include/configs/C29XPCIE.h

   1 /*
   2  * Copyright 2013 Freescale Semiconductor, Inc.
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 /*
   8  * C29XPCIE board configuration file
   9  */
  10
  11 #ifndef __CONFIG_H
  12 #define __CONFIG_H
  13
  14 #define CONFIG_PHYS_64BIT
  15 #define CONFIG_SYS_GENERIC_BOARD
  16 #define CONFIG_DISPLAY_BOARDINFO
  17
  18 #ifdef CONFIG_C29XPCIE
  19 #define CONFIG_PPC_C29X
  20 #endif
  21
  22 #ifdef CONFIG_SPIFLASH
  23 #define CONFIG_RAMBOOT_SPIFLASH
  24 #define CONFIG_SYS_TEXT_BASE            0x11000000
  25 #define CONFIG_RESET_VECTOR_ADDRESS     0x110bfffc
  26 #endif
  27
  28 #ifdef CONFIG_NAND
  29 #ifdef CONFIG_TPL_BUILD
  30 #define CONFIG_SPL_NAND_BOOT
  31 #define CONFIG_SPL_FLUSH_IMAGE
  32 #define CONFIG_SPL_ENV_SUPPORT
  33 #define CONFIG_SPL_NAND_INIT
  34 #define CONFIG_SPL_SERIAL_SUPPORT
  35 #define CONFIG_SPL_LIBGENERIC_SUPPORT
  36 #define CONFIG_SPL_LIBCOMMON_SUPPORT
  37 #define CONFIG_SPL_I2C_SUPPORT
  38 #define CONFIG_SPL_DRIVERS_MISC_SUPPORT
  39 #define CONFIG_SPL_NAND_SUPPORT
  40 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
  41 #define CONFIG_SPL_COMMON_INIT_DDR
  42 #define CONFIG_SPL_MAX_SIZE             (128 << 10)
  43 #define CONFIG_SPL_TEXT_BASE            0xf8f81000
  44 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
  45 #define CONFIG_SYS_NAND_U_BOOT_SIZE     (832 << 10)
  46 #define CONFIG_SYS_NAND_U_BOOT_DST      (0x11000000)
  47 #define CONFIG_SYS_NAND_U_BOOT_START    (0x11000000)
  48 #define CONFIG_SYS_NAND_U_BOOT_OFFS     ((128 + 128) << 10)
  49 #elif defined(CONFIG_SPL_BUILD)
  50 #define CONFIG_SPL_INIT_MINIMAL
  51 #define CONFIG_SPL_SERIAL_SUPPORT
  52 #define CONFIG_SPL_NAND_SUPPORT
  53 #define CONFIG_SPL_NAND_MINIMAL
  54 #define CONFIG_SPL_FLUSH_IMAGE
  55 #define CONFIG_SPL_TEXT_BASE            0xff800000
  56 #define CONFIG_SPL_MAX_SIZE             8192
  57 #define CONFIG_SYS_NAND_U_BOOT_SIZE     (128 << 10)
  58 #define CONFIG_SYS_NAND_U_BOOT_DST      0xf8f80000
  59 #define CONFIG_SYS_NAND_U_BOOT_START    0xf8f80000
  60 #define CONFIG_SYS_NAND_U_BOOT_OFFS     (128 << 10)
  61 #endif
  62 #define CONFIG_SPL_PAD_TO               0x20000
  63 #define CONFIG_TPL_PAD_TO               0x20000
  64 #define CONFIG_SPL_TARGET               "u-boot-with-spl.bin"
  65 #define CONFIG_SYS_TEXT_BASE            0x11001000
  66 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
  67 #endif
  68
  69 #ifndef CONFIG_SYS_TEXT_BASE
  70 #define CONFIG_SYS_TEXT_BASE            0xeff40000
  71 #endif
  72
  73 #ifndef CONFIG_RESET_VECTOR_ADDRESS
  74 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
  75 #endif
  76
  77 #ifdef CONFIG_SPL_BUILD
  78 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
  79 #else
  80 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
  81 #endif
  82
  83 #ifdef CONFIG_SPL_BUILD
  84 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
  85 #endif
  86
  87 /* High Level Configuration Options */
  88 #define CONFIG_BOOKE                    /* BOOKE */
  89 #define CONFIG_E500                     /* BOOKE e500 family */
  90 #define CONFIG_FSL_IFC                  /* Enable IFC Support */
  91 #define CONFIG_FSL_CAAM                 /* Enable SEC/CAAM */
  92 #define CONFIG_SYS_HAS_SERDES           /* common SERDES init code */
  93
  94 #define CONFIG_PCI                      /* Enable PCI/PCIE */
  95 #ifdef CONFIG_PCI
  96 #define CONFIG_PCIE1                    /* PCIE controler 1 (slot 1) */
  97 #define CONFIG_FSL_PCI_INIT             /* Use common FSL init code */
  98 #define CONFIG_PCI_INDIRECT_BRIDGE
  99 #define CONFIG_FSL_PCIE_RESET           /* need PCIe reset errata */
 100 #define CONFIG_SYS_PCI_64BIT            /* enable 64-bit PCI resources */
 101
 102 #define CONFIG_CMD_NET
 103 #define CONFIG_CMD_PCI
 104
 105 #define CONFIG_E1000
 106
 107 /*
 108  * PCI Windows
 109  * Memory space is mapped 1-1, but I/O space must start from 0.
 110  */
 111 /* controller 1, Slot 1, tgtid 1, Base address a000 */
 112 #define CONFIG_SYS_PCIE1_NAME           "Slot 1"
 113 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
 114 #define CONFIG_SYS_PCIE1_MEM_BUS        0x80000000
 115 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
 116 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x10000000      /* 256M */
 117 #define CONFIG_SYS_PCIE1_IO_VIRT        0xffc00000
 118 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 119 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 120 #define CONFIG_SYS_PCIE1_IO_PHYS        0xfffc00000ull
 121
 122 #define CONFIG_PCI_PNP                  /* do pci plug-and-play */
 123
 124 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 125 #define CONFIG_DOS_PARTITION
 126 #endif
 127
 128 #define CONFIG_FSL_LAW                  /* Use common FSL init code */
 129 #define CONFIG_TSEC_ENET
 130 #define CONFIG_ENV_OVERWRITE
 131
 132 #define CONFIG_DDR_CLK_FREQ     100000000
 133 #define CONFIG_SYS_CLK_FREQ     66666666
 134
 135 #define CONFIG_HWCONFIG
 136
 137 /*
 138  * These can be toggled for performance analysis, otherwise use default.
 139  */
 140 #define CONFIG_L2_CACHE                 /* toggle L2 cache */
 141 #define CONFIG_BTB                      /* toggle branch predition */
 142
 143 #define CONFIG_ADDR_STREAMING           /* toggle addr streaming */
 144
 145 #define CONFIG_ENABLE_36BIT_PHYS
 146
 147 #define CONFIG_ADDR_MAP                 1
 148 #define CONFIG_SYS_NUM_ADDR_MAP         16      /* number of TLB1 entries */
 149
 150 #define CONFIG_SYS_MEMTEST_START        0x00200000
 151 #define CONFIG_SYS_MEMTEST_END          0x00400000
 152 #define CONFIG_PANIC_HANG
 153
 154 /* DDR Setup */
 155 #define CONFIG_SYS_FSL_DDR3
 156 #define CONFIG_DDR_SPD
 157 #define CONFIG_SYS_SPD_BUS_NUM          0
 158 #define SPD_EEPROM_ADDRESS              0x50
 159 #define CONFIG_SYS_DDR_RAW_TIMING
 160
 161 /* DDR ECC Setup*/
 162 #define CONFIG_DDR_ECC
 163 #define CONFIG_MEM_INIT_VALUE           0xDeadBeef
 164 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
 165
 166 #define CONFIG_SYS_SDRAM_SIZE           512
 167 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 168 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 169
 170 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 171 #define CONFIG_CHIP_SELECTS_PER_CTRL    1
 172
 173 #define CONFIG_SYS_CCSRBAR              0xffe00000
 174 #define CONFIG_SYS_CCSRBAR_PHYS_LOW     CONFIG_SYS_CCSRBAR
 175
 176 /* Platform SRAM setting  */
 177 #define CONFIG_SYS_PLATFORM_SRAM_BASE   0xffb00000
 178 #define CONFIG_SYS_PLATFORM_SRAM_BASE_PHYS \
 179                         (0xf00000000ull | CONFIG_SYS_PLATFORM_SRAM_BASE)
 180 #define CONFIG_SYS_PLATFORM_SRAM_SIZE   (512 << 10)
 181
 182 #ifdef CONFIG_SPL_BUILD
 183 #define CONFIG_SYS_NO_FLASH
 184 #endif
 185
 186 /*
 187  * IFC Definitions
 188  */
 189 /* NOR Flash on IFC */
 190 #define CONFIG_SYS_FLASH_BASE           0xec000000
 191 #define CONFIG_SYS_MAX_FLASH_SECT       512     /* 64M */
 192
 193 #define CONFIG_SYS_FLASH_BASE_PHYS      (0xf00000000ull | CONFIG_SYS_FLASH_BASE)
 194
 195 #define CONFIG_SYS_FLASH_BANKS_LIST     { CONFIG_SYS_FLASH_BASE_PHYS }
 196 #define CONFIG_SYS_MAX_FLASH_BANKS      1
 197
 198 #define CONFIG_SYS_FLASH_QUIET_TEST
 199 #define CONFIG_FLASH_SHOW_PROGRESS      45
 200 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* in ms */
 201 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* in ms */
 202
 203 /* 16Bit NOR Flash - S29GL512S10TFI01 */
 204 #define CONFIG_SYS_NOR_CSPR     (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
 205                                 CSPR_PORT_SIZE_16 | \
 206                                 CSPR_MSEL_NOR | \
 207                                 CSPR_V)
 208 #define CONFIG_SYS_NOR_AMASK    IFC_AMASK(64*1024*1024)
 209 #define CONFIG_SYS_NOR_CSOR     CSOR_NOR_ADM_SHIFT(4)
 210
 211 #define CONFIG_SYS_NOR_FTIM0    (FTIM0_NOR_TACSE(0x4) | \
 212                                 FTIM0_NOR_TEADC(0x5) | \
 213                                 FTIM0_NOR_TEAHC(0x5))
 214 #define CONFIG_SYS_NOR_FTIM1    (FTIM1_NOR_TACO(0x35) | \
 215                                 FTIM1_NOR_TRAD_NOR(0x1A) |\
 216                                 FTIM1_NOR_TSEQRAD_NOR(0x13))
 217 #define CONFIG_SYS_NOR_FTIM2    (FTIM2_NOR_TCS(0x4) | \
 218                                 FTIM2_NOR_TCH(0x4) | \
 219                                 FTIM2_NOR_TWPH(0x0E) | \
 220                                 FTIM2_NOR_TWP(0x1c))
 221 #define CONFIG_SYS_NOR_FTIM3    0x0
 222
 223 /* CFI for NOR Flash */
 224 #define CONFIG_FLASH_CFI_DRIVER
 225 #define CONFIG_SYS_FLASH_CFI
 226 #define CONFIG_SYS_FLASH_EMPTY_INFO
 227 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 228
 229 /* NAND Flash on IFC */
 230 #define CONFIG_NAND_FSL_IFC
 231 #define CONFIG_SYS_NAND_BASE            0xff800000
 232 #define CONFIG_SYS_NAND_BASE_PHYS       0xfff800000ull
 233
 234 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
 235
 236 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 237 #define CONFIG_MTD_NAND_VERIFY_WRITE
 238 #define CONFIG_CMD_NAND
 239 #define CONFIG_SYS_NAND_BLOCK_SIZE      (1024 * 1024)
 240
 241 /* 8Bit NAND Flash - K9F1G08U0B */
 242 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 243                                 | CSPR_PORT_SIZE_8 \
 244                                 | CSPR_MSEL_NAND \
 245                                 | CSPR_V)
 246 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64*1024)
 247 #define CONFIG_SYS_NAND_OOBSIZE 0x00000280      /* 640b */
 248 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 249                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 250                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
 251                                 | CSOR_NAND_RAL_3       /* RAL = 3 Bytes */ \
 252                                 | CSOR_NAND_PGS_8K      /* Page Size = 8K */ \
 253                                 | CSOR_NAND_SPRZ_CSOR_EXT /*oob in csor_ext*/\
 254                                 | CSOR_NAND_PB(128))    /*128 Pages Per Block*/
 255 #define CONFIG_SYS_NAND_FTIM0   (FTIM0_NAND_TCCST(0x01) | \
 256                                 FTIM0_NAND_TWP(0x0c)   | \
 257                                 FTIM0_NAND_TWCHT(0x08) | \
 258                                 FTIM0_NAND_TWH(0x06))
 259 #define CONFIG_SYS_NAND_FTIM1   (FTIM1_NAND_TADLE(0x28) | \
 260                                 FTIM1_NAND_TWBE(0x1d)  | \
 261                                 FTIM1_NAND_TRR(0x08)   | \
 262                                 FTIM1_NAND_TRP(0x0c))
 263 #define CONFIG_SYS_NAND_FTIM2   (FTIM2_NAND_TRAD(0x0c) | \
 264                                 FTIM2_NAND_TREH(0x0a) | \
 265                                 FTIM2_NAND_TWHRE(0x18))
 266 #define CONFIG_SYS_NAND_FTIM3   (FTIM3_NAND_TWW(0x04))
 267
 268 #define CONFIG_SYS_NAND_DDR_LAW         11
 269
 270 /* Set up IFC registers for boot location NOR/NAND */
 271 #ifdef CONFIG_NAND
 272 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
 273 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
 274 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
 275 #define CONFIG_SYS_CSOR0_EXT            CONFIG_SYS_NAND_OOBSIZE
 276 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
 277 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
 278 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
 279 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
 280 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR_CSPR
 281 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
 282 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 283 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 284 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 285 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 286 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 287 #else
 288 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR_CSPR
 289 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 290 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 291 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 292 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 293 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 294 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 295 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NAND_CSPR
 296 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NAND_AMASK
 297 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NAND_CSOR
 298 #define CONFIG_SYS_CSOR1_EXT            CONFIG_SYS_NAND_OOBSIZE
 299 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NAND_FTIM0
 300 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NAND_FTIM1
 301 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NAND_FTIM2
 302 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NAND_FTIM3
 303 #endif
 304
 305 /* CPLD on IFC, selected by CS2 */
 306 #define CONFIG_SYS_CPLD_BASE            0xffdf0000
 307 #define CONFIG_SYS_CPLD_BASE_PHYS       (0xf00000000ull \
 308                                         | CONFIG_SYS_CPLD_BASE)
 309
 310 #define CONFIG_SYS_CSPR2        (CSPR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE_PHYS) \
 311                                 | CSPR_PORT_SIZE_8 \
 312                                 | CSPR_MSEL_GPCM \
 313                                 | CSPR_V)
 314 #define CONFIG_SYS_AMASK2       IFC_AMASK(64*1024)
 315 #define CONFIG_SYS_CSOR2        0x0
 316 /* CPLD Timing parameters for IFC CS2 */
 317 #define CONFIG_SYS_CS2_FTIM0    (FTIM0_GPCM_TACSE(0x0e) | \
 318                                 FTIM0_GPCM_TEADC(0x0e) | \
 319                                 FTIM0_GPCM_TEAHC(0x0e))
 320 #define CONFIG_SYS_CS2_FTIM1    (FTIM1_GPCM_TACO(0x0e) | \
 321                                 FTIM1_GPCM_TRAD(0x1f))
 322 #define CONFIG_SYS_CS2_FTIM2    (FTIM2_GPCM_TCS(0x0e) | \
 323                                 FTIM2_GPCM_TCH(0x8) | \
 324                                 FTIM2_GPCM_TWP(0x1f))
 325 #define CONFIG_SYS_CS2_FTIM3    0x0
 326
 327 #if defined(CONFIG_RAMBOOT_SPIFLASH)
 328 #define CONFIG_SYS_RAMBOOT
 329 #define CONFIG_SYS_EXTRA_ENV_RELOC
 330 #endif
 331
 332 #define CONFIG_BOARD_EARLY_INIT_R
 333
 334 #define CONFIG_SYS_INIT_RAM_LOCK
 335 #define CONFIG_SYS_INIT_RAM_ADDR        0xffd00000
 336 #define CONFIG_SYS_INIT_RAM_END         0x00004000
 337
 338 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_END \
 339                                                 - GENERATED_GBL_DATA_SIZE)
 340 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 341
 342 #define CONFIG_SYS_MONITOR_LEN          (768 * 1024)
 343 #define CONFIG_SYS_MALLOC_LEN           (2 * 1024 * 1024)
 344
 345 /*
 346  * Config the L2 Cache as L2 SRAM
 347  */
 348 #if defined(CONFIG_SPL_BUILD)
 349 #if defined(CONFIG_SDCARD) || defined(CONFIG_SPIFLASH)
 350 #define CONFIG_SYS_INIT_L2_ADDR         0xf8f80000
 351 #define CONFIG_SYS_INIT_L2_ADDR_PHYS    CONFIG_SYS_INIT_L2_ADDR
 352 #define CONFIG_SYS_L2_SIZE              (256 << 10)
 353 #define CONFIG_SYS_INIT_L2_END  (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
 354 #define CONFIG_SPL_RELOC_TEXT_BASE      0xf8f81000
 355 #define CONFIG_SPL_RELOC_STACK          (CONFIG_SYS_INIT_L2_ADDR + 128 * 1024)
 356 #define CONFIG_SPL_RELOC_STACK_SIZE     (32 << 10)
 357 #define CONFIG_SPL_RELOC_MALLOC_ADDR    (CONFIG_SYS_INIT_L2_ADDR + 160 * 1024)
 358 #define CONFIG_SPL_RELOC_MALLOC_SIZE    (96 << 10)
 359 #define CONFIG_SPL_GD_ADDR              (CONFIG_SYS_INIT_L2_ADDR + 112 * 1024)
 360 #elif defined(CONFIG_NAND)
 361 #ifdef CONFIG_TPL_BUILD
 362 #define CONFIG_SYS_INIT_L2_ADDR         0xf8f80000
 363 #define CONFIG_SYS_INIT_L2_ADDR_PHYS    CONFIG_SYS_INIT_L2_ADDR
 364 #define CONFIG_SYS_L2_SIZE              (256 << 10)
 365 #define CONFIG_SYS_INIT_L2_END  (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
 366 #define CONFIG_SPL_RELOC_TEXT_BASE      0xf8f81000
 367 #define CONFIG_SPL_RELOC_STACK          (CONFIG_SYS_INIT_L2_ADDR + 192 * 1024)
 368 #define CONFIG_SPL_RELOC_MALLOC_ADDR    (CONFIG_SYS_INIT_L2_ADDR + 208 * 1024)
 369 #define CONFIG_SPL_RELOC_MALLOC_SIZE    (48 << 10)
 370 #define CONFIG_SPL_GD_ADDR              (CONFIG_SYS_INIT_L2_ADDR + 176 * 1024)
 371 #else
 372 #define CONFIG_SYS_INIT_L2_ADDR         0xf8f80000
 373 #define CONFIG_SYS_INIT_L2_ADDR_PHYS    CONFIG_SYS_INIT_L2_ADDR
 374 #define CONFIG_SYS_L2_SIZE              (256 << 10)
 375 #define CONFIG_SYS_INIT_L2_END  (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
 376 #define CONFIG_SPL_RELOC_TEXT_BASE      (CONFIG_SYS_INIT_L2_END - 0x3000)
 377 #define CONFIG_SPL_RELOC_STACK          ((CONFIG_SYS_INIT_L2_END - 1) & ~0xF)
 378 #endif
 379 #endif
 380 #endif
 381
 382 /* Serial Port */
 383 #define CONFIG_CONS_INDEX       1
 384 #define CONFIG_SYS_NS16550
 385 #define CONFIG_SYS_NS16550_SERIAL
 386 #define CONFIG_SYS_NS16550_REG_SIZE     1
 387 #define CONFIG_SYS_NS16550_CLK          get_bus_freq(0)
 388
 389 #if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_INIT_MINIMAL)
 390 #define CONFIG_NS16550_MIN_FUNCTIONS
 391 #endif
 392
 393 #define CONFIG_SERIAL_MULTI             /* Enable both serial ports */
 394 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
 395
 396 #define CONFIG_SYS_BAUDRATE_TABLE       \
 397         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 398
 399 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500)
 400 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600)
 401
 402 /* Use the HUSH parser */
 403 #define CONFIG_SYS_HUSH_PARSER
 404
 405 /*
 406  * Pass open firmware flat tree
 407  */
 408 #define CONFIG_OF_LIBFDT
 409 #define CONFIG_OF_BOARD_SETUP
 410 #define CONFIG_OF_STDOUT_VIA_ALIAS
 411
 412 /* new uImage format support */
 413 #define CONFIG_FIT
 414 #define CONFIG_FIT_VERBOSE      /* enable fit_format_{error,warning}() */
 415
 416 #define CONFIG_SYS_I2C
 417 #define CONFIG_SYS_I2C_FSL
 418 #define CONFIG_SYS_FSL_I2C_SPEED        400000
 419 #define CONFIG_SYS_FSL_I2C2_SPEED       400000
 420 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 421 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
 422 #define CONFIG_SYS_FSL_I2C_OFFSET       0x3000
 423 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x3100
 424
 425 /* I2C EEPROM */
 426 /* enable read and write access to EEPROM */
 427 #define CONFIG_CMD_EEPROM
 428 #define CONFIG_SYS_I2C_MULTI_EEPROMS
 429 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
 430 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
 431 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
 432
 433 #define CONFIG_CMD_I2C
 434
 435 /* eSPI - Enhanced SPI */
 436 #define CONFIG_FSL_ESPI
 437 #define CONFIG_SPI_FLASH
 438 #define CONFIG_SPI_FLASH_SPANSION
 439 #define CONFIG_SPI_FLASH_EON
 440 #define CONFIG_CMD_SF
 441 #define CONFIG_SF_DEFAULT_SPEED         10000000
 442 #define CONFIG_SF_DEFAULT_MODE          SPI_MODE_0
 443
 444 #ifdef CONFIG_TSEC_ENET
 445 #define CONFIG_NET_MULTI
 446 #define CONFIG_MII                      /* MII PHY management */
 447 #define CONFIG_MII_DEFAULT_TSEC 1       /* Allow unregistered phys */
 448 #define CONFIG_TSEC1            1
 449 #define CONFIG_TSEC1_NAME       "eTSEC1"
 450 #define CONFIG_TSEC2            1
 451 #define CONFIG_TSEC2_NAME       "eTSEC2"
 452
 453 /* Default mode is RGMII mode */
 454 #define TSEC1_PHY_ADDR          0
 455 #define TSEC2_PHY_ADDR          2
 456
 457 #define TSEC1_FLAGS             (TSEC_GIGABIT | TSEC_REDUCED)
 458 #define TSEC2_FLAGS             (TSEC_GIGABIT | TSEC_REDUCED)
 459
 460 #define CONFIG_ETHPRIME         "eTSEC1"
 461
 462 #define CONFIG_PHY_GIGE
 463 #endif  /* CONFIG_TSEC_ENET */
 464
 465 /*
 466  * Environment
 467  */
 468 #if defined(CONFIG_SYS_RAMBOOT)
 469 #if defined(CONFIG_RAMBOOT_SPIFLASH)
 470 #define CONFIG_ENV_IS_IN_SPI_FLASH
 471 #define CONFIG_ENV_SPI_BUS      0
 472 #define CONFIG_ENV_SPI_CS       0
 473 #define CONFIG_ENV_SPI_MAX_HZ   10000000
 474 #define CONFIG_ENV_SPI_MODE     0
 475 #define CONFIG_ENV_OFFSET       0x100000        /* 1MB */
 476 #define CONFIG_ENV_SECT_SIZE    0x10000
 477 #define CONFIG_ENV_SIZE         0x2000
 478 #endif
 479 #elif defined(CONFIG_NAND)
 480 #define CONFIG_ENV_IS_IN_NAND
 481 #ifdef CONFIG_TPL_BUILD
 482 #define CONFIG_ENV_SIZE         0x2000
 483 #define CONFIG_ENV_ADDR         (CONFIG_SYS_INIT_L2_ADDR + (160 << 10))
 484 #else
 485 #define CONFIG_ENV_SIZE         CONFIG_SYS_NAND_BLOCK_SIZE
 486 #define CONFIG_ENV_RANGE        CONFIG_ENV_SIZE
 487 #endif
 488 #define CONFIG_ENV_OFFSET       CONFIG_SYS_NAND_BLOCK_SIZE
 489 #else
 490 #define CONFIG_ENV_IS_IN_FLASH
 491 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 492 #define CONFIG_ENV_SIZE         0x2000
 493 #define CONFIG_ENV_SECT_SIZE    0x20000
 494 #endif
 495
 496 #define CONFIG_LOADS_ECHO
 497 #define CONFIG_SYS_LOADS_BAUD_CHANGE
 498
 499 /*
 500  * Command line configuration.
 501  */
 502 #include <config_cmd_default.h>
 503
 504 #define CONFIG_CMD_ERRATA
 505 #define CONFIG_CMD_ELF
 506 #define CONFIG_CMD_IRQ
 507 #define CONFIG_CMD_MII
 508 #define CONFIG_CMD_PING
 509 #define CONFIG_CMD_SETEXPR
 510 #define CONFIG_CMD_REGINFO
 511
 512 /* Hash command with SHA acceleration supported in hardware */
 513 #ifdef CONFIG_FSL_CAAM
 514 #define CONFIG_CMD_HASH
 515 #define CONFIG_SHA_HW_ACCEL
 516 #endif
 517
 518 /*
 519  * Miscellaneous configurable options
 520  */
 521 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 522 #define CONFIG_CMDLINE_EDITING                  /* Command-line editing */
 523 #define CONFIG_AUTO_COMPLETE                    /* add autocompletion support */
 524 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 525
 526 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size */
 527 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 528                                                 /* Print Buffer Size */
 529 #define CONFIG_SYS_MAXARGS      16              /* max number of command args */
 530 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
 531
 532 /*
 533  * For booting Linux, the board info and command line data
 534  * have to be in the first 64 MB of memory, since this is
 535  * the maximum mapped by the Linux kernel during initialization.
 536  */
 537 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20) /* Initial Memory map for Linux */
 538 #define CONFIG_SYS_BOOTM_LEN    (64 << 20) /* Increase max gunzip size */
 539
 540 /*
 541  * Environment Configuration
 542  */
 543
 544 #ifdef CONFIG_TSEC_ENET
 545 #define CONFIG_HAS_ETH0
 546 #define CONFIG_HAS_ETH1
 547 #endif
 548
 549 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 550 #define CONFIG_BOOTFILE         "uImage"
 551 #define CONFIG_UBOOTPATH        u-boot.bin/* U-Boot image on TFTP server */
 552
 553 /* default location for tftp and bootm */
 554 #define CONFIG_LOADADDR         1000000
 555
 556 #define CONFIG_BOOTDELAY        -1      /* -1 disables auto-boot */
 557
 558 #define CONFIG_BAUDRATE         115200
 559
 560 #define CONFIG_DEF_HWCONFIG     fsl_ddr:ecc=on
 561
 562 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 563         "hwconfig=" __stringify(CONFIG_DEF_HWCONFIG)  "\0"      \
 564         "netdev=eth0\0"                                         \
 565         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"             \
 566         "loadaddr=1000000\0"                            \
 567         "consoledev=ttyS0\0"                            \
 568         "ramdiskaddr=2000000\0"                         \
 569         "ramdiskfile=rootfs.ext2.gz.uboot\0"            \
 570         "fdtaddr=c00000\0"                              \
 571         "fdtfile=name/of/device-tree.dtb\0"                     \
 572         "othbootargs=ramdisk_size=600000\0"             \
 573
 574 #define CONFIG_RAMBOOTCOMMAND                   \
 575         "setenv bootargs root=/dev/ram rw "     \
 576         "console=$consoledev,$baudrate $othbootargs; "  \
 577         "tftp $ramdiskaddr $ramdiskfile;"       \
 578         "tftp $loadaddr $bootfile;"             \
 579         "tftp $fdtaddr $fdtfile;"               \
 580         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 581
 582 #define CONFIG_BOOTCOMMAND CONFIG_RAMBOOTCOMMAND
 583
 584 #include <asm/fsl_secure_boot.h>
 585
 586 #endif  /* __CONFIG_H */