1 /* SPDX-License-Identifier: GPL-2.0+ */
3 * Copyright 2010-2011 Freescale Semiconductor, Inc.
8 * P010 RDB board configuration file
14 #include <linux/stringify.h>
16 #include <asm/config_mpc85xx.h>
19 #define CONFIG_SYS_MMC_U_BOOT_SIZE (512 << 10)
20 #define CONFIG_SYS_MMC_U_BOOT_DST (0x11000000)
21 #define CONFIG_SYS_MMC_U_BOOT_START (0x11000000)
22 #define CONFIG_SYS_MMC_U_BOOT_OFFS (96 << 10)
25 #ifdef CONFIG_SPIFLASH
26 #ifdef CONFIG_NXP_ESBC
27 #define CONFIG_RAMBOOT_SPIFLASH
28 #define CONFIG_RESET_VECTOR_ADDRESS 0x110bfffc
30 #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE (512 << 10)
31 #define CONFIG_SYS_SPI_FLASH_U_BOOT_DST (0x11000000)
32 #define CONFIG_SYS_SPI_FLASH_U_BOOT_START (0x11000000)
33 #define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS (96 << 10)
37 #ifdef CONFIG_MTD_RAW_NAND
38 #ifdef CONFIG_NXP_ESBC
39 #define CONFIG_SYS_NAND_U_BOOT_SIZE ((768 << 10) - 0x2000)
40 #define CONFIG_SYS_NAND_U_BOOT_DST (0x00200000 - CONFIG_SPL_MAX_SIZE)
41 #define CONFIG_SYS_NAND_U_BOOT_START 0x00200000
43 #ifdef CONFIG_TPL_BUILD
44 #define CONFIG_SYS_NAND_U_BOOT_SIZE (576 << 10)
45 #define CONFIG_SYS_NAND_U_BOOT_DST (0x11000000)
46 #define CONFIG_SYS_NAND_U_BOOT_START (0x11000000)
47 #elif defined(CONFIG_SPL_BUILD)
48 #define CONFIG_SYS_NAND_U_BOOT_SIZE (128 << 10)
49 #define CONFIG_SYS_NAND_U_BOOT_DST 0xD0000000
50 #define CONFIG_SYS_NAND_U_BOOT_START 0xD0000000
55 #ifdef CONFIG_NAND_SECBOOT /* NAND Boot */
56 #define CONFIG_RAMBOOT_NAND
57 #define CONFIG_RESET_VECTOR_ADDRESS 0x110bfffc
60 #ifndef CONFIG_RESET_VECTOR_ADDRESS
61 #define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc
64 /* High Level Configuration Options */
66 #if defined(CONFIG_PCI)
67 #define CONFIG_PCIE1 /* PCIE controller 1 (slot 1) */
68 #define CONFIG_PCIE2 /* PCIE controller 2 (slot 2) */
72 * Memory space is mapped 1-1, but I/O space must start from 0.
74 /* controller 1, Slot 1, tgtid 1, Base address a000 */
75 #define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000
76 #ifdef CONFIG_PHYS_64BIT
77 #define CONFIG_SYS_PCIE1_MEM_PHYS 0xc00000000ull
79 #define CONFIG_SYS_PCIE1_MEM_PHYS 0x80000000
81 #define CONFIG_SYS_PCIE1_IO_VIRT 0xffc00000
82 #ifdef CONFIG_PHYS_64BIT
83 #define CONFIG_SYS_PCIE1_IO_PHYS 0xfffc00000ull
85 #define CONFIG_SYS_PCIE1_IO_PHYS 0xffc00000
88 /* controller 2, Slot 2, tgtid 2, Base address 9000 */
89 #define CONFIG_SYS_PCIE2_MEM_VIRT 0xa0000000
90 #ifdef CONFIG_PHYS_64BIT
91 #define CONFIG_SYS_PCIE2_MEM_PHYS 0xc20000000ull
93 #define CONFIG_SYS_PCIE2_MEM_PHYS 0xa0000000
95 #define CONFIG_SYS_PCIE2_IO_VIRT 0xffc10000
96 #ifdef CONFIG_PHYS_64BIT
97 #define CONFIG_SYS_PCIE2_IO_PHYS 0xfffc10000ull
99 #define CONFIG_SYS_PCIE2_IO_PHYS 0xffc10000
102 #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
105 #define CONFIG_HWCONFIG
107 * These can be toggled for performance analysis, otherwise use default.
109 #define CONFIG_L2_CACHE /* toggle L2 cache */
112 #define CONFIG_ENABLE_36BIT_PHYS
115 #define CONFIG_SYS_DDR_RAW_TIMING
116 #define CONFIG_SYS_SPD_BUS_NUM 1
117 #define SPD_EEPROM_ADDRESS 0x52
119 #define CONFIG_MEM_INIT_VALUE 0xDeadBeef
122 extern unsigned long get_sdram_size(void);
124 #define CONFIG_SYS_SDRAM_SIZE get_sdram_size() /* DDR size */
125 #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000
126 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE
128 /* DDR3 Controller Settings */
129 #define CONFIG_SYS_DDR_CS0_BNDS 0x0000003f
130 #define CONFIG_SYS_DDR_CS0_CONFIG 0x80014302
131 #define CONFIG_SYS_DDR_CS0_CONFIG_2 0x00000000
132 #define CONFIG_SYS_DDR_DATA_INIT 0xdeadbeef
133 #define CONFIG_SYS_DDR_INIT_ADDR 0x00000000
134 #define CONFIG_SYS_DDR_INIT_EXT_ADDR 0x00000000
135 #define CONFIG_SYS_DDR_MODE_CONTROL 0x00000000
136 #define CONFIG_SYS_DDR_ZQ_CONTROL 0x89080600
137 #define CONFIG_SYS_DDR_SR_CNTR 0x00000000
138 #define CONFIG_SYS_DDR_RCW_1 0x00000000
139 #define CONFIG_SYS_DDR_RCW_2 0x00000000
140 #define CONFIG_SYS_DDR_CONTROL 0xc70c0008 /* Type = DDR3 */
141 #define CONFIG_SYS_DDR_CONTROL_2 0x24401000
142 #define CONFIG_SYS_DDR_TIMING_4 0x00000001
143 #define CONFIG_SYS_DDR_TIMING_5 0x03402400
145 #define CONFIG_SYS_DDR_TIMING_3_800 0x00030000
146 #define CONFIG_SYS_DDR_TIMING_0_800 0x00110104
147 #define CONFIG_SYS_DDR_TIMING_1_800 0x6f6b8644
148 #define CONFIG_SYS_DDR_TIMING_2_800 0x0FA888CF
149 #define CONFIG_SYS_DDR_CLK_CTRL_800 0x03000000
150 #define CONFIG_SYS_DDR_MODE_1_800 0x00441420
151 #define CONFIG_SYS_DDR_MODE_2_800 0x00000000
152 #define CONFIG_SYS_DDR_INTERVAL_800 0x0C300100
153 #define CONFIG_SYS_DDR_WRLVL_CONTROL_800 0x8675f608
155 /* settings for DDR3 at 667MT/s */
156 #define CONFIG_SYS_DDR_TIMING_3_667 0x00010000
157 #define CONFIG_SYS_DDR_TIMING_0_667 0x00110004
158 #define CONFIG_SYS_DDR_TIMING_1_667 0x5d59e544
159 #define CONFIG_SYS_DDR_TIMING_2_667 0x0FA890CD
160 #define CONFIG_SYS_DDR_CLK_CTRL_667 0x03000000
161 #define CONFIG_SYS_DDR_MODE_1_667 0x00441210
162 #define CONFIG_SYS_DDR_MODE_2_667 0x00000000
163 #define CONFIG_SYS_DDR_INTERVAL_667 0x0a280000
164 #define CONFIG_SYS_DDR_WRLVL_CONTROL_667 0x8675F608
166 #define CONFIG_SYS_CCSRBAR 0xffe00000
167 #define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR
172 * 0x0000_0000 0x3fff_ffff DDR 1G cacheable
173 * 0x8000_0000 0xbfff_ffff PCI Express Mem 1.5G non-cacheable
174 * 0xffc0_0000 0xffc3_ffff PCI IO range 256k non-cacheable
176 * Localbus non-cacheable
177 * 0xff80_0000 0xff8f_ffff NAND Flash 1M non-cacheable
178 * 0xffb0_0000 0xffbf_ffff Board CPLD 1M non-cacheable
179 * 0xffd0_0000 0xffd0_3fff L1 for stack 16K Cacheable TLB0
180 * 0xffe0_0000 0xffef_ffff CCSR 1M non-cacheable
186 /* NOR Flash on IFC */
188 #define CONFIG_SYS_FLASH_BASE 0xee000000
189 #define CONFIG_SYS_MAX_FLASH_SECT 256 /* 32M */
191 #ifdef CONFIG_PHYS_64BIT
192 #define CONFIG_SYS_FLASH_BASE_PHYS (0xf00000000ull | CONFIG_SYS_FLASH_BASE)
194 #define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE
197 #define CONFIG_SYS_NOR_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
198 CSPR_PORT_SIZE_16 | \
201 #define CONFIG_SYS_NOR_AMASK IFC_AMASK(32*1024*1024)
202 #define CONFIG_SYS_NOR_CSOR CSOR_NOR_ADM_SHIFT(7)
203 /* NOR Flash Timing Params */
204 #define CONFIG_SYS_NOR_FTIM0 FTIM0_NOR_TACSE(0x4) | \
205 FTIM0_NOR_TEADC(0x5) | \
207 #define CONFIG_SYS_NOR_FTIM1 FTIM1_NOR_TACO(0x1e) | \
208 FTIM1_NOR_TRAD_NOR(0x0f)
209 #define CONFIG_SYS_NOR_FTIM2 FTIM2_NOR_TCS(0x4) | \
210 FTIM2_NOR_TCH(0x4) | \
212 #define CONFIG_SYS_NOR_FTIM3 0x0
214 #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS}
215 #define CONFIG_SYS_FLASH_QUIET_TEST
216 #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */
218 #undef CONFIG_SYS_FLASH_CHECKSUM
219 #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
220 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
222 /* CFI for NOR Flash */
223 #define CONFIG_SYS_FLASH_EMPTY_INFO
225 /* NAND Flash on IFC */
226 #define CONFIG_SYS_NAND_BASE 0xff800000
227 #ifdef CONFIG_PHYS_64BIT
228 #define CONFIG_SYS_NAND_BASE_PHYS 0xfff800000ull
230 #define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE
233 #define CONFIG_MTD_PARTITION
235 #define CONFIG_SYS_NAND_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
239 #define CONFIG_SYS_NAND_AMASK IFC_AMASK(64*1024)
241 #if defined(CONFIG_TARGET_P1010RDB_PA)
242 #define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \
243 | CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \
244 | CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \
245 | CSOR_NAND_RAL_2 /* RAL = 2 Bytes */ \
246 | CSOR_NAND_PGS_512 /* Page Size = 512b */ \
247 | CSOR_NAND_SPRZ_16 /* Spare size = 16 */ \
248 | CSOR_NAND_PB(32)) /* 32 Pages Per Block */
250 #elif defined(CONFIG_TARGET_P1010RDB_PB)
251 #define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \
252 | CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \
253 | CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \
254 | CSOR_NAND_RAL_3 /* RAL = 3Byes */ \
255 | CSOR_NAND_PGS_4K /* Page Size = 4K */ \
256 | CSOR_NAND_SPRZ_224 /* Spare size = 224 */ \
257 | CSOR_NAND_PB(128)) /*Pages Per Block = 128 */
260 #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE }
261 #define CONFIG_SYS_MAX_NAND_DEVICE 1
263 #if defined(CONFIG_TARGET_P1010RDB_PA)
264 /* NAND Flash Timing Params */
265 #define CONFIG_SYS_NAND_FTIM0 FTIM0_NAND_TCCST(0x01) | \
266 FTIM0_NAND_TWP(0x0C) | \
267 FTIM0_NAND_TWCHT(0x04) | \
269 #define CONFIG_SYS_NAND_FTIM1 FTIM1_NAND_TADLE(0x1d) | \
270 FTIM1_NAND_TWBE(0x1d) | \
271 FTIM1_NAND_TRR(0x07) | \
273 #define CONFIG_SYS_NAND_FTIM2 FTIM2_NAND_TRAD(0x0c) | \
274 FTIM2_NAND_TREH(0x05) | \
275 FTIM2_NAND_TWHRE(0x0f)
276 #define CONFIG_SYS_NAND_FTIM3 FTIM3_NAND_TWW(0x04)
278 #elif defined(CONFIG_TARGET_P1010RDB_PB)
279 /* support MT29F16G08ABABAWP 4k-pagesize 2G-bytes NAND */
280 /* ONFI NAND Flash mode0 Timing Params */
281 #define CONFIG_SYS_NAND_FTIM0 (FTIM0_NAND_TCCST(0x07)| \
282 FTIM0_NAND_TWP(0x18) | \
283 FTIM0_NAND_TWCHT(0x07) | \
284 FTIM0_NAND_TWH(0x0a))
285 #define CONFIG_SYS_NAND_FTIM1 (FTIM1_NAND_TADLE(0x32)| \
286 FTIM1_NAND_TWBE(0x39) | \
287 FTIM1_NAND_TRR(0x0e) | \
288 FTIM1_NAND_TRP(0x18))
289 #define CONFIG_SYS_NAND_FTIM2 (FTIM2_NAND_TRAD(0x0f) | \
290 FTIM2_NAND_TREH(0x0a) | \
291 FTIM2_NAND_TWHRE(0x1e))
292 #define CONFIG_SYS_NAND_FTIM3 0x0
295 #define CONFIG_SYS_NAND_DDR_LAW 11
297 /* Set up IFC registers for boot location NOR/NAND */
298 #if defined(CONFIG_MTD_RAW_NAND) || defined(CONFIG_NAND_SECBOOT)
299 #define CONFIG_SYS_CSPR0 CONFIG_SYS_NAND_CSPR
300 #define CONFIG_SYS_AMASK0 CONFIG_SYS_NAND_AMASK
301 #define CONFIG_SYS_CSOR0 CONFIG_SYS_NAND_CSOR
302 #define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NAND_FTIM0
303 #define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NAND_FTIM1
304 #define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NAND_FTIM2
305 #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NAND_FTIM3
306 #define CONFIG_SYS_CSPR1 CONFIG_SYS_NOR_CSPR
307 #define CONFIG_SYS_AMASK1 CONFIG_SYS_NOR_AMASK
308 #define CONFIG_SYS_CSOR1 CONFIG_SYS_NOR_CSOR
309 #define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NOR_FTIM0
310 #define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NOR_FTIM1
311 #define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NOR_FTIM2
312 #define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NOR_FTIM3
314 #define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR_CSPR
315 #define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK
316 #define CONFIG_SYS_CSOR0 CONFIG_SYS_NOR_CSOR
317 #define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NOR_FTIM0
318 #define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NOR_FTIM1
319 #define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2
320 #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3
321 #define CONFIG_SYS_CSPR1 CONFIG_SYS_NAND_CSPR
322 #define CONFIG_SYS_AMASK1 CONFIG_SYS_NAND_AMASK
323 #define CONFIG_SYS_CSOR1 CONFIG_SYS_NAND_CSOR
324 #define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NAND_FTIM0
325 #define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NAND_FTIM1
326 #define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NAND_FTIM2
327 #define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NAND_FTIM3
331 #define CONFIG_SYS_CPLD_BASE 0xffb00000
333 #ifdef CONFIG_PHYS_64BIT
334 #define CONFIG_SYS_CPLD_BASE_PHYS 0xfffb00000ull
336 #define CONFIG_SYS_CPLD_BASE_PHYS CONFIG_SYS_CPLD_BASE
339 #define CONFIG_SYS_CSPR3 (CSPR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE_PHYS) \
343 #define CONFIG_SYS_AMASK3 IFC_AMASK(64*1024)
344 #define CONFIG_SYS_CSOR3 0x0
345 /* CPLD Timing parameters for IFC CS3 */
346 #define CONFIG_SYS_CS3_FTIM0 (FTIM0_GPCM_TACSE(0x0e) | \
347 FTIM0_GPCM_TEADC(0x0e) | \
348 FTIM0_GPCM_TEAHC(0x0e))
349 #define CONFIG_SYS_CS3_FTIM1 (FTIM1_GPCM_TACO(0x0e) | \
350 FTIM1_GPCM_TRAD(0x1f))
351 #define CONFIG_SYS_CS3_FTIM2 (FTIM2_GPCM_TCS(0x0e) | \
352 FTIM2_GPCM_TCH(0x8) | \
353 FTIM2_GPCM_TWP(0x1f))
354 #define CONFIG_SYS_CS3_FTIM3 0x0
356 #if defined(CONFIG_RAMBOOT_SDCARD) || defined(CONFIG_RAMBOOT_SPIFLASH) || \
357 defined(CONFIG_RAMBOOT_NAND)
358 #define CONFIG_SYS_RAMBOOT
360 #undef CONFIG_SYS_RAMBOOT
363 #define CONFIG_SYS_INIT_RAM_LOCK
364 #define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 /* stack in RAM */
365 #define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 /* End of used area in RAM */
367 #define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
369 #define CONFIG_SYS_MONITOR_LEN (768 * 1024)
372 * Config the L2 Cache as L2 SRAM
374 #if defined(CONFIG_SPL_BUILD)
375 #if defined(CONFIG_SDCARD) || defined(CONFIG_SPIFLASH)
376 #define CONFIG_SYS_INIT_L2_ADDR 0xD0000000
377 #define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR
378 #define CONFIG_SYS_L2_SIZE (256 << 10)
379 #define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
380 #elif defined(CONFIG_MTD_RAW_NAND)
381 #ifdef CONFIG_TPL_BUILD
382 #define CONFIG_SYS_INIT_L2_ADDR 0xD0000000
383 #define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR
384 #define CONFIG_SYS_L2_SIZE (256 << 10)
385 #define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
387 #define CONFIG_SYS_INIT_L2_ADDR 0xD0000000
388 #define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR
389 #define CONFIG_SYS_L2_SIZE (256 << 10)
390 #define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
396 #undef CONFIG_SERIAL_SOFTWARE_FIFO
397 #define CONFIG_SYS_NS16550_SERIAL
398 #define CONFIG_SYS_NS16550_REG_SIZE 1
399 #define CONFIG_SYS_NS16550_CLK get_bus_freq(0)
400 #if defined(CONFIG_SPL_BUILD) && CONFIG_IS_ENABLED(INIT_MINIMAL)
401 #define CONFIG_NS16550_MIN_FUNCTIONS
404 #define CONFIG_SYS_BAUDRATE_TABLE \
405 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
407 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500)
408 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600)
411 #define I2C_PCA9557_ADDR1 0x18
412 #define I2C_PCA9557_ADDR2 0x19
413 #define I2C_PCA9557_BUS_NUM 0
416 #if defined(CONFIG_TARGET_P1010RDB_PB)
417 #ifdef CONFIG_ID_EEPROM
418 #define CONFIG_SYS_I2C_EEPROM_NXID
420 #define CONFIG_SYS_EEPROM_BUS_NUM 0
421 #define MAX_NUM_PORTS 9 /* for 128Bytes EEPROM */
423 /* enable read and write access to EEPROM */
426 #define CONFIG_RTC_PT7C4338
427 #define CONFIG_SYS_I2C_RTC_ADDR 0x68
430 * SPI interface will not be available in case of NAND boot SPI CS0 will be
433 #if !defined(CONFIG_MTD_RAW_NAND) || !defined(CONFIG_NAND_SECBOOT)
434 /* eSPI - Enhanced SPI */
437 #if defined(CONFIG_TSEC_ENET)
438 #define CONFIG_MII_DEFAULT_TSEC 1 /* Allow unregistered phys */
439 #define CONFIG_TSEC1 1
440 #define CONFIG_TSEC1_NAME "eTSEC1"
441 #define CONFIG_TSEC2 1
442 #define CONFIG_TSEC2_NAME "eTSEC2"
443 #define CONFIG_TSEC3 1
444 #define CONFIG_TSEC3_NAME "eTSEC3"
446 #define TSEC1_PHY_ADDR 1
447 #define TSEC2_PHY_ADDR 0
448 #define TSEC3_PHY_ADDR 2
450 #define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED)
451 #define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED)
452 #define TSEC3_FLAGS (TSEC_GIGABIT | TSEC_REDUCED)
454 #define TSEC1_PHYIDX 0
455 #define TSEC2_PHYIDX 0
456 #define TSEC3_PHYIDX 0
458 /* TBI PHY configuration for SGMII mode */
459 #define CONFIG_TSEC_TBICR_SETTINGS ( \
461 | TBICR_ANEG_ENABLE \
462 | TBICR_FULL_DUPLEX \
466 #endif /* CONFIG_TSEC_ENET */
469 #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR
475 #if defined(CONFIG_SDCARD)
476 #define CONFIG_FSL_FIXED_MMC_LOCATION
477 #elif defined(CONFIG_MTD_RAW_NAND)
478 #ifdef CONFIG_TPL_BUILD
479 #define SPL_ENV_ADDR (CONFIG_SYS_INIT_L2_ADDR + (160 << 10))
483 #define CONFIG_LOADS_ECHO /* echo on for serial download */
484 #define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */
486 #if defined(CONFIG_MMC) || defined(CONFIG_USB_EHCI_HCD) \
487 || defined(CONFIG_FSL_SATA)
491 * Miscellaneous configurable options
495 * For booting Linux, the board info and command line data
496 * have to be in the first 64 MB of memory, since this is
497 * the maximum mapped by the Linux kernel during initialization.
499 #define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory map for Linux */
500 #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */
503 * Environment Configuration
506 #define CONFIG_ROOTPATH "/opt/nfsroot"
507 #define CONFIG_UBOOTPATH u-boot.bin/* U-Boot image on TFTP server */
509 #define CONFIG_EXTRA_ENV_SETTINGS \
510 "hwconfig=" __stringify(CONFIG_DEF_HWCONFIG) "\0" \
512 "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \
513 "loadaddr=1000000\0" \
514 "consoledev=ttyS0\0" \
515 "ramdiskaddr=2000000\0" \
516 "ramdiskfile=rootfs.ext2.gz.uboot\0" \
517 "fdtaddr=1e00000\0" \
518 "fdtfile=p1010rdb.dtb\0" \
520 "hwconfig=usb1:dr_mode=host,phy_type=utmi\0" \
521 "othbootargs=ramdisk_size=600000\0" \
522 "usbfatboot=setenv bootargs root=/dev/ram rw " \
523 "console=$consoledev,$baudrate $othbootargs; " \
525 "fatload usb 0:2 $loadaddr $bootfile;" \
526 "fatload usb 0:2 $fdtaddr $fdtfile;" \
527 "fatload usb 0:2 $ramdiskaddr $ramdiskfile;" \
528 "bootm $loadaddr $ramdiskaddr $fdtaddr\0" \
529 "usbext2boot=setenv bootargs root=/dev/ram rw " \
530 "console=$consoledev,$baudrate $othbootargs; " \
532 "ext2load usb 0:4 $loadaddr $bootfile;" \
533 "ext2load usb 0:4 $fdtaddr $fdtfile;" \
534 "ext2load usb 0:4 $ramdiskaddr $ramdiskfile;" \
535 "bootm $loadaddr $ramdiskaddr $fdtaddr\0" \
538 #if defined(CONFIG_TARGET_P1010RDB_PA)
540 "boot_bank0=i2c dev 0; i2c mw 18 1 f1; i2c mw 18 3 f0;" \
541 "mw.b ffb00011 0; mw.b ffb00009 0; reset\0" \
542 "boot_bank1=i2c dev 0; i2c mw 18 1 f1; i2c mw 18 3 f0;" \
543 "mw.b ffb00011 0; mw.b ffb00009 1; reset\0" \
544 "boot_nand=i2c dev 0; i2c mw 18 1 f9; i2c mw 18 3 f0;" \
545 "mw.b ffb00011 0; mw.b ffb00017 1; reset\0"
547 #elif defined(CONFIG_TARGET_P1010RDB_PB)
549 "boot_bank0=i2c dev 0; i2c mw 18 1 fe; i2c mw 18 3 0;" \
550 "i2c mw 19 1 2; i2c mw 19 3 e1; reset\0" \
551 "boot_bank1=i2c dev 0; i2c mw 18 1 fe; i2c mw 18 3 0;" \
552 "i2c mw 19 1 12; i2c mw 19 3 e1; reset\0" \
553 "boot_nand=i2c dev 0; i2c mw 18 1 fc; i2c mw 18 3 0;" \
554 "i2c mw 19 1 8; i2c mw 19 3 f7; reset\0" \
555 "boot_spi=i2c dev 0; i2c mw 18 1 fa; i2c mw 18 3 0;" \
556 "i2c mw 19 1 0; i2c mw 19 3 f7; reset\0" \
557 "boot_sd=i2c dev 0; i2c mw 18 1 f8; i2c mw 18 3 0;" \
558 "i2c mw 19 1 4; i2c mw 19 3 f3; reset\0"
561 #include <asm/fsl_secure_boot.h>
563 #endif /* __CONFIG_H */