Merge git://git.denx.de/u-boot-dm
[platform/kernel/u-boot.git] / include / configs / MPC837XEMDS.h
1 /*
2  * Copyright (C) 2007 Freescale Semiconductor, Inc.
3  * Dave Liu <daveliu@freescale.com>
4  *
5  * SPDX-License-Identifier:     GPL-2.0+
6  */
7
8 #ifndef __CONFIG_H
9 #define __CONFIG_H
10
11 /*
12  * High Level Configuration Options
13  */
14 #define CONFIG_E300             1 /* E300 family */
15 #define CONFIG_MPC837x          1 /* MPC837x CPU specific */
16 #define CONFIG_MPC837XEMDS      1 /* MPC837XEMDS board specific */
17
18 #define CONFIG_SYS_TEXT_BASE    0xFE000000
19
20 /*
21  * System Clock Setup
22  */
23 #ifdef CONFIG_PCISLAVE
24 #define CONFIG_83XX_PCICLK      66000000 /* in HZ */
25 #else
26 #define CONFIG_83XX_CLKIN       66000000 /* in Hz */
27 #endif
28
29 #ifndef CONFIG_SYS_CLK_FREQ
30 #define CONFIG_SYS_CLK_FREQ     66000000
31 #endif
32
33 /*
34  * Hardware Reset Configuration Word
35  * if CLKIN is 66MHz, then
36  * CSB = 396MHz, CORE = 594MHz, DDRC = 396MHz, LBC = 396MHz
37  */
38 #define CONFIG_SYS_HRCW_LOW (\
39         HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
40         HRCWL_DDR_TO_SCB_CLK_1X1 |\
41         HRCWL_SVCOD_DIV_2 |\
42         HRCWL_CSB_TO_CLKIN_6X1 |\
43         HRCWL_CORE_TO_CSB_1_5X1)
44
45 #ifdef CONFIG_PCISLAVE
46 #define CONFIG_SYS_HRCW_HIGH (\
47         HRCWH_PCI_AGENT |\
48         HRCWH_PCI1_ARBITER_DISABLE |\
49         HRCWH_CORE_ENABLE |\
50         HRCWH_FROM_0XFFF00100 |\
51         HRCWH_BOOTSEQ_DISABLE |\
52         HRCWH_SW_WATCHDOG_DISABLE |\
53         HRCWH_ROM_LOC_LOCAL_16BIT |\
54         HRCWH_RL_EXT_LEGACY |\
55         HRCWH_TSEC1M_IN_RGMII |\
56         HRCWH_TSEC2M_IN_RGMII |\
57         HRCWH_BIG_ENDIAN |\
58         HRCWH_LDP_CLEAR)
59 #else
60 #define CONFIG_SYS_HRCW_HIGH (\
61         HRCWH_PCI_HOST |\
62         HRCWH_PCI1_ARBITER_ENABLE |\
63         HRCWH_CORE_ENABLE |\
64         HRCWH_FROM_0X00000100 |\
65         HRCWH_BOOTSEQ_DISABLE |\
66         HRCWH_SW_WATCHDOG_DISABLE |\
67         HRCWH_ROM_LOC_LOCAL_16BIT |\
68         HRCWH_RL_EXT_LEGACY |\
69         HRCWH_TSEC1M_IN_RGMII |\
70         HRCWH_TSEC2M_IN_RGMII |\
71         HRCWH_BIG_ENDIAN |\
72         HRCWH_LDP_CLEAR)
73 #endif
74
75 /* Arbiter Configuration Register */
76 #define CONFIG_SYS_ACR_PIPE_DEP 3       /* Arbiter pipeline depth is 4 */
77 #define CONFIG_SYS_ACR_RPTCNT   3       /* Arbiter repeat count is 4 */
78
79 /* System Priority Control Register */
80 #define CONFIG_SYS_SPCR_TSECEP  3 /* eTSEC1/2 emergency has highest priority */
81
82 /*
83  * IP blocks clock configuration
84  */
85 #define CONFIG_SYS_SCCR_TSEC1CM 1       /* CSB:eTSEC1 = 1:1 */
86 #define CONFIG_SYS_SCCR_TSEC2CM 1       /* CSB:eTSEC2 = 1:1 */
87 #define CONFIG_SYS_SCCR_SATACM  SCCR_SATACM_2   /* CSB:SATA[0:3] = 2:1 */
88
89 /*
90  * System IO Config
91  */
92 #define CONFIG_SYS_SICRH                0x00000000
93 #define CONFIG_SYS_SICRL                0x00000000
94
95 /*
96  * Output Buffer Impedance
97  */
98 #define CONFIG_SYS_OBIR         0x31100000
99
100 #define CONFIG_BOARD_EARLY_INIT_R
101 #define CONFIG_HWCONFIG
102
103 /*
104  * IMMR new address
105  */
106 #define CONFIG_SYS_IMMR         0xE0000000
107
108 /*
109  * DDR Setup
110  */
111 #define CONFIG_SYS_DDR_BASE             0x00000000 /* DDR is system memory */
112 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_BASE
113 #define CONFIG_SYS_DDR_SDRAM_BASE       CONFIG_SYS_DDR_BASE
114 #define CONFIG_SYS_DDR_SDRAM_CLK_CNTL   DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05
115 #define CONFIG_SYS_83XX_DDR_USES_CS0
116 #define CONFIG_SYS_DDRCDR_VALUE         (DDRCDR_DHC_EN \
117                                         | DDRCDR_ODT \
118                                         | DDRCDR_Q_DRN)
119                                         /* 0x80080001 */ /* ODT 150ohm on SoC */
120
121 #undef CONFIG_DDR_ECC           /* support DDR ECC function */
122 #undef CONFIG_DDR_ECC_CMD       /* Use DDR ECC user commands */
123
124 #define CONFIG_SPD_EEPROM       /* Use SPD EEPROM for DDR setup */
125 #define CONFIG_NEVER_ASSERT_ODT_TO_CPU /* Never assert ODT to internal IOs */
126
127 #if defined(CONFIG_SPD_EEPROM)
128 #define SPD_EEPROM_ADDRESS      0x51 /* I2C address of DDR SODIMM SPD */
129 #else
130 /*
131  * Manually set up DDR parameters
132  * WHITE ELECTRONIC DESIGNS - W3HG64M72EEU403PD4 SO-DIMM
133  * consist of nine chips from SAMSUNG K4T51083QE-ZC(L)D5
134  */
135 #define CONFIG_SYS_DDR_SIZE             512 /* MB */
136 #define CONFIG_SYS_DDR_CS0_BNDS 0x0000001f
137 #define CONFIG_SYS_DDR_CS0_CONFIG       (CSCONFIG_EN \
138                         | CSCONFIG_ODT_RD_NEVER  /* ODT_RD to none */ \
139                         | CSCONFIG_ODT_WR_ONLY_CURRENT  /* ODT_WR to CSn */ \
140                         | CSCONFIG_ROW_BIT_14 \
141                         | CSCONFIG_COL_BIT_10)
142                         /* 0x80010202 */
143 #define CONFIG_SYS_DDR_TIMING_3 0x00000000
144 #define CONFIG_SYS_DDR_TIMING_0 ((0 << TIMING_CFG0_RWT_SHIFT) \
145                                 | (0 << TIMING_CFG0_WRT_SHIFT) \
146                                 | (0 << TIMING_CFG0_RRT_SHIFT) \
147                                 | (0 << TIMING_CFG0_WWT_SHIFT) \
148                                 | (6 << TIMING_CFG0_ACT_PD_EXIT_SHIFT) \
149                                 | (2 << TIMING_CFG0_PRE_PD_EXIT_SHIFT) \
150                                 | (8 << TIMING_CFG0_ODT_PD_EXIT_SHIFT) \
151                                 | (2 << TIMING_CFG0_MRS_CYC_SHIFT))
152                                 /* 0x00620802 */
153 #define CONFIG_SYS_DDR_TIMING_1 ((3 << TIMING_CFG1_PRETOACT_SHIFT) \
154                                 | (9 << TIMING_CFG1_ACTTOPRE_SHIFT) \
155                                 | (3 << TIMING_CFG1_ACTTORW_SHIFT) \
156                                 | (5 << TIMING_CFG1_CASLAT_SHIFT) \
157                                 | (13 << TIMING_CFG1_REFREC_SHIFT) \
158                                 | (3 << TIMING_CFG1_WRREC_SHIFT) \
159                                 | (2 << TIMING_CFG1_ACTTOACT_SHIFT) \
160                                 | (2 << TIMING_CFG1_WRTORD_SHIFT))
161                                 /* 0x3935d322 */
162 #define CONFIG_SYS_DDR_TIMING_2 ((1 << TIMING_CFG2_ADD_LAT_SHIFT) \
163                                 | (6 << TIMING_CFG2_CPO_SHIFT) \
164                                 | (2 << TIMING_CFG2_WR_LAT_DELAY_SHIFT) \
165                                 | (4 << TIMING_CFG2_RD_TO_PRE_SHIFT) \
166                                 | (2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT) \
167                                 | (3 << TIMING_CFG2_CKE_PLS_SHIFT) \
168                                 | (8 << TIMING_CFG2_FOUR_ACT_SHIFT))
169                                 /* 0x131088c8 */
170 #define CONFIG_SYS_DDR_INTERVAL ((0x03E0 << SDRAM_INTERVAL_REFINT_SHIFT) \
171                                 | (0x0100 << SDRAM_INTERVAL_BSTOPRE_SHIFT))
172                                 /* 0x03E00100 */
173 #define CONFIG_SYS_DDR_SDRAM_CFG        0x43000000
174 #define CONFIG_SYS_DDR_SDRAM_CFG2       0x00001000 /* 1 posted refresh */
175 #define CONFIG_SYS_DDR_MODE     ((0x0448 << SDRAM_MODE_ESD_SHIFT) \
176                                 | (0x1432 << SDRAM_MODE_SD_SHIFT))
177                                 /* ODT 150ohm CL=3, AL=1 on SDRAM */
178 #define CONFIG_SYS_DDR_MODE2    0x00000000
179 #endif
180
181 /*
182  * Memory test
183  */
184 #undef CONFIG_SYS_DRAM_TEST             /* memory test, takes time */
185 #define CONFIG_SYS_MEMTEST_START        0x00040000 /* memtest region */
186 #define CONFIG_SYS_MEMTEST_END          0x00140000
187
188 /*
189  * The reserved memory
190  */
191 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
192
193 #if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
194 #define CONFIG_SYS_RAMBOOT
195 #else
196 #undef CONFIG_SYS_RAMBOOT
197 #endif
198
199 /* CONFIG_SYS_MONITOR_LEN must be a multiple of CONFIG_ENV_SECT_SIZE */
200 #define CONFIG_SYS_MONITOR_LEN  (512 * 1024) /* Reserve 512 kB for Mon */
201 #define CONFIG_SYS_MALLOC_LEN   (512 * 1024) /* Reserved for malloc */
202
203 /*
204  * Initial RAM Base Address Setup
205  */
206 #define CONFIG_SYS_INIT_RAM_LOCK        1
207 #define CONFIG_SYS_INIT_RAM_ADDR        0xE6000000 /* Initial RAM address */
208 #define CONFIG_SYS_INIT_RAM_SIZE        0x1000 /* Size of used area in RAM */
209 #define CONFIG_SYS_GBL_DATA_OFFSET      \
210                         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
211
212 /*
213  * Local Bus Configuration & Clock Setup
214  */
215 #define CONFIG_SYS_LCRR_DBYP    LCRR_DBYP
216 #define CONFIG_SYS_LCRR_CLKDIV  LCRR_CLKDIV_8
217 #define CONFIG_SYS_LBC_LBCR             0x00000000
218 #define CONFIG_FSL_ELBC         1
219
220 /*
221  * FLASH on the Local Bus
222  */
223 #define CONFIG_SYS_FLASH_CFI    /* use the Common Flash Interface */
224 #define CONFIG_FLASH_CFI_DRIVER /* use the CFI driver */
225 #define CONFIG_SYS_FLASH_BASE   0xFE000000 /* FLASH base address */
226 #define CONFIG_SYS_FLASH_SIZE   32 /* max FLASH size is 32M */
227 #define CONFIG_SYS_FLASH_PROTECTION     1       /* Use h/w Flash protection. */
228
229                                         /* Window base at flash base */
230 #define CONFIG_SYS_LBLAWBAR0_PRELIM     CONFIG_SYS_FLASH_BASE
231 #define CONFIG_SYS_LBLAWAR0_PRELIM      (LBLAWAR_EN | LBLAWAR_32MB)
232
233 #define CONFIG_SYS_BR0_PRELIM   (CONFIG_SYS_FLASH_BASE \
234                                 | BR_PS_16      /* 16 bit port */ \
235                                 | BR_MS_GPCM    /* MSEL = GPCM */ \
236                                 | BR_V)         /* valid */
237 #define CONFIG_SYS_OR0_PRELIM   (MEG_TO_AM(CONFIG_SYS_FLASH_SIZE) \
238                                 | OR_UPM_XAM \
239                                 | OR_GPCM_CSNT \
240                                 | OR_GPCM_ACS_DIV2 \
241                                 | OR_GPCM_XACS \
242                                 | OR_GPCM_SCY_15 \
243                                 | OR_GPCM_TRLX_SET \
244                                 | OR_GPCM_EHTR_SET \
245                                 | OR_GPCM_EAD)
246                                 /* 0xFE000FF7 */
247
248 #define CONFIG_SYS_MAX_FLASH_BANKS      1 /* number of banks */
249 #define CONFIG_SYS_MAX_FLASH_SECT       256 /* max sectors per device */
250
251 #undef CONFIG_SYS_FLASH_CHECKSUM
252 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000 /* Flash Erase Timeout (ms) */
253 #define CONFIG_SYS_FLASH_WRITE_TOUT     500 /* Flash Write Timeout (ms) */
254
255 /*
256  * BCSR on the Local Bus
257  */
258 #define CONFIG_SYS_BCSR         0xF8000000
259                                         /* Access window base at BCSR base */
260 #define CONFIG_SYS_LBLAWBAR1_PRELIM     CONFIG_SYS_BCSR
261 #define CONFIG_SYS_LBLAWAR1_PRELIM      (LBLAWAR_EN | LBLAWAR_32KB)
262
263 #define CONFIG_SYS_BR1_PRELIM   (CONFIG_SYS_BCSR \
264                                 | BR_PS_8 \
265                                 | BR_MS_GPCM \
266                                 | BR_V)
267                                 /* 0xF8000801 */
268 #define CONFIG_SYS_OR1_PRELIM   (OR_AM_32KB \
269                                 | OR_GPCM_XAM \
270                                 | OR_GPCM_CSNT \
271                                 | OR_GPCM_XACS \
272                                 | OR_GPCM_SCY_15 \
273                                 | OR_GPCM_TRLX_SET \
274                                 | OR_GPCM_EHTR_SET \
275                                 | OR_GPCM_EAD)
276                                 /* 0xFFFFE9F7 */
277
278 /*
279  * NAND Flash on the Local Bus
280  */
281 #define CONFIG_CMD_NAND         1
282 #define CONFIG_SYS_MAX_NAND_DEVICE      1
283 #define CONFIG_NAND_FSL_ELBC    1
284
285 #define CONFIG_SYS_NAND_BASE    0xE0600000
286 #define CONFIG_SYS_BR3_PRELIM   (CONFIG_SYS_NAND_BASE \
287                                 | BR_DECC_CHK_GEN       /* Use HW ECC */ \
288                                 | BR_PS_8               /* 8 bit port */ \
289                                 | BR_MS_FCM             /* MSEL = FCM */ \
290                                 | BR_V)                 /* valid */
291 #define CONFIG_SYS_OR3_PRELIM   (OR_AM_32KB \
292                                 | OR_FCM_BCTLD \
293                                 | OR_FCM_CST \
294                                 | OR_FCM_CHT \
295                                 | OR_FCM_SCY_1 \
296                                 | OR_FCM_RST \
297                                 | OR_FCM_TRLX \
298                                 | OR_FCM_EHTR)
299                                 /* 0xFFFF919E */
300
301 #define CONFIG_SYS_LBLAWBAR3_PRELIM     CONFIG_SYS_NAND_BASE
302 #define CONFIG_SYS_LBLAWAR3_PRELIM      (LBLAWAR_EN | LBLAWAR_32KB)
303
304 /*
305  * Serial Port
306  */
307 #define CONFIG_CONS_INDEX       1
308 #define CONFIG_SYS_NS16550_SERIAL
309 #define CONFIG_SYS_NS16550_REG_SIZE     1
310 #define CONFIG_SYS_NS16550_CLK          get_bus_freq(0)
311
312 #define CONFIG_SYS_BAUDRATE_TABLE  \
313                 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
314
315 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR+0x4500)
316 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR+0x4600)
317
318 /* I2C */
319 #define CONFIG_SYS_I2C
320 #define CONFIG_SYS_I2C_FSL
321 #define CONFIG_SYS_FSL_I2C_SPEED        400000
322 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
323 #define CONFIG_SYS_FSL_I2C_OFFSET       0x3000
324 #define CONFIG_SYS_I2C_NOPROBES         { {0, 0x51} }
325
326 /*
327  * Config on-board RTC
328  */
329 #define CONFIG_RTC_DS1374       /* use ds1374 rtc via i2c */
330 #define CONFIG_SYS_I2C_RTC_ADDR 0x68 /* at address 0x68 */
331
332 /*
333  * General PCI
334  * Addresses are mapped 1-1.
335  */
336 #define CONFIG_SYS_PCI_MEM_BASE         0x80000000
337 #define CONFIG_SYS_PCI_MEM_PHYS         CONFIG_SYS_PCI_MEM_BASE
338 #define CONFIG_SYS_PCI_MEM_SIZE         0x10000000 /* 256M */
339 #define CONFIG_SYS_PCI_MMIO_BASE        0x90000000
340 #define CONFIG_SYS_PCI_MMIO_PHYS        CONFIG_SYS_PCI_MMIO_BASE
341 #define CONFIG_SYS_PCI_MMIO_SIZE        0x10000000 /* 256M */
342 #define CONFIG_SYS_PCI_IO_BASE          0x00000000
343 #define CONFIG_SYS_PCI_IO_PHYS          0xE0300000
344 #define CONFIG_SYS_PCI_IO_SIZE          0x100000 /* 1M */
345
346 #define CONFIG_SYS_PCI_SLV_MEM_LOCAL    CONFIG_SYS_SDRAM_BASE
347 #define CONFIG_SYS_PCI_SLV_MEM_BUS      0x00000000
348 #define CONFIG_SYS_PCI_SLV_MEM_SIZE     0x80000000
349
350 #define CONFIG_SYS_PCIE1_BASE           0xA0000000
351 #define CONFIG_SYS_PCIE1_CFG_BASE       0xA0000000
352 #define CONFIG_SYS_PCIE1_CFG_SIZE       0x08000000
353 #define CONFIG_SYS_PCIE1_MEM_BASE       0xA8000000
354 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xA8000000
355 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x10000000
356 #define CONFIG_SYS_PCIE1_IO_BASE        0x00000000
357 #define CONFIG_SYS_PCIE1_IO_PHYS        0xB8000000
358 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00800000
359
360 #define CONFIG_SYS_PCIE2_BASE           0xC0000000
361 #define CONFIG_SYS_PCIE2_CFG_BASE       0xC0000000
362 #define CONFIG_SYS_PCIE2_CFG_SIZE       0x08000000
363 #define CONFIG_SYS_PCIE2_MEM_BASE       0xC8000000
364 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xC8000000
365 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x10000000
366 #define CONFIG_SYS_PCIE2_IO_BASE        0x00000000
367 #define CONFIG_SYS_PCIE2_IO_PHYS        0xD8000000
368 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00800000
369
370 #ifdef CONFIG_PCI
371 #define CONFIG_PCI_INDIRECT_BRIDGE
372 #ifndef __ASSEMBLY__
373 extern int board_pci_host_broken(void);
374 #endif
375 #define CONFIG_PCIE
376 #define CONFIG_PQ_MDS_PIB       1 /* PQ MDS Platform IO Board */
377
378 #define CONFIG_HAS_FSL_DR_USB   1 /* fixup device tree for the DR USB */
379 #define CONFIG_USB_EHCI_FSL
380 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
381
382 #undef CONFIG_EEPRO100
383 #undef CONFIG_PCI_SCAN_SHOW     /* show pci devices on startup */
384 #define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1957   /* Freescale */
385 #endif /* CONFIG_PCI */
386
387 /*
388  * TSEC
389  */
390 #define CONFIG_TSEC_ENET        /* TSEC ethernet support */
391 #define CONFIG_SYS_TSEC1_OFFSET 0x24000
392 #define CONFIG_SYS_TSEC1        (CONFIG_SYS_IMMR+CONFIG_SYS_TSEC1_OFFSET)
393 #define CONFIG_SYS_TSEC2_OFFSET 0x25000
394 #define CONFIG_SYS_TSEC2        (CONFIG_SYS_IMMR+CONFIG_SYS_TSEC2_OFFSET)
395
396 /*
397  * TSEC ethernet configuration
398  */
399 #define CONFIG_MII              1 /* MII PHY management */
400 #define CONFIG_TSEC1            1
401 #define CONFIG_TSEC1_NAME       "eTSEC0"
402 #define CONFIG_TSEC2            1
403 #define CONFIG_TSEC2_NAME       "eTSEC1"
404 #define TSEC1_PHY_ADDR          2
405 #define TSEC2_PHY_ADDR          3
406 #define TSEC1_PHY_ADDR_SGMII    8
407 #define TSEC2_PHY_ADDR_SGMII    4
408 #define TSEC1_PHYIDX            0
409 #define TSEC2_PHYIDX            0
410 #define TSEC1_FLAGS             (TSEC_GIGABIT | TSEC_REDUCED)
411 #define TSEC2_FLAGS             (TSEC_GIGABIT | TSEC_REDUCED)
412
413 /* Options are: TSEC[0-1] */
414 #define CONFIG_ETHPRIME         "eTSEC1"
415
416 /* SERDES */
417 #define CONFIG_FSL_SERDES
418 #define CONFIG_FSL_SERDES1      0xe3000
419 #define CONFIG_FSL_SERDES2      0xe3100
420
421 /*
422  * SATA
423  */
424 #define CONFIG_LIBATA
425 #define CONFIG_FSL_SATA
426
427 #define CONFIG_SYS_SATA_MAX_DEVICE      2
428 #define CONFIG_SATA1
429 #define CONFIG_SYS_SATA1_OFFSET 0x18000
430 #define CONFIG_SYS_SATA1        (CONFIG_SYS_IMMR + CONFIG_SYS_SATA1_OFFSET)
431 #define CONFIG_SYS_SATA1_FLAGS  FLAGS_DMA
432 #define CONFIG_SATA2
433 #define CONFIG_SYS_SATA2_OFFSET 0x19000
434 #define CONFIG_SYS_SATA2        (CONFIG_SYS_IMMR + CONFIG_SYS_SATA2_OFFSET)
435 #define CONFIG_SYS_SATA2_FLAGS  FLAGS_DMA
436
437 #ifdef CONFIG_FSL_SATA
438 #define CONFIG_LBA48
439 #endif
440
441 /*
442  * Environment
443  */
444 #ifndef CONFIG_SYS_RAMBOOT
445         #define CONFIG_ENV_IS_IN_FLASH  1
446         #define CONFIG_ENV_ADDR         \
447                         (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
448         #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K(one sector) for env */
449         #define CONFIG_ENV_SIZE         0x2000
450 #else
451         #define CONFIG_ENV_IS_NOWHERE   1       /* Store ENV in memory only */
452         #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - 0x1000)
453         #define CONFIG_ENV_SIZE         0x2000
454 #endif
455
456 #define CONFIG_LOADS_ECHO       1       /* echo on for serial download */
457 #define CONFIG_SYS_LOADS_BAUD_CHANGE    1       /* allow baudrate change */
458
459 /*
460  * BOOTP options
461  */
462 #define CONFIG_BOOTP_BOOTFILESIZE
463 #define CONFIG_BOOTP_BOOTPATH
464 #define CONFIG_BOOTP_GATEWAY
465 #define CONFIG_BOOTP_HOSTNAME
466
467 /*
468  * Command line configuration.
469  */
470
471 #if defined(CONFIG_PCI)
472     #define CONFIG_CMD_PCI
473 #endif
474
475 #define CONFIG_CMDLINE_EDITING  1       /* add command line history */
476 #define CONFIG_AUTO_COMPLETE            /* add autocompletion support   */
477
478 #undef CONFIG_WATCHDOG          /* watchdog disabled */
479
480 #ifdef CONFIG_MMC
481 #define CONFIG_FSL_ESDHC
482 #define CONFIG_FSL_ESDHC_PIN_MUX
483 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC83xx_ESDHC_ADDR
484 #endif
485
486 /*
487  * Miscellaneous configurable options
488  */
489 #define CONFIG_SYS_LONGHELP             /* undef to save memory */
490 #define CONFIG_SYS_LOAD_ADDR            0x2000000 /* default load address */
491
492 #if defined(CONFIG_CMD_KGDB)
493         #define CONFIG_SYS_CBSIZE       1024 /* Console I/O Buffer Size */
494 #else
495         #define CONFIG_SYS_CBSIZE       256 /* Console I/O Buffer Size */
496 #endif
497
498                                 /* Print Buffer Size */
499 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
500 #define CONFIG_SYS_MAXARGS      16      /* max number of command args */
501                                 /* Boot Argument Buffer Size */
502 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE
503
504 /*
505  * For booting Linux, the board info and command line data
506  * have to be in the first 256 MB of memory, since this is
507  * the maximum mapped by the Linux kernel during initialization.
508  */
509 #define CONFIG_SYS_BOOTMAPSZ    (256 << 20) /* Initial Memory map for Linux */
510 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
511
512 /*
513  * Core HID Setup
514  */
515 #define CONFIG_SYS_HID0_INIT    0x000000000
516 #define CONFIG_SYS_HID0_FINAL   (HID0_ENABLE_MACHINE_CHECK | \
517                                  HID0_ENABLE_INSTRUCTION_CACHE)
518 #define CONFIG_SYS_HID2         HID2_HBE
519
520 /*
521  * MMU Setup
522  */
523 #define CONFIG_HIGH_BATS        1       /* High BATs supported */
524
525 /* DDR: cache cacheable */
526 #define CONFIG_SYS_SDRAM_LOWER          CONFIG_SYS_SDRAM_BASE
527 #define CONFIG_SYS_SDRAM_UPPER          (CONFIG_SYS_SDRAM_BASE + 0x10000000)
528
529 #define CONFIG_SYS_IBAT0L       (CONFIG_SYS_SDRAM_LOWER \
530                                 | BATL_PP_RW \
531                                 | BATL_MEMCOHERENCE)
532 #define CONFIG_SYS_IBAT0U       (CONFIG_SYS_SDRAM_LOWER \
533                                 | BATU_BL_256M \
534                                 | BATU_VS \
535                                 | BATU_VP)
536 #define CONFIG_SYS_DBAT0L       CONFIG_SYS_IBAT0L
537 #define CONFIG_SYS_DBAT0U       CONFIG_SYS_IBAT0U
538
539 #define CONFIG_SYS_IBAT1L       (CONFIG_SYS_SDRAM_UPPER \
540                                 | BATL_PP_RW \
541                                 | BATL_MEMCOHERENCE)
542 #define CONFIG_SYS_IBAT1U       (CONFIG_SYS_SDRAM_UPPER \
543                                 | BATU_BL_256M \
544                                 | BATU_VS \
545                                 | BATU_VP)
546 #define CONFIG_SYS_DBAT1L       CONFIG_SYS_IBAT1L
547 #define CONFIG_SYS_DBAT1U       CONFIG_SYS_IBAT1U
548
549 /* IMMRBAR, PCI IO and NAND: cache-inhibit and guarded */
550 #define CONFIG_SYS_IBAT2L       (CONFIG_SYS_IMMR \
551                                 | BATL_PP_RW \
552                                 | BATL_CACHEINHIBIT \
553                                 | BATL_GUARDEDSTORAGE)
554 #define CONFIG_SYS_IBAT2U       (CONFIG_SYS_IMMR \
555                                 | BATU_BL_8M \
556                                 | BATU_VS \
557                                 | BATU_VP)
558 #define CONFIG_SYS_DBAT2L       CONFIG_SYS_IBAT2L
559 #define CONFIG_SYS_DBAT2U       CONFIG_SYS_IBAT2U
560
561 /* BCSR: cache-inhibit and guarded */
562 #define CONFIG_SYS_IBAT3L       (CONFIG_SYS_BCSR \
563                                 | BATL_PP_RW \
564                                 | BATL_CACHEINHIBIT \
565                                 | BATL_GUARDEDSTORAGE)
566 #define CONFIG_SYS_IBAT3U       (CONFIG_SYS_BCSR \
567                                 | BATU_BL_128K \
568                                 | BATU_VS \
569                                 | BATU_VP)
570 #define CONFIG_SYS_DBAT3L       CONFIG_SYS_IBAT3L
571 #define CONFIG_SYS_DBAT3U       CONFIG_SYS_IBAT3U
572
573 /* FLASH: icache cacheable, but dcache-inhibit and guarded */
574 #define CONFIG_SYS_IBAT4L       (CONFIG_SYS_FLASH_BASE \
575                                 | BATL_PP_RW \
576                                 | BATL_MEMCOHERENCE)
577 #define CONFIG_SYS_IBAT4U       (CONFIG_SYS_FLASH_BASE \
578                                 | BATU_BL_32M \
579                                 | BATU_VS \
580                                 | BATU_VP)
581 #define CONFIG_SYS_DBAT4L       (CONFIG_SYS_FLASH_BASE \
582                                 | BATL_PP_RW \
583                                 | BATL_CACHEINHIBIT \
584                                 | BATL_GUARDEDSTORAGE)
585 #define CONFIG_SYS_DBAT4U       CONFIG_SYS_IBAT4U
586
587 /* Stack in dcache: cacheable, no memory coherence */
588 #define CONFIG_SYS_IBAT5L       (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_RW)
589 #define CONFIG_SYS_IBAT5U       (CONFIG_SYS_INIT_RAM_ADDR \
590                                 | BATU_BL_128K \
591                                 | BATU_VS \
592                                 | BATU_VP)
593 #define CONFIG_SYS_DBAT5L       CONFIG_SYS_IBAT5L
594 #define CONFIG_SYS_DBAT5U       CONFIG_SYS_IBAT5U
595
596 #ifdef CONFIG_PCI
597 /* PCI MEM space: cacheable */
598 #define CONFIG_SYS_IBAT6L       (CONFIG_SYS_PCI_MEM_PHYS \
599                                 | BATL_PP_RW \
600                                 | BATL_MEMCOHERENCE)
601 #define CONFIG_SYS_IBAT6U       (CONFIG_SYS_PCI_MEM_PHYS \
602                                 | BATU_BL_256M \
603                                 | BATU_VS \
604                                 | BATU_VP)
605 #define CONFIG_SYS_DBAT6L       CONFIG_SYS_IBAT6L
606 #define CONFIG_SYS_DBAT6U       CONFIG_SYS_IBAT6U
607 /* PCI MMIO space: cache-inhibit and guarded */
608 #define CONFIG_SYS_IBAT7L       (CONFIG_SYS_PCI_MMIO_PHYS \
609                                 | BATL_PP_RW \
610                                 | BATL_CACHEINHIBIT \
611                                 | BATL_GUARDEDSTORAGE)
612 #define CONFIG_SYS_IBAT7U       (CONFIG_SYS_PCI_MMIO_PHYS \
613                                 | BATU_BL_256M \
614                                 | BATU_VS \
615                                 | BATU_VP)
616 #define CONFIG_SYS_DBAT7L       CONFIG_SYS_IBAT7L
617 #define CONFIG_SYS_DBAT7U       CONFIG_SYS_IBAT7U
618 #else
619 #define CONFIG_SYS_IBAT6L       (0)
620 #define CONFIG_SYS_IBAT6U       (0)
621 #define CONFIG_SYS_IBAT7L       (0)
622 #define CONFIG_SYS_IBAT7U       (0)
623 #define CONFIG_SYS_DBAT6L       CONFIG_SYS_IBAT6L
624 #define CONFIG_SYS_DBAT6U       CONFIG_SYS_IBAT6U
625 #define CONFIG_SYS_DBAT7L       CONFIG_SYS_IBAT7L
626 #define CONFIG_SYS_DBAT7U       CONFIG_SYS_IBAT7U
627 #endif
628
629 #if defined(CONFIG_CMD_KGDB)
630 #define CONFIG_KGDB_BAUDRATE    230400  /* speed of kgdb serial port */
631 #endif
632
633 /*
634  * Environment Configuration
635  */
636
637 #define CONFIG_ENV_OVERWRITE
638
639 #if defined(CONFIG_TSEC_ENET)
640 #define CONFIG_HAS_ETH0
641 #define CONFIG_HAS_ETH1
642 #endif
643
644 #define CONFIG_LOADADDR 800000  /* default location for tftp and bootm */
645
646 #undef CONFIG_BOOTARGS          /* the boot command will set bootargs */
647
648 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
649         "netdev=eth0\0"                                                 \
650         "consoledev=ttyS0\0"                                            \
651         "ramdiskaddr=1000000\0"                                         \
652         "ramdiskfile=ramfs.83xx\0"                                      \
653         "fdtaddr=780000\0"                                              \
654         "fdtfile=mpc8379_mds.dtb\0"                                     \
655         ""
656
657 #define CONFIG_NFSBOOTCOMMAND                                           \
658         "setenv bootargs root=/dev/nfs rw "                             \
659                 "nfsroot=$serverip:$rootpath "                          \
660                 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:"   \
661                                                         "$netdev:off "  \
662                 "console=$consoledev,$baudrate $othbootargs;"           \
663         "tftp $loadaddr $bootfile;"                                     \
664         "tftp $fdtaddr $fdtfile;"                                       \
665         "bootm $loadaddr - $fdtaddr"
666
667 #define CONFIG_RAMBOOTCOMMAND                                           \
668         "setenv bootargs root=/dev/ram rw "                             \
669                 "console=$consoledev,$baudrate $othbootargs;"           \
670         "tftp $ramdiskaddr $ramdiskfile;"                               \
671         "tftp $loadaddr $bootfile;"                                     \
672         "tftp $fdtaddr $fdtfile;"                                       \
673         "bootm $loadaddr $ramdiskaddr $fdtaddr"
674
675 #define CONFIG_BOOTCOMMAND CONFIG_NFSBOOTCOMMAND
676
677 #endif  /* __CONFIG_H */