include/configs/MPC8315ERDB.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright (C) 2007-2010 Freescale Semiconductor, Inc.
   4  *
   5  * Dave Liu <daveliu@freescale.com>
   6  */
   7
   8 #ifndef __CONFIG_H
   9 #define __CONFIG_H
  10
  11 #define CONFIG_SYS_NAND_U_BOOT_SIZE  (512 << 10)
  12 #define CONFIG_SYS_NAND_U_BOOT_DST   0x00100000
  13 #define CONFIG_SYS_NAND_U_BOOT_START 0x00100100
  14 #define CONFIG_SYS_NAND_U_BOOT_OFFS  16384
  15 #define CONFIG_SYS_NAND_U_BOOT_RELOC 0x00010000
  16
  17 #ifndef CONFIG_SYS_MONITOR_BASE
  18 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
  19 #endif
  20
  21 /*
  22  * High Level Configuration Options
  23  */
  24 #define CONFIG_E300             1 /* E300 family */
  25
  26 /*
  27  * System IO Config
  28  */
  29 #define CONFIG_SYS_SICRH                0x00000000
  30 #define CONFIG_SYS_SICRL                0x00000000 /* 3.3V, no delay */
  31
  32 #define CONFIG_HWCONFIG
  33
  34 #define CONFIG_SYS_SPCR_TSECEP  3 /* eTSEC emergency priority is highest */
  35
  36 /*
  37  * DDR Setup
  38  */
  39 #define CONFIG_SYS_DDR_BASE             0x00000000 /* DDR is system memory */
  40 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_BASE
  41 #define CONFIG_SYS_DDR_SDRAM_BASE       CONFIG_SYS_DDR_BASE
  42 #define CONFIG_SYS_DDR_SDRAM_CLK_CNTL   DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05
  43 #define CONFIG_SYS_DDRCDR_VALUE (DDRCDR_EN \
  44                                 | DDRCDR_PZ_LOZ \
  45                                 | DDRCDR_NZ_LOZ \
  46                                 | DDRCDR_ODT \
  47                                 | DDRCDR_Q_DRN)
  48                                 /* 0x7b880001 */
  49 /*
  50  * Manually set up DDR parameters
  51  * consist of two chips HY5PS12621BFP-C4 from HYNIX
  52  */
  53 #define CONFIG_SYS_DDR_SIZE             128 /* MB */
  54 #define CONFIG_SYS_DDR_CS0_BNDS 0x00000007
  55 #define CONFIG_SYS_DDR_CS0_CONFIG       (CSCONFIG_EN \
  56                                 | CSCONFIG_ODT_RD_NEVER \
  57                                 | CSCONFIG_ODT_WR_ONLY_CURRENT \
  58                                 | CSCONFIG_ROW_BIT_13 \
  59                                 | CSCONFIG_COL_BIT_10)
  60                                 /* 0x80010102 */
  61 #define CONFIG_SYS_DDR_TIMING_3 0x00000000
  62 #define CONFIG_SYS_DDR_TIMING_0 ((0 << TIMING_CFG0_RWT_SHIFT) \
  63                                 | (0 << TIMING_CFG0_WRT_SHIFT) \
  64                                 | (0 << TIMING_CFG0_RRT_SHIFT) \
  65                                 | (0 << TIMING_CFG0_WWT_SHIFT) \
  66                                 | (2 << TIMING_CFG0_ACT_PD_EXIT_SHIFT) \
  67                                 | (2 << TIMING_CFG0_PRE_PD_EXIT_SHIFT) \
  68                                 | (8 << TIMING_CFG0_ODT_PD_EXIT_SHIFT) \
  69                                 | (2 << TIMING_CFG0_MRS_CYC_SHIFT))
  70                                 /* 0x00220802 */
  71 #define CONFIG_SYS_DDR_TIMING_1 ((2 << TIMING_CFG1_PRETOACT_SHIFT) \
  72                                 | (7 << TIMING_CFG1_ACTTOPRE_SHIFT) \
  73                                 | (2 << TIMING_CFG1_ACTTORW_SHIFT) \
  74                                 | (5 << TIMING_CFG1_CASLAT_SHIFT) \
  75                                 | (6 << TIMING_CFG1_REFREC_SHIFT) \
  76                                 | (2 << TIMING_CFG1_WRREC_SHIFT) \
  77                                 | (2 << TIMING_CFG1_ACTTOACT_SHIFT) \
  78                                 | (2 << TIMING_CFG1_WRTORD_SHIFT))
  79                                 /* 0x27256222 */
  80 #define CONFIG_SYS_DDR_TIMING_2 ((1 << TIMING_CFG2_ADD_LAT_SHIFT) \
  81                                 | (4 << TIMING_CFG2_CPO_SHIFT) \
  82                                 | (2 << TIMING_CFG2_WR_LAT_DELAY_SHIFT) \
  83                                 | (2 << TIMING_CFG2_RD_TO_PRE_SHIFT) \
  84                                 | (2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT) \
  85                                 | (3 << TIMING_CFG2_CKE_PLS_SHIFT) \
  86                                 | (5 << TIMING_CFG2_FOUR_ACT_SHIFT))
  87                                 /* 0x121048c5 */
  88 #define CONFIG_SYS_DDR_INTERVAL ((0x0360 << SDRAM_INTERVAL_REFINT_SHIFT) \
  89                                 | (0x0100 << SDRAM_INTERVAL_BSTOPRE_SHIFT))
  90                                 /* 0x03600100 */
  91 #define CONFIG_SYS_DDR_SDRAM_CFG        (SDRAM_CFG_SREN \
  92                                 | SDRAM_CFG_SDRAM_TYPE_DDR2 \
  93                                 | SDRAM_CFG_DBW_32)
  94                                 /* 0x43080000 */
  95 #define CONFIG_SYS_DDR_SDRAM_CFG2       0x00401000 /* 1 posted refresh */
  96 #define CONFIG_SYS_DDR_MODE             ((0x0448 << SDRAM_MODE_ESD_SHIFT) \
  97                                 | (0x0232 << SDRAM_MODE_SD_SHIFT))
  98                                 /* ODT 150ohm CL=3, AL=1 on SDRAM */
  99 #define CONFIG_SYS_DDR_MODE2    0x00000000
 100
 101 /*
 102  * Memory test
 103  */
 104 #undef CONFIG_SYS_DRAM_TEST             /* memory test, takes time */
 105 #define CONFIG_SYS_MEMTEST_START        0x00040000 /* memtest region */
 106 #define CONFIG_SYS_MEMTEST_END          0x00140000
 107
 108 /*
 109  * The reserved memory
 110  */
 111 #define CONFIG_SYS_MONITOR_LEN  (512 * 1024) /* Reserve 512 kB for Mon */
 112 #define CONFIG_SYS_MALLOC_LEN   (512 * 1024) /* Reserved for malloc */
 113
 114 /*
 115  * Initial RAM Base Address Setup
 116  */
 117 #define CONFIG_SYS_INIT_RAM_LOCK        1
 118 #define CONFIG_SYS_INIT_RAM_ADDR        0xE6000000 /* Initial RAM address */
 119 #define CONFIG_SYS_INIT_RAM_SIZE        0x1000 /* Size of used area in RAM */
 120 #define CONFIG_SYS_GBL_DATA_OFFSET      \
 121                         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 122
 123 /*
 124  * Local Bus Configuration & Clock Setup
 125  */
 126 #define CONFIG_SYS_LCRR_DBYP    LCRR_DBYP
 127 #define CONFIG_SYS_LCRR_CLKDIV          LCRR_CLKDIV_2
 128 #define CONFIG_SYS_LBC_LBCR             0x00040000
 129 #define CONFIG_FSL_ELBC         1
 130
 131 /*
 132  * FLASH on the Local Bus
 133  */
 134 #define CONFIG_SYS_FLASH_CFI_WIDTH      FLASH_CFI_16BIT
 135
 136 #define CONFIG_SYS_FLASH_BASE           0xFE000000 /* FLASH base address */
 137 #define CONFIG_SYS_FLASH_SIZE           8       /* FLASH size is 8M */
 138
 139 #define CONFIG_SYS_MAX_FLASH_BANKS      1 /* number of banks */
 140 /* 127 64KB sectors and 8 8KB top sectors per device */
 141 #define CONFIG_SYS_MAX_FLASH_SECT       135
 142
 143 #undef CONFIG_SYS_FLASH_CHECKSUM
 144 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000 /* Flash Erase Timeout (ms) */
 145 #define CONFIG_SYS_FLASH_WRITE_TOUT     500 /* Flash Write Timeout (ms) */
 146
 147 /*
 148  * NAND Flash on the Local Bus
 149  */
 150
 151 #ifdef CONFIG_NAND_SPL
 152 #define CONFIG_SYS_NAND_BASE            0xFFF00000
 153 #else
 154 #define CONFIG_SYS_NAND_BASE            0xE0600000
 155 #endif
 156
 157 #define CONFIG_MTD_PARTITION
 158
 159 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 160 #define CONFIG_NAND_FSL_ELBC            1
 161 #define CONFIG_SYS_NAND_BLOCK_SIZE      16384
 162 #define CONFIG_SYS_NAND_WINDOW_SIZE    (32 * 1024)     /* 0x00008000 */
 163
 164 #define CONFIG_SYS_NAND_U_BOOT_SIZE  (512 << 10)
 165 #define CONFIG_SYS_NAND_U_BOOT_DST   0x00100000
 166 #define CONFIG_SYS_NAND_U_BOOT_START 0x00100100
 167 #define CONFIG_SYS_NAND_U_BOOT_OFFS  16384
 168 #define CONFIG_SYS_NAND_U_BOOT_RELOC 0x00010000
 169
 170
 171
 172 /* Still needed for spl_minimal.c */
 173 #define CONFIG_SYS_NAND_BR_PRELIM CONFIG_SYS_BR1_PRELIM
 174 #define CONFIG_SYS_NAND_OR_PRELIM CONFIG_SYS_OR1_PRELIM
 175
 176 #if CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE && \
 177         !defined(CONFIG_NAND_SPL)
 178 #define CONFIG_SYS_RAMBOOT
 179 #else
 180 #undef CONFIG_SYS_RAMBOOT
 181 #endif
 182
 183 /*
 184  * Serial Port
 185  */
 186 #define CONFIG_SYS_NS16550_SERIAL
 187 #define CONFIG_SYS_NS16550_REG_SIZE     1
 188 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0))
 189
 190 #define CONFIG_SYS_BAUDRATE_TABLE  \
 191                 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 192
 193 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR+0x4500)
 194 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR+0x4600)
 195
 196 /* I2C */
 197 #define CONFIG_SYS_I2C
 198 #define CONFIG_SYS_I2C_FSL
 199 #define CONFIG_SYS_FSL_I2C_SPEED        400000
 200 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 201 #define CONFIG_SYS_FSL_I2C_OFFSET       0x3000
 202 #define CONFIG_SYS_I2C_NOPROBES         { {0, 0x51} }
 203
 204 /*
 205  * Board info - revision and where boot from
 206  */
 207 #define CONFIG_SYS_I2C_PCF8574A_ADDR    0x39
 208
 209 /*
 210  * Config on-board RTC
 211  */
 212 #define CONFIG_RTC_DS1337       /* ds1339 on board, use ds1337 rtc via i2c */
 213 #define CONFIG_SYS_I2C_RTC_ADDR 0x68 /* at address 0x68 */
 214
 215 /*
 216  * General PCI
 217  * Addresses are mapped 1-1.
 218  */
 219 #define CONFIG_SYS_PCI_MEM_BASE         0x80000000
 220 #define CONFIG_SYS_PCI_MEM_PHYS         CONFIG_SYS_PCI_MEM_BASE
 221 #define CONFIG_SYS_PCI_MEM_SIZE         0x10000000 /* 256M */
 222 #define CONFIG_SYS_PCI_MMIO_BASE        0x90000000
 223 #define CONFIG_SYS_PCI_MMIO_PHYS        CONFIG_SYS_PCI_MMIO_BASE
 224 #define CONFIG_SYS_PCI_MMIO_SIZE        0x10000000 /* 256M */
 225 #define CONFIG_SYS_PCI_IO_BASE          0x00000000
 226 #define CONFIG_SYS_PCI_IO_PHYS          0xE0300000
 227 #define CONFIG_SYS_PCI_IO_SIZE          0x100000 /* 1M */
 228
 229 #define CONFIG_SYS_PCI_SLV_MEM_LOCAL    CONFIG_SYS_SDRAM_BASE
 230 #define CONFIG_SYS_PCI_SLV_MEM_BUS      0x00000000
 231 #define CONFIG_SYS_PCI_SLV_MEM_SIZE     0x80000000
 232
 233 #define CONFIG_SYS_PCIE1_BASE           0xA0000000
 234 #define CONFIG_SYS_PCIE1_MEM_BASE       0xA0000000
 235 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xA0000000
 236 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x10000000
 237 #define CONFIG_SYS_PCIE1_CFG_BASE       0xB0000000
 238 #define CONFIG_SYS_PCIE1_CFG_SIZE       0x01000000
 239 #define CONFIG_SYS_PCIE1_IO_BASE        0x00000000
 240 #define CONFIG_SYS_PCIE1_IO_PHYS        0xB1000000
 241 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00800000
 242
 243 #define CONFIG_SYS_PCIE2_BASE           0xC0000000
 244 #define CONFIG_SYS_PCIE2_MEM_BASE       0xC0000000
 245 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xC0000000
 246 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x10000000
 247 #define CONFIG_SYS_PCIE2_CFG_BASE       0xD0000000
 248 #define CONFIG_SYS_PCIE2_CFG_SIZE       0x01000000
 249 #define CONFIG_SYS_PCIE2_IO_BASE        0x00000000
 250 #define CONFIG_SYS_PCIE2_IO_PHYS        0xD1000000
 251 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00800000
 252
 253 #define CONFIG_PCI_INDIRECT_BRIDGE
 254 #define CONFIG_PCIE
 255
 256 #define CONFIG_EEPRO100
 257 #undef CONFIG_PCI_SCAN_SHOW     /* show pci devices on startup */
 258 #define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1957   /* Freescale */
 259
 260 #define CONFIG_HAS_FSL_DR_USB
 261 #define CONFIG_SYS_SCCR_USBDRCM         3
 262
 263 #define CONFIG_USB_EHCI_FSL
 264 #define CONFIG_USB_PHY_TYPE     "utmi"
 265 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 266
 267 /*
 268  * TSEC
 269  */
 270 #define CONFIG_SYS_TSEC1_OFFSET 0x24000
 271 #define CONFIG_SYS_TSEC1        (CONFIG_SYS_IMMR+CONFIG_SYS_TSEC1_OFFSET)
 272 #define CONFIG_SYS_TSEC2_OFFSET 0x25000
 273 #define CONFIG_SYS_TSEC2        (CONFIG_SYS_IMMR+CONFIG_SYS_TSEC2_OFFSET)
 274
 275 /*
 276  * TSEC ethernet configuration
 277  */
 278 #define CONFIG_TSEC1            1
 279 #define CONFIG_TSEC1_NAME       "eTSEC0"
 280 #define CONFIG_TSEC2            1
 281 #define CONFIG_TSEC2_NAME       "eTSEC1"
 282 #define TSEC1_PHY_ADDR          0
 283 #define TSEC2_PHY_ADDR          1
 284 #define TSEC1_PHYIDX            0
 285 #define TSEC2_PHYIDX            0
 286 #define TSEC1_FLAGS             TSEC_GIGABIT
 287 #define TSEC2_FLAGS             TSEC_GIGABIT
 288
 289 /* Options are: eTSEC[0-1] */
 290 #define CONFIG_ETHPRIME         "eTSEC1"
 291
 292 /*
 293  * SATA
 294  */
 295 #define CONFIG_SYS_SATA_MAX_DEVICE      2
 296 #define CONFIG_SATA1
 297 #define CONFIG_SYS_SATA1_OFFSET 0x18000
 298 #define CONFIG_SYS_SATA1        (CONFIG_SYS_IMMR + CONFIG_SYS_SATA1_OFFSET)
 299 #define CONFIG_SYS_SATA1_FLAGS  FLAGS_DMA
 300 #define CONFIG_SATA2
 301 #define CONFIG_SYS_SATA2_OFFSET 0x19000
 302 #define CONFIG_SYS_SATA2        (CONFIG_SYS_IMMR + CONFIG_SYS_SATA2_OFFSET)
 303 #define CONFIG_SYS_SATA2_FLAGS  FLAGS_DMA
 304
 305 #ifdef CONFIG_FSL_SATA
 306 #define CONFIG_LBA48
 307 #endif
 308
 309 /*
 310  * Environment
 311  */
 312 #if !defined(CONFIG_SYS_RAMBOOT)
 313         #define CONFIG_ENV_ADDR         \
 314                         (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
 315         #define CONFIG_ENV_SECT_SIZE    0x10000 /* 64K(one sector) for env */
 316         #define CONFIG_ENV_SIZE         0x2000
 317 #else
 318         #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - 0x1000)
 319         #define CONFIG_ENV_SIZE         0x2000
 320 #endif
 321
 322 #define CONFIG_LOADS_ECHO       1       /* echo on for serial download */
 323 #define CONFIG_SYS_LOADS_BAUD_CHANGE    1       /* allow baudrate change */
 324
 325 /*
 326  * BOOTP options
 327  */
 328 #define CONFIG_BOOTP_BOOTFILESIZE
 329
 330 /*
 331  * Command line configuration.
 332  */
 333
 334 #undef CONFIG_WATCHDOG          /* watchdog disabled */
 335
 336 /*
 337  * Miscellaneous configurable options
 338  */
 339 #define CONFIG_SYS_LOAD_ADDR            0x2000000 /* default load address */
 340
 341 /*
 342  * For booting Linux, the board info and command line data
 343  * have to be in the first 256 MB of memory, since this is
 344  * the maximum mapped by the Linux kernel during initialization.
 345  */
 346 #define CONFIG_SYS_BOOTMAPSZ    (256 << 20) /* Initial Memory map for Linux */
 347 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 348
 349 /*
 350  * MMU Setup
 351  */
 352
 353 #if defined(CONFIG_CMD_KGDB)
 354 #define CONFIG_KGDB_BAUDRATE    230400  /* speed of kgdb serial port */
 355 #endif
 356
 357 /*
 358  * Environment Configuration
 359  */
 360
 361 #define CONFIG_ENV_OVERWRITE
 362
 363 #if defined(CONFIG_TSEC_ENET)
 364 #define CONFIG_HAS_ETH0
 365 #define CONFIG_HAS_ETH1
 366 #endif
 367
 368 #define CONFIG_LOADADDR 800000  /* default location for tftp and bootm */
 369
 370 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
 371         "netdev=eth0\0"                                                 \
 372         "consoledev=ttyS0\0"                                            \
 373         "ramdiskaddr=1000000\0"                                         \
 374         "ramdiskfile=ramfs.83xx\0"                                      \
 375         "fdtaddr=780000\0"                                              \
 376         "fdtfile=mpc8315erdb.dtb\0"                                     \
 377         "usb_phy_type=utmi\0"                                           \
 378         ""
 379
 380 #define CONFIG_NFSBOOTCOMMAND                                           \
 381         "setenv bootargs root=/dev/nfs rw "                             \
 382                 "nfsroot=$serverip:$rootpath "                          \
 383                 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:"   \
 384                                                         "$netdev:off "  \
 385                 "console=$consoledev,$baudrate $othbootargs;"           \
 386         "tftp $loadaddr $bootfile;"                                     \
 387         "tftp $fdtaddr $fdtfile;"                                       \
 388         "bootm $loadaddr - $fdtaddr"
 389
 390 #define CONFIG_RAMBOOTCOMMAND                                           \
 391         "setenv bootargs root=/dev/ram rw "                             \
 392                 "console=$consoledev,$baudrate $othbootargs;"           \
 393         "tftp $ramdiskaddr $ramdiskfile;"                               \
 394         "tftp $loadaddr $bootfile;"                                     \
 395         "tftp $fdtaddr $fdtfile;"                                       \
 396         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 397
 398 #define CONFIG_BOOTCOMMAND CONFIG_NFSBOOTCOMMAND
 399
 400 #endif  /* __CONFIG_H */