include/configs/M5282EVB.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Configuation settings for the Motorola MC5282EVB board.
   4  *
   5  * (C) Copyright 2003 Josef Baumgartner <josef.baumgartner@telex.de>
   6  */
   7
   8 /*
   9  * board/config.h - configuration options, board specific
  10  */
  11
  12 #ifndef _CONFIG_M5282EVB_H
  13 #define _CONFIG_M5282EVB_H
  14
  15 /*
  16  * High Level Configuration Options
  17  * (easy to change)
  18  */
  19 #define CONFIG_MCFTMR
  20
  21 #define CONFIG_MCFUART
  22 #define CONFIG_SYS_UART_PORT            (0)
  23
  24 #undef  CONFIG_MONITOR_IS_IN_RAM        /* define if monitor is started from a pre-loader */
  25
  26 /* Configuration for environment
  27  * Environment is embedded in u-boot in the second sector of the flash
  28  */
  29 #define CONFIG_ENV_ADDR         0xffe04000
  30 #define CONFIG_ENV_SIZE         0x2000
  31
  32 #define LDS_BOARD_TEXT \
  33         . = DEFINED(env_offset) ? env_offset : .; \
  34         env/embedded.o(.text*);
  35
  36 /*
  37  * BOOTP options
  38  */
  39 #define CONFIG_BOOTP_BOOTFILESIZE
  40
  41 /*
  42  * Command line configuration.
  43  */
  44
  45 #define CONFIG_MCFFEC
  46 #ifdef CONFIG_MCFFEC
  47 #       define CONFIG_MII_INIT          1
  48 #       define CONFIG_SYS_DISCOVER_PHY
  49 #       define CONFIG_SYS_RX_ETH_BUFFER 8
  50 #       define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
  51
  52 #       define CONFIG_SYS_FEC0_PINMUX           0
  53 #       define CONFIG_SYS_FEC0_MIIBASE          CONFIG_SYS_FEC0_IOBASE
  54 #       define MCFFEC_TOUT_LOOP         50000
  55 /* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */
  56 #       ifndef CONFIG_SYS_DISCOVER_PHY
  57 #               define FECDUPLEX        FULL
  58 #               define FECSPEED         _100BASET
  59 #       else
  60 #               ifndef CONFIG_SYS_FAULT_ECHO_LINK_DOWN
  61 #                       define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
  62 #               endif
  63 #       endif                   /* CONFIG_SYS_DISCOVER_PHY */
  64 #endif
  65
  66 #ifdef CONFIG_MCFFEC
  67 #       define CONFIG_IPADDR    192.162.1.2
  68 #       define CONFIG_NETMASK   255.255.255.0
  69 #       define CONFIG_SERVERIP  192.162.1.1
  70 #       define CONFIG_GATEWAYIP 192.162.1.1
  71 #endif                          /* CONFIG_MCFFEC */
  72
  73 #define CONFIG_HOSTNAME         "M5282EVB"
  74 #define CONFIG_EXTRA_ENV_SETTINGS               \
  75         "netdev=eth0\0"                         \
  76         "loadaddr=10000\0"                      \
  77         "u-boot=u-boot.bin\0"                   \
  78         "load=tftp ${loadaddr) ${u-boot}\0"     \
  79         "upd=run load; run prog\0"              \
  80         "prog=prot off ffe00000 ffe3ffff;"      \
  81         "era ffe00000 ffe3ffff;"                \
  82         "cp.b ${loadaddr} ffe00000 ${filesize};"\
  83         "save\0"                                \
  84         ""
  85
  86 #define CONFIG_SYS_LOAD_ADDR            0x20000
  87
  88 #define CONFIG_SYS_MEMTEST_START        0x400
  89 #define CONFIG_SYS_MEMTEST_END          0x380000
  90
  91 #define CONFIG_SYS_CLK                  64000000
  92
  93 /* PLL Configuration: Ext Clock * 6 (see table 9-4 of MCF user manual) */
  94
  95 #define CONFIG_SYS_MFD                  0x02    /* PLL Multiplication Factor Devider */
  96 #define CONFIG_SYS_RFD                  0x00    /* PLL Reduce Frecuency Devider */
  97
  98 /*
  99  * Low Level Configuration Settings
 100  * (address mappings, register initial values, etc.)
 101  * You should know what you are doing if you make changes here.
 102  */
 103 #define CONFIG_SYS_MBAR         0x40000000
 104
 105 /*-----------------------------------------------------------------------
 106  * Definitions for initial stack pointer and data area (in DPRAM)
 107  */
 108 #define CONFIG_SYS_INIT_RAM_ADDR        0x20000000
 109 #define CONFIG_SYS_INIT_RAM_SIZE        0x10000 /* Size of used area in internal SRAM    */
 110 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 111 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 112
 113 /*-----------------------------------------------------------------------
 114  * Start addresses for the final memory configuration
 115  * (Set up by the startup code)
 116  * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
 117  */
 118 #define CONFIG_SYS_SDRAM_BASE           0x00000000
 119 #define CONFIG_SYS_SDRAM_SIZE           16      /* SDRAM size in MB */
 120 #define CONFIG_SYS_FLASH_BASE           CONFIG_SYS_CS0_BASE
 121 #define CONFIG_SYS_INT_FLASH_BASE       0xf0000000
 122 #define CONFIG_SYS_INT_FLASH_ENABLE     0x21
 123
 124 /* If M5282 port is fully implemented the monitor base will be behind
 125  * the vector table. */
 126 #if (CONFIG_SYS_TEXT_BASE != CONFIG_SYS_INT_FLASH_BASE)
 127 #define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE + 0x400)
 128 #else
 129 #define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_TEXT_BASE + 0x418)  /* 24 Byte for CFM-Config */
 130 #endif
 131
 132 #define CONFIG_SYS_MONITOR_LEN          0x20000
 133 #define CONFIG_SYS_MALLOC_LEN           (256 << 10)
 134 #define CONFIG_SYS_BOOTPARAMS_LEN       64*1024
 135
 136 /*
 137  * For booting Linux, the board info and command line data
 138  * have to be in the first 8 MB of memory, since this is
 139  * the maximum mapped by the Linux kernel during initialization ??
 140  */
 141 #define CONFIG_SYS_BOOTMAPSZ            (CONFIG_SYS_SDRAM_BASE + (CONFIG_SYS_SDRAM_SIZE << 20))
 142
 143 /*-----------------------------------------------------------------------
 144  * FLASH organization
 145  */
 146 #ifdef CONFIG_SYS_FLASH_CFI
 147
 148 #       define CONFIG_SYS_FLASH_SIZE            0x1000000       /* Max size that the board might have */
 149 #       define CONFIG_SYS_FLASH_CFI_WIDTH       FLASH_CFI_16BIT
 150 #       define CONFIG_SYS_MAX_FLASH_BANKS       1       /* max number of memory banks */
 151 #       define CONFIG_SYS_MAX_FLASH_SECT        137     /* max number of sectors on one chip */
 152 #       define CONFIG_SYS_FLASH_CHECKSUM
 153 #       define CONFIG_SYS_FLASH_BANKS_LIST      { CONFIG_SYS_FLASH_BASE }
 154 #endif
 155
 156 /*-----------------------------------------------------------------------
 157  * Cache Configuration
 158  */
 159 #define CONFIG_SYS_CACHELINE_SIZE       16
 160
 161 #define ICACHE_STATUS                   (CONFIG_SYS_INIT_RAM_ADDR + \
 162                                          CONFIG_SYS_INIT_RAM_SIZE - 8)
 163 #define DCACHE_STATUS                   (CONFIG_SYS_INIT_RAM_ADDR + \
 164                                          CONFIG_SYS_INIT_RAM_SIZE - 4)
 165 #define CONFIG_SYS_ICACHE_INV           (CF_CACR_CINV + CF_CACR_DCM)
 166 #define CONFIG_SYS_CACHE_ACR0           (CONFIG_SYS_SDRAM_BASE | \
 167                                          CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \
 168                                          CF_ACR_EN | CF_ACR_SM_ALL)
 169 #define CONFIG_SYS_CACHE_ICACR          (CF_CACR_CENB | CF_CACR_DISD | \
 170                                          CF_CACR_CEIB | CF_CACR_DBWE | \
 171                                          CF_CACR_EUSP)
 172
 173 /*-----------------------------------------------------------------------
 174  * Memory bank definitions
 175  */
 176 #define CONFIG_SYS_CS0_BASE             0xFFE00000
 177 #define CONFIG_SYS_CS0_CTRL             0x00001980
 178 #define CONFIG_SYS_CS0_MASK             0x001F0001
 179
 180 /*-----------------------------------------------------------------------
 181  * Port configuration
 182  */
 183 #define CONFIG_SYS_PACNT                0x0000000       /* Port A D[31:24] */
 184 #define CONFIG_SYS_PADDR                0x0000000
 185 #define CONFIG_SYS_PADAT                0x0000000
 186
 187 #define CONFIG_SYS_PBCNT                0x0000000       /* Port B D[23:16] */
 188 #define CONFIG_SYS_PBDDR                0x0000000
 189 #define CONFIG_SYS_PBDAT                0x0000000
 190
 191 #define CONFIG_SYS_PCCNT                0x0000000       /* Port C D[15:08] */
 192 #define CONFIG_SYS_PCDDR                0x0000000
 193 #define CONFIG_SYS_PCDAT                0x0000000
 194
 195 #define CONFIG_SYS_PDCNT                0x0000000       /* Port D D[07:00] */
 196 #define CONFIG_SYS_PCDDR                0x0000000
 197 #define CONFIG_SYS_PCDAT                0x0000000
 198
 199 #define CONFIG_SYS_PEHLPAR              0xC0
 200 #define CONFIG_SYS_PUAPAR               0x0F    /* UA0..UA3 = Uart 0 +1 */
 201 #define CONFIG_SYS_DDRUA                0x05
 202 #define CONFIG_SYS_PJPAR                0xFF
 203
 204 #endif                          /* _CONFIG_M5282EVB_H */