include/configs/MPC8313ERDB.h

   1 /*
   2  * Copyright (C) Freescale Semiconductor, Inc. 2006, 2010.
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6 /*
   7  * mpc8313epb board configuration file
   8  */
   9
  10 #ifndef __CONFIG_H
  11 #define __CONFIG_H
  12
  13 /*
  14  * High Level Configuration Options
  15  */
  16 #define CONFIG_E300             1
  17 #define CONFIG_MPC831x          1
  18 #define CONFIG_MPC8313          1
  19 #define CONFIG_MPC8313ERDB      1
  20
  21 #ifdef CONFIG_NAND
  22 #define CONFIG_SPL_INIT_MINIMAL
  23 #define CONFIG_SPL_FLUSH_IMAGE
  24 #define CONFIG_SPL_TARGET               "u-boot-with-spl.bin"
  25 #define CONFIG_SPL_MPC83XX_WAIT_FOR_NAND
  26
  27 #ifdef CONFIG_SPL_BUILD
  28 #define CONFIG_NS16550_MIN_FUNCTIONS
  29 #endif
  30
  31 #define CONFIG_SYS_TEXT_BASE    0x00100000 /* CONFIG_SYS_NAND_U_BOOT_DST */
  32 #define CONFIG_SYS_TEXT_BASE_SPL 0xfff00000
  33 #define CONFIG_SPL_MAX_SIZE     (4 * 1024)
  34 #define CONFIG_SPL_PAD_TO       0x4000
  35
  36 #define CONFIG_SYS_NAND_U_BOOT_SIZE  (512 << 10)
  37 #define CONFIG_SYS_NAND_U_BOOT_DST   0x00100000
  38 #define CONFIG_SYS_NAND_U_BOOT_START 0x00100100
  39 #define CONFIG_SYS_NAND_U_BOOT_OFFS  16384
  40 #define CONFIG_SYS_NAND_U_BOOT_RELOC 0x00010000
  41 #define CONFIG_SYS_NAND_U_BOOT_RELOC_SP (CONFIG_SYS_NAND_U_BOOT_RELOC + 0x10000)
  42
  43 #ifdef CONFIG_SPL_BUILD
  44 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE_SPL /* start of monitor */
  45 #endif
  46
  47 #endif /* CONFIG_NAND */
  48
  49 #ifndef CONFIG_SYS_TEXT_BASE
  50 #define CONFIG_SYS_TEXT_BASE    0xFE000000
  51 #endif
  52
  53 #ifndef CONFIG_SYS_MONITOR_BASE
  54 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
  55 #endif
  56
  57 #define CONFIG_PCI
  58 #define CONFIG_PCI_INDIRECT_BRIDGE
  59 #define CONFIG_FSL_ELBC 1
  60
  61 #define CONFIG_MISC_INIT_R
  62
  63 /*
  64  * On-board devices
  65  *
  66  * TSEC1 is VSC switch
  67  * TSEC2 is SoC TSEC
  68  */
  69 #define CONFIG_VSC7385_ENET
  70 #define CONFIG_TSEC2
  71
  72 #ifdef CONFIG_SYS_66MHZ
  73 #define CONFIG_83XX_CLKIN       66666667        /* in Hz */
  74 #elif defined(CONFIG_SYS_33MHZ)
  75 #define CONFIG_83XX_CLKIN       33333333        /* in Hz */
  76 #else
  77 #error Unknown oscillator frequency.
  78 #endif
  79
  80 #define CONFIG_SYS_CLK_FREQ     CONFIG_83XX_CLKIN
  81
  82 #define CONFIG_BOARD_EARLY_INIT_F               /* call board_early_init_f */
  83 #define CONFIG_BOARD_EARLY_INIT_R               /* call board_early_init_r */
  84
  85 #define CONFIG_SYS_IMMR         0xE0000000
  86
  87 #if defined(CONFIG_NAND) && !defined(CONFIG_SPL_BUILD)
  88 #define CONFIG_DEFAULT_IMMR     CONFIG_SYS_IMMR
  89 #endif
  90
  91 #define CONFIG_SYS_MEMTEST_START        0x00001000
  92 #define CONFIG_SYS_MEMTEST_END          0x07f00000
  93
  94 /* Early revs of this board will lock up hard when attempting
  95  * to access the PMC registers, unless a JTAG debugger is
  96  * connected, or some resistor modifications are made.
  97  */
  98 #define CONFIG_SYS_8313ERDB_BROKEN_PMC 1
  99
 100 #define CONFIG_SYS_ACR_PIPE_DEP 3       /* Arbiter pipeline depth (0-3) */
 101 #define CONFIG_SYS_ACR_RPTCNT           3       /* Arbiter repeat count (0-7) */
 102
 103 /*
 104  * Device configurations
 105  */
 106
 107 /* Vitesse 7385 */
 108
 109 #ifdef CONFIG_VSC7385_ENET
 110
 111 #define CONFIG_TSEC1
 112
 113 /* The flash address and size of the VSC7385 firmware image */
 114 #define CONFIG_VSC7385_IMAGE            0xFE7FE000
 115 #define CONFIG_VSC7385_IMAGE_SIZE       8192
 116
 117 #endif
 118
 119 /*
 120  * DDR Setup
 121  */
 122 #define CONFIG_SYS_DDR_BASE             0x00000000 /* DDR is system memory*/
 123 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_BASE
 124 #define CONFIG_SYS_DDR_SDRAM_BASE       CONFIG_SYS_DDR_BASE
 125
 126 /*
 127  * Manually set up DDR parameters, as this board does not
 128  * seem to have the SPD connected to I2C.
 129  */
 130 #define CONFIG_SYS_DDR_SIZE     128             /* MB */
 131 #define CONFIG_SYS_DDR_CS0_CONFIG       (CSCONFIG_EN \
 132                                 | CSCONFIG_ODT_RD_NEVER \
 133                                 | CSCONFIG_ODT_WR_ONLY_CURRENT \
 134                                 | CSCONFIG_ROW_BIT_13 \
 135                                 | CSCONFIG_COL_BIT_10)
 136                                 /* 0x80010102 */
 137
 138 #define CONFIG_SYS_DDR_TIMING_3 0x00000000
 139 #define CONFIG_SYS_DDR_TIMING_0 ((0 << TIMING_CFG0_RWT_SHIFT) \
 140                                 | (0 << TIMING_CFG0_WRT_SHIFT) \
 141                                 | (0 << TIMING_CFG0_RRT_SHIFT) \
 142                                 | (0 << TIMING_CFG0_WWT_SHIFT) \
 143                                 | (2 << TIMING_CFG0_ACT_PD_EXIT_SHIFT) \
 144                                 | (2 << TIMING_CFG0_PRE_PD_EXIT_SHIFT) \
 145                                 | (8 << TIMING_CFG0_ODT_PD_EXIT_SHIFT) \
 146                                 | (2 << TIMING_CFG0_MRS_CYC_SHIFT))
 147                                 /* 0x00220802 */
 148 #define CONFIG_SYS_DDR_TIMING_1 ((3 << TIMING_CFG1_PRETOACT_SHIFT) \
 149                                 | (8 << TIMING_CFG1_ACTTOPRE_SHIFT) \
 150                                 | (3 << TIMING_CFG1_ACTTORW_SHIFT) \
 151                                 | (5 << TIMING_CFG1_CASLAT_SHIFT) \
 152                                 | (10 << TIMING_CFG1_REFREC_SHIFT) \
 153                                 | (3 << TIMING_CFG1_WRREC_SHIFT) \
 154                                 | (2 << TIMING_CFG1_ACTTOACT_SHIFT) \
 155                                 | (2 << TIMING_CFG1_WRTORD_SHIFT))
 156                                 /* 0x3835a322 */
 157 #define CONFIG_SYS_DDR_TIMING_2 ((1 << TIMING_CFG2_ADD_LAT_SHIFT) \
 158                                 | (5 << TIMING_CFG2_CPO_SHIFT) \
 159                                 | (2 << TIMING_CFG2_WR_LAT_DELAY_SHIFT) \
 160                                 | (2 << TIMING_CFG2_RD_TO_PRE_SHIFT) \
 161                                 | (2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT) \
 162                                 | (3 << TIMING_CFG2_CKE_PLS_SHIFT) \
 163                                 | (6 << TIMING_CFG2_FOUR_ACT_SHIFT))
 164                                 /* 0x129048c6 */ /* P9-45,may need tuning */
 165 #define CONFIG_SYS_DDR_INTERVAL ((1296 << SDRAM_INTERVAL_REFINT_SHIFT) \
 166                                 | (1280 << SDRAM_INTERVAL_BSTOPRE_SHIFT))
 167                                 /* 0x05100500 */
 168 #if defined(CONFIG_DDR_2T_TIMING)
 169 #define CONFIG_SYS_SDRAM_CFG    (SDRAM_CFG_SREN \
 170                                 | SDRAM_CFG_SDRAM_TYPE_DDR2 \
 171                                 | SDRAM_CFG_DBW_32 \
 172                                 | SDRAM_CFG_2T_EN)
 173                                 /* 0x43088000 */
 174 #else
 175 #define CONFIG_SYS_SDRAM_CFG    (SDRAM_CFG_SREN \
 176                                 | SDRAM_CFG_SDRAM_TYPE_DDR2 \
 177                                 | SDRAM_CFG_DBW_32)
 178                                 /* 0x43080000 */
 179 #endif
 180 #define CONFIG_SYS_SDRAM_CFG2           0x00401000
 181 /* set burst length to 8 for 32-bit data path */
 182 #define CONFIG_SYS_DDR_MODE     ((0x4448 << SDRAM_MODE_ESD_SHIFT) \
 183                                 | (0x0632 << SDRAM_MODE_SD_SHIFT))
 184                                 /* 0x44480632 */
 185 #define CONFIG_SYS_DDR_MODE_2   0x8000C000
 186
 187 #define CONFIG_SYS_DDR_CLK_CNTL DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05
 188                                 /*0x02000000*/
 189 #define CONFIG_SYS_DDRCDR_VALUE (DDRCDR_EN \
 190                                 | DDRCDR_PZ_NOMZ \
 191                                 | DDRCDR_NZ_NOMZ \
 192                                 | DDRCDR_M_ODR)
 193
 194 /*
 195  * FLASH on the Local Bus
 196  */
 197 #define CONFIG_SYS_FLASH_CFI            /* use the Common Flash Interface */
 198 #define CONFIG_FLASH_CFI_DRIVER         /* use the CFI driver */
 199 #define CONFIG_SYS_FLASH_BASE           0xFE000000      /* start of FLASH   */
 200 #define CONFIG_SYS_FLASH_SIZE           8       /* flash size in MB */
 201 #define CONFIG_SYS_FLASH_PROTECTION     1       /* Use h/w Flash protection. */
 202 #define CONFIG_SYS_FLASH_EMPTY_INFO             /* display empty sectors */
 203 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE       /* buffer up multiple bytes */
 204
 205 #define CONFIG_SYS_NOR_BR_PRELIM        (CONFIG_SYS_FLASH_BASE \
 206                                         | BR_PS_16      /* 16 bit port */ \
 207                                         | BR_MS_GPCM    /* MSEL = GPCM */ \
 208                                         | BR_V)         /* valid */
 209 #define CONFIG_SYS_NOR_OR_PRELIM        (MEG_TO_AM(CONFIG_SYS_FLASH_SIZE) \
 210                                 | OR_GPCM_XACS \
 211                                 | OR_GPCM_SCY_9 \
 212                                 | OR_GPCM_EHTR \
 213                                 | OR_GPCM_EAD)
 214                                 /* 0xFF006FF7   TODO SLOW 16 MB flash size */
 215                                         /* window base at flash base */
 216 #define CONFIG_SYS_LBLAWBAR0_PRELIM     CONFIG_SYS_FLASH_BASE
 217                                         /* 16 MB window size */
 218 #define CONFIG_SYS_LBLAWAR0_PRELIM      (LBLAWAR_EN | LBLAWAR_16MB)
 219
 220 #define CONFIG_SYS_MAX_FLASH_BANKS      1       /* number of banks */
 221 #define CONFIG_SYS_MAX_FLASH_SECT       135     /* sectors per device */
 222
 223 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 224 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 225
 226 #if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) && \
 227         !defined(CONFIG_SPL_BUILD)
 228 #define CONFIG_SYS_RAMBOOT
 229 #endif
 230
 231 #define CONFIG_SYS_INIT_RAM_LOCK        1
 232 #define CONFIG_SYS_INIT_RAM_ADDR        0xFD000000      /* Initial RAM addr */
 233 #define CONFIG_SYS_INIT_RAM_SIZE        0x1000  /* Size of used area in RAM*/
 234
 235 #define CONFIG_SYS_GBL_DATA_OFFSET      \
 236                         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 237 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 238
 239 /* CONFIG_SYS_MONITOR_LEN must be a multiple of CONFIG_ENV_SECT_SIZE */
 240 #define CONFIG_SYS_MONITOR_LEN  (512 * 1024)    /* Reserve 512 kB for Mon */
 241 #define CONFIG_SYS_MALLOC_LEN   (512 * 1024)    /* Reserved for malloc */
 242
 243 /*
 244  * Local Bus LCRR and LBCR regs
 245  */
 246 #define CONFIG_SYS_LCRR_EADC    LCRR_EADC_1
 247 #define CONFIG_SYS_LCRR_CLKDIV  LCRR_CLKDIV_4
 248 #define CONFIG_SYS_LBC_LBCR     (0x00040000 /* TODO */ \
 249                                 | (0xFF << LBCR_BMT_SHIFT) \
 250                                 | 0xF)  /* 0x0004ff0f */
 251
 252                                 /* LB refresh timer prescal, 266MHz/32 */
 253 #define CONFIG_SYS_LBC_MRTPR    0x20000000  /*TODO */
 254
 255 /* drivers/mtd/nand/nand.c */
 256 #if defined(CONFIG_NAND) && defined(CONFIG_SPL_BUILD)
 257 #define CONFIG_SYS_NAND_BASE            0xFFF00000
 258 #else
 259 #define CONFIG_SYS_NAND_BASE            0xE2800000
 260 #endif
 261
 262 #define CONFIG_MTD_DEVICE
 263 #define CONFIG_MTD_PARTITION
 264 #define CONFIG_CMD_MTDPARTS
 265 #define MTDIDS_DEFAULT                  "nand0=e2800000.flash"
 266 #define MTDPARTS_DEFAULT                \
 267         "mtdparts=e2800000.flash:512k(uboot),128k(env),6m@1m(kernel),-(fs)"
 268
 269 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 270 #define CONFIG_CMD_NAND 1
 271 #define CONFIG_NAND_FSL_ELBC 1
 272 #define CONFIG_SYS_NAND_BLOCK_SIZE 16384
 273 #define CONFIG_SYS_NAND_WINDOW_SIZE (32 * 1024)
 274
 275 #define CONFIG_SYS_NAND_BR_PRELIM       (CONFIG_SYS_NAND_BASE \
 276                                 | BR_DECC_CHK_GEN       /* Use HW ECC */ \
 277                                 | BR_PS_8               /* 8 bit port */ \
 278                                 | BR_MS_FCM             /* MSEL = FCM */ \
 279                                 | BR_V)                 /* valid */
 280 #define CONFIG_SYS_NAND_OR_PRELIM       \
 281                                 (P2SZ_TO_AM(CONFIG_SYS_NAND_WINDOW_SIZE) \
 282                                 | OR_FCM_CSCT \
 283                                 | OR_FCM_CST \
 284                                 | OR_FCM_CHT \
 285                                 | OR_FCM_SCY_1 \
 286                                 | OR_FCM_TRLX \
 287                                 | OR_FCM_EHTR)
 288                                 /* 0xFFFF8396 */
 289
 290 #ifdef CONFIG_NAND
 291 #define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_NAND_BR_PRELIM
 292 #define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_NAND_OR_PRELIM
 293 #define CONFIG_SYS_BR1_PRELIM CONFIG_SYS_NOR_BR_PRELIM
 294 #define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_NOR_OR_PRELIM
 295 #else
 296 #define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_NOR_BR_PRELIM
 297 #define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_NOR_OR_PRELIM
 298 #define CONFIG_SYS_BR1_PRELIM CONFIG_SYS_NAND_BR_PRELIM
 299 #define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_NAND_OR_PRELIM
 300 #endif
 301
 302 #define CONFIG_SYS_LBLAWBAR1_PRELIM     CONFIG_SYS_NAND_BASE
 303 #define CONFIG_SYS_LBLAWAR1_PRELIM      (LBLAWAR_EN | LBLAWAR_32KB)
 304
 305 #define CONFIG_SYS_NAND_LBLAWBAR_PRELIM CONFIG_SYS_LBLAWBAR1_PRELIM
 306 #define CONFIG_SYS_NAND_LBLAWAR_PRELIM CONFIG_SYS_LBLAWAR1_PRELIM
 307
 308 /* local bus write LED / read status buffer (BCSR) mapping */
 309 #define CONFIG_SYS_BCSR_ADDR            0xFA000000
 310 #define CONFIG_SYS_BCSR_SIZE            (32 * 1024)     /* 0x00008000 */
 311                                         /* map at 0xFA000000 on LCS3 */
 312 #define CONFIG_SYS_BR3_PRELIM           (CONFIG_SYS_BCSR_ADDR \
 313                                         | BR_PS_8       /* 8 bit port */ \
 314                                         | BR_MS_GPCM    /* MSEL = GPCM */ \
 315                                         | BR_V)         /* valid */
 316                                         /* 0xFA000801 */
 317 #define CONFIG_SYS_OR3_PRELIM           (P2SZ_TO_AM(CONFIG_SYS_BCSR_SIZE) \
 318                                         | OR_GPCM_CSNT \
 319                                         | OR_GPCM_ACS_DIV2 \
 320                                         | OR_GPCM_XACS \
 321                                         | OR_GPCM_SCY_15 \
 322                                         | OR_GPCM_TRLX_SET \
 323                                         | OR_GPCM_EHTR_SET \
 324                                         | OR_GPCM_EAD)
 325                                         /* 0xFFFF8FF7 */
 326 #define CONFIG_SYS_LBLAWBAR3_PRELIM     CONFIG_SYS_BCSR_ADDR
 327 #define CONFIG_SYS_LBLAWAR3_PRELIM      (LBLAWAR_EN | LBLAWAR_32KB)
 328
 329 /* Vitesse 7385 */
 330
 331 #ifdef CONFIG_VSC7385_ENET
 332
 333                                         /* VSC7385 Base address on LCS2 */
 334 #define CONFIG_SYS_VSC7385_BASE         0xF0000000
 335 #define CONFIG_SYS_VSC7385_SIZE         (128 * 1024)    /* 0x00020000 */
 336
 337 #define CONFIG_SYS_BR2_PRELIM           (CONFIG_SYS_VSC7385_BASE \
 338                                         | BR_PS_8       /* 8 bit port */ \
 339                                         | BR_MS_GPCM    /* MSEL = GPCM */ \
 340                                         | BR_V)         /* valid */
 341 #define CONFIG_SYS_OR2_PRELIM           (P2SZ_TO_AM(CONFIG_SYS_VSC7385_SIZE) \
 342                                         | OR_GPCM_CSNT \
 343                                         | OR_GPCM_XACS \
 344                                         | OR_GPCM_SCY_15 \
 345                                         | OR_GPCM_SETA \
 346                                         | OR_GPCM_TRLX_SET \
 347                                         | OR_GPCM_EHTR_SET \
 348                                         | OR_GPCM_EAD)
 349                                         /* 0xFFFE09FF */
 350
 351                                         /* Access window base at VSC7385 base */
 352 #define CONFIG_SYS_LBLAWBAR2_PRELIM     CONFIG_SYS_VSC7385_BASE
 353 #define CONFIG_SYS_LBLAWAR2_PRELIM      (LBLAWAR_EN | LBLAWAR_128KB)
 354
 355 #endif
 356
 357 #define CONFIG_MPC83XX_GPIO 1
 358
 359 /*
 360  * Serial Port
 361  */
 362 #define CONFIG_CONS_INDEX       1
 363 #define CONFIG_SYS_NS16550_SERIAL
 364 #define CONFIG_SYS_NS16550_REG_SIZE     1
 365
 366 #define CONFIG_SYS_BAUDRATE_TABLE       \
 367         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}
 368
 369 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR+0x4500)
 370 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR+0x4600)
 371
 372 /* I2C */
 373 #define CONFIG_SYS_I2C
 374 #define CONFIG_SYS_I2C_FSL
 375 #define CONFIG_SYS_FSL_I2C_SPEED        400000
 376 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 377 #define CONFIG_SYS_FSL_I2C_OFFSET       0x3000
 378 #define CONFIG_SYS_FSL_I2C2_SPEED       400000
 379 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
 380 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x3100
 381 #define CONFIG_SYS_I2C_NOPROBES         { {0, 0x69} }
 382
 383 /*
 384  * General PCI
 385  * Addresses are mapped 1-1.
 386  */
 387 #define CONFIG_SYS_PCI1_MEM_BASE        0x80000000
 388 #define CONFIG_SYS_PCI1_MEM_PHYS        CONFIG_SYS_PCI1_MEM_BASE
 389 #define CONFIG_SYS_PCI1_MEM_SIZE        0x10000000      /* 256M */
 390 #define CONFIG_SYS_PCI1_MMIO_BASE       0x90000000
 391 #define CONFIG_SYS_PCI1_MMIO_PHYS       CONFIG_SYS_PCI1_MMIO_BASE
 392 #define CONFIG_SYS_PCI1_MMIO_SIZE       0x10000000      /* 256M */
 393 #define CONFIG_SYS_PCI1_IO_BASE 0x00000000
 394 #define CONFIG_SYS_PCI1_IO_PHYS 0xE2000000
 395 #define CONFIG_SYS_PCI1_IO_SIZE 0x00100000      /* 1M */
 396
 397 #define CONFIG_PCI_PNP          /* do pci plug-and-play */
 398 #define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1057   /* Motorola */
 399
 400 /*
 401  * TSEC
 402  */
 403 #define CONFIG_TSEC_ENET                /* TSEC ethernet support */
 404
 405 #define CONFIG_GMII                     /* MII PHY management */
 406
 407 #ifdef CONFIG_TSEC1
 408 #define CONFIG_HAS_ETH0
 409 #define CONFIG_TSEC1_NAME       "TSEC0"
 410 #define CONFIG_SYS_TSEC1_OFFSET 0x24000
 411 #define TSEC1_PHY_ADDR          0x1c
 412 #define TSEC1_FLAGS             TSEC_GIGABIT
 413 #define TSEC1_PHYIDX            0
 414 #endif
 415
 416 #ifdef CONFIG_TSEC2
 417 #define CONFIG_HAS_ETH1
 418 #define CONFIG_TSEC2_NAME       "TSEC1"
 419 #define CONFIG_SYS_TSEC2_OFFSET 0x25000
 420 #define TSEC2_PHY_ADDR          4
 421 #define TSEC2_FLAGS             TSEC_GIGABIT
 422 #define TSEC2_PHYIDX            0
 423 #endif
 424
 425 /* Options are: TSEC[0-1] */
 426 #define CONFIG_ETHPRIME                 "TSEC1"
 427
 428 /*
 429  * Configure on-board RTC
 430  */
 431 #define CONFIG_RTC_DS1337
 432 #define CONFIG_SYS_I2C_RTC_ADDR         0x68
 433
 434 /*
 435  * Environment
 436  */
 437 #if defined(CONFIG_NAND)
 438         #define CONFIG_ENV_IS_IN_NAND   1
 439         #define CONFIG_ENV_OFFSET               (512 * 1024)
 440         #define CONFIG_ENV_SECT_SIZE    CONFIG_SYS_NAND_BLOCK_SIZE
 441         #define CONFIG_ENV_SIZE         CONFIG_ENV_SECT_SIZE
 442         #define CONFIG_ENV_SIZE_REDUND  CONFIG_ENV_SIZE
 443         #define CONFIG_ENV_RANGE                (CONFIG_ENV_SECT_SIZE * 4)
 444         #define CONFIG_ENV_OFFSET_REDUND        \
 445                                         (CONFIG_ENV_OFFSET + CONFIG_ENV_RANGE)
 446 #elif !defined(CONFIG_SYS_RAMBOOT)
 447         #define CONFIG_ENV_IS_IN_FLASH  1
 448         #define CONFIG_ENV_ADDR         \
 449                         (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
 450         #define CONFIG_ENV_SECT_SIZE    0x10000 /* 64K(one sector) for env */
 451         #define CONFIG_ENV_SIZE         0x2000
 452
 453 /* Address and size of Redundant Environment Sector */
 454 #else
 455         #define CONFIG_ENV_IS_NOWHERE   1       /* Store ENV in memory only */
 456         #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - 0x1000)
 457         #define CONFIG_ENV_SIZE         0x2000
 458 #endif
 459
 460 #define CONFIG_LOADS_ECHO       1       /* echo on for serial download */
 461 #define CONFIG_SYS_LOADS_BAUD_CHANGE    1       /* allow baudrate change */
 462
 463 /*
 464  * BOOTP options
 465  */
 466 #define CONFIG_BOOTP_BOOTFILESIZE
 467 #define CONFIG_BOOTP_BOOTPATH
 468 #define CONFIG_BOOTP_GATEWAY
 469 #define CONFIG_BOOTP_HOSTNAME
 470
 471 /*
 472  * Command line configuration.
 473  */
 474 #define CONFIG_CMD_DATE
 475 #define CONFIG_CMD_PCI
 476
 477 #define CONFIG_CMDLINE_EDITING 1
 478 #define CONFIG_AUTO_COMPLETE    /* add autocompletion support   */
 479
 480 /*
 481  * Miscellaneous configurable options
 482  */
 483 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 484 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 485 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size */
 486
 487                                                 /* Print Buffer Size */
 488 #define CONFIG_SYS_PBSIZE       \
 489                         (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 490 #define CONFIG_SYS_MAXARGS      16      /* max number of command args */
 491                                 /* Boot Argument Buffer Size */
 492 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE
 493
 494 /*
 495  * For booting Linux, the board info and command line data
 496  * have to be in the first 256 MB of memory, since this is
 497  * the maximum mapped by the Linux kernel during initialization.
 498  */
 499                                 /* Initial Memory map for Linux*/
 500 #define CONFIG_SYS_BOOTMAPSZ    (256 << 20)
 501 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 502
 503 #define CONFIG_SYS_RCWH_PCIHOST 0x80000000      /* PCIHOST  */
 504
 505 #ifdef CONFIG_SYS_66MHZ
 506
 507 /* 66MHz IN, 133MHz CSB, 266 DDR, 266 CORE */
 508 /* 0x62040000 */
 509 #define CONFIG_SYS_HRCW_LOW (\
 510         0x20000000 /* reserved, must be set */ |\
 511         HRCWL_DDRCM |\
 512         HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
 513         HRCWL_DDR_TO_SCB_CLK_2X1 |\
 514         HRCWL_CSB_TO_CLKIN_2X1 |\
 515         HRCWL_CORE_TO_CSB_2X1)
 516
 517 #define CONFIG_SYS_NS16550_CLK (CONFIG_83XX_CLKIN * 2)
 518
 519 #elif defined(CONFIG_SYS_33MHZ)
 520
 521 /* 33MHz IN, 165MHz CSB, 330 DDR, 330 CORE */
 522 /* 0x65040000 */
 523 #define CONFIG_SYS_HRCW_LOW (\
 524         0x20000000 /* reserved, must be set */ |\
 525         HRCWL_DDRCM |\
 526         HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
 527         HRCWL_DDR_TO_SCB_CLK_2X1 |\
 528         HRCWL_CSB_TO_CLKIN_5X1 |\
 529         HRCWL_CORE_TO_CSB_2X1)
 530
 531 #define CONFIG_SYS_NS16550_CLK (CONFIG_83XX_CLKIN * 5)
 532
 533 #endif
 534
 535 #define CONFIG_SYS_HRCW_HIGH_BASE (\
 536         HRCWH_PCI_HOST |\
 537         HRCWH_PCI1_ARBITER_ENABLE |\
 538         HRCWH_CORE_ENABLE |\
 539         HRCWH_BOOTSEQ_DISABLE |\
 540         HRCWH_SW_WATCHDOG_DISABLE |\
 541         HRCWH_TSEC1M_IN_RGMII |\
 542         HRCWH_TSEC2M_IN_RGMII |\
 543         HRCWH_BIG_ENDIAN)
 544
 545 #ifdef CONFIG_NAND
 546 #define CONFIG_SYS_HRCW_HIGH (CONFIG_SYS_HRCW_HIGH_BASE |\
 547                        HRCWH_FROM_0XFFF00100 |\
 548                        HRCWH_ROM_LOC_NAND_SP_8BIT |\
 549                        HRCWH_RL_EXT_NAND)
 550 #else
 551 #define CONFIG_SYS_HRCW_HIGH (CONFIG_SYS_HRCW_HIGH_BASE |\
 552                        HRCWH_FROM_0X00000100 |\
 553                        HRCWH_ROM_LOC_LOCAL_16BIT |\
 554                        HRCWH_RL_EXT_LEGACY)
 555 #endif
 556
 557 /* System IO Config */
 558 #define CONFIG_SYS_SICRH        (SICRH_TSOBI1 | SICRH_TSOBI2)   /* RGMII */
 559                         /* Enable Internal USB Phy and GPIO on LCD Connector */
 560 #define CONFIG_SYS_SICRL        (SICRL_USBDR_10 | SICRL_LBC)
 561
 562 #define CONFIG_SYS_HID0_INIT    0x000000000
 563 #define CONFIG_SYS_HID0_FINAL   (HID0_ENABLE_MACHINE_CHECK | \
 564                                  HID0_ENABLE_INSTRUCTION_CACHE | \
 565                                  HID0_ENABLE_DYNAMIC_POWER_MANAGMENT)
 566
 567 #define CONFIG_SYS_HID2 HID2_HBE
 568
 569 #define CONFIG_HIGH_BATS        1       /* High BATs supported */
 570
 571 /* DDR @ 0x00000000 */
 572 #define CONFIG_SYS_IBAT0L       (CONFIG_SYS_SDRAM_BASE | BATL_PP_RW)
 573 #define CONFIG_SYS_IBAT0U       (CONFIG_SYS_SDRAM_BASE \
 574                                 | BATU_BL_256M \
 575                                 | BATU_VS \
 576                                 | BATU_VP)
 577
 578 /* PCI @ 0x80000000 */
 579 #define CONFIG_SYS_IBAT1L       (CONFIG_SYS_PCI1_MEM_BASE | BATL_PP_RW)
 580 #define CONFIG_SYS_IBAT1U       (CONFIG_SYS_PCI1_MEM_BASE \
 581                                 | BATU_BL_256M \
 582                                 | BATU_VS \
 583                                 | BATU_VP)
 584 #define CONFIG_SYS_IBAT2L       (CONFIG_SYS_PCI1_MMIO_BASE \
 585                                 | BATL_PP_RW \
 586                                 | BATL_CACHEINHIBIT \
 587                                 | BATL_GUARDEDSTORAGE)
 588 #define CONFIG_SYS_IBAT2U       (CONFIG_SYS_PCI1_MMIO_BASE \
 589                                 | BATU_BL_256M \
 590                                 | BATU_VS \
 591                                 | BATU_VP)
 592
 593 /* PCI2 not supported on 8313 */
 594 #define CONFIG_SYS_IBAT3L       (0)
 595 #define CONFIG_SYS_IBAT3U       (0)
 596 #define CONFIG_SYS_IBAT4L       (0)
 597 #define CONFIG_SYS_IBAT4U       (0)
 598
 599 /* IMMRBAR @ 0xE0000000, PCI IO @ 0xE2000000 & BCSR @ 0xE2400000 */
 600 #define CONFIG_SYS_IBAT5L       (CONFIG_SYS_IMMR \
 601                                 | BATL_PP_RW \
 602                                 | BATL_CACHEINHIBIT \
 603                                 | BATL_GUARDEDSTORAGE)
 604 #define CONFIG_SYS_IBAT5U       (CONFIG_SYS_IMMR \
 605                                 | BATU_BL_256M \
 606                                 | BATU_VS \
 607                                 | BATU_VP)
 608
 609 /* SDRAM @ 0xF0000000, stack in DCACHE 0xFDF00000 & FLASH @ 0xFE000000 */
 610 #define CONFIG_SYS_IBAT6L       (0xF0000000 | BATL_PP_RW | BATL_GUARDEDSTORAGE)
 611 #define CONFIG_SYS_IBAT6U       (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
 612
 613 #define CONFIG_SYS_IBAT7L       (0)
 614 #define CONFIG_SYS_IBAT7U       (0)
 615
 616 #define CONFIG_SYS_DBAT0L       CONFIG_SYS_IBAT0L
 617 #define CONFIG_SYS_DBAT0U       CONFIG_SYS_IBAT0U
 618 #define CONFIG_SYS_DBAT1L       CONFIG_SYS_IBAT1L
 619 #define CONFIG_SYS_DBAT1U       CONFIG_SYS_IBAT1U
 620 #define CONFIG_SYS_DBAT2L       CONFIG_SYS_IBAT2L
 621 #define CONFIG_SYS_DBAT2U       CONFIG_SYS_IBAT2U
 622 #define CONFIG_SYS_DBAT3L       CONFIG_SYS_IBAT3L
 623 #define CONFIG_SYS_DBAT3U       CONFIG_SYS_IBAT3U
 624 #define CONFIG_SYS_DBAT4L       CONFIG_SYS_IBAT4L
 625 #define CONFIG_SYS_DBAT4U       CONFIG_SYS_IBAT4U
 626 #define CONFIG_SYS_DBAT5L       CONFIG_SYS_IBAT5L
 627 #define CONFIG_SYS_DBAT5U       CONFIG_SYS_IBAT5U
 628 #define CONFIG_SYS_DBAT6L       CONFIG_SYS_IBAT6L
 629 #define CONFIG_SYS_DBAT6U       CONFIG_SYS_IBAT6U
 630 #define CONFIG_SYS_DBAT7L       CONFIG_SYS_IBAT7L
 631 #define CONFIG_SYS_DBAT7U       CONFIG_SYS_IBAT7U
 632
 633 /*
 634  * Environment Configuration
 635  */
 636 #define CONFIG_ENV_OVERWRITE
 637
 638 #define CONFIG_NETDEV           "eth1"
 639
 640 #define CONFIG_HOSTNAME         mpc8313erdb
 641 #define CONFIG_ROOTPATH         "/nfs/root/path"
 642 #define CONFIG_BOOTFILE         "uImage"
 643                                 /* U-Boot image on TFTP server */
 644 #define CONFIG_UBOOTPATH        "u-boot.bin"
 645 #define CONFIG_FDTFILE          "mpc8313erdb.dtb"
 646
 647                                 /* default location for tftp and bootm */
 648 #define CONFIG_LOADADDR         800000
 649 #define CONFIG_BAUDRATE         115200
 650
 651 #define CONFIG_EXTRA_ENV_SETTINGS \
 652         "netdev=" CONFIG_NETDEV "\0"                                    \
 653         "ethprime=TSEC1\0"                                              \
 654         "uboot=" CONFIG_UBOOTPATH "\0"                                  \
 655         "tftpflash=tftpboot $loadaddr $uboot; "                         \
 656                 "protect off " __stringify(CONFIG_SYS_TEXT_BASE)        \
 657                         " +$filesize; " \
 658                 "erase " __stringify(CONFIG_SYS_TEXT_BASE)              \
 659                         " +$filesize; " \
 660                 "cp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE)     \
 661                         " $filesize; "  \
 662                 "protect on " __stringify(CONFIG_SYS_TEXT_BASE)         \
 663                         " +$filesize; " \
 664                 "cmp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE)    \
 665                         " $filesize\0"  \
 666         "fdtaddr=780000\0"                                              \
 667         "fdtfile=" CONFIG_FDTFILE "\0"                                  \
 668         "console=ttyS0\0"                                               \
 669         "setbootargs=setenv bootargs "                                  \
 670                 "root=$rootdev rw console=$console,$baudrate $othbootargs\0" \
 671         "setipargs=setenv bootargs nfsroot=$serverip:$rootpath "         \
 672                 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:"\
 673                                                         "$netdev:off " \
 674                 "root=$rootdev rw console=$console,$baudrate $othbootargs\0"
 675
 676 #define CONFIG_NFSBOOTCOMMAND                                           \
 677         "setenv rootdev /dev/nfs;"                                      \
 678         "run setbootargs;"                                              \
 679         "run setipargs;"                                                \
 680         "tftp $loadaddr $bootfile;"                                     \
 681         "tftp $fdtaddr $fdtfile;"                                       \
 682         "bootm $loadaddr - $fdtaddr"
 683
 684 #define CONFIG_RAMBOOTCOMMAND                                           \
 685         "setenv rootdev /dev/ram;"                                      \
 686         "run setbootargs;"                                              \
 687         "tftp $ramdiskaddr $ramdiskfile;"                               \
 688         "tftp $loadaddr $bootfile;"                                     \
 689         "tftp $fdtaddr $fdtfile;"                                       \
 690         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 691
 692 #endif  /* __CONFIG_H */