include/configs/P1010RDB.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright 2010-2011 Freescale Semiconductor, Inc.
   4  * Copyright 2020 NXP
   5  */
   6
   7 /*
   8  * P010 RDB board configuration file
   9  */
  10
  11 #ifndef __CONFIG_H
  12 #define __CONFIG_H
  13
  14 #include <linux/stringify.h>
  15
  16 #include <asm/config_mpc85xx.h>
  17
  18 #ifdef CONFIG_SDCARD
  19 #define CONFIG_SPL_FLUSH_IMAGE
  20 #define CONFIG_SPL_TARGET               "u-boot-with-spl.bin"
  21 #define CONFIG_SPL_PAD_TO               0x18000
  22 #define CONFIG_SPL_MAX_SIZE             (96 * 1024)
  23 #define CONFIG_SYS_MMC_U_BOOT_SIZE      (512 << 10)
  24 #define CONFIG_SYS_MMC_U_BOOT_DST       (0x11000000)
  25 #define CONFIG_SYS_MMC_U_BOOT_START     (0x11000000)
  26 #define CONFIG_SYS_MMC_U_BOOT_OFFS      (96 << 10)
  27 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
  28 #ifdef CONFIG_SPL_BUILD
  29 #define CONFIG_SPL_COMMON_INIT_DDR
  30 #endif
  31 #endif
  32
  33 #ifdef CONFIG_SPIFLASH
  34 #ifdef CONFIG_NXP_ESBC
  35 #define CONFIG_RAMBOOT_SPIFLASH
  36 #define CONFIG_RESET_VECTOR_ADDRESS     0x110bfffc
  37 #else
  38 #define CONFIG_SPL_SPI_FLASH_MINIMAL
  39 #define CONFIG_SPL_FLUSH_IMAGE
  40 #define CONFIG_SPL_TARGET               "u-boot-with-spl.bin"
  41 #define CONFIG_SPL_PAD_TO                       0x18000
  42 #define CONFIG_SPL_MAX_SIZE                     (96 * 1024)
  43 #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE        (512 << 10)
  44 #define CONFIG_SYS_SPI_FLASH_U_BOOT_DST         (0x11000000)
  45 #define CONFIG_SYS_SPI_FLASH_U_BOOT_START       (0x11000000)
  46 #define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS        (96 << 10)
  47 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
  48 #ifdef CONFIG_SPL_BUILD
  49 #define CONFIG_SPL_COMMON_INIT_DDR
  50 #endif
  51 #endif
  52 #endif
  53
  54 #ifdef CONFIG_MTD_RAW_NAND
  55 #ifdef CONFIG_NXP_ESBC
  56 #define CONFIG_SPL_INIT_MINIMAL
  57 #define CONFIG_SPL_FLUSH_IMAGE
  58 #define CONFIG_SPL_TARGET               "u-boot-with-spl.bin"
  59
  60 #define CONFIG_SPL_MAX_SIZE             8192
  61 #define CONFIG_SPL_RELOC_TEXT_BASE      0x00100000
  62 #define CONFIG_SPL_RELOC_STACK          0x00100000
  63 #define CONFIG_SYS_NAND_U_BOOT_SIZE     ((768 << 10) - 0x2000)
  64 #define CONFIG_SYS_NAND_U_BOOT_DST      (0x00200000 - CONFIG_SPL_MAX_SIZE)
  65 #define CONFIG_SYS_NAND_U_BOOT_START    0x00200000
  66 #define CONFIG_SYS_NAND_U_BOOT_OFFS     0
  67 #else
  68 #ifdef CONFIG_TPL_BUILD
  69 #define CONFIG_SPL_FLUSH_IMAGE
  70 #define CONFIG_SPL_NAND_INIT
  71 #define CONFIG_SPL_COMMON_INIT_DDR
  72 #define CONFIG_SPL_MAX_SIZE             (128 << 10)
  73 #define CONFIG_TPL_TEXT_BASE            0xD0001000
  74 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
  75 #define CONFIG_SYS_NAND_U_BOOT_SIZE     (576 << 10)
  76 #define CONFIG_SYS_NAND_U_BOOT_DST      (0x11000000)
  77 #define CONFIG_SYS_NAND_U_BOOT_START    (0x11000000)
  78 #define CONFIG_SYS_NAND_U_BOOT_OFFS     ((128 + 128) << 10)
  79 #elif defined(CONFIG_SPL_BUILD)
  80 #define CONFIG_SPL_INIT_MINIMAL
  81 #define CONFIG_SPL_NAND_MINIMAL
  82 #define CONFIG_SPL_FLUSH_IMAGE
  83 #define CONFIG_SPL_MAX_SIZE             8192
  84 #define CONFIG_SYS_NAND_U_BOOT_SIZE     (128 << 10)
  85 #define CONFIG_SYS_NAND_U_BOOT_DST      0xD0000000
  86 #define CONFIG_SYS_NAND_U_BOOT_START    0xD0000000
  87 #define CONFIG_SYS_NAND_U_BOOT_OFFS     (128 << 10)
  88 #endif
  89 #define CONFIG_SPL_PAD_TO       0x20000
  90 #define CONFIG_TPL_PAD_TO       0x20000
  91 #define CONFIG_SPL_TARGET       "u-boot-with-spl.bin"
  92 #endif
  93 #endif
  94
  95 #ifdef CONFIG_NAND_SECBOOT      /* NAND Boot */
  96 #define CONFIG_RAMBOOT_NAND
  97 #define CONFIG_RESET_VECTOR_ADDRESS     0x110bfffc
  98 #endif
  99
 100 #ifndef CONFIG_RESET_VECTOR_ADDRESS
 101 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
 102 #endif
 103
 104 #ifdef CONFIG_TPL_BUILD
 105 #define CONFIG_SYS_MONITOR_BASE CONFIG_TPL_TEXT_BASE
 106 #elif defined(CONFIG_SPL_BUILD)
 107 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
 108 #else
 109 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
 110 #endif
 111
 112 /* High Level Configuration Options */
 113
 114 #if defined(CONFIG_PCI)
 115 #define CONFIG_PCIE1                    /* PCIE controller 1 (slot 1) */
 116 #define CONFIG_PCIE2                    /* PCIE controller 2 (slot 2) */
 117
 118 /*
 119  * PCI Windows
 120  * Memory space is mapped 1-1, but I/O space must start from 0.
 121  */
 122 /* controller 1, Slot 1, tgtid 1, Base address a000 */
 123 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
 124 #ifdef CONFIG_PHYS_64BIT
 125 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
 126 #else
 127 #define CONFIG_SYS_PCIE1_MEM_PHYS       0x80000000
 128 #endif
 129 #define CONFIG_SYS_PCIE1_IO_VIRT        0xffc00000
 130 #ifdef CONFIG_PHYS_64BIT
 131 #define CONFIG_SYS_PCIE1_IO_PHYS        0xfffc00000ull
 132 #else
 133 #define CONFIG_SYS_PCIE1_IO_PHYS        0xffc00000
 134 #endif
 135
 136 /* controller 2, Slot 2, tgtid 2, Base address 9000 */
 137 #define CONFIG_SYS_PCIE2_MEM_VIRT       0xa0000000
 138 #ifdef CONFIG_PHYS_64BIT
 139 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc20000000ull
 140 #else
 141 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xa0000000
 142 #endif
 143 #define CONFIG_SYS_PCIE2_IO_VIRT        0xffc10000
 144 #ifdef CONFIG_PHYS_64BIT
 145 #define CONFIG_SYS_PCIE2_IO_PHYS        0xfffc10000ull
 146 #else
 147 #define CONFIG_SYS_PCIE2_IO_PHYS        0xffc10000
 148 #endif
 149
 150 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 151 #endif
 152
 153 #define CONFIG_SYS_CLK_FREQ     66666666 /* SYSCLK for P1010 RDB */
 154
 155 #define CONFIG_HWCONFIG
 156 /*
 157  * These can be toggled for performance analysis, otherwise use default.
 158  */
 159 #define CONFIG_L2_CACHE                 /* toggle L2 cache */
 160 #define CONFIG_BTB                      /* toggle branch predition */
 161
 162
 163 #define CONFIG_ENABLE_36BIT_PHYS
 164
 165 /* DDR Setup */
 166 #define CONFIG_SYS_DDR_RAW_TIMING
 167 #define CONFIG_SYS_SPD_BUS_NUM          1
 168 #define SPD_EEPROM_ADDRESS              0x52
 169
 170 #define CONFIG_MEM_INIT_VALUE           0xDeadBeef
 171
 172 #ifndef __ASSEMBLY__
 173 extern unsigned long get_sdram_size(void);
 174 #endif
 175 #define CONFIG_SYS_SDRAM_SIZE           get_sdram_size() /* DDR size */
 176 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 177 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 178
 179 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 180 #define CONFIG_CHIP_SELECTS_PER_CTRL    1
 181
 182 /* DDR3 Controller Settings */
 183 #define CONFIG_SYS_DDR_CS0_BNDS         0x0000003f
 184 #define CONFIG_SYS_DDR_CS0_CONFIG       0x80014302
 185 #define CONFIG_SYS_DDR_CS0_CONFIG_2     0x00000000
 186 #define CONFIG_SYS_DDR_DATA_INIT        0xdeadbeef
 187 #define CONFIG_SYS_DDR_INIT_ADDR        0x00000000
 188 #define CONFIG_SYS_DDR_INIT_EXT_ADDR    0x00000000
 189 #define CONFIG_SYS_DDR_MODE_CONTROL     0x00000000
 190 #define CONFIG_SYS_DDR_ZQ_CONTROL       0x89080600
 191 #define CONFIG_SYS_DDR_SR_CNTR          0x00000000
 192 #define CONFIG_SYS_DDR_RCW_1            0x00000000
 193 #define CONFIG_SYS_DDR_RCW_2            0x00000000
 194 #define CONFIG_SYS_DDR_CONTROL          0xc70c0008      /* Type = DDR3  */
 195 #define CONFIG_SYS_DDR_CONTROL_2        0x24401000
 196 #define CONFIG_SYS_DDR_TIMING_4         0x00000001
 197 #define CONFIG_SYS_DDR_TIMING_5         0x03402400
 198
 199 #define CONFIG_SYS_DDR_TIMING_3_800     0x00030000
 200 #define CONFIG_SYS_DDR_TIMING_0_800     0x00110104
 201 #define CONFIG_SYS_DDR_TIMING_1_800     0x6f6b8644
 202 #define CONFIG_SYS_DDR_TIMING_2_800     0x0FA888CF
 203 #define CONFIG_SYS_DDR_CLK_CTRL_800     0x03000000
 204 #define CONFIG_SYS_DDR_MODE_1_800       0x00441420
 205 #define CONFIG_SYS_DDR_MODE_2_800       0x00000000
 206 #define CONFIG_SYS_DDR_INTERVAL_800     0x0C300100
 207 #define CONFIG_SYS_DDR_WRLVL_CONTROL_800 0x8675f608
 208
 209 /* settings for DDR3 at 667MT/s */
 210 #define CONFIG_SYS_DDR_TIMING_3_667             0x00010000
 211 #define CONFIG_SYS_DDR_TIMING_0_667             0x00110004
 212 #define CONFIG_SYS_DDR_TIMING_1_667             0x5d59e544
 213 #define CONFIG_SYS_DDR_TIMING_2_667             0x0FA890CD
 214 #define CONFIG_SYS_DDR_CLK_CTRL_667             0x03000000
 215 #define CONFIG_SYS_DDR_MODE_1_667               0x00441210
 216 #define CONFIG_SYS_DDR_MODE_2_667               0x00000000
 217 #define CONFIG_SYS_DDR_INTERVAL_667             0x0a280000
 218 #define CONFIG_SYS_DDR_WRLVL_CONTROL_667        0x8675F608
 219
 220 #define CONFIG_SYS_CCSRBAR                      0xffe00000
 221 #define CONFIG_SYS_CCSRBAR_PHYS_LOW             CONFIG_SYS_CCSRBAR
 222
 223 /* Don't relocate CCSRBAR while in NAND_SPL */
 224 #ifdef CONFIG_SPL_BUILD
 225 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
 226 #endif
 227
 228 /*
 229  * Memory map
 230  *
 231  * 0x0000_0000  0x3fff_ffff     DDR                     1G cacheable
 232  * 0x8000_0000  0xbfff_ffff     PCI Express Mem         1.5G non-cacheable
 233  * 0xffc0_0000  0xffc3_ffff     PCI IO range            256k non-cacheable
 234  *
 235  * Localbus non-cacheable
 236  * 0xff80_0000  0xff8f_ffff     NAND Flash              1M non-cacheable
 237  * 0xffb0_0000  0xffbf_ffff     Board CPLD              1M non-cacheable
 238  * 0xffd0_0000  0xffd0_3fff     L1 for stack            16K Cacheable TLB0
 239  * 0xffe0_0000  0xffef_ffff     CCSR                    1M non-cacheable
 240  */
 241
 242 /*
 243  * IFC Definitions
 244  */
 245 /* NOR Flash on IFC */
 246
 247 #define CONFIG_SYS_FLASH_BASE           0xee000000
 248 #define CONFIG_SYS_MAX_FLASH_SECT       256     /* 32M */
 249
 250 #ifdef CONFIG_PHYS_64BIT
 251 #define CONFIG_SYS_FLASH_BASE_PHYS      (0xf00000000ull | CONFIG_SYS_FLASH_BASE)
 252 #else
 253 #define CONFIG_SYS_FLASH_BASE_PHYS      CONFIG_SYS_FLASH_BASE
 254 #endif
 255
 256 #define CONFIG_SYS_NOR_CSPR     (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
 257                                 CSPR_PORT_SIZE_16 | \
 258                                 CSPR_MSEL_NOR | \
 259                                 CSPR_V)
 260 #define CONFIG_SYS_NOR_AMASK    IFC_AMASK(32*1024*1024)
 261 #define CONFIG_SYS_NOR_CSOR     CSOR_NOR_ADM_SHIFT(7)
 262 /* NOR Flash Timing Params */
 263 #define CONFIG_SYS_NOR_FTIM0    FTIM0_NOR_TACSE(0x4) | \
 264                                 FTIM0_NOR_TEADC(0x5) | \
 265                                 FTIM0_NOR_TEAHC(0x5)
 266 #define CONFIG_SYS_NOR_FTIM1    FTIM1_NOR_TACO(0x1e) | \
 267                                 FTIM1_NOR_TRAD_NOR(0x0f)
 268 #define CONFIG_SYS_NOR_FTIM2    FTIM2_NOR_TCS(0x4) | \
 269                                 FTIM2_NOR_TCH(0x4) | \
 270                                 FTIM2_NOR_TWP(0x1c)
 271 #define CONFIG_SYS_NOR_FTIM3    0x0
 272
 273 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS}
 274 #define CONFIG_SYS_FLASH_QUIET_TEST
 275 #define CONFIG_FLASH_SHOW_PROGRESS      45      /* count down from 45/5: 9..1 */
 276 #define CONFIG_SYS_MAX_FLASH_BANKS      1       /* number of banks */
 277
 278 #undef CONFIG_SYS_FLASH_CHECKSUM
 279 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 280 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 281
 282 /* CFI for NOR Flash */
 283 #define CONFIG_SYS_FLASH_EMPTY_INFO
 284
 285 /* NAND Flash on IFC */
 286 #define CONFIG_SYS_NAND_BASE            0xff800000
 287 #ifdef CONFIG_PHYS_64BIT
 288 #define CONFIG_SYS_NAND_BASE_PHYS       0xfff800000ull
 289 #else
 290 #define CONFIG_SYS_NAND_BASE_PHYS       CONFIG_SYS_NAND_BASE
 291 #endif
 292
 293 #define CONFIG_MTD_PARTITION
 294
 295 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 296                                 | CSPR_PORT_SIZE_8      \
 297                                 | CSPR_MSEL_NAND        \
 298                                 | CSPR_V)
 299 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64*1024)
 300
 301 #if defined(CONFIG_TARGET_P1010RDB_PA)
 302 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 303                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 304                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
 305                                 | CSOR_NAND_RAL_2       /* RAL = 2 Bytes */ \
 306                                 | CSOR_NAND_PGS_512     /* Page Size = 512b */ \
 307                                 | CSOR_NAND_SPRZ_16     /* Spare size = 16 */ \
 308                                 | CSOR_NAND_PB(32))     /* 32 Pages Per Block */
 309
 310 #elif defined(CONFIG_TARGET_P1010RDB_PB)
 311 #define CONFIG_SYS_NAND_CSOR   (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 312                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 313                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
 314                                 | CSOR_NAND_RAL_3       /* RAL = 3Byes */ \
 315                                 | CSOR_NAND_PGS_4K      /* Page Size = 4K */ \
 316                                 | CSOR_NAND_SPRZ_224    /* Spare size = 224 */ \
 317                                 | CSOR_NAND_PB(128))  /*Pages Per Block = 128 */
 318 #endif
 319
 320 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
 321 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 322
 323 #if defined(CONFIG_TARGET_P1010RDB_PA)
 324 /* NAND Flash Timing Params */
 325 #define CONFIG_SYS_NAND_FTIM0           FTIM0_NAND_TCCST(0x01) | \
 326                                         FTIM0_NAND_TWP(0x0C)   | \
 327                                         FTIM0_NAND_TWCHT(0x04) | \
 328                                         FTIM0_NAND_TWH(0x05)
 329 #define CONFIG_SYS_NAND_FTIM1           FTIM1_NAND_TADLE(0x1d) | \
 330                                         FTIM1_NAND_TWBE(0x1d)  | \
 331                                         FTIM1_NAND_TRR(0x07)   | \
 332                                         FTIM1_NAND_TRP(0x0c)
 333 #define CONFIG_SYS_NAND_FTIM2           FTIM2_NAND_TRAD(0x0c) | \
 334                                         FTIM2_NAND_TREH(0x05) | \
 335                                         FTIM2_NAND_TWHRE(0x0f)
 336 #define CONFIG_SYS_NAND_FTIM3           FTIM3_NAND_TWW(0x04)
 337
 338 #elif defined(CONFIG_TARGET_P1010RDB_PB)
 339 /* support MT29F16G08ABABAWP 4k-pagesize 2G-bytes NAND */
 340 /* ONFI NAND Flash mode0 Timing Params */
 341 #define CONFIG_SYS_NAND_FTIM0  (FTIM0_NAND_TCCST(0x07)| \
 342                                         FTIM0_NAND_TWP(0x18)   | \
 343                                         FTIM0_NAND_TWCHT(0x07) | \
 344                                         FTIM0_NAND_TWH(0x0a))
 345 #define CONFIG_SYS_NAND_FTIM1  (FTIM1_NAND_TADLE(0x32)| \
 346                                         FTIM1_NAND_TWBE(0x39)  | \
 347                                         FTIM1_NAND_TRR(0x0e)   | \
 348                                         FTIM1_NAND_TRP(0x18))
 349 #define CONFIG_SYS_NAND_FTIM2  (FTIM2_NAND_TRAD(0x0f) | \
 350                                         FTIM2_NAND_TREH(0x0a)  | \
 351                                         FTIM2_NAND_TWHRE(0x1e))
 352 #define CONFIG_SYS_NAND_FTIM3   0x0
 353 #endif
 354
 355 #define CONFIG_SYS_NAND_DDR_LAW         11
 356
 357 /* Set up IFC registers for boot location NOR/NAND */
 358 #if defined(CONFIG_MTD_RAW_NAND) || defined(CONFIG_NAND_SECBOOT)
 359 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
 360 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
 361 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
 362 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
 363 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
 364 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
 365 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
 366 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR_CSPR
 367 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
 368 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 369 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 370 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 371 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 372 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 373 #else
 374 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR_CSPR
 375 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 376 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 377 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 378 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 379 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 380 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 381 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NAND_CSPR
 382 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NAND_AMASK
 383 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NAND_CSOR
 384 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NAND_FTIM0
 385 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NAND_FTIM1
 386 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NAND_FTIM2
 387 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NAND_FTIM3
 388 #endif
 389
 390 /* CPLD on IFC */
 391 #define CONFIG_SYS_CPLD_BASE            0xffb00000
 392
 393 #ifdef CONFIG_PHYS_64BIT
 394 #define CONFIG_SYS_CPLD_BASE_PHYS       0xfffb00000ull
 395 #else
 396 #define CONFIG_SYS_CPLD_BASE_PHYS       CONFIG_SYS_CPLD_BASE
 397 #endif
 398
 399 #define CONFIG_SYS_CSPR3        (CSPR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE_PHYS) \
 400                                 | CSPR_PORT_SIZE_8 \
 401                                 | CSPR_MSEL_GPCM \
 402                                 | CSPR_V)
 403 #define CONFIG_SYS_AMASK3               IFC_AMASK(64*1024)
 404 #define CONFIG_SYS_CSOR3                0x0
 405 /* CPLD Timing parameters for IFC CS3 */
 406 #define CONFIG_SYS_CS3_FTIM0            (FTIM0_GPCM_TACSE(0x0e) | \
 407                                         FTIM0_GPCM_TEADC(0x0e) | \
 408                                         FTIM0_GPCM_TEAHC(0x0e))
 409 #define CONFIG_SYS_CS3_FTIM1            (FTIM1_GPCM_TACO(0x0e) | \
 410                                         FTIM1_GPCM_TRAD(0x1f))
 411 #define CONFIG_SYS_CS3_FTIM2            (FTIM2_GPCM_TCS(0x0e) | \
 412                                         FTIM2_GPCM_TCH(0x8) | \
 413                                         FTIM2_GPCM_TWP(0x1f))
 414 #define CONFIG_SYS_CS3_FTIM3            0x0
 415
 416 #if defined(CONFIG_RAMBOOT_SDCARD) || defined(CONFIG_RAMBOOT_SPIFLASH) || \
 417         defined(CONFIG_RAMBOOT_NAND)
 418 #define CONFIG_SYS_RAMBOOT
 419 #else
 420 #undef CONFIG_SYS_RAMBOOT
 421 #endif
 422
 423 #ifdef CONFIG_SYS_FSL_ERRATUM_IFC_A003399
 424 #if !defined(CONFIG_SPL) && !defined(CONFIG_SYS_RAMBOOT)
 425 #define CONFIG_A003399_NOR_WORKAROUND
 426 #endif
 427 #endif
 428
 429 #define CONFIG_SYS_INIT_RAM_LOCK
 430 #define CONFIG_SYS_INIT_RAM_ADDR        0xffd00000 /* stack in RAM */
 431 #define CONFIG_SYS_INIT_RAM_SIZE        0x00004000 /* End of used area in RAM */
 432
 433 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE \
 434                                                 - GENERATED_GBL_DATA_SIZE)
 435 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 436
 437 #define CONFIG_SYS_MONITOR_LEN          (768 * 1024)
 438
 439 /*
 440  * Config the L2 Cache as L2 SRAM
 441  */
 442 #if defined(CONFIG_SPL_BUILD)
 443 #if defined(CONFIG_SDCARD) || defined(CONFIG_SPIFLASH)
 444 #define CONFIG_SYS_INIT_L2_ADDR         0xD0000000
 445 #define CONFIG_SYS_INIT_L2_ADDR_PHYS    CONFIG_SYS_INIT_L2_ADDR
 446 #define CONFIG_SYS_L2_SIZE              (256 << 10)
 447 #define CONFIG_SYS_INIT_L2_END  (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
 448 #define CONFIG_SPL_RELOC_TEXT_BASE      0xD0001000
 449 #define CONFIG_SPL_RELOC_STACK          (CONFIG_SYS_INIT_L2_ADDR + 112 * 1024)
 450 #define CONFIG_SPL_RELOC_MALLOC_ADDR    (CONFIG_SYS_INIT_L2_ADDR + 128 * 1024)
 451 #define CONFIG_SPL_RELOC_MALLOC_SIZE    (128 << 10)
 452 #define CONFIG_SPL_GD_ADDR              (CONFIG_SYS_INIT_L2_ADDR + 96 * 1024)
 453 #elif defined(CONFIG_MTD_RAW_NAND)
 454 #ifdef CONFIG_TPL_BUILD
 455 #define CONFIG_SYS_INIT_L2_ADDR         0xD0000000
 456 #define CONFIG_SYS_INIT_L2_ADDR_PHYS    CONFIG_SYS_INIT_L2_ADDR
 457 #define CONFIG_SYS_L2_SIZE              (256 << 10)
 458 #define CONFIG_SYS_INIT_L2_END  (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
 459 #define CONFIG_SPL_RELOC_TEXT_BASE      0xD0001000
 460 #define CONFIG_SPL_RELOC_STACK          (CONFIG_SYS_INIT_L2_ADDR + 192 * 1024)
 461 #define CONFIG_SPL_RELOC_MALLOC_ADDR    (CONFIG_SYS_INIT_L2_ADDR + 208 * 1024)
 462 #define CONFIG_SPL_RELOC_MALLOC_SIZE    (48 << 10)
 463 #define CONFIG_SPL_GD_ADDR              (CONFIG_SYS_INIT_L2_ADDR + 176 * 1024)
 464 #else
 465 #define CONFIG_SYS_INIT_L2_ADDR         0xD0000000
 466 #define CONFIG_SYS_INIT_L2_ADDR_PHYS    CONFIG_SYS_INIT_L2_ADDR
 467 #define CONFIG_SYS_L2_SIZE              (256 << 10)
 468 #define CONFIG_SYS_INIT_L2_END  (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
 469 #define CONFIG_SPL_RELOC_TEXT_BASE      (CONFIG_SYS_INIT_L2_END - 0x3000)
 470 #define CONFIG_SPL_RELOC_STACK          ((CONFIG_SYS_INIT_L2_END - 1) & ~0xF)
 471 #endif
 472 #endif
 473 #endif
 474
 475 /* Serial Port */
 476 #undef  CONFIG_SERIAL_SOFTWARE_FIFO
 477 #define CONFIG_SYS_NS16550_SERIAL
 478 #define CONFIG_SYS_NS16550_REG_SIZE     1
 479 #define CONFIG_SYS_NS16550_CLK          get_bus_freq(0)
 480 #if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_INIT_MINIMAL)
 481 #define CONFIG_NS16550_MIN_FUNCTIONS
 482 #endif
 483
 484 #define CONFIG_SYS_BAUDRATE_TABLE       \
 485         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 486
 487 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500)
 488 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600)
 489
 490 /* I2C */
 491 #define I2C_PCA9557_ADDR1               0x18
 492 #define I2C_PCA9557_ADDR2               0x19
 493 #define I2C_PCA9557_BUS_NUM             0
 494
 495 /* I2C EEPROM */
 496 #if defined(CONFIG_TARGET_P1010RDB_PB)
 497 #ifdef CONFIG_ID_EEPROM
 498 #define CONFIG_SYS_I2C_EEPROM_NXID
 499 #endif
 500 #define CONFIG_SYS_EEPROM_BUS_NUM       0
 501 #define MAX_NUM_PORTS                   9 /* for 128Bytes EEPROM */
 502 #endif
 503 /* enable read and write access to EEPROM */
 504
 505 /* RTC */
 506 #define CONFIG_RTC_PT7C4338
 507 #define CONFIG_SYS_I2C_RTC_ADDR 0x68
 508
 509 /*
 510  * SPI interface will not be available in case of NAND boot SPI CS0 will be
 511  * used for SLIC
 512  */
 513 #if !defined(CONFIG_MTD_RAW_NAND) || !defined(CONFIG_NAND_SECBOOT)
 514 /* eSPI - Enhanced SPI */
 515 #endif
 516
 517 #if defined(CONFIG_TSEC_ENET)
 518 #define CONFIG_MII_DEFAULT_TSEC 1       /* Allow unregistered phys */
 519 #define CONFIG_TSEC1    1
 520 #define CONFIG_TSEC1_NAME       "eTSEC1"
 521 #define CONFIG_TSEC2    1
 522 #define CONFIG_TSEC2_NAME       "eTSEC2"
 523 #define CONFIG_TSEC3    1
 524 #define CONFIG_TSEC3_NAME       "eTSEC3"
 525
 526 #define TSEC1_PHY_ADDR          1
 527 #define TSEC2_PHY_ADDR          0
 528 #define TSEC3_PHY_ADDR          2
 529
 530 #define TSEC1_FLAGS             (TSEC_GIGABIT | TSEC_REDUCED)
 531 #define TSEC2_FLAGS             (TSEC_GIGABIT | TSEC_REDUCED)
 532 #define TSEC3_FLAGS             (TSEC_GIGABIT | TSEC_REDUCED)
 533
 534 #define TSEC1_PHYIDX            0
 535 #define TSEC2_PHYIDX            0
 536 #define TSEC3_PHYIDX            0
 537
 538 #define CONFIG_ETHPRIME         "eTSEC1"
 539
 540 /* TBI PHY configuration for SGMII mode */
 541 #define CONFIG_TSEC_TBICR_SETTINGS ( \
 542                 TBICR_PHY_RESET \
 543                 | TBICR_ANEG_ENABLE \
 544                 | TBICR_FULL_DUPLEX \
 545                 | TBICR_SPEED1_SET \
 546                 )
 547
 548 #endif  /* CONFIG_TSEC_ENET */
 549
 550 /* SATA */
 551 #define CONFIG_FSL_SATA_V2
 552
 553 #ifdef CONFIG_FSL_SATA
 554 #define CONFIG_SYS_SATA_MAX_DEVICE      2
 555 #define CONFIG_SATA1
 556 #define CONFIG_SYS_SATA1                CONFIG_SYS_MPC85xx_SATA1_ADDR
 557 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
 558 #define CONFIG_SATA2
 559 #define CONFIG_SYS_SATA2                CONFIG_SYS_MPC85xx_SATA2_ADDR
 560 #define CONFIG_SYS_SATA2_FLAGS          FLAGS_DMA
 561
 562 #define CONFIG_LBA48
 563 #endif /* #ifdef CONFIG_FSL_SATA  */
 564
 565 #ifdef CONFIG_MMC
 566 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 567 #endif
 568
 569 #define CONFIG_HAS_FSL_DR_USB
 570
 571 #if defined(CONFIG_HAS_FSL_DR_USB)
 572 #ifdef CONFIG_USB_EHCI_HCD
 573 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 574 #endif
 575 #endif
 576
 577 /*
 578  * Environment
 579  */
 580 #if defined(CONFIG_SDCARD)
 581 #define CONFIG_FSL_FIXED_MMC_LOCATION
 582 #elif defined(CONFIG_MTD_RAW_NAND)
 583 #ifdef CONFIG_TPL_BUILD
 584 #define SPL_ENV_ADDR            (CONFIG_SYS_INIT_L2_ADDR + (160 << 10))
 585 #else
 586 #if defined(CONFIG_TARGET_P1010RDB_PA)
 587 #define CONFIG_ENV_RANGE        (3 * CONFIG_ENV_SIZE) /* 3*16=48K for env */
 588 #elif defined(CONFIG_TARGET_P1010RDB_PB)
 589 #define CONFIG_ENV_RANGE        (32 * CONFIG_ENV_SIZE) /* new block size 512K */
 590 #endif
 591 #endif
 592 #endif
 593
 594 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
 595 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 596
 597 #if defined(CONFIG_MMC) || defined(CONFIG_USB_EHCI_HCD) \
 598                  || defined(CONFIG_FSL_SATA)
 599 #endif
 600
 601 /*
 602  * Miscellaneous configurable options
 603  */
 604
 605 /*
 606  * For booting Linux, the board info and command line data
 607  * have to be in the first 64 MB of memory, since this is
 608  * the maximum mapped by the Linux kernel during initialization.
 609  */
 610 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20) /* Initial Memory map for Linux */
 611 #define CONFIG_SYS_BOOTM_LEN    (64 << 20) /* Increase max gunzip size */
 612
 613 /*
 614  * Environment Configuration
 615  */
 616
 617 #if defined(CONFIG_TSEC_ENET)
 618 #define CONFIG_HAS_ETH0
 619 #define CONFIG_HAS_ETH1
 620 #define CONFIG_HAS_ETH2
 621 #endif
 622
 623 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 624 #define CONFIG_BOOTFILE         "uImage"
 625 #define CONFIG_UBOOTPATH        u-boot.bin/* U-Boot image on TFTP server */
 626
 627 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 628         "hwconfig=" __stringify(CONFIG_DEF_HWCONFIG)  "\0"      \
 629         "netdev=eth0\0"                                         \
 630         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"             \
 631         "loadaddr=1000000\0"                    \
 632         "consoledev=ttyS0\0"                            \
 633         "ramdiskaddr=2000000\0"                 \
 634         "ramdiskfile=rootfs.ext2.gz.uboot\0"            \
 635         "fdtaddr=1e00000\0"                             \
 636         "fdtfile=p1010rdb.dtb\0"                \
 637         "bdev=sda1\0"   \
 638         "hwconfig=usb1:dr_mode=host,phy_type=utmi\0"    \
 639         "othbootargs=ramdisk_size=600000\0" \
 640         "usbfatboot=setenv bootargs root=/dev/ram rw "  \
 641         "console=$consoledev,$baudrate $othbootargs; "  \
 642         "usb start;"                    \
 643         "fatload usb 0:2 $loadaddr $bootfile;"          \
 644         "fatload usb 0:2 $fdtaddr $fdtfile;"    \
 645         "fatload usb 0:2 $ramdiskaddr $ramdiskfile;"    \
 646         "bootm $loadaddr $ramdiskaddr $fdtaddr\0"               \
 647         "usbext2boot=setenv bootargs root=/dev/ram rw " \
 648         "console=$consoledev,$baudrate $othbootargs; "  \
 649         "usb start;"                    \
 650         "ext2load usb 0:4 $loadaddr $bootfile;"         \
 651         "ext2load usb 0:4 $fdtaddr $fdtfile;"   \
 652         "ext2load usb 0:4 $ramdiskaddr $ramdiskfile;"   \
 653         "bootm $loadaddr $ramdiskaddr $fdtaddr\0"       \
 654         CONFIG_BOOTMODE
 655
 656 #if defined(CONFIG_TARGET_P1010RDB_PA)
 657 #define CONFIG_BOOTMODE \
 658         "boot_bank0=i2c dev 0; i2c mw 18 1 f1; i2c mw 18 3 f0;" \
 659         "mw.b ffb00011 0; mw.b ffb00009 0; reset\0" \
 660         "boot_bank1=i2c dev 0; i2c mw 18 1 f1; i2c mw 18 3 f0;" \
 661         "mw.b ffb00011 0; mw.b ffb00009 1; reset\0" \
 662         "boot_nand=i2c dev 0; i2c mw 18 1 f9; i2c mw 18 3 f0;" \
 663         "mw.b ffb00011 0; mw.b ffb00017 1; reset\0"
 664
 665 #elif defined(CONFIG_TARGET_P1010RDB_PB)
 666 #define CONFIG_BOOTMODE \
 667         "boot_bank0=i2c dev 0; i2c mw 18 1 fe; i2c mw 18 3 0;" \
 668         "i2c mw 19 1 2; i2c mw 19 3 e1; reset\0" \
 669         "boot_bank1=i2c dev 0; i2c mw 18 1 fe; i2c mw 18 3 0;" \
 670         "i2c mw 19 1 12; i2c mw 19 3 e1; reset\0" \
 671         "boot_nand=i2c dev 0; i2c mw 18 1 fc; i2c mw 18 3 0;" \
 672         "i2c mw 19 1 8; i2c mw 19 3 f7; reset\0" \
 673         "boot_spi=i2c dev 0; i2c mw 18 1 fa; i2c mw 18 3 0;" \
 674         "i2c mw 19 1 0; i2c mw 19 3 f7; reset\0" \
 675         "boot_sd=i2c dev 0; i2c mw 18 1 f8; i2c mw 18 3 0;" \
 676         "i2c mw 19 1 4; i2c mw 19 3 f3; reset\0"
 677 #endif
 678
 679 #include <asm/fsl_secure_boot.h>
 680
 681 #endif  /* __CONFIG_H */