3 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
5 * See file CREDITS for list of people who contributed to this
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public License as
10 * published by the Free Software Foundation; either version 2 of
11 * the License, or (at your option) any later version.
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
25 * Pantelis Antoniou, Intracom S.A., panto@intracom.gr
26 * U-Boot port on NetVia board
33 * High Level Configuration Options
37 #define CONFIG_MPC850 1 /* This is a MPC850 CPU */
38 #define CONFIG_NETVIA 1 /* ...on a NetVia board */
40 #define CONFIG_SYS_TEXT_BASE 0x40000000
42 #if !defined(CONFIG_NETVIA_VERSION) || CONFIG_NETVIA_VERSION == 1
43 #define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */
44 #undef CONFIG_8xx_CONS_SMC2
45 #undef CONFIG_8xx_CONS_NONE
47 #define CONFIG_8xx_CONS_NONE
48 #define CONFIG_MAX3100_SERIAL
51 #define CONFIG_BAUDRATE 115200 /* console baudrate = 115kbps */
53 #define CONFIG_XIN 10000000
54 #define CONFIG_8xx_GCLK_FREQ 80000000
57 #define CONFIG_BOOTDELAY -1 /* autoboot disabled */
59 #define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
62 #undef CONFIG_CLOCKS_IN_MHZ /* clocks NOT passsed to Linux in MHz */
64 #define CONFIG_PREBOOT "echo;echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;echo"
66 #undef CONFIG_BOOTARGS
67 #define CONFIG_BOOTCOMMAND \
69 "setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \
70 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; " \
73 #define CONFIG_LOADS_ECHO 0 /* echo off for serial download */
74 #undef CONFIG_SYS_LOADS_BAUD_CHANGE /* don't allow baudrate change */
76 #undef CONFIG_WATCHDOG /* watchdog disabled */
78 #define CONFIG_STATUS_LED 1 /* Status LED enabled */
80 #if defined(CONFIG_NETVIA_VERSION) && CONFIG_NETVIA_VERSION >= 2
81 #define CONFIG_BOARD_SPECIFIC_LED /* version has board specific leds */
84 #undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */
89 #define CONFIG_BOOTP_SUBNETMASK
90 #define CONFIG_BOOTP_GATEWAY
91 #define CONFIG_BOOTP_HOSTNAME
92 #define CONFIG_BOOTP_BOOTPATH
93 #define CONFIG_BOOTP_BOOTFILESIZE
94 #define CONFIG_BOOTP_NISDOMAIN
97 #undef CONFIG_MAC_PARTITION
98 #undef CONFIG_DOS_PARTITION
100 #define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */
104 * Command line configuration.
106 #include <config_cmd_default.h>
108 #define CONFIG_CMD_DHCP
109 #define CONFIG_CMD_PING
111 #if defined(CONFIG_NETVIA_VERSION) && CONFIG_NETVIA_VERSION >= 2
112 /* #define CONFIG_CMD_NAND */ /* disabled */
116 #define CONFIG_BOARD_EARLY_INIT_F 1
117 #define CONFIG_MISC_INIT_R
120 * Miscellaneous configurable options
122 #define CONFIG_SYS_LONGHELP /* undef to save memory */
123 #define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
124 #if defined(CONFIG_CMD_KGDB)
125 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
127 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
129 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
130 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */
131 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
133 #define CONFIG_SYS_MEMTEST_START 0x0300000 /* memtest works on */
134 #define CONFIG_SYS_MEMTEST_END 0x0700000 /* 3 ... 7 MB in DRAM */
136 #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
138 #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
140 #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
143 * Low Level Configuration Settings
144 * (address mappings, register initial values, etc.)
145 * You should know what you are doing if you make changes here.
147 /*-----------------------------------------------------------------------
148 * Internal Memory Mapped Register
150 #define CONFIG_SYS_IMMR 0xFF000000
152 /*-----------------------------------------------------------------------
153 * Definitions for initial stack pointer and data area (in DPRAM)
155 #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR
156 #define CONFIG_SYS_INIT_RAM_SIZE 0x3000 /* Size of used area in DPRAM */
157 #define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */
158 #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE)
159 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
161 /*-----------------------------------------------------------------------
162 * Start addresses for the final memory configuration
163 * (Set up by the startup code)
164 * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
166 #define CONFIG_SYS_SDRAM_BASE 0x00000000
167 #define CONFIG_SYS_FLASH_BASE 0x40000000
169 #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
171 #define CONFIG_SYS_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */
173 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
174 #define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
177 * For booting Linux, the board info and command line data
178 * have to be in the first 8 MB of memory, since this is
179 * the maximum mapped by the Linux kernel during initialization.
181 #define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
183 /*-----------------------------------------------------------------------
186 #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
187 #define CONFIG_SYS_MAX_FLASH_SECT 8 /* max number of sectors on one chip */
189 #define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
190 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
192 #define CONFIG_ENV_IS_IN_FLASH 1
193 #define CONFIG_ENV_SECT_SIZE 0x10000
195 #define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x60000)
196 #define CONFIG_ENV_OFFSET 0
197 #define CONFIG_ENV_SIZE 0x4000
199 #define CONFIG_ENV_ADDR_REDUND (CONFIG_SYS_FLASH_BASE + 0x70000)
200 #define CONFIG_ENV_OFFSET_REDUND 0
201 #define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
203 /*-----------------------------------------------------------------------
204 * Cache Configuration
206 #define CONFIG_SYS_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
207 #if defined(CONFIG_CMD_KGDB)
208 #define CONFIG_SYS_CACHELINE_SHIFT 4 /* log base 2 of the above value */
211 /*-----------------------------------------------------------------------
212 * SYPCR - System Protection Control 11-9
213 * SYPCR can only be written once after reset!
214 *-----------------------------------------------------------------------
215 * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
217 #if defined(CONFIG_WATCHDOG)
218 #define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
219 SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP)
221 #define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
224 /*-----------------------------------------------------------------------
225 * SIUMCR - SIU Module Configuration 11-6
226 *-----------------------------------------------------------------------
227 * PCMCIA config., multi-function pin tri-state
229 #ifndef CONFIG_CAN_DRIVER
230 #define CONFIG_SYS_SIUMCR (SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01 | SIUMCR_FRC)
231 #else /* we must activate GPL5 in the SIUMCR for CAN */
232 #define CONFIG_SYS_SIUMCR (SIUMCR_DBGC11 | SIUMCR_DBPC00 | SIUMCR_MLRC01 | SIUMCR_FRC)
233 #endif /* CONFIG_CAN_DRIVER */
235 /*-----------------------------------------------------------------------
236 * TBSCR - Time Base Status and Control 11-26
237 *-----------------------------------------------------------------------
238 * Clear Reference Interrupt Status, Timebase freezing enabled
240 #define CONFIG_SYS_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
242 /*-----------------------------------------------------------------------
243 * RTCSC - Real-Time Clock Status and Control Register 11-27
244 *-----------------------------------------------------------------------
246 #define CONFIG_SYS_RTCSC (RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
248 /*-----------------------------------------------------------------------
249 * PISCR - Periodic Interrupt Status and Control 11-31
250 *-----------------------------------------------------------------------
251 * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
253 #define CONFIG_SYS_PISCR (PISCR_PS | PISCR_PITF)
255 /*-----------------------------------------------------------------------
256 * PLPRCR - PLL, Low-Power, and Reset Control Register 15-30
257 *-----------------------------------------------------------------------
258 * Reset PLL lock status sticky bit, timer expired status bit and timer
259 * interrupt status bit
262 *-----------------------------------------------------------------------
263 * SCCR - System Clock and reset Control Register 15-27
264 *-----------------------------------------------------------------------
265 * Set clock output, timebase and RTC source and divider,
266 * power management and some other internal clocks
269 #define SCCR_MASK SCCR_EBDF11
271 #if CONFIG_8xx_GCLK_FREQ == 50000000
273 #define CONFIG_SYS_PLPRCR ( ((5 - 1) << PLPRCR_MF_SHIFT) | PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
274 #define CONFIG_SYS_SCCR (SCCR_TBS | \
275 SCCR_COM00 | SCCR_DFSYNC00 | SCCR_DFBRG00 | \
276 SCCR_DFNL000 | SCCR_DFNH000 | SCCR_DFLCD000 | \
279 #elif CONFIG_8xx_GCLK_FREQ == 80000000
281 #define CONFIG_SYS_PLPRCR ( ((8 - 1) << PLPRCR_MF_SHIFT) | PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
282 #define CONFIG_SYS_SCCR (SCCR_TBS | \
283 SCCR_COM00 | SCCR_DFSYNC00 | SCCR_DFBRG00 | \
284 SCCR_DFNL000 | SCCR_DFNH000 | SCCR_DFLCD000 | \
285 SCCR_DFALCD00 | SCCR_EBDF01)
289 /*-----------------------------------------------------------------------
291 *-----------------------------------------------------------------------
294 /*#define CONFIG_SYS_DER 0x2002000F*/
295 #define CONFIG_SYS_DER 0
298 * Init Memory Controller:
300 * BR0/1 and OR0/1 (FLASH)
303 #define FLASH_BASE0_PRELIM 0x40000000 /* FLASH bank #0 */
305 /* used to re-map FLASH both when starting from SRAM or FLASH:
306 * restrict access enough to keep SRAM working (if any)
307 * but not too much to meddle with FLASH accesses
309 #define CONFIG_SYS_REMAP_OR_AM 0x80000000 /* OR addr mask */
310 #define CONFIG_SYS_PRELIM_OR_AM 0xE0000000 /* OR addr mask */
312 /* FLASH timing: ACS = 11, TRLX = 0, CSNT = 1, SCY = 5, EHTR = 1 */
313 #define CONFIG_SYS_OR_TIMING_FLASH (OR_CSNT_SAM | OR_BI | OR_SCY_5_CLK | OR_TRLX)
315 #define CONFIG_SYS_OR0_REMAP (CONFIG_SYS_REMAP_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
316 #define CONFIG_SYS_OR0_PRELIM (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
317 #define CONFIG_SYS_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_PS_8 | BR_V )
320 * BR3 and OR3 (SDRAM)
323 #define SDRAM_BASE3_PRELIM 0x00000000 /* SDRAM bank #0 */
324 #define SDRAM_MAX_SIZE 0x04000000 /* max 64 MB per bank */
326 /* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care) */
327 #define CONFIG_SYS_OR_TIMING_SDRAM (OR_CSNT_SAM | OR_G5LS)
329 #define CONFIG_SYS_OR3_PRELIM ((0xFFFFFFFFLU & ~(SDRAM_MAX_SIZE - 1)) | CONFIG_SYS_OR_TIMING_SDRAM)
330 #define CONFIG_SYS_BR3_PRELIM ((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_PS_32 | BR_V)
333 * Memory Periodic Timer Prescaler
336 /* periodic timer for refresh */
337 #define CONFIG_SYS_MAMR_PTA 208
339 /* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit */
340 #define CONFIG_SYS_MPTPR_1BK_8K MPTPR_PTP_DIV16 /* setting for 1 bank */
343 * MAMR settings for SDRAM
347 #define CONFIG_SYS_MAMR_9COL ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \
348 MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 | \
349 MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X)
351 /* Ethernet at SCC2 */
352 #define CONFIG_SCC2_ENET
354 /****************************************************************/
356 #define DSP_SIZE 0x00010000 /* 64K */
357 #define FPGA_SIZE 0x00010000 /* 64K */
359 #define DSP0_BASE 0xF1000000
360 #define DSP1_BASE (DSP0_BASE + DSP_SIZE)
361 #define FPGA_BASE (DSP1_BASE + DSP_SIZE)
363 #if defined(CONFIG_NETVIA_VERSION) && CONFIG_NETVIA_VERSION >= 2
365 #define ER_SIZE 0x00010000 /* 64K */
366 #define ER_BASE (FPGA_BASE + FPGA_SIZE)
368 #define NAND_SIZE 0x00010000 /* 64K */
369 #define NAND_BASE (ER_BASE + ER_SIZE)
373 /****************************************************************/
375 #if defined(CONFIG_NETVIA_VERSION) && CONFIG_NETVIA_VERSION >= 2
377 #define STATUS_LED_BIT 0x00000001 /* bit 31 */
378 #define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2)
379 #define STATUS_LED_STATE STATUS_LED_BLINKING
381 #define STATUS_LED_BIT1 0x00000002 /* bit 30 */
382 #define STATUS_LED_PERIOD1 (CONFIG_SYS_HZ / 2)
383 #define STATUS_LED_STATE1 STATUS_LED_OFF
385 #define STATUS_LED_ACTIVE 0 /* LED on for bit == 0 */
386 #define STATUS_LED_BOOT 0 /* LED 0 used for boot status */
391 /*****************************************************************************/
395 #if defined(CONFIG_NETVIA_VERSION) && CONFIG_NETVIA_VERSION >= 2
399 /* last value written to the external register; we cannot read back */
400 extern unsigned int last_er_val;
402 /* led_id_t is unsigned long mask */
403 typedef unsigned int led_id_t;
405 static inline void __led_init(led_id_t mask, int state)
407 unsigned int new_er_val;
410 new_er_val = last_er_val & ~mask;
412 new_er_val = last_er_val | mask;
414 *(volatile unsigned int *)ER_BASE = new_er_val;
415 last_er_val = new_er_val;
418 static inline void __led_toggle(led_id_t mask)
420 unsigned int new_er_val;
422 new_er_val = last_er_val ^ mask;
423 *(volatile unsigned int *)ER_BASE = new_er_val;
424 last_er_val = new_er_val;
427 static inline void __led_set(led_id_t mask, int state)
429 unsigned int new_er_val;
432 new_er_val = last_er_val & ~mask;
434 new_er_val = last_er_val | mask;
436 *(volatile unsigned int *)ER_BASE = new_er_val;
437 last_er_val = new_er_val;
440 /* MAX3100 console */
441 #define MAX3100_SPI_RXD_PORT (((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbdat)
442 #define MAX3100_SPI_RXD_BIT 0x00000008
444 #define MAX3100_SPI_TXD_PORT (((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbdat)
445 #define MAX3100_SPI_TXD_BIT 0x00000004
447 #define MAX3100_SPI_CLK_PORT (((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbdat)
448 #define MAX3100_SPI_CLK_BIT 0x00000002
450 #define MAX3100_CS_PORT (((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pddat)
451 #define MAX3100_CS_BIT 0x0010
457 /*************************************************************************************************/
459 #endif /* __CONFIG_H */