include/configs/M54455EVB.h

   1 /*
   2  * Configuation settings for the Freescale MCF54455 EVB board.
   3  *
   4  * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
   5  * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
   6  *
   7  * SPDX-License-Identifier:     GPL-2.0+
   8  */
   9
  10 /*
  11  * board/config.h - configuration options, board specific
  12  */
  13
  14 #ifndef _M54455EVB_H
  15 #define _M54455EVB_H
  16
  17 /*
  18  * High Level Configuration Options
  19  * (easy to change)
  20  */
  21 #define CONFIG_M54455EVB        /* M54455EVB board */
  22
  23 #define CONFIG_DISPLAY_BOARDINFO
  24
  25 #define CONFIG_MCFUART
  26 #define CONFIG_SYS_UART_PORT            (0)
  27 #define CONFIG_BAUDRATE         115200
  28
  29 #undef CONFIG_WATCHDOG
  30
  31 #define CONFIG_TIMESTAMP        /* Print image info with timestamp */
  32
  33 /*
  34  * BOOTP options
  35  */
  36 #define CONFIG_BOOTP_BOOTFILESIZE
  37 #define CONFIG_BOOTP_BOOTPATH
  38 #define CONFIG_BOOTP_GATEWAY
  39 #define CONFIG_BOOTP_HOSTNAME
  40
  41 /* Command line configuration */
  42 #include <config_cmd_default.h>
  43
  44 #define CONFIG_CMD_BOOTD
  45 #define CONFIG_CMD_CACHE
  46 #define CONFIG_CMD_DATE
  47 #define CONFIG_CMD_DHCP
  48 #define CONFIG_CMD_ELF
  49 #define CONFIG_CMD_EXT2
  50 #define CONFIG_CMD_FAT
  51 #define CONFIG_CMD_FLASH
  52 #define CONFIG_CMD_I2C
  53 #define CONFIG_CMD_IDE
  54 #define CONFIG_CMD_JFFS2
  55 #define CONFIG_CMD_MEMORY
  56 #define CONFIG_CMD_MISC
  57 #define CONFIG_CMD_MII
  58 #define CONFIG_CMD_NET
  59 #undef CONFIG_CMD_PCI
  60 #define CONFIG_CMD_PING
  61 #define CONFIG_CMD_REGINFO
  62 #define CONFIG_CMD_SPI
  63 #define CONFIG_CMD_SF
  64
  65 #undef CONFIG_CMD_LOADB
  66 #undef CONFIG_CMD_LOADS
  67
  68 /* Network configuration */
  69 #define CONFIG_MCFFEC
  70 #ifdef CONFIG_MCFFEC
  71 #       define CONFIG_MII               1
  72 #       define CONFIG_MII_INIT          1
  73 #       define CONFIG_SYS_DISCOVER_PHY
  74 #       define CONFIG_SYS_RX_ETH_BUFFER 8
  75 #       define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
  76
  77 #       define CONFIG_SYS_FEC0_PINMUX   0
  78 #       define CONFIG_SYS_FEC1_PINMUX   0
  79 #       define CONFIG_SYS_FEC0_MIIBASE  CONFIG_SYS_FEC0_IOBASE
  80 #       define CONFIG_SYS_FEC1_MIIBASE  CONFIG_SYS_FEC0_IOBASE
  81 #       define MCFFEC_TOUT_LOOP 50000
  82 #       define CONFIG_HAS_ETH1
  83
  84 #       define CONFIG_BOOTDELAY 1       /* autoboot after 5 seconds */
  85 #       define CONFIG_BOOTARGS          "root=/dev/mtdblock1 rw rootfstype=jffs2 ip=none mtdparts=physmap-flash.0:5M(kernel)ro,-(jffs2)"
  86 #       define CONFIG_ETHPRIME          "FEC0"
  87 #       define CONFIG_IPADDR            192.162.1.2
  88 #       define CONFIG_NETMASK           255.255.255.0
  89 #       define CONFIG_SERVERIP          192.162.1.1
  90 #       define CONFIG_GATEWAYIP         192.162.1.1
  91
  92 /* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */
  93 #       ifndef CONFIG_SYS_DISCOVER_PHY
  94 #               define FECDUPLEX        FULL
  95 #               define FECSPEED         _100BASET
  96 #       else
  97 #               ifndef CONFIG_SYS_FAULT_ECHO_LINK_DOWN
  98 #                       define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
  99 #               endif
 100 #       endif                   /* CONFIG_SYS_DISCOVER_PHY */
 101 #endif
 102
 103 #define CONFIG_HOSTNAME         M54455EVB
 104 #ifdef CONFIG_SYS_STMICRO_BOOT
 105 /* ST Micro serial flash */
 106 #define CONFIG_SYS_LOAD_ADDR2           0x40010013
 107 #define CONFIG_EXTRA_ENV_SETTINGS               \
 108         "netdev=eth0\0"                         \
 109         "inpclk=" __stringify(CONFIG_SYS_INPUT_CLKSRC) "\0"     \
 110         "loadaddr=0x40010000\0"                 \
 111         "sbfhdr=sbfhdr.bin\0"                   \
 112         "uboot=u-boot.bin\0"                    \
 113         "load=tftp ${loadaddr} ${sbfhdr};"      \
 114         "tftp " __stringify(CONFIG_SYS_LOAD_ADDR2) " ${uboot} \0"       \
 115         "upd=run load; run prog\0"              \
 116         "prog=sf probe 0:1 1000000 3;"          \
 117         "sf erase 0 30000;"                     \
 118         "sf write ${loadaddr} 0 0x30000;"       \
 119         "save\0"                                \
 120         ""
 121 #else
 122 /* Atmel and Intel */
 123 #ifdef CONFIG_SYS_ATMEL_BOOT
 124 #       define CONFIG_SYS_UBOOT_END     0x0403FFFF
 125 #elif defined(CONFIG_SYS_INTEL_BOOT)
 126 #       define CONFIG_SYS_UBOOT_END     0x3FFFF
 127 #endif
 128 #define CONFIG_EXTRA_ENV_SETTINGS               \
 129         "netdev=eth0\0"                         \
 130         "inpclk=" __stringify(CONFIG_SYS_INPUT_CLKSRC) "\0"     \
 131         "loadaddr=0x40010000\0"                 \
 132         "uboot=u-boot.bin\0"                    \
 133         "load=tftp ${loadaddr} ${uboot}\0"      \
 134         "upd=run load; run prog\0"              \
 135         "prog=prot off " __stringify(CONFIG_SYS_FLASH_BASE)     \
 136         " " __stringify(CONFIG_SYS_UBOOT_END) ";"               \
 137         "era " __stringify(CONFIG_SYS_FLASH_BASE) " "           \
 138         __stringify(CONFIG_SYS_UBOOT_END) ";"                   \
 139         "cp.b ${loadaddr} " __stringify(CONFIG_SYS_FLASH_BASE)  \
 140         " ${filesize}; save\0"                  \
 141         ""
 142 #endif
 143
 144 /* ATA configuration */
 145 #define CONFIG_ISO_PARTITION
 146 #define CONFIG_DOS_PARTITION
 147 #define CONFIG_IDE_RESET        1
 148 #define CONFIG_IDE_PREINIT      1
 149 #define CONFIG_ATAPI
 150 #undef CONFIG_LBA48
 151
 152 #define CONFIG_SYS_IDE_MAXBUS           1
 153 #define CONFIG_SYS_IDE_MAXDEVICE        2
 154
 155 #define CONFIG_SYS_ATA_BASE_ADDR        0x90000000
 156 #define CONFIG_SYS_ATA_IDE0_OFFSET      0
 157
 158 #define CONFIG_SYS_ATA_DATA_OFFSET      0xA0    /* Offset for data I/O                            */
 159 #define CONFIG_SYS_ATA_REG_OFFSET       0xA0    /* Offset for normal register accesses */
 160 #define CONFIG_SYS_ATA_ALT_OFFSET       0xC0    /* Offset for alternate registers           */
 161 #define CONFIG_SYS_ATA_STRIDE           4       /* Interval between registers                 */
 162
 163 /* Realtime clock */
 164 #define CONFIG_MCFRTC
 165 #undef RTC_DEBUG
 166 #define CONFIG_SYS_RTC_OSCILLATOR       (32 * CONFIG_SYS_HZ)
 167
 168 /* Timer */
 169 #define CONFIG_MCFTMR
 170 #undef CONFIG_MCFPIT
 171
 172 /* I2c */
 173 #define CONFIG_SYS_I2C
 174 #define CONFIG_SYS_I2C_FSL
 175 #define CONFIG_SYS_FSL_I2C_SPEED        80000
 176 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 177 #define CONFIG_SYS_FSL_I2C_OFFSET       0x58000
 178 #define CONFIG_SYS_IMMR         CONFIG_SYS_MBAR
 179
 180 /* DSPI and Serial Flash */
 181 #define CONFIG_CF_SPI
 182 #define CONFIG_CF_DSPI
 183 #define CONFIG_HARD_SPI
 184 #define CONFIG_SYS_SBFHDR_SIZE          0x13
 185 #ifdef CONFIG_CMD_SPI
 186 #       define CONFIG_SPI_FLASH
 187 #       define CONFIG_SPI_FLASH_STMICRO
 188
 189 #       define CONFIG_SYS_DSPI_CTAR0            (DSPI_CTAR_TRSZ(7) | \
 190                                          DSPI_CTAR_PCSSCK_1CLK | \
 191                                          DSPI_CTAR_PASC(0) | \
 192                                          DSPI_CTAR_PDT(0) | \
 193                                          DSPI_CTAR_CSSCK(0) | \
 194                                          DSPI_CTAR_ASC(0) | \
 195                                          DSPI_CTAR_DT(1))
 196 #endif
 197
 198 /* PCI */
 199 #ifdef CONFIG_CMD_PCI
 200 #define CONFIG_PCI              1
 201 #define CONFIG_PCI_PNP          1
 202 #define CONFIG_PCIAUTO_SKIP_HOST_BRIDGE 1
 203
 204 #define CONFIG_SYS_PCI_CACHE_LINE_SIZE  4
 205
 206 #define CONFIG_SYS_PCI_MEM_BUS          0xA0000000
 207 #define CONFIG_SYS_PCI_MEM_PHYS CONFIG_SYS_PCI_MEM_BUS
 208 #define CONFIG_SYS_PCI_MEM_SIZE 0x10000000
 209
 210 #define CONFIG_SYS_PCI_IO_BUS           0xB1000000
 211 #define CONFIG_SYS_PCI_IO_PHYS          CONFIG_SYS_PCI_IO_BUS
 212 #define CONFIG_SYS_PCI_IO_SIZE          0x01000000
 213
 214 #define CONFIG_SYS_PCI_CFG_BUS          0xB0000000
 215 #define CONFIG_SYS_PCI_CFG_PHYS CONFIG_SYS_PCI_CFG_BUS
 216 #define CONFIG_SYS_PCI_CFG_SIZE 0x01000000
 217 #endif
 218
 219 /* FPGA - Spartan 2 */
 220 /* experiment
 221 #define CONFIG_FPGA
 222 #define CONFIG_FPGA_COUNT       1
 223 #define CONFIG_SYS_FPGA_PROG_FEEDBACK
 224 #define CONFIG_SYS_FPGA_CHECK_CTRLC
 225 */
 226
 227 /* Input, PCI, Flexbus, and VCO */
 228 #define CONFIG_EXTRA_CLOCK
 229
 230 #define CONFIG_PRAM             2048    /* 2048 KB */
 231
 232 #define CONFIG_SYS_PROMPT               "-> "
 233 #define CONFIG_SYS_LONGHELP             /* undef to save memory */
 234
 235 #if defined(CONFIG_CMD_KGDB)
 236 #define CONFIG_SYS_CBSIZE                       1024    /* Console I/O Buffer Size */
 237 #else
 238 #define CONFIG_SYS_CBSIZE                       256     /* Console I/O Buffer Size */
 239 #endif
 240 #define CONFIG_SYS_PBSIZE               (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)        /* Print Buffer Size */
 241 #define CONFIG_SYS_MAXARGS              16      /* max number of command args */
 242 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE       /* Boot Argument Buffer Size    */
 243
 244 #define CONFIG_SYS_LOAD_ADDR            (CONFIG_SYS_SDRAM_BASE + 0x10000)
 245
 246 #define CONFIG_SYS_MBAR         0xFC000000
 247
 248 /*
 249  * Low Level Configuration Settings
 250  * (address mappings, register initial values, etc.)
 251  * You should know what you are doing if you make changes here.
 252  */
 253
 254 /*-----------------------------------------------------------------------
 255  * Definitions for initial stack pointer and data area (in DPRAM)
 256  */
 257 #define CONFIG_SYS_INIT_RAM_ADDR        0x80000000
 258 #define CONFIG_SYS_INIT_RAM_SIZE                0x8000  /* Size of used area in internal SRAM */
 259 #define CONFIG_SYS_INIT_RAM_CTRL        0x221
 260 #define CONFIG_SYS_GBL_DATA_OFFSET      ((CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) - 32)
 261 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 262 #define CONFIG_SYS_SBFHDR_DATA_OFFSET   (CONFIG_SYS_INIT_RAM_SIZE - 32)
 263
 264 /*-----------------------------------------------------------------------
 265  * Start addresses for the final memory configuration
 266  * (Set up by the startup code)
 267  * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
 268  */
 269 #define CONFIG_SYS_SDRAM_BASE           0x40000000
 270 #define CONFIG_SYS_SDRAM_BASE1          0x48000000
 271 #define CONFIG_SYS_SDRAM_SIZE           256     /* SDRAM size in MB */
 272 #define CONFIG_SYS_SDRAM_CFG1           0x65311610
 273 #define CONFIG_SYS_SDRAM_CFG2           0x59670000
 274 #define CONFIG_SYS_SDRAM_CTRL           0xEA0B2000
 275 #define CONFIG_SYS_SDRAM_EMOD           0x40010000
 276 #define CONFIG_SYS_SDRAM_MODE           0x00010033
 277 #define CONFIG_SYS_SDRAM_DRV_STRENGTH   0xAA
 278
 279 #define CONFIG_SYS_MEMTEST_START        CONFIG_SYS_SDRAM_BASE + 0x400
 280 #define CONFIG_SYS_MEMTEST_END          ((CONFIG_SYS_SDRAM_SIZE - 3) << 20)
 281
 282 #ifdef CONFIG_CF_SBF
 283 #       define CONFIG_SERIAL_BOOT
 284 #       define CONFIG_SYS_MONITOR_BASE  (CONFIG_SYS_TEXT_BASE + 0x400)
 285 #else
 286 #       define CONFIG_SYS_MONITOR_BASE  (CONFIG_SYS_FLASH_BASE + 0x400)
 287 #endif
 288 #define CONFIG_SYS_BOOTPARAMS_LEN       64*1024
 289 #define CONFIG_SYS_MONITOR_LEN          (256 << 10)     /* Reserve 256 kB for Monitor */
 290
 291 /* Reserve 256 kB for malloc() */
 292 #define CONFIG_SYS_MALLOC_LEN           (256 << 10)
 293
 294 /*
 295  * For booting Linux, the board info and command line data
 296  * have to be in the first 8 MB of memory, since this is
 297  * the maximum mapped by the Linux kernel during initialization ??
 298  */
 299 /* Initial Memory map for Linux */
 300 #define CONFIG_SYS_BOOTMAPSZ            (CONFIG_SYS_SDRAM_BASE + (CONFIG_SYS_SDRAM_SIZE << 20))
 301
 302 /*
 303  * Configuration for environment
 304  * Environment is not embedded in u-boot. First time runing may have env
 305  * crc error warning if there is no correct environment on the flash.
 306  */
 307 #ifdef CONFIG_CF_SBF
 308 #       define CONFIG_ENV_IS_IN_SPI_FLASH
 309 #       define CONFIG_ENV_SPI_CS                1
 310 #else
 311 #       define CONFIG_ENV_IS_IN_FLASH   1
 312 #endif
 313 #undef CONFIG_ENV_OVERWRITE
 314
 315 /*-----------------------------------------------------------------------
 316  * FLASH organization
 317  */
 318 #ifdef CONFIG_SYS_STMICRO_BOOT
 319 #       define CONFIG_SYS_FLASH_BASE            CONFIG_SYS_CS0_BASE
 320 #       define CONFIG_SYS_FLASH0_BASE           CONFIG_SYS_CS1_BASE
 321 #       define CONFIG_ENV_OFFSET                0x30000
 322 #       define CONFIG_ENV_SIZE          0x2000
 323 #       define CONFIG_ENV_SECT_SIZE     0x10000
 324 #endif
 325 #ifdef CONFIG_SYS_ATMEL_BOOT
 326 #       define CONFIG_SYS_FLASH_BASE            CONFIG_SYS_CS0_BASE
 327 #       define CONFIG_SYS_FLASH0_BASE           CONFIG_SYS_CS0_BASE
 328 #       define CONFIG_SYS_FLASH1_BASE           CONFIG_SYS_CS1_BASE
 329 #       define CONFIG_ENV_ADDR          (CONFIG_SYS_FLASH_BASE + 0x40000)
 330 #       define CONFIG_ENV_SIZE          0x2000
 331 #       define CONFIG_ENV_SECT_SIZE     0x10000
 332 #endif
 333 #ifdef CONFIG_SYS_INTEL_BOOT
 334 #       define CONFIG_SYS_FLASH_BASE            CONFIG_SYS_CS0_BASE
 335 #       define CONFIG_SYS_FLASH0_BASE           CONFIG_SYS_CS0_BASE
 336 #       define CONFIG_SYS_FLASH1_BASE           CONFIG_SYS_CS1_BASE
 337 #       define CONFIG_ENV_ADDR          (CONFIG_SYS_FLASH_BASE + 0x40000)
 338 #       define CONFIG_ENV_SIZE          0x2000
 339 #       define CONFIG_ENV_SECT_SIZE     0x20000
 340 #endif
 341
 342 #define CONFIG_SYS_FLASH_CFI
 343 #ifdef CONFIG_SYS_FLASH_CFI
 344
 345 #       define CONFIG_FLASH_CFI_DRIVER  1
 346 #       define CONFIG_SYS_FLASH_USE_BUFFER_WRITE        1
 347 #       define CONFIG_SYS_FLASH_SIZE            0x1000000       /* Max size that the board might have */
 348 #       define CONFIG_SYS_FLASH_CFI_WIDTH       FLASH_CFI_8BIT
 349 #       define CONFIG_SYS_MAX_FLASH_BANKS       2       /* max number of memory banks */
 350 #       define CONFIG_SYS_MAX_FLASH_SECT        137     /* max number of sectors on one chip */
 351 #       define CONFIG_SYS_FLASH_PROTECTION      /* "Real" (hardware) sectors protection */
 352 #       define CONFIG_SYS_FLASH_CHECKSUM
 353 #       define CONFIG_SYS_FLASH_BANKS_LIST      { CONFIG_SYS_CS0_BASE, CONFIG_SYS_CS1_BASE }
 354 #       define CONFIG_FLASH_CFI_LEGACY
 355
 356 #ifdef CONFIG_FLASH_CFI_LEGACY
 357 #       define CONFIG_SYS_ATMEL_REGION          4
 358 #       define CONFIG_SYS_ATMEL_TOTALSECT       11
 359 #       define CONFIG_SYS_ATMEL_SECT            {1, 2, 1, 7}
 360 #       define CONFIG_SYS_ATMEL_SECTSZ          {0x4000, 0x2000, 0x8000, 0x10000}
 361 #endif
 362 #endif
 363
 364 /*
 365  * This is setting for JFFS2 support in u-boot.
 366  * NOTE: Enable CONFIG_CMD_JFFS2 for JFFS2 support.
 367  */
 368 #ifdef CONFIG_CMD_JFFS2
 369 #ifdef CF_STMICRO_BOOT
 370 #       define CONFIG_JFFS2_DEV         "nor1"
 371 #       define CONFIG_JFFS2_PART_SIZE   0x01000000
 372 #       define CONFIG_JFFS2_PART_OFFSET (CONFIG_SYS_FLASH2_BASE + 0x500000)
 373 #endif
 374 #ifdef CONFIG_SYS_ATMEL_BOOT
 375 #       define CONFIG_JFFS2_DEV         "nor1"
 376 #       define CONFIG_JFFS2_PART_SIZE   0x01000000
 377 #       define CONFIG_JFFS2_PART_OFFSET (CONFIG_SYS_FLASH1_BASE + 0x500000)
 378 #endif
 379 #ifdef CONFIG_SYS_INTEL_BOOT
 380 #       define CONFIG_JFFS2_DEV         "nor0"
 381 #       define CONFIG_JFFS2_PART_SIZE   (0x01000000 - 0x500000)
 382 #       define CONFIG_JFFS2_PART_OFFSET (CONFIG_SYS_FLASH0_BASE + 0x500000)
 383 #endif
 384 #endif
 385
 386 /*-----------------------------------------------------------------------
 387  * Cache Configuration
 388  */
 389 #define CONFIG_SYS_CACHELINE_SIZE               16
 390
 391 #define ICACHE_STATUS                   (CONFIG_SYS_INIT_RAM_ADDR + \
 392                                          CONFIG_SYS_INIT_RAM_SIZE - 8)
 393 #define DCACHE_STATUS                   (CONFIG_SYS_INIT_RAM_ADDR + \
 394                                          CONFIG_SYS_INIT_RAM_SIZE - 4)
 395 #define CONFIG_SYS_ICACHE_INV           (CF_CACR_BCINVA + CF_CACR_ICINVA)
 396 #define CONFIG_SYS_DCACHE_INV           (CF_CACR_DCINVA)
 397 #define CONFIG_SYS_CACHE_ACR2           (CONFIG_SYS_SDRAM_BASE | \
 398                                          CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \
 399                                          CF_ACR_EN | CF_ACR_SM_ALL)
 400 #define CONFIG_SYS_CACHE_ICACR          (CF_CACR_BEC | CF_CACR_IEC | \
 401                                          CF_CACR_ICINVA | CF_CACR_EUSP)
 402 #define CONFIG_SYS_CACHE_DCACR          ((CONFIG_SYS_CACHE_ICACR | \
 403                                          CF_CACR_DEC | CF_CACR_DDCM_P | \
 404                                          CF_CACR_DCINVA) & ~CF_CACR_ICINVA)
 405
 406 /*-----------------------------------------------------------------------
 407  * Memory bank definitions
 408  */
 409 /*
 410  * CS0 - NOR Flash 1, 2, 4, or 8MB
 411  * CS1 - CompactFlash and registers
 412  * CS2 - CPLD
 413  * CS3 - FPGA
 414  * CS4 - Available
 415  * CS5 - Available
 416  */
 417
 418 #if defined(CONFIG_SYS_ATMEL_BOOT) || defined(CONFIG_SYS_STMICRO_BOOT)
 419  /* Atmel Flash */
 420 #define CONFIG_SYS_CS0_BASE             0x04000000
 421 #define CONFIG_SYS_CS0_MASK             0x00070001
 422 #define CONFIG_SYS_CS0_CTRL             0x00001140
 423 /* Intel Flash */
 424 #define CONFIG_SYS_CS1_BASE             0x00000000
 425 #define CONFIG_SYS_CS1_MASK             0x01FF0001
 426 #define CONFIG_SYS_CS1_CTRL             0x00000D60
 427
 428 #define CONFIG_SYS_ATMEL_BASE           CONFIG_SYS_CS0_BASE
 429 #else
 430 /* Intel Flash */
 431 #define CONFIG_SYS_CS0_BASE             0x00000000
 432 #define CONFIG_SYS_CS0_MASK             0x01FF0001
 433 #define CONFIG_SYS_CS0_CTRL             0x00000D60
 434  /* Atmel Flash */
 435 #define CONFIG_SYS_CS1_BASE             0x04000000
 436 #define CONFIG_SYS_CS1_MASK             0x00070001
 437 #define CONFIG_SYS_CS1_CTRL             0x00001140
 438
 439 #define CONFIG_SYS_ATMEL_BASE           CONFIG_SYS_CS1_BASE
 440 #endif
 441
 442 /* CPLD */
 443 #define CONFIG_SYS_CS2_BASE             0x08000000
 444 #define CONFIG_SYS_CS2_MASK             0x00070001
 445 #define CONFIG_SYS_CS2_CTRL             0x003f1140
 446
 447 /* FPGA */
 448 #define CONFIG_SYS_CS3_BASE             0x09000000
 449 #define CONFIG_SYS_CS3_MASK             0x00070001
 450 #define CONFIG_SYS_CS3_CTRL             0x00000020
 451
 452 #endif                          /* _M54455EVB_H */