include/configs/GEN860T.h

   1 /*
   2  * (C) Copyright 2000
   3  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
   4  * Keith Outwater, keith_outwater@mvis.com
   5  *
   6  * See file CREDITS for list of people who contributed to this
   7  * project.
   8  *
   9  * This program is free software; you can redistribute it and/or
  10  * modify it under the terms of the GNU General Public License as
  11  * published by the Free Software Foundation; either version 2 of
  12  * the License, or (at your option) any later version.
  13  *
  14  * This program is distributed in the hope that it will be useful,
  15  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  16  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  17  * GNU General Public License for more details.
  18  *
  19  * You should have received a copy of the GNU General Public License
  20  * along with this program; if not, write to the Free Software
  21  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  22  * MA 02111-1307 USA
  23  */
  24
  25 /*
  26  * board/config_GEN860T.h - board specific configuration options
  27  */
  28
  29 #ifndef __CONFIG_GEN860T_H
  30 #define __CONFIG_H
  31
  32 /*
  33  * High Level Configuration Options
  34  */
  35 #define CONFIG_MPC860
  36 #define CONFIG_GEN860T
  37
  38 /*
  39  * Identify the board
  40  */
  41 #if !defined(CONFIG_SC)
  42 #define CONFIG_IDENT_STRING             " B2"
  43 #else
  44 #define CONFIG_IDENT_STRING             " SC"
  45 #endif
  46
  47 /*
  48  * Don't depend on the RTC clock to determine clock frequency -
  49  * the 860's internal rtc uses a 32.768 KHz clock which is
  50  * generated by the DS1337 - and the DS1337 clock can be turned off.
  51  */
  52 #if !defined(CONFIG_SC)
  53 #define CONFIG_8xx_GCLK_FREQ            66600000
  54 #else
  55 #define CONFIG_8xx_GCLK_FREQ            48000000
  56 #endif
  57
  58 /*
  59  * The RS-232 console port is on SMC1
  60  */
  61 #define CONFIG_8xx_CONS_SMC1
  62 #define CONFIG_BAUDRATE                 38400
  63
  64 /*
  65  * Set allowable console baud rates
  66  */
  67 #define CFG_BAUDRATE_TABLE              { 9600,         \
  68                                           19200,        \
  69                                           38400,        \
  70                                           57600,        \
  71                                           115200,       \
  72                                         }
  73
  74 /*
  75  * Print console information
  76  */
  77 #undef   CFG_CONSOLE_INFO_QUIET
  78
  79 /*
  80  * Set the autoboot delay in seconds.  A delay of -1 disables autoboot
  81  */
  82 #define CONFIG_BOOTDELAY                                5
  83
  84 /*
  85  * Pass the clock frequency to the Linux kernel in units of MHz
  86  */
  87 #define CONFIG_CLOCKS_IN_MHZ
  88
  89 #define CONFIG_PREBOOT          \
  90         "echo;echo"
  91
  92 #undef  CONFIG_BOOTARGS
  93 #define CONFIG_BOOTCOMMAND      \
  94         "bootp;" \
  95         "setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \
  96         "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; " \
  97         "bootm"
  98
  99 /*
 100  * Turn off echo for serial download by default.  Allow baud rate to be changed
 101  * for downloads
 102  */
 103 #undef  CONFIG_LOADS_ECHO
 104 #define CFG_LOADS_BAUD_CHANGE
 105
 106 /*
 107  * Set default load address for tftp network downloads
 108  */
 109 #define CFG_TFTP_LOADADDR                               0x01000000
 110
 111 /*
 112  * Turn off the watchdog timer
 113  */
 114 #undef  CONFIG_WATCHDOG
 115
 116 /*
 117  * Do not reboot if a panic occurs
 118  */
 119 #define CONFIG_PANIC_HANG
 120
 121 /*
 122  * Enable the status LED
 123  */
 124 #define CONFIG_STATUS_LED
 125
 126 /*
 127  * Reset address. We pick an address such that when an instruction
 128  * is executed at that address, a machine check exception occurs
 129  */
 130 #define CFG_RESET_ADDRESS                               ((ulong) -1)
 131
 132 /*
 133  * BOOTP options
 134  */
 135 #define CONFIG_BOOTP_SUBNETMASK
 136 #define CONFIG_BOOTP_GATEWAY
 137 #define CONFIG_BOOTP_HOSTNAME
 138 #define CONFIG_BOOTP_BOOTPATH
 139 #define CONFIG_BOOTP_BOOTFILESIZE
 140
 141
 142 /*
 143  * The GEN860T network interface uses the on-chip 10/100 FEC with
 144  * an Intel LXT971A PHY connected to the 860T's MII. The PHY's
 145  * MII address is hardwired on the board to zero.
 146  */
 147 #define CONFIG_FEC_ENET
 148 #define CFG_DISCOVER_PHY
 149 #define CONFIG_MII
 150 #define CONFIG_MII_INIT                 1
 151 #define CONFIG_PHY_ADDR                 0
 152
 153 /*
 154  * Set default IP stuff just to get bootstrap entries into the
 155  * environment so that we can autoscript the full default environment.
 156  */
 157 #define CONFIG_ETHADDR                                  9a:52:63:15:85:25
 158 #define CONFIG_SERVERIP                                 10.0.4.201
 159 #define CONFIG_IPADDR                                   10.0.4.111
 160
 161 /*
 162  * This board has a 32 kibibyte EEPROM (Atmel AT24C256) connected to
 163  * the MPC860T I2C interface.
 164  */
 165 #define CFG_I2C_EEPROM_ADDR                             0x50
 166 #define CFG_EEPROM_PAGE_WRITE_BITS              6               /* 64 byte pages                */
 167 #define CFG_EEPROM_PAGE_WRITE_DELAY_MS  12              /* 10 mS w/ 20% margin  */
 168 #define CFG_I2C_EEPROM_ADDR_LEN                 2               /* need 16 bit address  */
 169 #define CONFIG_ENV_EEPROM_SIZE                          (32 * 1024)
 170
 171 /*
 172  * Enable I2C and select the hardware/software driver
 173  */
 174 #define CONFIG_HARD_I2C         1                               /* CPM based I2C                        */
 175 #undef  CONFIG_SOFT_I2C                                         /* Bit-banged I2C                       */
 176
 177 #ifdef CONFIG_HARD_I2C
 178 #define CFG_I2C_SPEED           100000                  /* clock speed in Hz            */
 179 #define CFG_I2C_SLAVE           0xFE                    /* I2C slave address            */
 180 #endif
 181
 182 #ifdef CONFIG_SOFT_I2C
 183 #define PB_SCL                          0x00000020              /* PB 26                                        */
 184 #define PB_SDA                          0x00000010              /* PB 27                                        */
 185 #define I2C_INIT                        (immr->im_cpm.cp_pbdir |=  PB_SCL)
 186 #define I2C_ACTIVE                      (immr->im_cpm.cp_pbdir |=  PB_SDA)
 187 #define I2C_TRISTATE            (immr->im_cpm.cp_pbdir &= ~PB_SDA)
 188 #define I2C_READ                        ((immr->im_cpm.cp_pbdat & PB_SDA) != 0)
 189 #define I2C_SDA(bit)            if(bit) immr->im_cpm.cp_pbdat |=  PB_SDA; \
 190                                                                 else    immr->im_cpm.cp_pbdat &= ~PB_SDA
 191 #define I2C_SCL(bit)            if(bit) immr->im_cpm.cp_pbdat |=  PB_SCL; \
 192                                                                 else    immr->im_cpm.cp_pbdat &= ~PB_SCL
 193 #define I2C_DELAY                       udelay(5)               /* 1/4 I2C clock duration       */
 194 #endif
 195
 196 /*
 197  * Allow environment overwrites by anyone
 198  */
 199 #define CONFIG_ENV_OVERWRITE
 200
 201 #if !defined(CONFIG_SC)
 202 /*
 203  * The MPC860's internal RTC is horribly broken in rev D masks. Three
 204  * internal MPC860T circuit nodes were inadvertently left floating; this
 205  * causes KAPWR current in power down mode to be three orders of magnitude
 206  * higher than specified in the datasheet (from 10 uA to 10 mA).  No
 207  * reasonable battery can keep that kind RTC running during powerdown for any
 208  * length of time, so we use an external RTC on the I2C bus instead.
 209  */
 210 #define CONFIG_RTC_DS1337
 211 #define CFG_I2C_RTC_ADDR                                0x68
 212
 213 #else
 214 /*
 215  * No external RTC on SC variant, so we're stuck with the internal one.
 216  */
 217 #define CONFIG_RTC_MPC8xx
 218 #endif
 219
 220 /*
 221  * Power On Self Test support
 222  */
 223 #define CONFIG_POST                       ( CFG_POST_CACHE              | \
 224                                                                 CFG_POST_MEMORY         | \
 225                                                                 CFG_POST_CPU            | \
 226                                                                 CFG_POST_UART           | \
 227                                                                 CFG_POST_SPR )
 228
 229
 230 /*
 231  * Command line configuration.
 232  */
 233 #include <config_cmd_default.h>
 234
 235 #define CONFIG_CMD_ASKENV
 236 #define CONFIG_CMD_DHCP
 237 #define CONFIG_CMD_I2C
 238 #define CONFIG_CMD_EEPROM
 239 #define CONFIG_CMD_REGINFO
 240 #define CONFIG_CMD_IMMAP
 241 #define CONFIG_CMD_ELF
 242 #define CONFIG_CMD_DATE
 243 #define CONFIG_CMD_FPGA
 244 #define CONFIG_CMD_MII
 245 #define CONFIG_CMD_BEDBUG
 246
 247 #if !defined(CONFIG_SC)
 248     #define CONFIG_CMD_DOC
 249 #endif
 250
 251 #ifdef CONFIG_POST
 252 #define CONFIG_CMD_DIAG
 253 #endif
 254
 255 /*
 256  * There is no IDE/PCMCIA hardware support on the board.
 257  */
 258 #undef  CONFIG_IDE_PCMCIA
 259 #undef  CONFIG_IDE_LED
 260 #undef  CONFIG_IDE_RESET
 261
 262 /*
 263  * Enable the call to misc_init_r() for miscellaneous platform
 264  * dependent initialization.
 265  */
 266 #define CONFIG_MISC_INIT_R
 267
 268 /*
 269  * Enable call to last_stage_init() so we can twiddle some LEDS :)
 270  */
 271 #define CONFIG_LAST_STAGE_INIT
 272
 273 /*
 274  * Virtex2 FPGA configuration support
 275  */
 276 #define CONFIG_FPGA_COUNT               1
 277 #define CONFIG_FPGA
 278 #define CONFIG_FPGA_XILINX
 279 #define CONFIG_FPGA_VIRTEX2
 280 #define CFG_FPGA_PROG_FEEDBACK
 281
 282
 283 #define CONFIG_NAND_LEGACY
 284
 285 /*
 286  * Verbose help from command monitor.
 287  */
 288 #define CFG_LONGHELP
 289 #if !defined(CONFIG_SC)
 290 #define CFG_PROMPT                      "B2> "
 291 #else
 292 #define CFG_PROMPT                      "SC> "
 293 #endif
 294
 295
 296 /*
 297  * Use the "hush" command parser
 298  */
 299 #define CFG_HUSH_PARSER
 300 #define CFG_PROMPT_HUSH_PS2     "> "
 301
 302 /*
 303  * Set buffer size for console I/O
 304  */
 305 #if defined(CONFIG_CMD_KGDB)
 306 #define CFG_CBSIZE                      1024
 307 #else
 308 #define CFG_CBSIZE                      256
 309 #endif
 310
 311 /*
 312  * Print buffer size
 313  */
 314 #define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)
 315
 316 /*
 317  * Maximum number of arguments that a command can accept
 318  */
 319 #define CFG_MAXARGS                     16
 320
 321 /*
 322  * Boot argument buffer size
 323  */
 324 #define CFG_BARGSIZE            CFG_CBSIZE
 325
 326 /*
 327  * Default memory test range
 328  */
 329 #define CFG_MEMTEST_START       0x0100000
 330 #define CFG_MEMTEST_END         (CFG_MEMTEST_START  + (128 * 1024))
 331
 332 /*
 333  * Select the more full-featured memory test
 334  */
 335 #define CFG_ALT_MEMTEST
 336
 337 /*
 338  * Default load address
 339  */
 340 #define CFG_LOAD_ADDR           0x01000000
 341
 342 /*
 343  * Set decrementer frequency (1 ms ticks)
 344  */
 345 #define CFG_HZ                          1000
 346
 347 /*
 348  * Device memory map (after SDRAM remap to 0x0):
 349  *
 350  * CS           Device                          Base Addr       Size
 351  * ----------------------------------------------------
 352  * CS0*         Flash                           0x40000000      64 M
 353  * CS1*         SDRAM                           0x00000000      16 M
 354  * CS2*         Disk-On-Chip            0x50000000      32 K
 355  * CS3*         FPGA                            0x60000000      64 M
 356  * CS4*         SelectMap                       0x70000000      32 K
 357  * CS5*         Mil-Std 1553 I/F        0x80000000      32 K
 358  * CS6*         Unused
 359  * CS7*         Unused
 360  * IMMR         860T Registers          0xfff00000
 361  */
 362
 363 /*
 364  * Base addresses and block sizes
 365  */
 366 #define CFG_IMMR                        0xFF000000
 367
 368 #define SDRAM_BASE                      0x00000000
 369 #define SDRAM_SIZE                      (64 * 1024 * 1024)
 370
 371 #define FLASH_BASE                      0x40000000
 372 #define FLASH_SIZE                      (16 * 1024 * 1024)
 373
 374 #define DOC_BASE                        0x50000000
 375 #define DOC_SIZE                        (32 * 1024)
 376
 377 #define FPGA_BASE                       0x60000000
 378 #define FPGA_SIZE                       (64 * 1024 * 1024)
 379
 380 #define SELECTMAP_BASE          0x70000000
 381 #define SELECTMAP_SIZE          (32 * 1024)
 382
 383 #define M1553_BASE                      0x80000000
 384 #define M1553_SIZE                      (64 * 1024)
 385
 386 /*
 387  * Definitions for initial stack pointer and data area (in DPRAM)
 388  */
 389 #define CFG_INIT_RAM_ADDR               CFG_IMMR
 390 #define CFG_INIT_RAM_END                0x2F00  /* End of used area in DPRAM            */
 391 #define CFG_INIT_DATA_SIZE              64      /* # bytes reserved for initial data*/
 392 #define CFG_GBL_DATA_OFFSET             (CFG_INIT_RAM_END - CFG_INIT_DATA_SIZE)
 393 #define CFG_INIT_SP_OFFSET              CFG_GBL_DATA_OFFSET
 394
 395 /*
 396  * Start addresses for the final memory configuration
 397  * (Set up by the startup code)
 398  * Please note that CFG_SDRAM_BASE _must_ start at 0
 399  */
 400 #define CFG_SDRAM_BASE                  SDRAM_BASE
 401
 402 /*
 403  * FLASH organization
 404  */
 405 #define CFG_FLASH_BASE                  FLASH_BASE
 406 #define CFG_FLASH_SIZE                  FLASH_SIZE
 407 #define CFG_FLASH_SECT_SIZE             (128 * 1024)
 408 #define CFG_MAX_FLASH_BANKS             1
 409 #define CFG_MAX_FLASH_SECT              128
 410
 411 /*
 412  * The timeout values are for an entire chip and are in milliseconds.
 413  * Yes I know that the write timeout is huge.  Accroding to the
 414  * datasheet a single byte takes 630 uS (round to 1 ms) max at worst
 415  * case VCC and temp after 100K programming cycles.  It works out
 416  * to 280 minutes (might as well be forever).
 417  */
 418 #define CFG_FLASH_ERASE_TOUT    (CFG_MAX_FLASH_SECT * 5000)
 419 #define CFG_FLASH_WRITE_TOUT    (CFG_MAX_FLASH_SECT * 128 * 1024 * 1)
 420
 421 /*
 422  * Allow direct writes to FLASH from tftp transfers (** dangerous **)
 423  */
 424 #define CFG_DIRECT_FLASH_TFTP
 425
 426 /*
 427  * Reserve memory for U-Boot.
 428  */
 429 #define CFG_MAX_UBOOT_SECTS             4
 430 #define CFG_MONITOR_LEN                 (CFG_MAX_UBOOT_SECTS * CFG_FLASH_SECT_SIZE)
 431 #define CFG_MONITOR_BASE                CFG_FLASH_BASE
 432
 433 /*
 434  * Select environment placement.  NOTE that u-boot.lds must
 435  * be edited if this is changed!
 436  */
 437 #undef  CONFIG_ENV_IS_IN_FLASH
 438 #define CONFIG_ENV_IS_IN_EEPROM
 439
 440 #if defined(CONFIG_ENV_IS_IN_EEPROM)
 441 #define CONFIG_ENV_SIZE                 (2 * 1024)
 442 #define CONFIG_ENV_OFFSET                       (CONFIG_ENV_EEPROM_SIZE - (8 * 1024))
 443 #else
 444 #define CONFIG_ENV_SIZE                 0x1000
 445 #define CONFIG_ENV_SECT_SIZE            CFG_FLASH_SECT_SIZE
 446
 447 /*
 448  * This ultimately gets passed right into the linker script, so we have to
 449  * use a number :(
 450  */
 451 #define CONFIG_ENV_OFFSET                       0x060000
 452 #endif
 453
 454 /*
 455  * Reserve memory for malloc()
 456  */
 457 #define CFG_MALLOC_LEN          (128 * 1024)
 458
 459 /*
 460  * For booting Linux, the board info and command line data
 461  * have to be in the first 8 MB of memory, since this is
 462  * the maximum mapped by the Linux kernel during initialization.
 463  */
 464 #define CFG_BOOTMAPSZ           (8 * 1024 * 1024)
 465
 466 /*
 467  * Cache Configuration
 468  */
 469 #define CFG_CACHELINE_SIZE              16      /* For all MPC8xx CPUs                          */
 470 #if defined(CONFIG_CMD_KGDB)
 471 #define CFG_CACHELINE_SHIFT             4       /* log base 2 of above value            */
 472 #endif
 473
 474 /*------------------------------------------------------------------------
 475  * SYPCR - System Protection Control                                                    UM 11-9
 476  * -----------------------------------------------------------------------
 477  * SYPCR can only be written once after reset!
 478  *
 479  * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
 480  */
 481 #if defined(CONFIG_WATCHDOG)
 482 #define CFG_SYPCR       ( SYPCR_SWTC    | \
 483                                           SYPCR_BMT     | \
 484                                           SYPCR_BME     | \
 485                                           SYPCR_SWF     | \
 486                                           SYPCR_SWE     | \
 487                                           SYPCR_SWRI    | \
 488                                           SYPCR_SWP               \
 489                                         )
 490 #else
 491 #define CFG_SYPCR       ( SYPCR_SWTC    | \
 492                                           SYPCR_BMT     | \
 493                                           SYPCR_BME     | \
 494                                           SYPCR_SWF     | \
 495                                           SYPCR_SWP               \
 496                                         )
 497 #endif
 498
 499 /*-----------------------------------------------------------------------
 500  * SIUMCR - SIU Module Configuration                                                    UM 11-6
 501  *-----------------------------------------------------------------------
 502  * Set debug pin mux, enable SPKROUT and GPLB5*.
 503  */
 504 #define CFG_SIUMCR      ( SIUMCR_DBGC11 | \
 505                                           SIUMCR_DBPC11 | \
 506                                           SIUMCR_MLRC11 | \
 507                                           SIUMCR_GB5E     \
 508                                         )
 509
 510 /*-----------------------------------------------------------------------
 511  * TBSCR - Time Base Status and Control                                                 UM 11-26
 512  *-----------------------------------------------------------------------
 513  * Clear Reference Interrupt Status, Timebase freeze enabled
 514  */
 515 #define CFG_TBSCR       ( TBSCR_REFA | \
 516                                           TBSCR_REFB | \
 517                                           TBSCR_TBF        \
 518                                         )
 519
 520 /*-----------------------------------------------------------------------
 521  * RTCSC - Real-Time Clock Status and Control Register                  UM 11-27
 522  *-----------------------------------------------------------------------
 523  */
 524 #define CFG_RTCSC       ( RTCSC_SEC     | \
 525                                           RTCSC_ALR | \
 526                                           RTCSC_RTF | \
 527                                           RTCSC_RTE       \
 528                                         )
 529
 530 /*-----------------------------------------------------------------------
 531  * PISCR - Periodic Interrupt Status and Control                                UM 11-31
 532  *-----------------------------------------------------------------------
 533  * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
 534  */
 535 #define CFG_PISCR       ( PISCR_PS              | \
 536                                           PISCR_PITF      \
 537                                         )
 538
 539 /*-----------------------------------------------------------------------
 540  * PLPRCR - PLL, Low-Power, and Reset Control Register                  UM 15-30
 541  *-----------------------------------------------------------------------
 542  * Reset PLL lock status sticky bit, timer expired status bit and timer
 543  * interrupt status bit. Set MF for 1:2:1 mode.
 544  */
 545 #define CFG_PLPRCR      ( ((0x1 << PLPRCR_MF_SHIFT) & PLPRCR_MF_MSK)    | \
 546                                           PLPRCR_SPLSS  | \
 547                                           PLPRCR_TEXPS  | \
 548                                           PLPRCR_TMIST    \
 549                                         )
 550
 551 /*-----------------------------------------------------------------------
 552  * SCCR - System Clock and reset Control Register                               UM 15-27
 553  *-----------------------------------------------------------------------
 554  * Set clock output, timebase and RTC source and divider,
 555  * power management and some other internal clocks
 556  */
 557 #define SCCR_MASK   SCCR_EBDF11
 558
 559 #if !defined(CONFIG_SC)
 560 #define CFG_SCCR        ( SCCR_TBS                      |       /* timebase = GCLK/2    */ \
 561                                           SCCR_COM00            |       /* full strength CLKOUT */ \
 562                                           SCCR_DFSYNC00 |       /* SYNCLK / 1 (normal)  */ \
 563                                           SCCR_DFBRG00          |       /* BRGCLK / 1 (normal)  */ \
 564                                           SCCR_DFNL000          | \
 565                                           SCCR_DFNH000            \
 566                                         )
 567 #else
 568 #define CFG_SCCR        ( SCCR_TBS                      |       /* timebase = GCLK/2    */ \
 569                                           SCCR_COM00            |       /* full strength CLKOUT */ \
 570                                           SCCR_DFSYNC00 |       /* SYNCLK / 1 (normal)  */ \
 571                                           SCCR_DFBRG00          |       /* BRGCLK / 1 (normal)  */ \
 572                                           SCCR_DFNL000          | \
 573                                           SCCR_DFNH000          | \
 574                                           SCCR_RTDIV            | \
 575                                           SCCR_RTSEL              \
 576                                         )
 577 #endif
 578
 579 /*-----------------------------------------------------------------------
 580  * DER - Debug Enable Register                                                                  UM 37-46
 581  *-----------------------------------------------------------------------
 582  * Mask all events that can cause entry into debug mode
 583  */
 584 #define CFG_DER                         0
 585
 586 /*
 587  * Initialize Memory Controller:
 588  *
 589  * BR0 and OR0 (FLASH memory)
 590  */
 591 #define FLASH_BASE0_PRELIM      FLASH_BASE
 592
 593 /*
 594  * Flash address mask
 595  */
 596 #define CFG_PRELIM_OR_AM        0xfe000000
 597
 598 /*
 599  * FLASH timing:
 600  * 33 Mhz bus with ACS = 11, TRLX = 1, CSNT = 1, SCY = 3, EHTR = 1
 601  */
 602 #define CFG_OR_TIMING_FLASH     ( OR_CSNT_SAM   | \
 603                                                           OR_ACS_DIV2   | \
 604                                                           OR_BI                 | \
 605                                                           OR_SCY_2_CLK  | \
 606                                                           OR_TRLX               | \
 607                                                           OR_EHTR                 \
 608                                                         )
 609
 610 #define CFG_OR0_PRELIM  ( CFG_PRELIM_OR_AM              | \
 611                                                   CFG_OR_TIMING_FLASH     \
 612                                                 )
 613
 614 #define CFG_BR0_PRELIM  ( (FLASH_BASE0_PRELIM & BR_BA_MSK)      | \
 615                                                   BR_MS_GPCM                                            | \
 616                                                   BR_PS_8                                                       | \
 617                                                   BR_V                                                            \
 618                                                 )
 619
 620 /*
 621  * SDRAM configuration
 622  */
 623 #define CFG_OR1_AM      0xfc000000
 624 #define CFG_OR1         ( (CFG_OR1_AM & OR_AM_MSK)      | \
 625                                           OR_CSNT_SAM                             \
 626                                         )
 627
 628 #define CFG_BR1         ( (SDRAM_BASE & BR_BA_MSK)      | \
 629                                           BR_MS_UPMA                            | \
 630                                           BR_PS_32                                      | \
 631                                           BR_V                                            \
 632                                         )
 633
 634 /*
 635  * Refresh rate 7.8 us (= 64 ms / 8K = 31.2 uS quad bursts) for one bank
 636  * of 256 MBit SDRAM
 637  */
 638 #define CFG_MPTPR_1BK_8K        MPTPR_PTP_DIV16
 639
 640 /*
 641  * Periodic timer for refresh @ 33 MHz system clock
 642  */
 643 #define CFG_MAMR_PTA    64
 644
 645 /*
 646  * MAMR settings for SDRAM
 647  */
 648 #define CFG_MAMR_8COL   ( (CFG_MAMR_PTA << MAMR_PTA_SHIFT)      | \
 649                                                   MAMR_PTAE                             | \
 650                                                   MAMR_AMA_TYPE_1                       | \
 651                                                   MAMR_DSA_1_CYCL                       | \
 652                                                   MAMR_G0CLA_A10                        | \
 653                                                   MAMR_RLFA_1X                          | \
 654                                                   MAMR_WLFA_1X                          | \
 655                                                   MAMR_TLFA_4X                            \
 656                                                 )
 657
 658 /*
 659  * CS2* configuration for Disk On Chip:
 660  * 33 MHz bus with TRLX=1, ACS=11, CSNT=1, EBDF=1, SCY=2, EHTR=1,
 661  * no burst.
 662  */
 663 #define CFG_OR2_PRELIM  ( (0xffff0000 & OR_AM_MSK)      | \
 664                                                   OR_CSNT_SAM                           | \
 665                                                   OR_ACS_DIV2                           | \
 666                                                   OR_BI                                         | \
 667                                                   OR_SCY_2_CLK                          | \
 668                                                   OR_TRLX                                       | \
 669                                                   OR_EHTR                                         \
 670                                                 )
 671
 672 #define CFG_BR2_PRELIM  ( (DOC_BASE & BR_BA_MSK)        | \
 673                                                   BR_PS_8                                       | \
 674                                                   BR_MS_GPCM                            | \
 675                                                   BR_V                                            \
 676                                                 )
 677
 678 /*
 679  * CS3* configuration for FPGA:
 680  * 33 MHz bus with SCY=15, no burst.
 681  * The FPGA uses TA and TEA to terminate bus cycles, but we
 682  * clear SETA and set the cycle length to a large number so that
 683  * the cycle will still complete even if there is a configuration
 684  * error that prevents TA from asserting on FPGA accesss.
 685  */
 686 #define CFG_OR3_PRELIM  ( (0xfc000000 & OR_AM_MSK)  | \
 687                                                   OR_SCY_15_CLK                         | \
 688                                                   OR_BI                                   \
 689                                                 )
 690
 691 #define CFG_BR3_PRELIM  ( (FPGA_BASE & BR_BA_MSK)       | \
 692                                                   BR_PS_32                                      | \
 693                                                   BR_MS_GPCM                            | \
 694                                                   BR_V                                            \
 695                                                 )
 696 /*
 697  * CS4* configuration for FPGA SelectMap configuration interface.
 698  * 33 MHz bus, UPMB, no burst. Do not assert GPLB5 on falling edge
 699  * of GCLK1_50
 700  */
 701 #define CFG_OR4_PRELIM  ( (0xffff0000 & OR_AM_MSK)      | \
 702                                                   OR_G5LS                                               | \
 703                                                   OR_BI                                                   \
 704                                                 )
 705
 706 #define CFG_BR4_PRELIM  ( (SELECTMAP_BASE & BR_BA_MSK)  | \
 707                                                   BR_PS_8                                               | \
 708                                                   BR_MS_UPMB                                    | \
 709                                                   BR_V                                                    \
 710                                                 )
 711
 712 /*
 713  * CS5* configuration for Mil-Std 1553 databus interface.
 714  * 33 MHz bus, GPCM, no burst.
 715  * The 1553 interface  uses TA and TEA to terminate bus cycles,
 716  * but we clear SETA and set the cycle length to a large number so that
 717  * the cycle will still complete even if there is a configuration
 718  * error that prevents TA from asserting on FPGA accesss.
 719  */
 720 #define CFG_OR5_PRELIM  ( (0xffff0000 & OR_AM_MSK)  | \
 721                                                   OR_SCY_15_CLK                         | \
 722                                                   OR_EHTR                                       | \
 723                                                   OR_TRLX                                       | \
 724                                                   OR_CSNT_SAM                           | \
 725                                                   OR_BI                                           \
 726                                                 )
 727
 728 #define CFG_BR5_PRELIM  ( (M1553_BASE & BR_BA_MSK)      | \
 729                                                   BR_PS_16                                      | \
 730                                                   BR_MS_GPCM                            | \
 731                                                   BR_V                                            \
 732                                                 )
 733
 734 /*
 735  * Boot Flags
 736  */
 737 #define BOOTFLAG_COLD   0x01    /* Normal Power-On: Boot from FLASH     */
 738 #define BOOTFLAG_WARM   0x02    /* Software reboot                                      */
 739
 740 /*
 741  * Disk On Chip (millenium) configuration
 742  */
 743 #if !defined(CONFIG_SC)
 744 #define CFG_MAX_DOC_DEVICE      1
 745 #undef  CFG_DOC_SUPPORT_2000
 746 #define CFG_DOC_SUPPORT_MILLENNIUM
 747 #undef  CFG_DOC_PASSIVE_PROBE
 748 #endif
 749
 750 /*
 751  * FEC interrupt assignment
 752  */
 753 #define FEC_INTERRUPT   SIU_LEVEL1
 754
 755 /*
 756  * Sanity checks
 757  */
 758 #if defined(CONFIG_SCC1_ENET) && defined(CONFIG_FEC_ENET)
 759 #error Both CONFIG_SCC1_ENET and CONFIG_FEC_ENET configured
 760 #endif
 761
 762 #endif  /* __CONFIG_GEN860T_H */