2 * Configuation settings for the Freescale MCF52277 EVB board.
4 * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
5 * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
7 * See file CREDITS for list of people who contributed to this
10 * This program is free software; you can redistribute it and/or
11 * modify it under the terms of the GNU General Public License as
12 * published by the Free Software Foundation; either version 2 of
13 * the License, or (at your option) any later version.
15 * This program is distributed in the hope that it will be useful,
16 * but WITHOUT ANY WARRANTY; without even the implied warranty of
17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
18 * GNU General Public License for more details.
20 * You should have received a copy of the GNU General Public License
21 * along with this program; if not, write to the Free Software
22 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
27 * board/config.h - configuration options, board specific
34 * High Level Configuration Options
37 #define CONFIG_MCF5227x /* define processor family */
38 #define CONFIG_M52277 /* define processor type */
39 #define CONFIG_M52277EVB /* M52277EVB board */
43 #define CONFIG_MCFUART
44 #define CFG_UART_PORT (0)
45 #define CONFIG_BAUDRATE 115200
46 #define CFG_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 }
48 #undef CONFIG_WATCHDOG
50 #define CONFIG_TIMESTAMP /* Print image info with timestamp */
55 #define CONFIG_BOOTP_BOOTFILESIZE
56 #define CONFIG_BOOTP_BOOTPATH
57 #define CONFIG_BOOTP_GATEWAY
58 #define CONFIG_BOOTP_HOSTNAME
60 /* Command line configuration */
61 #include <config_cmd_default.h>
63 #define CONFIG_CMD_CACHE
64 #define CONFIG_CMD_DATE
65 #define CONFIG_CMD_ELF
66 #define CONFIG_CMD_FLASH
67 #define CONFIG_CMD_I2C
68 #define CONFIG_CMD_JFFS2
69 #define CONFIG_CMD_LOADB
70 #define CONFIG_CMD_LOADS
71 #define CONFIG_CMD_MEMORY
72 #define CONFIG_CMD_MISC
74 #define CONFIG_CMD_REGINFO
78 #define CONFIG_HOSTNAME M52277EVB
79 #define CONFIG_EXTRA_ENV_SETTINGS \
80 "inpclk=" MK_STR(CFG_INPUT_CLKSRC) "\0" \
81 "loadaddr=" MK_STR(CFG_LOAD_ADDR) "\0" \
82 "u-boot=u-boot.bin\0" \
83 "load=tftp ${loadaddr) ${u-boot}\0" \
84 "upd=run load; run prog\0" \
85 "prog=prot off 0 0x3ffff;" \
87 "cp.b ${loadaddr} 0 ${filesize};" \
94 #define CONFIG_SPLASH_SCREEN
95 #define CONFIG_LCD_LOGO
96 #define CONFIG_SHARP_LQ035Q7DH06
100 #ifdef CONFIG_CMD_USB
101 #define CONFIG_USB_EHCI
102 #define CONFIG_USB_STORAGE
103 #define CONFIG_DOS_PARTITION
104 #define CONFIG_MAC_PARTITION
105 #define CONFIG_ISO_PARTITION
106 #define CFG_USB_EHCI_REGS_BASE 0xFC0B0000
107 #define CFG_USB_EHCI_CPU_INIT
111 #define CONFIG_MCFRTC
113 #define CFG_RTC_OSCILLATOR (32 * CFG_HZ)
116 #define CONFIG_MCFTMR
120 #define CONFIG_FSL_I2C
121 #define CONFIG_HARD_I2C /* I2C with hardware support */
122 #undef CONFIG_SOFT_I2C /* I2C bit-banged */
123 #define CFG_I2C_SPEED 80000 /* I2C speed and slave address */
124 #define CFG_I2C_SLAVE 0x7F
125 #define CFG_I2C_OFFSET 0x58000
126 #define CFG_IMMR CFG_MBAR
128 /* Input, PCI, Flexbus, and VCO */
129 #define CONFIG_EXTRA_CLOCK
131 #define CFG_INPUT_CLKSRC 16000000
133 #define CONFIG_PRAM 512 /* 512 KB */
135 #define CFG_PROMPT "-> "
136 #define CFG_LONGHELP /* undef to save memory */
138 #if defined(CONFIG_CMD_KGDB)
139 #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
141 #define CFG_CBSIZE 256 /* Console I/O Buffer Size */
143 #define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
144 #define CFG_MAXARGS 16 /* max number of command args */
145 #define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
147 #define CFG_LOAD_ADDR (CFG_SDRAM_BASE + 0x10000)
151 #define CFG_MBAR 0xFC000000
154 * Low Level Configuration Settings
155 * (address mappings, register initial values, etc.)
156 * You should know what you are doing if you make changes here.
159 /*-----------------------------------------------------------------------
160 * Definitions for initial stack pointer and data area (in DPRAM)
162 #define CFG_INIT_RAM_ADDR 0x80000000
163 #define CFG_INIT_RAM_END 0x8000 /* End of used area in internal SRAM */
164 #define CFG_INIT_RAM_CTRL 0x21
165 #define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
166 #define CFG_GBL_DATA_OFFSET ((CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) - 16)
167 #define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
169 /*-----------------------------------------------------------------------
170 * Start addresses for the final memory configuration
171 * (Set up by the startup code)
172 * Please note that CFG_SDRAM_BASE _must_ start at 0
174 #define CFG_SDRAM_BASE 0x40000000
175 #define CFG_SDRAM_SIZE 64 /* SDRAM size in MB */
176 #define CFG_SDRAM_CFG1 0x43711630
177 #define CFG_SDRAM_CFG2 0x56670000
178 #define CFG_SDRAM_CTRL 0xE1092000
179 #define CFG_SDRAM_EMOD 0x81810000
180 #define CFG_SDRAM_MODE 0x00CD0000
182 #define CFG_MEMTEST_START CFG_SDRAM_BASE + 0x400
183 #define CFG_MEMTEST_END ((CFG_SDRAM_SIZE - 3) << 20)
185 #define CFG_MONITOR_BASE (CFG_FLASH_BASE + 0x400)
186 #define CFG_BOOTPARAMS_LEN 64*1024
187 #define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
188 #define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
190 /* Initial Memory map for Linux */
191 #define CFG_BOOTMAPSZ (CFG_SDRAM_BASE + (CFG_SDRAM_SIZE << 20))
193 /* Configuration for environment
194 * Environment is embedded in u-boot in the second sector of the flash
196 #define CFG_ENV_IS_IN_FLASH 1
197 #define CONFIG_ENV_OVERWRITE 1
198 #undef CFG_ENV_IS_EMBEDDED
200 /*-----------------------------------------------------------------------
203 #define CFG_FLASH_BASE CFG_CS0_BASE
204 #define CFG_FLASH0_BASE CFG_CS0_BASE
205 #define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x8000)
206 #define CFG_ENV_SECT_SIZE 0x8000
208 #define CFG_FLASH_CFI
211 # define CFG_FLASH_CFI_DRIVER 1
212 # define CFG_FLASH_SIZE 0x1000000 /* Max size that the board might have */
213 # define CFG_FLASH_CFI_WIDTH FLASH_CFI_16BIT
214 # define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
215 # define CFG_MAX_FLASH_SECT 137 /* max number of sectors on one chip */
216 # define CFG_FLASH_PROTECTION /* "Real" (hardware) sectors protection */
217 # define CFG_FLASH_CHECKSUM
221 * This is setting for JFFS2 support in u-boot.
222 * NOTE: Enable CONFIG_CMD_JFFS2 for JFFS2 support.
224 #ifdef CONFIG_CMD_JFFS2
225 # define CONFIG_JFFS2_DEV "nor0"
226 # define CONFIG_JFFS2_PART_SIZE (0x01000000 - 0x40000)
227 # define CONFIG_JFFS2_PART_OFFSET (CFG_FLASH0_BASE + 0x40000)
230 /*-----------------------------------------------------------------------
231 * Cache Configuration
233 #define CFG_CACHELINE_SIZE 16
235 /*-----------------------------------------------------------------------
236 * Memory bank definitions
247 #define CFG_CS0_BASE 0x00000000
248 #define CFG_CS0_MASK 0x00FF0001
249 #define CFG_CS0_CTRL 0x00001FA0
251 #endif /* _M52277EVB_H */