nand: Remove CONFIG_MTD_NAND_VERIFY_WRITE
[platform/kernel/u-boot.git] / include / configs / T102xQDS.h
1 /*
2  * Copyright 2014 Freescale Semiconductor, Inc.
3  *
4  * SPDX-License-Identifier:     GPL-2.0+
5  */
6
7 /*
8  * T1024/T1023 QDS board configuration file
9  */
10
11 #ifndef __T1024QDS_H
12 #define __T1024QDS_H
13
14 /* High Level Configuration Options */
15 #define CONFIG_SYS_GENERIC_BOARD
16 #define CONFIG_DISPLAY_BOARDINFO
17 #define CONFIG_BOOKE
18 #define CONFIG_E500                     /* BOOKE e500 family */
19 #define CONFIG_E500MC                   /* BOOKE e500mc family */
20 #define CONFIG_SYS_BOOK3E_HV            /* Category E.HV supported */
21 #define CONFIG_MP                       /* support multiple processors */
22 #define CONFIG_PHYS_64BIT
23 #define CONFIG_ENABLE_36BIT_PHYS
24
25 #ifdef CONFIG_PHYS_64BIT
26 #define CONFIG_ADDR_MAP         1
27 #define CONFIG_SYS_NUM_ADDR_MAP 64      /* number of TLB1 entries */
28 #endif
29
30 #define CONFIG_SYS_FSL_CPC              /* Corenet Platform Cache */
31 #define CONFIG_SYS_NUM_CPC              CONFIG_NUM_DDR_CONTROLLERS
32 #define CONFIG_FSL_IFC                  /* Enable IFC Support */
33
34 #define CONFIG_FSL_LAW                  /* Use common FSL init code */
35 #define CONFIG_ENV_OVERWRITE
36
37 #define CONFIG_DEEP_SLEEP
38 #if defined(CONFIG_DEEP_SLEEP)
39 #define CONFIG_SILENT_CONSOLE
40 #define CONFIG_BOARD_EARLY_INIT_F
41 #endif
42
43 #ifdef CONFIG_RAMBOOT_PBL
44 #define CONFIG_SYS_FSL_PBL_PBI board/freescale/t102xqds/t1024_pbi.cfg
45 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xqds/t1024_rcw.cfg
46 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
47 #define CONFIG_SPL_ENV_SUPPORT
48 #define CONFIG_SPL_SERIAL_SUPPORT
49 #define CONFIG_SPL_FLUSH_IMAGE
50 #define CONFIG_SPL_TARGET               "u-boot-with-spl.bin"
51 #define CONFIG_SPL_LIBGENERIC_SUPPORT
52 #define CONFIG_SPL_LIBCOMMON_SUPPORT
53 #define CONFIG_SPL_I2C_SUPPORT
54 #define CONFIG_SPL_DRIVERS_MISC_SUPPORT
55 #define CONFIG_FSL_LAW                  /* Use common FSL init code */
56 #define CONFIG_SYS_TEXT_BASE            0x00201000
57 #define CONFIG_SPL_TEXT_BASE            0xFFFD8000
58 #define CONFIG_SPL_PAD_TO               0x40000
59 #define CONFIG_SPL_MAX_SIZE             0x28000
60 #define RESET_VECTOR_OFFSET             0x27FFC
61 #define BOOT_PAGE_OFFSET                0x27000
62 #ifdef CONFIG_SPL_BUILD
63 #define CONFIG_SPL_SKIP_RELOCATE
64 #define CONFIG_SPL_COMMON_INIT_DDR
65 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
66 #define CONFIG_SYS_NO_FLASH
67 #endif
68
69 #ifdef CONFIG_NAND
70 #define CONFIG_SPL_NAND_SUPPORT
71 #define CONFIG_SYS_NAND_U_BOOT_SIZE     (768 << 10)
72 #define CONFIG_SYS_NAND_U_BOOT_DST      0x00200000
73 #define CONFIG_SYS_NAND_U_BOOT_START    0x00200000
74 #define CONFIG_SYS_NAND_U_BOOT_OFFS     (256 << 10)
75 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
76 #define CONFIG_SPL_NAND_BOOT
77 #endif
78
79 #ifdef CONFIG_SPIFLASH
80 #define CONFIG_RESET_VECTOR_ADDRESS             0x200FFC
81 #define CONFIG_SPL_SPI_SUPPORT
82 #define CONFIG_SPL_SPI_FLASH_SUPPORT
83 #define CONFIG_SPL_SPI_FLASH_MINIMAL
84 #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE        (768 << 10)
85 #define CONFIG_SYS_SPI_FLASH_U_BOOT_DST         (0x00200000)
86 #define CONFIG_SYS_SPI_FLASH_U_BOOT_START       (0x00200000)
87 #define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS        (256 << 10)
88 #define CONFIG_SYS_LDSCRIPT             "arch/powerpc/cpu/mpc85xx/u-boot.lds"
89 #ifndef CONFIG_SPL_BUILD
90 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
91 #endif
92 #define CONFIG_SPL_SPI_BOOT
93 #endif
94
95 #ifdef CONFIG_SDCARD
96 #define CONFIG_RESET_VECTOR_ADDRESS             0x200FFC
97 #define CONFIG_SPL_MMC_SUPPORT
98 #define CONFIG_SPL_MMC_MINIMAL
99 #define CONFIG_SYS_MMC_U_BOOT_SIZE      (768 << 10)
100 #define CONFIG_SYS_MMC_U_BOOT_DST       (0x00200000)
101 #define CONFIG_SYS_MMC_U_BOOT_START     (0x00200000)
102 #define CONFIG_SYS_MMC_U_BOOT_OFFS      (260 << 10)
103 #define CONFIG_SYS_LDSCRIPT             "arch/powerpc/cpu/mpc85xx/u-boot.lds"
104 #ifndef CONFIG_SPL_BUILD
105 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
106 #endif
107 #define CONFIG_SPL_MMC_BOOT
108 #endif
109
110 #endif /* CONFIG_RAMBOOT_PBL */
111
112 #ifndef CONFIG_SYS_TEXT_BASE
113 #define CONFIG_SYS_TEXT_BASE    0xeff40000
114 #endif
115
116 #ifndef CONFIG_RESET_VECTOR_ADDRESS
117 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
118 #endif
119
120 #ifndef CONFIG_SYS_NO_FLASH
121 #define CONFIG_FLASH_CFI_DRIVER
122 #define CONFIG_SYS_FLASH_CFI
123 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
124 #endif
125
126 /* PCIe Boot - Master */
127 #define CONFIG_SRIO_PCIE_BOOT_MASTER
128 /*
129  * for slave u-boot IMAGE instored in master memory space,
130  * PHYS must be aligned based on the SIZE
131  */
132 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff00000ull
133 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE     0x100000 /* 1M */
134 #ifdef CONFIG_PHYS_64BIT
135 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef200000ull
136 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff00000ull
137 #else
138 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xef200000
139 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0xfff00000
140 #endif
141 /*
142  * for slave UCODE and ENV instored in master memory space,
143  * PHYS must be aligned based on the SIZE
144  */
145 #ifdef CONFIG_PHYS_64BIT
146 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef100000ull
147 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS  0x3ffe00000ull
148 #else
149 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xef100000
150 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS  0xffe00000
151 #endif
152 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE     0x40000 /* 256K */
153 /* slave core release by master*/
154 #define CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET 0xe00e4
155 #define CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK 0x00000001 /* release core 0 */
156
157 /* PCIe Boot - Slave */
158 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
159 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR 0xFFE00000
160 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS \
161                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR)
162 /* Set 1M boot space for PCIe boot */
163 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_SYS_TEXT_BASE & 0xfff00000)
164 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS       \
165                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR)
166 #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc
167 #define CONFIG_SYS_NO_FLASH
168 #endif
169
170 #if defined(CONFIG_SPIFLASH)
171 #define CONFIG_SYS_EXTRA_ENV_RELOC
172 #define CONFIG_ENV_IS_IN_SPI_FLASH
173 #define CONFIG_ENV_SPI_BUS              0
174 #define CONFIG_ENV_SPI_CS               0
175 #define CONFIG_ENV_SPI_MAX_HZ           10000000
176 #define CONFIG_ENV_SPI_MODE             0
177 #define CONFIG_ENV_SIZE                 0x2000          /* 8KB */
178 #define CONFIG_ENV_OFFSET               0x100000        /* 1MB */
179 #define CONFIG_ENV_SECT_SIZE            0x10000
180 #elif defined(CONFIG_SDCARD)
181 #define CONFIG_SYS_EXTRA_ENV_RELOC
182 #define CONFIG_ENV_IS_IN_MMC
183 #define CONFIG_SYS_MMC_ENV_DEV          0
184 #define CONFIG_ENV_SIZE                 0x2000
185 #define CONFIG_ENV_OFFSET               (512 * 0x800)
186 #elif defined(CONFIG_NAND)
187 #define CONFIG_SYS_EXTRA_ENV_RELOC
188 #define CONFIG_ENV_IS_IN_NAND
189 #define CONFIG_ENV_SIZE                 0x2000
190 #define CONFIG_ENV_OFFSET               (10 * CONFIG_SYS_NAND_BLOCK_SIZE)
191 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
192 #define CONFIG_ENV_IS_IN_REMOTE
193 #define CONFIG_ENV_ADDR         0xffe20000
194 #define CONFIG_ENV_SIZE         0x2000
195 #elif defined(CONFIG_ENV_IS_NOWHERE)
196 #define CONFIG_ENV_SIZE         0x2000
197 #else
198 #define CONFIG_ENV_IS_IN_FLASH
199 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
200 #define CONFIG_ENV_SIZE         0x2000
201 #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
202 #endif
203
204
205 #ifndef __ASSEMBLY__
206 unsigned long get_board_sys_clk(void);
207 unsigned long get_board_ddr_clk(void);
208 #endif
209
210 #define CONFIG_SYS_CLK_FREQ     get_board_sys_clk()
211 #define CONFIG_DDR_CLK_FREQ     get_board_ddr_clk()
212
213 /*
214  * These can be toggled for performance analysis, otherwise use default.
215  */
216 #define CONFIG_SYS_CACHE_STASHING
217 #define CONFIG_BACKSIDE_L2_CACHE
218 #define CONFIG_SYS_INIT_L2CSR0          L2CSR0_L2E
219 #define CONFIG_BTB                      /* toggle branch predition */
220 #define CONFIG_DDR_ECC
221 #ifdef CONFIG_DDR_ECC
222 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
223 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
224 #endif
225
226 #define CONFIG_SYS_MEMTEST_START        0x00200000 /* memtest works on */
227 #define CONFIG_SYS_MEMTEST_END          0x00400000
228 #define CONFIG_SYS_ALT_MEMTEST
229 #define CONFIG_PANIC_HANG       /* do not reset board on panic */
230
231 /*
232  *  Config the L3 Cache as L3 SRAM
233  */
234 #define CONFIG_SYS_INIT_L3_ADDR         0xFFFC0000
235 #define CONFIG_SYS_L3_SIZE              (256 << 10)
236 #define CONFIG_SPL_GD_ADDR              (CONFIG_SYS_INIT_L3_ADDR + 32 * 1024)
237 #ifdef CONFIG_RAMBOOT_PBL
238 #define CONFIG_ENV_ADDR                 (CONFIG_SPL_GD_ADDR + 4 * 1024)
239 #endif
240 #define CONFIG_SPL_RELOC_MALLOC_ADDR    (CONFIG_SPL_GD_ADDR + 12 * 1024)
241 #define CONFIG_SPL_RELOC_MALLOC_SIZE    (30 << 10)
242 #define CONFIG_SPL_RELOC_STACK          (CONFIG_SPL_GD_ADDR + 64 * 1024)
243 #define CONFIG_SPL_RELOC_STACK_SIZE     (22 << 10)
244
245 #ifdef CONFIG_PHYS_64BIT
246 #define CONFIG_SYS_DCSRBAR              0xf0000000
247 #define CONFIG_SYS_DCSRBAR_PHYS         0xf00000000ull
248 #endif
249
250 /* EEPROM */
251 #define CONFIG_ID_EEPROM
252 #define CONFIG_SYS_I2C_EEPROM_NXID
253 #define CONFIG_SYS_EEPROM_BUS_NUM       0
254 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x57
255 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  1
256 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
257 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
258
259 /*
260  * DDR Setup
261  */
262 #define CONFIG_VERY_BIG_RAM
263 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
264 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
265 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
266 #define CONFIG_CHIP_SELECTS_PER_CTRL    (4 * CONFIG_DIMM_SLOTS_PER_CTLR)
267 #define CONFIG_DDR_SPD
268 #ifndef CONFIG_SYS_FSL_DDR4
269 #define CONFIG_SYS_FSL_DDR3
270 #endif
271
272 #define CONFIG_SYS_SPD_BUS_NUM  0
273 #define SPD_EEPROM_ADDRESS      0x51
274
275 #define CONFIG_SYS_SDRAM_SIZE   4096    /* for fixed parameter use */
276
277 /*
278  * IFC Definitions
279  */
280 #define CONFIG_SYS_FLASH_BASE   0xe0000000
281 #ifdef CONFIG_PHYS_64BIT
282 #define CONFIG_SYS_FLASH_BASE_PHYS      (0xf00000000ull | CONFIG_SYS_FLASH_BASE)
283 #else
284 #define CONFIG_SYS_FLASH_BASE_PHYS      CONFIG_SYS_FLASH_BASE
285 #endif
286
287 #define CONFIG_SYS_NOR0_CSPR_EXT        (0xf)
288 #define CONFIG_SYS_NOR0_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \
289                                 + 0x8000000) | \
290                                 CSPR_PORT_SIZE_16 | \
291                                 CSPR_MSEL_NOR | \
292                                 CSPR_V)
293 #define CONFIG_SYS_NOR1_CSPR_EXT        (0xf)
294 #define CONFIG_SYS_NOR1_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
295                                 CSPR_PORT_SIZE_16 | \
296                                 CSPR_MSEL_NOR | \
297                                 CSPR_V)
298 #define CONFIG_SYS_NOR_AMASK    IFC_AMASK(128*1024*1024)
299 /* NOR Flash Timing Params */
300 #define CONFIG_SYS_NOR_CSOR     CSOR_NAND_TRHZ_80
301 #define CONFIG_SYS_NOR_FTIM0    (FTIM0_NOR_TACSE(0x4) | \
302                                 FTIM0_NOR_TEADC(0x5) | \
303                                 FTIM0_NOR_TEAHC(0x5))
304 #define CONFIG_SYS_NOR_FTIM1    (FTIM1_NOR_TACO(0x35) | \
305                                 FTIM1_NOR_TRAD_NOR(0x1A) |\
306                                 FTIM1_NOR_TSEQRAD_NOR(0x13))
307 #define CONFIG_SYS_NOR_FTIM2    (FTIM2_NOR_TCS(0x4) | \
308                                 FTIM2_NOR_TCH(0x4) | \
309                                 FTIM2_NOR_TWPH(0x0E) | \
310                                 FTIM2_NOR_TWP(0x1c))
311 #define CONFIG_SYS_NOR_FTIM3    0x0
312
313 #define CONFIG_SYS_FLASH_QUIET_TEST
314 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
315
316 #define CONFIG_SYS_MAX_FLASH_BANKS      2       /* number of banks */
317 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device */
318 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
319 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
320
321 #define CONFIG_SYS_FLASH_EMPTY_INFO
322 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS \
323                                         + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS}
324 #define CONFIG_FSL_QIXIS        /* use common QIXIS code */
325 #define QIXIS_BASE              0xffdf0000
326 #ifdef CONFIG_PHYS_64BIT
327 #define QIXIS_BASE_PHYS         (0xf00000000ull | QIXIS_BASE)
328 #else
329 #define QIXIS_BASE_PHYS         QIXIS_BASE
330 #endif
331 #define QIXIS_LBMAP_SWITCH              0x06
332 #define QIXIS_LBMAP_MASK                0x0f
333 #define QIXIS_LBMAP_SHIFT               0
334 #define QIXIS_LBMAP_DFLTBANK            0x00
335 #define QIXIS_LBMAP_ALTBANK             0x04
336 #define QIXIS_RST_CTL_RESET             0x31
337 #define QIXIS_RCFG_CTL_RECONFIG_IDLE    0x20
338 #define QIXIS_RCFG_CTL_RECONFIG_START   0x21
339 #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE   0x08
340 #define QIXIS_RST_FORCE_MEM             0x01
341
342 #define CONFIG_SYS_CSPR3_EXT    (0xf)
343 #define CONFIG_SYS_CSPR3        (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) \
344                                 | CSPR_PORT_SIZE_8 \
345                                 | CSPR_MSEL_GPCM \
346                                 | CSPR_V)
347 #define CONFIG_SYS_AMASK3       IFC_AMASK(4*1024)
348 #define CONFIG_SYS_CSOR3        0x0
349 /* QIXIS Timing parameters for IFC CS3 */
350 #define CONFIG_SYS_CS3_FTIM0            (FTIM0_GPCM_TACSE(0x0e) | \
351                                         FTIM0_GPCM_TEADC(0x0e) | \
352                                         FTIM0_GPCM_TEAHC(0x0e))
353 #define CONFIG_SYS_CS3_FTIM1            (FTIM1_GPCM_TACO(0xff) | \
354                                         FTIM1_GPCM_TRAD(0x3f))
355 #define CONFIG_SYS_CS3_FTIM2            (FTIM2_GPCM_TCS(0x0e) | \
356                                         FTIM2_GPCM_TCH(0x8) | \
357                                         FTIM2_GPCM_TWP(0x1f))
358 #define CONFIG_SYS_CS3_FTIM3            0x0
359
360 #define CONFIG_NAND_FSL_IFC
361 #define CONFIG_SYS_NAND_BASE            0xff800000
362 #ifdef CONFIG_PHYS_64BIT
363 #define CONFIG_SYS_NAND_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_NAND_BASE)
364 #else
365 #define CONFIG_SYS_NAND_BASE_PHYS       CONFIG_SYS_NAND_BASE
366 #endif
367 #define CONFIG_SYS_NAND_CSPR_EXT        (0xf)
368 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
369                                 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
370                                 | CSPR_MSEL_NAND        /* MSEL = NAND */ \
371                                 | CSPR_V)
372 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64*1024)
373
374 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
375                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
376                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
377                                 | CSOR_NAND_RAL_3       /* RAL = 3Byes */ \
378                                 | CSOR_NAND_PGS_2K      /* Page Size = 2K */ \
379                                 | CSOR_NAND_SPRZ_64/* Spare size = 64 */ \
380                                 | CSOR_NAND_PB(64))     /*Pages Per Block = 64*/
381
382 #define CONFIG_SYS_NAND_ONFI_DETECTION
383
384 /* ONFI NAND Flash mode0 Timing Params */
385 #define CONFIG_SYS_NAND_FTIM0           (FTIM0_NAND_TCCST(0x07) | \
386                                         FTIM0_NAND_TWP(0x18)   | \
387                                         FTIM0_NAND_TWCHT(0x07) | \
388                                         FTIM0_NAND_TWH(0x0a))
389 #define CONFIG_SYS_NAND_FTIM1           (FTIM1_NAND_TADLE(0x32) | \
390                                         FTIM1_NAND_TWBE(0x39)  | \
391                                         FTIM1_NAND_TRR(0x0e)   | \
392                                         FTIM1_NAND_TRP(0x18))
393 #define CONFIG_SYS_NAND_FTIM2           (FTIM2_NAND_TRAD(0x0f) | \
394                                         FTIM2_NAND_TREH(0x0a) | \
395                                         FTIM2_NAND_TWHRE(0x1e))
396 #define CONFIG_SYS_NAND_FTIM3           0x0
397
398 #define CONFIG_SYS_NAND_DDR_LAW         11
399 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
400 #define CONFIG_SYS_MAX_NAND_DEVICE      1
401 #define CONFIG_CMD_NAND
402
403 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128 * 1024)
404
405 #if defined(CONFIG_NAND)
406 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NAND_CSPR_EXT
407 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
408 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
409 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
410 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
411 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
412 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
413 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
414 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR0_CSPR_EXT
415 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR0_CSPR
416 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
417 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
418 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
419 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
420 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
421 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
422 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NOR1_CSPR_EXT
423 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NOR1_CSPR
424 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NOR_AMASK
425 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NOR_CSOR
426 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NOR_FTIM0
427 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NOR_FTIM1
428 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NOR_FTIM2
429 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NOR_FTIM3
430 #else
431 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR0_CSPR_EXT
432 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR0_CSPR
433 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
434 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
435 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
436 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
437 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
438 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
439 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR1_CSPR_EXT
440 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR1_CSPR
441 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
442 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
443 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
444 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
445 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
446 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
447 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NAND_CSPR_EXT
448 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NAND_CSPR
449 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NAND_AMASK
450 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NAND_CSOR
451 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NAND_FTIM0
452 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NAND_FTIM1
453 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NAND_FTIM2
454 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NAND_FTIM3
455 #endif
456
457 #ifdef CONFIG_SPL_BUILD
458 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SPL_TEXT_BASE
459 #else
460 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_TEXT_BASE
461 #endif
462
463 #if defined(CONFIG_RAMBOOT_PBL)
464 #define CONFIG_SYS_RAMBOOT
465 #endif
466
467 #define CONFIG_BOARD_EARLY_INIT_R
468 #define CONFIG_MISC_INIT_R
469
470 #define CONFIG_HWCONFIG
471
472 /* define to use L1 as initial stack */
473 #define CONFIG_L1_INIT_RAM
474 #define CONFIG_SYS_INIT_RAM_LOCK
475 #define CONFIG_SYS_INIT_RAM_ADDR        0xfdd00000      /* Initial L1 address */
476 #ifdef CONFIG_PHYS_64BIT
477 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH      0xf
478 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW       0xfe0ec000
479 /* The assembler doesn't like typecast */
480 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
481         ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
482           CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
483 #else
484 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS   0xfe0ec000 /* Initial L1 address */
485 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0
486 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS
487 #endif
488 #define CONFIG_SYS_INIT_RAM_SIZE                0x00004000
489
490 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - \
491                                         GENERATED_GBL_DATA_SIZE)
492 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
493
494 #define CONFIG_SYS_MONITOR_LEN          (768 * 1024)
495 #define CONFIG_SYS_MALLOC_LEN           (10 * 1024 * 1024)
496
497 /* Serial Port */
498 #define CONFIG_CONS_INDEX       1
499 #define CONFIG_SYS_NS16550
500 #define CONFIG_SYS_NS16550_SERIAL
501 #define CONFIG_SYS_NS16550_REG_SIZE     1
502 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
503
504 #define CONFIG_SYS_BAUDRATE_TABLE       \
505         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
506
507 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
508 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
509 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
510 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
511 #define CONFIG_SYS_CONSOLE_IS_IN_ENV    /* determine from environment */
512
513 /* Use the HUSH parser */
514 #define CONFIG_SYS_HUSH_PARSER
515 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
516
517 /* Video */
518 #ifdef CONFIG_PPC_T1024         /* no DIU on T1023 */
519 #define CONFIG_FSL_DIU_FB
520 #ifdef CONFIG_FSL_DIU_FB
521 #define CONFIG_FSL_DIU_CH7301
522 #define CONFIG_SYS_DIU_ADDR     (CONFIG_SYS_CCSRBAR + 0x180000)
523 #define CONFIG_VIDEO
524 #define CONFIG_CMD_BMP
525 #define CONFIG_CFB_CONSOLE
526 #define CONFIG_VIDEO_SW_CURSOR
527 #define CONFIG_VGA_AS_SINGLE_DEVICE
528 #define CONFIG_VIDEO_LOGO
529 #define CONFIG_VIDEO_BMP_LOGO
530 #define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS
531 /*
532  * With CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS, flash I/O is really slow, so
533  * disable empty flash sector detection, which is I/O-intensive.
534  */
535 #undef CONFIG_SYS_FLASH_EMPTY_INFO
536 #endif
537 #endif
538
539 /* pass open firmware flat tree */
540 #define CONFIG_OF_LIBFDT
541 #define CONFIG_OF_BOARD_SETUP
542 #define CONFIG_OF_STDOUT_VIA_ALIAS
543
544 /* new uImage format support */
545 #define CONFIG_FIT
546 #define CONFIG_FIT_VERBOSE      /* enable fit_format_{error,warning}() */
547
548 /* I2C */
549 #define CONFIG_SYS_I2C
550 #define CONFIG_SYS_I2C_FSL              /* Use FSL common I2C driver */
551 #define CONFIG_SYS_FSL_I2C_SPEED        50000   /* I2C speed in Hz */
552 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
553 #define CONFIG_SYS_FSL_I2C2_SPEED       50000   /* I2C speed in Hz */
554 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
555 #define CONFIG_SYS_FSL_I2C_OFFSET       0x118000
556 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x118100
557
558 #define I2C_MUX_PCA_ADDR                0x77
559 #define I2C_MUX_PCA_ADDR_PRI            0x77 /* Primary Mux*/
560 #define I2C_MUX_PCA_ADDR_SEC            0x76 /* Secondary multiplexer */
561 #define I2C_RETIMER_ADDR                0x18
562
563 /* I2C bus multiplexer */
564 #define I2C_MUX_CH_DEFAULT      0x8
565 #define I2C_MUX_CH_DIU          0xC
566 #define I2C_MUX_CH5             0xD
567 #define I2C_MUX_CH7             0xF
568
569 /* LDI/DVI Encoder for display */
570 #define CONFIG_SYS_I2C_LDI_ADDR  0x38
571 #define CONFIG_SYS_I2C_DVI_ADDR  0x75
572
573 /*
574  * RTC configuration
575  */
576 #define RTC
577 #define CONFIG_RTC_DS3231       1
578 #define CONFIG_SYS_I2C_RTC_ADDR 0x68
579
580 /*
581  * eSPI - Enhanced SPI
582  */
583 #define CONFIG_FSL_ESPI
584 #define CONFIG_SPI_FLASH
585 #define CONFIG_SPI_FLASH_STMICRO
586 #ifndef CONFIG_SPL_BUILD
587 #define CONFIG_SPI_FLASH_SST
588 #define CONFIG_SPI_FLASH_EON
589 #endif
590 #define CONFIG_CMD_SF
591 #define CONFIG_SPI_FLASH_BAR
592 #define CONFIG_SF_DEFAULT_SPEED  10000000
593 #define CONFIG_SF_DEFAULT_MODE    0
594
595 /*
596  * General PCIe
597  * Memory space is mapped 1-1, but I/O space must start from 0.
598  */
599 #define CONFIG_PCI              /* Enable PCI/PCIE */
600 #define CONFIG_PCIE1            /* PCIE controler 1 */
601 #define CONFIG_PCIE2            /* PCIE controler 2 */
602 #define CONFIG_PCIE3            /* PCIE controler 3 */
603 #define CONFIG_FSL_PCI_INIT     /* Use common FSL init code */
604 #define CONFIG_SYS_PCI_64BIT    /* enable 64-bit PCI resources */
605 #define CONFIG_PCI_INDIRECT_BRIDGE
606
607 #ifdef CONFIG_PCI
608 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
609 #ifdef CONFIG_PCIE1
610 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
611 #ifdef CONFIG_PHYS_64BIT
612 #define CONFIG_SYS_PCIE1_MEM_BUS        0xe0000000
613 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
614 #else
615 #define CONFIG_SYS_PCIE1_MEM_BUS        0x80000000
616 #define CONFIG_SYS_PCIE1_MEM_PHYS       0x80000000
617 #endif
618 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x10000000      /* 256M */
619 #define CONFIG_SYS_PCIE1_IO_VIRT        0xf8000000
620 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
621 #ifdef CONFIG_PHYS_64BIT
622 #define CONFIG_SYS_PCIE1_IO_PHYS        0xff8000000ull
623 #else
624 #define CONFIG_SYS_PCIE1_IO_PHYS        0xf8000000
625 #endif
626 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
627 #endif
628
629 /* controller 2, Slot 2, tgtid 2, Base address 201000 */
630 #ifdef CONFIG_PCIE2
631 #define CONFIG_SYS_PCIE2_MEM_VIRT       0x90000000
632 #ifdef CONFIG_PHYS_64BIT
633 #define CONFIG_SYS_PCIE2_MEM_BUS        0xe0000000
634 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc10000000ull
635 #else
636 #define CONFIG_SYS_PCIE2_MEM_BUS        0x90000000
637 #define CONFIG_SYS_PCIE2_MEM_PHYS       0x90000000
638 #endif
639 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x10000000      /* 256M */
640 #define CONFIG_SYS_PCIE2_IO_VIRT        0xf8010000
641 #define CONFIG_SYS_PCIE2_IO_BUS         0x00000000
642 #ifdef CONFIG_PHYS_64BIT
643 #define CONFIG_SYS_PCIE2_IO_PHYS        0xff8010000ull
644 #else
645 #define CONFIG_SYS_PCIE2_IO_PHYS        0xf8010000
646 #endif
647 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00010000      /* 64k */
648 #endif
649
650 /* controller 3, Slot 1, tgtid 1, Base address 202000 */
651 #ifdef CONFIG_PCIE3
652 #define CONFIG_SYS_PCIE3_MEM_VIRT       0xa0000000
653 #ifdef CONFIG_PHYS_64BIT
654 #define CONFIG_SYS_PCIE3_MEM_BUS        0xe0000000
655 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc20000000ull
656 #else
657 #define CONFIG_SYS_PCIE3_MEM_BUS        0xa0000000
658 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xa0000000
659 #endif
660 #define CONFIG_SYS_PCIE3_MEM_SIZE       0x10000000      /* 256M */
661 #define CONFIG_SYS_PCIE3_IO_VIRT        0xf8020000
662 #define CONFIG_SYS_PCIE3_IO_BUS         0x00000000
663 #ifdef CONFIG_PHYS_64BIT
664 #define CONFIG_SYS_PCIE3_IO_PHYS        0xff8020000ull
665 #else
666 #define CONFIG_SYS_PCIE3_IO_PHYS        0xf8020000
667 #endif
668 #define CONFIG_SYS_PCIE3_IO_SIZE        0x00010000      /* 64k */
669 #endif
670
671 #define CONFIG_PCI_PNP                  /* do pci plug-and-play */
672 #define CONFIG_E1000
673 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
674 #define CONFIG_DOS_PARTITION
675 #endif  /* CONFIG_PCI */
676
677 /*
678  *SATA
679  */
680 #define CONFIG_FSL_SATA_V2
681 #ifdef CONFIG_FSL_SATA_V2
682 #define CONFIG_LIBATA
683 #define CONFIG_FSL_SATA
684 #define CONFIG_SYS_SATA_MAX_DEVICE      1
685 #define CONFIG_SATA1
686 #define CONFIG_SYS_SATA1                CONFIG_SYS_MPC85xx_SATA1_ADDR
687 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
688 #define CONFIG_LBA48
689 #define CONFIG_CMD_SATA
690 #define CONFIG_DOS_PARTITION
691 #define CONFIG_CMD_EXT2
692 #endif
693
694 /*
695  * USB
696  */
697 #define CONFIG_HAS_FSL_DR_USB
698
699 #ifdef CONFIG_HAS_FSL_DR_USB
700 #define CONFIG_USB_EHCI
701 #define CONFIG_CMD_USB
702 #define CONFIG_USB_STORAGE
703 #define CONFIG_USB_EHCI_FSL
704 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
705 #define CONFIG_CMD_EXT2
706 #endif
707
708 /*
709  * SDHC
710  */
711 #define CONFIG_MMC
712 #ifdef CONFIG_MMC
713 #define CONFIG_FSL_ESDHC
714 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
715 #define CONFIG_CMD_MMC
716 #define CONFIG_GENERIC_MMC
717 #define CONFIG_CMD_EXT2
718 #define CONFIG_CMD_FAT
719 #define CONFIG_DOS_PARTITION
720 #endif
721
722 /* Qman/Bman */
723 #ifndef CONFIG_NOBQFMAN
724 #define CONFIG_SYS_DPAA_QBMAN           /* Support Q/Bman */
725 #define CONFIG_SYS_BMAN_NUM_PORTALS     10
726 #define CONFIG_SYS_BMAN_MEM_BASE        0xf4000000
727 #ifdef CONFIG_PHYS_64BIT
728 #define CONFIG_SYS_BMAN_MEM_PHYS        0xff4000000ull
729 #else
730 #define CONFIG_SYS_BMAN_MEM_PHYS        CONFIG_SYS_BMAN_MEM_BASE
731 #endif
732 #define CONFIG_SYS_BMAN_MEM_SIZE        0x02000000
733 #define CONFIG_SYS_BMAN_SP_CENA_SIZE    0x4000
734 #define CONFIG_SYS_BMAN_SP_CINH_SIZE    0x1000
735 #define CONFIG_SYS_BMAN_CENA_BASE       CONFIG_SYS_BMAN_MEM_BASE
736 #define CONFIG_SYS_BMAN_CENA_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
737 #define CONFIG_SYS_BMAN_CINH_BASE       (CONFIG_SYS_BMAN_MEM_BASE + \
738                                         CONFIG_SYS_BMAN_CENA_SIZE)
739 #define CONFIG_SYS_BMAN_CINH_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
740 #define CONFIG_SYS_BMAN_SWP_ISDR_REG    0xE08
741 #define CONFIG_SYS_QMAN_NUM_PORTALS     10
742 #define CONFIG_SYS_QMAN_MEM_BASE        0xf6000000
743 #ifdef CONFIG_PHYS_64BIT
744 #define CONFIG_SYS_QMAN_MEM_PHYS        0xff6000000ull
745 #else
746 #define CONFIG_SYS_QMAN_MEM_PHYS        CONFIG_SYS_QMAN_MEM_BASE
747 #endif
748 #define CONFIG_SYS_QMAN_MEM_SIZE        0x02000000
749 #define CONFIG_SYS_QMAN_SP_CENA_SIZE    0x4000
750 #define CONFIG_SYS_QMAN_SP_CINH_SIZE    0x1000
751 #define CONFIG_SYS_QMAN_CENA_BASE       CONFIG_SYS_QMAN_MEM_BASE
752 #define CONFIG_SYS_QMAN_CENA_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
753 #define CONFIG_SYS_QMAN_CINH_BASE       (CONFIG_SYS_QMAN_MEM_BASE + \
754                                         CONFIG_SYS_QMAN_CENA_SIZE)
755 #define CONFIG_SYS_QMAN_CINH_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
756 #define CONFIG_SYS_QMAN_SWP_ISDR_REG    0xE08
757
758 #define CONFIG_SYS_DPAA_FMAN
759
760 #define CONFIG_QE
761 #define CONFIG_U_QE
762 /* Default address of microcode for the Linux FMan driver */
763 #if defined(CONFIG_SPIFLASH)
764 /*
765  * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
766  * env, so we got 0x110000.
767  */
768 #define CONFIG_SYS_QE_FW_IN_SPIFLASH
769 #define CONFIG_SYS_FMAN_FW_ADDR 0x110000
770 #define CONFIG_SYS_QE_FW_ADDR   0x130000
771 #elif defined(CONFIG_SDCARD)
772 /*
773  * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
774  * about 1MB (2048 blocks), Env is stored after the image, and the env size is
775  * 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 2080(0x820).
776  */
777 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC
778 #define CONFIG_SYS_FMAN_FW_ADDR         (512 * 0x820)
779 #define CONFIG_SYS_QE_FW_ADDR           (512 * 0x920)
780 #elif defined(CONFIG_NAND)
781 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND
782 #define CONFIG_SYS_FMAN_FW_ADDR         (11 * CONFIG_SYS_NAND_BLOCK_SIZE)
783 #define CONFIG_SYS_QE_FW_ADDR           (12 * CONFIG_SYS_NAND_BLOCK_SIZE)
784 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
785 /*
786  * Slave has no ucode locally, it can fetch this from remote. When implementing
787  * in two corenet boards, slave's ucode could be stored in master's memory
788  * space, the address can be mapped from slave TLB->slave LAW->
789  * slave SRIO or PCIE outbound window->master inbound window->
790  * master LAW->the ucode address in master's memory space.
791  */
792 #define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE
793 #define CONFIG_SYS_FMAN_FW_ADDR 0xFFE00000
794 #else
795 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
796 #define CONFIG_SYS_FMAN_FW_ADDR         0xEFF00000
797 #define CONFIG_SYS_QE_FW_ADDR           0xEFE00000
798 #endif
799 #define CONFIG_SYS_QE_FMAN_FW_LENGTH    0x10000
800 #define CONFIG_SYS_FDT_PAD              (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
801 #endif /* CONFIG_NOBQFMAN */
802
803 #ifdef CONFIG_SYS_DPAA_FMAN
804 #define CONFIG_FMAN_ENET
805 #define CONFIG_PHYLIB_10G
806 #define CONFIG_PHY_VITESSE
807 #define CONFIG_PHY_REALTEK
808 #define CONFIG_PHY_TERANETICS
809 #define RGMII_PHY1_ADDR         0x1
810 #define RGMII_PHY2_ADDR         0x2
811 #define SGMII_CARD_AQ_PHY_ADDR_S3 0x3
812 #define SGMII_CARD_AQ_PHY_ADDR_S4 0x4
813 #define SGMII_CARD_AQ_PHY_ADDR_S5 0x5
814 #define SGMII_CARD_PORT1_PHY_ADDR 0x1C
815 #define SGMII_CARD_PORT2_PHY_ADDR 0x1D
816 #define SGMII_CARD_PORT3_PHY_ADDR 0x1E
817 #define SGMII_CARD_PORT4_PHY_ADDR 0x1F
818 #endif
819
820 #ifdef CONFIG_FMAN_ENET
821 #define CONFIG_MII              /* MII PHY management */
822 #define CONFIG_ETHPRIME         "FM1@DTSEC4"
823 #define CONFIG_PHY_GIGE         /* Include GbE speed/duplex detection */
824 #endif
825
826 /*
827  * Dynamic MTD Partition support with mtdparts
828  */
829 #ifndef CONFIG_SYS_NO_FLASH
830 #define CONFIG_MTD_DEVICE
831 #define CONFIG_MTD_PARTITIONS
832 #define CONFIG_CMD_MTDPARTS
833 #define CONFIG_FLASH_CFI_MTD
834 #define MTDIDS_DEFAULT    "nor0=fe8000000.nor,nand0=fff800000.flash," \
835                           "spi0=spife110000.0"
836 #define MTDPARTS_DEFAULT  "mtdparts=fe8000000.nor:1m(uboot),5m(kernel)," \
837                           "128k(dtb),96m(fs),-(user);"\
838                           "fff800000.flash:2m(uboot),9m(kernel),"\
839                           "128k(dtb),96m(fs),-(user);spife110000.0:" \
840                           "2m(uboot),9m(kernel),128k(dtb),-(user)"
841 #endif
842
843 /*
844  * Environment
845  */
846 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
847 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
848
849 /*
850  * Command line configuration.
851  */
852 #include <config_cmd_default.h>
853
854 #define CONFIG_CMD_DATE
855 #define CONFIG_CMD_DHCP
856 #define CONFIG_CMD_EEPROM
857 #define CONFIG_CMD_ELF
858 #define CONFIG_CMD_ERRATA
859 #define CONFIG_CMD_GREPENV
860 #define CONFIG_CMD_IRQ
861 #define CONFIG_CMD_I2C
862 #define CONFIG_CMD_MII
863 #define CONFIG_CMD_PING
864 #define CONFIG_CMD_REGINFO
865 #define CONFIG_CMD_SETEXPR
866
867 #ifdef CONFIG_PCI
868 #define CONFIG_CMD_PCI
869 #define CONFIG_CMD_NET
870 #endif
871
872 /*
873  * Miscellaneous configurable options
874  */
875 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
876 #define CONFIG_CMDLINE_EDITING                  /* Command-line editing */
877 #define CONFIG_AUTO_COMPLETE                    /* add autocompletion support */
878 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
879 #define CONFIG_SYS_PROMPT       "=> "           /* Monitor Command Prompt */
880 #ifdef CONFIG_CMD_KGDB
881 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size */
882 #else
883 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size */
884 #endif
885 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
886 #define CONFIG_SYS_MAXARGS      16              /* max number of command args */
887 #define CONFIG_SYS_BARGSIZE  CONFIG_SYS_CBSIZE  /* Boot Argument Buffer Size */
888
889 /*
890  * For booting Linux, the board info and command line data
891  * have to be in the first 64 MB of memory, since this is
892  * the maximum mapped by the Linux kernel during initialization.
893  */
894 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial map for Linux*/
895 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
896
897 #ifdef CONFIG_CMD_KGDB
898 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
899 #endif
900
901 /*
902  * Environment Configuration
903  */
904 #define CONFIG_ROOTPATH         "/opt/nfsroot"
905 #define CONFIG_BOOTFILE         "uImage"
906 #define CONFIG_UBOOTPATH        "u-boot.bin" /* U-Boot image on TFTP server */
907 #define CONFIG_LOADADDR         1000000 /* default location for tftp, bootm */
908 #define CONFIG_BOOTDELAY        10      /* -1 disables auto-boot */
909 #define CONFIG_BAUDRATE         115200
910 #define __USB_PHY_TYPE          utmi
911
912
913 #define CONFIG_EXTRA_ENV_SETTINGS                               \
914         "hwconfig=fsl_ddr:ctlr_intlv=cacheline,bank_intlv=cs0_cs1;\0"  \
915         "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0" \
916         "bootargs=root=/dev/ram rw console=ttyS0,115200\0" \
917         "ramdiskfile=t1024qds/ramdisk.uboot\0"                  \
918         "fdtfile=t1024qds/t1024qds.dtb\0"                       \
919         "netdev=eth0\0"                                         \
920         "video-mode=fslfb:1024x768-32@60,monitor=dvi\0"         \
921         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"             \
922         "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"     \
923         "tftpflash=tftpboot $loadaddr $uboot && "               \
924         "protect off $ubootaddr +$filesize && "                 \
925         "erase $ubootaddr +$filesize && "                       \
926         "cp.b $loadaddr $ubootaddr $filesize && "               \
927         "protect on $ubootaddr +$filesize && "                  \
928         "cmp.b $loadaddr $ubootaddr $filesize\0"                \
929         "consoledev=ttyS0\0"                                    \
930         "ramdiskaddr=2000000\0"                                 \
931         "fdtaddr=d00000\0"                                      \
932         "bdev=sda3\0"
933
934 #define CONFIG_LINUX                                    \
935         "setenv bootargs root=/dev/ram rw "             \
936         "console=$consoledev,$baudrate $othbootargs;"   \
937         "setenv ramdiskaddr 0x02000000;"                \
938         "setenv fdtaddr 0x00c00000;"                    \
939         "setenv loadaddr 0x1000000;"                    \
940         "bootm $loadaddr $ramdiskaddr $fdtaddr"
941
942 #define CONFIG_NFSBOOTCOMMAND                   \
943         "setenv bootargs root=/dev/nfs rw "     \
944         "nfsroot=$serverip:$rootpath "          \
945         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
946         "console=$consoledev,$baudrate $othbootargs;"   \
947         "tftp $loadaddr $bootfile;"             \
948         "tftp $fdtaddr $fdtfile;"               \
949         "bootm $loadaddr - $fdtaddr"
950
951 #define CONFIG_BOOTCOMMAND      CONFIG_LINUX
952
953 #ifdef CONFIG_SECURE_BOOT
954 #include <asm/fsl_secure_boot.h>
955 #endif
956
957 #endif  /* __T1024QDS_H */