include/configs/M52277EVB.h

   1 /*
   2  * Configuation settings for the Freescale MCF52277 EVB board.
   3  *
   4  * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
   5  * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
   6  *
   7  * SPDX-License-Identifier:     GPL-2.0+
   8  */
   9
  10 /*
  11  * board/config.h - configuration options, board specific
  12  */
  13
  14 #ifndef _M52277EVB_H
  15 #define _M52277EVB_H
  16
  17 /*
  18  * High Level Configuration Options
  19  * (easy to change)
  20  */
  21 #define CONFIG_M52277EVB        /* M52277EVB board */
  22
  23 #define CONFIG_MCFUART
  24 #define CONFIG_SYS_UART_PORT            (0)
  25
  26 #undef CONFIG_WATCHDOG
  27
  28 #define CONFIG_TIMESTAMP        /* Print image info with timestamp */
  29
  30 /*
  31  * BOOTP options
  32  */
  33 #define CONFIG_BOOTP_BOOTFILESIZE
  34 #define CONFIG_BOOTP_BOOTPATH
  35 #define CONFIG_BOOTP_GATEWAY
  36 #define CONFIG_BOOTP_HOSTNAME
  37
  38 /* Command line configuration */
  39 #define CONFIG_CMD_JFFS2
  40 #define CONFIG_CMD_REGINFO
  41
  42 #define CONFIG_HOSTNAME                 M52277EVB
  43 #define CONFIG_SYS_UBOOT_END            0x3FFFF
  44 #define CONFIG_SYS_LOAD_ADDR2           0x40010007
  45 #ifdef CONFIG_SYS_STMICRO_BOOT
  46 /* ST Micro serial flash */
  47 #define CONFIG_EXTRA_ENV_SETTINGS               \
  48         "inpclk=" __stringify(CONFIG_SYS_INPUT_CLKSRC) "\0"     \
  49         "loadaddr=0x40010000\0"                 \
  50         "uboot=u-boot.bin\0"                    \
  51         "load=loadb ${loadaddr} ${baudrate};"   \
  52         "loadb " __stringify(CONFIG_SYS_LOAD_ADDR2) " ${baudrate} \0"   \
  53         "upd=run load; run prog\0"              \
  54         "prog=sf probe 0:2 10000 1;"            \
  55         "sf erase 0 30000;"                     \
  56         "sf write ${loadaddr} 0 30000;"         \
  57         "save\0"                                \
  58         ""
  59 #endif
  60 #ifdef CONFIG_SYS_SPANSION_BOOT
  61 #define CONFIG_EXTRA_ENV_SETTINGS               \
  62         "inpclk=" __stringify(CONFIG_SYS_INPUT_CLKSRC) "\0"     \
  63         "loadaddr=0x40010000\0"                 \
  64         "uboot=u-boot.bin\0"                    \
  65         "load=loadb ${loadaddr} ${baudrate}\0"  \
  66         "upd=run load; run prog\0"              \
  67         "prog=prot off " __stringify(CONFIG_SYS_FLASH_BASE)     \
  68         " " __stringify(CONFIG_SYS_UBOOT_END) ";"               \
  69         "era " __stringify(CONFIG_SYS_FLASH_BASE) " "           \
  70         __stringify(CONFIG_SYS_UBOOT_END) ";"                   \
  71         "cp.b ${loadaddr} " __stringify(CONFIG_SYS_FLASH_BASE)  \
  72         " ${filesize}; save\0"                  \
  73         "updsbf=run loadsbf; run progsbf\0"     \
  74         "loadsbf=loadb ${loadaddr} ${baudrate};"        \
  75         "loadb " __stringify(CONFIG_SYS_LOAD_ADDR2) " ${baudrate} \0"   \
  76         "progsbf=sf probe 0:2 10000 1;"         \
  77         "sf erase 0 30000;"                     \
  78         "sf write ${loadaddr} 0 30000;"         \
  79         ""
  80 #endif
  81
  82 /* LCD */
  83 #ifdef CONFIG_CMD_BMP
  84 #define CONFIG_SPLASH_SCREEN
  85 #define CONFIG_LCD_LOGO
  86 #define CONFIG_SHARP_LQ035Q7DH06
  87 #endif
  88
  89 /* USB */
  90 #ifdef CONFIG_CMD_USB
  91 #define CONFIG_USB_EHCI
  92 #define CONFIG_SYS_USB_EHCI_REGS_BASE   0xFC0B0000
  93 #define CONFIG_SYS_USB_EHCI_CPU_INIT
  94 #endif
  95
  96 /* Realtime clock */
  97 #define CONFIG_MCFRTC
  98 #undef RTC_DEBUG
  99 #define CONFIG_SYS_RTC_OSCILLATOR       (32 * CONFIG_SYS_HZ)
 100
 101 /* Timer */
 102 #define CONFIG_MCFTMR
 103 #undef CONFIG_MCFPIT
 104
 105 /* I2c */
 106 #define CONFIG_SYS_I2C
 107 #define CONFIG_SYS_I2C_FSL
 108 #define CONFIG_SYS_FSL_I2C_SPEED        80000
 109 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 110 #define CONFIG_SYS_FSL_I2C_OFFSET       0x58000
 111 #define CONFIG_SYS_IMMR                 CONFIG_SYS_MBAR
 112
 113 /* DSPI and Serial Flash */
 114 #define CONFIG_CF_SPI
 115 #define CONFIG_CF_DSPI
 116 #define CONFIG_HARD_SPI
 117 #define CONFIG_SYS_SBFHDR_SIZE          0x7
 118 #ifdef CONFIG_CMD_SPI
 119 #       define CONFIG_SYS_DSPI_CS2
 120
 121 #       define CONFIG_SYS_DSPI_CTAR0    (DSPI_CTAR_TRSZ(7) | \
 122                                          DSPI_CTAR_PCSSCK_1CLK | \
 123                                          DSPI_CTAR_PASC(0) | \
 124                                          DSPI_CTAR_PDT(0) | \
 125                                          DSPI_CTAR_CSSCK(0) | \
 126                                          DSPI_CTAR_ASC(0) | \
 127                                          DSPI_CTAR_DT(1))
 128 #endif
 129
 130 /* Input, PCI, Flexbus, and VCO */
 131 #define CONFIG_EXTRA_CLOCK
 132
 133 #define CONFIG_SYS_INPUT_CLKSRC 16000000
 134
 135 #define CONFIG_PRAM             2048    /* 2048 KB */
 136
 137 #define CONFIG_SYS_LONGHELP             /* undef to save memory */
 138
 139 #if defined(CONFIG_CMD_KGDB)
 140 #define CONFIG_SYS_CBSIZE       1024    /* Console I/O Buffer Size */
 141 #else
 142 #define CONFIG_SYS_CBSIZE       256     /* Console I/O Buffer Size */
 143 #endif
 144 #define CONFIG_SYS_PBSIZE       (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)        /* Print Buffer Size */
 145 #define CONFIG_SYS_MAXARGS      16      /* max number of command args */
 146 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE       /* Boot Argument Buffer Size    */
 147
 148 #define CONFIG_SYS_LOAD_ADDR    (CONFIG_SYS_SDRAM_BASE + 0x10000)
 149
 150 #define CONFIG_SYS_MBAR         0xFC000000
 151
 152 /*
 153  * Low Level Configuration Settings
 154  * (address mappings, register initial values, etc.)
 155  * You should know what you are doing if you make changes here.
 156  */
 157
 158 /*
 159  * Definitions for initial stack pointer and data area (in DPRAM)
 160  */
 161 #define CONFIG_SYS_INIT_RAM_ADDR        0x80000000
 162 #define CONFIG_SYS_INIT_RAM_SIZE                0x8000  /* Size of used area in internal SRAM */
 163 #define CONFIG_SYS_INIT_RAM_CTRL        0x221
 164 #define CONFIG_SYS_GBL_DATA_OFFSET      ((CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) - 32)
 165 #define CONFIG_SYS_INIT_SP_OFFSET       (CONFIG_SYS_GBL_DATA_OFFSET - 32)
 166 #define CONFIG_SYS_SBFHDR_DATA_OFFSET   (CONFIG_SYS_INIT_RAM_SIZE - 32)
 167
 168 /*
 169  * Start addresses for the final memory configuration
 170  * (Set up by the startup code)
 171  * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
 172  */
 173 #define CONFIG_SYS_SDRAM_BASE           0x40000000
 174 #define CONFIG_SYS_SDRAM_SIZE           64      /* SDRAM size in MB */
 175 #define CONFIG_SYS_SDRAM_CFG1           0x43711630
 176 #define CONFIG_SYS_SDRAM_CFG2           0x56670000
 177 #define CONFIG_SYS_SDRAM_CTRL           0xE1092000
 178 #define CONFIG_SYS_SDRAM_EMOD           0x81810000
 179 #define CONFIG_SYS_SDRAM_MODE           0x00CD0000
 180 #define CONFIG_SYS_SDRAM_DRV_STRENGTH   0x00
 181
 182 #define CONFIG_SYS_MEMTEST_START        CONFIG_SYS_SDRAM_BASE + 0x400
 183 #define CONFIG_SYS_MEMTEST_END          ((CONFIG_SYS_SDRAM_SIZE - 3) << 20)
 184
 185 #ifdef CONFIG_CF_SBF
 186 #       define CONFIG_SYS_MONITOR_BASE  (CONFIG_SYS_TEXT_BASE + 0x400)
 187 #else
 188 #       define CONFIG_SYS_MONITOR_BASE  (CONFIG_SYS_FLASH_BASE + 0x400)
 189 #endif
 190 #define CONFIG_SYS_BOOTPARAMS_LEN       64*1024
 191 #define CONFIG_SYS_MONITOR_LEN          (256 << 10)     /* Reserve 256 kB for Monitor */
 192 #define CONFIG_SYS_MALLOC_LEN           (128 << 10)     /* Reserve 128 kB for malloc() */
 193
 194 /* Initial Memory map for Linux */
 195 #define CONFIG_SYS_BOOTMAPSZ            (CONFIG_SYS_SDRAM_BASE + (CONFIG_SYS_SDRAM_SIZE << 20))
 196 #define CONFIG_SYS_BOOTM_LEN            (CONFIG_SYS_SDRAM_SIZE << 20)
 197
 198 /*
 199  * Configuration for environment
 200  * Environment is not embedded in u-boot. First time runing may have env
 201  * crc error warning if there is no correct environment on the flash.
 202  */
 203 #ifdef CONFIG_CF_SBF
 204 #       define CONFIG_ENV_IS_IN_SPI_FLASH
 205 #       define CONFIG_ENV_SPI_CS        2
 206 #else
 207 #       define CONFIG_ENV_IS_IN_FLASH   1
 208 #endif
 209 #define CONFIG_ENV_OVERWRITE            1
 210
 211 /*-----------------------------------------------------------------------
 212  * FLASH organization
 213  */
 214 #ifdef CONFIG_SYS_STMICRO_BOOT
 215 #       define CONFIG_SYS_FLASH_BASE    CONFIG_SYS_CS0_BASE
 216 #       define CONFIG_SYS_FLASH0_BASE   CONFIG_SYS_CS0_BASE
 217 #       define CONFIG_ENV_OFFSET        0x30000
 218 #       define CONFIG_ENV_SIZE          0x1000
 219 #       define CONFIG_ENV_SECT_SIZE     0x10000
 220 #endif
 221 #ifdef CONFIG_SYS_SPANSION_BOOT
 222 #       define CONFIG_SYS_FLASH_BASE    CONFIG_SYS_CS0_BASE
 223 #       define CONFIG_SYS_FLASH0_BASE   CONFIG_SYS_CS0_BASE
 224 #       define CONFIG_ENV_ADDR          (CONFIG_SYS_FLASH_BASE + 0x40000)
 225 #       define CONFIG_ENV_SIZE          0x1000
 226 #       define CONFIG_ENV_SECT_SIZE     0x8000
 227 #endif
 228
 229 #define CONFIG_SYS_FLASH_CFI
 230 #ifdef CONFIG_SYS_FLASH_CFI
 231 #       define CONFIG_FLASH_CFI_DRIVER  1
 232 #       define CONFIG_SYS_FLASH_USE_BUFFER_WRITE        1
 233 #       define CONFIG_FLASH_SPANSION_S29WS_N    1
 234 #       define CONFIG_SYS_FLASH_SIZE            0x1000000       /* Max size that the board might have */
 235 #       define CONFIG_SYS_FLASH_CFI_WIDTH       FLASH_CFI_16BIT
 236 #       define CONFIG_SYS_MAX_FLASH_BANKS       1       /* max number of memory banks */
 237 #       define CONFIG_SYS_MAX_FLASH_SECT        137     /* max number of sectors on one chip */
 238 #       define CONFIG_SYS_FLASH_PROTECTION      /* "Real" (hardware) sectors protection */
 239 #       define CONFIG_SYS_FLASH_CHECKSUM
 240 #       define CONFIG_SYS_FLASH_BANKS_LIST      { CONFIG_SYS_CS0_BASE }
 241 #endif
 242
 243 #define LDS_BOARD_TEXT \
 244         arch/m68k/cpu/mcf5227x/built-in.o   (.text*) \
 245         arch/m68k/lib/built-in.o            (.text*)
 246
 247 /*
 248  * This is setting for JFFS2 support in u-boot.
 249  * NOTE: Enable CONFIG_CMD_JFFS2 for JFFS2 support.
 250  */
 251 #ifdef CONFIG_CMD_JFFS2
 252 #       define CONFIG_JFFS2_DEV         "nor0"
 253 #       define CONFIG_JFFS2_PART_SIZE   (0x01000000 - 0x40000)
 254 #       define CONFIG_JFFS2_PART_OFFSET (CONFIG_SYS_FLASH0_BASE + 0x40000)
 255 #endif
 256
 257 /*-----------------------------------------------------------------------
 258  * Cache Configuration
 259  */
 260 #define CONFIG_SYS_CACHELINE_SIZE       16
 261
 262 #define ICACHE_STATUS                   (CONFIG_SYS_INIT_RAM_ADDR + \
 263                                          CONFIG_SYS_INIT_RAM_SIZE - 8)
 264 #define DCACHE_STATUS                   (CONFIG_SYS_INIT_RAM_ADDR + \
 265                                          CONFIG_SYS_INIT_RAM_SIZE - 4)
 266 #define CONFIG_SYS_ICACHE_INV           (CF_CACR_CINV | CF_CACR_INVI)
 267 #define CONFIG_SYS_CACHE_ACR0           (CONFIG_SYS_SDRAM_BASE | \
 268                                          CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \
 269                                          CF_ACR_EN | CF_ACR_SM_ALL)
 270 #define CONFIG_SYS_CACHE_ICACR          (CF_CACR_CENB | CF_CACR_CINV | \
 271                                          CF_CACR_DISD | CF_CACR_INVI | \
 272                                          CF_CACR_CEIB | CF_CACR_DCM | \
 273                                          CF_CACR_EUSP)
 274
 275 /*-----------------------------------------------------------------------
 276  * Memory bank definitions
 277  */
 278 /*
 279  * CS0 - NOR Flash
 280  * CS1 - Available
 281  * CS2 - Available
 282  * CS3 - Available
 283  * CS4 - Available
 284  * CS5 - Available
 285  */
 286
 287 #ifdef CONFIG_CF_SBF
 288 #define CONFIG_SYS_CS0_BASE             0x04000000
 289 #define CONFIG_SYS_CS0_MASK             0x00FF0001
 290 #define CONFIG_SYS_CS0_CTRL             0x00001FA0
 291 #else
 292 #define CONFIG_SYS_CS0_BASE             0x00000000
 293 #define CONFIG_SYS_CS0_MASK             0x00FF0001
 294 #define CONFIG_SYS_CS0_CTRL             0x00001FA0
 295 #endif
 296
 297 #endif                          /* _M52277EVB_H */