include/configs/M54455EVB.h

   1 /*
   2  * Configuation settings for the Freescale MCF54455 EVB board.
   3  *
   4  * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
   5  * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
   6  *
   7  * SPDX-License-Identifier:     GPL-2.0+
   8  */
   9
  10 /*
  11  * board/config.h - configuration options, board specific
  12  */
  13
  14 #ifndef _M54455EVB_H
  15 #define _M54455EVB_H
  16
  17 /*
  18  * High Level Configuration Options
  19  * (easy to change)
  20  */
  21 #define CONFIG_M54455EVB        /* M54455EVB board */
  22
  23 #define CONFIG_MCFUART
  24 #define CONFIG_SYS_UART_PORT            (0)
  25
  26 #define LDS_BOARD_TEXT                  board/freescale/m54455evb/sbf_dram_init.o (.text*)
  27
  28 #undef CONFIG_WATCHDOG
  29
  30 #define CONFIG_TIMESTAMP        /* Print image info with timestamp */
  31
  32 /*
  33  * BOOTP options
  34  */
  35 #define CONFIG_BOOTP_BOOTFILESIZE
  36 #define CONFIG_BOOTP_BOOTPATH
  37 #define CONFIG_BOOTP_GATEWAY
  38 #define CONFIG_BOOTP_HOSTNAME
  39
  40 /* Network configuration */
  41 #define CONFIG_MCFFEC
  42 #ifdef CONFIG_MCFFEC
  43 #       define CONFIG_MII               1
  44 #       define CONFIG_MII_INIT          1
  45 #       define CONFIG_SYS_DISCOVER_PHY
  46 #       define CONFIG_SYS_RX_ETH_BUFFER 8
  47 #       define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
  48
  49 #       define CONFIG_SYS_FEC0_PINMUX   0
  50 #       define CONFIG_SYS_FEC1_PINMUX   0
  51 #       define CONFIG_SYS_FEC0_MIIBASE  CONFIG_SYS_FEC0_IOBASE
  52 #       define CONFIG_SYS_FEC1_MIIBASE  CONFIG_SYS_FEC0_IOBASE
  53 #       define MCFFEC_TOUT_LOOP 50000
  54 #       define CONFIG_HAS_ETH1
  55
  56 #       define CONFIG_ETHPRIME          "FEC0"
  57 #       define CONFIG_IPADDR            192.162.1.2
  58 #       define CONFIG_NETMASK           255.255.255.0
  59 #       define CONFIG_SERVERIP          192.162.1.1
  60 #       define CONFIG_GATEWAYIP         192.162.1.1
  61
  62 /* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */
  63 #       ifndef CONFIG_SYS_DISCOVER_PHY
  64 #               define FECDUPLEX        FULL
  65 #               define FECSPEED         _100BASET
  66 #       else
  67 #               ifndef CONFIG_SYS_FAULT_ECHO_LINK_DOWN
  68 #                       define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
  69 #               endif
  70 #       endif                   /* CONFIG_SYS_DISCOVER_PHY */
  71 #endif
  72
  73 #define CONFIG_HOSTNAME         M54455EVB
  74 #ifdef CONFIG_SYS_STMICRO_BOOT
  75 /* ST Micro serial flash */
  76 #define CONFIG_SYS_LOAD_ADDR2           0x40010013
  77 #define CONFIG_EXTRA_ENV_SETTINGS               \
  78         "netdev=eth0\0"                         \
  79         "inpclk=" __stringify(CONFIG_SYS_INPUT_CLKSRC) "\0"     \
  80         "loadaddr=0x40010000\0"                 \
  81         "sbfhdr=sbfhdr.bin\0"                   \
  82         "uboot=u-boot.bin\0"                    \
  83         "load=tftp ${loadaddr} ${sbfhdr};"      \
  84         "tftp " __stringify(CONFIG_SYS_LOAD_ADDR2) " ${uboot} \0"       \
  85         "upd=run load; run prog\0"              \
  86         "prog=sf probe 0:1 1000000 3;"          \
  87         "sf erase 0 30000;"                     \
  88         "sf write ${loadaddr} 0 0x30000;"       \
  89         "save\0"                                \
  90         ""
  91 #else
  92 /* Atmel and Intel */
  93 #ifdef CONFIG_SYS_ATMEL_BOOT
  94 #       define CONFIG_SYS_UBOOT_END     0x0403FFFF
  95 #elif defined(CONFIG_SYS_INTEL_BOOT)
  96 #       define CONFIG_SYS_UBOOT_END     0x3FFFF
  97 #endif
  98 #define CONFIG_EXTRA_ENV_SETTINGS               \
  99         "netdev=eth0\0"                         \
 100         "inpclk=" __stringify(CONFIG_SYS_INPUT_CLKSRC) "\0"     \
 101         "loadaddr=0x40010000\0"                 \
 102         "uboot=u-boot.bin\0"                    \
 103         "load=tftp ${loadaddr} ${uboot}\0"      \
 104         "upd=run load; run prog\0"              \
 105         "prog=prot off " __stringify(CONFIG_SYS_FLASH_BASE)     \
 106         " " __stringify(CONFIG_SYS_UBOOT_END) ";"               \
 107         "era " __stringify(CONFIG_SYS_FLASH_BASE) " "           \
 108         __stringify(CONFIG_SYS_UBOOT_END) ";"                   \
 109         "cp.b ${loadaddr} " __stringify(CONFIG_SYS_FLASH_BASE)  \
 110         " ${filesize}; save\0"                  \
 111         ""
 112 #endif
 113
 114 /* ATA configuration */
 115 #define CONFIG_IDE_RESET        1
 116 #define CONFIG_IDE_PREINIT      1
 117 #define CONFIG_ATAPI
 118 #undef CONFIG_LBA48
 119
 120 #define CONFIG_SYS_IDE_MAXBUS           1
 121 #define CONFIG_SYS_IDE_MAXDEVICE        2
 122
 123 #define CONFIG_SYS_ATA_BASE_ADDR        0x90000000
 124 #define CONFIG_SYS_ATA_IDE0_OFFSET      0
 125
 126 #define CONFIG_SYS_ATA_DATA_OFFSET      0xA0    /* Offset for data I/O                            */
 127 #define CONFIG_SYS_ATA_REG_OFFSET       0xA0    /* Offset for normal register accesses */
 128 #define CONFIG_SYS_ATA_ALT_OFFSET       0xC0    /* Offset for alternate registers           */
 129 #define CONFIG_SYS_ATA_STRIDE           4       /* Interval between registers                 */
 130
 131 /* Realtime clock */
 132 #define CONFIG_MCFRTC
 133 #undef RTC_DEBUG
 134 #define CONFIG_SYS_RTC_OSCILLATOR       (32 * CONFIG_SYS_HZ)
 135
 136 /* Timer */
 137 #define CONFIG_MCFTMR
 138 #undef CONFIG_MCFPIT
 139
 140 /* I2c */
 141 #define CONFIG_SYS_I2C
 142 #define CONFIG_SYS_I2C_FSL
 143 #define CONFIG_SYS_FSL_I2C_SPEED        80000
 144 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 145 #define CONFIG_SYS_FSL_I2C_OFFSET       0x58000
 146 #define CONFIG_SYS_IMMR         CONFIG_SYS_MBAR
 147
 148 /* DSPI and Serial Flash */
 149 #define CONFIG_CF_SPI
 150 #define CONFIG_CF_DSPI
 151 #define CONFIG_HARD_SPI
 152 #define CONFIG_SYS_SBFHDR_SIZE          0x13
 153 #ifdef CONFIG_CMD_SPI
 154
 155 #       define CONFIG_SYS_DSPI_CTAR0            (DSPI_CTAR_TRSZ(7) | \
 156                                          DSPI_CTAR_PCSSCK_1CLK | \
 157                                          DSPI_CTAR_PASC(0) | \
 158                                          DSPI_CTAR_PDT(0) | \
 159                                          DSPI_CTAR_CSSCK(0) | \
 160                                          DSPI_CTAR_ASC(0) | \
 161                                          DSPI_CTAR_DT(1))
 162 #endif
 163
 164 /* PCI */
 165 #ifdef CONFIG_CMD_PCI
 166 #define CONFIG_PCIAUTO_SKIP_HOST_BRIDGE 1
 167
 168 #define CONFIG_SYS_PCI_CACHE_LINE_SIZE  4
 169
 170 #define CONFIG_SYS_PCI_MEM_BUS          0xA0000000
 171 #define CONFIG_SYS_PCI_MEM_PHYS CONFIG_SYS_PCI_MEM_BUS
 172 #define CONFIG_SYS_PCI_MEM_SIZE 0x10000000
 173
 174 #define CONFIG_SYS_PCI_IO_BUS           0xB1000000
 175 #define CONFIG_SYS_PCI_IO_PHYS          CONFIG_SYS_PCI_IO_BUS
 176 #define CONFIG_SYS_PCI_IO_SIZE          0x01000000
 177
 178 #define CONFIG_SYS_PCI_CFG_BUS          0xB0000000
 179 #define CONFIG_SYS_PCI_CFG_PHYS CONFIG_SYS_PCI_CFG_BUS
 180 #define CONFIG_SYS_PCI_CFG_SIZE 0x01000000
 181 #endif
 182
 183 /* FPGA - Spartan 2 */
 184 /* experiment
 185 #define CONFIG_FPGA
 186 #define CONFIG_FPGA_COUNT       1
 187 #define CONFIG_SYS_FPGA_PROG_FEEDBACK
 188 #define CONFIG_SYS_FPGA_CHECK_CTRLC
 189 */
 190
 191 /* Input, PCI, Flexbus, and VCO */
 192 #define CONFIG_EXTRA_CLOCK
 193
 194 #define CONFIG_PRAM             2048    /* 2048 KB */
 195
 196 #define CONFIG_SYS_LONGHELP             /* undef to save memory */
 197
 198 #define CONFIG_SYS_MAXARGS              16      /* max number of command args */
 199 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE       /* Boot Argument Buffer Size    */
 200
 201 #define CONFIG_SYS_LOAD_ADDR            (CONFIG_SYS_SDRAM_BASE + 0x10000)
 202
 203 #define CONFIG_SYS_MBAR         0xFC000000
 204
 205 /*
 206  * Low Level Configuration Settings
 207  * (address mappings, register initial values, etc.)
 208  * You should know what you are doing if you make changes here.
 209  */
 210
 211 /*-----------------------------------------------------------------------
 212  * Definitions for initial stack pointer and data area (in DPRAM)
 213  */
 214 #define CONFIG_SYS_INIT_RAM_ADDR        0x80000000
 215 #define CONFIG_SYS_INIT_RAM_SIZE                0x8000  /* Size of used area in internal SRAM */
 216 #define CONFIG_SYS_INIT_RAM_CTRL        0x221
 217 #define CONFIG_SYS_GBL_DATA_OFFSET      ((CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) - 32)
 218 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 219 #define CONFIG_SYS_SBFHDR_DATA_OFFSET   (CONFIG_SYS_INIT_RAM_SIZE - 32)
 220
 221 /*-----------------------------------------------------------------------
 222  * Start addresses for the final memory configuration
 223  * (Set up by the startup code)
 224  * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
 225  */
 226 #define CONFIG_SYS_SDRAM_BASE           0x40000000
 227 #define CONFIG_SYS_SDRAM_BASE1          0x48000000
 228 #define CONFIG_SYS_SDRAM_SIZE           256     /* SDRAM size in MB */
 229 #define CONFIG_SYS_SDRAM_CFG1           0x65311610
 230 #define CONFIG_SYS_SDRAM_CFG2           0x59670000
 231 #define CONFIG_SYS_SDRAM_CTRL           0xEA0B2000
 232 #define CONFIG_SYS_SDRAM_EMOD           0x40010000
 233 #define CONFIG_SYS_SDRAM_MODE           0x00010033
 234 #define CONFIG_SYS_SDRAM_DRV_STRENGTH   0xAA
 235
 236 #define CONFIG_SYS_MEMTEST_START        CONFIG_SYS_SDRAM_BASE + 0x400
 237 #define CONFIG_SYS_MEMTEST_END          ((CONFIG_SYS_SDRAM_SIZE - 3) << 20)
 238
 239 #ifdef CONFIG_CF_SBF
 240 #       define CONFIG_SERIAL_BOOT
 241 #       define CONFIG_SYS_MONITOR_BASE  (CONFIG_SYS_TEXT_BASE + 0x400)
 242 #else
 243 #       define CONFIG_SYS_MONITOR_BASE  (CONFIG_SYS_FLASH_BASE + 0x400)
 244 #endif
 245 #define CONFIG_SYS_BOOTPARAMS_LEN       64*1024
 246 #define CONFIG_SYS_MONITOR_LEN          (256 << 10)     /* Reserve 256 kB for Monitor */
 247
 248 /* Reserve 256 kB for malloc() */
 249 #define CONFIG_SYS_MALLOC_LEN           (256 << 10)
 250
 251 /*
 252  * For booting Linux, the board info and command line data
 253  * have to be in the first 8 MB of memory, since this is
 254  * the maximum mapped by the Linux kernel during initialization ??
 255  */
 256 /* Initial Memory map for Linux */
 257 #define CONFIG_SYS_BOOTMAPSZ            (CONFIG_SYS_SDRAM_BASE + (CONFIG_SYS_SDRAM_SIZE << 20))
 258
 259 /*
 260  * Configuration for environment
 261  * Environment is not embedded in u-boot. First time runing may have env
 262  * crc error warning if there is no correct environment on the flash.
 263  */
 264 #ifdef CONFIG_CF_SBF
 265 #       define CONFIG_ENV_SPI_CS                1
 266 #endif
 267 #undef CONFIG_ENV_OVERWRITE
 268
 269 /*-----------------------------------------------------------------------
 270  * FLASH organization
 271  */
 272 #ifdef CONFIG_SYS_STMICRO_BOOT
 273 #       define CONFIG_SYS_FLASH_BASE            CONFIG_SYS_CS0_BASE
 274 #       define CONFIG_SYS_FLASH0_BASE           CONFIG_SYS_CS1_BASE
 275 #       define CONFIG_ENV_OFFSET                0x30000
 276 #       define CONFIG_ENV_SIZE          0x2000
 277 #       define CONFIG_ENV_SECT_SIZE     0x10000
 278 #endif
 279 #ifdef CONFIG_SYS_ATMEL_BOOT
 280 #       define CONFIG_SYS_FLASH_BASE            CONFIG_SYS_CS0_BASE
 281 #       define CONFIG_SYS_FLASH0_BASE           CONFIG_SYS_CS0_BASE
 282 #       define CONFIG_SYS_FLASH1_BASE           CONFIG_SYS_CS1_BASE
 283 #       define CONFIG_ENV_ADDR          (CONFIG_SYS_FLASH_BASE + 0x40000)
 284 #       define CONFIG_ENV_SIZE          0x2000
 285 #       define CONFIG_ENV_SECT_SIZE     0x10000
 286 #endif
 287 #ifdef CONFIG_SYS_INTEL_BOOT
 288 #       define CONFIG_SYS_FLASH_BASE            CONFIG_SYS_CS0_BASE
 289 #       define CONFIG_SYS_FLASH0_BASE           CONFIG_SYS_CS0_BASE
 290 #       define CONFIG_SYS_FLASH1_BASE           CONFIG_SYS_CS1_BASE
 291 #       define CONFIG_ENV_ADDR          (CONFIG_SYS_FLASH_BASE + 0x40000)
 292 #       define CONFIG_ENV_SIZE          0x2000
 293 #       define CONFIG_ENV_SECT_SIZE     0x20000
 294 #endif
 295
 296 #define CONFIG_SYS_FLASH_CFI
 297 #ifdef CONFIG_SYS_FLASH_CFI
 298
 299 #       define CONFIG_FLASH_CFI_DRIVER  1
 300 #       define CONFIG_SYS_FLASH_USE_BUFFER_WRITE        1
 301 #       define CONFIG_SYS_FLASH_SIZE            0x1000000       /* Max size that the board might have */
 302 #       define CONFIG_SYS_FLASH_CFI_WIDTH       FLASH_CFI_8BIT
 303 #       define CONFIG_SYS_MAX_FLASH_BANKS       2       /* max number of memory banks */
 304 #       define CONFIG_SYS_MAX_FLASH_SECT        137     /* max number of sectors on one chip */
 305 #       define CONFIG_SYS_FLASH_PROTECTION      /* "Real" (hardware) sectors protection */
 306 #       define CONFIG_SYS_FLASH_CHECKSUM
 307 #       define CONFIG_SYS_FLASH_BANKS_LIST      { CONFIG_SYS_CS0_BASE, CONFIG_SYS_CS1_BASE }
 308 #       define CONFIG_FLASH_CFI_LEGACY
 309
 310 #ifdef CONFIG_FLASH_CFI_LEGACY
 311 #       define CONFIG_SYS_ATMEL_REGION          4
 312 #       define CONFIG_SYS_ATMEL_TOTALSECT       11
 313 #       define CONFIG_SYS_ATMEL_SECT            {1, 2, 1, 7}
 314 #       define CONFIG_SYS_ATMEL_SECTSZ          {0x4000, 0x2000, 0x8000, 0x10000}
 315 #endif
 316 #endif
 317
 318 /*
 319  * This is setting for JFFS2 support in u-boot.
 320  * NOTE: Enable CONFIG_CMD_JFFS2 for JFFS2 support.
 321  */
 322 #ifdef CONFIG_CMD_JFFS2
 323 #ifdef CF_STMICRO_BOOT
 324 #       define CONFIG_JFFS2_DEV         "nor1"
 325 #       define CONFIG_JFFS2_PART_SIZE   0x01000000
 326 #       define CONFIG_JFFS2_PART_OFFSET (CONFIG_SYS_FLASH2_BASE + 0x500000)
 327 #endif
 328 #ifdef CONFIG_SYS_ATMEL_BOOT
 329 #       define CONFIG_JFFS2_DEV         "nor1"
 330 #       define CONFIG_JFFS2_PART_SIZE   0x01000000
 331 #       define CONFIG_JFFS2_PART_OFFSET (CONFIG_SYS_FLASH1_BASE + 0x500000)
 332 #endif
 333 #ifdef CONFIG_SYS_INTEL_BOOT
 334 #       define CONFIG_JFFS2_DEV         "nor0"
 335 #       define CONFIG_JFFS2_PART_SIZE   (0x01000000 - 0x500000)
 336 #       define CONFIG_JFFS2_PART_OFFSET (CONFIG_SYS_FLASH0_BASE + 0x500000)
 337 #endif
 338 #endif
 339
 340 /*-----------------------------------------------------------------------
 341  * Cache Configuration
 342  */
 343 #define CONFIG_SYS_CACHELINE_SIZE               16
 344
 345 #define ICACHE_STATUS                   (CONFIG_SYS_INIT_RAM_ADDR + \
 346                                          CONFIG_SYS_INIT_RAM_SIZE - 8)
 347 #define DCACHE_STATUS                   (CONFIG_SYS_INIT_RAM_ADDR + \
 348                                          CONFIG_SYS_INIT_RAM_SIZE - 4)
 349 #define CONFIG_SYS_ICACHE_INV           (CF_CACR_BCINVA + CF_CACR_ICINVA)
 350 #define CONFIG_SYS_DCACHE_INV           (CF_CACR_DCINVA)
 351 #define CONFIG_SYS_CACHE_ACR2           (CONFIG_SYS_SDRAM_BASE | \
 352                                          CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \
 353                                          CF_ACR_EN | CF_ACR_SM_ALL)
 354 #define CONFIG_SYS_CACHE_ICACR          (CF_CACR_BEC | CF_CACR_IEC | \
 355                                          CF_CACR_ICINVA | CF_CACR_EUSP)
 356 #define CONFIG_SYS_CACHE_DCACR          ((CONFIG_SYS_CACHE_ICACR | \
 357                                          CF_CACR_DEC | CF_CACR_DDCM_P | \
 358                                          CF_CACR_DCINVA) & ~CF_CACR_ICINVA)
 359
 360 /*-----------------------------------------------------------------------
 361  * Memory bank definitions
 362  */
 363 /*
 364  * CS0 - NOR Flash 1, 2, 4, or 8MB
 365  * CS1 - CompactFlash and registers
 366  * CS2 - CPLD
 367  * CS3 - FPGA
 368  * CS4 - Available
 369  * CS5 - Available
 370  */
 371
 372 #if defined(CONFIG_SYS_ATMEL_BOOT) || defined(CONFIG_SYS_STMICRO_BOOT)
 373  /* Atmel Flash */
 374 #define CONFIG_SYS_CS0_BASE             0x04000000
 375 #define CONFIG_SYS_CS0_MASK             0x00070001
 376 #define CONFIG_SYS_CS0_CTRL             0x00001140
 377 /* Intel Flash */
 378 #define CONFIG_SYS_CS1_BASE             0x00000000
 379 #define CONFIG_SYS_CS1_MASK             0x01FF0001
 380 #define CONFIG_SYS_CS1_CTRL             0x00000D60
 381
 382 #define CONFIG_SYS_ATMEL_BASE           CONFIG_SYS_CS0_BASE
 383 #else
 384 /* Intel Flash */
 385 #define CONFIG_SYS_CS0_BASE             0x00000000
 386 #define CONFIG_SYS_CS0_MASK             0x01FF0001
 387 #define CONFIG_SYS_CS0_CTRL             0x00000D60
 388  /* Atmel Flash */
 389 #define CONFIG_SYS_CS1_BASE             0x04000000
 390 #define CONFIG_SYS_CS1_MASK             0x00070001
 391 #define CONFIG_SYS_CS1_CTRL             0x00001140
 392
 393 #define CONFIG_SYS_ATMEL_BASE           CONFIG_SYS_CS1_BASE
 394 #endif
 395
 396 /* CPLD */
 397 #define CONFIG_SYS_CS2_BASE             0x08000000
 398 #define CONFIG_SYS_CS2_MASK             0x00070001
 399 #define CONFIG_SYS_CS2_CTRL             0x003f1140
 400
 401 /* FPGA */
 402 #define CONFIG_SYS_CS3_BASE             0x09000000
 403 #define CONFIG_SYS_CS3_MASK             0x00070001
 404 #define CONFIG_SYS_CS3_CTRL             0x00000020
 405
 406 #endif                          /* _M54455EVB_H */