1 /* SPDX-License-Identifier: GPL-2.0+ */
3 * (C) Copyright 2016 Allied Telesis <www.alliedtelesis.co.nz>
6 #ifndef _CONFIG_SBX81LIFXCAT_H
7 #define _CONFIG_SBX81LIFXCAT_H
9 /* additions for new ARM relocation support */
10 #define CONFIG_SYS_SDRAM_BASE 0x00000000
13 * NS16550 Configuration
15 #define CONFIG_SYS_NS16550_SERIAL
16 #define CONFIG_SYS_NS16550_REG_SIZE (-4)
17 #define CONFIG_SYS_NS16550_CLK CONFIG_SYS_TCLK
18 #define CONFIG_SYS_NS16550_COM1 KW_UART0_BASE
21 * Serial Port configuration
22 * The following definitions let you select what serial you want to use
23 * for your console driver.
26 #define MTDPARTS_DEFAULT "mtdparts=spi0.0:768K(boot)ro,256K(boot-env),14M(user),1M(errlog)"
27 #define MTDPARTS_MTDOOPS "errlog"
30 * Environment variables configurations
34 * U-Boot bootcode configuration
37 #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for monitor */
40 * For booting Linux, the board info and command line data
41 * have to be in the first 8 MB of memory, since this is
42 * the maximum mapped by the Linux kernel during initialization.
44 #define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Mem map for Linux*/
46 /* size in bytes reserved for initial data */
48 #include <asm/arch/config.h>
49 /* There is no PHY directly connected so don't ask it for link status */
52 * Ethernet Driver configuration
55 #define CONFIG_MVGBE_PORTS {1, 0} /* enable a single port */
56 #define CONFIG_PHY_BASE_ADR 0x01
57 #endif /* CONFIG_CMD_NET */
59 #endif /* _CONFIG_SBX81LIFXCAT_H */