1 /* SPDX-License-Identifier: GPL-2.0+ */
3 * (C) Copyright 2016 Allied Telesis <www.alliedtelesis.co.nz>
6 #ifndef _CONFIG_SBX81LIFXCAT_H
7 #define _CONFIG_SBX81LIFXCAT_H
10 * High Level Configuration Options (easy to change)
12 #define CONFIG_FEROCEON_88FR131 1 /* CPU Core subversion */
13 #define CONFIG_KW88F6281 1 /* SOC Name */
14 #define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage.cfg
16 /* additions for new ARM relocation support */
17 #define CONFIG_SYS_SDRAM_BASE 0x00000000
19 #define CONFIG_KIRKWOOD_EGIGA_INIT /* Enable GbePort0/1 for kernel */
20 #define CONFIG_KIRKWOOD_PCIE_INIT /* Enable PCIE Port0 */
21 #define CONFIG_KIRKWOOD_RGMII_PAD_1V8 /* Set RGMII Pad voltage to 1.8V */
22 #define CONFIG_KIRKWOOD_GPIO 1
25 * NS16550 Configuration
27 #define CONFIG_SYS_NS16550
28 #define CONFIG_SYS_NS16550_SERIAL
29 #define CONFIG_SYS_NS16550_REG_SIZE (-4)
30 #define CONFIG_SYS_NS16550_CLK CONFIG_SYS_TCLK
31 #define CONFIG_SYS_NS16550_COM1 KW_UART0_BASE
34 * Serial Port configuration
35 * The following definitions let you select what serial you want to use
36 * for your console driver.
39 #define MTDPARTS_DEFAULT "mtdparts=spi0.0:768K(boot)ro,256K(boot-env),14M(user),1M(errlog)"
40 #define MTDPARTS_MTDOOPS "errlog"
43 * Environment variables configurations
47 * U-Boot bootcode configuration
50 #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for monitor */
53 * For booting Linux, the board info and command line data
54 * have to be in the first 8 MB of memory, since this is
55 * the maximum mapped by the Linux kernel during initialization.
57 #define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Mem map for Linux*/
59 /* size in bytes reserved for initial data */
61 #include <asm/arch/config.h>
62 /* There is no PHY directly connected so don't ask it for link status */
63 #undef CONFIG_SYS_FAULT_ECHO_LINK_DOWN
66 * Ethernet Driver configuration
69 #define CONFIG_MVGBE /* Enable kirkwood Gbe Controller Driver */
70 #define CONFIG_MVGBE_PORTS {1, 0} /* enable a single port */
71 #define CONFIG_PHY_BASE_ADR 0x01
72 #endif /* CONFIG_CMD_NET */
74 #endif /* _CONFIG_SBX81LIFXCAT_H */