include/configs/P2041RDB.h

   1 /*
   2  * Copyright 2011 Freescale Semiconductor, Inc.
   3  *
   4  * See file CREDITS for list of people who contributed to this
   5  * project.
   6  *
   7  * This program is free software; you can redistribute it and/or
   8  * modify it under the terms of the GNU General Public License as
   9  * published by the Free Software Foundation; either version 2 of
  10  * the License, or (at your option) any later version.
  11  *
  12  * This program is distributed in the hope that it will be useful,
  13  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  15  * GNU General Public License for more details.
  16  *
  17  * You should have received a copy of the GNU General Public License
  18  * along with this program; if not, write to the Free Software
  19  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  20  * MA 02111-1307 USA
  21  */
  22
  23 /*
  24  * P2041 RDB board configuration file
  25  *
  26  */
  27 #ifndef __CONFIG_H
  28 #define __CONFIG_H
  29
  30 #define CONFIG_P2041RDB
  31 #define CONFIG_PHYS_64BIT
  32 #define CONFIG_PPC_P2041
  33
  34 #ifdef CONFIG_RAMBOOT_PBL
  35 #define CONFIG_RAMBOOT_TEXT_BASE        CONFIG_SYS_TEXT_BASE
  36 #define CONFIG_RESET_VECTOR_ADDRESS     0xfffffffc
  37 #endif
  38
  39 /* High Level Configuration Options */
  40 #define CONFIG_BOOKE
  41 #define CONFIG_E500                     /* BOOKE e500 family */
  42 #define CONFIG_E500MC                   /* BOOKE e500mc family */
  43 #define CONFIG_SYS_BOOK3E_HV            /* Category E.HV supported */
  44 #define CONFIG_MPC85xx                  /* MPC85xx/PQ3 platform */
  45 #define CONFIG_FSL_CORENET              /* Freescale CoreNet platform */
  46 #define CONFIG_MP                       /* support multiple processors */
  47
  48 #ifndef CONFIG_SYS_TEXT_BASE
  49 #define CONFIG_SYS_TEXT_BASE    0xeff80000
  50 #endif
  51
  52 #ifndef CONFIG_RESET_VECTOR_ADDRESS
  53 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
  54 #endif
  55
  56 #define CONFIG_SYS_FSL_CPC              /* Corenet Platform Cache */
  57 #define CONFIG_SYS_NUM_CPC              CONFIG_NUM_DDR_CONTROLLERS
  58 #define CONFIG_FSL_ELBC                 /* Has Enhanced localbus controller */
  59 #define CONFIG_PCI                      /* Enable PCI/PCIE */
  60 #define CONFIG_PCIE1                    /* PCIE controler 1 */
  61 #define CONFIG_PCIE2                    /* PCIE controler 2 */
  62 #define CONFIG_PCIE3                    /* PCIE controler 3 */
  63 #define CONFIG_FSL_PCI_INIT             /* Use common FSL init code */
  64 #define CONFIG_SYS_PCI_64BIT            /* enable 64-bit PCI resources */
  65
  66 #define CONFIG_SYS_SRIO
  67 #define CONFIG_SRIO1                    /* SRIO port 1 */
  68 #define CONFIG_SRIO2                    /* SRIO port 2 */
  69 #define CONFIG_SYS_DPAA_RMAN            /* RMan */
  70
  71 #define CONFIG_FSL_LAW                  /* Use common FSL init code */
  72
  73 #define CONFIG_ENV_OVERWRITE
  74
  75 #ifdef CONFIG_SYS_NO_FLASH
  76 #define CONFIG_ENV_IS_NOWHERE
  77 #else
  78 #define CONFIG_FLASH_CFI_DRIVER
  79 #define CONFIG_SYS_FLASH_CFI
  80 #endif
  81
  82 #if defined(CONFIG_SPIFLASH)
  83         #define CONFIG_SYS_EXTRA_ENV_RELOC
  84         #define CONFIG_ENV_IS_IN_SPI_FLASH
  85         #define CONFIG_ENV_SPI_BUS              0
  86         #define CONFIG_ENV_SPI_CS               0
  87         #define CONFIG_ENV_SPI_MAX_HZ           10000000
  88         #define CONFIG_ENV_SPI_MODE             0
  89         #define CONFIG_ENV_SIZE                 0x2000          /* 8KB */
  90         #define CONFIG_ENV_OFFSET               0x100000        /* 1MB */
  91         #define CONFIG_ENV_SECT_SIZE            0x10000
  92 #elif defined(CONFIG_SDCARD)
  93         #define CONFIG_SYS_EXTRA_ENV_RELOC
  94         #define CONFIG_ENV_IS_IN_MMC
  95         #define CONFIG_FSL_FIXED_MMC_LOCATION
  96         #define CONFIG_SYS_MMC_ENV_DEV          0
  97         #define CONFIG_ENV_SIZE                 0x2000
  98         #define CONFIG_ENV_OFFSET               (512 * 1097)
  99 #elif defined(CONFIG_NAND)
 100 #define CONFIG_SYS_EXTRA_ENV_RELOC
 101 #define CONFIG_ENV_IS_IN_NAND
 102 #define CONFIG_ENV_SIZE                 CONFIG_SYS_NAND_BLOCK_SIZE
 103 #define CONFIG_ENV_OFFSET               (5 * CONFIG_SYS_NAND_BLOCK_SIZE)
 104 #else
 105         #define CONFIG_ENV_IS_IN_FLASH
 106         #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE \
 107                         - CONFIG_ENV_SECT_SIZE)
 108         #define CONFIG_ENV_SIZE         0x2000
 109         #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
 110 #endif
 111
 112 #ifndef __ASSEMBLY__
 113 unsigned long get_board_sys_clk(unsigned long dummy);
 114 #endif
 115 #define CONFIG_SYS_CLK_FREQ     get_board_sys_clk(0)
 116
 117 /*
 118  * These can be toggled for performance analysis, otherwise use default.
 119  */
 120 #define CONFIG_SYS_CACHE_STASHING
 121 #define CONFIG_BACKSIDE_L2_CACHE
 122 #define CONFIG_SYS_INIT_L2CSR0          L2CSR0_L2E
 123 #define CONFIG_BTB                      /* toggle branch predition */
 124
 125 #define CONFIG_ENABLE_36BIT_PHYS
 126
 127 #ifdef CONFIG_PHYS_64BIT
 128 #define CONFIG_ADDR_MAP
 129 #define CONFIG_SYS_NUM_ADDR_MAP         64      /* number of TLB1 entries */
 130 #endif
 131
 132 #define CONFIG_POST CONFIG_SYS_POST_MEMORY      /* test POST memory test */
 133 #define CONFIG_SYS_MEMTEST_START        0x00200000      /* memtest works on */
 134 #define CONFIG_SYS_MEMTEST_END          0x00400000
 135 #define CONFIG_SYS_ALT_MEMTEST
 136 #define CONFIG_PANIC_HANG       /* do not reset board on panic */
 137
 138 /*
 139  *  Config the L3 Cache as L3 SRAM
 140  */
 141 #define CONFIG_SYS_INIT_L3_ADDR         CONFIG_RAMBOOT_TEXT_BASE
 142 #ifdef CONFIG_PHYS_64BIT
 143 #define CONFIG_SYS_INIT_L3_ADDR_PHYS    (0xf00000000ull | \
 144                 CONFIG_RAMBOOT_TEXT_BASE)
 145 #else
 146 #define CONFIG_SYS_INIT_L3_ADDR_PHYS    CONFIG_SYS_INIT_L3_ADDR
 147 #endif
 148 #define CONFIG_SYS_L3_SIZE              (1024 << 10)
 149 #define CONFIG_SYS_INIT_L3_END (CONFIG_SYS_INIT_L3_ADDR + CONFIG_SYS_L3_SIZE)
 150
 151 #ifdef CONFIG_PHYS_64BIT
 152 #define CONFIG_SYS_DCSRBAR              0xf0000000
 153 #define CONFIG_SYS_DCSRBAR_PHYS         0xf00000000ull
 154 #endif
 155
 156 /* EEPROM */
 157 #define CONFIG_ID_EEPROM
 158 #define CONFIG_SYS_I2C_EEPROM_NXID
 159 #define CONFIG_SYS_EEPROM_BUS_NUM       0
 160 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x50
 161 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  1
 162
 163 /*
 164  * DDR Setup
 165  */
 166 #define CONFIG_VERY_BIG_RAM
 167 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 168 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 169
 170 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 171 #define CONFIG_CHIP_SELECTS_PER_CTRL    (4 * CONFIG_DIMM_SLOTS_PER_CTLR)
 172
 173 #define CONFIG_DDR_SPD
 174 #define CONFIG_FSL_DDR3
 175
 176 #define CONFIG_SYS_SPD_BUS_NUM  0
 177 #define SPD_EEPROM_ADDRESS      0x52
 178 #define CONFIG_SYS_SDRAM_SIZE   4096    /* for fixed parameter use */
 179
 180 /*
 181  * Local Bus Definitions
 182  */
 183
 184 /* Set the local bus clock 1/8 of platform clock */
 185 #define CONFIG_SYS_LBC_LCRR             LCRR_CLKDIV_8
 186
 187 #define CONFIG_SYS_FLASH_BASE           0xe8000000      /* Start of PromJet */
 188 #ifdef CONFIG_PHYS_64BIT
 189 #define CONFIG_SYS_FLASH_BASE_PHYS      0xfe8000000ull
 190 #else
 191 #define CONFIG_SYS_FLASH_BASE_PHYS      CONFIG_SYS_FLASH_BASE
 192 #endif
 193
 194 #define CONFIG_SYS_FLASH_BR_PRELIM \
 195                 (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | BR_PS_16 | BR_V)
 196 #define CONFIG_SYS_FLASH_OR_PRELIM \
 197                 ((0xf8000ff7 & ~OR_GPCM_SCY & ~OR_GPCM_EHTR) \
 198                  | OR_GPCM_SCY_8 | OR_GPCM_EHTR_CLEAR)
 199
 200 #define CONFIG_FSL_CPLD
 201 #define CPLD_BASE               0xffdf0000      /* CPLD registers */
 202 #ifdef CONFIG_PHYS_64BIT
 203 #define CPLD_BASE_PHYS          0xfffdf0000ull
 204 #else
 205 #define CPLD_BASE_PHYS          CPLD_BASE
 206 #endif
 207
 208 #define CONFIG_SYS_BR3_PRELIM   (BR_PHYS_ADDR(CPLD_BASE_PHYS) | BR_PS_8 | BR_V)
 209 #define CONFIG_SYS_OR3_PRELIM   0xffffeff7      /* 32KB but only 4k mapped */
 210
 211 #define PIXIS_LBMAP_SWITCH      7
 212 #define PIXIS_LBMAP_MASK        0xf0
 213 #define PIXIS_LBMAP_SHIFT       4
 214 #define PIXIS_LBMAP_ALTBANK     0x40
 215
 216 #define CONFIG_SYS_FLASH_QUIET_TEST
 217 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
 218
 219 #define CONFIG_SYS_MAX_FLASH_BANKS      1               /* number of banks */
 220 #define CONFIG_SYS_MAX_FLASH_SECT       1024            /* sectors per device */
 221 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000           /* Erase Timeout (ms) */
 222 #define CONFIG_SYS_FLASH_WRITE_TOUT     500             /* Write Timeout (ms) */
 223
 224 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_TEXT_BASE
 225
 226 #if defined(CONFIG_RAMBOOT_PBL)
 227 #define CONFIG_SYS_RAMBOOT
 228 #endif
 229
 230 #define CONFIG_NAND_FSL_ELBC
 231 /* Nand Flash */
 232 #ifdef CONFIG_NAND_FSL_ELBC
 233 #define CONFIG_SYS_NAND_BASE            0xffa00000
 234 #ifdef CONFIG_PHYS_64BIT
 235 #define CONFIG_SYS_NAND_BASE_PHYS       0xfffa00000ull
 236 #else
 237 #define CONFIG_SYS_NAND_BASE_PHYS       CONFIG_SYS_NAND_BASE
 238 #endif
 239
 240 #define CONFIG_SYS_NAND_BASE_LIST     {CONFIG_SYS_NAND_BASE}
 241 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 242 #define CONFIG_MTD_NAND_VERIFY_WRITE
 243 #define CONFIG_CMD_NAND
 244 #define CONFIG_SYS_NAND_BLOCK_SIZE    (128 * 1024)
 245
 246 /* NAND flash config */
 247 #define CONFIG_SYS_NAND_BR_PRELIM  (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 248                                | (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \
 249                                | BR_PS_8               /* Port Size = 8 bit */ \
 250                                | BR_MS_FCM             /* MSEL = FCM */ \
 251                                | BR_V)                 /* valid */
 252 #define CONFIG_SYS_NAND_OR_PRELIM  (0xFFFC0000        /* length 256K */ \
 253                                | OR_FCM_PGS            /* Large Page*/ \
 254                                | OR_FCM_CSCT \
 255                                | OR_FCM_CST \
 256                                | OR_FCM_CHT \
 257                                | OR_FCM_SCY_1 \
 258                                | OR_FCM_TRLX \
 259                                | OR_FCM_EHTR)
 260
 261 #ifdef CONFIG_NAND
 262 #define CONFIG_SYS_BR0_PRELIM  CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */
 263 #define CONFIG_SYS_OR0_PRELIM  CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
 264 #define CONFIG_SYS_BR1_PRELIM  CONFIG_SYS_FLASH_BR_PRELIM /* NOR Base Address */
 265 #define CONFIG_SYS_OR1_PRELIM  CONFIG_SYS_FLASH_OR_PRELIM /* NOR Options */
 266 #else
 267 #define CONFIG_SYS_BR0_PRELIM  CONFIG_SYS_FLASH_BR_PRELIM /* NOR Base Address */
 268 #define CONFIG_SYS_OR0_PRELIM  CONFIG_SYS_FLASH_OR_PRELIM /* NOR Options */
 269 #define CONFIG_SYS_BR1_PRELIM  CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */
 270 #define CONFIG_SYS_OR1_PRELIM  CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
 271 #endif
 272 #else
 273 #define CONFIG_SYS_BR0_PRELIM  CONFIG_SYS_FLASH_BR_PRELIM /* NOR Base Address */
 274 #define CONFIG_SYS_OR0_PRELIM  CONFIG_SYS_FLASH_OR_PRELIM /* NOR Options */
 275 #endif /* CONFIG_NAND_FSL_ELBC */
 276
 277 #define CONFIG_SYS_FLASH_EMPTY_INFO
 278 #define CONFIG_SYS_FLASH_AMD_CHECK_DQ7
 279 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS}
 280
 281 #define CONFIG_BOARD_EARLY_INIT_F
 282 #define CONFIG_BOARD_EARLY_INIT_R       /* call board_early_init_r function */
 283 #define CONFIG_MISC_INIT_R
 284
 285 #define CONFIG_HWCONFIG
 286
 287 /* define to use L1 as initial stack */
 288 #define CONFIG_L1_INIT_RAM
 289 #define CONFIG_SYS_INIT_RAM_LOCK
 290 #define CONFIG_SYS_INIT_RAM_ADDR        0xffd00000      /* Initial L1 address */
 291 #ifdef CONFIG_PHYS_64BIT
 292 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf
 293 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR
 294 /* The assembler doesn't like typecast */
 295 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
 296         ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
 297           CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
 298 #else
 299 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS   CONFIG_SYS_INIT_RAM_ADDR
 300 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0
 301 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS
 302 #endif
 303 #define CONFIG_SYS_INIT_RAM_SIZE        0x00004000
 304
 305 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - \
 306                                         GENERATED_GBL_DATA_SIZE)
 307 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 308
 309 #define CONFIG_SYS_MONITOR_LEN          (512 * 1024)
 310 #define CONFIG_SYS_MALLOC_LEN           (1024 * 1024)
 311
 312 /* Serial Port - controlled on board with jumper J8
 313  * open - index 2
 314  * shorted - index 1
 315  */
 316 #define CONFIG_CONS_INDEX       1
 317 #define CONFIG_SYS_NS16550
 318 #define CONFIG_SYS_NS16550_SERIAL
 319 #define CONFIG_SYS_NS16550_REG_SIZE     1
 320 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
 321
 322 #define CONFIG_SYS_BAUDRATE_TABLE       \
 323         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 324
 325 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
 326 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
 327 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
 328 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
 329
 330 /* Use the HUSH parser */
 331 #define CONFIG_SYS_HUSH_PARSER
 332
 333 /* pass open firmware flat tree */
 334 #define CONFIG_OF_LIBFDT
 335 #define CONFIG_OF_BOARD_SETUP
 336 #define CONFIG_OF_STDOUT_VIA_ALIAS
 337
 338 /* new uImage format support */
 339 #define CONFIG_FIT
 340 #define CONFIG_FIT_VERBOSE      /* enable fit_format_{error,warning}() */
 341
 342 /* I2C */
 343 #define CONFIG_FSL_I2C          /* Use FSL common I2C driver */
 344 #define CONFIG_HARD_I2C         /* I2C with hardware support */
 345 #define CONFIG_I2C_MULTI_BUS
 346 #define CONFIG_I2C_CMD_TREE
 347 #define CONFIG_SYS_I2C_SPEED            400000
 348 #define CONFIG_SYS_I2C_SLAVE            0x7F
 349 #define CONFIG_SYS_I2C_OFFSET           0x118000
 350 #define CONFIG_SYS_I2C2_OFFSET          0x118100
 351
 352 /*
 353  * RapidIO
 354  */
 355 #define CONFIG_SYS_SRIO1_MEM_VIRT       0xa0000000
 356 #ifdef CONFIG_PHYS_64BIT
 357 #define CONFIG_SYS_SRIO1_MEM_PHYS       0xc20000000ull
 358 #else
 359 #define CONFIG_SYS_SRIO1_MEM_PHYS       0xa0000000
 360 #endif
 361 #define CONFIG_SYS_SRIO1_MEM_SIZE       0x10000000      /* 256M */
 362
 363 #define CONFIG_SYS_SRIO2_MEM_VIRT       0xb0000000
 364 #ifdef CONFIG_PHYS_64BIT
 365 #define CONFIG_SYS_SRIO2_MEM_PHYS       0xc30000000ull
 366 #else
 367 #define CONFIG_SYS_SRIO2_MEM_PHYS       0xb0000000
 368 #endif
 369 #define CONFIG_SYS_SRIO2_MEM_SIZE       0x10000000      /* 256M */
 370
 371 /*
 372  * eSPI - Enhanced SPI
 373  */
 374 #define CONFIG_FSL_ESPI
 375 #define CONFIG_SPI_FLASH
 376 #define CONFIG_SPI_FLASH_SPANSION
 377 #define CONFIG_CMD_SF
 378 #define CONFIG_SF_DEFAULT_SPEED         10000000
 379 #define CONFIG_SF_DEFAULT_MODE          0
 380
 381 /*
 382  * General PCI
 383  * Memory space is mapped 1-1, but I/O space must start from 0.
 384  */
 385
 386 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
 387 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
 388 #ifdef CONFIG_PHYS_64BIT
 389 #define CONFIG_SYS_PCIE1_MEM_BUS        0xe0000000
 390 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
 391 #else
 392 #define CONFIG_SYS_PCIE1_MEM_BUS        0x80000000
 393 #define CONFIG_SYS_PCIE1_MEM_PHYS       0x80000000
 394 #endif
 395 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x20000000      /* 512M */
 396 #define CONFIG_SYS_PCIE1_IO_VIRT        0xf8000000
 397 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 398 #ifdef CONFIG_PHYS_64BIT
 399 #define CONFIG_SYS_PCIE1_IO_PHYS        0xff8000000ull
 400 #else
 401 #define CONFIG_SYS_PCIE1_IO_PHYS        0xf8000000
 402 #endif
 403 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 404
 405 /* controller 2, Slot 2, tgtid 2, Base address 201000 */
 406 #define CONFIG_SYS_PCIE2_MEM_VIRT       0xa0000000
 407 #ifdef CONFIG_PHYS_64BIT
 408 #define CONFIG_SYS_PCIE2_MEM_BUS        0xe0000000
 409 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc20000000ull
 410 #else
 411 #define CONFIG_SYS_PCIE2_MEM_BUS        0xa0000000
 412 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xa0000000
 413 #endif
 414 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x20000000      /* 512M */
 415 #define CONFIG_SYS_PCIE2_IO_VIRT        0xf8010000
 416 #define CONFIG_SYS_PCIE2_IO_BUS         0x00000000
 417 #ifdef CONFIG_PHYS_64BIT
 418 #define CONFIG_SYS_PCIE2_IO_PHYS        0xff8010000ull
 419 #else
 420 #define CONFIG_SYS_PCIE2_IO_PHYS        0xf8010000
 421 #endif
 422 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00010000      /* 64k */
 423
 424 /* controller 3, Slot 1, tgtid 1, Base address 202000 */
 425 #define CONFIG_SYS_PCIE3_MEM_VIRT       0xc0000000
 426 #ifdef CONFIG_PHYS_64BIT
 427 #define CONFIG_SYS_PCIE3_MEM_BUS        0xe0000000
 428 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc40000000ull
 429 #else
 430 #define CONFIG_SYS_PCIE3_MEM_BUS        0xc0000000
 431 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc0000000
 432 #endif
 433 #define CONFIG_SYS_PCIE3_MEM_SIZE       0x20000000      /* 512M */
 434 #define CONFIG_SYS_PCIE3_IO_VIRT        0xf8020000
 435 #define CONFIG_SYS_PCIE3_IO_BUS         0x00000000
 436 #ifdef CONFIG_PHYS_64BIT
 437 #define CONFIG_SYS_PCIE3_IO_PHYS        0xff8020000ull
 438 #else
 439 #define CONFIG_SYS_PCIE3_IO_PHYS        0xf8020000
 440 #endif
 441 #define CONFIG_SYS_PCIE3_IO_SIZE        0x00010000      /* 64k */
 442
 443 /* Qman/Bman */
 444 #define CONFIG_SYS_DPAA_QBMAN           /* Support Q/Bman */
 445 #define CONFIG_SYS_BMAN_NUM_PORTALS     10
 446 #define CONFIG_SYS_BMAN_MEM_BASE        0xf4000000
 447 #ifdef CONFIG_PHYS_64BIT
 448 #define CONFIG_SYS_BMAN_MEM_PHYS        0xff4000000ull
 449 #else
 450 #define CONFIG_SYS_BMAN_MEM_PHYS        CONFIG_SYS_BMAN_MEM_BASE
 451 #endif
 452 #define CONFIG_SYS_BMAN_MEM_SIZE        0x00200000
 453 #define CONFIG_SYS_QMAN_NUM_PORTALS     10
 454 #define CONFIG_SYS_QMAN_MEM_BASE        0xf4200000
 455 #ifdef CONFIG_PHYS_64BIT
 456 #define CONFIG_SYS_QMAN_MEM_PHYS        0xff4200000ull
 457 #else
 458 #define CONFIG_SYS_QMAN_MEM_PHYS        CONFIG_SYS_QMAN_MEM_BASE
 459 #endif
 460 #define CONFIG_SYS_QMAN_MEM_SIZE        0x00200000
 461
 462 #define CONFIG_SYS_DPAA_FMAN
 463 #define CONFIG_SYS_DPAA_PME
 464 /* Default address of microcode for the Linux Fman driver */
 465 #if defined(CONFIG_SPIFLASH)
 466 /*
 467  * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
 468  * env, so we got 0x110000.
 469  */
 470 #define CONFIG_SYS_QE_FW_IN_SPIFLASH
 471 #define CONFIG_SYS_QE_FMAN_FW_ADDR      0x110000
 472 #elif defined(CONFIG_SDCARD)
 473 /*
 474  * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
 475  * about 545KB (1089 blocks), Env is stored after the image, and the env size is
 476  * 0x2000 (16 blocks), 8 + 1089 + 16 = 1113, enlarge it to 1130.
 477  */
 478 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC
 479 #define CONFIG_SYS_QE_FMAN_FW_ADDR      (512 * 1130)
 480 #elif defined(CONFIG_NAND)
 481 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND
 482 #define CONFIG_SYS_QE_FMAN_FW_ADDR      (6 * CONFIG_SYS_NAND_BLOCK_SIZE)
 483 #else
 484 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
 485 #define CONFIG_SYS_QE_FMAN_FW_ADDR      0xEF000000
 486 #endif
 487 #define CONFIG_SYS_QE_FMAN_FW_LENGTH    0x10000
 488 #define CONFIG_SYS_FDT_PAD              (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 489
 490 #ifdef CONFIG_SYS_DPAA_FMAN
 491 #define CONFIG_FMAN_ENET
 492 #define CONFIG_PHYLIB_10G
 493 #define CONFIG_PHY_VITESSE
 494 #define CONFIG_PHY_TERANETICS
 495 #endif
 496
 497 #ifdef CONFIG_PCI
 498 #define CONFIG_PCI_PNP                  /* do pci plug-and-play */
 499 #define CONFIG_E1000
 500
 501 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 502 #define CONFIG_DOS_PARTITION
 503 #endif  /* CONFIG_PCI */
 504
 505 /* SATA */
 506 #define CONFIG_FSL_SATA
 507 #ifdef CONFIG_FSL_SATA
 508 #define CONFIG_LIBATA
 509
 510 #define CONFIG_SYS_SATA_MAX_DEVICE      2
 511 #define CONFIG_SATA1
 512 #define CONFIG_SYS_SATA1                CONFIG_SYS_MPC85xx_SATA1_ADDR
 513 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
 514 #define CONFIG_SATA2
 515 #define CONFIG_SYS_SATA2                CONFIG_SYS_MPC85xx_SATA2_ADDR
 516 #define CONFIG_SYS_SATA2_FLAGS          FLAGS_DMA
 517
 518 #define CONFIG_LBA48
 519 #define CONFIG_CMD_SATA
 520 #define CONFIG_DOS_PARTITION
 521 #define CONFIG_CMD_EXT2
 522 #endif
 523
 524 #ifdef CONFIG_FMAN_ENET
 525 #define CONFIG_SYS_FM1_DTSEC1_PHY_ADDR  0x2
 526 #define CONFIG_SYS_FM1_DTSEC2_PHY_ADDR  0x3
 527 #define CONFIG_SYS_FM1_DTSEC3_PHY_ADDR  0x4
 528 #define CONFIG_SYS_FM1_DTSEC4_PHY_ADDR  0x1
 529 #define CONFIG_SYS_FM1_DTSEC5_PHY_ADDR  0x0
 530
 531 #define CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR    0x1c
 532 #define CONFIG_SYS_FM1_DTSEC2_RISER_PHY_ADDR    0x1d
 533 #define CONFIG_SYS_FM1_DTSEC3_RISER_PHY_ADDR    0x1e
 534 #define CONFIG_SYS_FM1_DTSEC4_RISER_PHY_ADDR    0x1f
 535
 536 #define CONFIG_SYS_FM1_10GEC1_PHY_ADDR  0
 537
 538 #define CONFIG_SYS_TBIPA_VALUE  8
 539 #define CONFIG_MII              /* MII PHY management */
 540 #define CONFIG_ETHPRIME         "FM1@DTSEC1"
 541 #define CONFIG_PHY_GIGE         /* Include GbE speed/duplex detection */
 542 #endif
 543
 544 /*
 545  * Environment
 546  */
 547 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
 548 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 549
 550 /*
 551  * Command line configuration.
 552  */
 553 #include <config_cmd_default.h>
 554
 555 #define CONFIG_CMD_DHCP
 556 #define CONFIG_CMD_ELF
 557 #define CONFIG_CMD_ERRATA
 558 #define CONFIG_CMD_GREPENV
 559 #define CONFIG_CMD_IRQ
 560 #define CONFIG_CMD_I2C
 561 #define CONFIG_CMD_MII
 562 #define CONFIG_CMD_PING
 563 #define CONFIG_CMD_SETEXPR
 564
 565 #ifdef CONFIG_PCI
 566 #define CONFIG_CMD_PCI
 567 #define CONFIG_CMD_NET
 568 #endif
 569
 570 /*
 571 * USB
 572 */
 573 #define CONFIG_CMD_USB
 574 #define CONFIG_USB_STORAGE
 575 #define CONFIG_USB_EHCI
 576 #define CONFIG_USB_EHCI_FSL
 577 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 578 #define CONFIG_CMD_EXT2
 579
 580 #define CONFIG_MMC
 581
 582 #ifdef CONFIG_MMC
 583 #define CONFIG_FSL_ESDHC
 584 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 585 #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
 586 #define CONFIG_CMD_MMC
 587 #define CONFIG_GENERIC_MMC
 588 #define CONFIG_CMD_EXT2
 589 #define CONFIG_CMD_FAT
 590 #define CONFIG_DOS_PARTITION
 591 #endif
 592
 593 /*
 594  * Miscellaneous configurable options
 595  */
 596 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 597 #define CONFIG_CMDLINE_EDITING                  /* Command-line editing */
 598 #define CONFIG_AUTO_COMPLETE                    /* add autocompletion support */
 599 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 600 #define CONFIG_SYS_PROMPT       "=> "           /* Monitor Command Prompt */
 601 #ifdef CONFIG_CMD_KGDB
 602 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size */
 603 #else
 604 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size */
 605 #endif
 606 /* Print Buffer Size */
 607 #define CONFIG_SYS_PBSIZE       (CONFIG_SYS_CBSIZE + \
 608                                 sizeof(CONFIG_SYS_PROMPT)+16)
 609 #define CONFIG_SYS_MAXARGS      16              /* max number of command args */
 610 /* Boot Argument Buffer Size */
 611 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE
 612 #define CONFIG_SYS_HZ           1000            /* decrementer freq 1ms ticks */
 613
 614 /*
 615  * For booting Linux, the board info and command line data
 616  * have to be in the first 64 MB of memory, since this is
 617  * the maximum mapped by the Linux kernel during initialization.
 618  */
 619 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial Memory for Linux */
 620 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 621
 622 #ifdef CONFIG_CMD_KGDB
 623 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 624 #define CONFIG_KGDB_SER_INDEX   2       /* which serial port to use */
 625 #endif
 626
 627 /*
 628  * Environment Configuration
 629  */
 630 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 631 #define CONFIG_BOOTFILE         "uImage"
 632 #define CONFIG_UBOOTPATH        u-boot.bin
 633
 634 /* default location for tftp and bootm */
 635 #define CONFIG_LOADADDR         1000000
 636
 637 #define CONFIG_BOOTDELAY        10      /* -1 disables auto-boot */
 638
 639 #define CONFIG_BAUDRATE 115200
 640
 641 #define __USB_PHY_TYPE  utmi
 642
 643 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 644         "hwconfig=fsl_ddr:ctlr_intlv=cacheline,"                \
 645         "bank_intlv=cs0_cs1\0"                                  \
 646         "netdev=eth0\0"                                         \
 647         "uboot=" MK_STR(CONFIG_UBOOTPATH) "\0"                  \
 648         "ubootaddr=" MK_STR(CONFIG_SYS_TEXT_BASE) "\0"          \
 649         "tftpflash=tftpboot $loadaddr $uboot && "               \
 650         "protect off $ubootaddr +$filesize && "                 \
 651         "erase $ubootaddr +$filesize && "                       \
 652         "cp.b $loadaddr $ubootaddr $filesize && "               \
 653         "protect on $ubootaddr +$filesize && "                  \
 654         "cmp.b $loadaddr $ubootaddr $filesize\0"                \
 655         "consoledev=ttyS0\0"                                    \
 656         "usb_phy_type=" MK_STR(__USB_PHY_TYPE) "\0"             \
 657         "usb_dr_mode=host\0"                                    \
 658         "ramdiskaddr=2000000\0"                                 \
 659         "ramdiskfile=p2041rdb/ramdisk.uboot\0"                  \
 660         "fdtaddr=c00000\0"                                      \
 661         "fdtfile=p2041rdb/p2041rdb.dtb\0"                       \
 662         "bdev=sda3\0"                                           \
 663         "c=ffe\0"
 664
 665 #define CONFIG_HDBOOT                                   \
 666         "setenv bootargs root=/dev/$bdev rw "           \
 667         "console=$consoledev,$baudrate $othbootargs;"   \
 668         "tftp $loadaddr $bootfile;"                     \
 669         "tftp $fdtaddr $fdtfile;"                       \
 670         "bootm $loadaddr - $fdtaddr"
 671
 672 #define CONFIG_NFSBOOTCOMMAND                   \
 673         "setenv bootargs root=/dev/nfs rw "     \
 674         "nfsroot=$serverip:$rootpath "          \
 675         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 676         "console=$consoledev,$baudrate $othbootargs;"   \
 677         "tftp $loadaddr $bootfile;"             \
 678         "tftp $fdtaddr $fdtfile;"               \
 679         "bootm $loadaddr - $fdtaddr"
 680
 681 #define CONFIG_RAMBOOTCOMMAND                           \
 682         "setenv bootargs root=/dev/ram rw "             \
 683         "console=$consoledev,$baudrate $othbootargs;"   \
 684         "tftp $ramdiskaddr $ramdiskfile;"               \
 685         "tftp $loadaddr $bootfile;"                     \
 686         "tftp $fdtaddr $fdtfile;"                       \
 687         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 688
 689 #define CONFIG_BOOTCOMMAND              CONFIG_HDBOOT
 690
 691 #ifdef CONFIG_SECURE_BOOT
 692 #include <asm/fsl_secure_boot.h>
 693 #endif
 694
 695 #endif  /* __CONFIG_H */