include/configs/P2041RDB.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright 2011-2012 Freescale Semiconductor, Inc.
   4  * Copyright 2020-2021 NXP
   5  */
   6
   7 /*
   8  * P2041 RDB board configuration file
   9  * Also supports P2040 RDB
  10  */
  11 #ifndef __CONFIG_H
  12 #define __CONFIG_H
  13
  14 #ifdef CONFIG_RAMBOOT_PBL
  15 #define CONFIG_RAMBOOT_TEXT_BASE        CONFIG_SYS_TEXT_BASE
  16 #define CONFIG_RESET_VECTOR_ADDRESS     0xfffffffc
  17 #endif
  18
  19 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
  20 /* Set 1M boot space */
  21 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_SYS_TEXT_BASE & 0xfff00000)
  22 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS \
  23                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR)
  24 #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc
  25 #endif
  26
  27 /* High Level Configuration Options */
  28 #define CONFIG_SYS_BOOK3E_HV            /* Category E.HV supported */
  29
  30 #ifndef CONFIG_RESET_VECTOR_ADDRESS
  31 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
  32 #endif
  33
  34 #define CONFIG_SYS_FSL_CPC              /* Corenet Platform Cache */
  35 #define CONFIG_SYS_NUM_CPC              CONFIG_SYS_NUM_DDR_CTLRS
  36 #define CONFIG_PCIE1                    /* PCIE controller 1 */
  37 #define CONFIG_PCIE2                    /* PCIE controller 2 */
  38 #define CONFIG_PCIE3                    /* PCIE controller 3 */
  39
  40 #define CONFIG_SYS_SRIO
  41 #define CONFIG_SRIO1                    /* SRIO port 1 */
  42 #define CONFIG_SRIO2                    /* SRIO port 2 */
  43 #define CONFIG_SRIO_PCIE_BOOT_MASTER
  44 #define CONFIG_SYS_DPAA_RMAN            /* RMan */
  45
  46 #if defined(CONFIG_SPIFLASH)
  47 #elif defined(CONFIG_SDCARD)
  48         #define CONFIG_FSL_FIXED_MMC_LOCATION
  49 #endif
  50
  51 #ifndef __ASSEMBLY__
  52 unsigned long get_board_sys_clk(unsigned long dummy);
  53 #include <linux/stringify.h>
  54 #endif
  55 #define CONFIG_SYS_CLK_FREQ     get_board_sys_clk(0)
  56
  57 /*
  58  * These can be toggled for performance analysis, otherwise use default.
  59  */
  60 #define CONFIG_SYS_CACHE_STASHING
  61 #define CONFIG_BACKSIDE_L2_CACHE
  62 #define CONFIG_SYS_INIT_L2CSR0          L2CSR0_L2E
  63 #define CONFIG_BTB                      /* toggle branch predition */
  64
  65 #define CONFIG_ENABLE_36BIT_PHYS
  66
  67 #define CONFIG_POST CONFIG_SYS_POST_MEMORY      /* test POST memory test */
  68
  69 /*
  70  *  Config the L3 Cache as L3 SRAM
  71  */
  72 #define CONFIG_SYS_INIT_L3_ADDR         CONFIG_RAMBOOT_TEXT_BASE
  73 #ifdef CONFIG_PHYS_64BIT
  74 #define CONFIG_SYS_INIT_L3_ADDR_PHYS    (0xf00000000ull | \
  75                 CONFIG_RAMBOOT_TEXT_BASE)
  76 #else
  77 #define CONFIG_SYS_INIT_L3_ADDR_PHYS    CONFIG_SYS_INIT_L3_ADDR
  78 #endif
  79 #define CONFIG_SYS_L3_SIZE              (1024 << 10)
  80 #define CONFIG_SYS_INIT_L3_END (CONFIG_SYS_INIT_L3_ADDR + CONFIG_SYS_L3_SIZE)
  81
  82 #ifdef CONFIG_PHYS_64BIT
  83 #define CONFIG_SYS_DCSRBAR              0xf0000000
  84 #define CONFIG_SYS_DCSRBAR_PHYS         0xf00000000ull
  85 #endif
  86
  87 /* EEPROM */
  88 #define CONFIG_SYS_I2C_EEPROM_NXID
  89 #define CONFIG_SYS_EEPROM_BUS_NUM       0
  90
  91 /*
  92  * DDR Setup
  93  */
  94 #define CONFIG_VERY_BIG_RAM
  95 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
  96 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
  97
  98 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
  99 #define CONFIG_CHIP_SELECTS_PER_CTRL    (4 * CONFIG_DIMM_SLOTS_PER_CTLR)
 100
 101 #define CONFIG_SYS_SPD_BUS_NUM  0
 102 #define SPD_EEPROM_ADDRESS      0x52
 103 #define CONFIG_SYS_SDRAM_SIZE   4096    /* for fixed parameter use */
 104
 105 /*
 106  * Local Bus Definitions
 107  */
 108
 109 /* Set the local bus clock 1/8 of platform clock */
 110 #define CONFIG_SYS_LBC_LCRR             LCRR_CLKDIV_8
 111
 112 /*
 113  * This board doesn't have a promjet connector.
 114  * However, it uses commone corenet board LAW and TLB.
 115  * It is necessary to use the same start address with proper offset.
 116  */
 117 #define CONFIG_SYS_FLASH_BASE           0xe0000000
 118 #ifdef CONFIG_PHYS_64BIT
 119 #define CONFIG_SYS_FLASH_BASE_PHYS      0xfe0000000ull
 120 #else
 121 #define CONFIG_SYS_FLASH_BASE_PHYS      CONFIG_SYS_FLASH_BASE
 122 #endif
 123
 124 #define CONFIG_SYS_FLASH_BR_PRELIM \
 125                 (BR_PHYS_ADDR((CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000)) | \
 126                 BR_PS_16 | BR_V)
 127 #define CONFIG_SYS_FLASH_OR_PRELIM \
 128                 ((0xf8000ff7 & ~OR_GPCM_SCY & ~OR_GPCM_EHTR) \
 129                  | OR_GPCM_SCY_8 | OR_GPCM_EHTR_CLEAR)
 130
 131 #define CONFIG_FSL_CPLD
 132 #define CPLD_BASE               0xffdf0000      /* CPLD registers */
 133 #ifdef CONFIG_PHYS_64BIT
 134 #define CPLD_BASE_PHYS          0xfffdf0000ull
 135 #else
 136 #define CPLD_BASE_PHYS          CPLD_BASE
 137 #endif
 138
 139 #define PIXIS_LBMAP_SWITCH      7
 140 #define PIXIS_LBMAP_MASK        0xf0
 141 #define PIXIS_LBMAP_SHIFT       4
 142 #define PIXIS_LBMAP_ALTBANK     0x40
 143
 144 #define CONFIG_SYS_FLASH_QUIET_TEST
 145 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
 146
 147 #define CONFIG_SYS_MAX_FLASH_BANKS      1               /* number of banks */
 148 #define CONFIG_SYS_MAX_FLASH_SECT       1024            /* sectors per device */
 149 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000           /* Erase Timeout (ms) */
 150 #define CONFIG_SYS_FLASH_WRITE_TOUT     500             /* Write Timeout (ms) */
 151
 152 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_TEXT_BASE
 153
 154 #if defined(CONFIG_RAMBOOT_PBL)
 155 #define CONFIG_SYS_RAMBOOT
 156 #endif
 157
 158 /* Nand Flash */
 159 #ifdef CONFIG_NAND_FSL_ELBC
 160 #define CONFIG_SYS_NAND_BASE            0xffa00000
 161 #ifdef CONFIG_PHYS_64BIT
 162 #define CONFIG_SYS_NAND_BASE_PHYS       0xfffa00000ull
 163 #else
 164 #define CONFIG_SYS_NAND_BASE_PHYS       CONFIG_SYS_NAND_BASE
 165 #endif
 166
 167 #define CONFIG_SYS_NAND_BASE_LIST     {CONFIG_SYS_NAND_BASE}
 168 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 169
 170 /* NAND flash config */
 171 #define CONFIG_SYS_NAND_BR_PRELIM  (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 172                                | (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \
 173                                | BR_PS_8               /* Port Size = 8 bit */ \
 174                                | BR_MS_FCM             /* MSEL = FCM */ \
 175                                | BR_V)                 /* valid */
 176 #define CONFIG_SYS_NAND_OR_PRELIM  (0xFFFC0000        /* length 256K */ \
 177                                | OR_FCM_PGS            /* Large Page*/ \
 178                                | OR_FCM_CSCT \
 179                                | OR_FCM_CST \
 180                                | OR_FCM_CHT \
 181                                | OR_FCM_SCY_1 \
 182                                | OR_FCM_TRLX \
 183                                | OR_FCM_EHTR)
 184 #endif /* CONFIG_NAND_FSL_ELBC */
 185
 186 #define CONFIG_SYS_FLASH_EMPTY_INFO
 187 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000}
 188
 189 #define CONFIG_HWCONFIG
 190
 191 /* define to use L1 as initial stack */
 192 #define CONFIG_L1_INIT_RAM
 193 #define CONFIG_SYS_INIT_RAM_LOCK
 194 #define CONFIG_SYS_INIT_RAM_ADDR        0xffd00000      /* Initial L1 address */
 195 #ifdef CONFIG_PHYS_64BIT
 196 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf
 197 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR
 198 /* The assembler doesn't like typecast */
 199 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
 200         ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
 201           CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
 202 #else
 203 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS   CONFIG_SYS_INIT_RAM_ADDR
 204 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0
 205 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS
 206 #endif
 207 #define CONFIG_SYS_INIT_RAM_SIZE        0x00004000
 208
 209 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - \
 210                                         GENERATED_GBL_DATA_SIZE)
 211 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 212
 213 #define CONFIG_SYS_MONITOR_LEN          (768 * 1024)
 214
 215 /* Serial Port - controlled on board with jumper J8
 216  * open - index 2
 217  * shorted - index 1
 218  */
 219 #define CONFIG_SYS_NS16550_SERIAL
 220 #define CONFIG_SYS_NS16550_REG_SIZE     1
 221 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
 222
 223 #define CONFIG_SYS_BAUDRATE_TABLE       \
 224         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 225
 226 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
 227 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
 228 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
 229 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
 230
 231 /* I2C */
 232
 233
 234 /*
 235  * RapidIO
 236  */
 237 #define CONFIG_SYS_SRIO1_MEM_VIRT       0xa0000000
 238 #ifdef CONFIG_PHYS_64BIT
 239 #define CONFIG_SYS_SRIO1_MEM_PHYS       0xc20000000ull
 240 #else
 241 #define CONFIG_SYS_SRIO1_MEM_PHYS       0xa0000000
 242 #endif
 243 #define CONFIG_SYS_SRIO1_MEM_SIZE       0x10000000      /* 256M */
 244
 245 #define CONFIG_SYS_SRIO2_MEM_VIRT       0xb0000000
 246 #ifdef CONFIG_PHYS_64BIT
 247 #define CONFIG_SYS_SRIO2_MEM_PHYS       0xc30000000ull
 248 #else
 249 #define CONFIG_SYS_SRIO2_MEM_PHYS       0xb0000000
 250 #endif
 251 #define CONFIG_SYS_SRIO2_MEM_SIZE       0x10000000      /* 256M */
 252
 253 /*
 254  * for slave u-boot IMAGE instored in master memory space,
 255  * PHYS must be aligned based on the SIZE
 256  */
 257 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef200000ull
 258 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff00000ull
 259 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE 0x100000       /* 1M */
 260 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff00000ull
 261 /*
 262  * for slave UCODE and ENV instored in master memory space,
 263  * PHYS must be aligned based on the SIZE
 264  */
 265 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef100000ull
 266 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0x3ffe00000ull
 267 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE 0x40000    /* 256K */
 268
 269 /* slave core release by master*/
 270 #define CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET 0xe00e4
 271 #define CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK 0x00000001 /* release core 0 */
 272
 273 /*
 274  * SRIO_PCIE_BOOT - SLAVE
 275  */
 276 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
 277 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR 0xFFE00000
 278 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS \
 279                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR)
 280 #endif
 281
 282 /*
 283  * eSPI - Enhanced SPI
 284  */
 285
 286 /*
 287  * General PCI
 288  * Memory space is mapped 1-1, but I/O space must start from 0.
 289  */
 290
 291 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
 292 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
 293 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
 294 #define CONFIG_SYS_PCIE1_IO_VIRT        0xf8000000
 295 #define CONFIG_SYS_PCIE1_IO_PHYS        0xff8000000ull
 296
 297 /* controller 2, Slot 2, tgtid 2, Base address 201000 */
 298 #define CONFIG_SYS_PCIE2_MEM_VIRT       0xa0000000
 299 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc20000000ull
 300 #define CONFIG_SYS_PCIE2_IO_VIRT        0xf8010000
 301 #define CONFIG_SYS_PCIE2_IO_PHYS        0xff8010000ull
 302
 303 /* controller 3, Slot 1, tgtid 1, Base address 202000 */
 304 #define CONFIG_SYS_PCIE3_MEM_VIRT       0xc0000000
 305 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc40000000ull
 306 #define CONFIG_SYS_PCIE3_IO_VIRT        0xf8020000
 307 #define CONFIG_SYS_PCIE3_IO_PHYS        0xff8020000ull
 308
 309 /* Qman/Bman */
 310 #define CONFIG_SYS_BMAN_NUM_PORTALS     10
 311 #define CONFIG_SYS_BMAN_MEM_BASE        0xf4000000
 312 #ifdef CONFIG_PHYS_64BIT
 313 #define CONFIG_SYS_BMAN_MEM_PHYS        0xff4000000ull
 314 #else
 315 #define CONFIG_SYS_BMAN_MEM_PHYS        CONFIG_SYS_BMAN_MEM_BASE
 316 #endif
 317 #define CONFIG_SYS_BMAN_MEM_SIZE        0x00200000
 318 #define CONFIG_SYS_BMAN_SP_CENA_SIZE    0x4000
 319 #define CONFIG_SYS_BMAN_SP_CINH_SIZE    0x1000
 320 #define CONFIG_SYS_BMAN_CENA_BASE       CONFIG_SYS_BMAN_MEM_BASE
 321 #define CONFIG_SYS_BMAN_CENA_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 322 #define CONFIG_SYS_BMAN_CINH_BASE       (CONFIG_SYS_BMAN_MEM_BASE + \
 323                                         CONFIG_SYS_BMAN_CENA_SIZE)
 324 #define CONFIG_SYS_BMAN_CINH_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 325 #define CONFIG_SYS_BMAN_SWP_ISDR_REG    0xE08
 326 #define CONFIG_SYS_QMAN_NUM_PORTALS     10
 327 #define CONFIG_SYS_QMAN_MEM_BASE        0xf4200000
 328 #ifdef CONFIG_PHYS_64BIT
 329 #define CONFIG_SYS_QMAN_MEM_PHYS        0xff4200000ull
 330 #else
 331 #define CONFIG_SYS_QMAN_MEM_PHYS        CONFIG_SYS_QMAN_MEM_BASE
 332 #endif
 333 #define CONFIG_SYS_QMAN_MEM_SIZE        0x00200000
 334 #define CONFIG_SYS_QMAN_SP_CENA_SIZE    0x4000
 335 #define CONFIG_SYS_QMAN_SP_CINH_SIZE    0x1000
 336 #define CONFIG_SYS_QMAN_CENA_BASE       CONFIG_SYS_QMAN_MEM_BASE
 337 #define CONFIG_SYS_QMAN_CENA_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 338 #define CONFIG_SYS_QMAN_CINH_BASE       (CONFIG_SYS_QMAN_MEM_BASE + \
 339                                         CONFIG_SYS_QMAN_CENA_SIZE)
 340 #define CONFIG_SYS_QMAN_CINH_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 341 #define CONFIG_SYS_QMAN_SWP_ISDR_REG    0xE08
 342
 343 #define CONFIG_SYS_DPAA_FMAN
 344 #define CONFIG_SYS_DPAA_PME
 345 #define CONFIG_SYS_FDT_PAD              (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 346
 347 #ifdef CONFIG_PCI
 348 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 349 #endif  /* CONFIG_PCI */
 350
 351 /* SATA */
 352 #define CONFIG_FSL_SATA_V2
 353
 354 #ifdef CONFIG_FSL_SATA_V2
 355 #define CONFIG_SYS_SATA_MAX_DEVICE      2
 356 #define CONFIG_SATA1
 357 #define CONFIG_SYS_SATA1                CONFIG_SYS_MPC85xx_SATA1_ADDR
 358 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
 359 #define CONFIG_SATA2
 360 #define CONFIG_SYS_SATA2                CONFIG_SYS_MPC85xx_SATA2_ADDR
 361 #define CONFIG_SYS_SATA2_FLAGS          FLAGS_DMA
 362
 363 #define CONFIG_LBA48
 364 #endif
 365
 366 #ifdef CONFIG_FMAN_ENET
 367 #define CONFIG_SYS_FM1_DTSEC1_PHY_ADDR  0x2
 368 #define CONFIG_SYS_FM1_DTSEC2_PHY_ADDR  0x3
 369 #define CONFIG_SYS_FM1_DTSEC3_PHY_ADDR  0x4
 370 #define CONFIG_SYS_FM1_DTSEC4_PHY_ADDR  0x1
 371 #define CONFIG_SYS_FM1_DTSEC5_PHY_ADDR  0x0
 372
 373 #define CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR    0x1c
 374 #define CONFIG_SYS_FM1_DTSEC2_RISER_PHY_ADDR    0x1d
 375 #define CONFIG_SYS_FM1_DTSEC3_RISER_PHY_ADDR    0x1e
 376 #define CONFIG_SYS_FM1_DTSEC4_RISER_PHY_ADDR    0x1f
 377
 378 #define CONFIG_SYS_FM1_10GEC1_PHY_ADDR  0
 379
 380 #define CONFIG_SYS_TBIPA_VALUE  8
 381 #define CONFIG_ETHPRIME         "FM1@DTSEC1"
 382 #endif
 383
 384 /*
 385  * Environment
 386  */
 387 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
 388 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 389
 390 /*
 391 * USB
 392 */
 393 #define CONFIG_HAS_FSL_DR_USB
 394 #define CONFIG_HAS_FSL_MPH_USB
 395
 396 #if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB)
 397 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 398 #endif
 399
 400 #ifdef CONFIG_MMC
 401 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 402 #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
 403 #endif
 404
 405 /*
 406  * Miscellaneous configurable options
 407  */
 408
 409 /*
 410  * For booting Linux, the board info and command line data
 411  * have to be in the first 64 MB of memory, since this is
 412  * the maximum mapped by the Linux kernel during initialization.
 413  */
 414 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial Memory for Linux */
 415 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 416
 417 /*
 418  * Environment Configuration
 419  */
 420 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 421 #define CONFIG_BOOTFILE         "uImage"
 422 #define CONFIG_UBOOTPATH        u-boot.bin
 423
 424 #define __USB_PHY_TYPE  utmi
 425
 426 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 427         "hwconfig=fsl_ddr:ctlr_intlv=cacheline,"                \
 428         "bank_intlv=cs0_cs1\0"                                  \
 429         "netdev=eth0\0"                                         \
 430         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"                     \
 431         "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"             \
 432         "tftpflash=tftpboot $loadaddr $uboot && "               \
 433         "protect off $ubootaddr +$filesize && "                 \
 434         "erase $ubootaddr +$filesize && "                       \
 435         "cp.b $loadaddr $ubootaddr $filesize && "               \
 436         "protect on $ubootaddr +$filesize && "                  \
 437         "cmp.b $loadaddr $ubootaddr $filesize\0"                \
 438         "consoledev=ttyS0\0"                                    \
 439         "usb_phy_type=" __stringify(__USB_PHY_TYPE) "\0"                \
 440         "usb_dr_mode=host\0"                                    \
 441         "ramdiskaddr=2000000\0"                                 \
 442         "ramdiskfile=p2041rdb/ramdisk.uboot\0"                  \
 443         "fdtaddr=1e00000\0"                                     \
 444         "fdtfile=p2041rdb/p2041rdb.dtb\0"                       \
 445         "bdev=sda3\0"
 446
 447 #include <asm/fsl_secure_boot.h>
 448
 449 #endif  /* __CONFIG_H */