include/configs/M53017EVB.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Configuation settings for the Freescale MCF53017EVB.
   4  *
   5  * Copyright (C) 2004-2008 Freescale Semiconductor, Inc.
   6  * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
   7  */
   8
   9 /*
  10  * board/config.h - configuration options, board specific
  11  */
  12
  13 #ifndef _M53017EVB_H
  14 #define _M53017EVB_H
  15
  16 /*
  17  * High Level Configuration Options
  18  * (easy to change)
  19  */
  20
  21 #define CFG_SYS_UART_PORT               (0)
  22
  23 #ifdef CONFIG_MCFFEC
  24 #       define CFG_SYS_TX_ETH_BUFFER    8
  25 #       define CFG_SYS_FEC_BUF_USE_SRAM
  26 #endif
  27
  28 #define CFG_SYS_RTC_CNT         (0x8000)
  29 #define CFG_SYS_RTC_SETUP               (RTC_OCEN_OSCBYP | RTC_OCEN_CLKEN)
  30
  31 /* I2C */
  32
  33 #define CFG_EXTRA_ENV_SETTINGS          \
  34         "netdev=eth0\0"                         \
  35         "loadaddr=40010000\0"                   \
  36         "u-boot=u-boot.bin\0"                   \
  37         "load=tftp ${loadaddr) ${u-boot}\0"     \
  38         "upd=run load; run prog\0"              \
  39         "prog=prot off 0 3ffff;"                \
  40         "era 0 3ffff;"                          \
  41         "cp.b ${loadaddr} 0 ${filesize};"       \
  42         "save\0"                                \
  43         ""
  44
  45 #define CFG_PRAM                512     /* 512 KB */
  46
  47 #define CFG_SYS_CLK             80000000
  48 #define CFG_SYS_CPU_CLK CFG_SYS_CLK * 3
  49
  50 #define CFG_SYS_MBAR            0xFC000000
  51
  52 /*
  53  * Low Level Configuration Settings
  54  * (address mappings, register initial values, etc.)
  55  * You should know what you are doing if you make changes here.
  56  */
  57 /*
  58  * Definitions for initial stack pointer and data area (in DPRAM)
  59  */
  60 #define CFG_SYS_INIT_RAM_ADDR   0x80000000
  61 #define CFG_SYS_INIT_RAM_SIZE           0x20000 /* Size of used area in internal SRAM */
  62 #define CFG_SYS_INIT_RAM_CTRL   0x221
  63
  64 /*
  65  * Start addresses for the final memory configuration
  66  * (Set up by the startup code)
  67  * Please note that CFG_SYS_SDRAM_BASE _must_ start at 0
  68  */
  69 #define CFG_SYS_SDRAM_BASE              0x40000000
  70 #define CFG_SYS_SDRAM_SIZE              64      /* SDRAM size in MB */
  71 #define CFG_SYS_SDRAM_CFG1              0x43711630
  72 #define CFG_SYS_SDRAM_CFG2              0x56670000
  73 #define CFG_SYS_SDRAM_CTRL              0xE1092000
  74 #define CFG_SYS_SDRAM_EMOD              0x80010000
  75 #define CFG_SYS_SDRAM_MODE              0x00CD0000
  76
  77 /*
  78  * For booting Linux, the board info and command line data
  79  * have to be in the first 8 MB of memory, since this is
  80  * the maximum mapped by the Linux kernel during initialization ??
  81  */
  82 #define CFG_SYS_BOOTMAPSZ               (CFG_SYS_SDRAM_BASE + (CFG_SYS_SDRAM_SIZE << 20))
  83
  84 /*-----------------------------------------------------------------------
  85  * FLASH organization
  86  */
  87 #ifdef CONFIG_SYS_FLASH_CFI
  88 #       define CFG_SYS_FLASH_SIZE               0x1000000       /* Max size that the board might have */
  89 #endif
  90
  91 #define CFG_SYS_FLASH_BASE              CFG_SYS_CS0_BASE
  92
  93 /* Configuration for environment
  94  * Environment is embedded in u-boot in the second sector of the flash
  95  */
  96
  97 #define LDS_BOARD_TEXT \
  98         . = DEFINED(env_offset) ? env_offset : .; \
  99         env/embedded.o(.text*)
 100
 101 /*-----------------------------------------------------------------------
 102  * Cache Configuration
 103  */
 104
 105 #define ICACHE_STATUS                   (CFG_SYS_INIT_RAM_ADDR + \
 106                                          CFG_SYS_INIT_RAM_SIZE - 8)
 107 #define DCACHE_STATUS                   (CFG_SYS_INIT_RAM_ADDR + \
 108                                          CFG_SYS_INIT_RAM_SIZE - 4)
 109 #define CFG_SYS_ICACHE_INV              (CF_CACR_CINVA)
 110 #define CFG_SYS_CACHE_ACR0              (CFG_SYS_SDRAM_BASE | \
 111                                          CF_ADDRMASK(CFG_SYS_SDRAM_SIZE) | \
 112                                          CF_ACR_EN | CF_ACR_SM_ALL)
 113 #define CFG_SYS_CACHE_ICACR             (CF_CACR_EC | CF_CACR_CINVA | \
 114                                          CF_CACR_DCM_P)
 115
 116 /*-----------------------------------------------------------------------
 117  * Chipselect bank definitions
 118  */
 119 /*
 120  * CS0 - NOR Flash
 121  * CS1 - Ext SRAM
 122  * CS2 - Available
 123  * CS3 - Available
 124  * CS4 - Available
 125  * CS5 - Available
 126  */
 127 #define CFG_SYS_CS0_BASE                0
 128 #define CFG_SYS_CS0_MASK                0x00FF0001
 129 #define CFG_SYS_CS0_CTRL                0x00001FA0
 130
 131 #define CFG_SYS_CS1_BASE                0xC0000000
 132 #define CFG_SYS_CS1_MASK                0x00070001
 133 #define CFG_SYS_CS1_CTRL                0x00001FA0
 134
 135 #define CFG_MCFTMR
 136
 137 #endif                          /* _M53017EVB_H */