2 * Copyright (C) 2009-2010 Freescale Semiconductor, Inc.
4 * See file CREDITS for list of people who contributed to this
7 * This program is free software; you can redistribute it and/or
8 * modify it under the terms of the GNU General Public License as
9 * published by the Free Software Foundation; either version 2 of
10 * the License, or (at your option) any later version.
12 * This program is distributed in the hope that it will be useful,
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 * GNU General Public License for more details.
17 * You should have received a copy of the GNU General Public License
18 * along with this program; if not, write to the Free Software
19 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
24 * mpc8569mds board configuration file
29 /* High Level Configuration Options */
30 #define CONFIG_BOOKE 1 /* BOOKE */
31 #define CONFIG_E500 1 /* BOOKE e500 family */
32 #define CONFIG_MPC85xx 1 /* MPC8540/60/55/41/48/68 */
33 #define CONFIG_MPC8569 1 /* MPC8569 specific */
34 #define CONFIG_MPC8569MDS 1 /* MPC8569MDS board specific */
36 #define CONFIG_FSL_ELBC 1 /* Has Enhance localbus controller */
38 #define CONFIG_PCI 1 /* Disable PCI/PCIE */
39 #define CONFIG_PCIE1 1 /* PCIE controller */
40 #define CONFIG_FSL_PCI_INIT 1 /* use common fsl pci init code */
41 #define CONFIG_FSL_PCIE_RESET 1 /* need PCIe reset errata */
42 #define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */
43 #define CONFIG_QE /* Enable QE */
44 #define CONFIG_ENV_OVERWRITE
45 #define CONFIG_FSL_LAW 1 /* Use common FSL init code */
48 extern unsigned long get_clock_freq(void);
50 /* Replace a call to get_clock_freq (after it is implemented)*/
51 #define CONFIG_SYS_CLK_FREQ 66666666
52 #define CONFIG_DDR_CLK_FREQ CONFIG_SYS_CLK_FREQ
55 #define CONFIG_PQ_MDS_PIB
56 #define CONFIG_PQ_MDS_PIB_ATM
60 * These can be toggled for performance analysis, otherwise use default.
62 #define CONFIG_L2_CACHE /* toggle L2 cache */
63 #define CONFIG_BTB /* toggle branch predition */
66 #define CONFIG_NAND_U_BOOT 1
67 #define CONFIG_RAMBOOT_NAND 1
68 #ifdef CONFIG_NAND_SPL
69 #define CONFIG_SYS_TEXT_BASE_SPL 0xfff00000
70 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE_SPL /* start of monitor */
72 #define CONFIG_SYS_TEXT_BASE 0xf8f82000
76 #ifndef CONFIG_SYS_TEXT_BASE
77 #define CONFIG_SYS_TEXT_BASE 0xfff80000
80 #ifndef CONFIG_SYS_MONITOR_BASE
81 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
85 * Only possible on E500 Version 2 or newer cores.
87 #define CONFIG_ENABLE_36BIT_PHYS 1
89 #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */
90 #define CONFIG_BOARD_EARLY_INIT_R 1
91 #define CONFIG_HWCONFIG
93 #define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */
94 #define CONFIG_SYS_MEMTEST_END 0x00400000
97 * Config the L2 Cache as L2 SRAM
99 #define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000
100 #define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR
101 #define CONFIG_SYS_L2_SIZE (512 << 10)
102 #define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
105 * Base addresses -- Note these are effective addresses where the
106 * actual resources get mapped (not physical addresses)
108 #define CONFIG_SYS_CCSRBAR 0xe0000000 /* relocated CCSRBAR */
109 #define CONFIG_SYS_CCSRBAR_PHYS CONFIG_SYS_CCSRBAR
110 /* physical addr of CCSRBAR */
111 #define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR
112 /* PQII uses CONFIG_SYS_IMMR */
114 #if defined(CONFIG_RAMBOOT_NAND) && !defined(CONFIG_NAND_SPL)
115 #define CONFIG_SYS_CCSRBAR_DEFAULT CONFIG_SYS_CCSRBAR
117 #define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */
121 #define CONFIG_FSL_DDR3
122 #undef CONFIG_FSL_DDR_INTERACTIVE
123 #define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup*/
124 #define CONFIG_DDR_SPD
125 #define CONFIG_DDR_DLL /* possible DLL fix needed */
126 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER /* DDR controller or DMA? */
128 #define CONFIG_MEM_INIT_VALUE 0xDeadBeef
130 #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000
131 /* DDR is system memory*/
132 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE
134 #define CONFIG_NUM_DDR_CONTROLLERS 1
135 #define CONFIG_DIMM_SLOTS_PER_CTLR 1
136 #define CONFIG_CHIP_SELECTS_PER_CTRL (2 * CONFIG_DIMM_SLOTS_PER_CTLR)
138 /* I2C addresses of SPD EEPROMs */
139 #define SPD_EEPROM_ADDRESS1 0x51 /* CTLR 0 DIMM 0 */
140 #define SPD_EEPROM_ADDRESS2 0x52 /* CTLR 1 DIMM 0 */
142 /* These are used when DDR doesn't use SPD. */
143 #define CONFIG_SYS_SDRAM_SIZE 1024 /* DDR is 1024MB */
144 #define CONFIG_SYS_DDR_CS0_BNDS 0x0000003F
145 #define CONFIG_SYS_DDR_CS0_CONFIG 0x80014202
146 #define CONFIG_SYS_DDR_TIMING_3 0x00020000
147 #define CONFIG_SYS_DDR_TIMING_0 0x00330004
148 #define CONFIG_SYS_DDR_TIMING_1 0x6F6B4644
149 #define CONFIG_SYS_DDR_TIMING_2 0x002888D0
150 #define CONFIG_SYS_DDR_SDRAM_CFG 0x47000000
151 #define CONFIG_SYS_DDR_SDRAM_CFG_2 0x04401040
152 #define CONFIG_SYS_DDR_SDRAM_MODE 0x40401521
153 #define CONFIG_SYS_DDR_SDRAM_MODE_2 0x8000C000
154 #define CONFIG_SYS_DDR_SDRAM_INTERVAL 0x03E00000
155 #define CONFIG_SYS_DDR_DATA_INIT 0xdeadbeef
156 #define CONFIG_SYS_DDR_SDRAM_CLK_CNTL 0x01000000
157 #define CONFIG_SYS_DDR_TIMING_4 0x00220001
158 #define CONFIG_SYS_DDR_TIMING_5 0x03402400
159 #define CONFIG_SYS_DDR_ZQ_CNTL 0x89080600
160 #define CONFIG_SYS_DDR_WRLVL_CNTL 0x0655A604
161 #define CONFIG_SYS_DDR_CDR_1 0x80040000
162 #define CONFIG_SYS_DDR_CDR_2 0x00000000
163 #define CONFIG_SYS_DDR_OCD_CTRL 0x00000000
164 #define CONFIG_SYS_DDR_OCD_STATUS 0x00000000
165 #define CONFIG_SYS_DDR_CONTROL 0xc7000000 /* Type = DDR3 */
166 #define CONFIG_SYS_DDR_CONTROL2 0x24400000
168 #define CONFIG_SYS_DDR_ERR_INT_EN 0x0000000d
169 #define CONFIG_SYS_DDR_ERR_DIS 0x00000000
170 #define CONFIG_SYS_DDR_SBE 0x00010000
172 #undef CONFIG_CLOCKS_IN_MHZ
175 * Local Bus Definitions
178 #define CONFIG_SYS_FLASH_BASE 0xfe000000 /* start of FLASH 32M */
179 #define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE
181 #define CONFIG_SYS_BCSR_BASE 0xf8000000
182 #define CONFIG_SYS_BCSR_BASE_PHYS CONFIG_SYS_BCSR_BASE
184 /*Chip select 0 - Flash*/
185 #define CONFIG_FLASH_BR_PRELIM 0xfe000801
186 #define CONFIG_FLASH_OR_PRELIM 0xfe000ff7
188 /*Chip select 1 - BCSR*/
189 #define CONFIG_SYS_BR1_PRELIM 0xf8000801
190 #define CONFIG_SYS_OR1_PRELIM 0xffffe9f7
192 /*Chip select 4 - PIB*/
193 #define CONFIG_SYS_BR4_PRELIM 0xf8008801
194 #define CONFIG_SYS_OR4_PRELIM 0xffffe9f7
196 /*Chip select 5 - PIB*/
197 #define CONFIG_SYS_BR5_PRELIM 0xf8010801
198 #define CONFIG_SYS_OR5_PRELIM 0xffffe9f7
200 #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */
201 #define CONFIG_SYS_MAX_FLASH_SECT 512 /* sectors per device */
202 #undef CONFIG_SYS_FLASH_CHECKSUM
203 #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
204 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
206 #if defined(CONFIG_RAMBOOT_NAND)
207 #define CONFIG_SYS_RAMBOOT
208 #define CONFIG_SYS_EXTRA_ENV_RELOC
210 #undef CONFIG_SYS_RAMBOOT
213 #define CONFIG_FLASH_CFI_DRIVER
214 #define CONFIG_SYS_FLASH_CFI
215 #define CONFIG_SYS_FLASH_EMPTY_INFO
217 /* Chip select 3 - NAND */
218 #ifndef CONFIG_NAND_SPL
219 #define CONFIG_SYS_NAND_BASE 0xFC000000
221 #define CONFIG_SYS_NAND_BASE 0xFFF00000
224 /* NAND boot: 4K NAND loader config */
225 #define CONFIG_SYS_NAND_SPL_SIZE 0x1000
226 #define CONFIG_SYS_NAND_U_BOOT_SIZE ((512 << 10) - 0x2000)
227 #define CONFIG_SYS_NAND_U_BOOT_DST (CONFIG_SYS_INIT_L2_ADDR)
228 #define CONFIG_SYS_NAND_U_BOOT_START \
229 (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_NAND_SPL_SIZE)
230 #define CONFIG_SYS_NAND_U_BOOT_OFFS (0)
231 #define CONFIG_SYS_NAND_U_BOOT_RELOC (CONFIG_SYS_INIT_L2_END - 0x2000)
232 #define CONFIG_SYS_NAND_U_BOOT_RELOC_SP ((CONFIG_SYS_INIT_L2_END - 1) & ~0xF)
234 #define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE
235 #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE, }
236 #define CONFIG_SYS_MAX_NAND_DEVICE 1
237 #define CONFIG_MTD_NAND_VERIFY_WRITE 1
238 #define CONFIG_CMD_NAND 1
239 #define CONFIG_NAND_FSL_ELBC 1
240 #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024)
241 #define CONFIG_NAND_BR_PRELIM (CONFIG_SYS_NAND_BASE_PHYS \
242 | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \
243 | BR_PS_8 /* Port Size = 8 bit */ \
244 | BR_MS_FCM /* MSEL = FCM */ \
246 #define CONFIG_NAND_OR_PRELIM (0xFFFC0000 /* length 256K */ \
254 #ifdef CONFIG_RAMBOOT_NAND
255 #define CONFIG_SYS_BR0_PRELIM CONFIG_NAND_BR_PRELIM /* NAND Base Address */
256 #define CONFIG_SYS_OR0_PRELIM CONFIG_NAND_OR_PRELIM /* NAND Options */
257 #define CONFIG_SYS_BR3_PRELIM CONFIG_FLASH_BR_PRELIM /* NOR Base Address */
258 #define CONFIG_SYS_OR3_PRELIM CONFIG_FLASH_OR_PRELIM /* NOR Options */
260 #define CONFIG_SYS_BR0_PRELIM CONFIG_FLASH_BR_PRELIM /* NOR Base Address */
261 #define CONFIG_SYS_OR0_PRELIM CONFIG_FLASH_OR_PRELIM /* NOR Options */
262 #define CONFIG_SYS_BR3_PRELIM CONFIG_NAND_BR_PRELIM /* NAND Base Address */
263 #define CONFIG_SYS_OR3_PRELIM CONFIG_NAND_OR_PRELIM /* NAND Options */
266 #define CONFIG_SYS_LBC_LCRR 0x00000004 /* LB clock ratio reg */
267 #define CONFIG_SYS_LBC_LBCR 0x00040000 /* LB config reg */
268 #define CONFIG_SYS_LBC_LSRT 0x20000000 /* LB sdram refresh timer */
269 #define CONFIG_SYS_LBC_MRTPR 0x00000000 /* LB refresh timer prescal*/
271 #define CONFIG_SYS_INIT_RAM_LOCK 1
272 #define CONFIG_SYS_INIT_RAM_ADDR 0xe4010000 /* Initial RAM address */
273 #define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size of used area in RAM */
275 #define CONFIG_SYS_GBL_DATA_OFFSET \
276 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
277 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
279 #define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
280 #define CONFIG_SYS_MALLOC_LEN (512 * 1024) /* Reserved for malloc */
283 #define CONFIG_CONS_INDEX 1
284 #define CONFIG_SERIAL_MULTI 1
285 #define CONFIG_SYS_NS16550
286 #define CONFIG_SYS_NS16550_SERIAL
287 #define CONFIG_SYS_NS16550_REG_SIZE 1
288 #define CONFIG_SYS_NS16550_CLK get_bus_freq(0)
289 #ifdef CONFIG_NAND_SPL
290 #define CONFIG_NS16550_MIN_FUNCTIONS
293 #define CONFIG_SYS_BAUDRATE_TABLE \
294 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
296 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500)
297 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600)
299 /* Use the HUSH parser*/
300 #define CONFIG_SYS_HUSH_PARSER
301 #ifdef CONFIG_SYS_HUSH_PARSER
302 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
305 /* pass open firmware flat tree */
306 #define CONFIG_OF_LIBFDT 1
307 #define CONFIG_OF_BOARD_SETUP 1
308 #define CONFIG_OF_STDOUT_VIA_ALIAS 1
313 #define CONFIG_FSL_I2C /* Use FSL common I2C driver */
314 #define CONFIG_HARD_I2C /* I2C with hardware support*/
315 #undef CONFIG_SOFT_I2C /* I2C bit-banged */
316 #define CONFIG_I2C_MULTI_BUS
317 #define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
318 #define CONFIG_SYS_I2C_SLAVE 0x7F
319 #define CONFIG_SYS_I2C_NOPROBES {{0,0x69}} /* Don't probe these addrs */
320 #define CONFIG_SYS_I2C_OFFSET 0x3000
321 #define CONFIG_SYS_I2C2_OFFSET 0x3100
326 #define CONFIG_ID_EEPROM
327 #ifdef CONFIG_ID_EEPROM
328 #define CONFIG_SYS_I2C_EEPROM_NXID
330 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x52
331 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
332 #define CONFIG_SYS_EEPROM_BUS_NUM 1
334 #define PLPPAR1_I2C_BIT_MASK 0x0000000F
335 #define PLPPAR1_I2C2_VAL 0x00000000
336 #define PLPPAR1_ESDHC_VAL 0x0000000A
337 #define PLPDIR1_I2C_BIT_MASK 0x0000000F
338 #define PLPDIR1_I2C2_VAL 0x0000000F
339 #define PLPDIR1_ESDHC_VAL 0x00000006
340 #define PLPPAR1_UART0_BIT_MASK 0x00000fc0
341 #define PLPPAR1_ESDHC_4BITS_VAL 0x00000a80
342 #define PLPDIR1_UART0_BIT_MASK 0x00000fc0
343 #define PLPDIR1_ESDHC_4BITS_VAL 0x00000a80
347 * Memory Addresses are mapped 1-1. I/O is mapped from 0
349 #define CONFIG_SYS_PCIE1_MEM_VIRT 0xa0000000
350 #define CONFIG_SYS_PCIE1_MEM_BUS 0xa0000000
351 #define CONFIG_SYS_PCIE1_MEM_PHYS 0xa0000000
352 #define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */
353 #define CONFIG_SYS_PCIE1_IO_VIRT 0xe2800000
354 #define CONFIG_SYS_PCIE1_IO_BUS 0x00000000
355 #define CONFIG_SYS_PCIE1_IO_PHYS 0xe2800000
356 #define CONFIG_SYS_PCIE1_IO_SIZE 0x00800000 /* 8M */
358 #define CONFIG_SYS_SRIO_MEM_VIRT 0xc0000000
359 #define CONFIG_SYS_SRIO_MEM_BUS 0xc0000000
360 #define CONFIG_SYS_SRIO_MEM_PHYS 0xc0000000
364 * QE UEC ethernet configuration
366 #define CONFIG_SYS_UCC_RGMII_MODE /* Set UCC work at RGMII by default */
367 #undef CONFIG_SYS_UCC_RMII_MODE /* Set UCC work at RMII mode */
369 #define CONFIG_MIIM_ADDRESS (CONFIG_SYS_CCSRBAR + 0x82120)
370 #define CONFIG_UEC_ETH
371 #define CONFIG_ETHPRIME "UEC0"
372 #define CONFIG_PHY_MODE_NEED_CHANGE
374 #define CONFIG_UEC_ETH1 /* GETH1 */
375 #define CONFIG_HAS_ETH0
377 #ifdef CONFIG_UEC_ETH1
378 #define CONFIG_SYS_UEC1_UCC_NUM 0 /* UCC1 */
379 #define CONFIG_SYS_UEC1_RX_CLK QE_CLK_NONE
380 #if defined(CONFIG_SYS_UCC_RGMII_MODE)
381 #define CONFIG_SYS_UEC1_TX_CLK QE_CLK12
382 #define CONFIG_SYS_UEC1_ETH_TYPE GIGA_ETH
383 #define CONFIG_SYS_UEC1_PHY_ADDR 7
384 #define CONFIG_SYS_UEC1_INTERFACE_TYPE RGMII_ID
385 #define CONFIG_SYS_UEC1_INTERFACE_SPEED 1000
386 #elif defined(CONFIG_SYS_UCC_RMII_MODE)
387 #define CONFIG_SYS_UEC1_TX_CLK QE_CLK16 /* CLK16 for RMII */
388 #define CONFIG_SYS_UEC1_ETH_TYPE FAST_ETH
389 #define CONFIG_SYS_UEC1_PHY_ADDR 8 /* 0x8 for RMII */
390 #define CONFIG_SYS_UEC1_INTERFACE_TYPE RMII
391 #define CONFIG_SYS_UEC1_INTERFACE_SPEED 100
392 #endif /* CONFIG_SYS_UCC_RGMII_MODE */
393 #endif /* CONFIG_UEC_ETH1 */
395 #define CONFIG_UEC_ETH2 /* GETH2 */
396 #define CONFIG_HAS_ETH1
398 #ifdef CONFIG_UEC_ETH2
399 #define CONFIG_SYS_UEC2_UCC_NUM 1 /* UCC2 */
400 #define CONFIG_SYS_UEC2_RX_CLK QE_CLK_NONE
401 #if defined(CONFIG_SYS_UCC_RGMII_MODE)
402 #define CONFIG_SYS_UEC2_TX_CLK QE_CLK17
403 #define CONFIG_SYS_UEC2_ETH_TYPE GIGA_ETH
404 #define CONFIG_SYS_UEC2_PHY_ADDR 1
405 #define CONFIG_SYS_UEC2_INTERFACE_TYPE RGMII_ID
406 #define CONFIG_SYS_UEC2_INTERFACE_SPEED 1000
407 #elif defined(CONFIG_SYS_UCC_RMII_MODE)
408 #define CONFIG_SYS_UEC2_TX_CLK QE_CLK16 /* CLK 16 for RMII */
409 #define CONFIG_SYS_UEC2_ETH_TYPE FAST_ETH
410 #define CONFIG_SYS_UEC2_PHY_ADDR 0x9 /* 0x9 for RMII */
411 #define CONFIG_SYS_UEC2_INTERFACE_TYPE RMII
412 #define CONFIG_SYS_UEC2_INTERFACE_SPEED 100
413 #endif /* CONFIG_SYS_UCC_RGMII_MODE */
414 #endif /* CONFIG_UEC_ETH2 */
416 #define CONFIG_UEC_ETH3 /* GETH3 */
417 #define CONFIG_HAS_ETH2
419 #ifdef CONFIG_UEC_ETH3
420 #define CONFIG_SYS_UEC3_UCC_NUM 2 /* UCC3 */
421 #define CONFIG_SYS_UEC3_RX_CLK QE_CLK_NONE
422 #if defined(CONFIG_SYS_UCC_RGMII_MODE)
423 #define CONFIG_SYS_UEC3_TX_CLK QE_CLK12
424 #define CONFIG_SYS_UEC3_ETH_TYPE GIGA_ETH
425 #define CONFIG_SYS_UEC3_PHY_ADDR 2
426 #define CONFIG_SYS_UEC3_INTERFACE_TYPE RGMII_ID
427 #define CONFIG_SYS_UEC3_INTERFACE_SPEED 1000
428 #elif defined(CONFIG_SYS_UCC_RMII_MODE)
429 #define CONFIG_SYS_UEC3_TX_CLK QE_CLK16 /* CLK_16 for RMII */
430 #define CONFIG_SYS_UEC3_ETH_TYPE FAST_ETH
431 #define CONFIG_SYS_UEC3_PHY_ADDR 0xA /* 0xA for RMII */
432 #define CONFIG_SYS_UEC3_INTERFACE_TYPE RMII
433 #define CONFIG_SYS_UEC3_INTERFACE_SPEED 100
434 #endif /* CONFIG_SYS_UCC_RGMII_MODE */
435 #endif /* CONFIG_UEC_ETH3 */
437 #define CONFIG_UEC_ETH4 /* GETH4 */
438 #define CONFIG_HAS_ETH3
440 #ifdef CONFIG_UEC_ETH4
441 #define CONFIG_SYS_UEC4_UCC_NUM 3 /* UCC4 */
442 #define CONFIG_SYS_UEC4_RX_CLK QE_CLK_NONE
443 #if defined(CONFIG_SYS_UCC_RGMII_MODE)
444 #define CONFIG_SYS_UEC4_TX_CLK QE_CLK17
445 #define CONFIG_SYS_UEC4_ETH_TYPE GIGA_ETH
446 #define CONFIG_SYS_UEC4_PHY_ADDR 3
447 #define CONFIG_SYS_UEC4_INTERFACE_TYPE RGMII_ID
448 #define CONFIG_SYS_UEC4_INTERFACE_SPEED 1000
449 #elif defined(CONFIG_SYS_UCC_RMII_MODE)
450 #define CONFIG_SYS_UEC4_TX_CLK QE_CLK16 /* CLK16 for RMII */
451 #define CONFIG_SYS_UEC4_ETH_TYPE FAST_ETH
452 #define CONFIG_SYS_UEC4_PHY_ADDR 0xB /* 0xB for RMII */
453 #define CONFIG_SYS_UEC4_INTERFACE_TYPE RMII
454 #define CONFIG_SYS_UEC4_INTERFACE_SPEED 100
455 #endif /* CONFIG_SYS_UCC_RGMII_MODE */
456 #endif /* CONFIG_UEC_ETH4 */
458 #undef CONFIG_UEC_ETH6 /* GETH6 */
459 #define CONFIG_HAS_ETH5
461 #ifdef CONFIG_UEC_ETH6
462 #define CONFIG_SYS_UEC6_UCC_NUM 5 /* UCC6 */
463 #define CONFIG_SYS_UEC6_RX_CLK QE_CLK_NONE
464 #define CONFIG_SYS_UEC6_TX_CLK QE_CLK_NONE
465 #define CONFIG_SYS_UEC6_ETH_TYPE GIGA_ETH
466 #define CONFIG_SYS_UEC6_PHY_ADDR 4
467 #define CONFIG_SYS_UEC6_INTERFACE_TYPE SGMII
468 #define CONFIG_SYS_UEC6_INTERFACE_SPEED 1000
469 #endif /* CONFIG_UEC_ETH6 */
471 #undef CONFIG_UEC_ETH8 /* GETH8 */
472 #define CONFIG_HAS_ETH7
474 #ifdef CONFIG_UEC_ETH8
475 #define CONFIG_SYS_UEC8_UCC_NUM 7 /* UCC8 */
476 #define CONFIG_SYS_UEC8_RX_CLK QE_CLK_NONE
477 #define CONFIG_SYS_UEC8_TX_CLK QE_CLK_NONE
478 #define CONFIG_SYS_UEC8_ETH_TYPE GIGA_ETH
479 #define CONFIG_SYS_UEC8_PHY_ADDR 6
480 #define CONFIG_SYS_UEC8_INTERFACE_TYPE SGMII
481 #define CONFIG_SYS_UEC8_INTERFACE_SPEED 1000
482 #endif /* CONFIG_UEC_ETH8 */
484 #endif /* CONFIG_QE */
486 #if defined(CONFIG_PCI)
488 #define CONFIG_NET_MULTI
489 #define CONFIG_PCI_PNP /* do pci plug-and-play */
491 #undef CONFIG_EEPRO100
493 #define CONFIG_E1000 /* Define e1000 pci Ethernet card */
495 #undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
497 #endif /* CONFIG_PCI */
499 #ifndef CONFIG_NET_MULTI
500 #define CONFIG_NET_MULTI 1
506 #if defined(CONFIG_SYS_RAMBOOT)
507 #if defined(CONFIG_RAMBOOT_NAND)
508 #define CONFIG_ENV_IS_IN_NAND 1
509 #define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE
510 #define CONFIG_ENV_OFFSET ((512 * 1024) + CONFIG_SYS_NAND_BLOCK_SIZE)
513 #define CONFIG_ENV_IS_IN_FLASH 1
514 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
515 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K(one sector) for env */
516 #define CONFIG_ENV_SIZE 0x2000
519 #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
520 #define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
522 /* QE microcode/firmware address */
523 #define CONFIG_SYS_QE_FW_ADDR 0xfff00000
528 #define CONFIG_BOOTP_BOOTFILESIZE
529 #define CONFIG_BOOTP_BOOTPATH
530 #define CONFIG_BOOTP_GATEWAY
531 #define CONFIG_BOOTP_HOSTNAME
535 * Command line configuration.
537 #include <config_cmd_default.h>
539 #define CONFIG_CMD_PING
540 #define CONFIG_CMD_I2C
541 #define CONFIG_CMD_MII
542 #define CONFIG_CMD_ELF
543 #define CONFIG_CMD_IRQ
544 #define CONFIG_CMD_SETEXPR
545 #define CONFIG_CMD_REGINFO
547 #if defined(CONFIG_PCI)
548 #define CONFIG_CMD_PCI
552 #undef CONFIG_WATCHDOG /* watchdog disabled */
557 #define CONFIG_FSL_ESDHC
558 #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR
559 #define CONFIG_CMD_MMC
560 #define CONFIG_GENERIC_MMC
561 #define CONFIG_CMD_EXT2
562 #define CONFIG_CMD_FAT
563 #define CONFIG_DOS_PARTITION
567 * Miscellaneous configurable options
569 #define CONFIG_SYS_LONGHELP /* undef to save memory */
570 #define CONFIG_CMDLINE_EDITING /* Command-line editing */
571 #define CONFIG_AUTO_COMPLETE /* add autocompletion support */
572 #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */
573 #define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
574 #if defined(CONFIG_CMD_KGDB)
575 #define CONFIG_SYS_CBSIZE 2048 /* Console I/O Buffer Size */
577 #define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */
579 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
580 /* Print Buffer Size */
581 #define CONFIG_SYS_MAXARGS 32 /* max number of command args */
582 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
583 /* Boot Argument Buffer Size */
584 #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */
587 * For booting Linux, the board info and command line data
588 * have to be in the first 16 MB of memory, since this is
589 * the maximum mapped by the Linux kernel during initialization.
591 #define CONFIG_SYS_BOOTMAPSZ (16 << 20)
592 /* Initial Memory map for Linux*/
594 #if defined(CONFIG_CMD_KGDB)
595 #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
596 #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
600 * Environment Configuration
602 #define CONFIG_HOSTNAME mpc8569mds
603 #define CONFIG_ROOTPATH /nfsroot
604 #define CONFIG_BOOTFILE your.uImage
606 #define CONFIG_SERVERIP 192.168.1.1
607 #define CONFIG_GATEWAYIP 192.168.1.1
608 #define CONFIG_NETMASK 255.255.255.0
610 #define CONFIG_LOADADDR 200000 /*default location for tftp and bootm*/
612 #define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */
613 #undef CONFIG_BOOTARGS /* the boot command will set bootargs*/
615 #define CONFIG_BAUDRATE 115200
617 #define CONFIG_EXTRA_ENV_SETTINGS \
619 "consoledev=ttyS0\0" \
620 "ramdiskaddr=600000\0" \
621 "ramdiskfile=your.ramdisk.u-boot\0" \
623 "fdtfile=your.fdt.dtb\0" \
624 "nfsargs=setenv bootargs root=/dev/nfs rw " \
625 "nfsroot=$serverip:$rootpath " \
626 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
627 "console=$consoledev,$baudrate $othbootargs\0" \
628 "ramargs=setenv bootargs root=/dev/ram rw " \
629 "console=$consoledev,$baudrate $othbootargs\0" \
631 #define CONFIG_NFSBOOTCOMMAND \
633 "tftp $loadaddr $bootfile;" \
634 "tftp $fdtaddr $fdtfile;" \
635 "bootm $loadaddr - $fdtaddr"
637 #define CONFIG_RAMBOOTCOMMAND \
639 "tftp $ramdiskaddr $ramdiskfile;" \
640 "tftp $loadaddr $bootfile;" \
641 "bootm $loadaddr $ramdiskaddr"
643 #define CONFIG_BOOTCOMMAND CONFIG_NFSBOOTCOMMAND
645 #endif /* __CONFIG_H */