mpc85xx: configs - Enable blob command in freescale platforms
[platform/kernel/u-boot.git] / include / configs / P2041RDB.h
1 /*
2  * Copyright 2011-2012 Freescale Semiconductor, Inc.
3  *
4  * SPDX-License-Identifier:     GPL-2.0+
5  */
6
7 /*
8  * P2041 RDB board configuration file
9  * Also supports P2040 RDB
10  */
11 #ifndef __CONFIG_H
12 #define __CONFIG_H
13
14 #define CONFIG_P2041RDB
15 #define CONFIG_PHYS_64BIT
16 #define CONFIG_PPC_P2041
17
18 #ifdef CONFIG_RAMBOOT_PBL
19 #define CONFIG_RAMBOOT_TEXT_BASE        CONFIG_SYS_TEXT_BASE
20 #define CONFIG_RESET_VECTOR_ADDRESS     0xfffffffc
21 #define CONFIG_SYS_FSL_PBL_PBI board/freescale/corenet_ds/pbi.cfg
22 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/corenet_ds/rcw_p2041rdb.cfg
23 #endif
24
25 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
26 /* Set 1M boot space */
27 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_SYS_TEXT_BASE & 0xfff00000)
28 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS \
29                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR)
30 #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc
31 #define CONFIG_SYS_NO_FLASH
32 #endif
33
34 /* High Level Configuration Options */
35 #define CONFIG_BOOKE
36 #define CONFIG_E500                     /* BOOKE e500 family */
37 #define CONFIG_E500MC                   /* BOOKE e500mc family */
38 #define CONFIG_SYS_BOOK3E_HV            /* Category E.HV supported */
39 #define CONFIG_MP                       /* support multiple processors */
40
41 #ifndef CONFIG_SYS_TEXT_BASE
42 #define CONFIG_SYS_TEXT_BASE    0xeff40000
43 #endif
44
45 #ifndef CONFIG_RESET_VECTOR_ADDRESS
46 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
47 #endif
48
49 #define CONFIG_SYS_FSL_CPC              /* Corenet Platform Cache */
50 #define CONFIG_SYS_NUM_CPC              CONFIG_NUM_DDR_CONTROLLERS
51 #define CONFIG_FSL_ELBC                 /* Has Enhanced localbus controller */
52 #define CONFIG_FSL_CAAM                 /* Enable SEC/CAAM */
53 #define CONFIG_PCI                      /* Enable PCI/PCIE */
54 #define CONFIG_PCIE1                    /* PCIE controler 1 */
55 #define CONFIG_PCIE2                    /* PCIE controler 2 */
56 #define CONFIG_PCIE3                    /* PCIE controler 3 */
57 #define CONFIG_FSL_PCI_INIT             /* Use common FSL init code */
58 #define CONFIG_SYS_PCI_64BIT            /* enable 64-bit PCI resources */
59
60 #define CONFIG_SYS_SRIO
61 #define CONFIG_SRIO1                    /* SRIO port 1 */
62 #define CONFIG_SRIO2                    /* SRIO port 2 */
63 #define CONFIG_SRIO_PCIE_BOOT_MASTER
64 #define CONFIG_SYS_DPAA_RMAN            /* RMan */
65
66 #define CONFIG_FSL_LAW                  /* Use common FSL init code */
67
68 #define CONFIG_ENV_OVERWRITE
69
70 #ifdef CONFIG_SYS_NO_FLASH
71 #if !defined(CONFIG_RAMBOOT_PBL) && !defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
72 #define CONFIG_ENV_IS_NOWHERE
73 #endif
74 #else
75 #define CONFIG_FLASH_CFI_DRIVER
76 #define CONFIG_SYS_FLASH_CFI
77 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
78 #endif
79
80 #if defined(CONFIG_SPIFLASH)
81         #define CONFIG_SYS_EXTRA_ENV_RELOC
82         #define CONFIG_ENV_IS_IN_SPI_FLASH
83         #define CONFIG_ENV_SPI_BUS              0
84         #define CONFIG_ENV_SPI_CS               0
85         #define CONFIG_ENV_SPI_MAX_HZ           10000000
86         #define CONFIG_ENV_SPI_MODE             0
87         #define CONFIG_ENV_SIZE                 0x2000          /* 8KB */
88         #define CONFIG_ENV_OFFSET               0x100000        /* 1MB */
89         #define CONFIG_ENV_SECT_SIZE            0x10000
90 #elif defined(CONFIG_SDCARD)
91         #define CONFIG_SYS_EXTRA_ENV_RELOC
92         #define CONFIG_ENV_IS_IN_MMC
93         #define CONFIG_FSL_FIXED_MMC_LOCATION
94         #define CONFIG_SYS_MMC_ENV_DEV          0
95         #define CONFIG_ENV_SIZE                 0x2000
96         #define CONFIG_ENV_OFFSET               (512 * 1658)
97 #elif defined(CONFIG_NAND)
98 #define CONFIG_SYS_EXTRA_ENV_RELOC
99 #define CONFIG_ENV_IS_IN_NAND
100 #define CONFIG_ENV_SIZE                 CONFIG_SYS_NAND_BLOCK_SIZE
101 #define CONFIG_ENV_OFFSET               (7 * CONFIG_SYS_NAND_BLOCK_SIZE)
102 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
103 #define CONFIG_ENV_IS_IN_REMOTE
104 #define CONFIG_ENV_ADDR         0xffe20000
105 #define CONFIG_ENV_SIZE         0x2000
106 #elif defined(CONFIG_ENV_IS_NOWHERE)
107 #define CONFIG_ENV_SIZE         0x2000
108 #else
109         #define CONFIG_ENV_IS_IN_FLASH
110         #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE \
111                         - CONFIG_ENV_SECT_SIZE)
112         #define CONFIG_ENV_SIZE         0x2000
113         #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
114 #endif
115
116 #ifndef __ASSEMBLY__
117 unsigned long get_board_sys_clk(unsigned long dummy);
118 #endif
119 #define CONFIG_SYS_CLK_FREQ     get_board_sys_clk(0)
120
121 /*
122  * These can be toggled for performance analysis, otherwise use default.
123  */
124 #define CONFIG_SYS_CACHE_STASHING
125 #define CONFIG_BACKSIDE_L2_CACHE
126 #define CONFIG_SYS_INIT_L2CSR0          L2CSR0_L2E
127 #define CONFIG_BTB                      /* toggle branch predition */
128
129 #define CONFIG_ENABLE_36BIT_PHYS
130
131 #ifdef CONFIG_PHYS_64BIT
132 #define CONFIG_ADDR_MAP
133 #define CONFIG_SYS_NUM_ADDR_MAP         64      /* number of TLB1 entries */
134 #endif
135
136 #define CONFIG_POST CONFIG_SYS_POST_MEMORY      /* test POST memory test */
137 #define CONFIG_SYS_MEMTEST_START        0x00200000      /* memtest works on */
138 #define CONFIG_SYS_MEMTEST_END          0x00400000
139 #define CONFIG_SYS_ALT_MEMTEST
140 #define CONFIG_PANIC_HANG       /* do not reset board on panic */
141
142 /*
143  *  Config the L3 Cache as L3 SRAM
144  */
145 #define CONFIG_SYS_INIT_L3_ADDR         CONFIG_RAMBOOT_TEXT_BASE
146 #ifdef CONFIG_PHYS_64BIT
147 #define CONFIG_SYS_INIT_L3_ADDR_PHYS    (0xf00000000ull | \
148                 CONFIG_RAMBOOT_TEXT_BASE)
149 #else
150 #define CONFIG_SYS_INIT_L3_ADDR_PHYS    CONFIG_SYS_INIT_L3_ADDR
151 #endif
152 #define CONFIG_SYS_L3_SIZE              (1024 << 10)
153 #define CONFIG_SYS_INIT_L3_END (CONFIG_SYS_INIT_L3_ADDR + CONFIG_SYS_L3_SIZE)
154
155 #ifdef CONFIG_PHYS_64BIT
156 #define CONFIG_SYS_DCSRBAR              0xf0000000
157 #define CONFIG_SYS_DCSRBAR_PHYS         0xf00000000ull
158 #endif
159
160 /* EEPROM */
161 #define CONFIG_ID_EEPROM
162 #define CONFIG_SYS_I2C_EEPROM_NXID
163 #define CONFIG_SYS_EEPROM_BUS_NUM       0
164 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x50
165 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  1
166
167 /*
168  * DDR Setup
169  */
170 #define CONFIG_VERY_BIG_RAM
171 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
172 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
173
174 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
175 #define CONFIG_CHIP_SELECTS_PER_CTRL    (4 * CONFIG_DIMM_SLOTS_PER_CTLR)
176
177 #define CONFIG_DDR_SPD
178 #define CONFIG_SYS_FSL_DDR3
179
180 #define CONFIG_SYS_SPD_BUS_NUM  0
181 #define SPD_EEPROM_ADDRESS      0x52
182 #define CONFIG_SYS_SDRAM_SIZE   4096    /* for fixed parameter use */
183
184 /*
185  * Local Bus Definitions
186  */
187
188 /* Set the local bus clock 1/8 of platform clock */
189 #define CONFIG_SYS_LBC_LCRR             LCRR_CLKDIV_8
190
191 /*
192  * This board doesn't have a promjet connector.
193  * However, it uses commone corenet board LAW and TLB.
194  * It is necessary to use the same start address with proper offset.
195  */
196 #define CONFIG_SYS_FLASH_BASE           0xe0000000
197 #ifdef CONFIG_PHYS_64BIT
198 #define CONFIG_SYS_FLASH_BASE_PHYS      0xfe0000000ull
199 #else
200 #define CONFIG_SYS_FLASH_BASE_PHYS      CONFIG_SYS_FLASH_BASE
201 #endif
202
203 #define CONFIG_SYS_FLASH_BR_PRELIM \
204                 (BR_PHYS_ADDR((CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000)) | \
205                 BR_PS_16 | BR_V)
206 #define CONFIG_SYS_FLASH_OR_PRELIM \
207                 ((0xf8000ff7 & ~OR_GPCM_SCY & ~OR_GPCM_EHTR) \
208                  | OR_GPCM_SCY_8 | OR_GPCM_EHTR_CLEAR)
209
210 #define CONFIG_FSL_CPLD
211 #define CPLD_BASE               0xffdf0000      /* CPLD registers */
212 #ifdef CONFIG_PHYS_64BIT
213 #define CPLD_BASE_PHYS          0xfffdf0000ull
214 #else
215 #define CPLD_BASE_PHYS          CPLD_BASE
216 #endif
217
218 #define CONFIG_SYS_BR3_PRELIM   (BR_PHYS_ADDR(CPLD_BASE_PHYS) | BR_PS_8 | BR_V)
219 #define CONFIG_SYS_OR3_PRELIM   0xffffeff7      /* 32KB but only 4k mapped */
220
221 #define PIXIS_LBMAP_SWITCH      7
222 #define PIXIS_LBMAP_MASK        0xf0
223 #define PIXIS_LBMAP_SHIFT       4
224 #define PIXIS_LBMAP_ALTBANK     0x40
225
226 #define CONFIG_SYS_FLASH_QUIET_TEST
227 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
228
229 #define CONFIG_SYS_MAX_FLASH_BANKS      1               /* number of banks */
230 #define CONFIG_SYS_MAX_FLASH_SECT       1024            /* sectors per device */
231 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000           /* Erase Timeout (ms) */
232 #define CONFIG_SYS_FLASH_WRITE_TOUT     500             /* Write Timeout (ms) */
233
234 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_TEXT_BASE
235
236 #if defined(CONFIG_RAMBOOT_PBL)
237 #define CONFIG_SYS_RAMBOOT
238 #endif
239
240 #define CONFIG_NAND_FSL_ELBC
241 /* Nand Flash */
242 #ifdef CONFIG_NAND_FSL_ELBC
243 #define CONFIG_SYS_NAND_BASE            0xffa00000
244 #ifdef CONFIG_PHYS_64BIT
245 #define CONFIG_SYS_NAND_BASE_PHYS       0xfffa00000ull
246 #else
247 #define CONFIG_SYS_NAND_BASE_PHYS       CONFIG_SYS_NAND_BASE
248 #endif
249
250 #define CONFIG_SYS_NAND_BASE_LIST     {CONFIG_SYS_NAND_BASE}
251 #define CONFIG_SYS_MAX_NAND_DEVICE      1
252 #define CONFIG_MTD_NAND_VERIFY_WRITE
253 #define CONFIG_CMD_NAND
254 #define CONFIG_SYS_NAND_BLOCK_SIZE    (128 * 1024)
255
256 /* NAND flash config */
257 #define CONFIG_SYS_NAND_BR_PRELIM  (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
258                                | (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \
259                                | BR_PS_8               /* Port Size = 8 bit */ \
260                                | BR_MS_FCM             /* MSEL = FCM */ \
261                                | BR_V)                 /* valid */
262 #define CONFIG_SYS_NAND_OR_PRELIM  (0xFFFC0000        /* length 256K */ \
263                                | OR_FCM_PGS            /* Large Page*/ \
264                                | OR_FCM_CSCT \
265                                | OR_FCM_CST \
266                                | OR_FCM_CHT \
267                                | OR_FCM_SCY_1 \
268                                | OR_FCM_TRLX \
269                                | OR_FCM_EHTR)
270
271 #ifdef CONFIG_NAND
272 #define CONFIG_SYS_BR0_PRELIM  CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */
273 #define CONFIG_SYS_OR0_PRELIM  CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
274 #define CONFIG_SYS_BR1_PRELIM  CONFIG_SYS_FLASH_BR_PRELIM /* NOR Base Address */
275 #define CONFIG_SYS_OR1_PRELIM  CONFIG_SYS_FLASH_OR_PRELIM /* NOR Options */
276 #else
277 #define CONFIG_SYS_BR0_PRELIM  CONFIG_SYS_FLASH_BR_PRELIM /* NOR Base Address */
278 #define CONFIG_SYS_OR0_PRELIM  CONFIG_SYS_FLASH_OR_PRELIM /* NOR Options */
279 #define CONFIG_SYS_BR1_PRELIM  CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */
280 #define CONFIG_SYS_OR1_PRELIM  CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
281 #endif
282 #else
283 #define CONFIG_SYS_BR0_PRELIM  CONFIG_SYS_FLASH_BR_PRELIM /* NOR Base Address */
284 #define CONFIG_SYS_OR0_PRELIM  CONFIG_SYS_FLASH_OR_PRELIM /* NOR Options */
285 #endif /* CONFIG_NAND_FSL_ELBC */
286
287 #define CONFIG_SYS_FLASH_EMPTY_INFO
288 #define CONFIG_SYS_FLASH_AMD_CHECK_DQ7
289 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000}
290
291 #define CONFIG_BOARD_EARLY_INIT_F
292 #define CONFIG_BOARD_EARLY_INIT_R       /* call board_early_init_r function */
293 #define CONFIG_MISC_INIT_R
294
295 #define CONFIG_HWCONFIG
296
297 /* define to use L1 as initial stack */
298 #define CONFIG_L1_INIT_RAM
299 #define CONFIG_SYS_INIT_RAM_LOCK
300 #define CONFIG_SYS_INIT_RAM_ADDR        0xffd00000      /* Initial L1 address */
301 #ifdef CONFIG_PHYS_64BIT
302 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf
303 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR
304 /* The assembler doesn't like typecast */
305 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
306         ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
307           CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
308 #else
309 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS   CONFIG_SYS_INIT_RAM_ADDR
310 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0
311 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS
312 #endif
313 #define CONFIG_SYS_INIT_RAM_SIZE        0x00004000
314
315 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - \
316                                         GENERATED_GBL_DATA_SIZE)
317 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
318
319 #define CONFIG_SYS_MONITOR_LEN          (768 * 1024)
320 #define CONFIG_SYS_MALLOC_LEN           (1024 * 1024)
321
322 /* Serial Port - controlled on board with jumper J8
323  * open - index 2
324  * shorted - index 1
325  */
326 #define CONFIG_CONS_INDEX       1
327 #define CONFIG_SYS_NS16550
328 #define CONFIG_SYS_NS16550_SERIAL
329 #define CONFIG_SYS_NS16550_REG_SIZE     1
330 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
331
332 #define CONFIG_SYS_BAUDRATE_TABLE       \
333         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
334
335 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
336 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
337 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
338 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
339
340 /* Use the HUSH parser */
341 #define CONFIG_SYS_HUSH_PARSER
342
343 /* pass open firmware flat tree */
344 #define CONFIG_OF_LIBFDT
345 #define CONFIG_OF_BOARD_SETUP
346 #define CONFIG_OF_STDOUT_VIA_ALIAS
347
348 /* new uImage format support */
349 #define CONFIG_FIT
350 #define CONFIG_FIT_VERBOSE      /* enable fit_format_{error,warning}() */
351
352 /* I2C */
353 #define CONFIG_SYS_I2C
354 #define CONFIG_SYS_I2C_FSL
355 #define CONFIG_SYS_FSL_I2C_SPEED        400000
356 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
357 #define CONFIG_SYS_FSL_I2C_OFFSET       0x118000
358 #define CONFIG_SYS_FSL_I2C2_SPEED       400000
359 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
360 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x118100
361
362 /*
363  * RapidIO
364  */
365 #define CONFIG_SYS_SRIO1_MEM_VIRT       0xa0000000
366 #ifdef CONFIG_PHYS_64BIT
367 #define CONFIG_SYS_SRIO1_MEM_PHYS       0xc20000000ull
368 #else
369 #define CONFIG_SYS_SRIO1_MEM_PHYS       0xa0000000
370 #endif
371 #define CONFIG_SYS_SRIO1_MEM_SIZE       0x10000000      /* 256M */
372
373 #define CONFIG_SYS_SRIO2_MEM_VIRT       0xb0000000
374 #ifdef CONFIG_PHYS_64BIT
375 #define CONFIG_SYS_SRIO2_MEM_PHYS       0xc30000000ull
376 #else
377 #define CONFIG_SYS_SRIO2_MEM_PHYS       0xb0000000
378 #endif
379 #define CONFIG_SYS_SRIO2_MEM_SIZE       0x10000000      /* 256M */
380
381 /*
382  * for slave u-boot IMAGE instored in master memory space,
383  * PHYS must be aligned based on the SIZE
384  */
385 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef200000ull
386 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff00000ull
387 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE 0x100000       /* 1M */
388 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff00000ull
389 /*
390  * for slave UCODE and ENV instored in master memory space,
391  * PHYS must be aligned based on the SIZE
392  */
393 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef100000ull
394 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0x3ffe00000ull
395 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE 0x40000    /* 256K */
396
397 /* slave core release by master*/
398 #define CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET 0xe00e4
399 #define CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK 0x00000001 /* release core 0 */
400
401 /*
402  * SRIO_PCIE_BOOT - SLAVE
403  */
404 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
405 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR 0xFFE00000
406 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS \
407                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR)
408 #endif
409
410 /*
411  * eSPI - Enhanced SPI
412  */
413 #define CONFIG_FSL_ESPI
414 #define CONFIG_SPI_FLASH
415 #define CONFIG_SPI_FLASH_SPANSION
416 #define CONFIG_CMD_SF
417 #define CONFIG_SF_DEFAULT_SPEED         10000000
418 #define CONFIG_SF_DEFAULT_MODE          0
419
420 /*
421  * General PCI
422  * Memory space is mapped 1-1, but I/O space must start from 0.
423  */
424
425 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
426 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
427 #ifdef CONFIG_PHYS_64BIT
428 #define CONFIG_SYS_PCIE1_MEM_BUS        0xe0000000
429 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
430 #else
431 #define CONFIG_SYS_PCIE1_MEM_BUS        0x80000000
432 #define CONFIG_SYS_PCIE1_MEM_PHYS       0x80000000
433 #endif
434 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x20000000      /* 512M */
435 #define CONFIG_SYS_PCIE1_IO_VIRT        0xf8000000
436 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
437 #ifdef CONFIG_PHYS_64BIT
438 #define CONFIG_SYS_PCIE1_IO_PHYS        0xff8000000ull
439 #else
440 #define CONFIG_SYS_PCIE1_IO_PHYS        0xf8000000
441 #endif
442 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
443
444 /* controller 2, Slot 2, tgtid 2, Base address 201000 */
445 #define CONFIG_SYS_PCIE2_MEM_VIRT       0xa0000000
446 #ifdef CONFIG_PHYS_64BIT
447 #define CONFIG_SYS_PCIE2_MEM_BUS        0xe0000000
448 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc20000000ull
449 #else
450 #define CONFIG_SYS_PCIE2_MEM_BUS        0xa0000000
451 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xa0000000
452 #endif
453 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x20000000      /* 512M */
454 #define CONFIG_SYS_PCIE2_IO_VIRT        0xf8010000
455 #define CONFIG_SYS_PCIE2_IO_BUS         0x00000000
456 #ifdef CONFIG_PHYS_64BIT
457 #define CONFIG_SYS_PCIE2_IO_PHYS        0xff8010000ull
458 #else
459 #define CONFIG_SYS_PCIE2_IO_PHYS        0xf8010000
460 #endif
461 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00010000      /* 64k */
462
463 /* controller 3, Slot 1, tgtid 1, Base address 202000 */
464 #define CONFIG_SYS_PCIE3_MEM_VIRT       0xc0000000
465 #ifdef CONFIG_PHYS_64BIT
466 #define CONFIG_SYS_PCIE3_MEM_BUS        0xe0000000
467 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc40000000ull
468 #else
469 #define CONFIG_SYS_PCIE3_MEM_BUS        0xc0000000
470 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc0000000
471 #endif
472 #define CONFIG_SYS_PCIE3_MEM_SIZE       0x20000000      /* 512M */
473 #define CONFIG_SYS_PCIE3_IO_VIRT        0xf8020000
474 #define CONFIG_SYS_PCIE3_IO_BUS         0x00000000
475 #ifdef CONFIG_PHYS_64BIT
476 #define CONFIG_SYS_PCIE3_IO_PHYS        0xff8020000ull
477 #else
478 #define CONFIG_SYS_PCIE3_IO_PHYS        0xf8020000
479 #endif
480 #define CONFIG_SYS_PCIE3_IO_SIZE        0x00010000      /* 64k */
481
482 /* Qman/Bman */
483 #define CONFIG_SYS_DPAA_QBMAN           /* Support Q/Bman */
484 #define CONFIG_SYS_BMAN_NUM_PORTALS     10
485 #define CONFIG_SYS_BMAN_MEM_BASE        0xf4000000
486 #ifdef CONFIG_PHYS_64BIT
487 #define CONFIG_SYS_BMAN_MEM_PHYS        0xff4000000ull
488 #else
489 #define CONFIG_SYS_BMAN_MEM_PHYS        CONFIG_SYS_BMAN_MEM_BASE
490 #endif
491 #define CONFIG_SYS_BMAN_MEM_SIZE        0x00200000
492 #define CONFIG_SYS_QMAN_NUM_PORTALS     10
493 #define CONFIG_SYS_QMAN_MEM_BASE        0xf4200000
494 #ifdef CONFIG_PHYS_64BIT
495 #define CONFIG_SYS_QMAN_MEM_PHYS        0xff4200000ull
496 #else
497 #define CONFIG_SYS_QMAN_MEM_PHYS        CONFIG_SYS_QMAN_MEM_BASE
498 #endif
499 #define CONFIG_SYS_QMAN_MEM_SIZE        0x00200000
500
501 #define CONFIG_SYS_DPAA_FMAN
502 #define CONFIG_SYS_DPAA_PME
503 /* Default address of microcode for the Linux Fman driver */
504 #if defined(CONFIG_SPIFLASH)
505 /*
506  * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
507  * env, so we got 0x110000.
508  */
509 #define CONFIG_SYS_QE_FW_IN_SPIFLASH
510 #define CONFIG_SYS_FMAN_FW_ADDR 0x110000
511 #elif defined(CONFIG_SDCARD)
512 /*
513  * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
514  * about 825KB (1650 blocks), Env is stored after the image, and the env size is
515  * 0x2000 (16 blocks), 8 + 1650 + 16 = 1674, enlarge it to 1680.
516  */
517 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC
518 #define CONFIG_SYS_FMAN_FW_ADDR (512 * 1680)
519 #elif defined(CONFIG_NAND)
520 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND
521 #define CONFIG_SYS_FMAN_FW_ADDR (8 * CONFIG_SYS_NAND_BLOCK_SIZE)
522 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
523 /*
524  * Slave has no ucode locally, it can fetch this from remote. When implementing
525  * in two corenet boards, slave's ucode could be stored in master's memory
526  * space, the address can be mapped from slave TLB->slave LAW->
527  * slave SRIO or PCIE outbound window->master inbound window->
528  * master LAW->the ucode address in master's memory space.
529  */
530 #define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE
531 #define CONFIG_SYS_FMAN_FW_ADDR 0xFFE00000
532 #else
533 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
534 #define CONFIG_SYS_FMAN_FW_ADDR 0xEFF00000
535 #endif
536 #define CONFIG_SYS_QE_FMAN_FW_LENGTH    0x10000
537 #define CONFIG_SYS_FDT_PAD              (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
538
539 #ifdef CONFIG_SYS_DPAA_FMAN
540 #define CONFIG_FMAN_ENET
541 #define CONFIG_PHYLIB_10G
542 #define CONFIG_PHY_VITESSE
543 #define CONFIG_PHY_TERANETICS
544 #endif
545
546 #ifdef CONFIG_PCI
547 #define CONFIG_PCI_INDIRECT_BRIDGE
548 #define CONFIG_PCI_PNP                  /* do pci plug-and-play */
549 #define CONFIG_E1000
550
551 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
552 #define CONFIG_DOS_PARTITION
553 #endif  /* CONFIG_PCI */
554
555 /* SATA */
556 #define CONFIG_FSL_SATA_V2
557
558 #ifdef CONFIG_FSL_SATA_V2
559 #define CONFIG_FSL_SATA
560 #define CONFIG_LIBATA
561
562 #define CONFIG_SYS_SATA_MAX_DEVICE      2
563 #define CONFIG_SATA1
564 #define CONFIG_SYS_SATA1                CONFIG_SYS_MPC85xx_SATA1_ADDR
565 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
566 #define CONFIG_SATA2
567 #define CONFIG_SYS_SATA2                CONFIG_SYS_MPC85xx_SATA2_ADDR
568 #define CONFIG_SYS_SATA2_FLAGS          FLAGS_DMA
569
570 #define CONFIG_LBA48
571 #define CONFIG_CMD_SATA
572 #define CONFIG_DOS_PARTITION
573 #define CONFIG_CMD_EXT2
574 #endif
575
576 #ifdef CONFIG_FMAN_ENET
577 #define CONFIG_SYS_FM1_DTSEC1_PHY_ADDR  0x2
578 #define CONFIG_SYS_FM1_DTSEC2_PHY_ADDR  0x3
579 #define CONFIG_SYS_FM1_DTSEC3_PHY_ADDR  0x4
580 #define CONFIG_SYS_FM1_DTSEC4_PHY_ADDR  0x1
581 #define CONFIG_SYS_FM1_DTSEC5_PHY_ADDR  0x0
582
583 #define CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR    0x1c
584 #define CONFIG_SYS_FM1_DTSEC2_RISER_PHY_ADDR    0x1d
585 #define CONFIG_SYS_FM1_DTSEC3_RISER_PHY_ADDR    0x1e
586 #define CONFIG_SYS_FM1_DTSEC4_RISER_PHY_ADDR    0x1f
587
588 #define CONFIG_SYS_FM1_10GEC1_PHY_ADDR  0
589
590 #define CONFIG_SYS_TBIPA_VALUE  8
591 #define CONFIG_MII              /* MII PHY management */
592 #define CONFIG_ETHPRIME         "FM1@DTSEC1"
593 #define CONFIG_PHY_GIGE         /* Include GbE speed/duplex detection */
594 #endif
595
596 /*
597  * Environment
598  */
599 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
600 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
601
602 /*
603  * Command line configuration.
604  */
605 #include <config_cmd_default.h>
606
607 #define CONFIG_CMD_DHCP
608 #define CONFIG_CMD_ELF
609 #define CONFIG_CMD_ERRATA
610 #define CONFIG_CMD_GREPENV
611 #define CONFIG_CMD_IRQ
612 #define CONFIG_CMD_I2C
613 #define CONFIG_CMD_MII
614 #define CONFIG_CMD_PING
615 #define CONFIG_CMD_SETEXPR
616
617 #ifdef CONFIG_PCI
618 #define CONFIG_CMD_PCI
619 #define CONFIG_CMD_NET
620 #endif
621
622 /*
623 * USB
624 */
625 #define CONFIG_HAS_FSL_DR_USB
626 #define CONFIG_HAS_FSL_MPH_USB
627
628 #if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB)
629 #define CONFIG_CMD_USB
630 #define CONFIG_USB_STORAGE
631 #define CONFIG_USB_EHCI
632 #define CONFIG_USB_EHCI_FSL
633 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
634 #endif
635
636 #define CONFIG_CMD_EXT2
637
638 #define CONFIG_MMC
639
640 #ifdef CONFIG_MMC
641 #define CONFIG_FSL_ESDHC
642 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
643 #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
644 #define CONFIG_CMD_MMC
645 #define CONFIG_GENERIC_MMC
646 #define CONFIG_CMD_EXT2
647 #define CONFIG_CMD_FAT
648 #define CONFIG_DOS_PARTITION
649 #endif
650
651 /* Hash command with SHA acceleration supported in hardware */
652 #ifdef CONFIG_FSL_CAAM
653 #define CONFIG_CMD_HASH
654 #define CONFIG_SHA_HW_ACCEL
655 #endif
656
657 /*
658  * Miscellaneous configurable options
659  */
660 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
661 #define CONFIG_CMDLINE_EDITING                  /* Command-line editing */
662 #define CONFIG_AUTO_COMPLETE                    /* add autocompletion support */
663 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
664 #ifdef CONFIG_CMD_KGDB
665 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size */
666 #else
667 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size */
668 #endif
669 /* Print Buffer Size */
670 #define CONFIG_SYS_PBSIZE       (CONFIG_SYS_CBSIZE + \
671                                 sizeof(CONFIG_SYS_PROMPT)+16)
672 #define CONFIG_SYS_MAXARGS      16              /* max number of command args */
673 /* Boot Argument Buffer Size */
674 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE
675
676 /*
677  * For booting Linux, the board info and command line data
678  * have to be in the first 64 MB of memory, since this is
679  * the maximum mapped by the Linux kernel during initialization.
680  */
681 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial Memory for Linux */
682 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
683
684 #ifdef CONFIG_CMD_KGDB
685 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
686 #endif
687
688 /*
689  * Environment Configuration
690  */
691 #define CONFIG_ROOTPATH         "/opt/nfsroot"
692 #define CONFIG_BOOTFILE         "uImage"
693 #define CONFIG_UBOOTPATH        u-boot.bin
694
695 /* default location for tftp and bootm */
696 #define CONFIG_LOADADDR         1000000
697
698 #define CONFIG_BOOTDELAY        10      /* -1 disables auto-boot */
699
700 #define CONFIG_BAUDRATE 115200
701
702 #define __USB_PHY_TYPE  utmi
703
704 #define CONFIG_EXTRA_ENV_SETTINGS                               \
705         "hwconfig=fsl_ddr:ctlr_intlv=cacheline,"                \
706         "bank_intlv=cs0_cs1\0"                                  \
707         "netdev=eth0\0"                                         \
708         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"                     \
709         "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"             \
710         "tftpflash=tftpboot $loadaddr $uboot && "               \
711         "protect off $ubootaddr +$filesize && "                 \
712         "erase $ubootaddr +$filesize && "                       \
713         "cp.b $loadaddr $ubootaddr $filesize && "               \
714         "protect on $ubootaddr +$filesize && "                  \
715         "cmp.b $loadaddr $ubootaddr $filesize\0"                \
716         "consoledev=ttyS0\0"                                    \
717         "usb_phy_type=" __stringify(__USB_PHY_TYPE) "\0"                \
718         "usb_dr_mode=host\0"                                    \
719         "ramdiskaddr=2000000\0"                                 \
720         "ramdiskfile=p2041rdb/ramdisk.uboot\0"                  \
721         "fdtaddr=c00000\0"                                      \
722         "fdtfile=p2041rdb/p2041rdb.dtb\0"                       \
723         "bdev=sda3\0"
724
725 #define CONFIG_HDBOOT                                   \
726         "setenv bootargs root=/dev/$bdev rw "           \
727         "console=$consoledev,$baudrate $othbootargs;"   \
728         "tftp $loadaddr $bootfile;"                     \
729         "tftp $fdtaddr $fdtfile;"                       \
730         "bootm $loadaddr - $fdtaddr"
731
732 #define CONFIG_NFSBOOTCOMMAND                   \
733         "setenv bootargs root=/dev/nfs rw "     \
734         "nfsroot=$serverip:$rootpath "          \
735         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
736         "console=$consoledev,$baudrate $othbootargs;"   \
737         "tftp $loadaddr $bootfile;"             \
738         "tftp $fdtaddr $fdtfile;"               \
739         "bootm $loadaddr - $fdtaddr"
740
741 #define CONFIG_RAMBOOTCOMMAND                           \
742         "setenv bootargs root=/dev/ram rw "             \
743         "console=$consoledev,$baudrate $othbootargs;"   \
744         "tftp $ramdiskaddr $ramdiskfile;"               \
745         "tftp $loadaddr $bootfile;"                     \
746         "tftp $fdtaddr $fdtfile;"                       \
747         "bootm $loadaddr $ramdiskaddr $fdtaddr"
748
749 #define CONFIG_BOOTCOMMAND              CONFIG_HDBOOT
750
751 #include <asm/fsl_secure_boot.h>
752
753 #ifdef CONFIG_SECURE_BOOT
754 #define CONFIG_CMD_BLOB
755 #endif
756
757 #endif  /* __CONFIG_H */