADDR 0x110000
 734 #define CONFIG_SYS_QE_FW_ADDR   0x130000
 735 #elif defined(CONFIG_SDCARD)
 736 /*
 737  * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
 738  * about 1MB (2048 blocks), Env is stored after the image, and the env size is
 739  * 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 2080(0x820).
 740  */
 741 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC
 742 #define CONFIG_SYS_FMAN_FW_ADDR         (512 * 0x820)
 743 #define CONFIG_SYS_QE_FW_ADDR           (512 * 0x920)
 744 #elif defined(CONFIG_NAND)
 745 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND
 746 #define CONFIG_SYS_FMAN_FW_ADDR         (11 * CONFIG_SYS_NAND_BLOCK_SIZE)
 747 #define CONFIG_SYS_QE_FW_ADDR           (12 * CONFIG_SYS_NAND_BLOCK_SIZE)
 748 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
 749 /*
 750  * Slave has no ucode locally, it can fetch this from remote. When implementing
 751  * in two corenet boards, slave's ucode could be stored in master's memory
 752  * space, the address can be mapped from slave TLB->slave LAW->
 753  * slave SRIO or PCIE outbound window->master inbound window->
 754  * master LAW->the ucode address in master's memory space.
 755  */
 756 #define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE
 757 #define CONFIG_SYS_FMAN_FW_ADDR 0xFFE00000
 758 #else
 759 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
 760 #define CONFIG_SYS_FMAN_FW_ADDR         0xEFF00000
 761 #define CONFIG_SYS_QE_FW_ADDR           0xEFE00000
 762 #endif
 763 #define CONFIG_SYS_QE_FMAN_FW_LENGTH    0x10000
 764 #define CONFIG_SYS_FDT_PAD              (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 765 #endif /* CONFIG_NOBQFMAN */
 766
 767 #ifdef CONFIG_SYS_DPAA_FMAN
 768 #define CONFIG_FMAN_ENET
 769 #define CONFIG_PHYLIB_10G
 770 #define CONFIG_PHY_VITESSE
 771 #define CONFIG_PHY_REALTEK
 772 #define CONFIG_PHY_TERANETICS
 773 #define RGMII_PHY1_ADDR         0x1
 774 #define RGMII_PHY2_ADDR         0x2
 775 #define SGMII_CARD_AQ_PHY_ADDR_S3 0x3
 776 #define SGMII_CARD_AQ_PHY_ADDR_S4 0x4
 777 #define SGMII_CARD_AQ_PHY_ADDR_S5 0x5
 778 #define SGMII_CARD_PORT1_PHY_ADDR 0x1C
 779 #define SGMII_CARD_PORT2_PHY_ADDR 0x1D
 780 #define SGMII_CARD_PORT3_PHY_ADDR 0x1E
 781 #define SGMII_CARD_PORT4_PHY_ADDR 0x1F
 782 #endif
 783
 784 #ifdef CONFIG_FMAN_ENET
 785 #define CONFIG_MII              /* MII PHY management */
 786 #define CONFIG_ETHPRIME         "FM1@DTSEC4"
 787 #define CONFIG_PHY_GIGE         /* Include GbE speed/duplex detection */
 788 #endif
 789
 790 /*
 791  * Dynamic MTD Partition support with mtdparts
 792  */
 793 #ifndef CONFIG_SYS_NO_FLASH
 794 #define CONFIG_MTD_DEVICE
 795 #define CONFIG_MTD_PARTITIONS
 796 #define CONFIG_CMD_MTDPARTS
 797 #define CONFIG_FLASH_CFI_MTD
 798 #define MTDIDS_DEFAULT    "nor0=fe8000000.nor,nand0=fff800000.flash," \
 799                           "spi0=spife110000.0"
 800 #define MTDPARTS_DEFAULT  "mtdparts=fe8000000.nor:1m(uboot),5m(kernel)," \
 801                           "128k(dtb),96m(fs),-(user);"\
 802                           "fff800000.flash:2m(uboot),9m(kernel),"\
 803                           "128k(dtb),96m(fs),-(user);spife110000.0:" \
 804                           "2m(uboot),9m(kernel),128k(dtb),-(user)"
 805 #endif
 806
 807 /*
 808  * Environment
 809  */
 810 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
 811 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 812
 813 /*
 814  * Command line configuration.
 815  */
 816 #define CONFIG_CMD_DATE
 817 #define CONFIG_CMD_EEPROM
 818 #define CONFIG_CMD_ERRATA
 819 #define CONFIG_CMD_IRQ
 820 #define CONFIG_CMD_REGINFO
 821
 822 #ifdef CONFIG_PCI
 823 #define CONFIG_CMD_PCI
 824 #endif
 825
 826 /*
 827  * Miscellaneous configurable options
 828  */
 829 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 830 #define CONFIG_CMDLINE_EDITING                  /* Command-line editing */
 831 #define CONFIG_AUTO_COMPLETE                    /* add autocompletion support */
 832 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 833 #ifdef CONFIG_CMD_KGDB
 834 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size */
 835 #else
 836 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size */
 837 #endif
 838 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 839 #define CONFIG_SYS_MAXARGS      16              /* max number of command args */
 840 #define CONFIG_SYS_BARGSIZE  CONFIG_SYS_CBSIZE  /* Boot Argument Buffer Size */
 841
 842 /*
 843  * For booting Linux, the board info and command line data
 844  * have to be in the first 64 MB of memory, since this is
 845  * the maximum mapped by the Linux kernel during initialization.
 846  */
 847 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial map for Linux*/
 848 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 849
 850 #ifdef CONFIG_CMD_KGDB
 851 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 852 #endif
 853
 854 /*
 855  * Environment Configuration
 856  */
 857 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 858 #define CONFIG_BOOTFILE         "uImage"
 859 #define CONFIG_UBOOTPATH        "u-boot.bin" /* U-Boot image on TFTP server */
 860 #define CONFIG_LOADADDR         1000000 /* default location for tftp, bootm */
 861 #define CONFIG_BAUDRATE         115200
 862 #define __USB_PHY_TYPE          utmi
 863
 864 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 865         "hwconfig=fsl_ddr:ctlr_intlv=cacheline,bank_intlv=cs0_cs1;\0"  \
 866         "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0" \
 867         "bootargs=root=/dev/ram rw console=ttyS0,115200\0" \
 868         "ramdiskfile=t1024qds/ramdisk.uboot\0"                  \
 869         "fdtfile=t1024qds/t1024qds.dtb\0"                       \
 870         "netdev=eth0\0"                                         \
 871         "video-mode=fslfb:1024x768-32@60,monitor=dvi\0"         \
 872         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"             \
 873         "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"     \
 874         "tftpflash=tftpboot $loadaddr $uboot && "               \
 875         "protect off $ubootaddr +$filesize && "                 \
 876         "erase $ubootaddr +$filesize && "                       \
 877         "cp.b $loadaddr $ubootaddr $filesize && "               \
 878         "protect on $ubootaddr +$filesize && "                  \
 879         "cmp.b $loadaddr $ubootaddr $filesize\0"                \
 880         "consoledev=ttyS0\0"                                    \
 881         "ramdiskaddr=2000000\0"                                 \
 882         "fdtaddr=d00000\0"                                      \
 883         "bdev=sda3\0"
 884
 885 #define CONFIG_LINUX                                    \
 886         "setenv bootargs root=/dev/ram rw "             \
 887         "console=$consoledev,$baudrate $othbootargs;"   \
 888         "setenv ramdiskaddr 0x02000000;"                \
 889         "setenv fdtaddr 0x00c00000;"                    \
 890         "setenv loadaddr 0x1000000;"                    \
 891         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 892
 893 #define CONFIG_NFSBOOTCOMMAND                   \
 894         "setenv bootargs root=/dev/nfs rw "     \
 895         "nfsroot=$serverip:$rootpath "          \
 896         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 897         "console=$consoledev,$baudrate $othbootargs;"   \
 898         "tftp $loadaddr $bootfile;"             \
 899         "tftp $fdtaddr $fdtfile;"               \
 900         "bootm $loadaddr - $fdtaddr"
 901
 902 #define CONFIG_BOOTCOMMAND      CONFIG_LINUX
 903
 904 /* Hash command with SHA acceleration supported in hardware */
 905 #ifdef CONFIG_FSL_CAAM
 906 #define CONFIG_CMD_HASH
 907 #define CONFIG_SHA_HW_ACCEL
 908 #endif
 909
 910 #include <asm/fsl_secure_boot.h>
 911
 912 #endif  /* __T1024QDS_H */