include/configs/T102xQDS.h

   1 /*
   2  * Copyright 2014 Freescale Semiconductor, Inc.
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 /*
   8  * T1024/T1023 QDS board configuration file
   9  */
  10
  11 #ifndef __T1024QDS_H
  12 #define __T1024QDS_H
  13
  14 /* High Level Configuration Options */
  15 #define CONFIG_SYS_BOOK3E_HV            /* Category E.HV supported */
  16 #define CONFIG_MP                       /* support multiple processors */
  17 #define CONFIG_ENABLE_36BIT_PHYS
  18
  19 #ifdef CONFIG_PHYS_64BIT
  20 #define CONFIG_ADDR_MAP         1
  21 #define CONFIG_SYS_NUM_ADDR_MAP 64      /* number of TLB1 entries */
  22 #endif
  23
  24 #define CONFIG_SYS_FSL_CPC              /* Corenet Platform Cache */
  25 #define CONFIG_SYS_NUM_CPC              CONFIG_SYS_NUM_DDR_CTLRS
  26
  27 #define CONFIG_ENV_OVERWRITE
  28
  29 #define CONFIG_DEEP_SLEEP
  30
  31 #ifdef CONFIG_RAMBOOT_PBL
  32 #define CONFIG_SYS_FSL_PBL_PBI board/freescale/t102xqds/t1024_pbi.cfg
  33 #define CONFIG_SPL_FLUSH_IMAGE
  34 #define CONFIG_SPL_TARGET               "u-boot-with-spl.bin"
  35 #define CONFIG_SYS_TEXT_BASE            0x00201000
  36 #define CONFIG_SPL_TEXT_BASE            0xFFFD8000
  37 #define CONFIG_SPL_PAD_TO               0x40000
  38 #define CONFIG_SPL_MAX_SIZE             0x28000
  39 #define RESET_VECTOR_OFFSET             0x27FFC
  40 #define BOOT_PAGE_OFFSET                0x27000
  41 #ifdef CONFIG_SPL_BUILD
  42 #define CONFIG_SPL_SKIP_RELOCATE
  43 #define CONFIG_SPL_COMMON_INIT_DDR
  44 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
  45 #endif
  46
  47 #ifdef CONFIG_NAND
  48 #define CONFIG_SYS_NAND_U_BOOT_SIZE     (768 << 10)
  49 #define CONFIG_SYS_NAND_U_BOOT_DST      0x00200000
  50 #define CONFIG_SYS_NAND_U_BOOT_START    0x00200000
  51 #define CONFIG_SYS_NAND_U_BOOT_OFFS     (256 << 10)
  52 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
  53 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xqds/t1024_nand_rcw.cfg
  54 #define CONFIG_SPL_NAND_BOOT
  55 #endif
  56
  57 #ifdef CONFIG_SPIFLASH
  58 #define CONFIG_RESET_VECTOR_ADDRESS             0x200FFC
  59 #define CONFIG_SPL_SPI_FLASH_MINIMAL
  60 #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE        (768 << 10)
  61 #define CONFIG_SYS_SPI_FLASH_U_BOOT_DST         (0x00200000)
  62 #define CONFIG_SYS_SPI_FLASH_U_BOOT_START       (0x00200000)
  63 #define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS        (256 << 10)
  64 #define CONFIG_SYS_LDSCRIPT             "arch/powerpc/cpu/mpc85xx/u-boot.lds"
  65 #ifndef CONFIG_SPL_BUILD
  66 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
  67 #endif
  68 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xqds/t1024_spi_rcw.cfg
  69 #define CONFIG_SPL_SPI_BOOT
  70 #endif
  71
  72 #ifdef CONFIG_SDCARD
  73 #define CONFIG_RESET_VECTOR_ADDRESS             0x200FFC
  74 #define CONFIG_SPL_MMC_MINIMAL
  75 #define CONFIG_SYS_MMC_U_BOOT_SIZE      (768 << 10)
  76 #define CONFIG_SYS_MMC_U_BOOT_DST       (0x00200000)
  77 #define CONFIG_SYS_MMC_U_BOOT_START     (0x00200000)
  78 #define CONFIG_SYS_MMC_U_BOOT_OFFS      (260 << 10)
  79 #define CONFIG_SYS_LDSCRIPT             "arch/powerpc/cpu/mpc85xx/u-boot.lds"
  80 #ifndef CONFIG_SPL_BUILD
  81 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
  82 #endif
  83 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xqds/t1024_sd_rcw.cfg
  84 #define CONFIG_SPL_MMC_BOOT
  85 #endif
  86
  87 #endif /* CONFIG_RAMBOOT_PBL */
  88
  89 #ifndef CONFIG_SYS_TEXT_BASE
  90 #define CONFIG_SYS_TEXT_BASE    0xeff40000
  91 #endif
  92
  93 #ifndef CONFIG_RESET_VECTOR_ADDRESS
  94 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
  95 #endif
  96
  97 #ifdef CONFIG_MTD_NOR_FLASH
  98 #define CONFIG_FLASH_CFI_DRIVER
  99 #define CONFIG_SYS_FLASH_CFI
 100 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 101 #endif
 102
 103 /* PCIe Boot - Master */
 104 #define CONFIG_SRIO_PCIE_BOOT_MASTER
 105 /*
 106  * for slave u-boot IMAGE instored in master memory space,
 107  * PHYS must be aligned based on the SIZE
 108  */
 109 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff00000ull
 110 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE     0x100000 /* 1M */
 111 #ifdef CONFIG_PHYS_64BIT
 112 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef200000ull
 113 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff00000ull
 114 #else
 115 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xef200000
 116 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0xfff00000
 117 #endif
 118 /*
 119  * for slave UCODE and ENV instored in master memory space,
 120  * PHYS must be aligned based on the SIZE
 121  */
 122 #ifdef CONFIG_PHYS_64BIT
 123 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef100000ull
 124 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS  0x3ffe00000ull
 125 #else
 126 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xef100000
 127 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS  0xffe00000
 128 #endif
 129 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE     0x40000 /* 256K */
 130 /* slave core release by master*/
 131 #define CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET 0xe00e4
 132 #define CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK 0x00000001 /* release core 0 */
 133
 134 /* PCIe Boot - Slave */
 135 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
 136 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR 0xFFE00000
 137 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS \
 138                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR)
 139 /* Set 1M boot space for PCIe boot */
 140 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_SYS_TEXT_BASE & 0xfff00000)
 141 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS       \
 142                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR)
 143 #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc
 144 #endif
 145
 146 #if defined(CONFIG_SPIFLASH)
 147 #define CONFIG_SYS_EXTRA_ENV_RELOC
 148 #define CONFIG_ENV_SPI_BUS              0
 149 #define CONFIG_ENV_SPI_CS               0
 150 #define CONFIG_ENV_SPI_MAX_HZ           10000000
 151 #define CONFIG_ENV_SPI_MODE             0
 152 #define CONFIG_ENV_SIZE                 0x2000          /* 8KB */
 153 #define CONFIG_ENV_OFFSET               0x100000        /* 1MB */
 154 #define CONFIG_ENV_SECT_SIZE            0x10000
 155 #elif defined(CONFIG_SDCARD)
 156 #define CONFIG_SYS_EXTRA_ENV_RELOC
 157 #define CONFIG_SYS_MMC_ENV_DEV          0
 158 #define CONFIG_ENV_SIZE                 0x2000
 159 #define CONFIG_ENV_OFFSET               (512 * 0x800)
 160 #elif defined(CONFIG_NAND)
 161 #define CONFIG_SYS_EXTRA_ENV_RELOC
 162 #define CONFIG_ENV_SIZE                 0x2000
 163 #define CONFIG_ENV_OFFSET               (10 * CONFIG_SYS_NAND_BLOCK_SIZE)
 164 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
 165 #define CONFIG_ENV_ADDR         0xffe20000
 166 #define CONFIG_ENV_SIZE         0x2000
 167 #elif defined(CONFIG_ENV_IS_NOWHERE)
 168 #define CONFIG_ENV_SIZE         0x2000
 169 #else
 170 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 171 #define CONFIG_ENV_SIZE         0x2000
 172 #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
 173 #endif
 174
 175 #ifndef __ASSEMBLY__
 176 unsigned long get_board_sys_clk(void);
 177 unsigned long get_board_ddr_clk(void);
 178 #endif
 179
 180 #define CONFIG_SYS_CLK_FREQ     get_board_sys_clk()
 181 #define CONFIG_DDR_CLK_FREQ     get_board_ddr_clk()
 182
 183 /*
 184  * These can be toggled for performance analysis, otherwise use default.
 185  */
 186 #define CONFIG_SYS_CACHE_STASHING
 187 #define CONFIG_BACKSIDE_L2_CACHE
 188 #define CONFIG_SYS_INIT_L2CSR0          L2CSR0_L2E
 189 #define CONFIG_BTB                      /* toggle branch predition */
 190 #define CONFIG_DDR_ECC
 191 #ifdef CONFIG_DDR_ECC
 192 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
 193 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
 194 #endif
 195
 196 #define CONFIG_SYS_MEMTEST_START        0x00200000 /* memtest works on */
 197 #define CONFIG_SYS_MEMTEST_END          0x00400000
 198 #define CONFIG_SYS_ALT_MEMTEST
 199 #define CONFIG_PANIC_HANG       /* do not reset board on panic */
 200
 201 /*
 202  *  Config the L3 Cache as L3 SRAM
 203  */
 204 #define CONFIG_SYS_INIT_L3_ADDR         0xFFFC0000
 205 #define CONFIG_SYS_L3_SIZE              (256 << 10)
 206 #define CONFIG_SPL_GD_ADDR              (CONFIG_SYS_INIT_L3_ADDR + 32 * 1024)
 207 #ifdef CONFIG_RAMBOOT_PBL
 208 #define CONFIG_ENV_ADDR                 (CONFIG_SPL_GD_ADDR + 4 * 1024)
 209 #endif
 210 #define CONFIG_SPL_RELOC_MALLOC_ADDR    (CONFIG_SPL_GD_ADDR + 12 * 1024)
 211 #define CONFIG_SPL_RELOC_MALLOC_SIZE    (30 << 10)
 212 #define CONFIG_SPL_RELOC_STACK          (CONFIG_SPL_GD_ADDR + 64 * 1024)
 213 #define CONFIG_SPL_RELOC_STACK_SIZE     (22 << 10)
 214
 215 #ifdef CONFIG_PHYS_64BIT
 216 #define CONFIG_SYS_DCSRBAR              0xf0000000
 217 #define CONFIG_SYS_DCSRBAR_PHYS         0xf00000000ull
 218 #endif
 219
 220 /* EEPROM */
 221 #define CONFIG_ID_EEPROM
 222 #define CONFIG_SYS_I2C_EEPROM_NXID
 223 #define CONFIG_SYS_EEPROM_BUS_NUM       0
 224 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x57
 225 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  1
 226 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
 227 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
 228
 229 /*
 230  * DDR Setup
 231  */
 232 #define CONFIG_VERY_BIG_RAM
 233 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 234 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 235 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 236 #define CONFIG_CHIP_SELECTS_PER_CTRL    (4 * CONFIG_DIMM_SLOTS_PER_CTLR)
 237 #define CONFIG_DDR_SPD
 238
 239 #define CONFIG_SYS_SPD_BUS_NUM  0
 240 #define SPD_EEPROM_ADDRESS      0x51
 241
 242 #define CONFIG_SYS_SDRAM_SIZE   4096    /* for fixed parameter use */
 243
 244 /*
 245  * IFC Definitions
 246  */
 247 #define CONFIG_SYS_FLASH_BASE   0xe0000000
 248 #ifdef CONFIG_PHYS_64BIT
 249 #define CONFIG_SYS_FLASH_BASE_PHYS      (0xf00000000ull | CONFIG_SYS_FLASH_BASE)
 250 #else
 251 #define CONFIG_SYS_FLASH_BASE_PHYS      CONFIG_SYS_FLASH_BASE
 252 #endif
 253
 254 #define CONFIG_SYS_NOR0_CSPR_EXT        (0xf)
 255 #define CONFIG_SYS_NOR0_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \
 256                                 + 0x8000000) | \
 257                                 CSPR_PORT_SIZE_16 | \
 258                                 CSPR_MSEL_NOR | \
 259                                 CSPR_V)
 260 #define CONFIG_SYS_NOR1_CSPR_EXT        (0xf)
 261 #define CONFIG_SYS_NOR1_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
 262                                 CSPR_PORT_SIZE_16 | \
 263                                 CSPR_MSEL_NOR | \
 264                                 CSPR_V)
 265 #define CONFIG_SYS_NOR_AMASK    IFC_AMASK(128*1024*1024)
 266 /* NOR Flash Timing Params */
 267 #define CONFIG_SYS_NOR_CSOR     CSOR_NAND_TRHZ_80
 268 #define CONFIG_SYS_NOR_FTIM0    (FTIM0_NOR_TACSE(0x4) | \
 269                                 FTIM0_NOR_TEADC(0x5) | \
 270                                 FTIM0_NOR_TEAHC(0x5))
 271 #define CONFIG_SYS_NOR_FTIM1    (FTIM1_NOR_TACO(0x35) | \
 272                                 FTIM1_NOR_TRAD_NOR(0x1A) |\
 273                                 FTIM1_NOR_TSEQRAD_NOR(0x13))
 274 #define CONFIG_SYS_NOR_FTIM2    (FTIM2_NOR_TCS(0x4) | \
 275                                 FTIM2_NOR_TCH(0x4) | \
 276                                 FTIM2_NOR_TWPH(0x0E) | \
 277                                 FTIM2_NOR_TWP(0x1c))
 278 #define CONFIG_SYS_NOR_FTIM3    0x0
 279
 280 #define CONFIG_SYS_FLASH_QUIET_TEST
 281 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
 282
 283 #define CONFIG_SYS_MAX_FLASH_BANKS      2       /* number of banks */
 284 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device */
 285 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 286 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 287
 288 #define CONFIG_SYS_FLASH_EMPTY_INFO
 289 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS \
 290                                         + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS}
 291 #define CONFIG_FSL_QIXIS        /* use common QIXIS code */
 292 #define QIXIS_BASE              0xffdf0000
 293 #ifdef CONFIG_PHYS_64BIT
 294 #define QIXIS_BASE_PHYS         (0xf00000000ull | QIXIS_BASE)
 295 #else
 296 #define QIXIS_BASE_PHYS         QIXIS_BASE
 297 #endif
 298 #define QIXIS_LBMAP_SWITCH              0x06
 299 #define QIXIS_LBMAP_MASK                0x0f
 300 #define QIXIS_LBMAP_SHIFT               0
 301 #define QIXIS_LBMAP_DFLTBANK            0x00
 302 #define QIXIS_LBMAP_ALTBANK             0x04
 303 #define QIXIS_RST_CTL_RESET             0x31
 304 #define QIXIS_RCFG_CTL_RECONFIG_IDLE    0x20
 305 #define QIXIS_RCFG_CTL_RECONFIG_START   0x21
 306 #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE   0x08
 307 #define QIXIS_RST_FORCE_MEM             0x01
 308
 309 #define CONFIG_SYS_CSPR3_EXT    (0xf)
 310 #define CONFIG_SYS_CSPR3        (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) \
 311                                 | CSPR_PORT_SIZE_8 \
 312                                 | CSPR_MSEL_GPCM \
 313                                 | CSPR_V)
 314 #define CONFIG_SYS_AMASK3       IFC_AMASK(4*1024)
 315 #define CONFIG_SYS_CSOR3        0x0
 316 /* QIXIS Timing parameters for IFC CS3 */
 317 #define CONFIG_SYS_CS3_FTIM0            (FTIM0_GPCM_TACSE(0x0e) | \
 318                                         FTIM0_GPCM_TEADC(0x0e) | \
 319                                         FTIM0_GPCM_TEAHC(0x0e))
 320 #define CONFIG_SYS_CS3_FTIM1            (FTIM1_GPCM_TACO(0xff) | \
 321                                         FTIM1_GPCM_TRAD(0x3f))
 322 #define CONFIG_SYS_CS3_FTIM2            (FTIM2_GPCM_TCS(0x0e) | \
 323                                         FTIM2_GPCM_TCH(0x8) | \
 324                                         FTIM2_GPCM_TWP(0x1f))
 325 #define CONFIG_SYS_CS3_FTIM3            0x0
 326
 327 #define CONFIG_NAND_FSL_IFC
 328 #define CONFIG_SYS_NAND_BASE            0xff800000
 329 #ifdef CONFIG_PHYS_64BIT
 330 #define CONFIG_SYS_NAND_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_NAND_BASE)
 331 #else
 332 #define CONFIG_SYS_NAND_BASE_PHYS       CONFIG_SYS_NAND_BASE
 333 #endif
 334 #define CONFIG_SYS_NAND_CSPR_EXT        (0xf)
 335 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 336                                 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
 337                                 | CSPR_MSEL_NAND        /* MSEL = NAND */ \
 338                                 | CSPR_V)
 339 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64*1024)
 340
 341 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 342                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 343                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
 344                                 | CSOR_NAND_RAL_3       /* RAL = 3Byes */ \
 345                                 | CSOR_NAND_PGS_2K      /* Page Size = 2K */ \
 346                                 | CSOR_NAND_SPRZ_64/* Spare size = 64 */ \
 347                                 | CSOR_NAND_PB(64))     /*Pages Per Block = 64*/
 348
 349 #define CONFIG_SYS_NAND_ONFI_DETECTION
 350
 351 /* ONFI NAND Flash mode0 Timing Params */
 352 #define CONFIG_SYS_NAND_FTIM0           (FTIM0_NAND_TCCST(0x07) | \
 353                                         FTIM0_NAND_TWP(0x18)   | \
 354                                         FTIM0_NAND_TWCHT(0x07) | \
 355                                         FTIM0_NAND_TWH(0x0a))
 356 #define CONFIG_SYS_NAND_FTIM1           (FTIM1_NAND_TADLE(0x32) | \
 357                                         FTIM1_NAND_TWBE(0x39)  | \
 358                                         FTIM1_NAND_TRR(0x0e)   | \
 359                                         FTIM1_NAND_TRP(0x18))
 360 #define CONFIG_SYS_NAND_FTIM2           (FTIM2_NAND_TRAD(0x0f) | \
 361                                         FTIM2_NAND_TREH(0x0a) | \
 362                                         FTIM2_NAND_TWHRE(0x1e))
 363 #define CONFIG_SYS_NAND_FTIM3           0x0
 364
 365 #define CONFIG_SYS_NAND_DDR_LAW         11
 366 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
 367 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 368 #define CONFIG_CMD_NAND
 369
 370 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128 * 1024)
 371
 372 #if defined(CONFIG_NAND)
 373 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NAND_CSPR_EXT
 374 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
 375 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
 376 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
 377 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
 378 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
 379 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
 380 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
 381 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 382 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR0_CSPR
 383 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
 384 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 385 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 386 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 387 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 388 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 389 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NOR1_CSPR_EXT
 390 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NOR1_CSPR
 391 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NOR_AMASK
 392 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NOR_CSOR
 393 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NOR_FTIM0
 394 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NOR_FTIM1
 395 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NOR_FTIM2
 396 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NOR_FTIM3
 397 #else
 398 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 399 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR0_CSPR
 400 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 401 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 402 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 403 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 404 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 405 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 406 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR1_CSPR_EXT
 407 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR1_CSPR
 408 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
 409 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 410 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 411 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 412 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 413 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 414 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NAND_CSPR_EXT
 415 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NAND_CSPR
 416 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NAND_AMASK
 417 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NAND_CSOR
 418 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NAND_FTIM0
 419 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NAND_FTIM1
 420 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NAND_FTIM2
 421 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NAND_FTIM3
 422 #endif
 423
 424 #ifdef CONFIG_SPL_BUILD
 425 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SPL_TEXT_BASE
 426 #else
 427 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_TEXT_BASE
 428 #endif
 429
 430 #if defined(CONFIG_RAMBOOT_PBL)
 431 #define CONFIG_SYS_RAMBOOT
 432 #endif
 433
 434 #define CONFIG_BOARD_EARLY_INIT_R
 435 #define CONFIG_MISC_INIT_R
 436
 437 #define CONFIG_HWCONFIG
 438
 439 /* define to use L1 as initial stack */
 440 #define CONFIG_L1_INIT_RAM
 441 #define CONFIG_SYS_INIT_RAM_LOCK
 442 #define CONFIG_SYS_INIT_RAM_ADDR        0xfdd00000      /* Initial L1 address */
 443 #ifdef CONFIG_PHYS_64BIT
 444 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH      0xf
 445 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW       0xfe03c000
 446 /* The assembler doesn't like typecast */
 447 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
 448         ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
 449           CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
 450 #else
 451 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS   0xfe03c000 /* Initial L1 address */
 452 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0
 453 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS
 454 #endif
 455 #define CONFIG_SYS_INIT_RAM_SIZE                0x00004000
 456
 457 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - \
 458                                         GENERATED_GBL_DATA_SIZE)
 459 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 460
 461 #define CONFIG_SYS_MONITOR_LEN          (768 * 1024)
 462 #define CONFIG_SYS_MALLOC_LEN           (10 * 1024 * 1024)
 463
 464 /* Serial Port */
 465 #define CONFIG_CONS_INDEX       1
 466 #define CONFIG_SYS_NS16550_SERIAL
 467 #define CONFIG_SYS_NS16550_REG_SIZE     1
 468 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
 469
 470 #define CONFIG_SYS_BAUDRATE_TABLE       \
 471         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 472
 473 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
 474 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
 475 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
 476 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
 477
 478 /* Video */
 479 #ifdef CONFIG_ARCH_T1024                /* no DIU on T1023 */
 480 #define CONFIG_FSL_DIU_FB
 481 #ifdef CONFIG_FSL_DIU_FB
 482 #define CONFIG_FSL_DIU_CH7301
 483 #define CONFIG_SYS_DIU_ADDR     (CONFIG_SYS_CCSRBAR + 0x180000)
 484 #define CONFIG_VIDEO_LOGO
 485 #define CONFIG_VIDEO_BMP_LOGO
 486 #define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS
 487 /*
 488  * With CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS, flash I/O is really slow, so
 489  * disable empty flash sector detection, which is I/O-intensive.
 490  */
 491 #undef CONFIG_SYS_FLASH_EMPTY_INFO
 492 #endif
 493 #endif
 494
 495 /* I2C */
 496 #define CONFIG_SYS_I2C
 497 #define CONFIG_SYS_I2C_FSL              /* Use FSL common I2C driver */
 498 #define CONFIG_SYS_FSL_I2C_SPEED        50000   /* I2C speed in Hz */
 499 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 500 #define CONFIG_SYS_FSL_I2C2_SPEED       50000   /* I2C speed in Hz */
 501 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
 502 #define CONFIG_SYS_FSL_I2C_OFFSET       0x118000
 503 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x118100
 504
 505 #define I2C_MUX_PCA_ADDR                0x77
 506 #define I2C_MUX_PCA_ADDR_PRI            0x77 /* Primary Mux*/
 507 #define I2C_MUX_PCA_ADDR_SEC            0x76 /* Secondary multiplexer */
 508 #define I2C_RETIMER_ADDR                0x18
 509
 510 /* I2C bus multiplexer */
 511 #define I2C_MUX_CH_DEFAULT      0x8
 512 #define I2C_MUX_CH_DIU          0xC
 513 #define I2C_MUX_CH5             0xD
 514 #define I2C_MUX_CH7             0xF
 515
 516 /* LDI/DVI Encoder for display */
 517 #define CONFIG_SYS_I2C_LDI_ADDR  0x38
 518 #define CONFIG_SYS_I2C_DVI_ADDR  0x75
 519
 520 /*
 521  * RTC configuration
 522  */
 523 #define RTC
 524 #define CONFIG_RTC_DS3231       1
 525 #define CONFIG_SYS_I2C_RTC_ADDR 0x68
 526
 527 /*
 528  * eSPI - Enhanced SPI
 529  */
 530 #ifndef CONFIG_SPL_BUILD
 531 #endif
 532 #define CONFIG_SPI_FLASH_BAR
 533 #define CONFIG_SF_DEFAULT_SPEED  10000000
 534 #define CONFIG_SF_DEFAULT_MODE    0
 535
 536 /*
 537  * General PCIe
 538  * Memory space is mapped 1-1, but I/O space must start from 0.
 539  */
 540 #define CONFIG_PCIE1            /* PCIE controller 1 */
 541 #define CONFIG_PCIE2            /* PCIE controller 2 */
 542 #define CONFIG_PCIE3            /* PCIE controller 3 */
 543 #define CONFIG_FSL_PCI_INIT     /* Use common FSL init code */
 544 #define CONFIG_SYS_PCI_64BIT    /* enable 64-bit PCI resources */
 545 #define CONFIG_PCI_INDIRECT_BRIDGE
 546
 547 #ifdef CONFIG_PCI
 548 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
 549 #ifdef CONFIG_PCIE1
 550 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
 551 #ifdef CONFIG_PHYS_64BIT
 552 #define CONFIG_SYS_PCIE1_MEM_BUS        0xe0000000
 553 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
 554 #else
 555 #define CONFIG_SYS_PCIE1_MEM_BUS        0x80000000
 556 #define CONFIG_SYS_PCIE1_MEM_PHYS       0x80000000
 557 #endif
 558 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x10000000      /* 256M */
 559 #define CONFIG_SYS_PCIE1_IO_VIRT        0xf8000000
 560 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 561 #ifdef CONFIG_PHYS_64BIT
 562 #define CONFIG_SYS_PCIE1_IO_PHYS        0xff8000000ull
 563 #else
 564 #define CONFIG_SYS_PCIE1_IO_PHYS        0xf8000000
 565 #endif
 566 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 567 #endif
 568
 569 /* controller 2, Slot 2, tgtid 2, Base address 201000 */
 570 #ifdef CONFIG_PCIE2
 571 #define CONFIG_SYS_PCIE2_MEM_VIRT       0x90000000
 572 #ifdef CONFIG_PHYS_64BIT
 573 #define CONFIG_SYS_PCIE2_MEM_BUS        0xe0000000
 574 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc10000000ull
 575 #else
 576 #define CONFIG_SYS_PCIE2_MEM_BUS        0x90000000
 577 #define CONFIG_SYS_PCIE2_MEM_PHYS       0x90000000
 578 #endif
 579 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x10000000      /* 256M */
 580 #define CONFIG_SYS_PCIE2_IO_VIRT        0xf8010000
 581 #define CONFIG_SYS_PCIE2_IO_BUS         0x00000000
 582 #ifdef CONFIG_PHYS_64BIT
 583 #define CONFIG_SYS_PCIE2_IO_PHYS        0xff8010000ull
 584 #else
 585 #define CONFIG_SYS_PCIE2_IO_PHYS        0xf8010000
 586 #endif
 587 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00010000      /* 64k */
 588 #endif
 589
 590 /* controller 3, Slot 1, tgtid 1, Base address 202000 */
 591 #ifdef CONFIG_PCIE3
 592 #define CONFIG_SYS_PCIE3_MEM_VIRT       0xa0000000
 593 #ifdef CONFIG_PHYS_64BIT
 594 #define CONFIG_SYS_PCIE3_MEM_BUS        0xe0000000
 595 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc20000000ull
 596 #else
 597 #define CONFIG_SYS_PCIE3_MEM_BUS        0xa0000000
 598 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xa0000000
 599 #endif
 600 #define CONFIG_SYS_PCIE3_MEM_SIZE       0x10000000      /* 256M */
 601 #define CONFIG_SYS_PCIE3_IO_VIRT        0xf8020000
 602 #define CONFIG_SYS_PCIE3_IO_BUS         0x00000000
 603 #ifdef CONFIG_PHYS_64BIT
 604 #define CONFIG_SYS_PCIE3_IO_PHYS        0xff8020000ull
 605 #else
 606 #define CONFIG_SYS_PCIE3_IO_PHYS        0xf8020000
 607 #endif
 608 #define CONFIG_SYS_PCIE3_IO_SIZE        0x00010000      /* 64k */
 609 #endif
 610
 611 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 612 #endif  /* CONFIG_PCI */
 613
 614 /*
 615  *SATA
 616  */
 617 #define CONFIG_FSL_SATA_V2
 618 #ifdef CONFIG_FSL_SATA_V2
 619 #define CONFIG_LIBATA
 620 #define CONFIG_FSL_SATA
 621 #define CONFIG_SYS_SATA_MAX_DEVICE      1
 622 #define CONFIG_SATA1
 623 #define CONFIG_SYS_SATA1                CONFIG_SYS_MPC85xx_SATA1_ADDR
 624 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
 625 #define CONFIG_LBA48
 626 #endif
 627
 628 /*
 629  * USB
 630  */
 631 #define CONFIG_HAS_FSL_DR_USB
 632
 633 #ifdef CONFIG_HAS_FSL_DR_USB
 634 #define CONFIG_USB_EHCI_FSL
 635 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 636 #endif
 637
 638 /*
 639  * SDHC
 640  */
 641 #ifdef CONFIG_MMC
 642 #define CONFIG_FSL_ESDHC
 643 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 644 #endif
 645
 646 /* Qman/Bman */
 647 #ifndef CONFIG_NOBQFMAN
 648 #define CONFIG_SYS_DPAA_QBMAN           /* Support Q/Bman */
 649 #define CONFIG_SYS_BMAN_NUM_PORTALS     10
 650 #define CONFIG_SYS_BMAN_MEM_BASE        0xf4000000
 651 #ifdef CONFIG_PHYS_64BIT
 652 #define CONFIG_SYS_BMAN_MEM_PHYS        0xff4000000ull
 653 #else
 654 #define CONFIG_SYS_BMAN_MEM_PHYS        CONFIG_SYS_BMAN_MEM_BASE
 655 #endif
 656 #define CONFIG_SYS_BMAN_MEM_SIZE        0x02000000
 657 #define CONFIG_SYS_BMAN_SP_CENA_SIZE    0x4000
 658 #define CONFIG_SYS_BMAN_SP_CINH_SIZE    0x1000
 659 #define CONFIG_SYS_BMAN_CENA_BASE       CONFIG_SYS_BMAN_MEM_BASE
 660 #define CONFIG_SYS_BMAN_CENA_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 661 #define CONFIG_SYS_BMAN_CINH_BASE       (CONFIG_SYS_BMAN_MEM_BASE + \
 662                                         CONFIG_SYS_BMAN_CENA_SIZE)
 663 #define CONFIG_SYS_BMAN_CINH_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 664 #define CONFIG_SYS_BMAN_SWP_ISDR_REG    0xE08
 665 #define CONFIG_SYS_QMAN_NUM_PORTALS     10
 666 #define CONFIG_SYS_QMAN_MEM_BASE        0xf6000000
 667 #ifdef CONFIG_PHYS_64BIT
 668 #define CONFIG_SYS_QMAN_MEM_PHYS        0xff6000000ull
 669 #else
 670 #define CONFIG_SYS_QMAN_MEM_PHYS        CONFIG_SYS_QMAN_MEM_BASE
 671 #endif
 672 #define CONFIG_SYS_QMAN_MEM_SIZE        0x02000000
 673 #define CONFIG_SYS_QMAN_SP_CENA_SIZE    0x4000
 674 #define CONFIG_SYS_QMAN_SP_CINH_SIZE    0x1000
 675 #define CONFIG_SYS_QMAN_CENA_BASE       CONFIG_SYS_QMAN_MEM_BASE
 676 #define CONFIG_SYS_QMAN_CENA_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 677 #define CONFIG_SYS_QMAN_CINH_BASE       (CONFIG_SYS_QMAN_MEM_BASE + \
 678                                         CONFIG_SYS_QMAN_CENA_SIZE)
 679 #define CONFIG_SYS_QMAN_CINH_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 680 #define CONFIG_SYS_QMAN_SWP_ISDR_REG    0xE08
 681
 682 #define CONFIG_SYS_DPAA_FMAN
 683
 684 #define CONFIG_QE
 685 #define CONFIG_U_QE
 686 /* Default address of microcode for the Linux FMan driver */
 687 #if defined(CONFIG_SPIFLASH)
 688 /*
 689  * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
 690  * env, so we got 0x110000.
 691  */
 692 #define CONFIG_SYS_QE_FW_IN_SPIFLASH
 693 #define CONFIG_SYS_FMAN_FW_ADDR 0x110000
 694 #define CONFIG_SYS_QE_FW_ADDR   0x130000
 695 #elif defined(CONFIG_SDCARD)
 696 /*
 697  * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
 698  * about 1MB (2048 blocks), Env is stored after the image, and the env size is
 699  * 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 2080(0x820).
 700  */
 701 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC
 702 #define CONFIG_SYS_FMAN_FW_ADDR         (512 * 0x820)
 703 #define CONFIG_SYS_QE_FW_ADDR           (512 * 0x920)
 704 #elif defined(CONFIG_NAND)
 705 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND
 706 #define CONFIG_SYS_FMAN_FW_ADDR         (11 * CONFIG_SYS_NAND_BLOCK_SIZE)
 707 #define CONFIG_SYS_QE_FW_ADDR           (12 * CONFIG_SYS_NAND_BLOCK_SIZE)
 708 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
 709 /*
 710  * Slave has no ucode locally, it can fetch this from remote. When implementing
 711  * in two corenet boards, slave's ucode could be stored in master's memory
 712  * space, the address can be mapped from slave TLB->slave LAW->
 713  * slave SRIO or PCIE outbound window->master inbound window->
 714  * master LAW->the ucode address in master's memory space.
 715  */
 716 #define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE
 717 #define CONFIG_SYS_FMAN_FW_ADDR 0xFFE00000
 718 #else
 719 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
 720 #define CONFIG_SYS_FMAN_FW_ADDR         0xEFF00000
 721 #define CONFIG_SYS_QE_FW_ADDR           0xEFE00000
 722 #endif
 723 #define CONFIG_SYS_QE_FMAN_FW_LENGTH    0x10000
 724 #define CONFIG_SYS_FDT_PAD              (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 725 #endif /* CONFIG_NOBQFMAN */
 726
 727 #ifdef CONFIG_SYS_DPAA_FMAN
 728 #define CONFIG_FMAN_ENET
 729 #define CONFIG_PHYLIB_10G
 730 #define CONFIG_PHY_VITESSE
 731 #define CONFIG_PHY_REALTEK
 732 #define CONFIG_PHY_TERANETICS
 733 #define RGMII_PHY1_ADDR         0x1
 734 #define RGMII_PHY2_ADDR         0x2
 735 #define SGMII_CARD_AQ_PHY_ADDR_S3 0x3
 736 #define SGMII_CARD_AQ_PHY_ADDR_S4 0x4
 737 #define SGMII_CARD_AQ_PHY_ADDR_S5 0x5
 738 #define SGMII_CARD_PORT1_PHY_ADDR 0x1C
 739 #define SGMII_CARD_PORT2_PHY_ADDR 0x1D
 740 #define SGMII_CARD_PORT3_PHY_ADDR 0x1E
 741 #define SGMII_CARD_PORT4_PHY_ADDR 0x1F
 742 #endif
 743
 744 #ifdef CONFIG_FMAN_ENET
 745 #define CONFIG_MII              /* MII PHY management */
 746 #define CONFIG_ETHPRIME         "FM1@DTSEC4"
 747 #define CONFIG_PHY_GIGE         /* Include GbE speed/duplex detection */
 748 #endif
 749
 750 /*
 751  * Dynamic MTD Partition support with mtdparts
 752  */
 753 #ifdef CONFIG_MTD_NOR_FLASH
 754 #define CONFIG_MTD_DEVICE
 755 #define CONFIG_MTD_PARTITIONS
 756 #define CONFIG_FLASH_CFI_MTD
 757 #define MTDIDS_DEFAULT    "nor0=fe8000000.nor,nand0=fff800000.flash," \
 758                           "spi0=spife110000.0"
 759 #define MTDPARTS_DEFAULT  "mtdparts=fe8000000.nor:1m(uboot),5m(kernel)," \
 760                           "128k(dtb),96m(fs),-(user);"\
 761                           "fff800000.flash:2m(uboot),9m(kernel),"\
 762                           "128k(dtb),96m(fs),-(user);spife110000.0:" \
 763                           "2m(uboot),9m(kernel),128k(dtb),-(user)"
 764 #endif
 765
 766 /*
 767  * Environment
 768  */
 769 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
 770 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 771
 772 /*
 773  * Command line configuration.
 774  */
 775 #define CONFIG_CMD_REGINFO
 776
 777 #ifdef CONFIG_PCI
 778 #define CONFIG_CMD_PCI
 779 #endif
 780
 781 /*
 782  * Miscellaneous configurable options
 783  */
 784 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 785 #define CONFIG_CMDLINE_EDITING                  /* Command-line editing */
 786 #define CONFIG_AUTO_COMPLETE                    /* add autocompletion support */
 787 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 788 #ifdef CONFIG_CMD_KGDB
 789 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size */
 790 #else
 791 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size */
 792 #endif
 793 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 794 #define CONFIG_SYS_MAXARGS      16              /* max number of command args */
 795 #define CONFIG_SYS_BARGSIZE  CONFIG_SYS_CBSIZE  /* Boot Argument Buffer Size */
 796
 797 /*
 798  * For booting Linux, the board info and command line data
 799  * have to be in the first 64 MB of memory, since this is
 800  * the maximum mapped by the Linux kernel during initialization.
 801  */
 802 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial map for Linux*/
 803 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 804
 805 #ifdef CONFIG_CMD_KGDB
 806 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 807 #endif
 808
 809 /*
 810  * Environment Configuration
 811  */
 812 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 813 #define CONFIG_BOOTFILE         "uImage"
 814 #define CONFIG_UBOOTPATH        "u-boot.bin" /* U-Boot image on TFTP server */
 815 #define CONFIG_LOADADDR         1000000 /* default location for tftp, bootm */
 816 #define __USB_PHY_TYPE          utmi
 817
 818 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 819         "hwconfig=fsl_ddr:ctlr_intlv=cacheline,bank_intlv=cs0_cs1;\0"  \
 820         "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0" \
 821         "bootargs=root=/dev/ram rw console=ttyS0,115200\0" \
 822         "ramdiskfile=t1024qds/ramdisk.uboot\0"                  \
 823         "fdtfile=t1024qds/t1024qds.dtb\0"                       \
 824         "netdev=eth0\0"                                         \
 825         "video-mode=fslfb:1024x768-32@60,monitor=dvi\0"         \
 826         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"             \
 827         "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"     \
 828         "tftpflash=tftpboot $loadaddr $uboot && "               \
 829         "protect off $ubootaddr +$filesize && "                 \
 830         "erase $ubootaddr +$filesize && "                       \
 831         "cp.b $loadaddr $ubootaddr $filesize && "               \
 832         "protect on $ubootaddr +$filesize && "                  \
 833         "cmp.b $loadaddr $ubootaddr $filesize\0"                \
 834         "consoledev=ttyS0\0"                                    \
 835         "ramdiskaddr=2000000\0"                                 \
 836         "fdtaddr=d00000\0"                                      \
 837         "bdev=sda3\0"
 838
 839 #define CONFIG_LINUX                                    \
 840         "setenv bootargs root=/dev/ram rw "             \
 841         "console=$consoledev,$baudrate $othbootargs;"   \
 842         "setenv ramdiskaddr 0x02000000;"                \
 843         "setenv fdtaddr 0x00c00000;"                    \
 844         "setenv loadaddr 0x1000000;"                    \
 845         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 846
 847 #define CONFIG_NFSBOOTCOMMAND                   \
 848         "setenv bootargs root=/dev/nfs rw "     \
 849         "nfsroot=$serverip:$rootpath "          \
 850         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 851         "console=$consoledev,$baudrate $othbootargs;"   \
 852         "tftp $loadaddr $bootfile;"             \
 853         "tftp $fdtaddr $fdtfile;"               \
 854         "bootm $loadaddr - $fdtaddr"
 855
 856 #define CONFIG_BOOTCOMMAND      CONFIG_LINUX
 857
 858 #include <asm/fsl_secure_boot.h>
 859
 860 #endif  /* __T1024QDS_H */