include/configs/P2041RDB.h

   1 /*
   2  * Copyright 2011-2012 Freescale Semiconductor, Inc.
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 /*
   8  * P2041 RDB board configuration file
   9  * Also supports P2040 RDB
  10  */
  11 #ifndef __CONFIG_H
  12 #define __CONFIG_H
  13
  14 #define CONFIG_P2041RDB
  15 #define CONFIG_PHYS_64BIT
  16 #define CONFIG_SYS_GENERIC_BOARD
  17 #define CONFIG_DISPLAY_BOARDINFO
  18 #define CONFIG_PPC_P2041
  19
  20 #ifdef CONFIG_RAMBOOT_PBL
  21 #define CONFIG_RAMBOOT_TEXT_BASE        CONFIG_SYS_TEXT_BASE
  22 #define CONFIG_RESET_VECTOR_ADDRESS     0xfffffffc
  23 #define CONFIG_SYS_FSL_PBL_PBI board/freescale/corenet_ds/pbi.cfg
  24 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/corenet_ds/rcw_p2041rdb.cfg
  25 #endif
  26
  27 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
  28 /* Set 1M boot space */
  29 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_SYS_TEXT_BASE & 0xfff00000)
  30 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS \
  31                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR)
  32 #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc
  33 #define CONFIG_SYS_NO_FLASH
  34 #endif
  35
  36 /* High Level Configuration Options */
  37 #define CONFIG_BOOKE
  38 #define CONFIG_E500                     /* BOOKE e500 family */
  39 #define CONFIG_E500MC                   /* BOOKE e500mc family */
  40 #define CONFIG_SYS_BOOK3E_HV            /* Category E.HV supported */
  41 #define CONFIG_MP                       /* support multiple processors */
  42
  43 #ifndef CONFIG_SYS_TEXT_BASE
  44 #define CONFIG_SYS_TEXT_BASE    0xeff40000
  45 #endif
  46
  47 #ifndef CONFIG_RESET_VECTOR_ADDRESS
  48 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
  49 #endif
  50
  51 #define CONFIG_SYS_FSL_CPC              /* Corenet Platform Cache */
  52 #define CONFIG_SYS_NUM_CPC              CONFIG_NUM_DDR_CONTROLLERS
  53 #define CONFIG_FSL_ELBC                 /* Has Enhanced localbus controller */
  54 #define CONFIG_FSL_CAAM                 /* Enable SEC/CAAM */
  55 #define CONFIG_PCI                      /* Enable PCI/PCIE */
  56 #define CONFIG_PCIE1                    /* PCIE controler 1 */
  57 #define CONFIG_PCIE2                    /* PCIE controler 2 */
  58 #define CONFIG_PCIE3                    /* PCIE controler 3 */
  59 #define CONFIG_FSL_PCI_INIT             /* Use common FSL init code */
  60 #define CONFIG_SYS_PCI_64BIT            /* enable 64-bit PCI resources */
  61
  62 #define CONFIG_SYS_SRIO
  63 #define CONFIG_SRIO1                    /* SRIO port 1 */
  64 #define CONFIG_SRIO2                    /* SRIO port 2 */
  65 #define CONFIG_SRIO_PCIE_BOOT_MASTER
  66 #define CONFIG_SYS_DPAA_RMAN            /* RMan */
  67
  68 #define CONFIG_FSL_LAW                  /* Use common FSL init code */
  69
  70 #define CONFIG_ENV_OVERWRITE
  71
  72 #ifdef CONFIG_SYS_NO_FLASH
  73 #if !defined(CONFIG_RAMBOOT_PBL) && !defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
  74 #define CONFIG_ENV_IS_NOWHERE
  75 #endif
  76 #else
  77 #define CONFIG_FLASH_CFI_DRIVER
  78 #define CONFIG_SYS_FLASH_CFI
  79 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
  80 #endif
  81
  82 #if defined(CONFIG_SPIFLASH)
  83         #define CONFIG_SYS_EXTRA_ENV_RELOC
  84         #define CONFIG_ENV_IS_IN_SPI_FLASH
  85         #define CONFIG_ENV_SPI_BUS              0
  86         #define CONFIG_ENV_SPI_CS               0
  87         #define CONFIG_ENV_SPI_MAX_HZ           10000000
  88         #define CONFIG_ENV_SPI_MODE             0
  89         #define CONFIG_ENV_SIZE                 0x2000          /* 8KB */
  90         #define CONFIG_ENV_OFFSET               0x100000        /* 1MB */
  91         #define CONFIG_ENV_SECT_SIZE            0x10000
  92 #elif defined(CONFIG_SDCARD)
  93         #define CONFIG_SYS_EXTRA_ENV_RELOC
  94         #define CONFIG_ENV_IS_IN_MMC
  95         #define CONFIG_FSL_FIXED_MMC_LOCATION
  96         #define CONFIG_SYS_MMC_ENV_DEV          0
  97         #define CONFIG_ENV_SIZE                 0x2000
  98         #define CONFIG_ENV_OFFSET               (512 * 1658)
  99 #elif defined(CONFIG_NAND)
 100 #define CONFIG_SYS_EXTRA_ENV_RELOC
 101 #define CONFIG_ENV_IS_IN_NAND
 102 #define CONFIG_ENV_SIZE                 CONFIG_SYS_NAND_BLOCK_SIZE
 103 #define CONFIG_ENV_OFFSET               (7 * CONFIG_SYS_NAND_BLOCK_SIZE)
 104 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
 105 #define CONFIG_ENV_IS_IN_REMOTE
 106 #define CONFIG_ENV_ADDR         0xffe20000
 107 #define CONFIG_ENV_SIZE         0x2000
 108 #elif defined(CONFIG_ENV_IS_NOWHERE)
 109 #define CONFIG_ENV_SIZE         0x2000
 110 #else
 111         #define CONFIG_ENV_IS_IN_FLASH
 112         #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE \
 113                         - CONFIG_ENV_SECT_SIZE)
 114         #define CONFIG_ENV_SIZE         0x2000
 115         #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
 116 #endif
 117
 118 #ifndef __ASSEMBLY__
 119 unsigned long get_board_sys_clk(unsigned long dummy);
 120 #endif
 121 #define CONFIG_SYS_CLK_FREQ     get_board_sys_clk(0)
 122
 123 /*
 124  * These can be toggled for performance analysis, otherwise use default.
 125  */
 126 #define CONFIG_SYS_CACHE_STASHING
 127 #define CONFIG_BACKSIDE_L2_CACHE
 128 #define CONFIG_SYS_INIT_L2CSR0          L2CSR0_L2E
 129 #define CONFIG_BTB                      /* toggle branch predition */
 130
 131 #define CONFIG_ENABLE_36BIT_PHYS
 132
 133 #ifdef CONFIG_PHYS_64BIT
 134 #define CONFIG_ADDR_MAP
 135 #define CONFIG_SYS_NUM_ADDR_MAP         64      /* number of TLB1 entries */
 136 #endif
 137
 138 #define CONFIG_POST CONFIG_SYS_POST_MEMORY      /* test POST memory test */
 139 #define CONFIG_SYS_MEMTEST_START        0x00200000      /* memtest works on */
 140 #define CONFIG_SYS_MEMTEST_END          0x00400000
 141 #define CONFIG_SYS_ALT_MEMTEST
 142 #define CONFIG_PANIC_HANG       /* do not reset board on panic */
 143
 144 /*
 145  *  Config the L3 Cache as L3 SRAM
 146  */
 147 #define CONFIG_SYS_INIT_L3_ADDR         CONFIG_RAMBOOT_TEXT_BASE
 148 #ifdef CONFIG_PHYS_64BIT
 149 #define CONFIG_SYS_INIT_L3_ADDR_PHYS    (0xf00000000ull | \
 150                 CONFIG_RAMBOOT_TEXT_BASE)
 151 #else
 152 #define CONFIG_SYS_INIT_L3_ADDR_PHYS    CONFIG_SYS_INIT_L3_ADDR
 153 #endif
 154 #define CONFIG_SYS_L3_SIZE              (1024 << 10)
 155 #define CONFIG_SYS_INIT_L3_END (CONFIG_SYS_INIT_L3_ADDR + CONFIG_SYS_L3_SIZE)
 156
 157 #ifdef CONFIG_PHYS_64BIT
 158 #define CONFIG_SYS_DCSRBAR              0xf0000000
 159 #define CONFIG_SYS_DCSRBAR_PHYS         0xf00000000ull
 160 #endif
 161
 162 /* EEPROM */
 163 #define CONFIG_ID_EEPROM
 164 #define CONFIG_SYS_I2C_EEPROM_NXID
 165 #define CONFIG_SYS_EEPROM_BUS_NUM       0
 166 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x50
 167 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  1
 168
 169 /*
 170  * DDR Setup
 171  */
 172 #define CONFIG_VERY_BIG_RAM
 173 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 174 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 175
 176 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 177 #define CONFIG_CHIP_SELECTS_PER_CTRL    (4 * CONFIG_DIMM_SLOTS_PER_CTLR)
 178
 179 #define CONFIG_DDR_SPD
 180 #define CONFIG_SYS_FSL_DDR3
 181
 182 #define CONFIG_SYS_SPD_BUS_NUM  0
 183 #define SPD_EEPROM_ADDRESS      0x52
 184 #define CONFIG_SYS_SDRAM_SIZE   4096    /* for fixed parameter use */
 185
 186 /*
 187  * Local Bus Definitions
 188  */
 189
 190 /* Set the local bus clock 1/8 of platform clock */
 191 #define CONFIG_SYS_LBC_LCRR             LCRR_CLKDIV_8
 192
 193 /*
 194  * This board doesn't have a promjet connector.
 195  * However, it uses commone corenet board LAW and TLB.
 196  * It is necessary to use the same start address with proper offset.
 197  */
 198 #define CONFIG_SYS_FLASH_BASE           0xe0000000
 199 #ifdef CONFIG_PHYS_64BIT
 200 #define CONFIG_SYS_FLASH_BASE_PHYS      0xfe0000000ull
 201 #else
 202 #define CONFIG_SYS_FLASH_BASE_PHYS      CONFIG_SYS_FLASH_BASE
 203 #endif
 204
 205 #define CONFIG_SYS_FLASH_BR_PRELIM \
 206                 (BR_PHYS_ADDR((CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000)) | \
 207                 BR_PS_16 | BR_V)
 208 #define CONFIG_SYS_FLASH_OR_PRELIM \
 209                 ((0xf8000ff7 & ~OR_GPCM_SCY & ~OR_GPCM_EHTR) \
 210                  | OR_GPCM_SCY_8 | OR_GPCM_EHTR_CLEAR)
 211
 212 #define CONFIG_FSL_CPLD
 213 #define CPLD_BASE               0xffdf0000      /* CPLD registers */
 214 #ifdef CONFIG_PHYS_64BIT
 215 #define CPLD_BASE_PHYS          0xfffdf0000ull
 216 #else
 217 #define CPLD_BASE_PHYS          CPLD_BASE
 218 #endif
 219
 220 #define CONFIG_SYS_BR3_PRELIM   (BR_PHYS_ADDR(CPLD_BASE_PHYS) | BR_PS_8 | BR_V)
 221 #define CONFIG_SYS_OR3_PRELIM   0xffffeff7      /* 32KB but only 4k mapped */
 222
 223 #define PIXIS_LBMAP_SWITCH      7
 224 #define PIXIS_LBMAP_MASK        0xf0
 225 #define PIXIS_LBMAP_SHIFT       4
 226 #define PIXIS_LBMAP_ALTBANK     0x40
 227
 228 #define CONFIG_SYS_FLASH_QUIET_TEST
 229 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
 230
 231 #define CONFIG_SYS_MAX_FLASH_BANKS      1               /* number of banks */
 232 #define CONFIG_SYS_MAX_FLASH_SECT       1024            /* sectors per device */
 233 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000           /* Erase Timeout (ms) */
 234 #define CONFIG_SYS_FLASH_WRITE_TOUT     500             /* Write Timeout (ms) */
 235
 236 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_TEXT_BASE
 237
 238 #if defined(CONFIG_RAMBOOT_PBL)
 239 #define CONFIG_SYS_RAMBOOT
 240 #endif
 241
 242 #define CONFIG_NAND_FSL_ELBC
 243 /* Nand Flash */
 244 #ifdef CONFIG_NAND_FSL_ELBC
 245 #define CONFIG_SYS_NAND_BASE            0xffa00000
 246 #ifdef CONFIG_PHYS_64BIT
 247 #define CONFIG_SYS_NAND_BASE_PHYS       0xfffa00000ull
 248 #else
 249 #define CONFIG_SYS_NAND_BASE_PHYS       CONFIG_SYS_NAND_BASE
 250 #endif
 251
 252 #define CONFIG_SYS_NAND_BASE_LIST     {CONFIG_SYS_NAND_BASE}
 253 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 254 #define CONFIG_MTD_NAND_VERIFY_WRITE
 255 #define CONFIG_CMD_NAND
 256 #define CONFIG_SYS_NAND_BLOCK_SIZE    (128 * 1024)
 257
 258 /* NAND flash config */
 259 #define CONFIG_SYS_NAND_BR_PRELIM  (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 260                                | (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \
 261                                | BR_PS_8               /* Port Size = 8 bit */ \
 262                                | BR_MS_FCM             /* MSEL = FCM */ \
 263                                | BR_V)                 /* valid */
 264 #define CONFIG_SYS_NAND_OR_PRELIM  (0xFFFC0000        /* length 256K */ \
 265                                | OR_FCM_PGS            /* Large Page*/ \
 266                                | OR_FCM_CSCT \
 267                                | OR_FCM_CST \
 268                                | OR_FCM_CHT \
 269                                | OR_FCM_SCY_1 \
 270                                | OR_FCM_TRLX \
 271                                | OR_FCM_EHTR)
 272
 273 #ifdef CONFIG_NAND
 274 #define CONFIG_SYS_BR0_PRELIM  CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */
 275 #define CONFIG_SYS_OR0_PRELIM  CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
 276 #define CONFIG_SYS_BR1_PRELIM  CONFIG_SYS_FLASH_BR_PRELIM /* NOR Base Address */
 277 #define CONFIG_SYS_OR1_PRELIM  CONFIG_SYS_FLASH_OR_PRELIM /* NOR Options */
 278 #else
 279 #define CONFIG_SYS_BR0_PRELIM  CONFIG_SYS_FLASH_BR_PRELIM /* NOR Base Address */
 280 #define CONFIG_SYS_OR0_PRELIM  CONFIG_SYS_FLASH_OR_PRELIM /* NOR Options */
 281 #define CONFIG_SYS_BR1_PRELIM  CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */
 282 #define CONFIG_SYS_OR1_PRELIM  CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
 283 #endif
 284 #else
 285 #define CONFIG_SYS_BR0_PRELIM  CONFIG_SYS_FLASH_BR_PRELIM /* NOR Base Address */
 286 #define CONFIG_SYS_OR0_PRELIM  CONFIG_SYS_FLASH_OR_PRELIM /* NOR Options */
 287 #endif /* CONFIG_NAND_FSL_ELBC */
 288
 289 #define CONFIG_SYS_FLASH_EMPTY_INFO
 290 #define CONFIG_SYS_FLASH_AMD_CHECK_DQ7
 291 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000}
 292
 293 #define CONFIG_BOARD_EARLY_INIT_F
 294 #define CONFIG_BOARD_EARLY_INIT_R       /* call board_early_init_r function */
 295 #define CONFIG_MISC_INIT_R
 296
 297 #define CONFIG_HWCONFIG
 298
 299 /* define to use L1 as initial stack */
 300 #define CONFIG_L1_INIT_RAM
 301 #define CONFIG_SYS_INIT_RAM_LOCK
 302 #define CONFIG_SYS_INIT_RAM_ADDR        0xffd00000      /* Initial L1 address */
 303 #ifdef CONFIG_PHYS_64BIT
 304 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf
 305 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR
 306 /* The assembler doesn't like typecast */
 307 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
 308         ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
 309           CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
 310 #else
 311 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS   CONFIG_SYS_INIT_RAM_ADDR
 312 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0
 313 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS
 314 #endif
 315 #define CONFIG_SYS_INIT_RAM_SIZE        0x00004000
 316
 317 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - \
 318                                         GENERATED_GBL_DATA_SIZE)
 319 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 320
 321 #define CONFIG_SYS_MONITOR_LEN          (768 * 1024)
 322 #define CONFIG_SYS_MALLOC_LEN           (1024 * 1024)
 323
 324 /* Serial Port - controlled on board with jumper J8
 325  * open - index 2
 326  * shorted - index 1
 327  */
 328 #define CONFIG_CONS_INDEX       1
 329 #define CONFIG_SYS_NS16550
 330 #define CONFIG_SYS_NS16550_SERIAL
 331 #define CONFIG_SYS_NS16550_REG_SIZE     1
 332 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
 333
 334 #define CONFIG_SYS_BAUDRATE_TABLE       \
 335         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 336
 337 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
 338 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
 339 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
 340 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
 341
 342 /* Use the HUSH parser */
 343 #define CONFIG_SYS_HUSH_PARSER
 344
 345 /* pass open firmware flat tree */
 346 #define CONFIG_OF_LIBFDT
 347 #define CONFIG_OF_BOARD_SETUP
 348 #define CONFIG_OF_STDOUT_VIA_ALIAS
 349
 350 /* new uImage format support */
 351 #define CONFIG_FIT
 352 #define CONFIG_FIT_VERBOSE      /* enable fit_format_{error,warning}() */
 353
 354 /* I2C */
 355 #define CONFIG_SYS_I2C
 356 #define CONFIG_SYS_I2C_FSL
 357 #define CONFIG_SYS_FSL_I2C_SPEED        400000
 358 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 359 #define CONFIG_SYS_FSL_I2C_OFFSET       0x118000
 360 #define CONFIG_SYS_FSL_I2C2_SPEED       400000
 361 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
 362 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x118100
 363
 364 /*
 365  * RapidIO
 366  */
 367 #define CONFIG_SYS_SRIO1_MEM_VIRT       0xa0000000
 368 #ifdef CONFIG_PHYS_64BIT
 369 #define CONFIG_SYS_SRIO1_MEM_PHYS       0xc20000000ull
 370 #else
 371 #define CONFIG_SYS_SRIO1_MEM_PHYS       0xa0000000
 372 #endif
 373 #define CONFIG_SYS_SRIO1_MEM_SIZE       0x10000000      /* 256M */
 374
 375 #define CONFIG_SYS_SRIO2_MEM_VIRT       0xb0000000
 376 #ifdef CONFIG_PHYS_64BIT
 377 #define CONFIG_SYS_SRIO2_MEM_PHYS       0xc30000000ull
 378 #else
 379 #define CONFIG_SYS_SRIO2_MEM_PHYS       0xb0000000
 380 #endif
 381 #define CONFIG_SYS_SRIO2_MEM_SIZE       0x10000000      /* 256M */
 382
 383 /*
 384  * for slave u-boot IMAGE instored in master memory space,
 385  * PHYS must be aligned based on the SIZE
 386  */
 387 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef200000ull
 388 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff00000ull
 389 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE 0x100000       /* 1M */
 390 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff00000ull
 391 /*
 392  * for slave UCODE and ENV instored in master memory space,
 393  * PHYS must be aligned based on the SIZE
 394  */
 395 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef100000ull
 396 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0x3ffe00000ull
 397 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE 0x40000    /* 256K */
 398
 399 /* slave core release by master*/
 400 #define CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET 0xe00e4
 401 #define CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK 0x00000001 /* release core 0 */
 402
 403 /*
 404  * SRIO_PCIE_BOOT - SLAVE
 405  */
 406 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
 407 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR 0xFFE00000
 408 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS \
 409                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR)
 410 #endif
 411
 412 /*
 413  * eSPI - Enhanced SPI
 414  */
 415 #define CONFIG_FSL_ESPI
 416 #define CONFIG_SPI_FLASH
 417 #define CONFIG_SPI_FLASH_SPANSION
 418 #define CONFIG_CMD_SF
 419 #define CONFIG_SF_DEFAULT_SPEED         10000000
 420 #define CONFIG_SF_DEFAULT_MODE          0
 421
 422 /*
 423  * General PCI
 424  * Memory space is mapped 1-1, but I/O space must start from 0.
 425  */
 426
 427 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
 428 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
 429 #ifdef CONFIG_PHYS_64BIT
 430 #define CONFIG_SYS_PCIE1_MEM_BUS        0xe0000000
 431 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
 432 #else
 433 #define CONFIG_SYS_PCIE1_MEM_BUS        0x80000000
 434 #define CONFIG_SYS_PCIE1_MEM_PHYS       0x80000000
 435 #endif
 436 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x20000000      /* 512M */
 437 #define CONFIG_SYS_PCIE1_IO_VIRT        0xf8000000
 438 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 439 #ifdef CONFIG_PHYS_64BIT
 440 #define CONFIG_SYS_PCIE1_IO_PHYS        0xff8000000ull
 441 #else
 442 #define CONFIG_SYS_PCIE1_IO_PHYS        0xf8000000
 443 #endif
 444 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 445
 446 /* controller 2, Slot 2, tgtid 2, Base address 201000 */
 447 #define CONFIG_SYS_PCIE2_MEM_VIRT       0xa0000000
 448 #ifdef CONFIG_PHYS_64BIT
 449 #define CONFIG_SYS_PCIE2_MEM_BUS        0xe0000000
 450 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc20000000ull
 451 #else
 452 #define CONFIG_SYS_PCIE2_MEM_BUS        0xa0000000
 453 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xa0000000
 454 #endif
 455 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x20000000      /* 512M */
 456 #define CONFIG_SYS_PCIE2_IO_VIRT        0xf8010000
 457 #define CONFIG_SYS_PCIE2_IO_BUS         0x00000000
 458 #ifdef CONFIG_PHYS_64BIT
 459 #define CONFIG_SYS_PCIE2_IO_PHYS        0xff8010000ull
 460 #else
 461 #define CONFIG_SYS_PCIE2_IO_PHYS        0xf8010000
 462 #endif
 463 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00010000      /* 64k */
 464
 465 /* controller 3, Slot 1, tgtid 1, Base address 202000 */
 466 #define CONFIG_SYS_PCIE3_MEM_VIRT       0xc0000000
 467 #ifdef CONFIG_PHYS_64BIT
 468 #define CONFIG_SYS_PCIE3_MEM_BUS        0xe0000000
 469 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc40000000ull
 470 #else
 471 #define CONFIG_SYS_PCIE3_MEM_BUS        0xc0000000
 472 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc0000000
 473 #endif
 474 #define CONFIG_SYS_PCIE3_MEM_SIZE       0x20000000      /* 512M */
 475 #define CONFIG_SYS_PCIE3_IO_VIRT        0xf8020000
 476 #define CONFIG_SYS_PCIE3_IO_BUS         0x00000000
 477 #ifdef CONFIG_PHYS_64BIT
 478 #define CONFIG_SYS_PCIE3_IO_PHYS        0xff8020000ull
 479 #else
 480 #define CONFIG_SYS_PCIE3_IO_PHYS        0xf8020000
 481 #endif
 482 #define CONFIG_SYS_PCIE3_IO_SIZE        0x00010000      /* 64k */
 483
 484 /* Qman/Bman */
 485 #define CONFIG_SYS_DPAA_QBMAN           /* Support Q/Bman */
 486 #define CONFIG_SYS_BMAN_NUM_PORTALS     10
 487 #define CONFIG_SYS_BMAN_MEM_BASE        0xf4000000
 488 #ifdef CONFIG_PHYS_64BIT
 489 #define CONFIG_SYS_BMAN_MEM_PHYS        0xff4000000ull
 490 #else
 491 #define CONFIG_SYS_BMAN_MEM_PHYS        CONFIG_SYS_BMAN_MEM_BASE
 492 #endif
 493 #define CONFIG_SYS_BMAN_MEM_SIZE        0x00200000
 494 #define CONFIG_SYS_BMAN_SP_CENA_SIZE    0x4000
 495 #define CONFIG_SYS_BMAN_SP_CINH_SIZE    0x1000
 496 #define CONFIG_SYS_BMAN_CENA_BASE       CONFIG_SYS_BMAN_MEM_BASE
 497 #define CONFIG_SYS_BMAN_CENA_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 498 #define CONFIG_SYS_BMAN_CINH_BASE       (CONFIG_SYS_BMAN_MEM_BASE + \
 499                                         CONFIG_SYS_BMAN_CENA_SIZE)
 500 #define CONFIG_SYS_BMAN_CINH_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 501 #define CONFIG_SYS_BMAN_SWP_ISDR_REG    0xE08
 502 #define CONFIG_SYS_QMAN_NUM_PORTALS     10
 503 #define CONFIG_SYS_QMAN_MEM_BASE        0xf4200000
 504 #ifdef CONFIG_PHYS_64BIT
 505 #define CONFIG_SYS_QMAN_MEM_PHYS        0xff4200000ull
 506 #else
 507 #define CONFIG_SYS_QMAN_MEM_PHYS        CONFIG_SYS_QMAN_MEM_BASE
 508 #endif
 509 #define CONFIG_SYS_QMAN_MEM_SIZE        0x00200000
 510 #define CONFIG_SYS_QMAN_SP_CENA_SIZE    0x4000
 511 #define CONFIG_SYS_QMAN_SP_CINH_SIZE    0x1000
 512 #define CONFIG_SYS_QMAN_CENA_BASE       CONFIG_SYS_QMAN_MEM_BASE
 513 #define CONFIG_SYS_QMAN_CENA_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 514 #define CONFIG_SYS_QMAN_CINH_BASE       (CONFIG_SYS_QMAN_MEM_BASE + \
 515                                         CONFIG_SYS_QMAN_CENA_SIZE)
 516 #define CONFIG_SYS_QMAN_CINH_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 517 #define CONFIG_SYS_QMAN_SWP_ISDR_REG    0xE08
 518
 519 #define CONFIG_SYS_DPAA_FMAN
 520 #define CONFIG_SYS_DPAA_PME
 521 /* Default address of microcode for the Linux Fman driver */
 522 #if defined(CONFIG_SPIFLASH)
 523 /*
 524  * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
 525  * env, so we got 0x110000.
 526  */
 527 #define CONFIG_SYS_QE_FW_IN_SPIFLASH
 528 #define CONFIG_SYS_FMAN_FW_ADDR 0x110000
 529 #elif defined(CONFIG_SDCARD)
 530 /*
 531  * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
 532  * about 825KB (1650 blocks), Env is stored after the image, and the env size is
 533  * 0x2000 (16 blocks), 8 + 1650 + 16 = 1674, enlarge it to 1680.
 534  */
 535 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC
 536 #define CONFIG_SYS_FMAN_FW_ADDR (512 * 1680)
 537 #elif defined(CONFIG_NAND)
 538 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND
 539 #define CONFIG_SYS_FMAN_FW_ADDR (8 * CONFIG_SYS_NAND_BLOCK_SIZE)
 540 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
 541 /*
 542  * Slave has no ucode locally, it can fetch this from remote. When implementing
 543  * in two corenet boards, slave's ucode could be stored in master's memory
 544  * space, the address can be mapped from slave TLB->slave LAW->
 545  * slave SRIO or PCIE outbound window->master inbound window->
 546  * master LAW->the ucode address in master's memory space.
 547  */
 548 #define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE
 549 #define CONFIG_SYS_FMAN_FW_ADDR 0xFFE00000
 550 #else
 551 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
 552 #define CONFIG_SYS_FMAN_FW_ADDR 0xEFF00000
 553 #endif
 554 #define CONFIG_SYS_QE_FMAN_FW_LENGTH    0x10000
 555 #define CONFIG_SYS_FDT_PAD              (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 556
 557 #ifdef CONFIG_SYS_DPAA_FMAN
 558 #define CONFIG_FMAN_ENET
 559 #define CONFIG_PHYLIB_10G
 560 #define CONFIG_PHY_VITESSE
 561 #define CONFIG_PHY_TERANETICS
 562 #endif
 563
 564 #ifdef CONFIG_PCI
 565 #define CONFIG_PCI_INDIRECT_BRIDGE
 566 #define CONFIG_PCI_PNP                  /* do pci plug-and-play */
 567 #define CONFIG_E1000
 568
 569 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 570 #define CONFIG_DOS_PARTITION
 571 #endif  /* CONFIG_PCI */
 572
 573 /* SATA */
 574 #define CONFIG_FSL_SATA_V2
 575
 576 #ifdef CONFIG_FSL_SATA_V2
 577 #define CONFIG_FSL_SATA
 578 #define CONFIG_LIBATA
 579
 580 #define CONFIG_SYS_SATA_MAX_DEVICE      2
 581 #define CONFIG_SATA1
 582 #define CONFIG_SYS_SATA1                CONFIG_SYS_MPC85xx_SATA1_ADDR
 583 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
 584 #define CONFIG_SATA2
 585 #define CONFIG_SYS_SATA2                CONFIG_SYS_MPC85xx_SATA2_ADDR
 586 #define CONFIG_SYS_SATA2_FLAGS          FLAGS_DMA
 587
 588 #define CONFIG_LBA48
 589 #define CONFIG_CMD_SATA
 590 #define CONFIG_DOS_PARTITION
 591 #define CONFIG_CMD_EXT2
 592 #endif
 593
 594 #ifdef CONFIG_FMAN_ENET
 595 #define CONFIG_SYS_FM1_DTSEC1_PHY_ADDR  0x2
 596 #define CONFIG_SYS_FM1_DTSEC2_PHY_ADDR  0x3
 597 #define CONFIG_SYS_FM1_DTSEC3_PHY_ADDR  0x4
 598 #define CONFIG_SYS_FM1_DTSEC4_PHY_ADDR  0x1
 599 #define CONFIG_SYS_FM1_DTSEC5_PHY_ADDR  0x0
 600
 601 #define CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR    0x1c
 602 #define CONFIG_SYS_FM1_DTSEC2_RISER_PHY_ADDR    0x1d
 603 #define CONFIG_SYS_FM1_DTSEC3_RISER_PHY_ADDR    0x1e
 604 #define CONFIG_SYS_FM1_DTSEC4_RISER_PHY_ADDR    0x1f
 605
 606 #define CONFIG_SYS_FM1_10GEC1_PHY_ADDR  0
 607
 608 #define CONFIG_SYS_TBIPA_VALUE  8
 609 #define CONFIG_MII              /* MII PHY management */
 610 #define CONFIG_ETHPRIME         "FM1@DTSEC1"
 611 #define CONFIG_PHY_GIGE         /* Include GbE speed/duplex detection */
 612 #endif
 613
 614 /*
 615  * Environment
 616  */
 617 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
 618 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 619
 620 /*
 621  * Command line configuration.
 622  */
 623 #include <config_cmd_default.h>
 624
 625 #define CONFIG_CMD_DHCP
 626 #define CONFIG_CMD_ELF
 627 #define CONFIG_CMD_ERRATA
 628 #define CONFIG_CMD_GREPENV
 629 #define CONFIG_CMD_IRQ
 630 #define CONFIG_CMD_I2C
 631 #define CONFIG_CMD_MII
 632 #define CONFIG_CMD_PING
 633 #define CONFIG_CMD_SETEXPR
 634
 635 #ifdef CONFIG_PCI
 636 #define CONFIG_CMD_PCI
 637 #define CONFIG_CMD_NET
 638 #endif
 639
 640 /*
 641 * USB
 642 */
 643 #define CONFIG_HAS_FSL_DR_USB
 644 #define CONFIG_HAS_FSL_MPH_USB
 645
 646 #if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB)
 647 #define CONFIG_CMD_USB
 648 #define CONFIG_USB_STORAGE
 649 #define CONFIG_USB_EHCI
 650 #define CONFIG_USB_EHCI_FSL
 651 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 652 #endif
 653
 654 #define CONFIG_CMD_EXT2
 655
 656 #define CONFIG_MMC
 657
 658 #ifdef CONFIG_MMC
 659 #define CONFIG_FSL_ESDHC
 660 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 661 #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
 662 #define CONFIG_CMD_MMC
 663 #define CONFIG_GENERIC_MMC
 664 #define CONFIG_CMD_EXT2
 665 #define CONFIG_CMD_FAT
 666 #define CONFIG_DOS_PARTITION
 667 #endif
 668
 669 /* Hash command with SHA acceleration supported in hardware */
 670 #ifdef CONFIG_FSL_CAAM
 671 #define CONFIG_CMD_HASH
 672 #define CONFIG_SHA_HW_ACCEL
 673 #endif
 674
 675 /*
 676  * Miscellaneous configurable options
 677  */
 678 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 679 #define CONFIG_CMDLINE_EDITING                  /* Command-line editing */
 680 #define CONFIG_AUTO_COMPLETE                    /* add autocompletion support */
 681 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 682 #ifdef CONFIG_CMD_KGDB
 683 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size */
 684 #else
 685 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size */
 686 #endif
 687 /* Print Buffer Size */
 688 #define CONFIG_SYS_PBSIZE       (CONFIG_SYS_CBSIZE + \
 689                                 sizeof(CONFIG_SYS_PROMPT)+16)
 690 #define CONFIG_SYS_MAXARGS      16              /* max number of command args */
 691 /* Boot Argument Buffer Size */
 692 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE
 693
 694 /*
 695  * For booting Linux, the board info and command line data
 696  * have to be in the first 64 MB of memory, since this is
 697  * the maximum mapped by the Linux kernel during initialization.
 698  */
 699 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial Memory for Linux */
 700 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 701
 702 #ifdef CONFIG_CMD_KGDB
 703 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 704 #endif
 705
 706 /*
 707  * Environment Configuration
 708  */
 709 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 710 #define CONFIG_BOOTFILE         "uImage"
 711 #define CONFIG_UBOOTPATH        u-boot.bin
 712
 713 /* default location for tftp and bootm */
 714 #define CONFIG_LOADADDR         1000000
 715
 716 #define CONFIG_BOOTDELAY        10      /* -1 disables auto-boot */
 717
 718 #define CONFIG_BAUDRATE 115200
 719
 720 #define __USB_PHY_TYPE  utmi
 721
 722 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 723         "hwconfig=fsl_ddr:ctlr_intlv=cacheline,"                \
 724         "bank_intlv=cs0_cs1\0"                                  \
 725         "netdev=eth0\0"                                         \
 726         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"                     \
 727         "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"             \
 728         "tftpflash=tftpboot $loadaddr $uboot && "               \
 729         "protect off $ubootaddr +$filesize && "                 \
 730         "erase $ubootaddr +$filesize && "                       \
 731         "cp.b $loadaddr $ubootaddr $filesize && "               \
 732         "protect on $ubootaddr +$filesize && "                  \
 733         "cmp.b $loadaddr $ubootaddr $filesize\0"                \
 734         "consoledev=ttyS0\0"                                    \
 735         "usb_phy_type=" __stringify(__USB_PHY_TYPE) "\0"                \
 736         "usb_dr_mode=host\0"                                    \
 737         "ramdiskaddr=2000000\0"                                 \
 738         "ramdiskfile=p2041rdb/ramdisk.uboot\0"                  \
 739         "fdtaddr=c00000\0"                                      \
 740         "fdtfile=p2041rdb/p2041rdb.dtb\0"                       \
 741         "bdev=sda3\0"
 742
 743 #define CONFIG_HDBOOT                                   \
 744         "setenv bootargs root=/dev/$bdev rw "           \
 745         "console=$consoledev,$baudrate $othbootargs;"   \
 746         "tftp $loadaddr $bootfile;"                     \
 747         "tftp $fdtaddr $fdtfile;"                       \
 748         "bootm $loadaddr - $fdtaddr"
 749
 750 #define CONFIG_NFSBOOTCOMMAND                   \
 751         "setenv bootargs root=/dev/nfs rw "     \
 752         "nfsroot=$serverip:$rootpath "          \
 753         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 754         "console=$consoledev,$baudrate $othbootargs;"   \
 755         "tftp $loadaddr $bootfile;"             \
 756         "tftp $fdtaddr $fdtfile;"               \
 757         "bootm $loadaddr - $fdtaddr"
 758
 759 #define CONFIG_RAMBOOTCOMMAND                           \
 760         "setenv bootargs root=/dev/ram rw "             \
 761         "console=$consoledev,$baudrate $othbootargs;"   \
 762         "tftp $ramdiskaddr $ramdiskfile;"               \
 763         "tftp $loadaddr $bootfile;"                     \
 764         "tftp $fdtaddr $fdtfile;"                       \
 765         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 766
 767 #define CONFIG_BOOTCOMMAND              CONFIG_HDBOOT
 768
 769 #include <asm/fsl_secure_boot.h>
 770
 771 #ifdef CONFIG_SECURE_BOOT
 772 #define CONFIG_CMD_BLOB
 773 #endif
 774
 775 #endif  /* __CONFIG_H */