include/configs/M53017EVB.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Configuation settings for the Freescale MCF53017EVB.
   4  *
   5  * Copyright (C) 2004-2008 Freescale Semiconductor, Inc.
   6  * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
   7  */
   8
   9 /*
  10  * board/config.h - configuration options, board specific
  11  */
  12
  13 #ifndef _M53017EVB_H
  14 #define _M53017EVB_H
  15
  16 /*
  17  * High Level Configuration Options
  18  * (easy to change)
  19  */
  20
  21 #define CONFIG_SYS_UART_PORT            (0)
  22
  23 #define CONFIG_WATCHDOG_TIMEOUT         5000
  24
  25 #define CONFIG_SYS_UNIFY_CACHE
  26
  27 #ifdef CONFIG_MCFFEC
  28 #       define CONFIG_SYS_DISCOVER_PHY
  29 #       define CONFIG_SYS_TX_ETH_BUFFER 8
  30 #       define CONFIG_SYS_FEC_BUF_USE_SRAM
  31
  32 /* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */
  33 #       ifndef CONFIG_SYS_DISCOVER_PHY
  34 #               define FECDUPLEX        FULL
  35 #               define FECSPEED         _100BASET
  36 #       endif                   /* CONFIG_SYS_DISCOVER_PHY */
  37 #endif
  38
  39 #define CONFIG_SYS_RTC_CNT              (0x8000)
  40 #define CONFIG_SYS_RTC_SETUP            (RTC_OCEN_OSCBYP | RTC_OCEN_CLKEN)
  41
  42 /* I2C */
  43
  44 #ifdef CONFIG_MCFFEC
  45 #       define CONFIG_IPADDR    192.162.1.2
  46 #       define CONFIG_NETMASK   255.255.255.0
  47 #       define CONFIG_SERVERIP  192.162.1.1
  48 #       define CONFIG_GATEWAYIP 192.162.1.1
  49 #endif                          /* FEC_ENET */
  50
  51 #define CONFIG_HOSTNAME         "M53017"
  52 #define CONFIG_EXTRA_ENV_SETTINGS               \
  53         "netdev=eth0\0"                         \
  54         "loadaddr=40010000\0"                   \
  55         "u-boot=u-boot.bin\0"                   \
  56         "load=tftp ${loadaddr) ${u-boot}\0"     \
  57         "upd=run load; run prog\0"              \
  58         "prog=prot off 0 3ffff;"                \
  59         "era 0 3ffff;"                          \
  60         "cp.b ${loadaddr} 0 ${filesize};"       \
  61         "save\0"                                \
  62         ""
  63
  64 #define CONFIG_PRAM             512     /* 512 KB */
  65
  66 #define CONFIG_SYS_CLK          80000000
  67 #define CONFIG_SYS_CPU_CLK      CONFIG_SYS_CLK * 3
  68
  69 #define CONFIG_SYS_MBAR         0xFC000000
  70
  71 /*
  72  * Low Level Configuration Settings
  73  * (address mappings, register initial values, etc.)
  74  * You should know what you are doing if you make changes here.
  75  */
  76 /*
  77  * Definitions for initial stack pointer and data area (in DPRAM)
  78  */
  79 #define CONFIG_SYS_INIT_RAM_ADDR        0x80000000
  80 #define CONFIG_SYS_INIT_RAM_SIZE                0x20000 /* Size of used area in internal SRAM */
  81 #define CONFIG_SYS_INIT_RAM_CTRL        0x221
  82
  83 /*
  84  * Start addresses for the final memory configuration
  85  * (Set up by the startup code)
  86  * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  87  */
  88 #define CONFIG_SYS_SDRAM_BASE           0x40000000
  89 #define CONFIG_SYS_SDRAM_SIZE           64      /* SDRAM size in MB */
  90 #define CONFIG_SYS_SDRAM_CFG1           0x43711630
  91 #define CONFIG_SYS_SDRAM_CFG2           0x56670000
  92 #define CONFIG_SYS_SDRAM_CTRL           0xE1092000
  93 #define CONFIG_SYS_SDRAM_EMOD           0x80010000
  94 #define CONFIG_SYS_SDRAM_MODE           0x00CD0000
  95
  96 #define CONFIG_SYS_MONITOR_LEN          (256 << 10)     /* Reserve 256 kB for Monitor */
  97
  98 /*
  99  * For booting Linux, the board info and command line data
 100  * have to be in the first 8 MB of memory, since this is
 101  * the maximum mapped by the Linux kernel during initialization ??
 102  */
 103 #define CONFIG_SYS_BOOTMAPSZ            (CONFIG_SYS_SDRAM_BASE + (CONFIG_SYS_SDRAM_SIZE << 20))
 104 #define CONFIG_SYS_BOOTM_LEN            (CONFIG_SYS_SDRAM_SIZE << 20)
 105
 106 /*-----------------------------------------------------------------------
 107  * FLASH organization
 108  */
 109 #ifdef CONFIG_SYS_FLASH_CFI
 110 #       define CONFIG_FLASH_SPANSION_S29WS_N    1
 111 #       define CONFIG_SYS_FLASH_SIZE            0x1000000       /* Max size that the board might have */
 112 #       define CONFIG_SYS_MAX_FLASH_SECT        137     /* max number of sectors on one chip */
 113 #endif
 114
 115 #define CONFIG_SYS_FLASH_BASE           CONFIG_SYS_CS0_BASE
 116
 117 /* Configuration for environment
 118  * Environment is embedded in u-boot in the second sector of the flash
 119  */
 120
 121 #define LDS_BOARD_TEXT \
 122         . = DEFINED(env_offset) ? env_offset : .; \
 123         env/embedded.o(.text*)
 124
 125 /*-----------------------------------------------------------------------
 126  * Cache Configuration
 127  */
 128
 129 #define ICACHE_STATUS                   (CONFIG_SYS_INIT_RAM_ADDR + \
 130                                          CONFIG_SYS_INIT_RAM_SIZE - 8)
 131 #define DCACHE_STATUS                   (CONFIG_SYS_INIT_RAM_ADDR + \
 132                                          CONFIG_SYS_INIT_RAM_SIZE - 4)
 133 #define CONFIG_SYS_ICACHE_INV           (CF_CACR_CINVA)
 134 #define CONFIG_SYS_CACHE_ACR0           (CONFIG_SYS_SDRAM_BASE | \
 135                                          CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \
 136                                          CF_ACR_EN | CF_ACR_SM_ALL)
 137 #define CONFIG_SYS_CACHE_ICACR          (CF_CACR_EC | CF_CACR_CINVA | \
 138                                          CF_CACR_DCM_P)
 139
 140 /*-----------------------------------------------------------------------
 141  * Chipselect bank definitions
 142  */
 143 /*
 144  * CS0 - NOR Flash
 145  * CS1 - Ext SRAM
 146  * CS2 - Available
 147  * CS3 - Available
 148  * CS4 - Available
 149  * CS5 - Available
 150  */
 151 #define CONFIG_SYS_CS0_BASE             0
 152 #define CONFIG_SYS_CS0_MASK             0x00FF0001
 153 #define CONFIG_SYS_CS0_CTRL             0x00001FA0
 154
 155 #define CONFIG_SYS_CS1_BASE             0xC0000000
 156 #define CONFIG_SYS_CS1_MASK             0x00070001
 157 #define CONFIG_SYS_CS1_CTRL             0x00001FA0
 158
 159 #endif                          /* _M53017EVB_H */