2 * Copyright (C) Freescale Semiconductor, Inc. 2006, 2010.
4 * See file CREDITS for list of people who contributed to this
7 * This program is free software; you can redistribute it and/or
8 * modify it under the terms of the GNU General Public License as
9 * published by the Free Software Foundation; either version 2 of
10 * the License, or (at your option) any later version.
12 * This program is distributed in the hope that it will be useful,
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 * GNU General Public License for more details.
17 * You should have received a copy of the GNU General Public License
18 * along with this program; if not, write to the Free Software
19 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
23 * mpc8313epb board configuration file
30 * High Level Configuration Options
33 #define CONFIG_MPC83xx 1
34 #define CONFIG_MPC831x 1
35 #define CONFIG_MPC8313 1
36 #define CONFIG_MPC8313ERDB 1
38 #define CONFIG_SYS_NAND_U_BOOT_SIZE (512 << 10)
39 #define CONFIG_SYS_NAND_U_BOOT_DST 0x00100000
40 #define CONFIG_SYS_NAND_U_BOOT_START 0x00100100
41 #define CONFIG_SYS_NAND_U_BOOT_OFFS 16384
42 #define CONFIG_SYS_NAND_U_BOOT_RELOC 0x00010000
43 #define CONFIG_SYS_NAND_U_BOOT_RELOC_SP (CONFIG_SYS_NAND_U_BOOT_RELOC + 0x10000)
45 #ifdef CONFIG_NAND_U_BOOT
46 #define CONFIG_SYS_TEXT_BASE 0x00100000 /* CONFIG_SYS_NAND_U_BOOT_DST */
47 #define CONFIG_SYS_TEXT_BASE_SPL 0xfff00000
48 #ifdef CONFIG_NAND_SPL
49 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE_SPL /* start of monitor */
50 #endif /* CONFIG_NAND_SPL */
51 #endif /* CONFIG_NAND_U_BOOT */
53 #ifndef CONFIG_SYS_TEXT_BASE
54 #define CONFIG_SYS_TEXT_BASE 0xFE000000
57 #ifndef CONFIG_SYS_MONITOR_BASE
58 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
62 #define CONFIG_FSL_ELBC 1
64 #define CONFIG_MISC_INIT_R
72 #define CONFIG_VSC7385_ENET
75 #ifdef CONFIG_SYS_66MHZ
76 #define CONFIG_83XX_CLKIN 66666667 /* in Hz */
77 #elif defined(CONFIG_SYS_33MHZ)
78 #define CONFIG_83XX_CLKIN 33333333 /* in Hz */
80 #error Unknown oscillator frequency.
83 #define CONFIG_SYS_CLK_FREQ CONFIG_83XX_CLKIN
85 #define CONFIG_BOARD_EARLY_INIT_F /* call board_pre_init */
87 #define CONFIG_SYS_IMMR 0xE0000000
89 #if defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
90 #define CONFIG_DEFAULT_IMMR CONFIG_SYS_IMMR
93 #define CONFIG_SYS_MEMTEST_START 0x00001000
94 #define CONFIG_SYS_MEMTEST_END 0x07f00000
96 /* Early revs of this board will lock up hard when attempting
97 * to access the PMC registers, unless a JTAG debugger is
98 * connected, or some resistor modifications are made.
100 #define CONFIG_SYS_8313ERDB_BROKEN_PMC 1
102 #define CONFIG_SYS_ACR_PIPE_DEP 3 /* Arbiter pipeline depth (0-3) */
103 #define CONFIG_SYS_ACR_RPTCNT 3 /* Arbiter repeat count (0-7) */
106 * Device configurations
111 #ifdef CONFIG_VSC7385_ENET
115 /* The flash address and size of the VSC7385 firmware image */
116 #define CONFIG_VSC7385_IMAGE 0xFE7FE000
117 #define CONFIG_VSC7385_IMAGE_SIZE 8192
124 #define CONFIG_SYS_DDR_BASE 0x00000000 /* DDR is system memory*/
125 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_BASE
126 #define CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_BASE
129 * Manually set up DDR parameters, as this board does not
130 * seem to have the SPD connected to I2C.
132 #define CONFIG_SYS_DDR_SIZE 128 /* MB */
133 #define CONFIG_SYS_DDR_CONFIG (CSCONFIG_EN \
134 | CSCONFIG_ODT_RD_NEVER \
135 | CSCONFIG_ODT_WR_ONLY_CURRENT \
136 | CSCONFIG_ROW_BIT_13 \
137 | CSCONFIG_COL_BIT_10)
140 #define CONFIG_SYS_DDR_TIMING_3 0x00000000
141 #define CONFIG_SYS_DDR_TIMING_0 ((0 << TIMING_CFG0_RWT_SHIFT) \
142 | (0 << TIMING_CFG0_WRT_SHIFT) \
143 | (0 << TIMING_CFG0_RRT_SHIFT) \
144 | (0 << TIMING_CFG0_WWT_SHIFT) \
145 | (2 << TIMING_CFG0_ACT_PD_EXIT_SHIFT) \
146 | (2 << TIMING_CFG0_PRE_PD_EXIT_SHIFT) \
147 | (8 << TIMING_CFG0_ODT_PD_EXIT_SHIFT) \
148 | (2 << TIMING_CFG0_MRS_CYC_SHIFT))
150 #define CONFIG_SYS_DDR_TIMING_1 ((3 << TIMING_CFG1_PRETOACT_SHIFT) \
151 | (8 << TIMING_CFG1_ACTTOPRE_SHIFT) \
152 | (3 << TIMING_CFG1_ACTTORW_SHIFT) \
153 | (5 << TIMING_CFG1_CASLAT_SHIFT) \
154 | (10 << TIMING_CFG1_REFREC_SHIFT) \
155 | (3 << TIMING_CFG1_WRREC_SHIFT) \
156 | (2 << TIMING_CFG1_ACTTOACT_SHIFT) \
157 | (2 << TIMING_CFG1_WRTORD_SHIFT))
159 #define CONFIG_SYS_DDR_TIMING_2 ((1 << TIMING_CFG2_ADD_LAT_SHIFT) \
160 | (5 << TIMING_CFG2_CPO_SHIFT) \
161 | (2 << TIMING_CFG2_WR_LAT_DELAY_SHIFT) \
162 | (2 << TIMING_CFG2_RD_TO_PRE_SHIFT) \
163 | (2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT) \
164 | (3 << TIMING_CFG2_CKE_PLS_SHIFT) \
165 | (6 << TIMING_CFG2_FOUR_ACT_SHIFT))
166 /* 0x129048c6 */ /* P9-45,may need tuning */
167 #define CONFIG_SYS_DDR_INTERVAL ((1296 << SDRAM_INTERVAL_REFINT_SHIFT) \
168 | (1280 << SDRAM_INTERVAL_BSTOPRE_SHIFT))
170 #if defined(CONFIG_DDR_2T_TIMING)
171 #define CONFIG_SYS_SDRAM_CFG (SDRAM_CFG_SREN \
172 | SDRAM_CFG_SDRAM_TYPE_DDR2 \
177 #define CONFIG_SYS_SDRAM_CFG (SDRAM_CFG_SREN \
178 | SDRAM_CFG_SDRAM_TYPE_DDR2 \
182 #define CONFIG_SYS_SDRAM_CFG2 0x00401000
183 /* set burst length to 8 for 32-bit data path */
184 #define CONFIG_SYS_DDR_MODE ((0x4448 << SDRAM_MODE_ESD_SHIFT) \
185 | (0x0632 << SDRAM_MODE_SD_SHIFT))
187 #define CONFIG_SYS_DDR_MODE_2 0x8000C000
189 #define CONFIG_SYS_DDR_CLK_CNTL DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05
191 #define CONFIG_SYS_DDRCDR_VALUE (DDRCDR_EN \
197 * FLASH on the Local Bus
199 #define CONFIG_SYS_FLASH_CFI /* use the Common Flash Interface */
200 #define CONFIG_FLASH_CFI_DRIVER /* use the CFI driver */
201 #define CONFIG_SYS_FLASH_BASE 0xFE000000 /* start of FLASH */
202 #define CONFIG_SYS_FLASH_SIZE 8 /* flash size in MB */
203 #define CONFIG_SYS_FLASH_PROTECTION 1 /* Use h/w Flash protection. */
204 #define CONFIG_SYS_FLASH_EMPTY_INFO /* display empty sectors */
205 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE /* buffer up multiple bytes */
207 #define CONFIG_SYS_NOR_BR_PRELIM (CONFIG_SYS_FLASH_BASE \
208 | (2 << BR_PS_SHIFT) /* 16 bit port */ \
210 #define CONFIG_SYS_NOR_OR_PRELIM (0xFF800000 /* 8 MByte */ \
215 /* 0xFF006FF7 TODO SLOW 16 MB flash size */
216 /* window base at flash base */
217 #define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE
218 #define CONFIG_SYS_LBLAWAR0_PRELIM 0x80000017 /* 16 MB window size */
220 #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */
221 #define CONFIG_SYS_MAX_FLASH_SECT 135 /* sectors per device */
223 #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
224 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
226 #if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) && \
227 !defined(CONFIG_NAND_SPL)
228 #define CONFIG_SYS_RAMBOOT
231 #define CONFIG_SYS_INIT_RAM_LOCK 1
232 #define CONFIG_SYS_INIT_RAM_ADDR 0xFD000000 /* Initial RAM addr */
233 #define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* Size of used area in RAM*/
235 #define CONFIG_SYS_GBL_DATA_OFFSET \
236 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
237 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
239 /* CONFIG_SYS_MONITOR_LEN must be a multiple of CONFIG_ENV_SECT_SIZE */
240 #define CONFIG_SYS_MONITOR_LEN (384 * 1024) /* Reserve 384 kB for Mon */
241 #define CONFIG_SYS_MALLOC_LEN (512 * 1024) /* Reserved for malloc */
244 * Local Bus LCRR and LBCR regs
246 #define CONFIG_SYS_LCRR_EADC LCRR_EADC_1
247 #define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_4
248 #define CONFIG_SYS_LBC_LBCR (0x00040000 /* TODO */ \
249 | (0xFF << LBCR_BMT_SHIFT) \
250 | 0xF) /* 0x0004ff0f */
252 /* LB refresh timer prescal, 266MHz/32 */
253 #define CONFIG_SYS_LBC_MRTPR 0x20000000 /*TODO */
255 /* drivers/mtd/nand/nand.c */
256 #ifdef CONFIG_NAND_SPL
257 #define CONFIG_SYS_NAND_BASE 0xFFF00000
259 #define CONFIG_SYS_NAND_BASE 0xE2800000
262 #define CONFIG_MTD_DEVICE
263 #define CONFIG_MTD_PARTITION
264 #define CONFIG_CMD_MTDPARTS
265 #define MTDIDS_DEFAULT "nand0=e2800000.flash"
266 #define MTDPARTS_DEFAULT \
267 "mtdparts=e0600000.flash:512k(uboot),128k(env),3m@1m(kernel),-(fs)"
269 #define CONFIG_SYS_MAX_NAND_DEVICE 1
270 #define CONFIG_MTD_NAND_VERIFY_WRITE
271 #define CONFIG_CMD_NAND 1
272 #define CONFIG_NAND_FSL_ELBC 1
273 #define CONFIG_SYS_NAND_BLOCK_SIZE 16384
276 #define CONFIG_SYS_NAND_BR_PRELIM (CONFIG_SYS_NAND_BASE \
277 | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \
278 | BR_PS_8 /* 8 bit port */ \
279 | BR_MS_FCM /* MSEL = FCM */ \
281 #define CONFIG_SYS_NAND_OR_PRELIM (0xFFFF8000 /* length 32K */ \
290 #ifdef CONFIG_NAND_U_BOOT
291 #define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_NAND_BR_PRELIM
292 #define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_NAND_OR_PRELIM
293 #define CONFIG_SYS_BR1_PRELIM CONFIG_SYS_NOR_BR_PRELIM
294 #define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_NOR_OR_PRELIM
296 #define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_NOR_BR_PRELIM
297 #define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_NOR_OR_PRELIM
298 #define CONFIG_SYS_BR1_PRELIM CONFIG_SYS_NAND_BR_PRELIM
299 #define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_NAND_OR_PRELIM
302 #define CONFIG_SYS_LBLAWBAR1_PRELIM CONFIG_SYS_NAND_BASE
303 #define CONFIG_SYS_LBLAWAR1_PRELIM 0x8000000E /* 32KB */
305 #define CONFIG_SYS_NAND_LBLAWBAR_PRELIM CONFIG_SYS_LBLAWBAR1_PRELIM
306 #define CONFIG_SYS_NAND_LBLAWAR_PRELIM CONFIG_SYS_LBLAWAR1_PRELIM
308 /* local bus read write buffer mapping */
309 #define CONFIG_SYS_BR3_PRELIM 0xFA000801 /* map at 0xFA000000 */
310 #define CONFIG_SYS_OR3_PRELIM 0xFFFF8FF7 /* 32kB */
311 #define CONFIG_SYS_LBLAWBAR3_PRELIM 0xFA000000
312 #define CONFIG_SYS_LBLAWAR3_PRELIM 0x8000000E /* 32KB */
316 #define CONFIG_SYS_VSC7385_BASE 0xF0000000
318 #ifdef CONFIG_VSC7385_ENET
320 /* VSC7385 Base address */
321 #define CONFIG_SYS_BR2_PRELIM 0xf0000801
322 /* VSC7385, 128K bytes*/
323 #define CONFIG_SYS_OR2_PRELIM 0xfffe09ff
324 /* Access window base at VSC7385 base */
325 #define CONFIG_SYS_LBLAWBAR2_PRELIM CONFIG_SYS_VSC7385_BASE
326 /* Access window size 128K */
327 #define CONFIG_SYS_LBLAWAR2_PRELIM 0x80000010
331 /* pass open firmware flat tree */
332 #define CONFIG_OF_LIBFDT 1
333 #define CONFIG_OF_BOARD_SETUP 1
334 #define CONFIG_OF_STDOUT_VIA_ALIAS 1
339 #define CONFIG_CONS_INDEX 1
340 #define CONFIG_SYS_NS16550
341 #define CONFIG_SYS_NS16550_SERIAL
342 #define CONFIG_SYS_NS16550_REG_SIZE 1
344 #define CONFIG_SYS_BAUDRATE_TABLE \
345 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}
347 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR+0x4500)
348 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR+0x4600)
350 /* Use the HUSH parser */
351 #define CONFIG_SYS_HUSH_PARSER
352 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
355 #define CONFIG_HARD_I2C /* I2C with hardware support*/
356 #define CONFIG_FSL_I2C
357 #define CONFIG_I2C_MULTI_BUS
358 #define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
359 #define CONFIG_SYS_I2C_SLAVE 0x7F
360 #define CONFIG_SYS_I2C_NOPROBES { {0, 0x69} } /* Don't probe these addrs */
361 #define CONFIG_SYS_I2C_OFFSET 0x3000
362 #define CONFIG_SYS_I2C2_OFFSET 0x3100
366 * Addresses are mapped 1-1.
368 #define CONFIG_SYS_PCI1_MEM_BASE 0x80000000
369 #define CONFIG_SYS_PCI1_MEM_PHYS CONFIG_SYS_PCI1_MEM_BASE
370 #define CONFIG_SYS_PCI1_MEM_SIZE 0x10000000 /* 256M */
371 #define CONFIG_SYS_PCI1_MMIO_BASE 0x90000000
372 #define CONFIG_SYS_PCI1_MMIO_PHYS CONFIG_SYS_PCI1_MMIO_BASE
373 #define CONFIG_SYS_PCI1_MMIO_SIZE 0x10000000 /* 256M */
374 #define CONFIG_SYS_PCI1_IO_BASE 0x00000000
375 #define CONFIG_SYS_PCI1_IO_PHYS 0xE2000000
376 #define CONFIG_SYS_PCI1_IO_SIZE 0x00100000 /* 1M */
378 #define CONFIG_PCI_PNP /* do pci plug-and-play */
379 #define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1057 /* Motorola */
384 #define CONFIG_TSEC_ENET /* TSEC ethernet support */
386 #define CONFIG_GMII /* MII PHY management */
389 #define CONFIG_HAS_ETH0
390 #define CONFIG_TSEC1_NAME "TSEC0"
391 #define CONFIG_SYS_TSEC1_OFFSET 0x24000
392 #define TSEC1_PHY_ADDR 0x1c
393 #define TSEC1_FLAGS TSEC_GIGABIT
394 #define TSEC1_PHYIDX 0
398 #define CONFIG_HAS_ETH1
399 #define CONFIG_TSEC2_NAME "TSEC1"
400 #define CONFIG_SYS_TSEC2_OFFSET 0x25000
401 #define TSEC2_PHY_ADDR 4
402 #define TSEC2_FLAGS TSEC_GIGABIT
403 #define TSEC2_PHYIDX 0
407 /* Options are: TSEC[0-1] */
408 #define CONFIG_ETHPRIME "TSEC1"
411 * Configure on-board RTC
413 #define CONFIG_RTC_DS1337
414 #define CONFIG_SYS_I2C_RTC_ADDR 0x68
419 #if defined(CONFIG_NAND_U_BOOT)
420 #define CONFIG_ENV_IS_IN_NAND 1
421 #define CONFIG_ENV_OFFSET (512 * 1024)
422 #define CONFIG_ENV_SECT_SIZE CONFIG_SYS_NAND_BLOCK_SIZE
423 #define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
424 #define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
425 #define CONFIG_ENV_RANGE (CONFIG_ENV_SECT_SIZE * 4)
426 #define CONFIG_ENV_OFFSET_REDUND \
427 (CONFIG_ENV_OFFSET + CONFIG_ENV_RANGE)
428 #elif !defined(CONFIG_SYS_RAMBOOT)
429 #define CONFIG_ENV_IS_IN_FLASH 1
430 #define CONFIG_ENV_ADDR \
431 (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
432 #define CONFIG_ENV_SECT_SIZE 0x10000 /* 64K(one sector) for env */
433 #define CONFIG_ENV_SIZE 0x2000
435 /* Address and size of Redundant Environment Sector */
437 #define CONFIG_ENV_IS_NOWHERE 1 /* Store ENV in memory only */
438 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000)
439 #define CONFIG_ENV_SIZE 0x2000
442 #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
443 #define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
448 #define CONFIG_BOOTP_BOOTFILESIZE
449 #define CONFIG_BOOTP_BOOTPATH
450 #define CONFIG_BOOTP_GATEWAY
451 #define CONFIG_BOOTP_HOSTNAME
455 * Command line configuration.
457 #include <config_cmd_default.h>
459 #define CONFIG_CMD_PING
460 #define CONFIG_CMD_DHCP
461 #define CONFIG_CMD_I2C
462 #define CONFIG_CMD_MII
463 #define CONFIG_CMD_DATE
464 #define CONFIG_CMD_PCI
466 #if defined(CONFIG_SYS_RAMBOOT) && !defined(CONFIG_NAND_U_BOOT)
467 #undef CONFIG_CMD_SAVEENV
468 #undef CONFIG_CMD_LOADS
471 #define CONFIG_CMDLINE_EDITING 1
472 #define CONFIG_AUTO_COMPLETE /* add autocompletion support */
475 * Miscellaneous configurable options
477 #define CONFIG_SYS_LONGHELP /* undef to save memory */
478 #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */
479 #define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
480 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
482 /* Print Buffer Size */
483 #define CONFIG_SYS_PBSIZE \
484 (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
485 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */
486 /* Boot Argument Buffer Size */
487 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
488 #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */
491 * For booting Linux, the board info and command line data
492 * have to be in the first 256 MB of memory, since this is
493 * the maximum mapped by the Linux kernel during initialization.
495 /* Initial Memory map for Linux*/
496 #define CONFIG_SYS_BOOTMAPSZ (256 << 20)
498 #define CONFIG_SYS_RCWH_PCIHOST 0x80000000 /* PCIHOST */
500 #ifdef CONFIG_SYS_66MHZ
502 /* 66MHz IN, 133MHz CSB, 266 DDR, 266 CORE */
504 #define CONFIG_SYS_HRCW_LOW (\
505 0x20000000 /* reserved, must be set */ |\
507 HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
508 HRCWL_DDR_TO_SCB_CLK_2X1 |\
509 HRCWL_CSB_TO_CLKIN_2X1 |\
510 HRCWL_CORE_TO_CSB_2X1)
512 #define CONFIG_SYS_NS16550_CLK (CONFIG_83XX_CLKIN * 2)
514 #elif defined(CONFIG_SYS_33MHZ)
516 /* 33MHz IN, 165MHz CSB, 330 DDR, 330 CORE */
518 #define CONFIG_SYS_HRCW_LOW (\
519 0x20000000 /* reserved, must be set */ |\
521 HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
522 HRCWL_DDR_TO_SCB_CLK_2X1 |\
523 HRCWL_CSB_TO_CLKIN_5X1 |\
524 HRCWL_CORE_TO_CSB_2X1)
526 #define CONFIG_SYS_NS16550_CLK (CONFIG_83XX_CLKIN * 5)
530 #define CONFIG_SYS_HRCW_HIGH_BASE (\
532 HRCWH_PCI1_ARBITER_ENABLE |\
534 HRCWH_BOOTSEQ_DISABLE |\
535 HRCWH_SW_WATCHDOG_DISABLE |\
536 HRCWH_TSEC1M_IN_RGMII |\
537 HRCWH_TSEC2M_IN_RGMII |\
540 #ifdef CONFIG_NAND_SPL
541 #define CONFIG_SYS_HRCW_HIGH (CONFIG_SYS_HRCW_HIGH_BASE |\
542 HRCWH_FROM_0XFFF00100 |\
543 HRCWH_ROM_LOC_NAND_SP_8BIT |\
546 #define CONFIG_SYS_HRCW_HIGH (CONFIG_SYS_HRCW_HIGH_BASE |\
547 HRCWH_FROM_0X00000100 |\
548 HRCWH_ROM_LOC_LOCAL_16BIT |\
552 /* System IO Config */
553 #define CONFIG_SYS_SICRH (SICRH_TSOBI1 | SICRH_TSOBI2) /* RGMII */
554 #define CONFIG_SYS_SICRL SICRL_USBDR_10 /* Enable Internal USB Phy */
556 #define CONFIG_SYS_HID0_INIT 0x000000000
557 #define CONFIG_SYS_HID0_FINAL (HID0_ENABLE_MACHINE_CHECK | \
558 HID0_ENABLE_INSTRUCTION_CACHE | \
559 HID0_ENABLE_DYNAMIC_POWER_MANAGMENT)
561 #define CONFIG_SYS_HID2 HID2_HBE
563 #define CONFIG_HIGH_BATS 1 /* High BATs supported */
565 /* DDR @ 0x00000000 */
566 #define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_RW)
567 #define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE \
572 /* PCI @ 0x80000000 */
573 #define CONFIG_SYS_IBAT1L (CONFIG_SYS_PCI1_MEM_BASE | BATL_PP_RW)
574 #define CONFIG_SYS_IBAT1U (CONFIG_SYS_PCI1_MEM_BASE \
578 #define CONFIG_SYS_IBAT2L (CONFIG_SYS_PCI1_MMIO_BASE \
580 | BATL_CACHEINHIBIT \
581 | BATL_GUARDEDSTORAGE)
582 #define CONFIG_SYS_IBAT2U (CONFIG_SYS_PCI1_MMIO_BASE \
587 /* PCI2 not supported on 8313 */
588 #define CONFIG_SYS_IBAT3L (0)
589 #define CONFIG_SYS_IBAT3U (0)
590 #define CONFIG_SYS_IBAT4L (0)
591 #define CONFIG_SYS_IBAT4U (0)
593 /* IMMRBAR @ 0xE0000000, PCI IO @ 0xE2000000 & BCSR @ 0xE2400000 */
594 #define CONFIG_SYS_IBAT5L (CONFIG_SYS_IMMR \
596 | BATL_CACHEINHIBIT \
597 | BATL_GUARDEDSTORAGE)
598 #define CONFIG_SYS_IBAT5U (CONFIG_SYS_IMMR \
603 /* SDRAM @ 0xF0000000, stack in DCACHE 0xFDF00000 & FLASH @ 0xFE000000 */
604 #define CONFIG_SYS_IBAT6L (0xF0000000 | BATL_PP_RW | BATL_GUARDEDSTORAGE)
605 #define CONFIG_SYS_IBAT6U (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
607 #define CONFIG_SYS_IBAT7L (0)
608 #define CONFIG_SYS_IBAT7U (0)
610 #define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L
611 #define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U
612 #define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L
613 #define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U
614 #define CONFIG_SYS_DBAT2L CONFIG_SYS_IBAT2L
615 #define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U
616 #define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L
617 #define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U
618 #define CONFIG_SYS_DBAT4L CONFIG_SYS_IBAT4L
619 #define CONFIG_SYS_DBAT4U CONFIG_SYS_IBAT4U
620 #define CONFIG_SYS_DBAT5L CONFIG_SYS_IBAT5L
621 #define CONFIG_SYS_DBAT5U CONFIG_SYS_IBAT5U
622 #define CONFIG_SYS_DBAT6L CONFIG_SYS_IBAT6L
623 #define CONFIG_SYS_DBAT6U CONFIG_SYS_IBAT6U
624 #define CONFIG_SYS_DBAT7L CONFIG_SYS_IBAT7L
625 #define CONFIG_SYS_DBAT7U CONFIG_SYS_IBAT7U
628 * Environment Configuration
630 #define CONFIG_ENV_OVERWRITE
632 #define CONFIG_NETDEV "eth1"
634 #define CONFIG_HOSTNAME mpc8313erdb
635 #define CONFIG_ROOTPATH "/nfs/root/path"
636 #define CONFIG_BOOTFILE "uImage"
637 /* U-Boot image on TFTP server */
638 #define CONFIG_UBOOTPATH "u-boot.bin"
639 #define CONFIG_FDTFILE "mpc8313erdb.dtb"
641 /* default location for tftp and bootm */
642 #define CONFIG_LOADADDR 800000
643 #define CONFIG_BOOTDELAY 6 /* -1 disables auto-boot */
644 #define CONFIG_BAUDRATE 115200
646 #define XMK_STR(x) #x
647 #define MK_STR(x) XMK_STR(x)
649 #define CONFIG_EXTRA_ENV_SETTINGS \
650 "netdev=" CONFIG_NETDEV "\0" \
652 "uboot=" CONFIG_UBOOTPATH "\0" \
653 "tftpflash=tftpboot $loadaddr $uboot; " \
654 "protect off " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; "\
655 "erase " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; " \
656 "cp.b $loadaddr " MK_STR(CONFIG_SYS_TEXT_BASE) " $filesize; "\
657 "protect on " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; "\
658 "cmp.b $loadaddr " MK_STR(CONFIG_SYS_TEXT_BASE) " $filesize\0"\
660 "fdtfile=" CONFIG_FDTFILE "\0" \
662 "setbootargs=setenv bootargs " \
663 "root=$rootdev rw console=$console,$baudrate $othbootargs\0" \
664 "setipargs=setenv bootargs nfsroot=$serverip:$rootpath " \
665 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:"\
667 "root=$rootdev rw console=$console,$baudrate $othbootargs\0"
669 #define CONFIG_NFSBOOTCOMMAND \
670 "setenv rootdev /dev/nfs;" \
673 "tftp $loadaddr $bootfile;" \
674 "tftp $fdtaddr $fdtfile;" \
675 "bootm $loadaddr - $fdtaddr"
677 #define CONFIG_RAMBOOTCOMMAND \
678 "setenv rootdev /dev/ram;" \
680 "tftp $ramdiskaddr $ramdiskfile;" \
681 "tftp $loadaddr $bootfile;" \
682 "tftp $fdtaddr $fdtfile;" \
683 "bootm $loadaddr $ramdiskaddr $fdtaddr"
688 #endif /* __CONFIG_H */