include/configs/P1010RDB.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright 2010-2011 Freescale Semiconductor, Inc.
   4  * Copyright 2020 NXP
   5  */
   6
   7 /*
   8  * P010 RDB board configuration file
   9  */
  10
  11 #ifndef __CONFIG_H
  12 #define __CONFIG_H
  13
  14 #include <linux/stringify.h>
  15
  16 #include <asm/config_mpc85xx.h>
  17
  18 #ifdef CONFIG_SDCARD
  19 #define CONFIG_SPL_FLUSH_IMAGE
  20 #define CONFIG_SPL_TARGET               "u-boot-with-spl.bin"
  21 #define CONFIG_SPL_PAD_TO               0x18000
  22 #define CONFIG_SPL_MAX_SIZE             (96 * 1024)
  23 #define CONFIG_SYS_MMC_U_BOOT_SIZE      (512 << 10)
  24 #define CONFIG_SYS_MMC_U_BOOT_DST       (0x11000000)
  25 #define CONFIG_SYS_MMC_U_BOOT_START     (0x11000000)
  26 #define CONFIG_SYS_MMC_U_BOOT_OFFS      (96 << 10)
  27 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
  28 #ifdef CONFIG_SPL_BUILD
  29 #define CONFIG_SPL_COMMON_INIT_DDR
  30 #endif
  31 #endif
  32
  33 #ifdef CONFIG_SPIFLASH
  34 #ifdef CONFIG_NXP_ESBC
  35 #define CONFIG_RAMBOOT_SPIFLASH
  36 #define CONFIG_RESET_VECTOR_ADDRESS     0x110bfffc
  37 #else
  38 #define CONFIG_SPL_SPI_FLASH_MINIMAL
  39 #define CONFIG_SPL_FLUSH_IMAGE
  40 #define CONFIG_SPL_TARGET               "u-boot-with-spl.bin"
  41 #define CONFIG_SPL_PAD_TO                       0x18000
  42 #define CONFIG_SPL_MAX_SIZE                     (96 * 1024)
  43 #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE        (512 << 10)
  44 #define CONFIG_SYS_SPI_FLASH_U_BOOT_DST         (0x11000000)
  45 #define CONFIG_SYS_SPI_FLASH_U_BOOT_START       (0x11000000)
  46 #define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS        (96 << 10)
  47 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
  48 #ifdef CONFIG_SPL_BUILD
  49 #define CONFIG_SPL_COMMON_INIT_DDR
  50 #endif
  51 #endif
  52 #endif
  53
  54 #ifdef CONFIG_MTD_RAW_NAND
  55 #ifdef CONFIG_NXP_ESBC
  56 #define CONFIG_SPL_INIT_MINIMAL
  57 #define CONFIG_SPL_FLUSH_IMAGE
  58 #define CONFIG_SPL_TARGET               "u-boot-with-spl.bin"
  59
  60 #define CONFIG_SPL_MAX_SIZE             8192
  61 #define CONFIG_SPL_RELOC_TEXT_BASE      0x00100000
  62 #define CONFIG_SPL_RELOC_STACK          0x00100000
  63 #define CONFIG_SYS_NAND_U_BOOT_SIZE     ((768 << 10) - 0x2000)
  64 #define CONFIG_SYS_NAND_U_BOOT_DST      (0x00200000 - CONFIG_SPL_MAX_SIZE)
  65 #define CONFIG_SYS_NAND_U_BOOT_START    0x00200000
  66 #define CONFIG_SYS_NAND_U_BOOT_OFFS     0
  67 #else
  68 #ifdef CONFIG_TPL_BUILD
  69 #define CONFIG_SPL_FLUSH_IMAGE
  70 #define CONFIG_SPL_NAND_INIT
  71 #define CONFIG_SPL_COMMON_INIT_DDR
  72 #define CONFIG_SPL_MAX_SIZE             (128 << 10)
  73 #define CONFIG_TPL_TEXT_BASE            0xD0001000
  74 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
  75 #define CONFIG_SYS_NAND_U_BOOT_SIZE     (576 << 10)
  76 #define CONFIG_SYS_NAND_U_BOOT_DST      (0x11000000)
  77 #define CONFIG_SYS_NAND_U_BOOT_START    (0x11000000)
  78 #define CONFIG_SYS_NAND_U_BOOT_OFFS     ((128 + 128) << 10)
  79 #elif defined(CONFIG_SPL_BUILD)
  80 #define CONFIG_SPL_INIT_MINIMAL
  81 #define CONFIG_SPL_NAND_MINIMAL
  82 #define CONFIG_SPL_FLUSH_IMAGE
  83 #define CONFIG_SPL_MAX_SIZE             8192
  84 #define CONFIG_SYS_NAND_U_BOOT_SIZE     (128 << 10)
  85 #define CONFIG_SYS_NAND_U_BOOT_DST      0xD0000000
  86 #define CONFIG_SYS_NAND_U_BOOT_START    0xD0000000
  87 #define CONFIG_SYS_NAND_U_BOOT_OFFS     (128 << 10)
  88 #endif
  89 #define CONFIG_SPL_PAD_TO       0x20000
  90 #define CONFIG_TPL_PAD_TO       0x20000
  91 #define CONFIG_SPL_TARGET       "u-boot-with-spl.bin"
  92 #endif
  93 #endif
  94
  95 #ifdef CONFIG_NAND_SECBOOT      /* NAND Boot */
  96 #define CONFIG_RAMBOOT_NAND
  97 #define CONFIG_RESET_VECTOR_ADDRESS     0x110bfffc
  98 #endif
  99
 100 #ifndef CONFIG_RESET_VECTOR_ADDRESS
 101 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
 102 #endif
 103
 104 #ifdef CONFIG_TPL_BUILD
 105 #define CONFIG_SYS_MONITOR_BASE CONFIG_TPL_TEXT_BASE
 106 #elif defined(CONFIG_SPL_BUILD)
 107 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
 108 #else
 109 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
 110 #endif
 111
 112 /* High Level Configuration Options */
 113 #define CONFIG_SYS_HAS_SERDES           /* common SERDES init code */
 114
 115 #if defined(CONFIG_PCI)
 116 #define CONFIG_PCIE1                    /* PCIE controller 1 (slot 1) */
 117 #define CONFIG_PCIE2                    /* PCIE controller 2 (slot 2) */
 118 #define CONFIG_SYS_PCI_64BIT            /* enable 64-bit PCI resources */
 119
 120 /*
 121  * PCI Windows
 122  * Memory space is mapped 1-1, but I/O space must start from 0.
 123  */
 124 /* controller 1, Slot 1, tgtid 1, Base address a000 */
 125 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
 126 #ifdef CONFIG_PHYS_64BIT
 127 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
 128 #else
 129 #define CONFIG_SYS_PCIE1_MEM_PHYS       0x80000000
 130 #endif
 131 #define CONFIG_SYS_PCIE1_IO_VIRT        0xffc00000
 132 #ifdef CONFIG_PHYS_64BIT
 133 #define CONFIG_SYS_PCIE1_IO_PHYS        0xfffc00000ull
 134 #else
 135 #define CONFIG_SYS_PCIE1_IO_PHYS        0xffc00000
 136 #endif
 137
 138 /* controller 2, Slot 2, tgtid 2, Base address 9000 */
 139 #define CONFIG_SYS_PCIE2_MEM_VIRT       0xa0000000
 140 #ifdef CONFIG_PHYS_64BIT
 141 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc20000000ull
 142 #else
 143 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xa0000000
 144 #endif
 145 #define CONFIG_SYS_PCIE2_IO_VIRT        0xffc10000
 146 #ifdef CONFIG_PHYS_64BIT
 147 #define CONFIG_SYS_PCIE2_IO_PHYS        0xfffc10000ull
 148 #else
 149 #define CONFIG_SYS_PCIE2_IO_PHYS        0xffc10000
 150 #endif
 151
 152 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 153 #endif
 154
 155 #define CONFIG_SYS_CLK_FREQ     66666666 /* SYSCLK for P1010 RDB */
 156
 157 #define CONFIG_HWCONFIG
 158 /*
 159  * These can be toggled for performance analysis, otherwise use default.
 160  */
 161 #define CONFIG_L2_CACHE                 /* toggle L2 cache */
 162 #define CONFIG_BTB                      /* toggle branch predition */
 163
 164
 165 #define CONFIG_ENABLE_36BIT_PHYS
 166
 167 /* DDR Setup */
 168 #define CONFIG_SYS_DDR_RAW_TIMING
 169 #define CONFIG_SYS_SPD_BUS_NUM          1
 170 #define SPD_EEPROM_ADDRESS              0x52
 171
 172 #define CONFIG_MEM_INIT_VALUE           0xDeadBeef
 173
 174 #ifndef __ASSEMBLY__
 175 extern unsigned long get_sdram_size(void);
 176 #endif
 177 #define CONFIG_SYS_SDRAM_SIZE           get_sdram_size() /* DDR size */
 178 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 179 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 180
 181 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 182 #define CONFIG_CHIP_SELECTS_PER_CTRL    1
 183
 184 /* DDR3 Controller Settings */
 185 #define CONFIG_SYS_DDR_CS0_BNDS         0x0000003f
 186 #define CONFIG_SYS_DDR_CS0_CONFIG       0x80014302
 187 #define CONFIG_SYS_DDR_CS0_CONFIG_2     0x00000000
 188 #define CONFIG_SYS_DDR_DATA_INIT        0xdeadbeef
 189 #define CONFIG_SYS_DDR_INIT_ADDR        0x00000000
 190 #define CONFIG_SYS_DDR_INIT_EXT_ADDR    0x00000000
 191 #define CONFIG_SYS_DDR_MODE_CONTROL     0x00000000
 192 #define CONFIG_SYS_DDR_ZQ_CONTROL       0x89080600
 193 #define CONFIG_SYS_DDR_SR_CNTR          0x00000000
 194 #define CONFIG_SYS_DDR_RCW_1            0x00000000
 195 #define CONFIG_SYS_DDR_RCW_2            0x00000000
 196 #define CONFIG_SYS_DDR_CONTROL          0xc70c0008      /* Type = DDR3  */
 197 #define CONFIG_SYS_DDR_CONTROL_2        0x24401000
 198 #define CONFIG_SYS_DDR_TIMING_4         0x00000001
 199 #define CONFIG_SYS_DDR_TIMING_5         0x03402400
 200
 201 #define CONFIG_SYS_DDR_TIMING_3_800     0x00030000
 202 #define CONFIG_SYS_DDR_TIMING_0_800     0x00110104
 203 #define CONFIG_SYS_DDR_TIMING_1_800     0x6f6b8644
 204 #define CONFIG_SYS_DDR_TIMING_2_800     0x0FA888CF
 205 #define CONFIG_SYS_DDR_CLK_CTRL_800     0x03000000
 206 #define CONFIG_SYS_DDR_MODE_1_800       0x00441420
 207 #define CONFIG_SYS_DDR_MODE_2_800       0x00000000
 208 #define CONFIG_SYS_DDR_INTERVAL_800     0x0C300100
 209 #define CONFIG_SYS_DDR_WRLVL_CONTROL_800 0x8675f608
 210
 211 /* settings for DDR3 at 667MT/s */
 212 #define CONFIG_SYS_DDR_TIMING_3_667             0x00010000
 213 #define CONFIG_SYS_DDR_TIMING_0_667             0x00110004
 214 #define CONFIG_SYS_DDR_TIMING_1_667             0x5d59e544
 215 #define CONFIG_SYS_DDR_TIMING_2_667             0x0FA890CD
 216 #define CONFIG_SYS_DDR_CLK_CTRL_667             0x03000000
 217 #define CONFIG_SYS_DDR_MODE_1_667               0x00441210
 218 #define CONFIG_SYS_DDR_MODE_2_667               0x00000000
 219 #define CONFIG_SYS_DDR_INTERVAL_667             0x0a280000
 220 #define CONFIG_SYS_DDR_WRLVL_CONTROL_667        0x8675F608
 221
 222 #define CONFIG_SYS_CCSRBAR                      0xffe00000
 223 #define CONFIG_SYS_CCSRBAR_PHYS_LOW             CONFIG_SYS_CCSRBAR
 224
 225 /* Don't relocate CCSRBAR while in NAND_SPL */
 226 #ifdef CONFIG_SPL_BUILD
 227 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
 228 #endif
 229
 230 /*
 231  * Memory map
 232  *
 233  * 0x0000_0000  0x3fff_ffff     DDR                     1G cacheable
 234  * 0x8000_0000  0xbfff_ffff     PCI Express Mem         1.5G non-cacheable
 235  * 0xffc0_0000  0xffc3_ffff     PCI IO range            256k non-cacheable
 236  *
 237  * Localbus non-cacheable
 238  * 0xff80_0000  0xff8f_ffff     NAND Flash              1M non-cacheable
 239  * 0xffb0_0000  0xffbf_ffff     Board CPLD              1M non-cacheable
 240  * 0xffd0_0000  0xffd0_3fff     L1 for stack            16K Cacheable TLB0
 241  * 0xffe0_0000  0xffef_ffff     CCSR                    1M non-cacheable
 242  */
 243
 244 /*
 245  * IFC Definitions
 246  */
 247 /* NOR Flash on IFC */
 248
 249 #define CONFIG_SYS_FLASH_BASE           0xee000000
 250 #define CONFIG_SYS_MAX_FLASH_SECT       256     /* 32M */
 251
 252 #ifdef CONFIG_PHYS_64BIT
 253 #define CONFIG_SYS_FLASH_BASE_PHYS      (0xf00000000ull | CONFIG_SYS_FLASH_BASE)
 254 #else
 255 #define CONFIG_SYS_FLASH_BASE_PHYS      CONFIG_SYS_FLASH_BASE
 256 #endif
 257
 258 #define CONFIG_SYS_NOR_CSPR     (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
 259                                 CSPR_PORT_SIZE_16 | \
 260                                 CSPR_MSEL_NOR | \
 261                                 CSPR_V)
 262 #define CONFIG_SYS_NOR_AMASK    IFC_AMASK(32*1024*1024)
 263 #define CONFIG_SYS_NOR_CSOR     CSOR_NOR_ADM_SHIFT(7)
 264 /* NOR Flash Timing Params */
 265 #define CONFIG_SYS_NOR_FTIM0    FTIM0_NOR_TACSE(0x4) | \
 266                                 FTIM0_NOR_TEADC(0x5) | \
 267                                 FTIM0_NOR_TEAHC(0x5)
 268 #define CONFIG_SYS_NOR_FTIM1    FTIM1_NOR_TACO(0x1e) | \
 269                                 FTIM1_NOR_TRAD_NOR(0x0f)
 270 #define CONFIG_SYS_NOR_FTIM2    FTIM2_NOR_TCS(0x4) | \
 271                                 FTIM2_NOR_TCH(0x4) | \
 272                                 FTIM2_NOR_TWP(0x1c)
 273 #define CONFIG_SYS_NOR_FTIM3    0x0
 274
 275 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS}
 276 #define CONFIG_SYS_FLASH_QUIET_TEST
 277 #define CONFIG_FLASH_SHOW_PROGRESS      45      /* count down from 45/5: 9..1 */
 278 #define CONFIG_SYS_MAX_FLASH_BANKS      1       /* number of banks */
 279
 280 #undef CONFIG_SYS_FLASH_CHECKSUM
 281 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 282 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 283
 284 /* CFI for NOR Flash */
 285 #define CONFIG_SYS_FLASH_EMPTY_INFO
 286
 287 /* NAND Flash on IFC */
 288 #define CONFIG_SYS_NAND_BASE            0xff800000
 289 #ifdef CONFIG_PHYS_64BIT
 290 #define CONFIG_SYS_NAND_BASE_PHYS       0xfff800000ull
 291 #else
 292 #define CONFIG_SYS_NAND_BASE_PHYS       CONFIG_SYS_NAND_BASE
 293 #endif
 294
 295 #define CONFIG_MTD_PARTITION
 296
 297 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 298                                 | CSPR_PORT_SIZE_8      \
 299                                 | CSPR_MSEL_NAND        \
 300                                 | CSPR_V)
 301 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64*1024)
 302
 303 #if defined(CONFIG_TARGET_P1010RDB_PA)
 304 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 305                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 306                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
 307                                 | CSOR_NAND_RAL_2       /* RAL = 2 Bytes */ \
 308                                 | CSOR_NAND_PGS_512     /* Page Size = 512b */ \
 309                                 | CSOR_NAND_SPRZ_16     /* Spare size = 16 */ \
 310                                 | CSOR_NAND_PB(32))     /* 32 Pages Per Block */
 311
 312 #elif defined(CONFIG_TARGET_P1010RDB_PB)
 313 #define CONFIG_SYS_NAND_CSOR   (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 314                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 315                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
 316                                 | CSOR_NAND_RAL_3       /* RAL = 3Byes */ \
 317                                 | CSOR_NAND_PGS_4K      /* Page Size = 4K */ \
 318                                 | CSOR_NAND_SPRZ_224    /* Spare size = 224 */ \
 319                                 | CSOR_NAND_PB(128))  /*Pages Per Block = 128 */
 320 #endif
 321
 322 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
 323 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 324
 325 #if defined(CONFIG_TARGET_P1010RDB_PA)
 326 /* NAND Flash Timing Params */
 327 #define CONFIG_SYS_NAND_FTIM0           FTIM0_NAND_TCCST(0x01) | \
 328                                         FTIM0_NAND_TWP(0x0C)   | \
 329                                         FTIM0_NAND_TWCHT(0x04) | \
 330                                         FTIM0_NAND_TWH(0x05)
 331 #define CONFIG_SYS_NAND_FTIM1           FTIM1_NAND_TADLE(0x1d) | \
 332                                         FTIM1_NAND_TWBE(0x1d)  | \
 333                                         FTIM1_NAND_TRR(0x07)   | \
 334                                         FTIM1_NAND_TRP(0x0c)
 335 #define CONFIG_SYS_NAND_FTIM2           FTIM2_NAND_TRAD(0x0c) | \
 336                                         FTIM2_NAND_TREH(0x05) | \
 337                                         FTIM2_NAND_TWHRE(0x0f)
 338 #define CONFIG_SYS_NAND_FTIM3           FTIM3_NAND_TWW(0x04)
 339
 340 #elif defined(CONFIG_TARGET_P1010RDB_PB)
 341 /* support MT29F16G08ABABAWP 4k-pagesize 2G-bytes NAND */
 342 /* ONFI NAND Flash mode0 Timing Params */
 343 #define CONFIG_SYS_NAND_FTIM0  (FTIM0_NAND_TCCST(0x07)| \
 344                                         FTIM0_NAND_TWP(0x18)   | \
 345                                         FTIM0_NAND_TWCHT(0x07) | \
 346                                         FTIM0_NAND_TWH(0x0a))
 347 #define CONFIG_SYS_NAND_FTIM1  (FTIM1_NAND_TADLE(0x32)| \
 348                                         FTIM1_NAND_TWBE(0x39)  | \
 349                                         FTIM1_NAND_TRR(0x0e)   | \
 350                                         FTIM1_NAND_TRP(0x18))
 351 #define CONFIG_SYS_NAND_FTIM2  (FTIM2_NAND_TRAD(0x0f) | \
 352                                         FTIM2_NAND_TREH(0x0a)  | \
 353                                         FTIM2_NAND_TWHRE(0x1e))
 354 #define CONFIG_SYS_NAND_FTIM3   0x0
 355 #endif
 356
 357 #define CONFIG_SYS_NAND_DDR_LAW         11
 358
 359 /* Set up IFC registers for boot location NOR/NAND */
 360 #if defined(CONFIG_MTD_RAW_NAND) || defined(CONFIG_NAND_SECBOOT)
 361 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
 362 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
 363 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
 364 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
 365 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
 366 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
 367 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
 368 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR_CSPR
 369 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
 370 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 371 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 372 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 373 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 374 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 375 #else
 376 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR_CSPR
 377 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 378 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 379 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 380 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 381 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 382 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 383 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NAND_CSPR
 384 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NAND_AMASK
 385 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NAND_CSOR
 386 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NAND_FTIM0
 387 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NAND_FTIM1
 388 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NAND_FTIM2
 389 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NAND_FTIM3
 390 #endif
 391
 392 /* CPLD on IFC */
 393 #define CONFIG_SYS_CPLD_BASE            0xffb00000
 394
 395 #ifdef CONFIG_PHYS_64BIT
 396 #define CONFIG_SYS_CPLD_BASE_PHYS       0xfffb00000ull
 397 #else
 398 #define CONFIG_SYS_CPLD_BASE_PHYS       CONFIG_SYS_CPLD_BASE
 399 #endif
 400
 401 #define CONFIG_SYS_CSPR3        (CSPR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE_PHYS) \
 402                                 | CSPR_PORT_SIZE_8 \
 403                                 | CSPR_MSEL_GPCM \
 404                                 | CSPR_V)
 405 #define CONFIG_SYS_AMASK3               IFC_AMASK(64*1024)
 406 #define CONFIG_SYS_CSOR3                0x0
 407 /* CPLD Timing parameters for IFC CS3 */
 408 #define CONFIG_SYS_CS3_FTIM0            (FTIM0_GPCM_TACSE(0x0e) | \
 409                                         FTIM0_GPCM_TEADC(0x0e) | \
 410                                         FTIM0_GPCM_TEAHC(0x0e))
 411 #define CONFIG_SYS_CS3_FTIM1            (FTIM1_GPCM_TACO(0x0e) | \
 412                                         FTIM1_GPCM_TRAD(0x1f))
 413 #define CONFIG_SYS_CS3_FTIM2            (FTIM2_GPCM_TCS(0x0e) | \
 414                                         FTIM2_GPCM_TCH(0x8) | \
 415                                         FTIM2_GPCM_TWP(0x1f))
 416 #define CONFIG_SYS_CS3_FTIM3            0x0
 417
 418 #if defined(CONFIG_RAMBOOT_SDCARD) || defined(CONFIG_RAMBOOT_SPIFLASH) || \
 419         defined(CONFIG_RAMBOOT_NAND)
 420 #define CONFIG_SYS_RAMBOOT
 421 #else
 422 #undef CONFIG_SYS_RAMBOOT
 423 #endif
 424
 425 #ifdef CONFIG_SYS_FSL_ERRATUM_IFC_A003399
 426 #if !defined(CONFIG_SPL) && !defined(CONFIG_SYS_RAMBOOT)
 427 #define CONFIG_A003399_NOR_WORKAROUND
 428 #endif
 429 #endif
 430
 431 #define CONFIG_SYS_INIT_RAM_LOCK
 432 #define CONFIG_SYS_INIT_RAM_ADDR        0xffd00000 /* stack in RAM */
 433 #define CONFIG_SYS_INIT_RAM_SIZE        0x00004000 /* End of used area in RAM */
 434
 435 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE \
 436                                                 - GENERATED_GBL_DATA_SIZE)
 437 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 438
 439 #define CONFIG_SYS_MONITOR_LEN          (768 * 1024)
 440
 441 /*
 442  * Config the L2 Cache as L2 SRAM
 443  */
 444 #if defined(CONFIG_SPL_BUILD)
 445 #if defined(CONFIG_SDCARD) || defined(CONFIG_SPIFLASH)
 446 #define CONFIG_SYS_INIT_L2_ADDR         0xD0000000
 447 #define CONFIG_SYS_INIT_L2_ADDR_PHYS    CONFIG_SYS_INIT_L2_ADDR
 448 #define CONFIG_SYS_L2_SIZE              (256 << 10)
 449 #define CONFIG_SYS_INIT_L2_END  (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
 450 #define CONFIG_SPL_RELOC_TEXT_BASE      0xD0001000
 451 #define CONFIG_SPL_RELOC_STACK          (CONFIG_SYS_INIT_L2_ADDR + 112 * 1024)
 452 #define CONFIG_SPL_RELOC_MALLOC_ADDR    (CONFIG_SYS_INIT_L2_ADDR + 128 * 1024)
 453 #define CONFIG_SPL_RELOC_MALLOC_SIZE    (128 << 10)
 454 #define CONFIG_SPL_GD_ADDR              (CONFIG_SYS_INIT_L2_ADDR + 96 * 1024)
 455 #elif defined(CONFIG_MTD_RAW_NAND)
 456 #ifdef CONFIG_TPL_BUILD
 457 #define CONFIG_SYS_INIT_L2_ADDR         0xD0000000
 458 #define CONFIG_SYS_INIT_L2_ADDR_PHYS    CONFIG_SYS_INIT_L2_ADDR
 459 #define CONFIG_SYS_L2_SIZE              (256 << 10)
 460 #define CONFIG_SYS_INIT_L2_END  (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
 461 #define CONFIG_SPL_RELOC_TEXT_BASE      0xD0001000
 462 #define CONFIG_SPL_RELOC_STACK          (CONFIG_SYS_INIT_L2_ADDR + 192 * 1024)
 463 #define CONFIG_SPL_RELOC_MALLOC_ADDR    (CONFIG_SYS_INIT_L2_ADDR + 208 * 1024)
 464 #define CONFIG_SPL_RELOC_MALLOC_SIZE    (48 << 10)
 465 #define CONFIG_SPL_GD_ADDR              (CONFIG_SYS_INIT_L2_ADDR + 176 * 1024)
 466 #else
 467 #define CONFIG_SYS_INIT_L2_ADDR         0xD0000000
 468 #define CONFIG_SYS_INIT_L2_ADDR_PHYS    CONFIG_SYS_INIT_L2_ADDR
 469 #define CONFIG_SYS_L2_SIZE              (256 << 10)
 470 #define CONFIG_SYS_INIT_L2_END  (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
 471 #define CONFIG_SPL_RELOC_TEXT_BASE      (CONFIG_SYS_INIT_L2_END - 0x3000)
 472 #define CONFIG_SPL_RELOC_STACK          ((CONFIG_SYS_INIT_L2_END - 1) & ~0xF)
 473 #endif
 474 #endif
 475 #endif
 476
 477 /* Serial Port */
 478 #undef  CONFIG_SERIAL_SOFTWARE_FIFO
 479 #define CONFIG_SYS_NS16550_SERIAL
 480 #define CONFIG_SYS_NS16550_REG_SIZE     1
 481 #define CONFIG_SYS_NS16550_CLK          get_bus_freq(0)
 482 #if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_INIT_MINIMAL)
 483 #define CONFIG_NS16550_MIN_FUNCTIONS
 484 #endif
 485
 486 #define CONFIG_SYS_BAUDRATE_TABLE       \
 487         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 488
 489 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500)
 490 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600)
 491
 492 /* I2C */
 493 #define I2C_PCA9557_ADDR1               0x18
 494 #define I2C_PCA9557_ADDR2               0x19
 495 #define I2C_PCA9557_BUS_NUM             0
 496
 497 /* I2C EEPROM */
 498 #if defined(CONFIG_TARGET_P1010RDB_PB)
 499 #ifdef CONFIG_ID_EEPROM
 500 #define CONFIG_SYS_I2C_EEPROM_NXID
 501 #endif
 502 #define CONFIG_SYS_EEPROM_BUS_NUM       0
 503 #define MAX_NUM_PORTS                   9 /* for 128Bytes EEPROM */
 504 #endif
 505 /* enable read and write access to EEPROM */
 506
 507 /* RTC */
 508 #define CONFIG_RTC_PT7C4338
 509 #define CONFIG_SYS_I2C_RTC_ADDR 0x68
 510
 511 /*
 512  * SPI interface will not be available in case of NAND boot SPI CS0 will be
 513  * used for SLIC
 514  */
 515 #if !defined(CONFIG_MTD_RAW_NAND) || !defined(CONFIG_NAND_SECBOOT)
 516 /* eSPI - Enhanced SPI */
 517 #endif
 518
 519 #if defined(CONFIG_TSEC_ENET)
 520 #define CONFIG_MII_DEFAULT_TSEC 1       /* Allow unregistered phys */
 521 #define CONFIG_TSEC1    1
 522 #define CONFIG_TSEC1_NAME       "eTSEC1"
 523 #define CONFIG_TSEC2    1
 524 #define CONFIG_TSEC2_NAME       "eTSEC2"
 525 #define CONFIG_TSEC3    1
 526 #define CONFIG_TSEC3_NAME       "eTSEC3"
 527
 528 #define TSEC1_PHY_ADDR          1
 529 #define TSEC2_PHY_ADDR          0
 530 #define TSEC3_PHY_ADDR          2
 531
 532 #define TSEC1_FLAGS             (TSEC_GIGABIT | TSEC_REDUCED)
 533 #define TSEC2_FLAGS             (TSEC_GIGABIT | TSEC_REDUCED)
 534 #define TSEC3_FLAGS             (TSEC_GIGABIT | TSEC_REDUCED)
 535
 536 #define TSEC1_PHYIDX            0
 537 #define TSEC2_PHYIDX            0
 538 #define TSEC3_PHYIDX            0
 539
 540 #define CONFIG_ETHPRIME         "eTSEC1"
 541
 542 /* TBI PHY configuration for SGMII mode */
 543 #define CONFIG_TSEC_TBICR_SETTINGS ( \
 544                 TBICR_PHY_RESET \
 545                 | TBICR_ANEG_ENABLE \
 546                 | TBICR_FULL_DUPLEX \
 547                 | TBICR_SPEED1_SET \
 548                 )
 549
 550 #endif  /* CONFIG_TSEC_ENET */
 551
 552 /* SATA */
 553 #define CONFIG_FSL_SATA_V2
 554
 555 #ifdef CONFIG_FSL_SATA
 556 #define CONFIG_SYS_SATA_MAX_DEVICE      2
 557 #define CONFIG_SATA1
 558 #define CONFIG_SYS_SATA1                CONFIG_SYS_MPC85xx_SATA1_ADDR
 559 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
 560 #define CONFIG_SATA2
 561 #define CONFIG_SYS_SATA2                CONFIG_SYS_MPC85xx_SATA2_ADDR
 562 #define CONFIG_SYS_SATA2_FLAGS          FLAGS_DMA
 563
 564 #define CONFIG_LBA48
 565 #endif /* #ifdef CONFIG_FSL_SATA  */
 566
 567 #ifdef CONFIG_MMC
 568 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 569 #endif
 570
 571 #define CONFIG_HAS_FSL_DR_USB
 572
 573 #if defined(CONFIG_HAS_FSL_DR_USB)
 574 #ifdef CONFIG_USB_EHCI_HCD
 575 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 576 #define CONFIG_USB_EHCI_FSL
 577 #endif
 578 #endif
 579
 580 /*
 581  * Environment
 582  */
 583 #if defined(CONFIG_SDCARD)
 584 #define CONFIG_FSL_FIXED_MMC_LOCATION
 585 #elif defined(CONFIG_MTD_RAW_NAND)
 586 #ifdef CONFIG_TPL_BUILD
 587 #define SPL_ENV_ADDR            (CONFIG_SYS_INIT_L2_ADDR + (160 << 10))
 588 #else
 589 #if defined(CONFIG_TARGET_P1010RDB_PA)
 590 #define CONFIG_ENV_RANGE        (3 * CONFIG_ENV_SIZE) /* 3*16=48K for env */
 591 #elif defined(CONFIG_TARGET_P1010RDB_PB)
 592 #define CONFIG_ENV_RANGE        (32 * CONFIG_ENV_SIZE) /* new block size 512K */
 593 #endif
 594 #endif
 595 #endif
 596
 597 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
 598 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 599
 600 #undef CONFIG_WATCHDOG                  /* watchdog disabled */
 601
 602 #if defined(CONFIG_MMC) || defined(CONFIG_USB_EHCI_HCD) \
 603                  || defined(CONFIG_FSL_SATA)
 604 #endif
 605
 606 /*
 607  * Miscellaneous configurable options
 608  */
 609
 610 /*
 611  * For booting Linux, the board info and command line data
 612  * have to be in the first 64 MB of memory, since this is
 613  * the maximum mapped by the Linux kernel during initialization.
 614  */
 615 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20) /* Initial Memory map for Linux */
 616 #define CONFIG_SYS_BOOTM_LEN    (64 << 20) /* Increase max gunzip size */
 617
 618 /*
 619  * Environment Configuration
 620  */
 621
 622 #if defined(CONFIG_TSEC_ENET)
 623 #define CONFIG_HAS_ETH0
 624 #define CONFIG_HAS_ETH1
 625 #define CONFIG_HAS_ETH2
 626 #endif
 627
 628 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 629 #define CONFIG_BOOTFILE         "uImage"
 630 #define CONFIG_UBOOTPATH        u-boot.bin/* U-Boot image on TFTP server */
 631
 632 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 633         "hwconfig=" __stringify(CONFIG_DEF_HWCONFIG)  "\0"      \
 634         "netdev=eth0\0"                                         \
 635         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"             \
 636         "loadaddr=1000000\0"                    \
 637         "consoledev=ttyS0\0"                            \
 638         "ramdiskaddr=2000000\0"                 \
 639         "ramdiskfile=rootfs.ext2.gz.uboot\0"            \
 640         "fdtaddr=1e00000\0"                             \
 641         "fdtfile=p1010rdb.dtb\0"                \
 642         "bdev=sda1\0"   \
 643         "hwconfig=usb1:dr_mode=host,phy_type=utmi\0"    \
 644         "othbootargs=ramdisk_size=600000\0" \
 645         "usbfatboot=setenv bootargs root=/dev/ram rw "  \
 646         "console=$consoledev,$baudrate $othbootargs; "  \
 647         "usb start;"                    \
 648         "fatload usb 0:2 $loadaddr $bootfile;"          \
 649         "fatload usb 0:2 $fdtaddr $fdtfile;"    \
 650         "fatload usb 0:2 $ramdiskaddr $ramdiskfile;"    \
 651         "bootm $loadaddr $ramdiskaddr $fdtaddr\0"               \
 652         "usbext2boot=setenv bootargs root=/dev/ram rw " \
 653         "console=$consoledev,$baudrate $othbootargs; "  \
 654         "usb start;"                    \
 655         "ext2load usb 0:4 $loadaddr $bootfile;"         \
 656         "ext2load usb 0:4 $fdtaddr $fdtfile;"   \
 657         "ext2load usb 0:4 $ramdiskaddr $ramdiskfile;"   \
 658         "bootm $loadaddr $ramdiskaddr $fdtaddr\0"       \
 659         CONFIG_BOOTMODE
 660
 661 #if defined(CONFIG_TARGET_P1010RDB_PA)
 662 #define CONFIG_BOOTMODE \
 663         "boot_bank0=i2c dev 0; i2c mw 18 1 f1; i2c mw 18 3 f0;" \
 664         "mw.b ffb00011 0; mw.b ffb00009 0; reset\0" \
 665         "boot_bank1=i2c dev 0; i2c mw 18 1 f1; i2c mw 18 3 f0;" \
 666         "mw.b ffb00011 0; mw.b ffb00009 1; reset\0" \
 667         "boot_nand=i2c dev 0; i2c mw 18 1 f9; i2c mw 18 3 f0;" \
 668         "mw.b ffb00011 0; mw.b ffb00017 1; reset\0"
 669
 670 #elif defined(CONFIG_TARGET_P1010RDB_PB)
 671 #define CONFIG_BOOTMODE \
 672         "boot_bank0=i2c dev 0; i2c mw 18 1 fe; i2c mw 18 3 0;" \
 673         "i2c mw 19 1 2; i2c mw 19 3 e1; reset\0" \
 674         "boot_bank1=i2c dev 0; i2c mw 18 1 fe; i2c mw 18 3 0;" \
 675         "i2c mw 19 1 12; i2c mw 19 3 e1; reset\0" \
 676         "boot_nand=i2c dev 0; i2c mw 18 1 fc; i2c mw 18 3 0;" \
 677         "i2c mw 19 1 8; i2c mw 19 3 f7; reset\0" \
 678         "boot_spi=i2c dev 0; i2c mw 18 1 fa; i2c mw 18 3 0;" \
 679         "i2c mw 19 1 0; i2c mw 19 3 f7; reset\0" \
 680         "boot_sd=i2c dev 0; i2c mw 18 1 f8; i2c mw 18 3 0;" \
 681         "i2c mw 19 1 4; i2c mw 19 3 f3; reset\0"
 682 #endif
 683
 684 #include <asm/fsl_secure_boot.h>
 685
 686 #endif  /* __CONFIG_H */