include/configs/MPC8313ERDB.h

   1 /*
   2  * Copyright (C) Freescale Semiconductor, Inc. 2006, 2010.
   3  *
   4  * See file CREDITS for list of people who contributed to this
   5  * project.
   6  *
   7  * This program is free software; you can redistribute it and/or
   8  * modify it under the terms of the GNU General Public License as
   9  * published by the Free Software Foundation; either version 2 of
  10  * the License, or (at your option) any later version.
  11  *
  12  * This program is distributed in the hope that it will be useful,
  13  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  15  * GNU General Public License for more details.
  16  *
  17  * You should have received a copy of the GNU General Public License
  18  * along with this program; if not, write to the Free Software
  19  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  20  * MA 02111-1307 USA
  21  */
  22 /*
  23  * mpc8313epb board configuration file
  24  */
  25
  26 #ifndef __CONFIG_H
  27 #define __CONFIG_H
  28
  29 /*
  30  * High Level Configuration Options
  31  */
  32 #define CONFIG_E300             1
  33 #define CONFIG_MPC83xx          1
  34 #define CONFIG_MPC831x          1
  35 #define CONFIG_MPC8313          1
  36 #define CONFIG_MPC8313ERDB      1
  37
  38 #ifdef CONFIG_NAND
  39 #define CONFIG_SPL
  40 #define CONFIG_SPL_INIT_MINIMAL
  41 #define CONFIG_SPL_SERIAL_SUPPORT
  42 #define CONFIG_SPL_NAND_SUPPORT
  43 #define CONFIG_SPL_NAND_MINIMAL
  44 #define CONFIG_SPL_FLUSH_IMAGE
  45 #define CONFIG_SPL_TARGET               "u-boot-with-spl.bin"
  46 #define CONFIG_SPL_MPC83XX_WAIT_FOR_NAND
  47
  48 #ifdef CONFIG_SPL_BUILD
  49 #define CONFIG_NS16550_MIN_FUNCTIONS
  50 #endif
  51
  52 #define CONFIG_SYS_TEXT_BASE    0x00100000 /* CONFIG_SYS_NAND_U_BOOT_DST */
  53 #define CONFIG_SYS_TEXT_BASE_SPL 0xfff00000
  54 #define CONFIG_SPL_MAX_SIZE     (4 * 1024)
  55 #define CONFIG_SPL_PAD_TO       0xfff04000
  56
  57 #define CONFIG_SYS_NAND_U_BOOT_SIZE  (512 << 10)
  58 #define CONFIG_SYS_NAND_U_BOOT_DST   0x00100000
  59 #define CONFIG_SYS_NAND_U_BOOT_START 0x00100100
  60 #define CONFIG_SYS_NAND_U_BOOT_OFFS  16384
  61 #define CONFIG_SYS_NAND_U_BOOT_RELOC 0x00010000
  62 #define CONFIG_SYS_NAND_U_BOOT_RELOC_SP (CONFIG_SYS_NAND_U_BOOT_RELOC + 0x10000)
  63
  64 #ifdef CONFIG_SPL_BUILD
  65 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE_SPL /* start of monitor */
  66 #endif
  67
  68 #endif /* CONFIG_NAND */
  69
  70 #ifndef CONFIG_SYS_TEXT_BASE
  71 #define CONFIG_SYS_TEXT_BASE    0xFE000000
  72 #endif
  73
  74 #ifndef CONFIG_SYS_MONITOR_BASE
  75 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
  76 #endif
  77
  78 #define CONFIG_PCI
  79 #define CONFIG_FSL_ELBC 1
  80
  81 #define CONFIG_MISC_INIT_R
  82
  83 /*
  84  * On-board devices
  85  *
  86  * TSEC1 is VSC switch
  87  * TSEC2 is SoC TSEC
  88  */
  89 #define CONFIG_VSC7385_ENET
  90 #define CONFIG_TSEC2
  91
  92 #ifdef CONFIG_SYS_66MHZ
  93 #define CONFIG_83XX_CLKIN       66666667        /* in Hz */
  94 #elif defined(CONFIG_SYS_33MHZ)
  95 #define CONFIG_83XX_CLKIN       33333333        /* in Hz */
  96 #else
  97 #error Unknown oscillator frequency.
  98 #endif
  99
 100 #define CONFIG_SYS_CLK_FREQ     CONFIG_83XX_CLKIN
 101
 102 #define CONFIG_BOARD_EARLY_INIT_F               /* call board_early_init_f */
 103 #define CONFIG_BOARD_EARLY_INIT_R               /* call board_early_init_r */
 104
 105 #define CONFIG_SYS_IMMR         0xE0000000
 106
 107 #if defined(CONFIG_NAND) && !defined(CONFIG_SPL_BUILD)
 108 #define CONFIG_DEFAULT_IMMR     CONFIG_SYS_IMMR
 109 #endif
 110
 111 #define CONFIG_SYS_MEMTEST_START        0x00001000
 112 #define CONFIG_SYS_MEMTEST_END          0x07f00000
 113
 114 /* Early revs of this board will lock up hard when attempting
 115  * to access the PMC registers, unless a JTAG debugger is
 116  * connected, or some resistor modifications are made.
 117  */
 118 #define CONFIG_SYS_8313ERDB_BROKEN_PMC 1
 119
 120 #define CONFIG_SYS_ACR_PIPE_DEP 3       /* Arbiter pipeline depth (0-3) */
 121 #define CONFIG_SYS_ACR_RPTCNT           3       /* Arbiter repeat count (0-7) */
 122
 123 /*
 124  * Device configurations
 125  */
 126
 127 /* Vitesse 7385 */
 128
 129 #ifdef CONFIG_VSC7385_ENET
 130
 131 #define CONFIG_TSEC1
 132
 133 /* The flash address and size of the VSC7385 firmware image */
 134 #define CONFIG_VSC7385_IMAGE            0xFE7FE000
 135 #define CONFIG_VSC7385_IMAGE_SIZE       8192
 136
 137 #endif
 138
 139 /*
 140  * DDR Setup
 141  */
 142 #define CONFIG_SYS_DDR_BASE             0x00000000 /* DDR is system memory*/
 143 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_BASE
 144 #define CONFIG_SYS_DDR_SDRAM_BASE       CONFIG_SYS_DDR_BASE
 145
 146 /*
 147  * Manually set up DDR parameters, as this board does not
 148  * seem to have the SPD connected to I2C.
 149  */
 150 #define CONFIG_SYS_DDR_SIZE     128             /* MB */
 151 #define CONFIG_SYS_DDR_CS0_CONFIG       (CSCONFIG_EN \
 152                                 | CSCONFIG_ODT_RD_NEVER \
 153                                 | CSCONFIG_ODT_WR_ONLY_CURRENT \
 154                                 | CSCONFIG_ROW_BIT_13 \
 155                                 | CSCONFIG_COL_BIT_10)
 156                                 /* 0x80010102 */
 157
 158 #define CONFIG_SYS_DDR_TIMING_3 0x00000000
 159 #define CONFIG_SYS_DDR_TIMING_0 ((0 << TIMING_CFG0_RWT_SHIFT) \
 160                                 | (0 << TIMING_CFG0_WRT_SHIFT) \
 161                                 | (0 << TIMING_CFG0_RRT_SHIFT) \
 162                                 | (0 << TIMING_CFG0_WWT_SHIFT) \
 163                                 | (2 << TIMING_CFG0_ACT_PD_EXIT_SHIFT) \
 164                                 | (2 << TIMING_CFG0_PRE_PD_EXIT_SHIFT) \
 165                                 | (8 << TIMING_CFG0_ODT_PD_EXIT_SHIFT) \
 166                                 | (2 << TIMING_CFG0_MRS_CYC_SHIFT))
 167                                 /* 0x00220802 */
 168 #define CONFIG_SYS_DDR_TIMING_1 ((3 << TIMING_CFG1_PRETOACT_SHIFT) \
 169                                 | (8 << TIMING_CFG1_ACTTOPRE_SHIFT) \
 170                                 | (3 << TIMING_CFG1_ACTTORW_SHIFT) \
 171                                 | (5 << TIMING_CFG1_CASLAT_SHIFT) \
 172                                 | (10 << TIMING_CFG1_REFREC_SHIFT) \
 173                                 | (3 << TIMING_CFG1_WRREC_SHIFT) \
 174                                 | (2 << TIMING_CFG1_ACTTOACT_SHIFT) \
 175                                 | (2 << TIMING_CFG1_WRTORD_SHIFT))
 176                                 /* 0x3835a322 */
 177 #define CONFIG_SYS_DDR_TIMING_2 ((1 << TIMING_CFG2_ADD_LAT_SHIFT) \
 178                                 | (5 << TIMING_CFG2_CPO_SHIFT) \
 179                                 | (2 << TIMING_CFG2_WR_LAT_DELAY_SHIFT) \
 180                                 | (2 << TIMING_CFG2_RD_TO_PRE_SHIFT) \
 181                                 | (2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT) \
 182                                 | (3 << TIMING_CFG2_CKE_PLS_SHIFT) \
 183                                 | (6 << TIMING_CFG2_FOUR_ACT_SHIFT))
 184                                 /* 0x129048c6 */ /* P9-45,may need tuning */
 185 #define CONFIG_SYS_DDR_INTERVAL ((1296 << SDRAM_INTERVAL_REFINT_SHIFT) \
 186                                 | (1280 << SDRAM_INTERVAL_BSTOPRE_SHIFT))
 187                                 /* 0x05100500 */
 188 #if defined(CONFIG_DDR_2T_TIMING)
 189 #define CONFIG_SYS_SDRAM_CFG    (SDRAM_CFG_SREN \
 190                                 | SDRAM_CFG_SDRAM_TYPE_DDR2 \
 191                                 | SDRAM_CFG_DBW_32 \
 192                                 | SDRAM_CFG_2T_EN)
 193                                 /* 0x43088000 */
 194 #else
 195 #define CONFIG_SYS_SDRAM_CFG    (SDRAM_CFG_SREN \
 196                                 | SDRAM_CFG_SDRAM_TYPE_DDR2 \
 197                                 | SDRAM_CFG_DBW_32)
 198                                 /* 0x43080000 */
 199 #endif
 200 #define CONFIG_SYS_SDRAM_CFG2           0x00401000
 201 /* set burst length to 8 for 32-bit data path */
 202 #define CONFIG_SYS_DDR_MODE     ((0x4448 << SDRAM_MODE_ESD_SHIFT) \
 203                                 | (0x0632 << SDRAM_MODE_SD_SHIFT))
 204                                 /* 0x44480632 */
 205 #define CONFIG_SYS_DDR_MODE_2   0x8000C000
 206
 207 #define CONFIG_SYS_DDR_CLK_CNTL DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05
 208                                 /*0x02000000*/
 209 #define CONFIG_SYS_DDRCDR_VALUE (DDRCDR_EN \
 210                                 | DDRCDR_PZ_NOMZ \
 211                                 | DDRCDR_NZ_NOMZ \
 212                                 | DDRCDR_M_ODR)
 213
 214 /*
 215  * FLASH on the Local Bus
 216  */
 217 #define CONFIG_SYS_FLASH_CFI            /* use the Common Flash Interface */
 218 #define CONFIG_FLASH_CFI_DRIVER         /* use the CFI driver */
 219 #define CONFIG_SYS_FLASH_BASE           0xFE000000      /* start of FLASH   */
 220 #define CONFIG_SYS_FLASH_SIZE           8       /* flash size in MB */
 221 #define CONFIG_SYS_FLASH_PROTECTION     1       /* Use h/w Flash protection. */
 222 #define CONFIG_SYS_FLASH_EMPTY_INFO             /* display empty sectors */
 223 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE       /* buffer up multiple bytes */
 224
 225 #define CONFIG_SYS_NOR_BR_PRELIM        (CONFIG_SYS_FLASH_BASE \
 226                                         | BR_PS_16      /* 16 bit port */ \
 227                                         | BR_MS_GPCM    /* MSEL = GPCM */ \
 228                                         | BR_V)         /* valid */
 229 #define CONFIG_SYS_NOR_OR_PRELIM        (MEG_TO_AM(CONFIG_SYS_FLASH_SIZE) \
 230                                 | OR_GPCM_XACS \
 231                                 | OR_GPCM_SCY_9 \
 232                                 | OR_GPCM_EHTR \
 233                                 | OR_GPCM_EAD)
 234                                 /* 0xFF006FF7   TODO SLOW 16 MB flash size */
 235                                         /* window base at flash base */
 236 #define CONFIG_SYS_LBLAWBAR0_PRELIM     CONFIG_SYS_FLASH_BASE
 237                                         /* 16 MB window size */
 238 #define CONFIG_SYS_LBLAWAR0_PRELIM      (LBLAWAR_EN | LBLAWAR_16MB)
 239
 240 #define CONFIG_SYS_MAX_FLASH_BANKS      1       /* number of banks */
 241 #define CONFIG_SYS_MAX_FLASH_SECT       135     /* sectors per device */
 242
 243 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 244 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 245
 246 #if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) && \
 247         !defined(CONFIG_SPL_BUILD)
 248 #define CONFIG_SYS_RAMBOOT
 249 #endif
 250
 251 #define CONFIG_SYS_INIT_RAM_LOCK        1
 252 #define CONFIG_SYS_INIT_RAM_ADDR        0xFD000000      /* Initial RAM addr */
 253 #define CONFIG_SYS_INIT_RAM_SIZE        0x1000  /* Size of used area in RAM*/
 254
 255 #define CONFIG_SYS_GBL_DATA_OFFSET      \
 256                         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 257 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 258
 259 /* CONFIG_SYS_MONITOR_LEN must be a multiple of CONFIG_ENV_SECT_SIZE */
 260 #define CONFIG_SYS_MONITOR_LEN  (384 * 1024)    /* Reserve 384 kB for Mon */
 261 #define CONFIG_SYS_MALLOC_LEN   (512 * 1024)    /* Reserved for malloc */
 262
 263 /*
 264  * Local Bus LCRR and LBCR regs
 265  */
 266 #define CONFIG_SYS_LCRR_EADC    LCRR_EADC_1
 267 #define CONFIG_SYS_LCRR_CLKDIV  LCRR_CLKDIV_4
 268 #define CONFIG_SYS_LBC_LBCR     (0x00040000 /* TODO */ \
 269                                 | (0xFF << LBCR_BMT_SHIFT) \
 270                                 | 0xF)  /* 0x0004ff0f */
 271
 272                                 /* LB refresh timer prescal, 266MHz/32 */
 273 #define CONFIG_SYS_LBC_MRTPR    0x20000000  /*TODO */
 274
 275 /* drivers/mtd/nand/nand.c */
 276 #if defined(CONFIG_NAND) && defined(CONFIG_SPL_BUILD)
 277 #define CONFIG_SYS_NAND_BASE            0xFFF00000
 278 #else
 279 #define CONFIG_SYS_NAND_BASE            0xE2800000
 280 #endif
 281
 282 #define CONFIG_MTD_DEVICE
 283 #define CONFIG_MTD_PARTITION
 284 #define CONFIG_CMD_MTDPARTS
 285 #define MTDIDS_DEFAULT                  "nand0=e2800000.flash"
 286 #define MTDPARTS_DEFAULT                \
 287         "mtdparts=e2800000.flash:512k(uboot),128k(env),3m@1m(kernel),-(fs)"
 288
 289 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 290 #define CONFIG_MTD_NAND_VERIFY_WRITE
 291 #define CONFIG_CMD_NAND 1
 292 #define CONFIG_NAND_FSL_ELBC 1
 293 #define CONFIG_SYS_NAND_BLOCK_SIZE 16384
 294 #define CONFIG_SYS_NAND_WINDOW_SIZE (32 * 1024)
 295
 296
 297 #define CONFIG_SYS_NAND_BR_PRELIM       (CONFIG_SYS_NAND_BASE \
 298                                 | BR_DECC_CHK_GEN       /* Use HW ECC */ \
 299                                 | BR_PS_8               /* 8 bit port */ \
 300                                 | BR_MS_FCM             /* MSEL = FCM */ \
 301                                 | BR_V)                 /* valid */
 302 #define CONFIG_SYS_NAND_OR_PRELIM       \
 303                                 (P2SZ_TO_AM(CONFIG_SYS_NAND_WINDOW_SIZE) \
 304                                 | OR_FCM_CSCT \
 305                                 | OR_FCM_CST \
 306                                 | OR_FCM_CHT \
 307                                 | OR_FCM_SCY_1 \
 308                                 | OR_FCM_TRLX \
 309                                 | OR_FCM_EHTR)
 310                                 /* 0xFFFF8396 */
 311
 312 #ifdef CONFIG_NAND
 313 #define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_NAND_BR_PRELIM
 314 #define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_NAND_OR_PRELIM
 315 #define CONFIG_SYS_BR1_PRELIM CONFIG_SYS_NOR_BR_PRELIM
 316 #define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_NOR_OR_PRELIM
 317 #else
 318 #define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_NOR_BR_PRELIM
 319 #define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_NOR_OR_PRELIM
 320 #define CONFIG_SYS_BR1_PRELIM CONFIG_SYS_NAND_BR_PRELIM
 321 #define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_NAND_OR_PRELIM
 322 #endif
 323
 324 #define CONFIG_SYS_LBLAWBAR1_PRELIM     CONFIG_SYS_NAND_BASE
 325 #define CONFIG_SYS_LBLAWAR1_PRELIM      (LBLAWAR_EN | LBLAWAR_32KB)
 326
 327 #define CONFIG_SYS_NAND_LBLAWBAR_PRELIM CONFIG_SYS_LBLAWBAR1_PRELIM
 328 #define CONFIG_SYS_NAND_LBLAWAR_PRELIM CONFIG_SYS_LBLAWAR1_PRELIM
 329
 330 /* local bus write LED / read status buffer (BCSR) mapping */
 331 #define CONFIG_SYS_BCSR_ADDR            0xFA000000
 332 #define CONFIG_SYS_BCSR_SIZE            (32 * 1024)     /* 0x00008000 */
 333                                         /* map at 0xFA000000 on LCS3 */
 334 #define CONFIG_SYS_BR3_PRELIM           (CONFIG_SYS_BCSR_ADDR \
 335                                         | BR_PS_8       /* 8 bit port */ \
 336                                         | BR_MS_GPCM    /* MSEL = GPCM */ \
 337                                         | BR_V)         /* valid */
 338                                         /* 0xFA000801 */
 339 #define CONFIG_SYS_OR3_PRELIM           (P2SZ_TO_AM(CONFIG_SYS_BCSR_SIZE) \
 340                                         | OR_GPCM_CSNT \
 341                                         | OR_GPCM_ACS_DIV2 \
 342                                         | OR_GPCM_XACS \
 343                                         | OR_GPCM_SCY_15 \
 344                                         | OR_GPCM_TRLX_SET \
 345                                         | OR_GPCM_EHTR_SET \
 346                                         | OR_GPCM_EAD)
 347                                         /* 0xFFFF8FF7 */
 348 #define CONFIG_SYS_LBLAWBAR3_PRELIM     CONFIG_SYS_BCSR_ADDR
 349 #define CONFIG_SYS_LBLAWAR3_PRELIM      (LBLAWAR_EN | LBLAWAR_32KB)
 350
 351 /* Vitesse 7385 */
 352
 353 #ifdef CONFIG_VSC7385_ENET
 354
 355                                         /* VSC7385 Base address on LCS2 */
 356 #define CONFIG_SYS_VSC7385_BASE         0xF0000000
 357 #define CONFIG_SYS_VSC7385_SIZE         (128 * 1024)    /* 0x00020000 */
 358
 359 #define CONFIG_SYS_BR2_PRELIM           (CONFIG_SYS_VSC7385_BASE \
 360                                         | BR_PS_8       /* 8 bit port */ \
 361                                         | BR_MS_GPCM    /* MSEL = GPCM */ \
 362                                         | BR_V)         /* valid */
 363 #define CONFIG_SYS_OR2_PRELIM           (P2SZ_TO_AM(CONFIG_SYS_VSC7385_SIZE) \
 364                                         | OR_GPCM_CSNT \
 365                                         | OR_GPCM_XACS \
 366                                         | OR_GPCM_SCY_15 \
 367                                         | OR_GPCM_SETA \
 368                                         | OR_GPCM_TRLX_SET \
 369                                         | OR_GPCM_EHTR_SET \
 370                                         | OR_GPCM_EAD)
 371                                         /* 0xFFFE09FF */
 372
 373                                         /* Access window base at VSC7385 base */
 374 #define CONFIG_SYS_LBLAWBAR2_PRELIM     CONFIG_SYS_VSC7385_BASE
 375 #define CONFIG_SYS_LBLAWAR2_PRELIM      (LBLAWAR_EN | LBLAWAR_128KB)
 376
 377 #endif
 378
 379 /* pass open firmware flat tree */
 380 #define CONFIG_OF_LIBFDT        1
 381 #define CONFIG_OF_BOARD_SETUP   1
 382 #define CONFIG_OF_STDOUT_VIA_ALIAS      1
 383
 384 #define CONFIG_MPC83XX_GPIO 1
 385 #define CONFIG_CMD_GPIO 1
 386
 387 /*
 388  * Serial Port
 389  */
 390 #define CONFIG_CONS_INDEX       1
 391 #define CONFIG_SYS_NS16550
 392 #define CONFIG_SYS_NS16550_SERIAL
 393 #define CONFIG_SYS_NS16550_REG_SIZE     1
 394
 395 #define CONFIG_SYS_BAUDRATE_TABLE       \
 396         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}
 397
 398 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR+0x4500)
 399 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR+0x4600)
 400
 401 /* Use the HUSH parser */
 402 #define CONFIG_SYS_HUSH_PARSER
 403
 404 /* I2C */
 405 #define CONFIG_HARD_I2C                 /* I2C with hardware support*/
 406 #define CONFIG_FSL_I2C
 407 #define CONFIG_I2C_MULTI_BUS
 408 #define CONFIG_SYS_I2C_SPEED    400000  /* I2C speed and slave address */
 409 #define CONFIG_SYS_I2C_SLAVE    0x7F
 410 #define CONFIG_SYS_I2C_NOPROBES { {0, 0x69} } /* Don't probe these addrs */
 411 #define CONFIG_SYS_I2C_OFFSET   0x3000
 412 #define CONFIG_SYS_I2C2_OFFSET  0x3100
 413
 414 /*
 415  * General PCI
 416  * Addresses are mapped 1-1.
 417  */
 418 #define CONFIG_SYS_PCI1_MEM_BASE        0x80000000
 419 #define CONFIG_SYS_PCI1_MEM_PHYS        CONFIG_SYS_PCI1_MEM_BASE
 420 #define CONFIG_SYS_PCI1_MEM_SIZE        0x10000000      /* 256M */
 421 #define CONFIG_SYS_PCI1_MMIO_BASE       0x90000000
 422 #define CONFIG_SYS_PCI1_MMIO_PHYS       CONFIG_SYS_PCI1_MMIO_BASE
 423 #define CONFIG_SYS_PCI1_MMIO_SIZE       0x10000000      /* 256M */
 424 #define CONFIG_SYS_PCI1_IO_BASE 0x00000000
 425 #define CONFIG_SYS_PCI1_IO_PHYS 0xE2000000
 426 #define CONFIG_SYS_PCI1_IO_SIZE 0x00100000      /* 1M */
 427
 428 #define CONFIG_PCI_PNP          /* do pci plug-and-play */
 429 #define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1057   /* Motorola */
 430
 431 /*
 432  * TSEC
 433  */
 434 #define CONFIG_TSEC_ENET                /* TSEC ethernet support */
 435
 436 #define CONFIG_GMII                     /* MII PHY management */
 437
 438 #ifdef CONFIG_TSEC1
 439 #define CONFIG_HAS_ETH0
 440 #define CONFIG_TSEC1_NAME       "TSEC0"
 441 #define CONFIG_SYS_TSEC1_OFFSET 0x24000
 442 #define TSEC1_PHY_ADDR          0x1c
 443 #define TSEC1_FLAGS             TSEC_GIGABIT
 444 #define TSEC1_PHYIDX            0
 445 #endif
 446
 447 #ifdef CONFIG_TSEC2
 448 #define CONFIG_HAS_ETH1
 449 #define CONFIG_TSEC2_NAME       "TSEC1"
 450 #define CONFIG_SYS_TSEC2_OFFSET 0x25000
 451 #define TSEC2_PHY_ADDR          4
 452 #define TSEC2_FLAGS             TSEC_GIGABIT
 453 #define TSEC2_PHYIDX            0
 454 #endif
 455
 456
 457 /* Options are: TSEC[0-1] */
 458 #define CONFIG_ETHPRIME                 "TSEC1"
 459
 460 /*
 461  * Configure on-board RTC
 462  */
 463 #define CONFIG_RTC_DS1337
 464 #define CONFIG_SYS_I2C_RTC_ADDR         0x68
 465
 466 /*
 467  * Environment
 468  */
 469 #if defined(CONFIG_NAND)
 470         #define CONFIG_ENV_IS_IN_NAND   1
 471         #define CONFIG_ENV_OFFSET               (512 * 1024)
 472         #define CONFIG_ENV_SECT_SIZE    CONFIG_SYS_NAND_BLOCK_SIZE
 473         #define CONFIG_ENV_SIZE         CONFIG_ENV_SECT_SIZE
 474         #define CONFIG_ENV_SIZE_REDUND  CONFIG_ENV_SIZE
 475         #define CONFIG_ENV_RANGE                (CONFIG_ENV_SECT_SIZE * 4)
 476         #define CONFIG_ENV_OFFSET_REDUND        \
 477                                         (CONFIG_ENV_OFFSET + CONFIG_ENV_RANGE)
 478 #elif !defined(CONFIG_SYS_RAMBOOT)
 479         #define CONFIG_ENV_IS_IN_FLASH  1
 480         #define CONFIG_ENV_ADDR         \
 481                         (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
 482         #define CONFIG_ENV_SECT_SIZE    0x10000 /* 64K(one sector) for env */
 483         #define CONFIG_ENV_SIZE         0x2000
 484
 485 /* Address and size of Redundant Environment Sector */
 486 #else
 487         #define CONFIG_ENV_IS_NOWHERE   1       /* Store ENV in memory only */
 488         #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - 0x1000)
 489         #define CONFIG_ENV_SIZE         0x2000
 490 #endif
 491
 492 #define CONFIG_LOADS_ECHO       1       /* echo on for serial download */
 493 #define CONFIG_SYS_LOADS_BAUD_CHANGE    1       /* allow baudrate change */
 494
 495 /*
 496  * BOOTP options
 497  */
 498 #define CONFIG_BOOTP_BOOTFILESIZE
 499 #define CONFIG_BOOTP_BOOTPATH
 500 #define CONFIG_BOOTP_GATEWAY
 501 #define CONFIG_BOOTP_HOSTNAME
 502
 503
 504 /*
 505  * Command line configuration.
 506  */
 507 #include <config_cmd_default.h>
 508
 509 #define CONFIG_CMD_PING
 510 #define CONFIG_CMD_DHCP
 511 #define CONFIG_CMD_I2C
 512 #define CONFIG_CMD_MII
 513 #define CONFIG_CMD_DATE
 514 #define CONFIG_CMD_PCI
 515
 516 #if defined(CONFIG_SYS_RAMBOOT) && !defined(CONFIG_NAND)
 517     #undef CONFIG_CMD_SAVEENV
 518     #undef CONFIG_CMD_LOADS
 519 #endif
 520
 521 #define CONFIG_CMDLINE_EDITING 1
 522 #define CONFIG_AUTO_COMPLETE    /* add autocompletion support   */
 523
 524 /*
 525  * Miscellaneous configurable options
 526  */
 527 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 528 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 529 #define CONFIG_SYS_PROMPT       "=> "           /* Monitor Command Prompt */
 530 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size */
 531
 532                                                 /* Print Buffer Size */
 533 #define CONFIG_SYS_PBSIZE       \
 534                         (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 535 #define CONFIG_SYS_MAXARGS      16      /* max number of command args */
 536                                 /* Boot Argument Buffer Size */
 537 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE
 538 #define CONFIG_SYS_HZ           1000    /* decrementer freq: 1ms ticks */
 539
 540 /*
 541  * For booting Linux, the board info and command line data
 542  * have to be in the first 256 MB of memory, since this is
 543  * the maximum mapped by the Linux kernel during initialization.
 544  */
 545                                 /* Initial Memory map for Linux*/
 546 #define CONFIG_SYS_BOOTMAPSZ    (256 << 20)
 547
 548 #define CONFIG_SYS_RCWH_PCIHOST 0x80000000      /* PCIHOST  */
 549
 550 #ifdef CONFIG_SYS_66MHZ
 551
 552 /* 66MHz IN, 133MHz CSB, 266 DDR, 266 CORE */
 553 /* 0x62040000 */
 554 #define CONFIG_SYS_HRCW_LOW (\
 555         0x20000000 /* reserved, must be set */ |\
 556         HRCWL_DDRCM |\
 557         HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
 558         HRCWL_DDR_TO_SCB_CLK_2X1 |\
 559         HRCWL_CSB_TO_CLKIN_2X1 |\
 560         HRCWL_CORE_TO_CSB_2X1)
 561
 562 #define CONFIG_SYS_NS16550_CLK (CONFIG_83XX_CLKIN * 2)
 563
 564 #elif defined(CONFIG_SYS_33MHZ)
 565
 566 /* 33MHz IN, 165MHz CSB, 330 DDR, 330 CORE */
 567 /* 0x65040000 */
 568 #define CONFIG_SYS_HRCW_LOW (\
 569         0x20000000 /* reserved, must be set */ |\
 570         HRCWL_DDRCM |\
 571         HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
 572         HRCWL_DDR_TO_SCB_CLK_2X1 |\
 573         HRCWL_CSB_TO_CLKIN_5X1 |\
 574         HRCWL_CORE_TO_CSB_2X1)
 575
 576 #define CONFIG_SYS_NS16550_CLK (CONFIG_83XX_CLKIN * 5)
 577
 578 #endif
 579
 580 #define CONFIG_SYS_HRCW_HIGH_BASE (\
 581         HRCWH_PCI_HOST |\
 582         HRCWH_PCI1_ARBITER_ENABLE |\
 583         HRCWH_CORE_ENABLE |\
 584         HRCWH_BOOTSEQ_DISABLE |\
 585         HRCWH_SW_WATCHDOG_DISABLE |\
 586         HRCWH_TSEC1M_IN_RGMII |\
 587         HRCWH_TSEC2M_IN_RGMII |\
 588         HRCWH_BIG_ENDIAN)
 589
 590 #ifdef CONFIG_NAND
 591 #define CONFIG_SYS_HRCW_HIGH (CONFIG_SYS_HRCW_HIGH_BASE |\
 592                        HRCWH_FROM_0XFFF00100 |\
 593                        HRCWH_ROM_LOC_NAND_SP_8BIT |\
 594                        HRCWH_RL_EXT_NAND)
 595 #else
 596 #define CONFIG_SYS_HRCW_HIGH (CONFIG_SYS_HRCW_HIGH_BASE |\
 597                        HRCWH_FROM_0X00000100 |\
 598                        HRCWH_ROM_LOC_LOCAL_16BIT |\
 599                        HRCWH_RL_EXT_LEGACY)
 600 #endif
 601
 602 /* System IO Config */
 603 #define CONFIG_SYS_SICRH        (SICRH_TSOBI1 | SICRH_TSOBI2)   /* RGMII */
 604                         /* Enable Internal USB Phy and GPIO on LCD Connector */
 605 #define CONFIG_SYS_SICRL        (SICRL_USBDR_10 | SICRL_LBC)
 606
 607 #define CONFIG_SYS_HID0_INIT    0x000000000
 608 #define CONFIG_SYS_HID0_FINAL   (HID0_ENABLE_MACHINE_CHECK | \
 609                                  HID0_ENABLE_INSTRUCTION_CACHE | \
 610                                  HID0_ENABLE_DYNAMIC_POWER_MANAGMENT)
 611
 612 #define CONFIG_SYS_HID2 HID2_HBE
 613
 614 #define CONFIG_HIGH_BATS        1       /* High BATs supported */
 615
 616 /* DDR @ 0x00000000 */
 617 #define CONFIG_SYS_IBAT0L       (CONFIG_SYS_SDRAM_BASE | BATL_PP_RW)
 618 #define CONFIG_SYS_IBAT0U       (CONFIG_SYS_SDRAM_BASE \
 619                                 | BATU_BL_256M \
 620                                 | BATU_VS \
 621                                 | BATU_VP)
 622
 623 /* PCI @ 0x80000000 */
 624 #define CONFIG_SYS_IBAT1L       (CONFIG_SYS_PCI1_MEM_BASE | BATL_PP_RW)
 625 #define CONFIG_SYS_IBAT1U       (CONFIG_SYS_PCI1_MEM_BASE \
 626                                 | BATU_BL_256M \
 627                                 | BATU_VS \
 628                                 | BATU_VP)
 629 #define CONFIG_SYS_IBAT2L       (CONFIG_SYS_PCI1_MMIO_BASE \
 630                                 | BATL_PP_RW \
 631                                 | BATL_CACHEINHIBIT \
 632                                 | BATL_GUARDEDSTORAGE)
 633 #define CONFIG_SYS_IBAT2U       (CONFIG_SYS_PCI1_MMIO_BASE \
 634                                 | BATU_BL_256M \
 635                                 | BATU_VS \
 636                                 | BATU_VP)
 637
 638 /* PCI2 not supported on 8313 */
 639 #define CONFIG_SYS_IBAT3L       (0)
 640 #define CONFIG_SYS_IBAT3U       (0)
 641 #define CONFIG_SYS_IBAT4L       (0)
 642 #define CONFIG_SYS_IBAT4U       (0)
 643
 644 /* IMMRBAR @ 0xE0000000, PCI IO @ 0xE2000000 & BCSR @ 0xE2400000 */
 645 #define CONFIG_SYS_IBAT5L       (CONFIG_SYS_IMMR \
 646                                 | BATL_PP_RW \
 647                                 | BATL_CACHEINHIBIT \
 648                                 | BATL_GUARDEDSTORAGE)
 649 #define CONFIG_SYS_IBAT5U       (CONFIG_SYS_IMMR \
 650                                 | BATU_BL_256M \
 651                                 | BATU_VS \
 652                                 | BATU_VP)
 653
 654 /* SDRAM @ 0xF0000000, stack in DCACHE 0xFDF00000 & FLASH @ 0xFE000000 */
 655 #define CONFIG_SYS_IBAT6L       (0xF0000000 | BATL_PP_RW | BATL_GUARDEDSTORAGE)
 656 #define CONFIG_SYS_IBAT6U       (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
 657
 658 #define CONFIG_SYS_IBAT7L       (0)
 659 #define CONFIG_SYS_IBAT7U       (0)
 660
 661 #define CONFIG_SYS_DBAT0L       CONFIG_SYS_IBAT0L
 662 #define CONFIG_SYS_DBAT0U       CONFIG_SYS_IBAT0U
 663 #define CONFIG_SYS_DBAT1L       CONFIG_SYS_IBAT1L
 664 #define CONFIG_SYS_DBAT1U       CONFIG_SYS_IBAT1U
 665 #define CONFIG_SYS_DBAT2L       CONFIG_SYS_IBAT2L
 666 #define CONFIG_SYS_DBAT2U       CONFIG_SYS_IBAT2U
 667 #define CONFIG_SYS_DBAT3L       CONFIG_SYS_IBAT3L
 668 #define CONFIG_SYS_DBAT3U       CONFIG_SYS_IBAT3U
 669 #define CONFIG_SYS_DBAT4L       CONFIG_SYS_IBAT4L
 670 #define CONFIG_SYS_DBAT4U       CONFIG_SYS_IBAT4U
 671 #define CONFIG_SYS_DBAT5L       CONFIG_SYS_IBAT5L
 672 #define CONFIG_SYS_DBAT5U       CONFIG_SYS_IBAT5U
 673 #define CONFIG_SYS_DBAT6L       CONFIG_SYS_IBAT6L
 674 #define CONFIG_SYS_DBAT6U       CONFIG_SYS_IBAT6U
 675 #define CONFIG_SYS_DBAT7L       CONFIG_SYS_IBAT7L
 676 #define CONFIG_SYS_DBAT7U       CONFIG_SYS_IBAT7U
 677
 678 /*
 679  * Environment Configuration
 680  */
 681 #define CONFIG_ENV_OVERWRITE
 682
 683 #define CONFIG_NETDEV           "eth1"
 684
 685 #define CONFIG_HOSTNAME         mpc8313erdb
 686 #define CONFIG_ROOTPATH         "/nfs/root/path"
 687 #define CONFIG_BOOTFILE         "uImage"
 688                                 /* U-Boot image on TFTP server */
 689 #define CONFIG_UBOOTPATH        "u-boot.bin"
 690 #define CONFIG_FDTFILE          "mpc8313erdb.dtb"
 691
 692                                 /* default location for tftp and bootm */
 693 #define CONFIG_LOADADDR         800000
 694 #define CONFIG_BOOTDELAY        6       /* -1 disables auto-boot */
 695 #define CONFIG_BAUDRATE         115200
 696
 697 #define CONFIG_EXTRA_ENV_SETTINGS \
 698         "netdev=" CONFIG_NETDEV "\0"                                    \
 699         "ethprime=TSEC1\0"                                              \
 700         "uboot=" CONFIG_UBOOTPATH "\0"                                  \
 701         "tftpflash=tftpboot $loadaddr $uboot; "                         \
 702                 "protect off " __stringify(CONFIG_SYS_TEXT_BASE)        \
 703                         " +$filesize; " \
 704                 "erase " __stringify(CONFIG_SYS_TEXT_BASE)              \
 705                         " +$filesize; " \
 706                 "cp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE)     \
 707                         " $filesize; "  \
 708                 "protect on " __stringify(CONFIG_SYS_TEXT_BASE)         \
 709                         " +$filesize; " \
 710                 "cmp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE)    \
 711                         " $filesize\0"  \
 712         "fdtaddr=780000\0"                                              \
 713         "fdtfile=" CONFIG_FDTFILE "\0"                                  \
 714         "console=ttyS0\0"                                               \
 715         "setbootargs=setenv bootargs "                                  \
 716                 "root=$rootdev rw console=$console,$baudrate $othbootargs\0" \
 717         "setipargs=setenv bootargs nfsroot=$serverip:$rootpath "         \
 718                 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:"\
 719                                                         "$netdev:off " \
 720                 "root=$rootdev rw console=$console,$baudrate $othbootargs\0"
 721
 722 #define CONFIG_NFSBOOTCOMMAND                                           \
 723         "setenv rootdev /dev/nfs;"                                      \
 724         "run setbootargs;"                                              \
 725         "run setipargs;"                                                \
 726         "tftp $loadaddr $bootfile;"                                     \
 727         "tftp $fdtaddr $fdtfile;"                                       \
 728         "bootm $loadaddr - $fdtaddr"
 729
 730 #define CONFIG_RAMBOOTCOMMAND                                           \
 731         "setenv rootdev /dev/ram;"                                      \
 732         "run setbootargs;"                                              \
 733         "tftp $ramdiskaddr $ramdiskfile;"                               \
 734         "tftp $loadaddr $bootfile;"                                     \
 735         "tftp $fdtaddr $fdtfile;"                                       \
 736         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 737
 738 #endif  /* __CONFIG_H */