include/configs/M54418TWR.h

   1 /*
   2  * Configuation settings for the Freescale MCF54418 TWR board.
   3  *
   4  * Copyright 2010-2012 Freescale Semiconductor, Inc.
   5  * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
   6  *
   7  * SPDX-License-Identifier:     GPL-2.0+
   8  */
   9
  10 /*
  11  * board/config.h - configuration options, board specific
  12  */
  13
  14 #ifndef _M54418TWR_H
  15 #define _M54418TWR_H
  16
  17 /*
  18  * High Level Configuration Options
  19  * (easy to change)
  20  */
  21 #define CONFIG_M54418TWR        /* M54418TWR board */
  22
  23 #define CONFIG_MCFUART
  24 #define CONFIG_SYS_UART_PORT            (0)
  25 #define CONFIG_BAUDRATE         115200
  26 #define CONFIG_SYS_BAUDRATE_TABLE       { 9600 , 19200 , 38400 , 57600, 115200 }
  27
  28 #undef CONFIG_WATCHDOG
  29
  30 #define CONFIG_TIMESTAMP        /* Print image info with timestamp */
  31
  32 /*
  33  * BOOTP options
  34  */
  35 #define CONFIG_BOOTP_BOOTFILESIZE
  36 #define CONFIG_BOOTP_BOOTPATH
  37 #define CONFIG_BOOTP_GATEWAY
  38 #define CONFIG_BOOTP_HOSTNAME
  39
  40 /* Command line configuration */
  41 #undef CONFIG_CMD_DATE
  42 #undef CONFIG_CMD_JFFS2
  43 #undef CONFIG_CMD_NAND
  44 #define CONFIG_CMD_REGINFO
  45
  46 /*
  47  * NAND FLASH
  48  */
  49 #ifdef CONFIG_CMD_NAND
  50 #define CONFIG_JFFS2_NAND
  51 #define CONFIG_NAND_FSL_NFC
  52 #define CONFIG_SYS_NAND_BASE            0xFC0FC000
  53 #define CONFIG_SYS_MAX_NAND_DEVICE      1
  54 #define NAND_MAX_CHIPS                  CONFIG_SYS_MAX_NAND_DEVICE
  55 #define CONFIG_SYS_NAND_SELECT_DEVICE
  56 #endif
  57
  58 /* Network configuration */
  59 #define CONFIG_MCFFEC
  60 #ifdef CONFIG_MCFFEC
  61 #define CONFIG_MII                      1
  62 #define CONFIG_MII_INIT         1
  63 #define CONFIG_SYS_DISCOVER_PHY
  64 #define CONFIG_SYS_RX_ETH_BUFFER        2
  65 #define CONFIG_SYS_FAULT_ECCONFIG_SYS_NO_FLASHHO_LINK_DOWN
  66 #define CONFIG_SYS_TX_ETH_BUFFER        2
  67 #define CONFIG_HAS_ETH1
  68
  69 #define CONFIG_SYS_FEC0_PINMUX          0
  70 #define CONFIG_SYS_FEC0_MIIBASE CONFIG_SYS_FEC0_IOBASE
  71 #define CONFIG_SYS_FEC1_PINMUX          0
  72 #define CONFIG_SYS_FEC1_MIIBASE CONFIG_SYS_FEC0_MIIBASE
  73 #define MCFFEC_TOUT_LOOP                50000
  74 #define CONFIG_SYS_FEC0_PHYADDR 0
  75 #define CONFIG_SYS_FEC1_PHYADDR 1
  76
  77
  78 #ifdef  CONFIG_SYS_NAND_BOOT
  79 #define CONFIG_BOOTARGS "root=/dev/mtdblock2 rw rootfstype=jffs2 " \
  80                                 "mtdparts=NAND:1M(u-boot)ro,7M(kernel)ro," \
  81                                 "-(jffs2) console=ttyS0,115200"
  82 #else
  83 #define CONFIG_BOOTARGS "root=/dev/nfs rw nfsroot="     \
  84                                 __stringify(CONFIG_SERVERIP) ":/tftpboot/" \
  85                                 __stringify(CONFIG_IPADDR) "  ip="      \
  86                                 __stringify(CONFIG_IPADDR) ":"  \
  87                                 __stringify(CONFIG_SERVERIP)":" \
  88                                 __stringify(CONFIG_GATEWAYIP)": "       \
  89                                 __stringify(CONFIG_NETMASK)             \
  90                                 "::eth0:off:rw console=ttyS0,115200"
  91 #endif
  92
  93 #define CONFIG_ETHPRIME "FEC0"
  94 #define CONFIG_IPADDR           192.168.1.2
  95 #define CONFIG_NETMASK          255.255.255.0
  96 #define CONFIG_SERVERIP 192.168.1.1
  97 #define CONFIG_GATEWAYIP        192.168.1.1
  98
  99 #define CONFIG_SYS_FEC_BUF_USE_SRAM
 100 /* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */
 101 #ifndef CONFIG_SYS_DISCOVER_PHY
 102 #define FECDUPLEX       FULL
 103 #define FECSPEED        _100BASET
 104 #define LINKSTATUS      1
 105 #else
 106 #define LINKSTATUS      0
 107 #ifndef CONFIG_SYS_FAULT_ECHO_LINK_DOWN
 108 #define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
 109 #endif
 110 #endif                  /* CONFIG_SYS_DISCOVER_PHY */
 111 #endif
 112
 113 #define CONFIG_HOSTNAME         M54418TWR
 114
 115 #if defined(CONFIG_CF_SBF)
 116 /* ST Micro serial flash */
 117 #define CONFIG_SYS_LOAD_ADDR2           0x40010007
 118 #define CONFIG_EXTRA_ENV_SETTINGS               \
 119         "netdev=eth0\0"                         \
 120         "inpclk=" __stringify(CONFIG_SYS_INPUT_CLKSRC) "\0"     \
 121         "loadaddr=0x40010000\0"                 \
 122         "sbfhdr=sbfhdr.bin\0"                   \
 123         "uboot=u-boot.bin\0"                    \
 124         "load=tftp ${loadaddr} ${sbfhdr};"      \
 125         "tftp " __stringify(CONFIG_SYS_LOAD_ADDR2) " ${uboot} \0"       \
 126         "upd=run load; run prog\0"              \
 127         "prog=sf probe 0:1 1000000 3;"          \
 128         "sf erase 0 40000;"                     \
 129         "sf write ${loadaddr} 0 40000;"         \
 130         "save\0"                                \
 131         ""
 132 #elif defined(CONFIG_SYS_NAND_BOOT)
 133 #define CONFIG_EXTRA_ENV_SETTINGS               \
 134         "netdev=eth0\0"                         \
 135         "inpclk=" __stringify(CONFIG_SYS_INPUT_CLKSRC) "\0"     \
 136         "loadaddr=0x40010000\0"                 \
 137         "u-boot=u-boot.bin\0"                   \
 138         "load=tftp ${loadaddr} ${u-boot};\0"    \
 139         "upd=run load; run prog\0"              \
 140         "prog=nand device 0;"                   \
 141         "nand erase 0 40000;"                   \
 142         "nb_update ${loadaddr} ${filesize};"    \
 143         "save\0"                                \
 144         ""
 145 #else
 146 #define CONFIG_SYS_UBOOT_END    0x3FFFF
 147 #define CONFIG_EXTRA_ENV_SETTINGS               \
 148         "netdev=eth0\0"                         \
 149         "inpclk=" __stringify(CONFIG_SYS_INPUT_CLKSRC) "\0"     \
 150         "loadaddr=40010000\0"                   \
 151         "u-boot=u-boot.bin\0"                   \
 152         "load=tftp ${loadaddr) ${u-boot}\0"     \
 153         "upd=run load; run prog\0"              \
 154         "prog=prot off mram" " ;"       \
 155         "cp.b ${loadaddr} 0 ${filesize};"       \
 156         "save\0"                                \
 157         ""
 158 #endif
 159
 160 /* Realtime clock */
 161 #undef CONFIG_MCFRTC
 162 #define CONFIG_RTC_MCFRRTC
 163 #define CONFIG_SYS_MCFRRTC_BASE         0xFC0A8000
 164
 165 /* Timer */
 166 #define CONFIG_MCFTMR
 167 #undef CONFIG_MCFPIT
 168
 169 /* I2c */
 170 #undef CONFIG_SYS_FSL_I2C
 171 #undef CONFIG_HARD_I2C          /* I2C with hardware support */
 172 #undef  CONFIG_SYS_I2C_SOFT     /* I2C bit-banged */
 173 /* I2C speed and slave address  */
 174 #define CONFIG_SYS_I2C_SPEED            80000
 175 #define CONFIG_SYS_I2C_SLAVE            0x7F
 176 #define CONFIG_SYS_I2C_OFFSET           0x58000
 177 #define CONFIG_SYS_IMMR         CONFIG_SYS_MBAR
 178
 179 /* DSPI and Serial Flash */
 180 #define CONFIG_CF_SPI
 181 #define CONFIG_CF_DSPI
 182 #define CONFIG_SERIAL_FLASH
 183 #define CONFIG_HARD_SPI
 184 #define CONFIG_SYS_SBFHDR_SIZE          0x7
 185 #ifdef CONFIG_CMD_SPI
 186
 187 #       define CONFIG_SYS_DSPI_CTAR0    (DSPI_CTAR_TRSZ(7) | \
 188                                          DSPI_CTAR_PCSSCK_1CLK | \
 189                                          DSPI_CTAR_PASC(0) | \
 190                                          DSPI_CTAR_PDT(0) | \
 191                                          DSPI_CTAR_CSSCK(0) | \
 192                                          DSPI_CTAR_ASC(0) | \
 193                                          DSPI_CTAR_DT(1))
 194 #       define CONFIG_SYS_DSPI_CTAR1    (CONFIG_SYS_DSPI_CTAR0)
 195 #       define CONFIG_SYS_DSPI_CTAR2    (CONFIG_SYS_DSPI_CTAR0)
 196 #endif
 197
 198 /* Input, PCI, Flexbus, and VCO */
 199 #define CONFIG_EXTRA_CLOCK
 200
 201 #define CONFIG_PRAM                     2048    /* 2048 KB */
 202
 203 #define CONFIG_SYS_LONGHELP             /* undef to save memory */
 204
 205 #if defined(CONFIG_CMD_KGDB)
 206 #define CONFIG_SYS_CBSIZE               1024    /* Console I/O Buffer Size */
 207 #else
 208 #define CONFIG_SYS_CBSIZE               256     /* Console I/O Buffer Size */
 209 #endif
 210 /* Print Buffer Size */
 211 #define CONFIG_SYS_PBSIZE               (CONFIG_SYS_CBSIZE + \
 212                                         sizeof(CONFIG_SYS_PROMPT) + 16)
 213 #define CONFIG_SYS_MAXARGS              16      /* max number of command args */
 214 /* Boot Argument Buffer Size    */
 215 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE
 216
 217 #define CONFIG_SYS_LOAD_ADDR            (CONFIG_SYS_SDRAM_BASE + 0x10000)
 218
 219 #define CONFIG_SYS_MBAR         0xFC000000
 220
 221 /*
 222  * Low Level Configuration Settings
 223  * (address mappings, register initial values, etc.)
 224  * You should know what you are doing if you make changes here.
 225  */
 226
 227 /*-----------------------------------------------------------------------
 228  * Definitions for initial stack pointer and data area (in DPRAM)
 229  */
 230 #define CONFIG_SYS_INIT_RAM_ADDR        0x80000000
 231 /* End of used area in internal SRAM */
 232 #define CONFIG_SYS_INIT_RAM_SIZE        0x10000
 233 #define CONFIG_SYS_INIT_RAM_CTRL        0x221
 234 #define CONFIG_SYS_GBL_DATA_OFFSET      ((CONFIG_SYS_INIT_RAM_SIZE - \
 235                                         GENERATED_GBL_DATA_SIZE) - 32)
 236 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 237 #define CONFIG_SYS_SBFHDR_DATA_OFFSET   (CONFIG_SYS_INIT_RAM_SIZE - 32)
 238
 239 /*-----------------------------------------------------------------------
 240  * Start addresses for the final memory configuration
 241  * (Set up by the startup code)
 242  * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
 243  */
 244 #define CONFIG_SYS_SDRAM_BASE           0x40000000
 245 #define CONFIG_SYS_SDRAM_SIZE           128     /* SDRAM size in MB */
 246
 247 #define CONFIG_SYS_MEMTEST_START        (CONFIG_SYS_SDRAM_BASE + 0x400)
 248 #define CONFIG_SYS_MEMTEST_END          ((CONFIG_SYS_SDRAM_SIZE - 3) << 20)
 249 #define CONFIG_SYS_DRAM_TEST
 250
 251 #if defined(CONFIG_CF_SBF) || defined(CONFIG_SYS_NAND_BOOT)
 252 #define CONFIG_SERIAL_BOOT
 253 #endif
 254
 255 #if defined(CONFIG_SERIAL_BOOT)
 256 #define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_TEXT_BASE + 0x400)
 257 #else
 258 #define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE + 0x400)
 259 #endif
 260
 261 #define CONFIG_SYS_BOOTPARAMS_LEN       (64 * 1024)
 262 /* Reserve 256 kB for Monitor */
 263 #define CONFIG_SYS_MONITOR_LEN          (256 << 10)
 264 /* Reserve 256 kB for malloc() */
 265 #define CONFIG_SYS_MALLOC_LEN           (256 << 10)
 266
 267 /*
 268  * For booting Linux, the board info and command line data
 269  * have to be in the first 8 MB of memory, since this is
 270  * the maximum mapped by the Linux kernel during initialization ??
 271  */
 272 /* Initial Memory map for Linux */
 273 #define CONFIG_SYS_BOOTMAPSZ (CONFIG_SYS_SDRAM_BASE + \
 274                                 (CONFIG_SYS_SDRAM_SIZE << 20))
 275
 276 /* Configuration for environment
 277  * Environment is embedded in u-boot in the second sector of the flash
 278  */
 279 #if !defined(CONFIG_SERIAL_BOOT)  /*MRAM boot*/
 280 #define CONFIG_SYS_NO_FLASH
 281 #define CONFIG_ENV_IS_IN_MRAM   1
 282 #define CONFIG_ENV_ADDR         (0x40000 - 0x1000) /*MRAM size 40000*/
 283 #define CONFIG_ENV_SIZE         0x1000
 284 #endif
 285
 286 #if defined(CONFIG_CF_SBF)
 287 #define CONFIG_SYS_NO_FLASH
 288 #define CONFIG_ENV_IS_IN_SPI_FLASH      1
 289 #define CONFIG_ENV_SPI_CS               1
 290 #define CONFIG_ENV_OFFSET               0x40000
 291 #define CONFIG_ENV_SIZE         0x2000
 292 #define CONFIG_ENV_SECT_SIZE            0x10000
 293 #endif
 294 #if defined(CONFIG_SYS_NAND_BOOT)
 295 #define CONFIG_SYS_NO_FLASH
 296 #define CONFIG_ENV_IS_NOWHERE
 297 #define CONFIG_ENV_OFFSET       0x80000
 298 #define CONFIG_ENV_SIZE 0x20000
 299 #define CONFIG_ENV_SECT_SIZE    0x20000
 300 #endif
 301 #undef CONFIG_ENV_OVERWRITE
 302
 303 /* FLASH organization */
 304 #define CONFIG_SYS_FLASH_BASE           CONFIG_SYS_CS0_BASE
 305
 306 #undef CONFIG_SYS_FLASH_CFI
 307 #ifdef CONFIG_SYS_FLASH_CFI
 308
 309 #define CONFIG_FLASH_CFI_DRIVER 1
 310 /* Max size that the board might have */
 311 #define CONFIG_SYS_FLASH_SIZE           0x1000000
 312 #define CONFIG_SYS_FLASH_CFI_WIDTH      FLASH_CFI_16BIT
 313 /* max number of memory banks */
 314 #define CONFIG_SYS_MAX_FLASH_BANKS      1
 315 /* max number of sectors on one chip */
 316 #define CONFIG_SYS_MAX_FLASH_SECT       270
 317 /* "Real" (hardware) sectors protection */
 318 #define CONFIG_SYS_FLASH_PROTECTION
 319 #define CONFIG_SYS_FLASH_CHECKSUM
 320 #define CONFIG_SYS_FLASH_BANKS_LIST     { CONFIG_SYS_CS0_BASE }
 321 #else
 322 /* max number of sectors on one chip */
 323 #define CONFIG_SYS_MAX_FLASH_SECT       270
 324 /* max number of sectors on one chip */
 325 #define CONFIG_SYS_MAX_FLASH_BANKS      0
 326 #endif
 327
 328 /*
 329  * This is setting for JFFS2 support in u-boot.
 330  * NOTE: Enable CONFIG_CMD_JFFS2 for JFFS2 support.
 331  */
 332 #ifdef CONFIG_CMD_JFFS2
 333 #define CONFIG_JFFS2_DEV                "nand0"
 334 #define CONFIG_JFFS2_PART_OFFSET        (0x800000)
 335 #define CONFIG_CMD_MTDPARTS
 336 #define CONFIG_MTD_DEVICE
 337 #define MTDIDS_DEFAULT          "nand0=m54418twr.nand"
 338
 339 #define MTDPARTS_DEFAULT        "mtdparts=m54418twr.nand:1m(data),"     \
 340                                                 "7m(kernel),"           \
 341                                                 "-(rootfs)"
 342
 343 #endif
 344
 345 #ifdef CONFIG_CMD_UBI
 346 #define CONFIG_CMD_MTDPARTS
 347 #define CONFIG_MTD_DEVICE       /* needed for mtdparts command */
 348 #define CONFIG_MTD_PARTITIONS   /* mtdparts and UBI support */
 349 #define CONFIG_RBTREE
 350 #define MTDIDS_DEFAULT          "nand0=NAND"
 351 #define MTDPARTS_DEFAULT        "mtdparts=NAND:1m(u-boot),"     \
 352                                         "-(ubi)"
 353 #endif
 354 /* Cache Configuration */
 355 #define CONFIG_SYS_CACHELINE_SIZE       16
 356 #define ICACHE_STATUS                   (CONFIG_SYS_INIT_RAM_ADDR + \
 357                                          CONFIG_SYS_INIT_RAM_SIZE - 8)
 358 #define DCACHE_STATUS                   (CONFIG_SYS_INIT_RAM_ADDR + \
 359                                          CONFIG_SYS_INIT_RAM_SIZE - 4)
 360 #define CONFIG_SYS_ICACHE_INV           (CF_CACR_BCINVA + CF_CACR_ICINVA)
 361 #define CONFIG_SYS_DCACHE_INV           (CF_CACR_DCINVA)
 362 #define CONFIG_SYS_CACHE_ACR2           (CONFIG_SYS_SDRAM_BASE | \
 363                                          CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \
 364                                          CF_ACR_EN | CF_ACR_SM_ALL)
 365 #define CONFIG_SYS_CACHE_ICACR          (CF_CACR_BEC | CF_CACR_IEC | \
 366                                          CF_CACR_ICINVA | CF_CACR_EUSP)
 367 #define CONFIG_SYS_CACHE_DCACR          ((CONFIG_SYS_CACHE_ICACR | \
 368                                          CF_CACR_DEC | CF_CACR_DDCM_P | \
 369                                          CF_CACR_DCINVA) & ~CF_CACR_ICINVA)
 370
 371 #define CACR_STATUS     (CONFIG_SYS_INIT_RAM_ADDR + \
 372                         CONFIG_SYS_INIT_RAM_SIZE - 12)
 373
 374 /*-----------------------------------------------------------------------
 375  * Memory bank definitions
 376  */
 377 /*
 378  * CS0 - NOR Flash 16MB
 379  * CS1 - Available
 380  * CS2 - Available
 381  * CS3 - Available
 382  * CS4 - Available
 383  * CS5 - Available
 384  */
 385
 386  /* Flash */
 387 #define CONFIG_SYS_CS0_BASE             0x00000000
 388 #define CONFIG_SYS_CS0_MASK             0x000F0101
 389 #define CONFIG_SYS_CS0_CTRL             0x00001D60
 390
 391 #endif                          /* _M54418TWR_H */