1 /* SPDX-License-Identifier: GPL-2.0+ */
3 * Copyright 2011-2012 Freescale Semiconductor, Inc.
4 * Copyright 2020-2021 NXP
8 * P2041 RDB board configuration file
9 * Also supports P2040 RDB
14 #ifdef CONFIG_RAMBOOT_PBL
15 #define CONFIG_RAMBOOT_TEXT_BASE CONFIG_SYS_TEXT_BASE
16 #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc
19 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
20 /* Set 1M boot space */
21 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_SYS_TEXT_BASE & 0xfff00000)
22 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS \
23 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR)
24 #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc
27 /* High Level Configuration Options */
28 #define CONFIG_SYS_BOOK3E_HV /* Category E.HV supported */
30 #ifndef CONFIG_RESET_VECTOR_ADDRESS
31 #define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc
34 #define CONFIG_SYS_FSL_CPC /* Corenet Platform Cache */
35 #define CONFIG_SYS_NUM_CPC CONFIG_SYS_NUM_DDR_CTLRS
36 #define CONFIG_PCIE1 /* PCIE controller 1 */
37 #define CONFIG_PCIE2 /* PCIE controller 2 */
38 #define CONFIG_PCIE3 /* PCIE controller 3 */
40 #define CONFIG_SYS_SRIO
41 #define CONFIG_SRIO1 /* SRIO port 1 */
42 #define CONFIG_SRIO2 /* SRIO port 2 */
43 #define CONFIG_SRIO_PCIE_BOOT_MASTER
44 #define CONFIG_SYS_DPAA_RMAN /* RMan */
46 #if defined(CONFIG_SPIFLASH)
47 #elif defined(CONFIG_SDCARD)
48 #define CONFIG_FSL_FIXED_MMC_LOCATION
52 #include <linux/stringify.h>
56 * These can be toggled for performance analysis, otherwise use default.
58 #define CONFIG_SYS_CACHE_STASHING
59 #define CONFIG_SYS_INIT_L2CSR0 L2CSR0_L2E
61 #define CONFIG_POST CONFIG_SYS_POST_MEMORY /* test POST memory test */
64 * Config the L3 Cache as L3 SRAM
66 #define CONFIG_SYS_INIT_L3_ADDR CONFIG_RAMBOOT_TEXT_BASE
67 #ifdef CONFIG_PHYS_64BIT
68 #define CONFIG_SYS_INIT_L3_ADDR_PHYS (0xf00000000ull | \
69 CONFIG_RAMBOOT_TEXT_BASE)
71 #define CONFIG_SYS_INIT_L3_ADDR_PHYS CONFIG_SYS_INIT_L3_ADDR
73 #define CONFIG_SYS_L3_SIZE (1024 << 10)
74 #define CONFIG_SYS_INIT_L3_END (CONFIG_SYS_INIT_L3_ADDR + CONFIG_SYS_L3_SIZE)
76 #ifdef CONFIG_PHYS_64BIT
77 #define CONFIG_SYS_DCSRBAR 0xf0000000
78 #define CONFIG_SYS_DCSRBAR_PHYS 0xf00000000ull
82 #define CONFIG_SYS_I2C_EEPROM_NXID
83 #define CONFIG_SYS_EEPROM_BUS_NUM 0
88 #define CONFIG_VERY_BIG_RAM
89 #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000
90 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE
92 #define CONFIG_SYS_SPD_BUS_NUM 0
93 #define SPD_EEPROM_ADDRESS 0x52
94 #define CONFIG_SYS_SDRAM_SIZE 4096 /* for fixed parameter use */
97 * Local Bus Definitions
100 /* Set the local bus clock 1/8 of platform clock */
101 #define CONFIG_SYS_LBC_LCRR LCRR_CLKDIV_8
104 * This board doesn't have a promjet connector.
105 * However, it uses commone corenet board LAW and TLB.
106 * It is necessary to use the same start address with proper offset.
108 #define CONFIG_SYS_FLASH_BASE 0xe0000000
109 #ifdef CONFIG_PHYS_64BIT
110 #define CONFIG_SYS_FLASH_BASE_PHYS 0xfe0000000ull
112 #define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE
115 #define CONFIG_SYS_FLASH_BR_PRELIM \
116 (BR_PHYS_ADDR((CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000)) | \
118 #define CONFIG_SYS_FLASH_OR_PRELIM \
119 ((0xf8000ff7 & ~OR_GPCM_SCY & ~OR_GPCM_EHTR) \
120 | OR_GPCM_SCY_8 | OR_GPCM_EHTR_CLEAR)
122 #define CONFIG_FSL_CPLD
123 #define CPLD_BASE 0xffdf0000 /* CPLD registers */
124 #ifdef CONFIG_PHYS_64BIT
125 #define CPLD_BASE_PHYS 0xfffdf0000ull
127 #define CPLD_BASE_PHYS CPLD_BASE
130 #define PIXIS_LBMAP_SWITCH 7
131 #define PIXIS_LBMAP_MASK 0xf0
132 #define PIXIS_LBMAP_SHIFT 4
133 #define PIXIS_LBMAP_ALTBANK 0x40
135 #define CONFIG_SYS_FLASH_QUIET_TEST
136 #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */
138 #define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */
139 #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Erase Timeout (ms) */
140 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Write Timeout (ms) */
142 #if defined(CONFIG_RAMBOOT_PBL)
143 #define CONFIG_SYS_RAMBOOT
147 #ifdef CONFIG_NAND_FSL_ELBC
148 #define CONFIG_SYS_NAND_BASE 0xffa00000
149 #ifdef CONFIG_PHYS_64BIT
150 #define CONFIG_SYS_NAND_BASE_PHYS 0xfffa00000ull
152 #define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE
155 #define CONFIG_SYS_NAND_BASE_LIST {CONFIG_SYS_NAND_BASE}
156 #define CONFIG_SYS_MAX_NAND_DEVICE 1
158 /* NAND flash config */
159 #define CONFIG_SYS_NAND_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
160 | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \
161 | BR_PS_8 /* Port Size = 8 bit */ \
162 | BR_MS_FCM /* MSEL = FCM */ \
164 #define CONFIG_SYS_NAND_OR_PRELIM (0xFFFC0000 /* length 256K */ \
165 | OR_FCM_PGS /* Large Page*/ \
172 #endif /* CONFIG_NAND_FSL_ELBC */
174 #define CONFIG_SYS_FLASH_EMPTY_INFO
175 #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000}
177 #define CONFIG_HWCONFIG
179 /* define to use L1 as initial stack */
180 #define CONFIG_L1_INIT_RAM
181 #define CONFIG_SYS_INIT_RAM_LOCK
182 #define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 /* Initial L1 address */
183 #ifdef CONFIG_PHYS_64BIT
184 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf
185 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR
186 /* The assembler doesn't like typecast */
187 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
188 ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
189 CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
191 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS CONFIG_SYS_INIT_RAM_ADDR
192 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0
193 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS
195 #define CONFIG_SYS_INIT_RAM_SIZE 0x00004000
197 #define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
199 #define CONFIG_SYS_MONITOR_LEN (768 * 1024)
201 /* Serial Port - controlled on board with jumper J8
205 #define CONFIG_SYS_NS16550_SERIAL
206 #define CONFIG_SYS_NS16550_REG_SIZE 1
207 #define CONFIG_SYS_NS16550_CLK (get_bus_freq(0)/2)
209 #define CONFIG_SYS_BAUDRATE_TABLE \
210 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
212 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
213 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
214 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
215 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
223 #define CONFIG_SYS_SRIO1_MEM_VIRT 0xa0000000
224 #ifdef CONFIG_PHYS_64BIT
225 #define CONFIG_SYS_SRIO1_MEM_PHYS 0xc20000000ull
227 #define CONFIG_SYS_SRIO1_MEM_PHYS 0xa0000000
229 #define CONFIG_SYS_SRIO1_MEM_SIZE 0x10000000 /* 256M */
231 #define CONFIG_SYS_SRIO2_MEM_VIRT 0xb0000000
232 #ifdef CONFIG_PHYS_64BIT
233 #define CONFIG_SYS_SRIO2_MEM_PHYS 0xc30000000ull
235 #define CONFIG_SYS_SRIO2_MEM_PHYS 0xb0000000
237 #define CONFIG_SYS_SRIO2_MEM_SIZE 0x10000000 /* 256M */
240 * for slave u-boot IMAGE instored in master memory space,
241 * PHYS must be aligned based on the SIZE
243 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef200000ull
244 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff00000ull
245 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE 0x100000 /* 1M */
246 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff00000ull
248 * for slave UCODE and ENV instored in master memory space,
249 * PHYS must be aligned based on the SIZE
251 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef100000ull
252 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0x3ffe00000ull
253 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE 0x40000 /* 256K */
255 /* slave core release by master*/
256 #define CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET 0xe00e4
257 #define CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK 0x00000001 /* release core 0 */
260 * SRIO_PCIE_BOOT - SLAVE
262 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
263 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR 0xFFE00000
264 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS \
265 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR)
269 * eSPI - Enhanced SPI
274 * Memory space is mapped 1-1, but I/O space must start from 0.
277 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
278 #define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000
279 #define CONFIG_SYS_PCIE1_MEM_PHYS 0xc00000000ull
280 #define CONFIG_SYS_PCIE1_IO_VIRT 0xf8000000
281 #define CONFIG_SYS_PCIE1_IO_PHYS 0xff8000000ull
283 /* controller 2, Slot 2, tgtid 2, Base address 201000 */
284 #define CONFIG_SYS_PCIE2_MEM_VIRT 0xa0000000
285 #define CONFIG_SYS_PCIE2_MEM_PHYS 0xc20000000ull
286 #define CONFIG_SYS_PCIE2_IO_VIRT 0xf8010000
287 #define CONFIG_SYS_PCIE2_IO_PHYS 0xff8010000ull
289 /* controller 3, Slot 1, tgtid 1, Base address 202000 */
290 #define CONFIG_SYS_PCIE3_MEM_VIRT 0xc0000000
291 #define CONFIG_SYS_PCIE3_MEM_PHYS 0xc40000000ull
292 #define CONFIG_SYS_PCIE3_IO_VIRT 0xf8020000
293 #define CONFIG_SYS_PCIE3_IO_PHYS 0xff8020000ull
296 #define CONFIG_SYS_BMAN_NUM_PORTALS 10
297 #define CONFIG_SYS_BMAN_MEM_BASE 0xf4000000
298 #ifdef CONFIG_PHYS_64BIT
299 #define CONFIG_SYS_BMAN_MEM_PHYS 0xff4000000ull
301 #define CONFIG_SYS_BMAN_MEM_PHYS CONFIG_SYS_BMAN_MEM_BASE
303 #define CONFIG_SYS_BMAN_MEM_SIZE 0x00200000
304 #define CONFIG_SYS_BMAN_SP_CENA_SIZE 0x4000
305 #define CONFIG_SYS_BMAN_SP_CINH_SIZE 0x1000
306 #define CONFIG_SYS_BMAN_CENA_BASE CONFIG_SYS_BMAN_MEM_BASE
307 #define CONFIG_SYS_BMAN_CENA_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
308 #define CONFIG_SYS_BMAN_CINH_BASE (CONFIG_SYS_BMAN_MEM_BASE + \
309 CONFIG_SYS_BMAN_CENA_SIZE)
310 #define CONFIG_SYS_BMAN_CINH_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
311 #define CONFIG_SYS_BMAN_SWP_ISDR_REG 0xE08
312 #define CONFIG_SYS_QMAN_NUM_PORTALS 10
313 #define CONFIG_SYS_QMAN_MEM_BASE 0xf4200000
314 #ifdef CONFIG_PHYS_64BIT
315 #define CONFIG_SYS_QMAN_MEM_PHYS 0xff4200000ull
317 #define CONFIG_SYS_QMAN_MEM_PHYS CONFIG_SYS_QMAN_MEM_BASE
319 #define CONFIG_SYS_QMAN_MEM_SIZE 0x00200000
320 #define CONFIG_SYS_QMAN_SP_CENA_SIZE 0x4000
321 #define CONFIG_SYS_QMAN_SP_CINH_SIZE 0x1000
322 #define CONFIG_SYS_QMAN_CENA_BASE CONFIG_SYS_QMAN_MEM_BASE
323 #define CONFIG_SYS_QMAN_CENA_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
324 #define CONFIG_SYS_QMAN_CINH_BASE (CONFIG_SYS_QMAN_MEM_BASE + \
325 CONFIG_SYS_QMAN_CENA_SIZE)
326 #define CONFIG_SYS_QMAN_CINH_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
327 #define CONFIG_SYS_QMAN_SWP_ISDR_REG 0xE08
329 #define CONFIG_SYS_DPAA_FMAN
330 #define CONFIG_SYS_DPAA_PME
331 #define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
334 #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
335 #endif /* CONFIG_PCI */
337 #ifdef CONFIG_FMAN_ENET
338 #define CONFIG_SYS_FM1_DTSEC1_PHY_ADDR 0x2
339 #define CONFIG_SYS_FM1_DTSEC2_PHY_ADDR 0x3
340 #define CONFIG_SYS_FM1_DTSEC3_PHY_ADDR 0x4
341 #define CONFIG_SYS_FM1_DTSEC4_PHY_ADDR 0x1
342 #define CONFIG_SYS_FM1_DTSEC5_PHY_ADDR 0x0
344 #define CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR 0x1c
345 #define CONFIG_SYS_FM1_DTSEC2_RISER_PHY_ADDR 0x1d
346 #define CONFIG_SYS_FM1_DTSEC3_RISER_PHY_ADDR 0x1e
347 #define CONFIG_SYS_FM1_DTSEC4_RISER_PHY_ADDR 0x1f
349 #define CONFIG_SYS_FM1_10GEC1_PHY_ADDR 0
351 #define CONFIG_SYS_TBIPA_VALUE 8
357 #define CONFIG_LOADS_ECHO /* echo on for serial download */
358 #define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */
361 #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR
362 #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
366 * Miscellaneous configurable options
370 * For booting Linux, the board info and command line data
371 * have to be in the first 64 MB of memory, since this is
372 * the maximum mapped by the Linux kernel during initialization.
374 #define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory for Linux */
375 #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */
378 * Environment Configuration
380 #define CONFIG_ROOTPATH "/opt/nfsroot"
381 #define CONFIG_UBOOTPATH u-boot.bin
383 #define __USB_PHY_TYPE utmi
385 #define CONFIG_EXTRA_ENV_SETTINGS \
386 "hwconfig=fsl_ddr:ctlr_intlv=cacheline," \
387 "bank_intlv=cs0_cs1\0" \
389 "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \
390 "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0" \
391 "tftpflash=tftpboot $loadaddr $uboot && " \
392 "protect off $ubootaddr +$filesize && " \
393 "erase $ubootaddr +$filesize && " \
394 "cp.b $loadaddr $ubootaddr $filesize && " \
395 "protect on $ubootaddr +$filesize && " \
396 "cmp.b $loadaddr $ubootaddr $filesize\0" \
397 "consoledev=ttyS0\0" \
398 "usb_phy_type=" __stringify(__USB_PHY_TYPE) "\0" \
399 "usb_dr_mode=host\0" \
400 "ramdiskaddr=2000000\0" \
401 "ramdiskfile=p2041rdb/ramdisk.uboot\0" \
402 "fdtaddr=1e00000\0" \
403 "fdtfile=p2041rdb/p2041rdb.dtb\0" \
406 #include <asm/fsl_secure_boot.h>
408 #endif /* __CONFIG_H */