2 * Copyright 2007-2009,2010 Freescale Semiconductor, Inc.
4 * See file CREDITS for list of people who contributed to this
7 * This program is free software; you can redistribute it and/or
8 * modify it under the terms of the GNU General Public License as
9 * published by the Free Software Foundation; either version 2 of
10 * the License, or (at your option) any later version.
12 * This program is distributed in the hope that it will be useful,
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 * GNU General Public License for more details.
17 * You should have received a copy of the GNU General Public License
18 * along with this program; if not, write to the Free Software
19 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
24 * mpc8536ds board configuration file
30 #include "../board/freescale/common/ics307_clk.h"
32 #ifdef CONFIG_MK_36BIT
33 #define CONFIG_PHYS_64BIT 1
37 #define CONFIG_NAND_U_BOOT 1
38 #define CONFIG_RAMBOOT_NAND 1
39 #define CONFIG_RAMBOOT_TEXT_BASE 0xf8f82000
42 #ifdef CONFIG_MK_SDCARD
43 #define CONFIG_RAMBOOT_SDCARD 1
44 #define CONFIG_RAMBOOT_TEXT_BASE 0xf8f80000
47 #ifdef CONFIG_MK_SPIFLASH
48 #define CONFIG_RAMBOOT_SPIFLASH 1
49 #define CONFIG_RAMBOOT_TEXT_BASE 0xf8f80000
52 /* High Level Configuration Options */
53 #define CONFIG_BOOKE 1 /* BOOKE */
54 #define CONFIG_E500 1 /* BOOKE e500 family */
55 #define CONFIG_MPC85xx 1 /* MPC8540/60/55/41/48 */
56 #define CONFIG_MPC8536 1
57 #define CONFIG_MPC8536DS 1
59 #define CONFIG_FSL_ELBC 1 /* Has Enhanced localbus controller */
60 #define CONFIG_PCI 1 /* Enable PCI/PCIE */
61 #define CONFIG_PCI1 1 /* Enable PCI controller 1 */
62 #define CONFIG_PCIE1 1 /* PCIE controler 1 (slot 1) */
63 #define CONFIG_PCIE2 1 /* PCIE controler 2 (slot 2) */
64 #define CONFIG_PCIE3 1 /* PCIE controler 3 (ULI bridge) */
65 #define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */
66 #define CONFIG_FSL_PCIE_RESET 1 /* need PCIe reset errata */
67 #define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */
69 #define CONFIG_FSL_LAW 1 /* Use common FSL init code */
70 #define CONFIG_E1000 1 /* Defind e1000 pci Ethernet card*/
72 #define CONFIG_TSEC_ENET /* tsec ethernet support */
73 #define CONFIG_ENV_OVERWRITE
75 #define CONFIG_SYS_CLK_FREQ get_board_sys_clk() /* sysclk for MPC85xx */
76 #define CONFIG_DDR_CLK_FREQ get_board_ddr_clk()
77 #define CONFIG_ICS307_REFCLK_HZ 33333000 /* ICS307 clock chip ref freq */
80 * These can be toggled for performance analysis, otherwise use default.
82 #define CONFIG_L2_CACHE /* toggle L2 cache */
83 #define CONFIG_BTB /* toggle branch predition */
85 #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */
87 #define CONFIG_ENABLE_36BIT_PHYS 1
89 #ifdef CONFIG_PHYS_64BIT
90 #define CONFIG_ADDR_MAP 1
91 #define CONFIG_SYS_NUM_ADDR_MAP 16 /* number of TLB1 entries */
94 #define CONFIG_SYS_MEMTEST_START 0x00010000 /* skip exception vectors */
95 #define CONFIG_SYS_MEMTEST_END 0x1f000000 /* skip u-boot at top of RAM */
96 #define CONFIG_PANIC_HANG /* do not reset board on panic */
99 * Config the L2 Cache as L2 SRAM
101 #define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000
102 #ifdef CONFIG_PHYS_64BIT
103 #define CONFIG_SYS_INIT_L2_ADDR_PHYS 0xff8f80000ull
105 #define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR
107 #define CONFIG_SYS_L2_SIZE (512 << 10)
108 #define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
111 * Base addresses -- Note these are effective addresses where the
112 * actual resources get mapped (not physical addresses)
114 #define CONFIG_SYS_CCSRBAR 0xffe00000 /* relocated CCSRBAR */
115 #ifdef CONFIG_PHYS_64BIT
116 #define CONFIG_SYS_CCSRBAR_PHYS 0xfffe00000ull /* physical addr of CCSRBAR */
118 #define CONFIG_SYS_CCSRBAR_PHYS CONFIG_SYS_CCSRBAR
120 #define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR /* PQII uses CONFIG_SYS_IMMR */
122 #if defined(CONFIG_RAMBOOT_NAND) && !defined(CONFIG_NAND_SPL)
123 #define CONFIG_SYS_CCSRBAR_DEFAULT CONFIG_SYS_CCSRBAR
125 #define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */
128 #define CONFIG_SYS_PCI1_ADDR (CONFIG_SYS_CCSRBAR + 0x8000)
129 #define CONFIG_SYS_PCIE1_ADDR (CONFIG_SYS_CCSRBAR + 0xa000)
130 #define CONFIG_SYS_PCIE2_ADDR (CONFIG_SYS_CCSRBAR + 0x9000)
131 #define CONFIG_SYS_PCIE3_ADDR (CONFIG_SYS_CCSRBAR + 0xb000)
134 #define CONFIG_VERY_BIG_RAM
135 #define CONFIG_FSL_DDR2
136 #undef CONFIG_FSL_DDR_INTERACTIVE
137 #define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */
138 #define CONFIG_DDR_SPD
139 #undef CONFIG_DDR_DLL
141 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER /* DDR controller or DMA? */
142 #define CONFIG_MEM_INIT_VALUE 0xDeadBeef
144 #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000
145 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE
147 #define CONFIG_NUM_DDR_CONTROLLERS 1
148 #define CONFIG_DIMM_SLOTS_PER_CTLR 1
149 #define CONFIG_CHIP_SELECTS_PER_CTRL 2
151 /* I2C addresses of SPD EEPROMs */
152 #define SPD_EEPROM_ADDRESS 0x51 /* CTLR 0 DIMM 0 */
153 #define CONFIG_SYS_SPD_BUS_NUM 1
155 /* These are used when DDR doesn't use SPD. */
156 #define CONFIG_SYS_SDRAM_SIZE 256 /* DDR is 256MB */
157 #define CONFIG_SYS_DDR_CS0_BNDS 0x0000001F
158 #define CONFIG_SYS_DDR_CS0_CONFIG 0x80010102 /* Enable, no interleaving */
159 #define CONFIG_SYS_DDR_TIMING_3 0x00000000
160 #define CONFIG_SYS_DDR_TIMING_0 0x00260802
161 #define CONFIG_SYS_DDR_TIMING_1 0x3935d322
162 #define CONFIG_SYS_DDR_TIMING_2 0x14904cc8
163 #define CONFIG_SYS_DDR_MODE_1 0x00480432
164 #define CONFIG_SYS_DDR_MODE_2 0x00000000
165 #define CONFIG_SYS_DDR_INTERVAL 0x06180100
166 #define CONFIG_SYS_DDR_DATA_INIT 0xdeadbeef
167 #define CONFIG_SYS_DDR_CLK_CTRL 0x03800000
168 #define CONFIG_SYS_DDR_OCD_CTRL 0x00000000
169 #define CONFIG_SYS_DDR_OCD_STATUS 0x00000000
170 #define CONFIG_SYS_DDR_CONTROL 0xC3008000 /* Type = DDR2 */
171 #define CONFIG_SYS_DDR_CONTROL2 0x04400010
173 #define CONFIG_SYS_DDR_ERR_INT_EN 0x0000000d
174 #define CONFIG_SYS_DDR_ERR_DIS 0x00000000
175 #define CONFIG_SYS_DDR_SBE 0x00010000
177 /* Make sure required options are set */
178 #ifndef CONFIG_SPD_EEPROM
179 #error ("CONFIG_SPD_EEPROM is required")
182 #undef CONFIG_CLOCKS_IN_MHZ
186 * Memory map -- xxx -this is wrong, needs updating
188 * 0x0000_0000 0x7fff_ffff DDR 2G Cacheable
189 * 0x8000_0000 0xbfff_ffff PCI Express Mem 1G non-cacheable
190 * 0xc000_0000 0xdfff_ffff PCI 512M non-cacheable
191 * 0xe100_0000 0xe3ff_ffff PCI IO range 4M non-cacheable
193 * Localbus cacheable (TBD)
194 * 0xXXXX_XXXX 0xXXXX_XXXX SRAM YZ M Cacheable
196 * Localbus non-cacheable
197 * 0xe000_0000 0xe7ff_ffff Promjet/free 128M non-cacheable
198 * 0xe800_0000 0xefff_ffff FLASH 128M non-cacheable
199 * 0xffa0_0000 0xffaf_ffff NAND 1M non-cacheable
200 * 0xffdf_0000 0xffdf_7fff PIXIS 32K non-cacheable TLB0
201 * 0xffd0_0000 0xffd0_3fff L1 for stack 16K Cacheable TLB0
202 * 0xffe0_0000 0xffef_ffff CCSR 1M non-cacheable
206 * Local Bus Definitions
208 #define CONFIG_SYS_FLASH_BASE 0xe0000000 /* start of FLASH 128M */
209 #ifdef CONFIG_PHYS_64BIT
210 #define CONFIG_SYS_FLASH_BASE_PHYS 0xfe0000000ull
212 #define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE
215 #define CONFIG_FLASH_BR_PRELIM \
216 (BR_PHYS_ADDR((CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000)) \
218 #define CONFIG_FLASH_OR_PRELIM 0xf8000ff7
220 #define CONFIG_SYS_BR1_PRELIM \
221 (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) \
223 #define CONFIG_SYS_OR1_PRELIM 0xf8000ff7
225 #define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000, \
226 CONFIG_SYS_FLASH_BASE_PHYS }
227 #define CONFIG_SYS_FLASH_QUIET_TEST
228 #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */
230 #define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */
231 #define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */
232 #undef CONFIG_SYS_FLASH_CHECKSUM
233 #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
234 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
236 #define CONFIG_SYS_MONITOR_BASE TEXT_BASE /* start of monitor */
238 #if defined(CONFIG_SYS_SPL) || defined(CONFIG_RAMBOOT_NAND) \
239 || defined(CONFIG_RAMBOOT_SDCARD) || defined(CONFIG_RAMBOOT_SPIFLASH)
240 #define CONFIG_SYS_RAMBOOT
242 #undef CONFIG_SYS_RAMBOOT
245 #define CONFIG_FLASH_CFI_DRIVER
246 #define CONFIG_SYS_FLASH_CFI
247 #define CONFIG_SYS_FLASH_EMPTY_INFO
248 #define CONFIG_SYS_FLASH_AMD_CHECK_DQ7
250 #define CONFIG_BOARD_EARLY_INIT_R /* call board_early_init_r function */
252 #define CONFIG_FSL_PIXIS 1 /* use common PIXIS code */
253 #define PIXIS_BASE 0xffdf0000 /* PIXIS registers */
254 #ifdef CONFIG_PHYS_64BIT
255 #define PIXIS_BASE_PHYS 0xfffdf0000ull
257 #define PIXIS_BASE_PHYS PIXIS_BASE
260 #define CONFIG_SYS_BR3_PRELIM (BR_PHYS_ADDR(PIXIS_BASE_PHYS) | BR_PS_8 | BR_V)
261 #define CONFIG_SYS_OR3_PRELIM 0xffffeff7 /* 32KB but only 4k mapped */
263 #define PIXIS_ID 0x0 /* Board ID at offset 0 */
264 #define PIXIS_VER 0x1 /* Board version at offset 1 */
265 #define PIXIS_PVER 0x2 /* PIXIS FPGA version at offset 2 */
266 #define PIXIS_CSR 0x3 /* PIXIS General control/status register */
267 #define PIXIS_RST 0x4 /* PIXIS Reset Control register */
268 #define PIXIS_PWR 0x5 /* PIXIS Power status register */
269 #define PIXIS_AUX 0x6 /* Auxiliary 1 register */
270 #define PIXIS_SPD 0x7 /* Register for SYSCLK speed */
271 #define PIXIS_AUX2 0x8 /* Auxiliary 2 register */
272 #define PIXIS_VCTL 0x10 /* VELA Control Register */
273 #define PIXIS_VSTAT 0x11 /* VELA Status Register */
274 #define PIXIS_VCFGEN0 0x12 /* VELA Config Enable 0 */
275 #define PIXIS_VCFGEN1 0x13 /* VELA Config Enable 1 */
276 #define PIXIS_VCORE0 0x14 /* VELA VCORE0 Register */
277 #define PIXIS_VBOOT 0x16 /* VELA VBOOT Register */
278 #define PIXIS_VBOOT_LBMAP 0xe0 /* VBOOT - CFG_LBMAP */
279 #define PIXIS_VBOOT_LBMAP_NOR0 0x00 /* cfg_lbmap - boot from NOR 0 */
280 #define PIXIS_VBOOT_LBMAP_NOR1 0x01 /* cfg_lbmap - boot from NOR 1 */
281 #define PIXIS_VBOOT_LBMAP_NOR2 0x02 /* cfg_lbmap - boot from NOR 2 */
282 #define PIXIS_VBOOT_LBMAP_NOR3 0x03 /* cfg_lbmap - boot from NOR 3 */
283 #define PIXIS_VBOOT_LBMAP_PJET 0x04 /* cfg_lbmap - boot from projet */
284 #define PIXIS_VBOOT_LBMAP_NAND 0x05 /* cfg_lbmap - boot from NAND */
285 #define PIXIS_VSPEED0 0x17 /* VELA VSpeed 0 */
286 #define PIXIS_VSPEED1 0x18 /* VELA VSpeed 1 */
287 #define PIXIS_VSPEED2 0x19 /* VELA VSpeed 2 */
288 #define PIXIS_VSYSCLK0 0x1A /* VELA SYSCLK0 Register */
289 #define PIXIS_VSYSCLK1 0x1B /* VELA SYSCLK1 Register */
290 #define PIXIS_VSYSCLK2 0x1C /* VELA SYSCLK2 Register */
291 #define PIXIS_VDDRCLK0 0x1D /* VELA DDRCLK0 Register */
292 #define PIXIS_VDDRCLK1 0x1E /* VELA DDRCLK1 Register */
293 #define PIXIS_VDDRCLK2 0x1F /* VELA DDRCLK2 Register */
294 #define PIXIS_VWATCH 0x24 /* Watchdog Register */
295 #define PIXIS_LED 0x25 /* LED Register */
297 #define PIXIS_SPD_SYSCLK 0x7 /* SYSCLK option */
299 /* old pixis referenced names */
300 #define PIXIS_VCLKH 0x19 /* VELA VCLKH register */
301 #define PIXIS_VCLKL 0x1A /* VELA VCLKL register */
302 #define CONFIG_SYS_PIXIS_VBOOT_MASK 0xc0
304 #define CONFIG_SYS_INIT_RAM_LOCK 1
305 #define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 /* Initial L1 address */
306 #define CONFIG_SYS_INIT_RAM_END 0x00004000 /* End of used area in RAM */
308 #define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data */
309 #define CONFIG_SYS_GBL_DATA_OFFSET \
310 (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
311 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
313 #define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
314 #define CONFIG_SYS_MALLOC_LEN (1024 * 1024) /* Reserved for malloc */
316 #ifndef CONFIG_NAND_SPL
317 #define CONFIG_SYS_NAND_BASE 0xffa00000
318 #ifdef CONFIG_PHYS_64BIT
319 #define CONFIG_SYS_NAND_BASE_PHYS 0xfffa00000ull
321 #define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE
324 #define CONFIG_SYS_NAND_BASE 0xfff00000
325 #ifdef CONFIG_PHYS_64BIT
326 #define CONFIG_SYS_NAND_BASE_PHYS 0xffff00000ull
328 #define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE
331 #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE,\
332 CONFIG_SYS_NAND_BASE + 0x40000, \
333 CONFIG_SYS_NAND_BASE + 0x80000, \
334 CONFIG_SYS_NAND_BASE + 0xC0000}
335 #define CONFIG_SYS_MAX_NAND_DEVICE 4
336 #define CONFIG_MTD_NAND_VERIFY_WRITE
337 #define CONFIG_CMD_NAND 1
338 #define CONFIG_NAND_FSL_ELBC 1
339 #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024)
341 /* NAND boot: 4K NAND loader config */
342 #define CONFIG_SYS_NAND_SPL_SIZE 0x1000
343 #define CONFIG_SYS_NAND_U_BOOT_SIZE ((512 << 10) - 0x2000)
344 #define CONFIG_SYS_NAND_U_BOOT_DST (CONFIG_SYS_INIT_L2_ADDR)
345 #define CONFIG_SYS_NAND_U_BOOT_START \
346 (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_NAND_SPL_SIZE)
347 #define CONFIG_SYS_NAND_U_BOOT_OFFS (0)
348 #define CONFIG_SYS_NAND_U_BOOT_RELOC (CONFIG_SYS_INIT_L2_END - 0x2000)
349 #define CONFIG_SYS_NAND_U_BOOT_RELOC_SP ((CONFIG_SYS_INIT_L2_END - 1) & ~0xF)
351 /* NAND flash config */
352 #define CONFIG_NAND_BR_PRELIM \
353 (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
354 | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \
355 | BR_PS_8 /* Port Size = 8 bit */ \
356 | BR_MS_FCM /* MSEL = FCM */ \
358 #define CONFIG_NAND_OR_PRELIM (0xFFFC0000 /* length 256K */ \
359 | OR_FCM_PGS /* Large Page*/ \
367 #ifdef CONFIG_RAMBOOT_NAND
368 #define CONFIG_SYS_BR0_PRELIM CONFIG_NAND_BR_PRELIM /* NAND Base Address */
369 #define CONFIG_SYS_OR0_PRELIM CONFIG_NAND_OR_PRELIM /* NAND Options */
370 #define CONFIG_SYS_BR2_PRELIM CONFIG_FLASH_BR_PRELIM /* NOR Base Address */
371 #define CONFIG_SYS_OR2_PRELIM CONFIG_FLASH_OR_PRELIM /* NOR Options */
373 #define CONFIG_SYS_BR0_PRELIM CONFIG_FLASH_BR_PRELIM /* NOR Base Address */
374 #define CONFIG_SYS_OR0_PRELIM CONFIG_FLASH_OR_PRELIM /* NOR Options */
375 #define CONFIG_SYS_BR2_PRELIM CONFIG_NAND_BR_PRELIM /* NAND Base Address */
376 #define CONFIG_SYS_OR2_PRELIM CONFIG_NAND_OR_PRELIM /* NAND Options */
379 #define CONFIG_SYS_BR4_PRELIM \
380 (BR_PHYS_ADDR((CONFIG_SYS_NAND_BASE_PHYS + 0x40000)) \
381 | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \
382 | BR_PS_8 /* Port Size = 8 bit */ \
383 | BR_MS_FCM /* MSEL = FCM */ \
385 #define CONFIG_SYS_OR4_PRELIM CONFIG_NAND_OR_PRELIM /* NAND Options */
386 #define CONFIG_SYS_BR5_PRELIM \
387 (BR_PHYS_ADDR((CONFIG_SYS_NAND_BASE_PHYS + 0x80000)) \
388 | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \
389 | BR_PS_8 /* Port Size = 8 bit */ \
390 | BR_MS_FCM /* MSEL = FCM */ \
392 #define CONFIG_SYS_OR5_PRELIM CONFIG_NAND_OR_PRELIM /* NAND Options */
394 #define CONFIG_SYS_BR6_PRELIM \
395 (BR_PHYS_ADDR((CONFIG_SYS_NAND_BASE_PHYS + 0xc0000)) \
396 | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \
397 | BR_PS_8 /* Port Size = 8 bit */ \
398 | BR_MS_FCM /* MSEL = FCM */ \
400 #define CONFIG_SYS_OR6_PRELIM CONFIG_NAND_OR_PRELIM /* NAND Options */
402 /* Serial Port - controlled on board with jumper J8
406 #define CONFIG_CONS_INDEX 1
407 #undef CONFIG_SERIAL_SOFTWARE_FIFO
408 #define CONFIG_SYS_NS16550
409 #define CONFIG_SYS_NS16550_SERIAL
410 #define CONFIG_SYS_NS16550_REG_SIZE 1
411 #define CONFIG_SYS_NS16550_CLK get_bus_freq(0)
412 #ifdef CONFIG_NAND_SPL
413 #define CONFIG_NS16550_MIN_FUNCTIONS
416 #define CONFIG_SYS_BAUDRATE_TABLE \
417 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
419 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR + 0x4500)
420 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR + 0x4600)
422 /* Use the HUSH parser */
423 #define CONFIG_SYS_HUSH_PARSER
424 #ifdef CONFIG_SYS_HUSH_PARSER
425 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
429 * Pass open firmware flat tree
431 #define CONFIG_OF_LIBFDT 1
432 #define CONFIG_OF_BOARD_SETUP 1
433 #define CONFIG_OF_STDOUT_VIA_ALIAS 1
438 #define CONFIG_FSL_I2C /* Use FSL common I2C driver */
439 #define CONFIG_HARD_I2C /* I2C with hardware support */
440 #undef CONFIG_SOFT_I2C /* I2C bit-banged */
441 #define CONFIG_I2C_MULTI_BUS
442 #define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
443 #define CONFIG_SYS_I2C_SLAVE 0x7F
444 #define CONFIG_SYS_I2C_NOPROBES {{0, 0x29}} /* Don't probe these addrs */
445 #define CONFIG_SYS_I2C_OFFSET 0x3000
446 #define CONFIG_SYS_I2C2_OFFSET 0x3100
451 #define CONFIG_ID_EEPROM
452 #ifdef CONFIG_ID_EEPROM
453 #define CONFIG_SYS_I2C_EEPROM_NXID
455 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x57
456 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
457 #define CONFIG_SYS_EEPROM_BUS_NUM 1
461 * Memory space is mapped 1-1, but I/O space must start from 0.
464 #define CONFIG_SYS_PCI1_MEM_VIRT 0x80000000
465 #ifdef CONFIG_PHYS_64BIT
466 #define CONFIG_SYS_PCI1_MEM_BUS 0xf0000000
467 #define CONFIG_SYS_PCI1_MEM_PHYS 0xc00000000ull
469 #define CONFIG_SYS_PCI1_MEM_BUS 0x80000000
470 #define CONFIG_SYS_PCI1_MEM_PHYS 0x80000000
472 #define CONFIG_SYS_PCI1_MEM_SIZE 0x10000000 /* 256M */
473 #define CONFIG_SYS_PCI1_IO_VIRT 0xffc00000
474 #define CONFIG_SYS_PCI1_IO_BUS 0x00000000
475 #ifdef CONFIG_PHYS_64BIT
476 #define CONFIG_SYS_PCI1_IO_PHYS 0xfffc00000ull
478 #define CONFIG_SYS_PCI1_IO_PHYS 0xffc00000
480 #define CONFIG_SYS_PCI1_IO_SIZE 0x00010000 /* 64k */
482 /* controller 1, Slot 1, tgtid 1, Base address a000 */
483 #define CONFIG_SYS_PCIE1_MEM_VIRT 0x90000000
484 #ifdef CONFIG_PHYS_64BIT
485 #define CONFIG_SYS_PCIE1_MEM_BUS 0xf8000000
486 #define CONFIG_SYS_PCIE1_MEM_PHYS 0xc10000000ull
488 #define CONFIG_SYS_PCIE1_MEM_BUS 0x90000000
489 #define CONFIG_SYS_PCIE1_MEM_PHYS 0x90000000
491 #define CONFIG_SYS_PCIE1_MEM_SIZE 0x08000000 /* 128M */
492 #define CONFIG_SYS_PCIE1_IO_VIRT 0xffc10000
493 #define CONFIG_SYS_PCIE1_IO_BUS 0x00000000
494 #ifdef CONFIG_PHYS_64BIT
495 #define CONFIG_SYS_PCIE1_IO_PHYS 0xfffc10000ull
497 #define CONFIG_SYS_PCIE1_IO_PHYS 0xffc10000
499 #define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */
501 /* controller 2, Slot 2, tgtid 2, Base address 9000 */
502 #define CONFIG_SYS_PCIE2_MEM_VIRT 0x98000000
503 #ifdef CONFIG_PHYS_64BIT
504 #define CONFIG_SYS_PCIE2_MEM_BUS 0xf8000000
505 #define CONFIG_SYS_PCIE2_MEM_PHYS 0xc18000000ull
507 #define CONFIG_SYS_PCIE2_MEM_BUS 0x98000000
508 #define CONFIG_SYS_PCIE2_MEM_PHYS 0x98000000
510 #define CONFIG_SYS_PCIE2_MEM_SIZE 0x08000000 /* 128M */
511 #define CONFIG_SYS_PCIE2_IO_VIRT 0xffc20000
512 #define CONFIG_SYS_PCIE2_IO_BUS 0x00000000
513 #ifdef CONFIG_PHYS_64BIT
514 #define CONFIG_SYS_PCIE2_IO_PHYS 0xfffc20000ull
516 #define CONFIG_SYS_PCIE2_IO_PHYS 0xffc20000
518 #define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */
520 /* controller 3, direct to uli, tgtid 3, Base address 8000 */
521 #define CONFIG_SYS_PCIE3_MEM_VIRT 0xa0000000
522 #ifdef CONFIG_PHYS_64BIT
523 #define CONFIG_SYS_PCIE3_MEM_BUS 0xe0000000
524 #define CONFIG_SYS_PCIE3_MEM_PHYS 0xc20000000ull
526 #define CONFIG_SYS_PCIE3_MEM_BUS 0xa0000000
527 #define CONFIG_SYS_PCIE3_MEM_PHYS 0xa0000000
529 #define CONFIG_SYS_PCIE3_MEM_SIZE 0x20000000 /* 512M */
530 #define CONFIG_SYS_PCIE3_IO_VIRT 0xffc30000
531 #define CONFIG_SYS_PCIE3_IO_BUS 0x00000000
532 #ifdef CONFIG_PHYS_64BIT
533 #define CONFIG_SYS_PCIE3_IO_PHYS 0xfffc30000ull
535 #define CONFIG_SYS_PCIE3_IO_PHYS 0xffc30000
537 #define CONFIG_SYS_PCIE3_IO_SIZE 0x00010000 /* 64k */
539 #if defined(CONFIG_PCI)
541 #define CONFIG_NET_MULTI
542 #define CONFIG_PCI_PNP /* do pci plug-and-play */
544 /*PCIE video card used*/
545 #define VIDEO_IO_OFFSET CONFIG_SYS_PCIE3_IO_VIRT
547 /*PCI video card used*/
548 /*#define VIDEO_IO_OFFSET CONFIG_SYS_PCI1_IO_VIRT*/
553 #if defined(CONFIG_VIDEO)
554 #define CONFIG_BIOSEMU
555 #define CONFIG_CFB_CONSOLE
556 #define CONFIG_VIDEO_SW_CURSOR
557 #define CONFIG_VGA_AS_SINGLE_DEVICE
558 #define CONFIG_ATI_RADEON_FB
559 #define CONFIG_VIDEO_LOGO
560 /*#define CONFIG_CONSOLE_CURSOR*/
561 #define CONFIG_SYS_ISA_IO_BASE_ADDRESS CONFIG_SYS_PCIE3_IO_VIRT
564 #undef CONFIG_EEPRO100
566 #undef CONFIG_RTL8139
568 #ifndef CONFIG_PCI_PNP
569 #define PCI_ENET0_IOADDR CONFIG_SYS_PCI1_IO_BUS
570 #define PCI_ENET0_MEMADDR CONFIG_SYS_PCI1_IO_BUS
571 #define PCI_IDSEL_NUMBER 0x11 /* IDSEL = AD11 */
574 #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
576 #endif /* CONFIG_PCI */
579 #define CONFIG_LIBATA
580 #define CONFIG_FSL_SATA
582 #define CONFIG_SYS_SATA_MAX_DEVICE 2
584 #define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR
585 #define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA
587 #define CONFIG_SYS_SATA2 CONFIG_SYS_MPC85xx_SATA2_ADDR
588 #define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA
590 #ifdef CONFIG_FSL_SATA
592 #define CONFIG_CMD_SATA
593 #define CONFIG_DOS_PARTITION
594 #define CONFIG_CMD_EXT2
597 #if defined(CONFIG_TSEC_ENET)
599 #ifndef CONFIG_NET_MULTI
600 #define CONFIG_NET_MULTI 1
603 #define CONFIG_MII 1 /* MII PHY management */
604 #define CONFIG_MII_DEFAULT_TSEC 1 /* Allow unregistered phys */
605 #define CONFIG_TSEC1 1
606 #define CONFIG_TSEC1_NAME "eTSEC1"
607 #define CONFIG_TSEC3 1
608 #define CONFIG_TSEC3_NAME "eTSEC3"
610 #define CONFIG_FSL_SGMII_RISER 1
611 #define SGMII_RISER_PHY_OFFSET 0x1c
613 #define TSEC1_PHY_ADDR 1 /* TSEC1 -> PHY1 */
614 #define TSEC3_PHY_ADDR 0 /* TSEC3 -> PHY0 */
616 #define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED)
617 #define TSEC3_FLAGS (TSEC_GIGABIT | TSEC_REDUCED)
619 #define TSEC1_PHYIDX 0
620 #define TSEC3_PHYIDX 0
622 #define CONFIG_ETHPRIME "eTSEC1"
624 #define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */
626 #endif /* CONFIG_TSEC_ENET */
632 #if defined(CONFIG_SYS_RAMBOOT)
633 #if defined(CONFIG_RAMBOOT_NAND)
634 #define CONFIG_ENV_IS_IN_NAND 1
635 #define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE
636 #define CONFIG_ENV_OFFSET ((512 * 1024) + CONFIG_SYS_NAND_BLOCK_SIZE)
637 #elif defined(CONFIG_RAMBOOT_SDCARD) || defined(CONFIG_RAMBOOT_SPIFLASH)
638 #define CONFIG_ENV_IS_NOWHERE 1 /* Store ENV in memory only */
639 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000)
640 #define CONFIG_ENV_SIZE 0x2000
643 #define CONFIG_ENV_IS_IN_FLASH 1
644 #if CONFIG_SYS_MONITOR_BASE > 0xfff80000
645 #define CONFIG_ENV_ADDR 0xfff80000
647 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
649 #define CONFIG_ENV_SIZE 0x2000
650 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */
653 #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
654 #define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
657 * Command line configuration.
659 #include <config_cmd_default.h>
661 #define CONFIG_CMD_IRQ
662 #define CONFIG_CMD_PING
663 #define CONFIG_CMD_I2C
664 #define CONFIG_CMD_MII
665 #define CONFIG_CMD_ELF
666 #define CONFIG_CMD_IRQ
667 #define CONFIG_CMD_SETEXPR
668 #define CONFIG_CMD_REGINFO
670 #if defined(CONFIG_PCI)
671 #define CONFIG_CMD_PCI
672 #define CONFIG_CMD_NET
675 #undef CONFIG_WATCHDOG /* watchdog disabled */
680 #define CONFIG_FSL_ESDHC
681 #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR
682 #define CONFIG_CMD_MMC
683 #define CONFIG_GENERIC_MMC
684 #define CONFIG_CMD_EXT2
685 #define CONFIG_CMD_FAT
686 #define CONFIG_DOS_PARTITION
690 * Miscellaneous configurable options
692 #define CONFIG_SYS_LONGHELP /* undef to save memory */
693 #define CONFIG_CMDLINE_EDITING /* Command-line editing */
694 #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */
695 #define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
696 #if defined(CONFIG_CMD_KGDB)
697 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
699 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
701 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \
702 + sizeof(CONFIG_SYS_PROMPT) + 16) /* Print Buffer Size */
703 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */
704 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
705 #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */
708 * For booting Linux, the board info and command line data
709 * have to be in the first 16 MB of memory, since this is
710 * the maximum mapped by the Linux kernel during initialization.
712 #define CONFIG_SYS_BOOTMAPSZ (16 << 20) /* Initial Memory map for Linux */
715 * Internal Definitions
719 #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
720 #define BOOTFLAG_WARM 0x02 /* Software reboot */
722 #if defined(CONFIG_CMD_KGDB)
723 #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
724 #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
728 * Environment Configuration
731 /* The mac addresses for all ethernet interface */
732 #if defined(CONFIG_TSEC_ENET)
733 #define CONFIG_HAS_ETH0
734 #define CONFIG_ETHADDR 00:E0:0C:02:00:FD
735 #define CONFIG_HAS_ETH1
736 #define CONFIG_ETH1ADDR 00:E0:0C:02:01:FD
737 #define CONFIG_HAS_ETH2
738 #define CONFIG_ETH2ADDR 00:E0:0C:02:02:FD
739 #define CONFIG_HAS_ETH3
740 #define CONFIG_ETH3ADDR 00:E0:0C:02:03:FD
743 #define CONFIG_IPADDR 192.168.1.254
745 #define CONFIG_HOSTNAME unknown
746 #define CONFIG_ROOTPATH /opt/nfsroot
747 #define CONFIG_BOOTFILE uImage
748 #define CONFIG_UBOOTPATH u-boot.bin /* U-Boot image on TFTP server */
750 #define CONFIG_SERVERIP 192.168.1.1
751 #define CONFIG_GATEWAYIP 192.168.1.1
752 #define CONFIG_NETMASK 255.255.255.0
754 /* default location for tftp and bootm */
755 #define CONFIG_LOADADDR 1000000
757 #define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */
758 #undef CONFIG_BOOTARGS /* the boot command will set bootargs */
760 #define CONFIG_BAUDRATE 115200
762 #define CONFIG_EXTRA_ENV_SETTINGS \
764 "uboot=" MK_STR(CONFIG_UBOOTPATH) "\0" \
765 "tftpflash=tftpboot $loadaddr $uboot; " \
766 "protect off " MK_STR(TEXT_BASE) " +$filesize; " \
767 "erase " MK_STR(TEXT_BASE) " +$filesize; " \
768 "cp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize; " \
769 "protect on " MK_STR(TEXT_BASE) " +$filesize; " \
770 "cmp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize\0" \
771 "consoledev=ttyS0\0" \
772 "ramdiskaddr=2000000\0" \
773 "ramdiskfile=8536ds/ramdisk.uboot\0" \
775 "fdtfile=8536ds/mpc8536ds.dtb\0" \
777 "usb_phy_type=ulpi\0"
779 #define CONFIG_HDBOOT \
780 "setenv bootargs root=/dev/$bdev rw " \
781 "console=$consoledev,$baudrate $othbootargs;" \
782 "tftp $loadaddr $bootfile;" \
783 "tftp $fdtaddr $fdtfile;" \
784 "bootm $loadaddr - $fdtaddr"
786 #define CONFIG_NFSBOOTCOMMAND \
787 "setenv bootargs root=/dev/nfs rw " \
788 "nfsroot=$serverip:$rootpath " \
789 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
790 "console=$consoledev,$baudrate $othbootargs;" \
791 "tftp $loadaddr $bootfile;" \
792 "tftp $fdtaddr $fdtfile;" \
793 "bootm $loadaddr - $fdtaddr"
795 #define CONFIG_RAMBOOTCOMMAND \
796 "setenv bootargs root=/dev/ram rw " \
797 "console=$consoledev,$baudrate $othbootargs;" \
798 "tftp $ramdiskaddr $ramdiskfile;" \
799 "tftp $loadaddr $bootfile;" \
800 "tftp $fdtaddr $fdtfile;" \
801 "bootm $loadaddr $ramdiskaddr $fdtaddr"
803 #define CONFIG_BOOTCOMMAND CONFIG_HDBOOT
805 #endif /* __CONFIG_H */