include/configs/M5275EVB.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Configuation settings for the Motorola MC5275EVB board.
   4  *
   5  * By Arthur Shipkowski <art@videon-central.com>
   6  * Copyright (C) 2005 Videon Central, Inc.
   7  *
   8  * Based off of M5272C3 board code by Josef Baumgartner
   9  * <josef.baumgartner@telex.de>
  10  */
  11
  12 /*
  13  * board/config.h - configuration options, board specific
  14  */
  15
  16 #ifndef _M5275EVB_H
  17 #define _M5275EVB_H
  18
  19 /*
  20  * High Level Configuration Options
  21  * (easy to change)
  22  */
  23
  24 #define CONFIG_MCFTMR
  25
  26 #define CONFIG_SYS_UART_PORT            (0)
  27
  28 /* Configuration for environment
  29  * Environment is embedded in u-boot in the second sector of the flash
  30  */
  31
  32 #define LDS_BOARD_TEXT \
  33         . = DEFINED(env_offset) ? env_offset : .; \
  34         env/embedded.o(.text);
  35
  36 /*
  37  * BOOTP options
  38  */
  39 #define CONFIG_BOOTP_BOOTFILESIZE
  40
  41 /* Available command configuration */
  42
  43 #ifdef CONFIG_MCFFEC
  44 #define CONFIG_MII_INIT         1
  45 #define CONFIG_SYS_DISCOVER_PHY
  46 #define CONFIG_SYS_RX_ETH_BUFFER        8
  47 #define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
  48 #define CONFIG_HAS_ETH1
  49 /* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */
  50 #ifndef CONFIG_SYS_DISCOVER_PHY
  51 #define FECDUPLEX               FULL
  52 #define FECSPEED                _100BASET
  53 #else
  54 #ifndef CONFIG_SYS_FAULT_ECHO_LINK_DOWN
  55 #define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
  56 #endif
  57 #endif
  58 #endif
  59
  60 /* I2C */
  61 #define CONFIG_SYS_I2C_PINMUX_REG       (gpio_reg->par_feci2c)
  62 #define CONFIG_SYS_I2C_PINMUX_CLR       (0xFFF0)
  63 #define CONFIG_SYS_I2C_PINMUX_SET       (0x000F)
  64
  65 #ifdef CONFIG_MCFFEC
  66 #       define CONFIG_NET_RETRY_COUNT   5
  67 #       define CONFIG_OVERWRITE_ETHADDR_ONCE
  68 #endif                          /* FEC_ENET */
  69
  70 #define CONFIG_EXTRA_ENV_SETTINGS               \
  71         "netdev=eth0\0"                         \
  72         "loadaddr=10000\0"                      \
  73         "uboot=u-boot.bin\0"                    \
  74         "load=tftp ${loadaddr} ${uboot}\0"      \
  75         "upd=run load; run prog\0"              \
  76         "prog=prot off ffe00000 ffe3ffff;"      \
  77         "era ffe00000 ffe3ffff;"                \
  78         "cp.b ${loadaddr} ffe00000 ${filesize};"\
  79         "save\0"                                \
  80         ""
  81
  82 #define CONFIG_SYS_CLK                  150000000
  83
  84 /*
  85  * Low Level Configuration Settings
  86  * (address mappings, register initial values, etc.)
  87  * You should know what you are doing if you make changes here.
  88  */
  89
  90 #define CONFIG_SYS_MBAR         0x40000000
  91
  92 /*-----------------------------------------------------------------------
  93  * Definitions for initial stack pointer and data area (in DPRAM)
  94  */
  95 #define CONFIG_SYS_INIT_RAM_ADDR        0x20000000
  96 #define CONFIG_SYS_INIT_RAM_SIZE        0x10000 /* Size of used area in internal SRAM */
  97 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
  98 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
  99
 100 /*-----------------------------------------------------------------------
 101  * Start addresses for the final memory configuration
 102  * (Set up by the startup code)
 103  * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
 104  */
 105 #define CONFIG_SYS_SDRAM_BASE           0x00000000
 106 #define CONFIG_SYS_SDRAM_SIZE           16      /* SDRAM size in MB */
 107 #define CONFIG_SYS_FLASH_BASE           CONFIG_SYS_CS0_BASE
 108
 109 #ifdef CONFIG_MONITOR_IS_IN_RAM
 110 #define CONFIG_SYS_MONITOR_BASE 0x20000
 111 #else
 112 #define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE + 0x400)
 113 #endif
 114
 115 #define CONFIG_SYS_MONITOR_LEN          0x20000
 116 #define CONFIG_SYS_BOOTPARAMS_LEN       64*1024
 117
 118 /*
 119  * For booting Linux, the board info and command line data
 120  * have to be in the first 8 MB of memory, since this is
 121  * the maximum mapped by the Linux kernel during initialization ??
 122  */
 123 #define CONFIG_SYS_BOOTMAPSZ            (CONFIG_SYS_SDRAM_BASE + (CONFIG_SYS_SDRAM_SIZE << 20))
 124 #define CONFIG_SYS_BOOTM_LEN            (CONFIG_SYS_SDRAM_SIZE << 20)
 125
 126 /*-----------------------------------------------------------------------
 127  * FLASH organization
 128  */
 129 #define CONFIG_SYS_MAX_FLASH_BANKS      1       /* max number of memory banks */
 130 #define CONFIG_SYS_MAX_FLASH_SECT       11      /* max number of sectors on one chip */
 131 #define CONFIG_SYS_FLASH_ERASE_TOUT     1000
 132
 133 #define CONFIG_SYS_FLASH_SIZE           0x200000
 134
 135 /*-----------------------------------------------------------------------
 136  * Cache Configuration
 137  */
 138
 139 #define ICACHE_STATUS                   (CONFIG_SYS_INIT_RAM_ADDR + \
 140                                          CONFIG_SYS_INIT_RAM_SIZE - 8)
 141 #define DCACHE_STATUS                   (CONFIG_SYS_INIT_RAM_ADDR + \
 142                                          CONFIG_SYS_INIT_RAM_SIZE - 4)
 143 #define CONFIG_SYS_ICACHE_INV           (CF_CACR_CINV | CF_CACR_INVI)
 144 #define CONFIG_SYS_CACHE_ACR0           (CONFIG_SYS_SDRAM_BASE | \
 145                                          CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \
 146                                          CF_ACR_EN | CF_ACR_SM_ALL)
 147 #define CONFIG_SYS_CACHE_ICACR          (CF_CACR_CENB | CF_CACR_CINV | \
 148                                          CF_CACR_DISD | CF_CACR_INVI | \
 149                                          CF_CACR_CEIB | CF_CACR_DCM | \
 150                                          CF_CACR_EUSP)
 151
 152 /*-----------------------------------------------------------------------
 153  * Memory bank definitions
 154  */
 155 #define CONFIG_SYS_CS0_BASE             0xffe00000
 156 #define CONFIG_SYS_CS0_CTRL             0x00001980
 157 #define CONFIG_SYS_CS0_MASK             0x001F0001
 158
 159 #define CONFIG_SYS_CS1_BASE             0x30000000
 160 #define CONFIG_SYS_CS1_CTRL             0x00001900
 161 #define CONFIG_SYS_CS1_MASK             0x00070001
 162
 163 /*-----------------------------------------------------------------------
 164  * Port configuration
 165  */
 166 #define CONFIG_SYS_FECI2C               0x0FA0
 167
 168 #endif  /* _M5275EVB_H */