include/configs/T102xQDS.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright 2014 Freescale Semiconductor, Inc.
   4  */
   5
   6 /*
   7  * T1024/T1023 QDS board configuration file
   8  */
   9
  10 #ifndef __T1024QDS_H
  11 #define __T1024QDS_H
  12
  13 /* High Level Configuration Options */
  14 #define CONFIG_SYS_BOOK3E_HV            /* Category E.HV supported */
  15 #define CONFIG_ENABLE_36BIT_PHYS
  16
  17 #ifdef CONFIG_PHYS_64BIT
  18 #define CONFIG_ADDR_MAP         1
  19 #define CONFIG_SYS_NUM_ADDR_MAP 64      /* number of TLB1 entries */
  20 #endif
  21
  22 #define CONFIG_SYS_FSL_CPC              /* Corenet Platform Cache */
  23 #define CONFIG_SYS_NUM_CPC              CONFIG_SYS_NUM_DDR_CTLRS
  24
  25 #define CONFIG_ENV_OVERWRITE
  26
  27 #define CONFIG_DEEP_SLEEP
  28
  29 #ifdef CONFIG_RAMBOOT_PBL
  30 #define CONFIG_SYS_FSL_PBL_PBI board/freescale/t102xqds/t1024_pbi.cfg
  31 #define CONFIG_SPL_FLUSH_IMAGE
  32 #define CONFIG_SPL_TEXT_BASE            0xFFFD8000
  33 #define CONFIG_SPL_PAD_TO               0x40000
  34 #define CONFIG_SPL_MAX_SIZE             0x28000
  35 #define RESET_VECTOR_OFFSET             0x27FFC
  36 #define BOOT_PAGE_OFFSET                0x27000
  37 #ifdef CONFIG_SPL_BUILD
  38 #define CONFIG_SPL_SKIP_RELOCATE
  39 #define CONFIG_SPL_COMMON_INIT_DDR
  40 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
  41 #endif
  42
  43 #ifdef CONFIG_NAND
  44 #define CONFIG_SYS_NAND_U_BOOT_SIZE     (768 << 10)
  45 #define CONFIG_SYS_NAND_U_BOOT_DST      0x00200000
  46 #define CONFIG_SYS_NAND_U_BOOT_START    0x00200000
  47 #define CONFIG_SYS_NAND_U_BOOT_OFFS     (256 << 10)
  48 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
  49 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xqds/t1024_nand_rcw.cfg
  50 #define CONFIG_SPL_NAND_BOOT
  51 #endif
  52
  53 #ifdef CONFIG_SPIFLASH
  54 #define CONFIG_RESET_VECTOR_ADDRESS             0x200FFC
  55 #define CONFIG_SPL_SPI_FLASH_MINIMAL
  56 #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE        (768 << 10)
  57 #define CONFIG_SYS_SPI_FLASH_U_BOOT_DST         (0x00200000)
  58 #define CONFIG_SYS_SPI_FLASH_U_BOOT_START       (0x00200000)
  59 #define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS        (256 << 10)
  60 #define CONFIG_SYS_LDSCRIPT             "arch/powerpc/cpu/mpc85xx/u-boot.lds"
  61 #ifndef CONFIG_SPL_BUILD
  62 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
  63 #endif
  64 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xqds/t1024_spi_rcw.cfg
  65 #define CONFIG_SPL_SPI_BOOT
  66 #endif
  67
  68 #ifdef CONFIG_SDCARD
  69 #define CONFIG_RESET_VECTOR_ADDRESS             0x200FFC
  70 #define CONFIG_SYS_MMC_U_BOOT_SIZE      (768 << 10)
  71 #define CONFIG_SYS_MMC_U_BOOT_DST       (0x00200000)
  72 #define CONFIG_SYS_MMC_U_BOOT_START     (0x00200000)
  73 #define CONFIG_SYS_MMC_U_BOOT_OFFS      (260 << 10)
  74 #define CONFIG_SYS_LDSCRIPT             "arch/powerpc/cpu/mpc85xx/u-boot.lds"
  75 #ifndef CONFIG_SPL_BUILD
  76 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
  77 #endif
  78 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xqds/t1024_sd_rcw.cfg
  79 #define CONFIG_SPL_MMC_BOOT
  80 #endif
  81
  82 #endif /* CONFIG_RAMBOOT_PBL */
  83
  84 #ifndef CONFIG_RESET_VECTOR_ADDRESS
  85 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
  86 #endif
  87
  88 /* PCIe Boot - Master */
  89 #define CONFIG_SRIO_PCIE_BOOT_MASTER
  90 /*
  91  * for slave u-boot IMAGE instored in master memory space,
  92  * PHYS must be aligned based on the SIZE
  93  */
  94 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff00000ull
  95 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE     0x100000 /* 1M */
  96 #ifdef CONFIG_PHYS_64BIT
  97 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef200000ull
  98 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff00000ull
  99 #else
 100 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xef200000
 101 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0xfff00000
 102 #endif
 103 /*
 104  * for slave UCODE and ENV instored in master memory space,
 105  * PHYS must be aligned based on the SIZE
 106  */
 107 #ifdef CONFIG_PHYS_64BIT
 108 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef100000ull
 109 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS  0x3ffe00000ull
 110 #else
 111 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xef100000
 112 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS  0xffe00000
 113 #endif
 114 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE     0x40000 /* 256K */
 115 /* slave core release by master*/
 116 #define CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET 0xe00e4
 117 #define CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK 0x00000001 /* release core 0 */
 118
 119 /* PCIe Boot - Slave */
 120 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
 121 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR 0xFFE00000
 122 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS \
 123                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR)
 124 /* Set 1M boot space for PCIe boot */
 125 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_SYS_TEXT_BASE & 0xfff00000)
 126 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS       \
 127                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR)
 128 #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc
 129 #endif
 130
 131 #if defined(CONFIG_SPIFLASH)
 132 #define CONFIG_ENV_SPI_BUS              0
 133 #define CONFIG_ENV_SPI_CS               0
 134 #define CONFIG_ENV_SPI_MAX_HZ           10000000
 135 #define CONFIG_ENV_SPI_MODE             0
 136 #define CONFIG_ENV_SIZE                 0x2000          /* 8KB */
 137 #define CONFIG_ENV_OFFSET               0x100000        /* 1MB */
 138 #define CONFIG_ENV_SECT_SIZE            0x10000
 139 #elif defined(CONFIG_SDCARD)
 140 #define CONFIG_SYS_MMC_ENV_DEV          0
 141 #define CONFIG_ENV_SIZE                 0x2000
 142 #define CONFIG_ENV_OFFSET               (512 * 0x800)
 143 #elif defined(CONFIG_NAND)
 144 #define CONFIG_ENV_SIZE                 0x2000
 145 #define CONFIG_ENV_OFFSET               (10 * CONFIG_SYS_NAND_BLOCK_SIZE)
 146 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
 147 #define CONFIG_ENV_ADDR         0xffe20000
 148 #define CONFIG_ENV_SIZE         0x2000
 149 #elif defined(CONFIG_ENV_IS_NOWHERE)
 150 #define CONFIG_ENV_SIZE         0x2000
 151 #else
 152 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 153 #define CONFIG_ENV_SIZE         0x2000
 154 #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
 155 #endif
 156
 157 #ifndef __ASSEMBLY__
 158 unsigned long get_board_sys_clk(void);
 159 unsigned long get_board_ddr_clk(void);
 160 #endif
 161
 162 #define CONFIG_SYS_CLK_FREQ     get_board_sys_clk()
 163 #define CONFIG_DDR_CLK_FREQ     get_board_ddr_clk()
 164
 165 /*
 166  * These can be toggled for performance analysis, otherwise use default.
 167  */
 168 #define CONFIG_SYS_CACHE_STASHING
 169 #define CONFIG_BACKSIDE_L2_CACHE
 170 #define CONFIG_SYS_INIT_L2CSR0          L2CSR0_L2E
 171 #define CONFIG_BTB                      /* toggle branch predition */
 172 #define CONFIG_DDR_ECC
 173 #ifdef CONFIG_DDR_ECC
 174 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
 175 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
 176 #endif
 177
 178 #define CONFIG_SYS_MEMTEST_START        0x00200000 /* memtest works on */
 179 #define CONFIG_SYS_MEMTEST_END          0x00400000
 180
 181 /*
 182  *  Config the L3 Cache as L3 SRAM
 183  */
 184 #define CONFIG_SYS_INIT_L3_ADDR         0xFFFC0000
 185 #define CONFIG_SYS_L3_SIZE              (256 << 10)
 186 #define CONFIG_SPL_GD_ADDR              (CONFIG_SYS_INIT_L3_ADDR + 32 * 1024)
 187 #ifdef CONFIG_RAMBOOT_PBL
 188 #define CONFIG_ENV_ADDR                 (CONFIG_SPL_GD_ADDR + 4 * 1024)
 189 #endif
 190 #define CONFIG_SPL_RELOC_MALLOC_ADDR    (CONFIG_SPL_GD_ADDR + 12 * 1024)
 191 #define CONFIG_SPL_RELOC_MALLOC_SIZE    (30 << 10)
 192 #define CONFIG_SPL_RELOC_STACK          (CONFIG_SPL_GD_ADDR + 64 * 1024)
 193
 194 #ifdef CONFIG_PHYS_64BIT
 195 #define CONFIG_SYS_DCSRBAR              0xf0000000
 196 #define CONFIG_SYS_DCSRBAR_PHYS         0xf00000000ull
 197 #endif
 198
 199 /* EEPROM */
 200 #define CONFIG_ID_EEPROM
 201 #define CONFIG_SYS_I2C_EEPROM_NXID
 202 #define CONFIG_SYS_EEPROM_BUS_NUM       0
 203 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x57
 204 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  1
 205 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
 206 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
 207
 208 /*
 209  * DDR Setup
 210  */
 211 #define CONFIG_VERY_BIG_RAM
 212 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 213 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 214 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 215 #define CONFIG_CHIP_SELECTS_PER_CTRL    (4 * CONFIG_DIMM_SLOTS_PER_CTLR)
 216 #define CONFIG_DDR_SPD
 217
 218 #define CONFIG_SYS_SPD_BUS_NUM  0
 219 #define SPD_EEPROM_ADDRESS      0x51
 220
 221 #define CONFIG_SYS_SDRAM_SIZE   4096    /* for fixed parameter use */
 222
 223 /*
 224  * IFC Definitions
 225  */
 226 #define CONFIG_SYS_FLASH_BASE   0xe0000000
 227 #ifdef CONFIG_PHYS_64BIT
 228 #define CONFIG_SYS_FLASH_BASE_PHYS      (0xf00000000ull | CONFIG_SYS_FLASH_BASE)
 229 #else
 230 #define CONFIG_SYS_FLASH_BASE_PHYS      CONFIG_SYS_FLASH_BASE
 231 #endif
 232
 233 #define CONFIG_SYS_NOR0_CSPR_EXT        (0xf)
 234 #define CONFIG_SYS_NOR0_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \
 235                                 + 0x8000000) | \
 236                                 CSPR_PORT_SIZE_16 | \
 237                                 CSPR_MSEL_NOR | \
 238                                 CSPR_V)
 239 #define CONFIG_SYS_NOR1_CSPR_EXT        (0xf)
 240 #define CONFIG_SYS_NOR1_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
 241                                 CSPR_PORT_SIZE_16 | \
 242                                 CSPR_MSEL_NOR | \
 243                                 CSPR_V)
 244 #define CONFIG_SYS_NOR_AMASK    IFC_AMASK(128*1024*1024)
 245 /* NOR Flash Timing Params */
 246 #define CONFIG_SYS_NOR_CSOR     CSOR_NAND_TRHZ_80
 247 #define CONFIG_SYS_NOR_FTIM0    (FTIM0_NOR_TACSE(0x4) | \
 248                                 FTIM0_NOR_TEADC(0x5) | \
 249                                 FTIM0_NOR_TEAHC(0x5))
 250 #define CONFIG_SYS_NOR_FTIM1    (FTIM1_NOR_TACO(0x35) | \
 251                                 FTIM1_NOR_TRAD_NOR(0x1A) |\
 252                                 FTIM1_NOR_TSEQRAD_NOR(0x13))
 253 #define CONFIG_SYS_NOR_FTIM2    (FTIM2_NOR_TCS(0x4) | \
 254                                 FTIM2_NOR_TCH(0x4) | \
 255                                 FTIM2_NOR_TWPH(0x0E) | \
 256                                 FTIM2_NOR_TWP(0x1c))
 257 #define CONFIG_SYS_NOR_FTIM3    0x0
 258
 259 #define CONFIG_SYS_FLASH_QUIET_TEST
 260 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
 261
 262 #define CONFIG_SYS_MAX_FLASH_BANKS      2       /* number of banks */
 263 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device */
 264 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 265 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 266
 267 #define CONFIG_SYS_FLASH_EMPTY_INFO
 268 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS \
 269                                         + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS}
 270 #define CONFIG_FSL_QIXIS        /* use common QIXIS code */
 271 #define QIXIS_BASE              0xffdf0000
 272 #ifdef CONFIG_PHYS_64BIT
 273 #define QIXIS_BASE_PHYS         (0xf00000000ull | QIXIS_BASE)
 274 #else
 275 #define QIXIS_BASE_PHYS         QIXIS_BASE
 276 #endif
 277 #define QIXIS_LBMAP_SWITCH              0x06
 278 #define QIXIS_LBMAP_MASK                0x0f
 279 #define QIXIS_LBMAP_SHIFT               0
 280 #define QIXIS_LBMAP_DFLTBANK            0x00
 281 #define QIXIS_LBMAP_ALTBANK             0x04
 282 #define QIXIS_RST_CTL_RESET             0x31
 283 #define QIXIS_RCFG_CTL_RECONFIG_IDLE    0x20
 284 #define QIXIS_RCFG_CTL_RECONFIG_START   0x21
 285 #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE   0x08
 286 #define QIXIS_RST_FORCE_MEM             0x01
 287
 288 #define CONFIG_SYS_CSPR3_EXT    (0xf)
 289 #define CONFIG_SYS_CSPR3        (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) \
 290                                 | CSPR_PORT_SIZE_8 \
 291                                 | CSPR_MSEL_GPCM \
 292                                 | CSPR_V)
 293 #define CONFIG_SYS_AMASK3       IFC_AMASK(64 * 1024)
 294 #define CONFIG_SYS_CSOR3        0x0
 295 /* QIXIS Timing parameters for IFC CS3 */
 296 #define CONFIG_SYS_CS3_FTIM0            (FTIM0_GPCM_TACSE(0x0e) | \
 297                                         FTIM0_GPCM_TEADC(0x0e) | \
 298                                         FTIM0_GPCM_TEAHC(0x0e))
 299 #define CONFIG_SYS_CS3_FTIM1            (FTIM1_GPCM_TACO(0xff) | \
 300                                         FTIM1_GPCM_TRAD(0x3f))
 301 #define CONFIG_SYS_CS3_FTIM2            (FTIM2_GPCM_TCS(0x0e) | \
 302                                         FTIM2_GPCM_TCH(0x8) | \
 303                                         FTIM2_GPCM_TWP(0x1f))
 304 #define CONFIG_SYS_CS3_FTIM3            0x0
 305
 306 #define CONFIG_NAND_FSL_IFC
 307 #define CONFIG_SYS_NAND_BASE            0xff800000
 308 #ifdef CONFIG_PHYS_64BIT
 309 #define CONFIG_SYS_NAND_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_NAND_BASE)
 310 #else
 311 #define CONFIG_SYS_NAND_BASE_PHYS       CONFIG_SYS_NAND_BASE
 312 #endif
 313 #define CONFIG_SYS_NAND_CSPR_EXT        (0xf)
 314 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 315                                 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
 316                                 | CSPR_MSEL_NAND        /* MSEL = NAND */ \
 317                                 | CSPR_V)
 318 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64*1024)
 319
 320 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 321                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 322                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
 323                                 | CSOR_NAND_RAL_3       /* RAL = 3Byes */ \
 324                                 | CSOR_NAND_PGS_2K      /* Page Size = 2K */ \
 325                                 | CSOR_NAND_SPRZ_64/* Spare size = 64 */ \
 326                                 | CSOR_NAND_PB(64))     /*Pages Per Block = 64*/
 327
 328 #define CONFIG_SYS_NAND_ONFI_DETECTION
 329
 330 /* ONFI NAND Flash mode0 Timing Params */
 331 #define CONFIG_SYS_NAND_FTIM0           (FTIM0_NAND_TCCST(0x07) | \
 332                                         FTIM0_NAND_TWP(0x18)   | \
 333                                         FTIM0_NAND_TWCHT(0x07) | \
 334                                         FTIM0_NAND_TWH(0x0a))
 335 #define CONFIG_SYS_NAND_FTIM1           (FTIM1_NAND_TADLE(0x32) | \
 336                                         FTIM1_NAND_TWBE(0x39)  | \
 337                                         FTIM1_NAND_TRR(0x0e)   | \
 338                                         FTIM1_NAND_TRP(0x18))
 339 #define CONFIG_SYS_NAND_FTIM2           (FTIM2_NAND_TRAD(0x0f) | \
 340                                         FTIM2_NAND_TREH(0x0a) | \
 341                                         FTIM2_NAND_TWHRE(0x1e))
 342 #define CONFIG_SYS_NAND_FTIM3           0x0
 343
 344 #define CONFIG_SYS_NAND_DDR_LAW         11
 345 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
 346 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 347
 348 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128 * 1024)
 349
 350 #if defined(CONFIG_NAND)
 351 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NAND_CSPR_EXT
 352 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
 353 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
 354 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
 355 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
 356 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
 357 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
 358 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
 359 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 360 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR0_CSPR
 361 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
 362 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 363 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 364 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 365 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 366 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 367 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NOR1_CSPR_EXT
 368 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NOR1_CSPR
 369 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NOR_AMASK
 370 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NOR_CSOR
 371 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NOR_FTIM0
 372 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NOR_FTIM1
 373 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NOR_FTIM2
 374 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NOR_FTIM3
 375 #else
 376 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 377 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR0_CSPR
 378 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 379 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 380 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 381 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 382 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 383 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 384 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR1_CSPR_EXT
 385 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR1_CSPR
 386 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
 387 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 388 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 389 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 390 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 391 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 392 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NAND_CSPR_EXT
 393 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NAND_CSPR
 394 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NAND_AMASK
 395 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NAND_CSOR
 396 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NAND_FTIM0
 397 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NAND_FTIM1
 398 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NAND_FTIM2
 399 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NAND_FTIM3
 400 #endif
 401
 402 #ifdef CONFIG_SPL_BUILD
 403 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SPL_TEXT_BASE
 404 #else
 405 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_TEXT_BASE
 406 #endif
 407
 408 #if defined(CONFIG_RAMBOOT_PBL)
 409 #define CONFIG_SYS_RAMBOOT
 410 #endif
 411
 412 #define CONFIG_HWCONFIG
 413
 414 /* define to use L1 as initial stack */
 415 #define CONFIG_L1_INIT_RAM
 416 #define CONFIG_SYS_INIT_RAM_LOCK
 417 #define CONFIG_SYS_INIT_RAM_ADDR        0xfdd00000      /* Initial L1 address */
 418 #ifdef CONFIG_PHYS_64BIT
 419 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH      0xf
 420 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW       0xfe03c000
 421 /* The assembler doesn't like typecast */
 422 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
 423         ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
 424           CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
 425 #else
 426 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS   0xfe03c000 /* Initial L1 address */
 427 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0
 428 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS
 429 #endif
 430 #define CONFIG_SYS_INIT_RAM_SIZE                0x00004000
 431
 432 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - \
 433                                         GENERATED_GBL_DATA_SIZE)
 434 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 435
 436 #define CONFIG_SYS_MONITOR_LEN          (768 * 1024)
 437 #define CONFIG_SYS_MALLOC_LEN           (10 * 1024 * 1024)
 438
 439 /* Serial Port */
 440 #define CONFIG_SYS_NS16550_SERIAL
 441 #define CONFIG_SYS_NS16550_REG_SIZE     1
 442 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
 443
 444 #define CONFIG_SYS_BAUDRATE_TABLE       \
 445         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 446
 447 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
 448 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
 449 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
 450 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
 451
 452 /* Video */
 453 #ifdef CONFIG_ARCH_T1024                /* no DIU on T1023 */
 454 #define CONFIG_FSL_DIU_FB
 455 #ifdef CONFIG_FSL_DIU_FB
 456 #define CONFIG_FSL_DIU_CH7301
 457 #define CONFIG_SYS_DIU_ADDR     (CONFIG_SYS_CCSRBAR + 0x180000)
 458 #define CONFIG_VIDEO_LOGO
 459 #define CONFIG_VIDEO_BMP_LOGO
 460 #define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS
 461 /*
 462  * With CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS, flash I/O is really slow, so
 463  * disable empty flash sector detection, which is I/O-intensive.
 464  */
 465 #undef CONFIG_SYS_FLASH_EMPTY_INFO
 466 #endif
 467 #endif
 468
 469 /* I2C */
 470 #define CONFIG_SYS_I2C
 471 #define CONFIG_SYS_I2C_FSL              /* Use FSL common I2C driver */
 472 #define CONFIG_SYS_FSL_I2C_SPEED        50000   /* I2C speed in Hz */
 473 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 474 #define CONFIG_SYS_FSL_I2C2_SPEED       50000   /* I2C speed in Hz */
 475 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
 476 #define CONFIG_SYS_FSL_I2C_OFFSET       0x118000
 477 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x118100
 478
 479 #define I2C_MUX_PCA_ADDR                0x77
 480 #define I2C_MUX_PCA_ADDR_PRI            0x77 /* Primary Mux*/
 481 #define I2C_MUX_PCA_ADDR_SEC            0x76 /* Secondary multiplexer */
 482 #define I2C_RETIMER_ADDR                0x18
 483
 484 /* I2C bus multiplexer */
 485 #define I2C_MUX_CH_DEFAULT      0x8
 486 #define I2C_MUX_CH_DIU          0xC
 487 #define I2C_MUX_CH5             0xD
 488 #define I2C_MUX_CH7             0xF
 489
 490 /* LDI/DVI Encoder for display */
 491 #define CONFIG_SYS_I2C_LDI_ADDR  0x38
 492 #define CONFIG_SYS_I2C_DVI_ADDR  0x75
 493
 494 /*
 495  * RTC configuration
 496  */
 497 #define RTC
 498 #define CONFIG_RTC_DS3231       1
 499 #define CONFIG_SYS_I2C_RTC_ADDR 0x68
 500
 501 /*
 502  * eSPI - Enhanced SPI
 503  */
 504 #define CONFIG_SPI_FLASH_BAR
 505 #define CONFIG_SF_DEFAULT_SPEED  10000000
 506 #define CONFIG_SF_DEFAULT_MODE    0
 507
 508 /*
 509  * General PCIe
 510  * Memory space is mapped 1-1, but I/O space must start from 0.
 511  */
 512 #define CONFIG_PCIE1            /* PCIE controller 1 */
 513 #define CONFIG_PCIE2            /* PCIE controller 2 */
 514 #define CONFIG_PCIE3            /* PCIE controller 3 */
 515 #define CONFIG_FSL_PCI_INIT     /* Use common FSL init code */
 516 #define CONFIG_SYS_PCI_64BIT    /* enable 64-bit PCI resources */
 517 #define CONFIG_PCI_INDIRECT_BRIDGE
 518
 519 #ifdef CONFIG_PCI
 520 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
 521 #ifdef CONFIG_PCIE1
 522 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
 523 #ifdef CONFIG_PHYS_64BIT
 524 #define CONFIG_SYS_PCIE1_MEM_BUS        0xe0000000
 525 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
 526 #else
 527 #define CONFIG_SYS_PCIE1_MEM_BUS        0x80000000
 528 #define CONFIG_SYS_PCIE1_MEM_PHYS       0x80000000
 529 #endif
 530 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x10000000      /* 256M */
 531 #define CONFIG_SYS_PCIE1_IO_VIRT        0xf8000000
 532 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 533 #ifdef CONFIG_PHYS_64BIT
 534 #define CONFIG_SYS_PCIE1_IO_PHYS        0xff8000000ull
 535 #else
 536 #define CONFIG_SYS_PCIE1_IO_PHYS        0xf8000000
 537 #endif
 538 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 539 #endif
 540
 541 /* controller 2, Slot 2, tgtid 2, Base address 201000 */
 542 #ifdef CONFIG_PCIE2
 543 #define CONFIG_SYS_PCIE2_MEM_VIRT       0x90000000
 544 #ifdef CONFIG_PHYS_64BIT
 545 #define CONFIG_SYS_PCIE2_MEM_BUS        0xe0000000
 546 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc10000000ull
 547 #else
 548 #define CONFIG_SYS_PCIE2_MEM_BUS        0x90000000
 549 #define CONFIG_SYS_PCIE2_MEM_PHYS       0x90000000
 550 #endif
 551 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x10000000      /* 256M */
 552 #define CONFIG_SYS_PCIE2_IO_VIRT        0xf8010000
 553 #define CONFIG_SYS_PCIE2_IO_BUS         0x00000000
 554 #ifdef CONFIG_PHYS_64BIT
 555 #define CONFIG_SYS_PCIE2_IO_PHYS        0xff8010000ull
 556 #else
 557 #define CONFIG_SYS_PCIE2_IO_PHYS        0xf8010000
 558 #endif
 559 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00010000      /* 64k */
 560 #endif
 561
 562 /* controller 3, Slot 1, tgtid 1, Base address 202000 */
 563 #ifdef CONFIG_PCIE3
 564 #define CONFIG_SYS_PCIE3_MEM_VIRT       0xa0000000
 565 #ifdef CONFIG_PHYS_64BIT
 566 #define CONFIG_SYS_PCIE3_MEM_BUS        0xe0000000
 567 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc20000000ull
 568 #else
 569 #define CONFIG_SYS_PCIE3_MEM_BUS        0xa0000000
 570 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xa0000000
 571 #endif
 572 #define CONFIG_SYS_PCIE3_MEM_SIZE       0x10000000      /* 256M */
 573 #define CONFIG_SYS_PCIE3_IO_VIRT        0xf8020000
 574 #define CONFIG_SYS_PCIE3_IO_BUS         0x00000000
 575 #ifdef CONFIG_PHYS_64BIT
 576 #define CONFIG_SYS_PCIE3_IO_PHYS        0xff8020000ull
 577 #else
 578 #define CONFIG_SYS_PCIE3_IO_PHYS        0xf8020000
 579 #endif
 580 #define CONFIG_SYS_PCIE3_IO_SIZE        0x00010000      /* 64k */
 581 #endif
 582
 583 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 584 #endif  /* CONFIG_PCI */
 585
 586 /*
 587  *SATA
 588  */
 589 #define CONFIG_FSL_SATA_V2
 590 #ifdef CONFIG_FSL_SATA_V2
 591 #define CONFIG_SYS_SATA_MAX_DEVICE      1
 592 #define CONFIG_SATA1
 593 #define CONFIG_SYS_SATA1                CONFIG_SYS_MPC85xx_SATA1_ADDR
 594 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
 595 #define CONFIG_LBA48
 596 #endif
 597
 598 /*
 599  * USB
 600  */
 601 #define CONFIG_HAS_FSL_DR_USB
 602
 603 #ifdef CONFIG_HAS_FSL_DR_USB
 604 #define CONFIG_USB_EHCI_FSL
 605 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 606 #endif
 607
 608 /*
 609  * SDHC
 610  */
 611 #ifdef CONFIG_MMC
 612 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 613 #endif
 614
 615 /* Qman/Bman */
 616 #ifndef CONFIG_NOBQFMAN
 617 #define CONFIG_SYS_BMAN_NUM_PORTALS     10
 618 #define CONFIG_SYS_BMAN_MEM_BASE        0xf4000000
 619 #ifdef CONFIG_PHYS_64BIT
 620 #define CONFIG_SYS_BMAN_MEM_PHYS        0xff4000000ull
 621 #else
 622 #define CONFIG_SYS_BMAN_MEM_PHYS        CONFIG_SYS_BMAN_MEM_BASE
 623 #endif
 624 #define CONFIG_SYS_BMAN_MEM_SIZE        0x02000000
 625 #define CONFIG_SYS_BMAN_SP_CENA_SIZE    0x4000
 626 #define CONFIG_SYS_BMAN_SP_CINH_SIZE    0x1000
 627 #define CONFIG_SYS_BMAN_CENA_BASE       CONFIG_SYS_BMAN_MEM_BASE
 628 #define CONFIG_SYS_BMAN_CENA_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 629 #define CONFIG_SYS_BMAN_CINH_BASE       (CONFIG_SYS_BMAN_MEM_BASE + \
 630                                         CONFIG_SYS_BMAN_CENA_SIZE)
 631 #define CONFIG_SYS_BMAN_CINH_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 632 #define CONFIG_SYS_BMAN_SWP_ISDR_REG    0xE08
 633 #define CONFIG_SYS_QMAN_NUM_PORTALS     10
 634 #define CONFIG_SYS_QMAN_MEM_BASE        0xf6000000
 635 #ifdef CONFIG_PHYS_64BIT
 636 #define CONFIG_SYS_QMAN_MEM_PHYS        0xff6000000ull
 637 #else
 638 #define CONFIG_SYS_QMAN_MEM_PHYS        CONFIG_SYS_QMAN_MEM_BASE
 639 #endif
 640 #define CONFIG_SYS_QMAN_MEM_SIZE        0x02000000
 641 #define CONFIG_SYS_QMAN_SP_CENA_SIZE    0x4000
 642 #define CONFIG_SYS_QMAN_SP_CINH_SIZE    0x1000
 643 #define CONFIG_SYS_QMAN_CENA_BASE       CONFIG_SYS_QMAN_MEM_BASE
 644 #define CONFIG_SYS_QMAN_CENA_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 645 #define CONFIG_SYS_QMAN_CINH_BASE       (CONFIG_SYS_QMAN_MEM_BASE + \
 646                                         CONFIG_SYS_QMAN_CENA_SIZE)
 647 #define CONFIG_SYS_QMAN_CINH_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 648 #define CONFIG_SYS_QMAN_SWP_ISDR_REG    0xE08
 649
 650 #define CONFIG_SYS_DPAA_FMAN
 651
 652 #define CONFIG_QE
 653 /* Default address of microcode for the Linux FMan driver */
 654 #if defined(CONFIG_SPIFLASH)
 655 /*
 656  * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
 657  * env, so we got 0x110000.
 658  */
 659 #define CONFIG_SYS_QE_FW_IN_SPIFLASH
 660 #define CONFIG_SYS_FMAN_FW_ADDR 0x110000
 661 #define CONFIG_SYS_QE_FW_ADDR   0x130000
 662 #elif defined(CONFIG_SDCARD)
 663 /*
 664  * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
 665  * about 1MB (2048 blocks), Env is stored after the image, and the env size is
 666  * 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 2080(0x820).
 667  */
 668 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC
 669 #define CONFIG_SYS_FMAN_FW_ADDR         (512 * 0x820)
 670 #define CONFIG_SYS_QE_FW_ADDR           (512 * 0x920)
 671 #elif defined(CONFIG_NAND)
 672 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND
 673 #define CONFIG_SYS_FMAN_FW_ADDR         (11 * CONFIG_SYS_NAND_BLOCK_SIZE)
 674 #define CONFIG_SYS_QE_FW_ADDR           (12 * CONFIG_SYS_NAND_BLOCK_SIZE)
 675 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
 676 /*
 677  * Slave has no ucode locally, it can fetch this from remote. When implementing
 678  * in two corenet boards, slave's ucode could be stored in master's memory
 679  * space, the address can be mapped from slave TLB->slave LAW->
 680  * slave SRIO or PCIE outbound window->master inbound window->
 681  * master LAW->the ucode address in master's memory space.
 682  */
 683 #define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE
 684 #define CONFIG_SYS_FMAN_FW_ADDR 0xFFE00000
 685 #else
 686 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
 687 #define CONFIG_SYS_FMAN_FW_ADDR         0xEFF00000
 688 #define CONFIG_SYS_QE_FW_ADDR           0xEFE00000
 689 #endif
 690 #define CONFIG_SYS_QE_FMAN_FW_LENGTH    0x10000
 691 #define CONFIG_SYS_FDT_PAD              (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 692 #endif /* CONFIG_NOBQFMAN */
 693
 694 #ifdef CONFIG_SYS_DPAA_FMAN
 695 #define CONFIG_FMAN_ENET
 696 #define CONFIG_PHYLIB_10G
 697 #define CONFIG_PHY_VITESSE
 698 #define CONFIG_PHY_REALTEK
 699 #define CONFIG_PHY_TERANETICS
 700 #define RGMII_PHY1_ADDR         0x1
 701 #define RGMII_PHY2_ADDR         0x2
 702 #define SGMII_CARD_AQ_PHY_ADDR_S3 0x3
 703 #define SGMII_CARD_AQ_PHY_ADDR_S4 0x4
 704 #define SGMII_CARD_AQ_PHY_ADDR_S5 0x5
 705 #define SGMII_CARD_PORT1_PHY_ADDR 0x1C
 706 #define SGMII_CARD_PORT2_PHY_ADDR 0x1D
 707 #define SGMII_CARD_PORT3_PHY_ADDR 0x1E
 708 #define SGMII_CARD_PORT4_PHY_ADDR 0x1F
 709 #endif
 710
 711 #ifdef CONFIG_FMAN_ENET
 712 #define CONFIG_ETHPRIME         "FM1@DTSEC4"
 713 #endif
 714
 715 /*
 716  * Dynamic MTD Partition support with mtdparts
 717  */
 718
 719 /*
 720  * Environment
 721  */
 722 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
 723 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 724
 725 /*
 726  * Miscellaneous configurable options
 727  */
 728 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 729
 730 /*
 731  * For booting Linux, the board info and command line data
 732  * have to be in the first 64 MB of memory, since this is
 733  * the maximum mapped by the Linux kernel during initialization.
 734  */
 735 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial map for Linux*/
 736 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 737
 738 #ifdef CONFIG_CMD_KGDB
 739 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 740 #endif
 741
 742 /*
 743  * Environment Configuration
 744  */
 745 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 746 #define CONFIG_BOOTFILE         "uImage"
 747 #define CONFIG_UBOOTPATH        "u-boot.bin" /* U-Boot image on TFTP server */
 748 #define CONFIG_LOADADDR         1000000 /* default location for tftp, bootm */
 749 #define __USB_PHY_TYPE          utmi
 750
 751 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 752         "hwconfig=fsl_ddr:ctlr_intlv=cacheline,bank_intlv=cs0_cs1;\0"  \
 753         "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0" \
 754         "bootargs=root=/dev/ram rw console=ttyS0,115200\0" \
 755         "ramdiskfile=t1024qds/ramdisk.uboot\0"                  \
 756         "fdtfile=t1024qds/t1024qds.dtb\0"                       \
 757         "netdev=eth0\0"                                         \
 758         "video-mode=fslfb:1024x768-32@60,monitor=dvi\0"         \
 759         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"             \
 760         "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"     \
 761         "tftpflash=tftpboot $loadaddr $uboot && "               \
 762         "protect off $ubootaddr +$filesize && "                 \
 763         "erase $ubootaddr +$filesize && "                       \
 764         "cp.b $loadaddr $ubootaddr $filesize && "               \
 765         "protect on $ubootaddr +$filesize && "                  \
 766         "cmp.b $loadaddr $ubootaddr $filesize\0"                \
 767         "consoledev=ttyS0\0"                                    \
 768         "ramdiskaddr=2000000\0"                                 \
 769         "fdtaddr=d00000\0"                                      \
 770         "bdev=sda3\0"
 771
 772 #define CONFIG_LINUX                                    \
 773         "setenv bootargs root=/dev/ram rw "             \
 774         "console=$consoledev,$baudrate $othbootargs;"   \
 775         "setenv ramdiskaddr 0x02000000;"                \
 776         "setenv fdtaddr 0x00c00000;"                    \
 777         "setenv loadaddr 0x1000000;"                    \
 778         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 779
 780 #define CONFIG_NFSBOOTCOMMAND                   \
 781         "setenv bootargs root=/dev/nfs rw "     \
 782         "nfsroot=$serverip:$rootpath "          \
 783         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 784         "console=$consoledev,$baudrate $othbootargs;"   \
 785         "tftp $loadaddr $bootfile;"             \
 786         "tftp $fdtaddr $fdtfile;"               \
 787         "bootm $loadaddr - $fdtaddr"
 788
 789 #define CONFIG_BOOTCOMMAND      CONFIG_LINUX
 790
 791 #include <asm/fsl_secure_boot.h>
 792
 793 #endif  /* __T1024QDS_H */