include/configs/P1010RDB.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright 2010-2011 Freescale Semiconductor, Inc.
   4  * Copyright 2020 NXP
   5  */
   6
   7 /*
   8  * P010 RDB board configuration file
   9  */
  10
  11 #ifndef __CONFIG_H
  12 #define __CONFIG_H
  13
  14 #include <linux/stringify.h>
  15
  16 #include <asm/config_mpc85xx.h>
  17
  18 #ifdef CONFIG_SDCARD
  19 #define CONFIG_SYS_MMC_U_BOOT_SIZE      (512 << 10)
  20 #define CONFIG_SYS_MMC_U_BOOT_DST       (0x11000000)
  21 #define CONFIG_SYS_MMC_U_BOOT_START     (0x11000000)
  22 #define CONFIG_SYS_MMC_U_BOOT_OFFS      (96 << 10)
  23 #endif
  24
  25 #ifdef CONFIG_SPIFLASH
  26 #ifdef CONFIG_NXP_ESBC
  27 #define CONFIG_RAMBOOT_SPIFLASH
  28 #define CONFIG_RESET_VECTOR_ADDRESS     0x110bfffc
  29 #else
  30 #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE        (512 << 10)
  31 #define CONFIG_SYS_SPI_FLASH_U_BOOT_DST         (0x11000000)
  32 #define CONFIG_SYS_SPI_FLASH_U_BOOT_START       (0x11000000)
  33 #define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS        (96 << 10)
  34 #endif
  35 #endif
  36
  37 #ifdef CONFIG_MTD_RAW_NAND
  38 #ifdef CONFIG_NXP_ESBC
  39 #define CONFIG_SYS_NAND_U_BOOT_SIZE     ((768 << 10) - 0x2000)
  40 #define CONFIG_SYS_NAND_U_BOOT_DST      (0x00200000 - CONFIG_SPL_MAX_SIZE)
  41 #define CONFIG_SYS_NAND_U_BOOT_START    0x00200000
  42 #else
  43 #ifdef CONFIG_TPL_BUILD
  44 #define CONFIG_SYS_NAND_U_BOOT_SIZE     (576 << 10)
  45 #define CONFIG_SYS_NAND_U_BOOT_DST      (0x11000000)
  46 #define CONFIG_SYS_NAND_U_BOOT_START    (0x11000000)
  47 #elif defined(CONFIG_SPL_BUILD)
  48 #define CONFIG_SYS_NAND_U_BOOT_SIZE     (128 << 10)
  49 #define CONFIG_SYS_NAND_U_BOOT_DST      0xD0000000
  50 #define CONFIG_SYS_NAND_U_BOOT_START    0xD0000000
  51 #endif
  52 #endif
  53 #endif
  54
  55 #ifdef CONFIG_NAND_SECBOOT      /* NAND Boot */
  56 #define CONFIG_RAMBOOT_NAND
  57 #define CONFIG_RESET_VECTOR_ADDRESS     0x110bfffc
  58 #endif
  59
  60 #ifndef CONFIG_RESET_VECTOR_ADDRESS
  61 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
  62 #endif
  63
  64 /* High Level Configuration Options */
  65
  66 #if defined(CONFIG_PCI)
  67 #define CONFIG_PCIE1                    /* PCIE controller 1 (slot 1) */
  68 #define CONFIG_PCIE2                    /* PCIE controller 2 (slot 2) */
  69
  70 /*
  71  * PCI Windows
  72  * Memory space is mapped 1-1, but I/O space must start from 0.
  73  */
  74 /* controller 1, Slot 1, tgtid 1, Base address a000 */
  75 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
  76 #ifdef CONFIG_PHYS_64BIT
  77 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
  78 #else
  79 #define CONFIG_SYS_PCIE1_MEM_PHYS       0x80000000
  80 #endif
  81 #define CONFIG_SYS_PCIE1_IO_VIRT        0xffc00000
  82 #ifdef CONFIG_PHYS_64BIT
  83 #define CONFIG_SYS_PCIE1_IO_PHYS        0xfffc00000ull
  84 #else
  85 #define CONFIG_SYS_PCIE1_IO_PHYS        0xffc00000
  86 #endif
  87
  88 /* controller 2, Slot 2, tgtid 2, Base address 9000 */
  89 #define CONFIG_SYS_PCIE2_MEM_VIRT       0xa0000000
  90 #ifdef CONFIG_PHYS_64BIT
  91 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc20000000ull
  92 #else
  93 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xa0000000
  94 #endif
  95 #define CONFIG_SYS_PCIE2_IO_VIRT        0xffc10000
  96 #ifdef CONFIG_PHYS_64BIT
  97 #define CONFIG_SYS_PCIE2_IO_PHYS        0xfffc10000ull
  98 #else
  99 #define CONFIG_SYS_PCIE2_IO_PHYS        0xffc10000
 100 #endif
 101
 102 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 103 #endif
 104
 105 #define CONFIG_HWCONFIG
 106 /*
 107  * These can be toggled for performance analysis, otherwise use default.
 108  */
 109 #define CONFIG_L2_CACHE                 /* toggle L2 cache */
 110
 111 /* DDR Setup */
 112 #define CONFIG_SYS_DDR_RAW_TIMING
 113 #define CONFIG_SYS_SPD_BUS_NUM          1
 114 #define SPD_EEPROM_ADDRESS              0x52
 115
 116 #define CONFIG_MEM_INIT_VALUE           0xDeadBeef
 117
 118 #ifndef __ASSEMBLY__
 119 extern unsigned long get_sdram_size(void);
 120 #endif
 121 #define CONFIG_SYS_SDRAM_SIZE           get_sdram_size() /* DDR size */
 122 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 123 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 124
 125 /* DDR3 Controller Settings */
 126 #define CONFIG_SYS_DDR_CS0_BNDS         0x0000003f
 127 #define CONFIG_SYS_DDR_CS0_CONFIG       0x80014302
 128 #define CONFIG_SYS_DDR_CS0_CONFIG_2     0x00000000
 129 #define CONFIG_SYS_DDR_DATA_INIT        0xdeadbeef
 130 #define CONFIG_SYS_DDR_INIT_ADDR        0x00000000
 131 #define CONFIG_SYS_DDR_INIT_EXT_ADDR    0x00000000
 132 #define CONFIG_SYS_DDR_MODE_CONTROL     0x00000000
 133 #define CONFIG_SYS_DDR_ZQ_CONTROL       0x89080600
 134 #define CONFIG_SYS_DDR_SR_CNTR          0x00000000
 135 #define CONFIG_SYS_DDR_RCW_1            0x00000000
 136 #define CONFIG_SYS_DDR_RCW_2            0x00000000
 137 #define CONFIG_SYS_DDR_CONTROL          0xc70c0008      /* Type = DDR3  */
 138 #define CONFIG_SYS_DDR_CONTROL_2        0x24401000
 139 #define CONFIG_SYS_DDR_TIMING_4         0x00000001
 140 #define CONFIG_SYS_DDR_TIMING_5         0x03402400
 141
 142 #define CONFIG_SYS_DDR_TIMING_3_800     0x00030000
 143 #define CONFIG_SYS_DDR_TIMING_0_800     0x00110104
 144 #define CONFIG_SYS_DDR_TIMING_1_800     0x6f6b8644
 145 #define CONFIG_SYS_DDR_TIMING_2_800     0x0FA888CF
 146 #define CONFIG_SYS_DDR_CLK_CTRL_800     0x03000000
 147 #define CONFIG_SYS_DDR_MODE_1_800       0x00441420
 148 #define CONFIG_SYS_DDR_MODE_2_800       0x00000000
 149 #define CONFIG_SYS_DDR_INTERVAL_800     0x0C300100
 150 #define CONFIG_SYS_DDR_WRLVL_CONTROL_800 0x8675f608
 151
 152 /* settings for DDR3 at 667MT/s */
 153 #define CONFIG_SYS_DDR_TIMING_3_667             0x00010000
 154 #define CONFIG_SYS_DDR_TIMING_0_667             0x00110004
 155 #define CONFIG_SYS_DDR_TIMING_1_667             0x5d59e544
 156 #define CONFIG_SYS_DDR_TIMING_2_667             0x0FA890CD
 157 #define CONFIG_SYS_DDR_CLK_CTRL_667             0x03000000
 158 #define CONFIG_SYS_DDR_MODE_1_667               0x00441210
 159 #define CONFIG_SYS_DDR_MODE_2_667               0x00000000
 160 #define CONFIG_SYS_DDR_INTERVAL_667             0x0a280000
 161 #define CONFIG_SYS_DDR_WRLVL_CONTROL_667        0x8675F608
 162
 163 #define CONFIG_SYS_CCSRBAR                      0xffe00000
 164 #define CONFIG_SYS_CCSRBAR_PHYS_LOW             CONFIG_SYS_CCSRBAR
 165
 166 /*
 167  * Memory map
 168  *
 169  * 0x0000_0000  0x3fff_ffff     DDR                     1G cacheable
 170  * 0x8000_0000  0xbfff_ffff     PCI Express Mem         1.5G non-cacheable
 171  * 0xffc0_0000  0xffc3_ffff     PCI IO range            256k non-cacheable
 172  *
 173  * Localbus non-cacheable
 174  * 0xff80_0000  0xff8f_ffff     NAND Flash              1M non-cacheable
 175  * 0xffb0_0000  0xffbf_ffff     Board CPLD              1M non-cacheable
 176  * 0xffd0_0000  0xffd0_3fff     L1 for stack            16K Cacheable TLB0
 177  * 0xffe0_0000  0xffef_ffff     CCSR                    1M non-cacheable
 178  */
 179
 180 /*
 181  * IFC Definitions
 182  */
 183 /* NOR Flash on IFC */
 184
 185 #define CONFIG_SYS_FLASH_BASE           0xee000000
 186 #define CONFIG_SYS_MAX_FLASH_SECT       256     /* 32M */
 187
 188 #ifdef CONFIG_PHYS_64BIT
 189 #define CONFIG_SYS_FLASH_BASE_PHYS      (0xf00000000ull | CONFIG_SYS_FLASH_BASE)
 190 #else
 191 #define CONFIG_SYS_FLASH_BASE_PHYS      CONFIG_SYS_FLASH_BASE
 192 #endif
 193
 194 #define CONFIG_SYS_NOR_CSPR     (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
 195                                 CSPR_PORT_SIZE_16 | \
 196                                 CSPR_MSEL_NOR | \
 197                                 CSPR_V)
 198 #define CONFIG_SYS_NOR_AMASK    IFC_AMASK(32*1024*1024)
 199 #define CONFIG_SYS_NOR_CSOR     CSOR_NOR_ADM_SHIFT(7)
 200 /* NOR Flash Timing Params */
 201 #define CONFIG_SYS_NOR_FTIM0    FTIM0_NOR_TACSE(0x4) | \
 202                                 FTIM0_NOR_TEADC(0x5) | \
 203                                 FTIM0_NOR_TEAHC(0x5)
 204 #define CONFIG_SYS_NOR_FTIM1    FTIM1_NOR_TACO(0x1e) | \
 205                                 FTIM1_NOR_TRAD_NOR(0x0f)
 206 #define CONFIG_SYS_NOR_FTIM2    FTIM2_NOR_TCS(0x4) | \
 207                                 FTIM2_NOR_TCH(0x4) | \
 208                                 FTIM2_NOR_TWP(0x1c)
 209 #define CONFIG_SYS_NOR_FTIM3    0x0
 210
 211 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS}
 212 #define CONFIG_SYS_FLASH_QUIET_TEST
 213 #define CONFIG_FLASH_SHOW_PROGRESS      45      /* count down from 45/5: 9..1 */
 214
 215 #undef CONFIG_SYS_FLASH_CHECKSUM
 216 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 217 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 218
 219 /* CFI for NOR Flash */
 220 #define CONFIG_SYS_FLASH_EMPTY_INFO
 221
 222 /* NAND Flash on IFC */
 223 #define CONFIG_SYS_NAND_BASE            0xff800000
 224 #ifdef CONFIG_PHYS_64BIT
 225 #define CONFIG_SYS_NAND_BASE_PHYS       0xfff800000ull
 226 #else
 227 #define CONFIG_SYS_NAND_BASE_PHYS       CONFIG_SYS_NAND_BASE
 228 #endif
 229
 230 #define CONFIG_MTD_PARTITION
 231
 232 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 233                                 | CSPR_PORT_SIZE_8      \
 234                                 | CSPR_MSEL_NAND        \
 235                                 | CSPR_V)
 236 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64*1024)
 237
 238 #if defined(CONFIG_TARGET_P1010RDB_PA)
 239 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 240                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 241                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
 242                                 | CSOR_NAND_RAL_2       /* RAL = 2 Bytes */ \
 243                                 | CSOR_NAND_PGS_512     /* Page Size = 512b */ \
 244                                 | CSOR_NAND_SPRZ_16     /* Spare size = 16 */ \
 245                                 | CSOR_NAND_PB(32))     /* 32 Pages Per Block */
 246
 247 #elif defined(CONFIG_TARGET_P1010RDB_PB)
 248 #define CONFIG_SYS_NAND_CSOR   (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 249                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 250                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
 251                                 | CSOR_NAND_RAL_3       /* RAL = 3Byes */ \
 252                                 | CSOR_NAND_PGS_4K      /* Page Size = 4K */ \
 253                                 | CSOR_NAND_SPRZ_224    /* Spare size = 224 */ \
 254                                 | CSOR_NAND_PB(128))  /*Pages Per Block = 128 */
 255 #endif
 256
 257 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
 258 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 259
 260 #if defined(CONFIG_TARGET_P1010RDB_PA)
 261 /* NAND Flash Timing Params */
 262 #define CONFIG_SYS_NAND_FTIM0           FTIM0_NAND_TCCST(0x01) | \
 263                                         FTIM0_NAND_TWP(0x0C)   | \
 264                                         FTIM0_NAND_TWCHT(0x04) | \
 265                                         FTIM0_NAND_TWH(0x05)
 266 #define CONFIG_SYS_NAND_FTIM1           FTIM1_NAND_TADLE(0x1d) | \
 267                                         FTIM1_NAND_TWBE(0x1d)  | \
 268                                         FTIM1_NAND_TRR(0x07)   | \
 269                                         FTIM1_NAND_TRP(0x0c)
 270 #define CONFIG_SYS_NAND_FTIM2           FTIM2_NAND_TRAD(0x0c) | \
 271                                         FTIM2_NAND_TREH(0x05) | \
 272                                         FTIM2_NAND_TWHRE(0x0f)
 273 #define CONFIG_SYS_NAND_FTIM3           FTIM3_NAND_TWW(0x04)
 274
 275 #elif defined(CONFIG_TARGET_P1010RDB_PB)
 276 /* support MT29F16G08ABABAWP 4k-pagesize 2G-bytes NAND */
 277 /* ONFI NAND Flash mode0 Timing Params */
 278 #define CONFIG_SYS_NAND_FTIM0  (FTIM0_NAND_TCCST(0x07)| \
 279                                         FTIM0_NAND_TWP(0x18)   | \
 280                                         FTIM0_NAND_TWCHT(0x07) | \
 281                                         FTIM0_NAND_TWH(0x0a))
 282 #define CONFIG_SYS_NAND_FTIM1  (FTIM1_NAND_TADLE(0x32)| \
 283                                         FTIM1_NAND_TWBE(0x39)  | \
 284                                         FTIM1_NAND_TRR(0x0e)   | \
 285                                         FTIM1_NAND_TRP(0x18))
 286 #define CONFIG_SYS_NAND_FTIM2  (FTIM2_NAND_TRAD(0x0f) | \
 287                                         FTIM2_NAND_TREH(0x0a)  | \
 288                                         FTIM2_NAND_TWHRE(0x1e))
 289 #define CONFIG_SYS_NAND_FTIM3   0x0
 290 #endif
 291
 292 #define CONFIG_SYS_NAND_DDR_LAW         11
 293
 294 /* Set up IFC registers for boot location NOR/NAND */
 295 #if defined(CONFIG_MTD_RAW_NAND) || defined(CONFIG_NAND_SECBOOT)
 296 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
 297 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
 298 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
 299 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
 300 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
 301 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
 302 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
 303 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR_CSPR
 304 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
 305 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 306 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 307 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 308 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 309 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 310 #else
 311 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR_CSPR
 312 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 313 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 314 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 315 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 316 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 317 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 318 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NAND_CSPR
 319 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NAND_AMASK
 320 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NAND_CSOR
 321 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NAND_FTIM0
 322 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NAND_FTIM1
 323 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NAND_FTIM2
 324 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NAND_FTIM3
 325 #endif
 326
 327 /* CPLD on IFC */
 328 #define CONFIG_SYS_CPLD_BASE            0xffb00000
 329
 330 #ifdef CONFIG_PHYS_64BIT
 331 #define CONFIG_SYS_CPLD_BASE_PHYS       0xfffb00000ull
 332 #else
 333 #define CONFIG_SYS_CPLD_BASE_PHYS       CONFIG_SYS_CPLD_BASE
 334 #endif
 335
 336 #define CONFIG_SYS_CSPR3        (CSPR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE_PHYS) \
 337                                 | CSPR_PORT_SIZE_8 \
 338                                 | CSPR_MSEL_GPCM \
 339                                 | CSPR_V)
 340 #define CONFIG_SYS_AMASK3               IFC_AMASK(64*1024)
 341 #define CONFIG_SYS_CSOR3                0x0
 342 /* CPLD Timing parameters for IFC CS3 */
 343 #define CONFIG_SYS_CS3_FTIM0            (FTIM0_GPCM_TACSE(0x0e) | \
 344                                         FTIM0_GPCM_TEADC(0x0e) | \
 345                                         FTIM0_GPCM_TEAHC(0x0e))
 346 #define CONFIG_SYS_CS3_FTIM1            (FTIM1_GPCM_TACO(0x0e) | \
 347                                         FTIM1_GPCM_TRAD(0x1f))
 348 #define CONFIG_SYS_CS3_FTIM2            (FTIM2_GPCM_TCS(0x0e) | \
 349                                         FTIM2_GPCM_TCH(0x8) | \
 350                                         FTIM2_GPCM_TWP(0x1f))
 351 #define CONFIG_SYS_CS3_FTIM3            0x0
 352
 353 #if defined(CONFIG_RAMBOOT_SDCARD) || defined(CONFIG_RAMBOOT_SPIFLASH) || \
 354         defined(CONFIG_RAMBOOT_NAND)
 355 #define CONFIG_SYS_RAMBOOT
 356 #else
 357 #undef CONFIG_SYS_RAMBOOT
 358 #endif
 359
 360 #define CONFIG_SYS_INIT_RAM_LOCK
 361 #define CONFIG_SYS_INIT_RAM_ADDR        0xffd00000 /* stack in RAM */
 362 #define CONFIG_SYS_INIT_RAM_SIZE        0x00004000 /* End of used area in RAM */
 363
 364 #define CONFIG_SYS_INIT_SP_OFFSET       (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 365
 366 #define CONFIG_SYS_MONITOR_LEN          (768 * 1024)
 367
 368 /*
 369  * Config the L2 Cache as L2 SRAM
 370  */
 371 #if defined(CONFIG_SPL_BUILD)
 372 #if defined(CONFIG_SDCARD) || defined(CONFIG_SPIFLASH)
 373 #define CONFIG_SYS_INIT_L2_ADDR         0xD0000000
 374 #define CONFIG_SYS_INIT_L2_ADDR_PHYS    CONFIG_SYS_INIT_L2_ADDR
 375 #define CONFIG_SYS_L2_SIZE              (256 << 10)
 376 #define CONFIG_SYS_INIT_L2_END  (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
 377 #elif defined(CONFIG_MTD_RAW_NAND)
 378 #ifdef CONFIG_TPL_BUILD
 379 #define CONFIG_SYS_INIT_L2_ADDR         0xD0000000
 380 #define CONFIG_SYS_INIT_L2_ADDR_PHYS    CONFIG_SYS_INIT_L2_ADDR
 381 #define CONFIG_SYS_L2_SIZE              (256 << 10)
 382 #define CONFIG_SYS_INIT_L2_END  (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
 383 #else
 384 #define CONFIG_SYS_INIT_L2_ADDR         0xD0000000
 385 #define CONFIG_SYS_INIT_L2_ADDR_PHYS    CONFIG_SYS_INIT_L2_ADDR
 386 #define CONFIG_SYS_L2_SIZE              (256 << 10)
 387 #define CONFIG_SYS_INIT_L2_END  (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
 388 #endif
 389 #endif
 390 #endif
 391
 392 /* Serial Port */
 393 #undef  CONFIG_SERIAL_SOFTWARE_FIFO
 394 #define CONFIG_SYS_NS16550_SERIAL
 395 #define CONFIG_SYS_NS16550_REG_SIZE     1
 396 #define CONFIG_SYS_NS16550_CLK          get_bus_freq(0)
 397 #if defined(CONFIG_SPL_BUILD) && CONFIG_IS_ENABLED(INIT_MINIMAL)
 398 #define CONFIG_NS16550_MIN_FUNCTIONS
 399 #endif
 400
 401 #define CONFIG_SYS_BAUDRATE_TABLE       \
 402         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 403
 404 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500)
 405 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600)
 406
 407 /* I2C */
 408 #define I2C_PCA9557_ADDR1               0x18
 409 #define I2C_PCA9557_ADDR2               0x19
 410 #define I2C_PCA9557_BUS_NUM             0
 411
 412 /* I2C EEPROM */
 413 #if defined(CONFIG_TARGET_P1010RDB_PB)
 414 #ifdef CONFIG_ID_EEPROM
 415 #define CONFIG_SYS_I2C_EEPROM_NXID
 416 #endif
 417 #define CONFIG_SYS_EEPROM_BUS_NUM       0
 418 #define MAX_NUM_PORTS                   9 /* for 128Bytes EEPROM */
 419 #endif
 420 /* enable read and write access to EEPROM */
 421
 422 /* RTC */
 423 #define CONFIG_RTC_PT7C4338
 424 #define CONFIG_SYS_I2C_RTC_ADDR 0x68
 425
 426 /*
 427  * SPI interface will not be available in case of NAND boot SPI CS0 will be
 428  * used for SLIC
 429  */
 430 #if !defined(CONFIG_MTD_RAW_NAND) || !defined(CONFIG_NAND_SECBOOT)
 431 /* eSPI - Enhanced SPI */
 432 #endif
 433
 434 #if defined(CONFIG_TSEC_ENET)
 435 #define CONFIG_MII_DEFAULT_TSEC 1       /* Allow unregistered phys */
 436 #define CONFIG_TSEC1    1
 437 #define CONFIG_TSEC1_NAME       "eTSEC1"
 438 #define CONFIG_TSEC2    1
 439 #define CONFIG_TSEC2_NAME       "eTSEC2"
 440 #define CONFIG_TSEC3    1
 441 #define CONFIG_TSEC3_NAME       "eTSEC3"
 442
 443 #define TSEC1_PHY_ADDR          1
 444 #define TSEC2_PHY_ADDR          0
 445 #define TSEC3_PHY_ADDR          2
 446
 447 #define TSEC1_FLAGS             (TSEC_GIGABIT | TSEC_REDUCED)
 448 #define TSEC2_FLAGS             (TSEC_GIGABIT | TSEC_REDUCED)
 449 #define TSEC3_FLAGS             (TSEC_GIGABIT | TSEC_REDUCED)
 450
 451 #define TSEC1_PHYIDX            0
 452 #define TSEC2_PHYIDX            0
 453 #define TSEC3_PHYIDX            0
 454
 455 /* TBI PHY configuration for SGMII mode */
 456 #define CONFIG_TSEC_TBICR_SETTINGS ( \
 457                 TBICR_PHY_RESET \
 458                 | TBICR_ANEG_ENABLE \
 459                 | TBICR_FULL_DUPLEX \
 460                 | TBICR_SPEED1_SET \
 461                 )
 462
 463 #endif  /* CONFIG_TSEC_ENET */
 464
 465 #ifdef CONFIG_MMC
 466 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 467 #endif
 468
 469 /*
 470  * Environment
 471  */
 472 #if defined(CONFIG_SDCARD)
 473 #define CONFIG_FSL_FIXED_MMC_LOCATION
 474 #elif defined(CONFIG_MTD_RAW_NAND)
 475 #ifdef CONFIG_TPL_BUILD
 476 #define SPL_ENV_ADDR            (CONFIG_SYS_INIT_L2_ADDR + (160 << 10))
 477 #endif
 478 #endif
 479
 480 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
 481 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 482
 483 #if defined(CONFIG_MMC) || defined(CONFIG_USB_EHCI_HCD) \
 484                  || defined(CONFIG_FSL_SATA)
 485 #endif
 486
 487 /*
 488  * Miscellaneous configurable options
 489  */
 490
 491 /*
 492  * For booting Linux, the board info and command line data
 493  * have to be in the first 64 MB of memory, since this is
 494  * the maximum mapped by the Linux kernel during initialization.
 495  */
 496 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20) /* Initial Memory map for Linux */
 497 #define CONFIG_SYS_BOOTM_LEN    (64 << 20) /* Increase max gunzip size */
 498
 499 /*
 500  * Environment Configuration
 501  */
 502
 503 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 504 #define CONFIG_UBOOTPATH        u-boot.bin/* U-Boot image on TFTP server */
 505
 506 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 507         "hwconfig=" __stringify(CONFIG_DEF_HWCONFIG)  "\0"      \
 508         "netdev=eth0\0"                                         \
 509         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"             \
 510         "loadaddr=1000000\0"                    \
 511         "consoledev=ttyS0\0"                            \
 512         "ramdiskaddr=2000000\0"                 \
 513         "ramdiskfile=rootfs.ext2.gz.uboot\0"            \
 514         "fdtaddr=1e00000\0"                             \
 515         "fdtfile=p1010rdb.dtb\0"                \
 516         "bdev=sda1\0"   \
 517         "hwconfig=usb1:dr_mode=host,phy_type=utmi\0"    \
 518         "othbootargs=ramdisk_size=600000\0" \
 519         "usbfatboot=setenv bootargs root=/dev/ram rw "  \
 520         "console=$consoledev,$baudrate $othbootargs; "  \
 521         "usb start;"                    \
 522         "fatload usb 0:2 $loadaddr $bootfile;"          \
 523         "fatload usb 0:2 $fdtaddr $fdtfile;"    \
 524         "fatload usb 0:2 $ramdiskaddr $ramdiskfile;"    \
 525         "bootm $loadaddr $ramdiskaddr $fdtaddr\0"               \
 526         "usbext2boot=setenv bootargs root=/dev/ram rw " \
 527         "console=$consoledev,$baudrate $othbootargs; "  \
 528         "usb start;"                    \
 529         "ext2load usb 0:4 $loadaddr $bootfile;"         \
 530         "ext2load usb 0:4 $fdtaddr $fdtfile;"   \
 531         "ext2load usb 0:4 $ramdiskaddr $ramdiskfile;"   \
 532         "bootm $loadaddr $ramdiskaddr $fdtaddr\0"       \
 533         BOOTMODE
 534
 535 #if defined(CONFIG_TARGET_P1010RDB_PA)
 536 #define BOOTMODE \
 537         "boot_bank0=i2c dev 0; i2c mw 18 1 f1; i2c mw 18 3 f0;" \
 538         "mw.b ffb00011 0; mw.b ffb00009 0; reset\0" \
 539         "boot_bank1=i2c dev 0; i2c mw 18 1 f1; i2c mw 18 3 f0;" \
 540         "mw.b ffb00011 0; mw.b ffb00009 1; reset\0" \
 541         "boot_nand=i2c dev 0; i2c mw 18 1 f9; i2c mw 18 3 f0;" \
 542         "mw.b ffb00011 0; mw.b ffb00017 1; reset\0"
 543
 544 #elif defined(CONFIG_TARGET_P1010RDB_PB)
 545 #define BOOTMODE \
 546         "boot_bank0=i2c dev 0; i2c mw 18 1 fe; i2c mw 18 3 0;" \
 547         "i2c mw 19 1 2; i2c mw 19 3 e1; reset\0" \
 548         "boot_bank1=i2c dev 0; i2c mw 18 1 fe; i2c mw 18 3 0;" \
 549         "i2c mw 19 1 12; i2c mw 19 3 e1; reset\0" \
 550         "boot_nand=i2c dev 0; i2c mw 18 1 fc; i2c mw 18 3 0;" \
 551         "i2c mw 19 1 8; i2c mw 19 3 f7; reset\0" \
 552         "boot_spi=i2c dev 0; i2c mw 18 1 fa; i2c mw 18 3 0;" \
 553         "i2c mw 19 1 0; i2c mw 19 3 f7; reset\0" \
 554         "boot_sd=i2c dev 0; i2c mw 18 1 f8; i2c mw 18 3 0;" \
 555         "i2c mw 19 1 4; i2c mw 19 3 f3; reset\0"
 556 #endif
 557
 558 #include <asm/fsl_secure_boot.h>
 559
 560 #endif  /* __CONFIG_H */