1 /* SPDX-License-Identifier: GPL-2.0+ */
3 * (C) Copyright 2016 Allied Telesis <www.alliedtelesis.co.nz>
6 #ifndef _CONFIG_SBX81LIFKW_H
7 #define _CONFIG_SBX81LIFKW_H
10 * High Level Configuration Options (easy to change)
12 #define CONFIG_FEROCEON_88FR131 1 /* CPU Core subversion */
13 #define CONFIG_KW88F6281 1 /* SOC Name */
14 #define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage.cfg
16 /* additions for new ARM relocation support */
17 #define CONFIG_SYS_SDRAM_BASE 0x00000000
19 #define CONFIG_KIRKWOOD_EGIGA_INIT /* Enable GbePort0/1 for kernel */
20 #define CONFIG_KIRKWOOD_PCIE_INIT /* Enable PCIE Port0 */
21 #define CONFIG_KIRKWOOD_RGMII_PAD_1V8 /* Set RGMII Pad voltage to 1.8V */
22 #define CONFIG_KIRKWOOD_GPIO 1
25 * NS16550 Configuration
27 #define CONFIG_SYS_NS16550_SERIAL
28 #define CONFIG_SYS_NS16550_REG_SIZE (-4)
29 #define CONFIG_SYS_NS16550_CLK CONFIG_SYS_TCLK
30 #define CONFIG_SYS_NS16550_COM1 KW_UART0_BASE
33 * Serial Port configuration
34 * The following definitions let you select what serial you want to use
35 * for your console driver.
38 #define MTDPARTS_DEFAULT "mtdparts=spi0.0:768K(boot)ro,256K(boot-env),14M(user),1M(errlog)"
39 #define MTDPARTS_MTDOOPS "errlog"
42 * Environment variables configurations
46 * U-Boot bootcode configuration
49 #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for monitor */
51 #define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Mem map for Linux*/
53 /* size in bytes reserved for initial data */
55 #include <asm/arch/config.h>
56 /* There is no PHY directly connected so don't ask it for link status */
57 #undef CONFIG_SYS_FAULT_ECHO_LINK_DOWN
60 * Ethernet Driver configuration
63 #define CONFIG_MVGBE_PORTS {1, 0} /* enable a single port */
64 #define CONFIG_PHY_BASE_ADR 0x01
65 #endif /* CONFIG_CMD_NET */
67 #endif /* _CONFIG_SBX81LIFKW_H */