2 * Configuation settings for the Freescale MCF54455 EVB board.
4 * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
5 * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
7 * See file CREDITS for list of people who contributed to this
10 * This program is free software; you can redistribute it and/or
11 * modify it under the terms of the GNU General Public License as
12 * published by the Free Software Foundation; either version 2 of
13 * the License, or (at your option) any later version.
15 * This program is distributed in the hope that it will be useful,
16 * but WITHOUT ANY WARRANTY; without even the implied warranty of
17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
18 * GNU General Public License for more details.
20 * You should have received a copy of the GNU General Public License
21 * along with this program; if not, write to the Free Software
22 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
27 * board/config.h - configuration options, board specific
34 * High Level Configuration Options
37 #define CONFIG_MCF5445x /* define processor family */
38 #define CONFIG_M54455 /* define processor type */
39 #define CONFIG_M54455EVB /* M54455EVB board */
41 #define CONFIG_MCFUART
42 #define CFG_UART_PORT (0)
43 #define CONFIG_BAUDRATE 115200
44 #define CFG_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 }
46 #undef CONFIG_WATCHDOG
48 #define CONFIG_TIMESTAMP /* Print image info with timestamp */
53 #define CONFIG_BOOTP_BOOTFILESIZE
54 #define CONFIG_BOOTP_BOOTPATH
55 #define CONFIG_BOOTP_GATEWAY
56 #define CONFIG_BOOTP_HOSTNAME
58 /* Command line configuration */
59 #include <config_cmd_default.h>
61 #define CONFIG_CMD_BOOTD
62 #define CONFIG_CMD_CACHE
63 #define CONFIG_CMD_DATE
64 #define CONFIG_CMD_DHCP
65 #define CONFIG_CMD_ELF
66 #define CONFIG_CMD_EXT2
67 #define CONFIG_CMD_FAT
68 #define CONFIG_CMD_FLASH
69 #define CONFIG_CMD_I2C
70 #define CONFIG_CMD_IDE
71 #define CONFIG_CMD_JFFS2
72 #define CONFIG_CMD_MEMORY
73 #define CONFIG_CMD_MISC
74 #define CONFIG_CMD_MII
75 #define CONFIG_CMD_NET
77 #define CONFIG_CMD_PING
78 #define CONFIG_CMD_REGINFO
79 #define CONFIG_CMD_SPI
81 #undef CONFIG_CMD_LOADB
82 #undef CONFIG_CMD_LOADS
84 /* Network configuration */
87 # define CONFIG_NET_MULTI 1
89 # define CONFIG_MII_INIT 1
90 # define CFG_DISCOVER_PHY
91 # define CFG_RX_ETH_BUFFER 8
92 # define CFG_FAULT_ECHO_LINK_DOWN
94 # define CFG_FEC0_PINMUX 0
95 # define CFG_FEC1_PINMUX 0
96 # define CFG_FEC0_MIIBASE CFG_FEC0_IOBASE
97 # define CFG_FEC1_MIIBASE CFG_FEC0_IOBASE
98 # define MCFFEC_TOUT_LOOP 50000
99 # define CONFIG_HAS_ETH1
101 # define CONFIG_BOOTDELAY 1 /* autoboot after 5 seconds */
102 # define CONFIG_BOOTARGS "root=/dev/mtdblock1 rw rootfstype=jffs2 ip=none mtdparts=physmap-flash.0:5M(kernel)ro,-(jffs2)"
103 # define CONFIG_ETHADDR 00:e0:0c:bc:e5:60
104 # define CONFIG_ETH1ADDR 00:e0:0c:bc:e5:61
105 # define CONFIG_ETHPRIME "FEC0"
106 # define CONFIG_IPADDR 192.162.1.2
107 # define CONFIG_NETMASK 255.255.255.0
108 # define CONFIG_SERVERIP 192.162.1.1
109 # define CONFIG_GATEWAYIP 192.162.1.1
110 # define CONFIG_OVERWRITE_ETHADDR_ONCE
112 /* If CFG_DISCOVER_PHY is not defined - hardcoded */
113 # ifndef CFG_DISCOVER_PHY
114 # define FECDUPLEX FULL
115 # define FECSPEED _100BASET
117 # ifndef CFG_FAULT_ECHO_LINK_DOWN
118 # define CFG_FAULT_ECHO_LINK_DOWN
120 # endif /* CFG_DISCOVER_PHY */
123 #define CONFIG_HOSTNAME M54455EVB
124 #ifdef CFG_STMICRO_BOOT
125 /* ST Micro serial flash */
126 #define CFG_LOAD_ADDR2 0x40010013
127 #define CONFIG_EXTRA_ENV_SETTINGS \
129 "inpclk=" MK_STR(CFG_INPUT_CLKSRC) "\0" \
130 "loadaddr=0x40010000\0" \
131 "sbfhdr=sbfhdr.bin\0" \
132 "uboot=u-boot.bin\0" \
133 "load=tftp ${loadaddr} ${sbfhdr};" \
134 "tftp " MK_STR(CFG_LOAD_ADDR2) " ${uboot} \0" \
135 "upd=run load; run prog\0" \
136 "prog=sf probe 0:1 10000 1;" \
137 "sf erase 0 30000;" \
138 "sf write ${loadaddr} 0 0x30000;" \
142 /* Atmel and Intel */
143 #ifdef CFG_ATMEL_BOOT
144 # define CFG_UBOOT_END 0x0403FFFF
145 #elif defined(CFG_INTEL_BOOT)
146 # define CFG_UBOOT_END 0x3FFFF
148 #define CONFIG_EXTRA_ENV_SETTINGS \
150 "inpclk=" MK_STR(CFG_INPUT_CLKSRC) "\0" \
151 "loadaddr=0x40010000\0" \
152 "uboot=u-boot.bin\0" \
153 "load=tftp ${loadaddr} ${uboot}\0" \
154 "upd=run load; run prog\0" \
155 "prog=prot off " MK_STR(CFG_FLASH_BASE) \
156 " " MK_STR(CFG_UBOOT_END) ";" \
157 "era " MK_STR(CFG_FLASH_BASE) " " \
158 MK_STR(CFG_UBOOT_END) ";" \
159 "cp.b ${loadaddr} " MK_STR(CFG_FLASH_BASE)\
160 " ${filesize}; save\0" \
164 /* ATA configuration */
165 #define CONFIG_ISO_PARTITION
166 #define CONFIG_DOS_PARTITION
167 #define CONFIG_IDE_RESET 1
168 #define CONFIG_IDE_PREINIT 1
172 #define CFG_IDE_MAXBUS 1
173 #define CFG_IDE_MAXDEVICE 2
175 #define CFG_ATA_BASE_ADDR 0x90000000
176 #define CFG_ATA_IDE0_OFFSET 0
178 #define CFG_ATA_DATA_OFFSET 0xA0 /* Offset for data I/O */
179 #define CFG_ATA_REG_OFFSET 0xA0 /* Offset for normal register accesses */
180 #define CFG_ATA_ALT_OFFSET 0xC0 /* Offset for alternate registers */
181 #define CFG_ATA_STRIDE 4 /* Interval between registers */
185 #define CONFIG_MCFRTC
187 #define CFG_RTC_OSCILLATOR (32 * CFG_HZ)
190 #define CONFIG_MCFTMR
194 #define CONFIG_FSL_I2C
195 #define CONFIG_HARD_I2C /* I2C with hardware support */
196 #undef CONFIG_SOFT_I2C /* I2C bit-banged */
197 #define CFG_I2C_SPEED 80000 /* I2C speed and slave address */
198 #define CFG_I2C_SLAVE 0x7F
199 #define CFG_I2C_OFFSET 0x58000
200 #define CFG_IMMR CFG_MBAR
202 /* DSPI and Serial Flash */
203 #define CONFIG_CF_DSPI
204 #define CONFIG_HARD_SPI
205 #define CFG_SER_FLASH_BASE 0x01000000
206 #define CFG_SBFHDR_SIZE 0x13
207 #ifdef CONFIG_CMD_SPI
208 # define CFG_DSPI_DCTAR0 (DSPI_DCTAR_TRSZ(7) | \
211 DSPI_DCTAR_PCSSCK_1CLK | \
212 DSPI_DCTAR_PASC(0) | \
213 DSPI_DCTAR_PDT(0) | \
214 DSPI_DCTAR_CSSCK(0) | \
215 DSPI_DCTAR_ASC(0) | \
216 DSPI_DCTAR_PBR(0) | \
222 #ifdef CONFIG_CMD_PCI
224 #define CONFIG_PCI_PNP 1
225 #define CONFIG_PCIAUTO_SKIP_HOST_BRIDGE 1
227 #define CFG_PCI_CACHE_LINE_SIZE 4
229 #define CFG_PCI_MEM_BUS 0xA0000000
230 #define CFG_PCI_MEM_PHYS CFG_PCI_MEM_BUS
231 #define CFG_PCI_MEM_SIZE 0x10000000
233 #define CFG_PCI_IO_BUS 0xB1000000
234 #define CFG_PCI_IO_PHYS CFG_PCI_IO_BUS
235 #define CFG_PCI_IO_SIZE 0x01000000
237 #define CFG_PCI_CFG_BUS 0xB0000000
238 #define CFG_PCI_CFG_PHYS CFG_PCI_CFG_BUS
239 #define CFG_PCI_CFG_SIZE 0x01000000
242 /* FPGA - Spartan 2 */
244 #define CONFIG_FPGA CFG_SPARTAN3
245 #define CONFIG_FPGA_COUNT 1
246 #define CFG_FPGA_PROG_FEEDBACK
247 #define CFG_FPGA_CHECK_CTRLC
250 /* Input, PCI, Flexbus, and VCO */
251 #define CONFIG_EXTRA_CLOCK
253 #define CONFIG_PRAM 2048 /* 2048 KB */
255 #define CFG_PROMPT "-> "
256 #define CFG_LONGHELP /* undef to save memory */
258 #if defined(CONFIG_CMD_KGDB)
259 #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
261 #define CFG_CBSIZE 256 /* Console I/O Buffer Size */
263 #define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
264 #define CFG_MAXARGS 16 /* max number of command args */
265 #define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
267 #define CFG_LOAD_ADDR (CFG_SDRAM_BASE + 0x10000)
271 #define CFG_MBAR 0xFC000000
274 * Low Level Configuration Settings
275 * (address mappings, register initial values, etc.)
276 * You should know what you are doing if you make changes here.
279 /*-----------------------------------------------------------------------
280 * Definitions for initial stack pointer and data area (in DPRAM)
282 #define CFG_INIT_RAM_ADDR 0x80000000
283 #define CFG_INIT_RAM_END 0x8000 /* End of used area in internal SRAM */
284 #define CFG_INIT_RAM_CTRL 0x221
285 #define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
286 #define CFG_GBL_DATA_OFFSET ((CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) - 32)
287 #define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
288 #define CFG_SBFHDR_DATA_OFFSET (CFG_INIT_RAM_END - 32)
290 /*-----------------------------------------------------------------------
291 * Start addresses for the final memory configuration
292 * (Set up by the startup code)
293 * Please note that CFG_SDRAM_BASE _must_ start at 0
295 #define CFG_SDRAM_BASE 0x40000000
296 #define CFG_SDRAM_BASE1 0x48000000
297 #define CFG_SDRAM_SIZE 256 /* SDRAM size in MB */
298 #define CFG_SDRAM_CFG1 0x65311610
299 #define CFG_SDRAM_CFG2 0x59670000
300 #define CFG_SDRAM_CTRL 0xEA0B2000
301 #define CFG_SDRAM_EMOD 0x40010000
302 #define CFG_SDRAM_MODE 0x00010033
303 #define CFG_SDRAM_DRV_STRENGTH 0xAA
305 #define CFG_MEMTEST_START CFG_SDRAM_BASE + 0x400
306 #define CFG_MEMTEST_END ((CFG_SDRAM_SIZE - 3) << 20)
309 # define CFG_MONITOR_BASE (TEXT_BASE + 0x400)
311 # define CFG_MONITOR_BASE (CFG_FLASH_BASE + 0x400)
313 #define CFG_BOOTPARAMS_LEN 64*1024
314 #define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
315 #define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
318 * For booting Linux, the board info and command line data
319 * have to be in the first 8 MB of memory, since this is
320 * the maximum mapped by the Linux kernel during initialization ??
322 /* Initial Memory map for Linux */
323 #define CFG_BOOTMAPSZ (CFG_SDRAM_BASE + (CFG_SDRAM_SIZE << 20))
326 * Configuration for environment
327 * Environment is embedded in u-boot in the second sector of the flash
330 # define CFG_ENV_IS_IN_SPI_FLASH
331 # define CFG_ENV_SPI_CS 1
333 # define CFG_ENV_IS_IN_FLASH 1
335 #undef CONFIG_ENV_OVERWRITE
336 #undef CFG_ENV_IS_EMBEDDED
338 /*-----------------------------------------------------------------------
341 #ifdef CFG_STMICRO_BOOT
342 # define CFG_FLASH_BASE CFG_SER_FLASH_BASE
343 # define CFG_FLASH0_BASE CFG_SER_FLASH_BASE
344 # define CFG_FLASH1_BASE CFG_CS0_BASE
345 # define CFG_FLASH2_BASE CFG_CS1_BASE
346 # define CFG_ENV_OFFSET 0x30000
347 # define CFG_ENV_SIZE 0x2000
348 # define CFG_ENV_SECT_SIZE 0x10000
350 #ifdef CFG_ATMEL_BOOT
351 # define CFG_FLASH_BASE CFG_CS0_BASE
352 # define CFG_FLASH0_BASE CFG_CS0_BASE
353 # define CFG_FLASH1_BASE CFG_CS1_BASE
354 # define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x4000)
355 # define CFG_ENV_SECT_SIZE 0x2000
357 #ifdef CFG_INTEL_BOOT
358 # define CFG_FLASH_BASE CFG_CS0_BASE
359 # define CFG_FLASH0_BASE CFG_CS0_BASE
360 # define CFG_FLASH1_BASE CFG_CS1_BASE
361 # define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x40000)
362 # define CFG_ENV_SIZE 0x2000
363 # define CFG_ENV_SECT_SIZE 0x20000
366 #define CFG_FLASH_CFI
369 # define CONFIG_FLASH_CFI_DRIVER 1
370 # define CFG_FLASH_SIZE 0x1000000 /* Max size that the board might have */
371 # define CFG_FLASH_CFI_WIDTH FLASH_CFI_8BIT
372 # define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */
373 # define CFG_MAX_FLASH_SECT 137 /* max number of sectors on one chip */
374 # define CFG_FLASH_PROTECTION /* "Real" (hardware) sectors protection */
375 # define CFG_FLASH_CHECKSUM
376 # define CFG_FLASH_BANKS_LIST { CFG_CS0_BASE, CFG_CS1_BASE }
377 # define CONFIG_FLASH_CFI_LEGACY
379 #ifdef CONFIG_FLASH_CFI_LEGACY
380 # define CFG_ATMEL_REGION 4
381 # define CFG_ATMEL_TOTALSECT 11
382 # define CFG_ATMEL_SECT {1, 2, 1, 7}
383 # define CFG_ATMEL_SECTSZ {0x4000, 0x2000, 0x8000, 0x10000}
387 #define CFG_FLASH_PROTECTION /* "Real" (hardware) sectors protection */
388 #define CFG_FLASH_CHECKSUM
391 * This is setting for JFFS2 support in u-boot.
392 * NOTE: Enable CONFIG_CMD_JFFS2 for JFFS2 support.
394 #ifdef CONFIG_CMD_JFFS2
395 #ifdef CF_STMICRO_BOOT
396 # define CONFIG_JFFS2_DEV "nor1"
397 # define CONFIG_JFFS2_PART_SIZE 0x01000000
398 # define CONFIG_JFFS2_PART_OFFSET (CFG_FLASH2_BASE + 0x500000)
400 #ifdef CFG_ATMEL_BOOT
401 # define CONFIG_JFFS2_DEV "nor1"
402 # define CONFIG_JFFS2_PART_SIZE 0x01000000
403 # define CONFIG_JFFS2_PART_OFFSET (CFG_FLASH1_BASE + 0x500000)
405 #ifdef CFG_INTEL_BOOT
406 # define CONFIG_JFFS2_DEV "nor0"
407 # define CONFIG_JFFS2_PART_SIZE (0x01000000 - 0x500000)
408 # define CONFIG_JFFS2_PART_OFFSET (CFG_FLASH0_BASE + 0x500000)
412 /*-----------------------------------------------------------------------
413 * Cache Configuration
415 #define CFG_CACHELINE_SIZE 16
417 /*-----------------------------------------------------------------------
418 * Memory bank definitions
421 * CS0 - NOR Flash 1, 2, 4, or 8MB
422 * CS1 - CompactFlash and registers
429 #if defined(CFG_ATMEL_BOOT) || defined(CFG_STMICRO_BOOT)
431 #define CFG_CS0_BASE 0x04000000
432 #define CFG_CS0_MASK 0x00070001
433 #define CFG_CS0_CTRL 0x00001140
435 #define CFG_CS1_BASE 0x00000000
436 #define CFG_CS1_MASK 0x01FF0001
437 #define CFG_CS1_CTRL 0x00000D60
439 #define CFG_ATMEL_BASE CFG_CS0_BASE
442 #define CFG_CS0_BASE 0x00000000
443 #define CFG_CS0_MASK 0x01FF0001
444 #define CFG_CS0_CTRL 0x00000D60
446 #define CFG_CS1_BASE 0x04000000
447 #define CFG_CS1_MASK 0x00070001
448 #define CFG_CS1_CTRL 0x00001140
450 #define CFG_ATMEL_BASE CFG_CS1_BASE
454 #define CFG_CS2_BASE 0x08000000
455 #define CFG_CS2_MASK 0x00070001
456 #define CFG_CS2_CTRL 0x003f1140
459 #define CFG_CS3_BASE 0x09000000
460 #define CFG_CS3_MASK 0x00070001
461 #define CFG_CS3_CTRL 0x00000020
463 #endif /* _M54455EVB_H */