include/configs/P2041RDB.h

   1 /*
   2  * Copyright 2011-2012 Freescale Semiconductor, Inc.
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 /*
   8  * P2041 RDB board configuration file
   9  * Also supports P2040 RDB
  10  */
  11 #ifndef __CONFIG_H
  12 #define __CONFIG_H
  13
  14 #ifdef CONFIG_RAMBOOT_PBL
  15 #define CONFIG_RAMBOOT_TEXT_BASE        CONFIG_SYS_TEXT_BASE
  16 #define CONFIG_RESET_VECTOR_ADDRESS     0xfffffffc
  17 #define CONFIG_SYS_FSL_PBL_PBI board/freescale/corenet_ds/pbi.cfg
  18 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/corenet_ds/rcw_p2041rdb.cfg
  19 #endif
  20
  21 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
  22 /* Set 1M boot space */
  23 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_SYS_TEXT_BASE & 0xfff00000)
  24 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS \
  25                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR)
  26 #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc
  27 #define CONFIG_SYS_NO_FLASH
  28 #endif
  29
  30 /* High Level Configuration Options */
  31 #define CONFIG_SYS_BOOK3E_HV            /* Category E.HV supported */
  32 #define CONFIG_MP                       /* support multiple processors */
  33
  34 #ifndef CONFIG_SYS_TEXT_BASE
  35 #define CONFIG_SYS_TEXT_BASE    0xeff40000
  36 #endif
  37
  38 #ifndef CONFIG_RESET_VECTOR_ADDRESS
  39 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
  40 #endif
  41
  42 #define CONFIG_SYS_FSL_CPC              /* Corenet Platform Cache */
  43 #define CONFIG_SYS_NUM_CPC              CONFIG_SYS_NUM_DDR_CTLRS
  44 #define CONFIG_FSL_CAAM                 /* Enable SEC/CAAM */
  45 #define CONFIG_PCIE1                    /* PCIE controller 1 */
  46 #define CONFIG_PCIE2                    /* PCIE controller 2 */
  47 #define CONFIG_PCIE3                    /* PCIE controller 3 */
  48 #define CONFIG_FSL_PCI_INIT             /* Use common FSL init code */
  49 #define CONFIG_SYS_PCI_64BIT            /* enable 64-bit PCI resources */
  50
  51 #define CONFIG_SYS_SRIO
  52 #define CONFIG_SRIO1                    /* SRIO port 1 */
  53 #define CONFIG_SRIO2                    /* SRIO port 2 */
  54 #define CONFIG_SRIO_PCIE_BOOT_MASTER
  55 #define CONFIG_SYS_DPAA_RMAN            /* RMan */
  56
  57 #define CONFIG_ENV_OVERWRITE
  58
  59 #ifdef CONFIG_SYS_NO_FLASH
  60 #if !defined(CONFIG_RAMBOOT_PBL) && !defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
  61 #define CONFIG_ENV_IS_NOWHERE
  62 #endif
  63 #else
  64 #define CONFIG_FLASH_CFI_DRIVER
  65 #define CONFIG_SYS_FLASH_CFI
  66 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
  67 #endif
  68
  69 #if defined(CONFIG_SPIFLASH)
  70         #define CONFIG_SYS_EXTRA_ENV_RELOC
  71         #define CONFIG_ENV_IS_IN_SPI_FLASH
  72         #define CONFIG_ENV_SPI_BUS              0
  73         #define CONFIG_ENV_SPI_CS               0
  74         #define CONFIG_ENV_SPI_MAX_HZ           10000000
  75         #define CONFIG_ENV_SPI_MODE             0
  76         #define CONFIG_ENV_SIZE                 0x2000          /* 8KB */
  77         #define CONFIG_ENV_OFFSET               0x100000        /* 1MB */
  78         #define CONFIG_ENV_SECT_SIZE            0x10000
  79 #elif defined(CONFIG_SDCARD)
  80         #define CONFIG_SYS_EXTRA_ENV_RELOC
  81         #define CONFIG_ENV_IS_IN_MMC
  82         #define CONFIG_FSL_FIXED_MMC_LOCATION
  83         #define CONFIG_SYS_MMC_ENV_DEV          0
  84         #define CONFIG_ENV_SIZE                 0x2000
  85         #define CONFIG_ENV_OFFSET               (512 * 1658)
  86 #elif defined(CONFIG_NAND)
  87 #define CONFIG_SYS_EXTRA_ENV_RELOC
  88 #define CONFIG_ENV_IS_IN_NAND
  89 #define CONFIG_ENV_SIZE                 CONFIG_SYS_NAND_BLOCK_SIZE
  90 #define CONFIG_ENV_OFFSET               (7 * CONFIG_SYS_NAND_BLOCK_SIZE)
  91 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
  92 #define CONFIG_ENV_IS_IN_REMOTE
  93 #define CONFIG_ENV_ADDR         0xffe20000
  94 #define CONFIG_ENV_SIZE         0x2000
  95 #elif defined(CONFIG_ENV_IS_NOWHERE)
  96 #define CONFIG_ENV_SIZE         0x2000
  97 #else
  98         #define CONFIG_ENV_IS_IN_FLASH
  99         #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE \
 100                         - CONFIG_ENV_SECT_SIZE)
 101         #define CONFIG_ENV_SIZE         0x2000
 102         #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
 103 #endif
 104
 105 #ifndef __ASSEMBLY__
 106 unsigned long get_board_sys_clk(unsigned long dummy);
 107 #endif
 108 #define CONFIG_SYS_CLK_FREQ     get_board_sys_clk(0)
 109
 110 /*
 111  * These can be toggled for performance analysis, otherwise use default.
 112  */
 113 #define CONFIG_SYS_CACHE_STASHING
 114 #define CONFIG_BACKSIDE_L2_CACHE
 115 #define CONFIG_SYS_INIT_L2CSR0          L2CSR0_L2E
 116 #define CONFIG_BTB                      /* toggle branch predition */
 117
 118 #define CONFIG_ENABLE_36BIT_PHYS
 119
 120 #ifdef CONFIG_PHYS_64BIT
 121 #define CONFIG_ADDR_MAP
 122 #define CONFIG_SYS_NUM_ADDR_MAP         64      /* number of TLB1 entries */
 123 #endif
 124
 125 #define CONFIG_POST CONFIG_SYS_POST_MEMORY      /* test POST memory test */
 126 #define CONFIG_SYS_MEMTEST_START        0x00200000      /* memtest works on */
 127 #define CONFIG_SYS_MEMTEST_END          0x00400000
 128 #define CONFIG_SYS_ALT_MEMTEST
 129 #define CONFIG_PANIC_HANG       /* do not reset board on panic */
 130
 131 /*
 132  *  Config the L3 Cache as L3 SRAM
 133  */
 134 #define CONFIG_SYS_INIT_L3_ADDR         CONFIG_RAMBOOT_TEXT_BASE
 135 #ifdef CONFIG_PHYS_64BIT
 136 #define CONFIG_SYS_INIT_L3_ADDR_PHYS    (0xf00000000ull | \
 137                 CONFIG_RAMBOOT_TEXT_BASE)
 138 #else
 139 #define CONFIG_SYS_INIT_L3_ADDR_PHYS    CONFIG_SYS_INIT_L3_ADDR
 140 #endif
 141 #define CONFIG_SYS_L3_SIZE              (1024 << 10)
 142 #define CONFIG_SYS_INIT_L3_END (CONFIG_SYS_INIT_L3_ADDR + CONFIG_SYS_L3_SIZE)
 143
 144 #ifdef CONFIG_PHYS_64BIT
 145 #define CONFIG_SYS_DCSRBAR              0xf0000000
 146 #define CONFIG_SYS_DCSRBAR_PHYS         0xf00000000ull
 147 #endif
 148
 149 /* EEPROM */
 150 #define CONFIG_ID_EEPROM
 151 #define CONFIG_SYS_I2C_EEPROM_NXID
 152 #define CONFIG_SYS_EEPROM_BUS_NUM       0
 153 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x50
 154 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  1
 155
 156 /*
 157  * DDR Setup
 158  */
 159 #define CONFIG_VERY_BIG_RAM
 160 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 161 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 162
 163 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 164 #define CONFIG_CHIP_SELECTS_PER_CTRL    (4 * CONFIG_DIMM_SLOTS_PER_CTLR)
 165
 166 #define CONFIG_DDR_SPD
 167
 168 #define CONFIG_SYS_SPD_BUS_NUM  0
 169 #define SPD_EEPROM_ADDRESS      0x52
 170 #define CONFIG_SYS_SDRAM_SIZE   4096    /* for fixed parameter use */
 171
 172 /*
 173  * Local Bus Definitions
 174  */
 175
 176 /* Set the local bus clock 1/8 of platform clock */
 177 #define CONFIG_SYS_LBC_LCRR             LCRR_CLKDIV_8
 178
 179 /*
 180  * This board doesn't have a promjet connector.
 181  * However, it uses commone corenet board LAW and TLB.
 182  * It is necessary to use the same start address with proper offset.
 183  */
 184 #define CONFIG_SYS_FLASH_BASE           0xe0000000
 185 #ifdef CONFIG_PHYS_64BIT
 186 #define CONFIG_SYS_FLASH_BASE_PHYS      0xfe0000000ull
 187 #else
 188 #define CONFIG_SYS_FLASH_BASE_PHYS      CONFIG_SYS_FLASH_BASE
 189 #endif
 190
 191 #define CONFIG_SYS_FLASH_BR_PRELIM \
 192                 (BR_PHYS_ADDR((CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000)) | \
 193                 BR_PS_16 | BR_V)
 194 #define CONFIG_SYS_FLASH_OR_PRELIM \
 195                 ((0xf8000ff7 & ~OR_GPCM_SCY & ~OR_GPCM_EHTR) \
 196                  | OR_GPCM_SCY_8 | OR_GPCM_EHTR_CLEAR)
 197
 198 #define CONFIG_FSL_CPLD
 199 #define CPLD_BASE               0xffdf0000      /* CPLD registers */
 200 #ifdef CONFIG_PHYS_64BIT
 201 #define CPLD_BASE_PHYS          0xfffdf0000ull
 202 #else
 203 #define CPLD_BASE_PHYS          CPLD_BASE
 204 #endif
 205
 206 #define CONFIG_SYS_BR3_PRELIM   (BR_PHYS_ADDR(CPLD_BASE_PHYS) | BR_PS_8 | BR_V)
 207 #define CONFIG_SYS_OR3_PRELIM   0xffffeff7      /* 32KB but only 4k mapped */
 208
 209 #define PIXIS_LBMAP_SWITCH      7
 210 #define PIXIS_LBMAP_MASK        0xf0
 211 #define PIXIS_LBMAP_SHIFT       4
 212 #define PIXIS_LBMAP_ALTBANK     0x40
 213
 214 #define CONFIG_SYS_FLASH_QUIET_TEST
 215 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
 216
 217 #define CONFIG_SYS_MAX_FLASH_BANKS      1               /* number of banks */
 218 #define CONFIG_SYS_MAX_FLASH_SECT       1024            /* sectors per device */
 219 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000           /* Erase Timeout (ms) */
 220 #define CONFIG_SYS_FLASH_WRITE_TOUT     500             /* Write Timeout (ms) */
 221
 222 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_TEXT_BASE
 223
 224 #if defined(CONFIG_RAMBOOT_PBL)
 225 #define CONFIG_SYS_RAMBOOT
 226 #endif
 227
 228 #define CONFIG_NAND_FSL_ELBC
 229 /* Nand Flash */
 230 #ifdef CONFIG_NAND_FSL_ELBC
 231 #define CONFIG_SYS_NAND_BASE            0xffa00000
 232 #ifdef CONFIG_PHYS_64BIT
 233 #define CONFIG_SYS_NAND_BASE_PHYS       0xfffa00000ull
 234 #else
 235 #define CONFIG_SYS_NAND_BASE_PHYS       CONFIG_SYS_NAND_BASE
 236 #endif
 237
 238 #define CONFIG_SYS_NAND_BASE_LIST     {CONFIG_SYS_NAND_BASE}
 239 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 240 #define CONFIG_CMD_NAND
 241 #define CONFIG_SYS_NAND_BLOCK_SIZE    (128 * 1024)
 242
 243 /* NAND flash config */
 244 #define CONFIG_SYS_NAND_BR_PRELIM  (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 245                                | (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \
 246                                | BR_PS_8               /* Port Size = 8 bit */ \
 247                                | BR_MS_FCM             /* MSEL = FCM */ \
 248                                | BR_V)                 /* valid */
 249 #define CONFIG_SYS_NAND_OR_PRELIM  (0xFFFC0000        /* length 256K */ \
 250                                | OR_FCM_PGS            /* Large Page*/ \
 251                                | OR_FCM_CSCT \
 252                                | OR_FCM_CST \
 253                                | OR_FCM_CHT \
 254                                | OR_FCM_SCY_1 \
 255                                | OR_FCM_TRLX \
 256                                | OR_FCM_EHTR)
 257
 258 #ifdef CONFIG_NAND
 259 #define CONFIG_SYS_BR0_PRELIM  CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */
 260 #define CONFIG_SYS_OR0_PRELIM  CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
 261 #define CONFIG_SYS_BR1_PRELIM  CONFIG_SYS_FLASH_BR_PRELIM /* NOR Base Address */
 262 #define CONFIG_SYS_OR1_PRELIM  CONFIG_SYS_FLASH_OR_PRELIM /* NOR Options */
 263 #else
 264 #define CONFIG_SYS_BR0_PRELIM  CONFIG_SYS_FLASH_BR_PRELIM /* NOR Base Address */
 265 #define CONFIG_SYS_OR0_PRELIM  CONFIG_SYS_FLASH_OR_PRELIM /* NOR Options */
 266 #define CONFIG_SYS_BR1_PRELIM  CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */
 267 #define CONFIG_SYS_OR1_PRELIM  CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
 268 #endif
 269 #else
 270 #define CONFIG_SYS_BR0_PRELIM  CONFIG_SYS_FLASH_BR_PRELIM /* NOR Base Address */
 271 #define CONFIG_SYS_OR0_PRELIM  CONFIG_SYS_FLASH_OR_PRELIM /* NOR Options */
 272 #endif /* CONFIG_NAND_FSL_ELBC */
 273
 274 #define CONFIG_SYS_FLASH_EMPTY_INFO
 275 #define CONFIG_SYS_FLASH_AMD_CHECK_DQ7
 276 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000}
 277
 278 #define CONFIG_BOARD_EARLY_INIT_R       /* call board_early_init_r function */
 279 #define CONFIG_MISC_INIT_R
 280
 281 #define CONFIG_HWCONFIG
 282
 283 /* define to use L1 as initial stack */
 284 #define CONFIG_L1_INIT_RAM
 285 #define CONFIG_SYS_INIT_RAM_LOCK
 286 #define CONFIG_SYS_INIT_RAM_ADDR        0xffd00000      /* Initial L1 address */
 287 #ifdef CONFIG_PHYS_64BIT
 288 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf
 289 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR
 290 /* The assembler doesn't like typecast */
 291 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
 292         ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
 293           CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
 294 #else
 295 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS   CONFIG_SYS_INIT_RAM_ADDR
 296 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0
 297 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS
 298 #endif
 299 #define CONFIG_SYS_INIT_RAM_SIZE        0x00004000
 300
 301 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - \
 302                                         GENERATED_GBL_DATA_SIZE)
 303 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 304
 305 #define CONFIG_SYS_MONITOR_LEN          (768 * 1024)
 306 #define CONFIG_SYS_MALLOC_LEN           (1024 * 1024)
 307
 308 /* Serial Port - controlled on board with jumper J8
 309  * open - index 2
 310  * shorted - index 1
 311  */
 312 #define CONFIG_CONS_INDEX       1
 313 #define CONFIG_SYS_NS16550_SERIAL
 314 #define CONFIG_SYS_NS16550_REG_SIZE     1
 315 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
 316
 317 #define CONFIG_SYS_BAUDRATE_TABLE       \
 318         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 319
 320 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
 321 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
 322 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
 323 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
 324
 325 /* I2C */
 326 #define CONFIG_SYS_I2C
 327 #define CONFIG_SYS_I2C_FSL
 328 #define CONFIG_SYS_FSL_I2C_SPEED        400000
 329 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 330 #define CONFIG_SYS_FSL_I2C_OFFSET       0x118000
 331 #define CONFIG_SYS_FSL_I2C2_SPEED       400000
 332 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
 333 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x118100
 334
 335 /*
 336  * RapidIO
 337  */
 338 #define CONFIG_SYS_SRIO1_MEM_VIRT       0xa0000000
 339 #ifdef CONFIG_PHYS_64BIT
 340 #define CONFIG_SYS_SRIO1_MEM_PHYS       0xc20000000ull
 341 #else
 342 #define CONFIG_SYS_SRIO1_MEM_PHYS       0xa0000000
 343 #endif
 344 #define CONFIG_SYS_SRIO1_MEM_SIZE       0x10000000      /* 256M */
 345
 346 #define CONFIG_SYS_SRIO2_MEM_VIRT       0xb0000000
 347 #ifdef CONFIG_PHYS_64BIT
 348 #define CONFIG_SYS_SRIO2_MEM_PHYS       0xc30000000ull
 349 #else
 350 #define CONFIG_SYS_SRIO2_MEM_PHYS       0xb0000000
 351 #endif
 352 #define CONFIG_SYS_SRIO2_MEM_SIZE       0x10000000      /* 256M */
 353
 354 /*
 355  * for slave u-boot IMAGE instored in master memory space,
 356  * PHYS must be aligned based on the SIZE
 357  */
 358 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef200000ull
 359 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff00000ull
 360 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE 0x100000       /* 1M */
 361 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff00000ull
 362 /*
 363  * for slave UCODE and ENV instored in master memory space,
 364  * PHYS must be aligned based on the SIZE
 365  */
 366 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef100000ull
 367 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0x3ffe00000ull
 368 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE 0x40000    /* 256K */
 369
 370 /* slave core release by master*/
 371 #define CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET 0xe00e4
 372 #define CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK 0x00000001 /* release core 0 */
 373
 374 /*
 375  * SRIO_PCIE_BOOT - SLAVE
 376  */
 377 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
 378 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR 0xFFE00000
 379 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS \
 380                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR)
 381 #endif
 382
 383 /*
 384  * eSPI - Enhanced SPI
 385  */
 386 #define CONFIG_SF_DEFAULT_SPEED         10000000
 387 #define CONFIG_SF_DEFAULT_MODE          0
 388
 389 /*
 390  * General PCI
 391  * Memory space is mapped 1-1, but I/O space must start from 0.
 392  */
 393
 394 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
 395 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
 396 #ifdef CONFIG_PHYS_64BIT
 397 #define CONFIG_SYS_PCIE1_MEM_BUS        0xe0000000
 398 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
 399 #else
 400 #define CONFIG_SYS_PCIE1_MEM_BUS        0x80000000
 401 #define CONFIG_SYS_PCIE1_MEM_PHYS       0x80000000
 402 #endif
 403 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x20000000      /* 512M */
 404 #define CONFIG_SYS_PCIE1_IO_VIRT        0xf8000000
 405 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 406 #ifdef CONFIG_PHYS_64BIT
 407 #define CONFIG_SYS_PCIE1_IO_PHYS        0xff8000000ull
 408 #else
 409 #define CONFIG_SYS_PCIE1_IO_PHYS        0xf8000000
 410 #endif
 411 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 412
 413 /* controller 2, Slot 2, tgtid 2, Base address 201000 */
 414 #define CONFIG_SYS_PCIE2_MEM_VIRT       0xa0000000
 415 #ifdef CONFIG_PHYS_64BIT
 416 #define CONFIG_SYS_PCIE2_MEM_BUS        0xe0000000
 417 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc20000000ull
 418 #else
 419 #define CONFIG_SYS_PCIE2_MEM_BUS        0xa0000000
 420 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xa0000000
 421 #endif
 422 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x20000000      /* 512M */
 423 #define CONFIG_SYS_PCIE2_IO_VIRT        0xf8010000
 424 #define CONFIG_SYS_PCIE2_IO_BUS         0x00000000
 425 #ifdef CONFIG_PHYS_64BIT
 426 #define CONFIG_SYS_PCIE2_IO_PHYS        0xff8010000ull
 427 #else
 428 #define CONFIG_SYS_PCIE2_IO_PHYS        0xf8010000
 429 #endif
 430 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00010000      /* 64k */
 431
 432 /* controller 3, Slot 1, tgtid 1, Base address 202000 */
 433 #define CONFIG_SYS_PCIE3_MEM_VIRT       0xc0000000
 434 #ifdef CONFIG_PHYS_64BIT
 435 #define CONFIG_SYS_PCIE3_MEM_BUS        0xe0000000
 436 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc40000000ull
 437 #else
 438 #define CONFIG_SYS_PCIE3_MEM_BUS        0xc0000000
 439 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc0000000
 440 #endif
 441 #define CONFIG_SYS_PCIE3_MEM_SIZE       0x20000000      /* 512M */
 442 #define CONFIG_SYS_PCIE3_IO_VIRT        0xf8020000
 443 #define CONFIG_SYS_PCIE3_IO_BUS         0x00000000
 444 #ifdef CONFIG_PHYS_64BIT
 445 #define CONFIG_SYS_PCIE3_IO_PHYS        0xff8020000ull
 446 #else
 447 #define CONFIG_SYS_PCIE3_IO_PHYS        0xf8020000
 448 #endif
 449 #define CONFIG_SYS_PCIE3_IO_SIZE        0x00010000      /* 64k */
 450
 451 /* Qman/Bman */
 452 #define CONFIG_SYS_DPAA_QBMAN           /* Support Q/Bman */
 453 #define CONFIG_SYS_BMAN_NUM_PORTALS     10
 454 #define CONFIG_SYS_BMAN_MEM_BASE        0xf4000000
 455 #ifdef CONFIG_PHYS_64BIT
 456 #define CONFIG_SYS_BMAN_MEM_PHYS        0xff4000000ull
 457 #else
 458 #define CONFIG_SYS_BMAN_MEM_PHYS        CONFIG_SYS_BMAN_MEM_BASE
 459 #endif
 460 #define CONFIG_SYS_BMAN_MEM_SIZE        0x00200000
 461 #define CONFIG_SYS_BMAN_SP_CENA_SIZE    0x4000
 462 #define CONFIG_SYS_BMAN_SP_CINH_SIZE    0x1000
 463 #define CONFIG_SYS_BMAN_CENA_BASE       CONFIG_SYS_BMAN_MEM_BASE
 464 #define CONFIG_SYS_BMAN_CENA_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 465 #define CONFIG_SYS_BMAN_CINH_BASE       (CONFIG_SYS_BMAN_MEM_BASE + \
 466                                         CONFIG_SYS_BMAN_CENA_SIZE)
 467 #define CONFIG_SYS_BMAN_CINH_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 468 #define CONFIG_SYS_BMAN_SWP_ISDR_REG    0xE08
 469 #define CONFIG_SYS_QMAN_NUM_PORTALS     10
 470 #define CONFIG_SYS_QMAN_MEM_BASE        0xf4200000
 471 #ifdef CONFIG_PHYS_64BIT
 472 #define CONFIG_SYS_QMAN_MEM_PHYS        0xff4200000ull
 473 #else
 474 #define CONFIG_SYS_QMAN_MEM_PHYS        CONFIG_SYS_QMAN_MEM_BASE
 475 #endif
 476 #define CONFIG_SYS_QMAN_MEM_SIZE        0x00200000
 477 #define CONFIG_SYS_QMAN_SP_CENA_SIZE    0x4000
 478 #define CONFIG_SYS_QMAN_SP_CINH_SIZE    0x1000
 479 #define CONFIG_SYS_QMAN_CENA_BASE       CONFIG_SYS_QMAN_MEM_BASE
 480 #define CONFIG_SYS_QMAN_CENA_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 481 #define CONFIG_SYS_QMAN_CINH_BASE       (CONFIG_SYS_QMAN_MEM_BASE + \
 482                                         CONFIG_SYS_QMAN_CENA_SIZE)
 483 #define CONFIG_SYS_QMAN_CINH_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 484 #define CONFIG_SYS_QMAN_SWP_ISDR_REG    0xE08
 485
 486 #define CONFIG_SYS_DPAA_FMAN
 487 #define CONFIG_SYS_DPAA_PME
 488 /* Default address of microcode for the Linux Fman driver */
 489 #if defined(CONFIG_SPIFLASH)
 490 /*
 491  * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
 492  * env, so we got 0x110000.
 493  */
 494 #define CONFIG_SYS_QE_FW_IN_SPIFLASH
 495 #define CONFIG_SYS_FMAN_FW_ADDR 0x110000
 496 #elif defined(CONFIG_SDCARD)
 497 /*
 498  * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
 499  * about 825KB (1650 blocks), Env is stored after the image, and the env size is
 500  * 0x2000 (16 blocks), 8 + 1650 + 16 = 1674, enlarge it to 1680.
 501  */
 502 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC
 503 #define CONFIG_SYS_FMAN_FW_ADDR (512 * 1680)
 504 #elif defined(CONFIG_NAND)
 505 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND
 506 #define CONFIG_SYS_FMAN_FW_ADDR (8 * CONFIG_SYS_NAND_BLOCK_SIZE)
 507 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
 508 /*
 509  * Slave has no ucode locally, it can fetch this from remote. When implementing
 510  * in two corenet boards, slave's ucode could be stored in master's memory
 511  * space, the address can be mapped from slave TLB->slave LAW->
 512  * slave SRIO or PCIE outbound window->master inbound window->
 513  * master LAW->the ucode address in master's memory space.
 514  */
 515 #define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE
 516 #define CONFIG_SYS_FMAN_FW_ADDR 0xFFE00000
 517 #else
 518 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
 519 #define CONFIG_SYS_FMAN_FW_ADDR 0xEFF00000
 520 #endif
 521 #define CONFIG_SYS_QE_FMAN_FW_LENGTH    0x10000
 522 #define CONFIG_SYS_FDT_PAD              (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 523
 524 #ifdef CONFIG_SYS_DPAA_FMAN
 525 #define CONFIG_FMAN_ENET
 526 #define CONFIG_PHYLIB_10G
 527 #define CONFIG_PHY_VITESSE
 528 #define CONFIG_PHY_TERANETICS
 529 #endif
 530
 531 #ifdef CONFIG_PCI
 532 #define CONFIG_PCI_INDIRECT_BRIDGE
 533
 534 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 535 #endif  /* CONFIG_PCI */
 536
 537 /* SATA */
 538 #define CONFIG_FSL_SATA_V2
 539
 540 #ifdef CONFIG_FSL_SATA_V2
 541 #define CONFIG_FSL_SATA
 542 #define CONFIG_LIBATA
 543
 544 #define CONFIG_SYS_SATA_MAX_DEVICE      2
 545 #define CONFIG_SATA1
 546 #define CONFIG_SYS_SATA1                CONFIG_SYS_MPC85xx_SATA1_ADDR
 547 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
 548 #define CONFIG_SATA2
 549 #define CONFIG_SYS_SATA2                CONFIG_SYS_MPC85xx_SATA2_ADDR
 550 #define CONFIG_SYS_SATA2_FLAGS          FLAGS_DMA
 551
 552 #define CONFIG_LBA48
 553 #define CONFIG_CMD_SATA
 554 #endif
 555
 556 #ifdef CONFIG_FMAN_ENET
 557 #define CONFIG_SYS_FM1_DTSEC1_PHY_ADDR  0x2
 558 #define CONFIG_SYS_FM1_DTSEC2_PHY_ADDR  0x3
 559 #define CONFIG_SYS_FM1_DTSEC3_PHY_ADDR  0x4
 560 #define CONFIG_SYS_FM1_DTSEC4_PHY_ADDR  0x1
 561 #define CONFIG_SYS_FM1_DTSEC5_PHY_ADDR  0x0
 562
 563 #define CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR    0x1c
 564 #define CONFIG_SYS_FM1_DTSEC2_RISER_PHY_ADDR    0x1d
 565 #define CONFIG_SYS_FM1_DTSEC3_RISER_PHY_ADDR    0x1e
 566 #define CONFIG_SYS_FM1_DTSEC4_RISER_PHY_ADDR    0x1f
 567
 568 #define CONFIG_SYS_FM1_10GEC1_PHY_ADDR  0
 569
 570 #define CONFIG_SYS_TBIPA_VALUE  8
 571 #define CONFIG_MII              /* MII PHY management */
 572 #define CONFIG_ETHPRIME         "FM1@DTSEC1"
 573 #define CONFIG_PHY_GIGE         /* Include GbE speed/duplex detection */
 574 #endif
 575
 576 /*
 577  * Environment
 578  */
 579 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
 580 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 581
 582 /*
 583  * Command line configuration.
 584  */
 585 #define CONFIG_CMD_ERRATA
 586 #define CONFIG_CMD_IRQ
 587
 588 #ifdef CONFIG_PCI
 589 #define CONFIG_CMD_PCI
 590 #endif
 591
 592 /*
 593 * USB
 594 */
 595 #define CONFIG_HAS_FSL_DR_USB
 596 #define CONFIG_HAS_FSL_MPH_USB
 597
 598 #if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB)
 599 #define CONFIG_USB_EHCI
 600 #define CONFIG_USB_EHCI_FSL
 601 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 602 #endif
 603
 604 #ifdef CONFIG_MMC
 605 #define CONFIG_FSL_ESDHC
 606 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 607 #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
 608 #endif
 609
 610 /* Hash command with SHA acceleration supported in hardware */
 611 #ifdef CONFIG_FSL_CAAM
 612 #define CONFIG_CMD_HASH
 613 #define CONFIG_SHA_HW_ACCEL
 614 #endif
 615
 616 /*
 617  * Miscellaneous configurable options
 618  */
 619 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 620 #define CONFIG_CMDLINE_EDITING                  /* Command-line editing */
 621 #define CONFIG_AUTO_COMPLETE                    /* add autocompletion support */
 622 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 623 #ifdef CONFIG_CMD_KGDB
 624 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size */
 625 #else
 626 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size */
 627 #endif
 628 /* Print Buffer Size */
 629 #define CONFIG_SYS_PBSIZE       (CONFIG_SYS_CBSIZE + \
 630                                 sizeof(CONFIG_SYS_PROMPT)+16)
 631 #define CONFIG_SYS_MAXARGS      16              /* max number of command args */
 632 /* Boot Argument Buffer Size */
 633 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE
 634
 635 /*
 636  * For booting Linux, the board info and command line data
 637  * have to be in the first 64 MB of memory, since this is
 638  * the maximum mapped by the Linux kernel during initialization.
 639  */
 640 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial Memory for Linux */
 641 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 642
 643 #ifdef CONFIG_CMD_KGDB
 644 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 645 #endif
 646
 647 /*
 648  * Environment Configuration
 649  */
 650 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 651 #define CONFIG_BOOTFILE         "uImage"
 652 #define CONFIG_UBOOTPATH        u-boot.bin
 653
 654 /* default location for tftp and bootm */
 655 #define CONFIG_LOADADDR         1000000
 656
 657
 658 #define CONFIG_BAUDRATE 115200
 659
 660 #define __USB_PHY_TYPE  utmi
 661
 662 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 663         "hwconfig=fsl_ddr:ctlr_intlv=cacheline,"                \
 664         "bank_intlv=cs0_cs1\0"                                  \
 665         "netdev=eth0\0"                                         \
 666         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"                     \
 667         "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"             \
 668         "tftpflash=tftpboot $loadaddr $uboot && "               \
 669         "protect off $ubootaddr +$filesize && "                 \
 670         "erase $ubootaddr +$filesize && "                       \
 671         "cp.b $loadaddr $ubootaddr $filesize && "               \
 672         "protect on $ubootaddr +$filesize && "                  \
 673         "cmp.b $loadaddr $ubootaddr $filesize\0"                \
 674         "consoledev=ttyS0\0"                                    \
 675         "usb_phy_type=" __stringify(__USB_PHY_TYPE) "\0"                \
 676         "usb_dr_mode=host\0"                                    \
 677         "ramdiskaddr=2000000\0"                                 \
 678         "ramdiskfile=p2041rdb/ramdisk.uboot\0"                  \
 679         "fdtaddr=1e00000\0"                                     \
 680         "fdtfile=p2041rdb/p2041rdb.dtb\0"                       \
 681         "bdev=sda3\0"
 682
 683 #define CONFIG_HDBOOT                                   \
 684         "setenv bootargs root=/dev/$bdev rw "           \
 685         "console=$consoledev,$baudrate $othbootargs;"   \
 686         "tftp $loadaddr $bootfile;"                     \
 687         "tftp $fdtaddr $fdtfile;"                       \
 688         "bootm $loadaddr - $fdtaddr"
 689
 690 #define CONFIG_NFSBOOTCOMMAND                   \
 691         "setenv bootargs root=/dev/nfs rw "     \
 692         "nfsroot=$serverip:$rootpath "          \
 693         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 694         "console=$consoledev,$baudrate $othbootargs;"   \
 695         "tftp $loadaddr $bootfile;"             \
 696         "tftp $fdtaddr $fdtfile;"               \
 697         "bootm $loadaddr - $fdtaddr"
 698
 699 #define CONFIG_RAMBOOTCOMMAND                           \
 700         "setenv bootargs root=/dev/ram rw "             \
 701         "console=$consoledev,$baudrate $othbootargs;"   \
 702         "tftp $ramdiskaddr $ramdiskfile;"               \
 703         "tftp $loadaddr $bootfile;"                     \
 704         "tftp $fdtaddr $fdtfile;"                       \
 705         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 706
 707 #define CONFIG_BOOTCOMMAND              CONFIG_HDBOOT
 708
 709 #include <asm/fsl_secure_boot.h>
 710
 711 #endif  /* __CONFIG_H */