Merge git://git.denx.de/u-boot-fsl-qoriq
[platform/kernel/u-boot.git] / include / configs / P2041RDB.h
1 /*
2  * Copyright 2011-2012 Freescale Semiconductor, Inc.
3  *
4  * SPDX-License-Identifier:     GPL-2.0+
5  */
6
7 /*
8  * P2041 RDB board configuration file
9  * Also supports P2040 RDB
10  */
11 #ifndef __CONFIG_H
12 #define __CONFIG_H
13
14 #ifdef CONFIG_RAMBOOT_PBL
15 #define CONFIG_RAMBOOT_TEXT_BASE        CONFIG_SYS_TEXT_BASE
16 #define CONFIG_RESET_VECTOR_ADDRESS     0xfffffffc
17 #define CONFIG_SYS_FSL_PBL_PBI board/freescale/corenet_ds/pbi.cfg
18 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/corenet_ds/rcw_p2041rdb.cfg
19 #endif
20
21 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
22 /* Set 1M boot space */
23 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_SYS_TEXT_BASE & 0xfff00000)
24 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS \
25                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR)
26 #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc
27 #endif
28
29 /* High Level Configuration Options */
30 #define CONFIG_SYS_BOOK3E_HV            /* Category E.HV supported */
31 #define CONFIG_MP                       /* support multiple processors */
32
33 #ifndef CONFIG_SYS_TEXT_BASE
34 #define CONFIG_SYS_TEXT_BASE    0xeff40000
35 #endif
36
37 #ifndef CONFIG_RESET_VECTOR_ADDRESS
38 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
39 #endif
40
41 #define CONFIG_SYS_FSL_CPC              /* Corenet Platform Cache */
42 #define CONFIG_SYS_NUM_CPC              CONFIG_SYS_NUM_DDR_CTLRS
43 #define CONFIG_PCIE1                    /* PCIE controller 1 */
44 #define CONFIG_PCIE2                    /* PCIE controller 2 */
45 #define CONFIG_PCIE3                    /* PCIE controller 3 */
46 #define CONFIG_FSL_PCI_INIT             /* Use common FSL init code */
47 #define CONFIG_SYS_PCI_64BIT            /* enable 64-bit PCI resources */
48
49 #define CONFIG_SYS_SRIO
50 #define CONFIG_SRIO1                    /* SRIO port 1 */
51 #define CONFIG_SRIO2                    /* SRIO port 2 */
52 #define CONFIG_SRIO_PCIE_BOOT_MASTER
53 #define CONFIG_SYS_DPAA_RMAN            /* RMan */
54
55 #define CONFIG_ENV_OVERWRITE
56
57 #ifndef CONFIG_MTD_NOR_FLASH
58 #if !defined(CONFIG_RAMBOOT_PBL) && !defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
59 #define CONFIG_ENV_IS_NOWHERE
60 #endif
61 #else
62 #define CONFIG_FLASH_CFI_DRIVER
63 #define CONFIG_SYS_FLASH_CFI
64 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
65 #endif
66
67 #if defined(CONFIG_SPIFLASH)
68         #define CONFIG_SYS_EXTRA_ENV_RELOC
69         #define CONFIG_ENV_IS_IN_SPI_FLASH
70         #define CONFIG_ENV_SPI_BUS              0
71         #define CONFIG_ENV_SPI_CS               0
72         #define CONFIG_ENV_SPI_MAX_HZ           10000000
73         #define CONFIG_ENV_SPI_MODE             0
74         #define CONFIG_ENV_SIZE                 0x2000          /* 8KB */
75         #define CONFIG_ENV_OFFSET               0x100000        /* 1MB */
76         #define CONFIG_ENV_SECT_SIZE            0x10000
77 #elif defined(CONFIG_SDCARD)
78         #define CONFIG_SYS_EXTRA_ENV_RELOC
79         #define CONFIG_ENV_IS_IN_MMC
80         #define CONFIG_FSL_FIXED_MMC_LOCATION
81         #define CONFIG_SYS_MMC_ENV_DEV          0
82         #define CONFIG_ENV_SIZE                 0x2000
83         #define CONFIG_ENV_OFFSET               (512 * 1658)
84 #elif defined(CONFIG_NAND)
85 #define CONFIG_SYS_EXTRA_ENV_RELOC
86 #define CONFIG_ENV_IS_IN_NAND
87 #define CONFIG_ENV_SIZE                 CONFIG_SYS_NAND_BLOCK_SIZE
88 #define CONFIG_ENV_OFFSET               (7 * CONFIG_SYS_NAND_BLOCK_SIZE)
89 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
90 #define CONFIG_ENV_IS_IN_REMOTE
91 #define CONFIG_ENV_ADDR         0xffe20000
92 #define CONFIG_ENV_SIZE         0x2000
93 #elif defined(CONFIG_ENV_IS_NOWHERE)
94 #define CONFIG_ENV_SIZE         0x2000
95 #else
96         #define CONFIG_ENV_IS_IN_FLASH
97         #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE \
98                         - CONFIG_ENV_SECT_SIZE)
99         #define CONFIG_ENV_SIZE         0x2000
100         #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
101 #endif
102
103 #ifndef __ASSEMBLY__
104 unsigned long get_board_sys_clk(unsigned long dummy);
105 #endif
106 #define CONFIG_SYS_CLK_FREQ     get_board_sys_clk(0)
107
108 /*
109  * These can be toggled for performance analysis, otherwise use default.
110  */
111 #define CONFIG_SYS_CACHE_STASHING
112 #define CONFIG_BACKSIDE_L2_CACHE
113 #define CONFIG_SYS_INIT_L2CSR0          L2CSR0_L2E
114 #define CONFIG_BTB                      /* toggle branch predition */
115
116 #define CONFIG_ENABLE_36BIT_PHYS
117
118 #ifdef CONFIG_PHYS_64BIT
119 #define CONFIG_ADDR_MAP
120 #define CONFIG_SYS_NUM_ADDR_MAP         64      /* number of TLB1 entries */
121 #endif
122
123 #define CONFIG_POST CONFIG_SYS_POST_MEMORY      /* test POST memory test */
124 #define CONFIG_SYS_MEMTEST_START        0x00200000      /* memtest works on */
125 #define CONFIG_SYS_MEMTEST_END          0x00400000
126 #define CONFIG_SYS_ALT_MEMTEST
127 #define CONFIG_PANIC_HANG       /* do not reset board on panic */
128
129 /*
130  *  Config the L3 Cache as L3 SRAM
131  */
132 #define CONFIG_SYS_INIT_L3_ADDR         CONFIG_RAMBOOT_TEXT_BASE
133 #ifdef CONFIG_PHYS_64BIT
134 #define CONFIG_SYS_INIT_L3_ADDR_PHYS    (0xf00000000ull | \
135                 CONFIG_RAMBOOT_TEXT_BASE)
136 #else
137 #define CONFIG_SYS_INIT_L3_ADDR_PHYS    CONFIG_SYS_INIT_L3_ADDR
138 #endif
139 #define CONFIG_SYS_L3_SIZE              (1024 << 10)
140 #define CONFIG_SYS_INIT_L3_END (CONFIG_SYS_INIT_L3_ADDR + CONFIG_SYS_L3_SIZE)
141
142 #ifdef CONFIG_PHYS_64BIT
143 #define CONFIG_SYS_DCSRBAR              0xf0000000
144 #define CONFIG_SYS_DCSRBAR_PHYS         0xf00000000ull
145 #endif
146
147 /* EEPROM */
148 #define CONFIG_ID_EEPROM
149 #define CONFIG_SYS_I2C_EEPROM_NXID
150 #define CONFIG_SYS_EEPROM_BUS_NUM       0
151 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x50
152 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  1
153
154 /*
155  * DDR Setup
156  */
157 #define CONFIG_VERY_BIG_RAM
158 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
159 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
160
161 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
162 #define CONFIG_CHIP_SELECTS_PER_CTRL    (4 * CONFIG_DIMM_SLOTS_PER_CTLR)
163
164 #define CONFIG_DDR_SPD
165
166 #define CONFIG_SYS_SPD_BUS_NUM  0
167 #define SPD_EEPROM_ADDRESS      0x52
168 #define CONFIG_SYS_SDRAM_SIZE   4096    /* for fixed parameter use */
169
170 /*
171  * Local Bus Definitions
172  */
173
174 /* Set the local bus clock 1/8 of platform clock */
175 #define CONFIG_SYS_LBC_LCRR             LCRR_CLKDIV_8
176
177 /*
178  * This board doesn't have a promjet connector.
179  * However, it uses commone corenet board LAW and TLB.
180  * It is necessary to use the same start address with proper offset.
181  */
182 #define CONFIG_SYS_FLASH_BASE           0xe0000000
183 #ifdef CONFIG_PHYS_64BIT
184 #define CONFIG_SYS_FLASH_BASE_PHYS      0xfe0000000ull
185 #else
186 #define CONFIG_SYS_FLASH_BASE_PHYS      CONFIG_SYS_FLASH_BASE
187 #endif
188
189 #define CONFIG_SYS_FLASH_BR_PRELIM \
190                 (BR_PHYS_ADDR((CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000)) | \
191                 BR_PS_16 | BR_V)
192 #define CONFIG_SYS_FLASH_OR_PRELIM \
193                 ((0xf8000ff7 & ~OR_GPCM_SCY & ~OR_GPCM_EHTR) \
194                  | OR_GPCM_SCY_8 | OR_GPCM_EHTR_CLEAR)
195
196 #define CONFIG_FSL_CPLD
197 #define CPLD_BASE               0xffdf0000      /* CPLD registers */
198 #ifdef CONFIG_PHYS_64BIT
199 #define CPLD_BASE_PHYS          0xfffdf0000ull
200 #else
201 #define CPLD_BASE_PHYS          CPLD_BASE
202 #endif
203
204 #define CONFIG_SYS_BR3_PRELIM   (BR_PHYS_ADDR(CPLD_BASE_PHYS) | BR_PS_8 | BR_V)
205 #define CONFIG_SYS_OR3_PRELIM   0xffffeff7      /* 32KB but only 4k mapped */
206
207 #define PIXIS_LBMAP_SWITCH      7
208 #define PIXIS_LBMAP_MASK        0xf0
209 #define PIXIS_LBMAP_SHIFT       4
210 #define PIXIS_LBMAP_ALTBANK     0x40
211
212 #define CONFIG_SYS_FLASH_QUIET_TEST
213 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
214
215 #define CONFIG_SYS_MAX_FLASH_BANKS      1               /* number of banks */
216 #define CONFIG_SYS_MAX_FLASH_SECT       1024            /* sectors per device */
217 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000           /* Erase Timeout (ms) */
218 #define CONFIG_SYS_FLASH_WRITE_TOUT     500             /* Write Timeout (ms) */
219
220 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_TEXT_BASE
221
222 #if defined(CONFIG_RAMBOOT_PBL)
223 #define CONFIG_SYS_RAMBOOT
224 #endif
225
226 #define CONFIG_NAND_FSL_ELBC
227 /* Nand Flash */
228 #ifdef CONFIG_NAND_FSL_ELBC
229 #define CONFIG_SYS_NAND_BASE            0xffa00000
230 #ifdef CONFIG_PHYS_64BIT
231 #define CONFIG_SYS_NAND_BASE_PHYS       0xfffa00000ull
232 #else
233 #define CONFIG_SYS_NAND_BASE_PHYS       CONFIG_SYS_NAND_BASE
234 #endif
235
236 #define CONFIG_SYS_NAND_BASE_LIST     {CONFIG_SYS_NAND_BASE}
237 #define CONFIG_SYS_MAX_NAND_DEVICE      1
238 #define CONFIG_CMD_NAND
239 #define CONFIG_SYS_NAND_BLOCK_SIZE    (128 * 1024)
240
241 /* NAND flash config */
242 #define CONFIG_SYS_NAND_BR_PRELIM  (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
243                                | (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \
244                                | BR_PS_8               /* Port Size = 8 bit */ \
245                                | BR_MS_FCM             /* MSEL = FCM */ \
246                                | BR_V)                 /* valid */
247 #define CONFIG_SYS_NAND_OR_PRELIM  (0xFFFC0000        /* length 256K */ \
248                                | OR_FCM_PGS            /* Large Page*/ \
249                                | OR_FCM_CSCT \
250                                | OR_FCM_CST \
251                                | OR_FCM_CHT \
252                                | OR_FCM_SCY_1 \
253                                | OR_FCM_TRLX \
254                                | OR_FCM_EHTR)
255
256 #ifdef CONFIG_NAND
257 #define CONFIG_SYS_BR0_PRELIM  CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */
258 #define CONFIG_SYS_OR0_PRELIM  CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
259 #define CONFIG_SYS_BR1_PRELIM  CONFIG_SYS_FLASH_BR_PRELIM /* NOR Base Address */
260 #define CONFIG_SYS_OR1_PRELIM  CONFIG_SYS_FLASH_OR_PRELIM /* NOR Options */
261 #else
262 #define CONFIG_SYS_BR0_PRELIM  CONFIG_SYS_FLASH_BR_PRELIM /* NOR Base Address */
263 #define CONFIG_SYS_OR0_PRELIM  CONFIG_SYS_FLASH_OR_PRELIM /* NOR Options */
264 #define CONFIG_SYS_BR1_PRELIM  CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */
265 #define CONFIG_SYS_OR1_PRELIM  CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
266 #endif
267 #else
268 #define CONFIG_SYS_BR0_PRELIM  CONFIG_SYS_FLASH_BR_PRELIM /* NOR Base Address */
269 #define CONFIG_SYS_OR0_PRELIM  CONFIG_SYS_FLASH_OR_PRELIM /* NOR Options */
270 #endif /* CONFIG_NAND_FSL_ELBC */
271
272 #define CONFIG_SYS_FLASH_EMPTY_INFO
273 #define CONFIG_SYS_FLASH_AMD_CHECK_DQ7
274 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000}
275
276 #define CONFIG_BOARD_EARLY_INIT_R       /* call board_early_init_r function */
277 #define CONFIG_MISC_INIT_R
278
279 #define CONFIG_HWCONFIG
280
281 /* define to use L1 as initial stack */
282 #define CONFIG_L1_INIT_RAM
283 #define CONFIG_SYS_INIT_RAM_LOCK
284 #define CONFIG_SYS_INIT_RAM_ADDR        0xffd00000      /* Initial L1 address */
285 #ifdef CONFIG_PHYS_64BIT
286 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf
287 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR
288 /* The assembler doesn't like typecast */
289 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
290         ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
291           CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
292 #else
293 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS   CONFIG_SYS_INIT_RAM_ADDR
294 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0
295 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS
296 #endif
297 #define CONFIG_SYS_INIT_RAM_SIZE        0x00004000
298
299 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - \
300                                         GENERATED_GBL_DATA_SIZE)
301 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
302
303 #define CONFIG_SYS_MONITOR_LEN          (768 * 1024)
304 #define CONFIG_SYS_MALLOC_LEN           (1024 * 1024)
305
306 /* Serial Port - controlled on board with jumper J8
307  * open - index 2
308  * shorted - index 1
309  */
310 #define CONFIG_CONS_INDEX       1
311 #define CONFIG_SYS_NS16550_SERIAL
312 #define CONFIG_SYS_NS16550_REG_SIZE     1
313 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
314
315 #define CONFIG_SYS_BAUDRATE_TABLE       \
316         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
317
318 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
319 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
320 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
321 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
322
323 /* I2C */
324 #define CONFIG_SYS_I2C
325 #define CONFIG_SYS_I2C_FSL
326 #define CONFIG_SYS_FSL_I2C_SPEED        400000
327 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
328 #define CONFIG_SYS_FSL_I2C_OFFSET       0x118000
329 #define CONFIG_SYS_FSL_I2C2_SPEED       400000
330 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
331 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x118100
332
333 /*
334  * RapidIO
335  */
336 #define CONFIG_SYS_SRIO1_MEM_VIRT       0xa0000000
337 #ifdef CONFIG_PHYS_64BIT
338 #define CONFIG_SYS_SRIO1_MEM_PHYS       0xc20000000ull
339 #else
340 #define CONFIG_SYS_SRIO1_MEM_PHYS       0xa0000000
341 #endif
342 #define CONFIG_SYS_SRIO1_MEM_SIZE       0x10000000      /* 256M */
343
344 #define CONFIG_SYS_SRIO2_MEM_VIRT       0xb0000000
345 #ifdef CONFIG_PHYS_64BIT
346 #define CONFIG_SYS_SRIO2_MEM_PHYS       0xc30000000ull
347 #else
348 #define CONFIG_SYS_SRIO2_MEM_PHYS       0xb0000000
349 #endif
350 #define CONFIG_SYS_SRIO2_MEM_SIZE       0x10000000      /* 256M */
351
352 /*
353  * for slave u-boot IMAGE instored in master memory space,
354  * PHYS must be aligned based on the SIZE
355  */
356 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef200000ull
357 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff00000ull
358 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE 0x100000       /* 1M */
359 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff00000ull
360 /*
361  * for slave UCODE and ENV instored in master memory space,
362  * PHYS must be aligned based on the SIZE
363  */
364 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef100000ull
365 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0x3ffe00000ull
366 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE 0x40000    /* 256K */
367
368 /* slave core release by master*/
369 #define CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET 0xe00e4
370 #define CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK 0x00000001 /* release core 0 */
371
372 /*
373  * SRIO_PCIE_BOOT - SLAVE
374  */
375 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
376 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR 0xFFE00000
377 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS \
378                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR)
379 #endif
380
381 /*
382  * eSPI - Enhanced SPI
383  */
384 #define CONFIG_SF_DEFAULT_SPEED         10000000
385 #define CONFIG_SF_DEFAULT_MODE          0
386
387 /*
388  * General PCI
389  * Memory space is mapped 1-1, but I/O space must start from 0.
390  */
391
392 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
393 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
394 #ifdef CONFIG_PHYS_64BIT
395 #define CONFIG_SYS_PCIE1_MEM_BUS        0xe0000000
396 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
397 #else
398 #define CONFIG_SYS_PCIE1_MEM_BUS        0x80000000
399 #define CONFIG_SYS_PCIE1_MEM_PHYS       0x80000000
400 #endif
401 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x20000000      /* 512M */
402 #define CONFIG_SYS_PCIE1_IO_VIRT        0xf8000000
403 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
404 #ifdef CONFIG_PHYS_64BIT
405 #define CONFIG_SYS_PCIE1_IO_PHYS        0xff8000000ull
406 #else
407 #define CONFIG_SYS_PCIE1_IO_PHYS        0xf8000000
408 #endif
409 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
410
411 /* controller 2, Slot 2, tgtid 2, Base address 201000 */
412 #define CONFIG_SYS_PCIE2_MEM_VIRT       0xa0000000
413 #ifdef CONFIG_PHYS_64BIT
414 #define CONFIG_SYS_PCIE2_MEM_BUS        0xe0000000
415 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc20000000ull
416 #else
417 #define CONFIG_SYS_PCIE2_MEM_BUS        0xa0000000
418 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xa0000000
419 #endif
420 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x20000000      /* 512M */
421 #define CONFIG_SYS_PCIE2_IO_VIRT        0xf8010000
422 #define CONFIG_SYS_PCIE2_IO_BUS         0x00000000
423 #ifdef CONFIG_PHYS_64BIT
424 #define CONFIG_SYS_PCIE2_IO_PHYS        0xff8010000ull
425 #else
426 #define CONFIG_SYS_PCIE2_IO_PHYS        0xf8010000
427 #endif
428 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00010000      /* 64k */
429
430 /* controller 3, Slot 1, tgtid 1, Base address 202000 */
431 #define CONFIG_SYS_PCIE3_MEM_VIRT       0xc0000000
432 #ifdef CONFIG_PHYS_64BIT
433 #define CONFIG_SYS_PCIE3_MEM_BUS        0xe0000000
434 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc40000000ull
435 #else
436 #define CONFIG_SYS_PCIE3_MEM_BUS        0xc0000000
437 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc0000000
438 #endif
439 #define CONFIG_SYS_PCIE3_MEM_SIZE       0x20000000      /* 512M */
440 #define CONFIG_SYS_PCIE3_IO_VIRT        0xf8020000
441 #define CONFIG_SYS_PCIE3_IO_BUS         0x00000000
442 #ifdef CONFIG_PHYS_64BIT
443 #define CONFIG_SYS_PCIE3_IO_PHYS        0xff8020000ull
444 #else
445 #define CONFIG_SYS_PCIE3_IO_PHYS        0xf8020000
446 #endif
447 #define CONFIG_SYS_PCIE3_IO_SIZE        0x00010000      /* 64k */
448
449 /* Qman/Bman */
450 #define CONFIG_SYS_DPAA_QBMAN           /* Support Q/Bman */
451 #define CONFIG_SYS_BMAN_NUM_PORTALS     10
452 #define CONFIG_SYS_BMAN_MEM_BASE        0xf4000000
453 #ifdef CONFIG_PHYS_64BIT
454 #define CONFIG_SYS_BMAN_MEM_PHYS        0xff4000000ull
455 #else
456 #define CONFIG_SYS_BMAN_MEM_PHYS        CONFIG_SYS_BMAN_MEM_BASE
457 #endif
458 #define CONFIG_SYS_BMAN_MEM_SIZE        0x00200000
459 #define CONFIG_SYS_BMAN_SP_CENA_SIZE    0x4000
460 #define CONFIG_SYS_BMAN_SP_CINH_SIZE    0x1000
461 #define CONFIG_SYS_BMAN_CENA_BASE       CONFIG_SYS_BMAN_MEM_BASE
462 #define CONFIG_SYS_BMAN_CENA_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
463 #define CONFIG_SYS_BMAN_CINH_BASE       (CONFIG_SYS_BMAN_MEM_BASE + \
464                                         CONFIG_SYS_BMAN_CENA_SIZE)
465 #define CONFIG_SYS_BMAN_CINH_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
466 #define CONFIG_SYS_BMAN_SWP_ISDR_REG    0xE08
467 #define CONFIG_SYS_QMAN_NUM_PORTALS     10
468 #define CONFIG_SYS_QMAN_MEM_BASE        0xf4200000
469 #ifdef CONFIG_PHYS_64BIT
470 #define CONFIG_SYS_QMAN_MEM_PHYS        0xff4200000ull
471 #else
472 #define CONFIG_SYS_QMAN_MEM_PHYS        CONFIG_SYS_QMAN_MEM_BASE
473 #endif
474 #define CONFIG_SYS_QMAN_MEM_SIZE        0x00200000
475 #define CONFIG_SYS_QMAN_SP_CENA_SIZE    0x4000
476 #define CONFIG_SYS_QMAN_SP_CINH_SIZE    0x1000
477 #define CONFIG_SYS_QMAN_CENA_BASE       CONFIG_SYS_QMAN_MEM_BASE
478 #define CONFIG_SYS_QMAN_CENA_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
479 #define CONFIG_SYS_QMAN_CINH_BASE       (CONFIG_SYS_QMAN_MEM_BASE + \
480                                         CONFIG_SYS_QMAN_CENA_SIZE)
481 #define CONFIG_SYS_QMAN_CINH_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
482 #define CONFIG_SYS_QMAN_SWP_ISDR_REG    0xE08
483
484 #define CONFIG_SYS_DPAA_FMAN
485 #define CONFIG_SYS_DPAA_PME
486 /* Default address of microcode for the Linux Fman driver */
487 #if defined(CONFIG_SPIFLASH)
488 /*
489  * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
490  * env, so we got 0x110000.
491  */
492 #define CONFIG_SYS_QE_FW_IN_SPIFLASH
493 #define CONFIG_SYS_FMAN_FW_ADDR 0x110000
494 #elif defined(CONFIG_SDCARD)
495 /*
496  * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
497  * about 825KB (1650 blocks), Env is stored after the image, and the env size is
498  * 0x2000 (16 blocks), 8 + 1650 + 16 = 1674, enlarge it to 1680.
499  */
500 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC
501 #define CONFIG_SYS_FMAN_FW_ADDR (512 * 1680)
502 #elif defined(CONFIG_NAND)
503 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND
504 #define CONFIG_SYS_FMAN_FW_ADDR (8 * CONFIG_SYS_NAND_BLOCK_SIZE)
505 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
506 /*
507  * Slave has no ucode locally, it can fetch this from remote. When implementing
508  * in two corenet boards, slave's ucode could be stored in master's memory
509  * space, the address can be mapped from slave TLB->slave LAW->
510  * slave SRIO or PCIE outbound window->master inbound window->
511  * master LAW->the ucode address in master's memory space.
512  */
513 #define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE
514 #define CONFIG_SYS_FMAN_FW_ADDR 0xFFE00000
515 #else
516 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
517 #define CONFIG_SYS_FMAN_FW_ADDR 0xEFF00000
518 #endif
519 #define CONFIG_SYS_QE_FMAN_FW_LENGTH    0x10000
520 #define CONFIG_SYS_FDT_PAD              (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
521
522 #ifdef CONFIG_SYS_DPAA_FMAN
523 #define CONFIG_FMAN_ENET
524 #define CONFIG_PHYLIB_10G
525 #define CONFIG_PHY_VITESSE
526 #define CONFIG_PHY_TERANETICS
527 #endif
528
529 #ifdef CONFIG_PCI
530 #define CONFIG_PCI_INDIRECT_BRIDGE
531
532 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
533 #endif  /* CONFIG_PCI */
534
535 /* SATA */
536 #define CONFIG_FSL_SATA_V2
537
538 #ifdef CONFIG_FSL_SATA_V2
539 #define CONFIG_FSL_SATA
540 #define CONFIG_LIBATA
541
542 #define CONFIG_SYS_SATA_MAX_DEVICE      2
543 #define CONFIG_SATA1
544 #define CONFIG_SYS_SATA1                CONFIG_SYS_MPC85xx_SATA1_ADDR
545 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
546 #define CONFIG_SATA2
547 #define CONFIG_SYS_SATA2                CONFIG_SYS_MPC85xx_SATA2_ADDR
548 #define CONFIG_SYS_SATA2_FLAGS          FLAGS_DMA
549
550 #define CONFIG_LBA48
551 #define CONFIG_CMD_SATA
552 #endif
553
554 #ifdef CONFIG_FMAN_ENET
555 #define CONFIG_SYS_FM1_DTSEC1_PHY_ADDR  0x2
556 #define CONFIG_SYS_FM1_DTSEC2_PHY_ADDR  0x3
557 #define CONFIG_SYS_FM1_DTSEC3_PHY_ADDR  0x4
558 #define CONFIG_SYS_FM1_DTSEC4_PHY_ADDR  0x1
559 #define CONFIG_SYS_FM1_DTSEC5_PHY_ADDR  0x0
560
561 #define CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR    0x1c
562 #define CONFIG_SYS_FM1_DTSEC2_RISER_PHY_ADDR    0x1d
563 #define CONFIG_SYS_FM1_DTSEC3_RISER_PHY_ADDR    0x1e
564 #define CONFIG_SYS_FM1_DTSEC4_RISER_PHY_ADDR    0x1f
565
566 #define CONFIG_SYS_FM1_10GEC1_PHY_ADDR  0
567
568 #define CONFIG_SYS_TBIPA_VALUE  8
569 #define CONFIG_MII              /* MII PHY management */
570 #define CONFIG_ETHPRIME         "FM1@DTSEC1"
571 #define CONFIG_PHY_GIGE         /* Include GbE speed/duplex detection */
572 #endif
573
574 /*
575  * Environment
576  */
577 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
578 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
579
580 /*
581  * Command line configuration.
582  */
583
584 #ifdef CONFIG_PCI
585 #define CONFIG_CMD_PCI
586 #endif
587
588 /*
589 * USB
590 */
591 #define CONFIG_HAS_FSL_DR_USB
592 #define CONFIG_HAS_FSL_MPH_USB
593
594 #if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB)
595 #define CONFIG_USB_EHCI_FSL
596 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
597 #endif
598
599 #ifdef CONFIG_MMC
600 #define CONFIG_FSL_ESDHC
601 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
602 #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
603 #endif
604
605 /*
606  * Miscellaneous configurable options
607  */
608 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
609 #define CONFIG_CMDLINE_EDITING                  /* Command-line editing */
610 #define CONFIG_AUTO_COMPLETE                    /* add autocompletion support */
611 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
612 #ifdef CONFIG_CMD_KGDB
613 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size */
614 #else
615 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size */
616 #endif
617 /* Print Buffer Size */
618 #define CONFIG_SYS_PBSIZE       (CONFIG_SYS_CBSIZE + \
619                                 sizeof(CONFIG_SYS_PROMPT)+16)
620 #define CONFIG_SYS_MAXARGS      16              /* max number of command args */
621 /* Boot Argument Buffer Size */
622 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE
623
624 /*
625  * For booting Linux, the board info and command line data
626  * have to be in the first 64 MB of memory, since this is
627  * the maximum mapped by the Linux kernel during initialization.
628  */
629 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial Memory for Linux */
630 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
631
632 #ifdef CONFIG_CMD_KGDB
633 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
634 #endif
635
636 /*
637  * Environment Configuration
638  */
639 #define CONFIG_ROOTPATH         "/opt/nfsroot"
640 #define CONFIG_BOOTFILE         "uImage"
641 #define CONFIG_UBOOTPATH        u-boot.bin
642
643 /* default location for tftp and bootm */
644 #define CONFIG_LOADADDR         1000000
645
646 #define __USB_PHY_TYPE  utmi
647
648 #define CONFIG_EXTRA_ENV_SETTINGS                               \
649         "hwconfig=fsl_ddr:ctlr_intlv=cacheline,"                \
650         "bank_intlv=cs0_cs1\0"                                  \
651         "netdev=eth0\0"                                         \
652         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"                     \
653         "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"             \
654         "tftpflash=tftpboot $loadaddr $uboot && "               \
655         "protect off $ubootaddr +$filesize && "                 \
656         "erase $ubootaddr +$filesize && "                       \
657         "cp.b $loadaddr $ubootaddr $filesize && "               \
658         "protect on $ubootaddr +$filesize && "                  \
659         "cmp.b $loadaddr $ubootaddr $filesize\0"                \
660         "consoledev=ttyS0\0"                                    \
661         "usb_phy_type=" __stringify(__USB_PHY_TYPE) "\0"                \
662         "usb_dr_mode=host\0"                                    \
663         "ramdiskaddr=2000000\0"                                 \
664         "ramdiskfile=p2041rdb/ramdisk.uboot\0"                  \
665         "fdtaddr=1e00000\0"                                     \
666         "fdtfile=p2041rdb/p2041rdb.dtb\0"                       \
667         "bdev=sda3\0"
668
669 #define CONFIG_HDBOOT                                   \
670         "setenv bootargs root=/dev/$bdev rw "           \
671         "console=$consoledev,$baudrate $othbootargs;"   \
672         "tftp $loadaddr $bootfile;"                     \
673         "tftp $fdtaddr $fdtfile;"                       \
674         "bootm $loadaddr - $fdtaddr"
675
676 #define CONFIG_NFSBOOTCOMMAND                   \
677         "setenv bootargs root=/dev/nfs rw "     \
678         "nfsroot=$serverip:$rootpath "          \
679         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
680         "console=$consoledev,$baudrate $othbootargs;"   \
681         "tftp $loadaddr $bootfile;"             \
682         "tftp $fdtaddr $fdtfile;"               \
683         "bootm $loadaddr - $fdtaddr"
684
685 #define CONFIG_RAMBOOTCOMMAND                           \
686         "setenv bootargs root=/dev/ram rw "             \
687         "console=$consoledev,$baudrate $othbootargs;"   \
688         "tftp $ramdiskaddr $ramdiskfile;"               \
689         "tftp $loadaddr $bootfile;"                     \
690         "tftp $fdtaddr $fdtfile;"                       \
691         "bootm $loadaddr $ramdiskaddr $fdtaddr"
692
693 #define CONFIG_BOOTCOMMAND              CONFIG_HDBOOT
694
695 #include <asm/fsl_secure_boot.h>
696
697 #endif  /* __CONFIG_H */