include/configs/BSC9132QDS.h

   1 /*
   2  * Copyright 2013 Freescale Semiconductor, Inc.
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 /*
   8  * BSC9132 QDS board configuration file
   9  */
  10
  11 #ifndef __CONFIG_H
  12 #define __CONFIG_H
  13
  14 #ifdef CONFIG_BSC9132QDS
  15 #define CONFIG_BSC9132
  16 #endif
  17
  18 #define CONFIG_MISC_INIT_R
  19
  20 #ifdef CONFIG_SDCARD
  21 #define CONFIG_RAMBOOT_SDCARD
  22 #define CONFIG_SYS_RAMBOOT
  23 #define CONFIG_SYS_EXTRA_ENV_RELOC
  24 #define CONFIG_SYS_TEXT_BASE            0x11000000
  25 #define CONFIG_RESET_VECTOR_ADDRESS     0x1107fffc
  26 #endif
  27 #define CONFIG_SYS_FSL_ERRATUM_IFC_A002769      1
  28 #ifdef CONFIG_SPIFLASH
  29 #define CONFIG_RAMBOOT_SPIFLASH
  30 #define CONFIG_SYS_RAMBOOT
  31 #define CONFIG_SYS_EXTRA_ENV_RELOC
  32 #define CONFIG_SYS_TEXT_BASE            0x11000000
  33 #define CONFIG_RESET_VECTOR_ADDRESS     0x1107fffc
  34 #endif
  35
  36 #ifdef CONFIG_NAND
  37 #define CONFIG_SPL
  38 #define CONFIG_SPL_INIT_MINIMAL
  39 #define CONFIG_SPL_SERIAL_SUPPORT
  40 #define CONFIG_SPL_NAND_SUPPORT
  41 #define CONFIG_SPL_NAND_MINIMAL
  42 #define CONFIG_SPL_FLUSH_IMAGE
  43 #define CONFIG_SPL_TARGET               "u-boot-with-spl.bin"
  44
  45 #define CONFIG_SYS_TEXT_BASE            0x00201000
  46 #define CONFIG_SPL_TEXT_BASE            0xFFFFE000
  47 #define CONFIG_SPL_MAX_SIZE             8192
  48 #define CONFIG_SPL_RELOC_TEXT_BASE      0x00100000
  49 #define CONFIG_SPL_RELOC_STACK          0x00100000
  50 #define CONFIG_SYS_NAND_U_BOOT_SIZE     ((512 << 10) - 0x2000)
  51 #define CONFIG_SYS_NAND_U_BOOT_DST      (0x00200000 - CONFIG_SPL_MAX_SIZE)
  52 #define CONFIG_SYS_NAND_U_BOOT_START    0x00200000
  53 #define CONFIG_SYS_NAND_U_BOOT_OFFS     0
  54 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
  55 #endif
  56
  57 #ifndef CONFIG_SYS_TEXT_BASE
  58 #define CONFIG_SYS_TEXT_BASE            0x8ff80000
  59 #endif
  60
  61 #ifndef CONFIG_RESET_VECTOR_ADDRESS
  62 #define CONFIG_RESET_VECTOR_ADDRESS     0x8ffffffc
  63 #endif
  64
  65 #ifdef CONFIG_SPL_BUILD
  66 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
  67 #else
  68 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
  69 #endif
  70
  71 /* High Level Configuration Options */
  72 #define CONFIG_BOOKE                    /* BOOKE */
  73 #define CONFIG_E500                     /* BOOKE e500 family */
  74 #define CONFIG_MPC85xx
  75 #define CONFIG_FSL_IFC                  /* Enable IFC Support */
  76 #define CONFIG_SYS_HAS_SERDES           /* common SERDES init code */
  77
  78 #define CONFIG_PCI                      /* Enable PCI/PCIE */
  79 #if defined(CONFIG_PCI)
  80 #define CONFIG_PCIE1                    /* PCIE controler 1 (slot 1) */
  81 #define CONFIG_FSL_PCI_INIT             /* Use common FSL init code */
  82 #define CONFIG_PCI_INDIRECT_BRIDGE      /* indirect PCI bridge support */
  83 #define CONFIG_FSL_PCIE_RESET           /* need PCIe reset errata */
  84 #define CONFIG_SYS_PCI_64BIT            /* enable 64-bit PCI resources */
  85
  86 #define CONFIG_CMD_NET
  87 #define CONFIG_CMD_PCI
  88
  89 #define CONFIG_E1000                    /*  E1000 pci Ethernet card*/
  90
  91 /*
  92  * PCI Windows
  93  * Memory space is mapped 1-1, but I/O space must start from 0.
  94  */
  95 /* controller 1, Slot 1, tgtid 1, Base address a000 */
  96 #define CONFIG_SYS_PCIE1_NAME           "PCIe Slot"
  97 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x90000000
  98 #define CONFIG_SYS_PCIE1_MEM_BUS        0x90000000
  99 #define CONFIG_SYS_PCIE1_MEM_PHYS       0x90000000
 100 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x10000000      /* 256M */
 101 #define CONFIG_SYS_PCIE1_IO_VIRT        0xC0010000
 102 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 103 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 104 #define CONFIG_SYS_PCIE1_IO_PHYS        0xC0010000
 105
 106 #define CONFIG_PCI_PNP                  /* do pci plug-and-play */
 107
 108 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 109 #define CONFIG_DOS_PARTITION
 110 #endif
 111
 112 #define CONFIG_FSL_LAW                  /* Use common FSL init code */
 113 #define CONFIG_ENV_OVERWRITE
 114 #define CONFIG_TSEC_ENET /* ethernet */
 115
 116 #if defined(CONFIG_SYS_CLK_100_DDR_100)
 117 #define CONFIG_SYS_CLK_FREQ     100000000
 118 #define CONFIG_DDR_CLK_FREQ     100000000
 119 #elif defined(CONFIG_SYS_CLK_100_DDR_133)
 120 #define CONFIG_SYS_CLK_FREQ     100000000
 121 #define CONFIG_DDR_CLK_FREQ     133000000
 122 #endif
 123
 124 #define CONFIG_MP
 125
 126 #define CONFIG_HWCONFIG
 127 /*
 128  * These can be toggled for performance analysis, otherwise use default.
 129  */
 130 #define CONFIG_L2_CACHE                 /* toggle L2 cache */
 131 #define CONFIG_BTB                      /* enable branch predition */
 132
 133 #define CONFIG_SYS_MEMTEST_START        0x01000000      /* memtest works on */
 134 #define CONFIG_SYS_MEMTEST_END          0x01ffffff
 135
 136 /* DDR Setup */
 137 #define CONFIG_SYS_FSL_DDR3
 138 #define CONFIG_SYS_SPD_BUS_NUM          0
 139 #define SPD_EEPROM_ADDRESS1             0x54 /* I2C access */
 140 #define SPD_EEPROM_ADDRESS2             0x56 /* I2C access */
 141 #define CONFIG_FSL_DDR_INTERACTIVE
 142
 143 #define CONFIG_MEM_INIT_VALUE           0xDeadBeef
 144
 145 #define CONFIG_SYS_SDRAM_SIZE           (1024)
 146 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 147 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 148
 149 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 150
 151 /* DDR3 Controller Settings */
 152 #define CONFIG_CHIP_SELECTS_PER_CTRL    1
 153 #define CONFIG_SYS_DDR_CS0_BNDS         0x0000003F
 154 #define CONFIG_SYS_DDR_CS0_CONFIG_1333  0x80004302
 155 #define CONFIG_SYS_DDR_CS0_CONFIG_800   0x80014302
 156 #define CONFIG_SYS_DDR_CS0_CONFIG_2     0x00000000
 157 #define CONFIG_SYS_DDR_DATA_INIT        0xdeadbeef
 158 #define CONFIG_SYS_DDR_INIT_ADDR        0x00000000
 159 #define CONFIG_SYS_DDR_INIT_EXT_ADDR    0x00000000
 160 #define CONFIG_SYS_DDR_MODE_CONTROL     0x00000000
 161 #define CONFIG_SYS_DDR1_CS0_BNDS       0x0040007F
 162
 163 #define CONFIG_SYS_DDR_ZQ_CONTROL       0x89080600
 164 #define CONFIG_SYS_DDR_SR_CNTR          0x00000000
 165 #define CONFIG_SYS_DDR_RCW_1            0x00000000
 166 #define CONFIG_SYS_DDR_RCW_2            0x00000000
 167 #define CONFIG_SYS_DDR_CONTROL_800              0x470C0000
 168 #define CONFIG_SYS_DDR_CONTROL_2_800    0x04401050
 169 #define CONFIG_SYS_DDR_TIMING_4_800             0x00220001
 170 #define CONFIG_SYS_DDR_TIMING_5_800             0x03402400
 171
 172 #define CONFIG_SYS_DDR_CONTROL_1333             0x470C0008
 173 #define CONFIG_SYS_DDR_CONTROL_2_1333   0x24401010
 174 #define CONFIG_SYS_DDR_TIMING_4_1333            0x00000001
 175 #define CONFIG_SYS_DDR_TIMING_5_1333            0x03401400
 176
 177 #define CONFIG_SYS_DDR_TIMING_3_800             0x00020000
 178 #define CONFIG_SYS_DDR_TIMING_0_800             0x00330004
 179 #define CONFIG_SYS_DDR_TIMING_1_800             0x6f6B4846
 180 #define CONFIG_SYS_DDR_TIMING_2_800             0x0FA8C8CF
 181 #define CONFIG_SYS_DDR_CLK_CTRL_800             0x03000000
 182 #define CONFIG_SYS_DDR_MODE_1_800               0x40461520
 183 #define CONFIG_SYS_DDR_MODE_2_800               0x8000c000
 184 #define CONFIG_SYS_DDR_INTERVAL_800             0x0C300000
 185 #define CONFIG_SYS_DDR_WRLVL_CONTROL_800        0x8655A608
 186
 187 #define CONFIG_SYS_DDR_TIMING_3_1333            0x01061000
 188 #define CONFIG_SYS_DDR_TIMING_0_1333            0x00440104
 189 #define CONFIG_SYS_DDR_TIMING_1_1333            0x98913A45
 190 #define CONFIG_SYS_DDR_TIMING_2_1333            0x0FB8B114
 191 #define CONFIG_SYS_DDR_CLK_CTRL_1333            0x02800000
 192 #define CONFIG_SYS_DDR_MODE_1_1333              0x00061A50
 193 #define CONFIG_SYS_DDR_MODE_2_1333              0x00100000
 194 #define CONFIG_SYS_DDR_INTERVAL_1333            0x144E0513
 195 #define CONFIG_SYS_DDR_WRLVL_CONTROL_1333       0x8655F607
 196
 197 /*FIXME: the following params are constant w.r.t diff freq
 198 combinations. this should be removed later
 199 */
 200 #if CONFIG_DDR_CLK_FREQ == 100000000
 201 #define CONFIG_SYS_DDR_CS0_CONFIG CONFIG_SYS_DDR_CS0_CONFIG_800
 202 #define CONFIG_SYS_DDR_CONTROL          CONFIG_SYS_DDR_CONTROL_800
 203 #define CONFIG_SYS_DDR_CONTROL_2 CONFIG_SYS_DDR_CONTROL_2_800
 204 #define CONFIG_SYS_DDR_TIMING_4 CONFIG_SYS_DDR_TIMING_4_800
 205 #define CONFIG_SYS_DDR_TIMING_5 CONFIG_SYS_DDR_TIMING_5_800
 206 #elif CONFIG_DDR_CLK_FREQ == 133000000
 207 #define CONFIG_SYS_DDR_CS0_CONFIG CONFIG_SYS_DDR_CS0_CONFIG_1333
 208 #define CONFIG_SYS_DDR_CONTROL          CONFIG_SYS_DDR_CONTROL_1333
 209 #define CONFIG_SYS_DDR_CONTROL_2        CONFIG_SYS_DDR_CONTROL_2_1333
 210 #define CONFIG_SYS_DDR_TIMING_4 CONFIG_SYS_DDR_TIMING_4_1333
 211 #define CONFIG_SYS_DDR_TIMING_5 CONFIG_SYS_DDR_TIMING_5_1333
 212 #else
 213 #define CONFIG_SYS_DDR_CS0_CONFIG CONFIG_SYS_DDR_CS0_CONFIG_800
 214 #define CONFIG_SYS_DDR_CONTROL          CONFIG_SYS_DDR_CONTROL_800
 215 #define CONFIG_SYS_DDR_CONTROL_2        CONFIG_SYS_DDR_CONTROL_2_800
 216 #define CONFIG_SYS_DDR_TIMING_4 CONFIG_SYS_DDR_TIMING_4_800
 217 #define CONFIG_SYS_DDR_TIMING_5 CONFIG_SYS_DDR_TIMING_5_800
 218 #endif
 219
 220
 221 /* relocated CCSRBAR */
 222 #define CONFIG_SYS_CCSRBAR      CONFIG_SYS_CCSRBAR_DEFAULT
 223 #define CONFIG_SYS_CCSRBAR_PHYS_LOW     CONFIG_SYS_CCSRBAR_DEFAULT
 224
 225 #define CONFIG_SYS_IMMR         CONFIG_SYS_CCSRBAR
 226
 227 /* DSP CCSRBAR */
 228 #define CONFIG_SYS_FSL_DSP_CCSRBAR      CONFIG_SYS_FSL_DSP_CCSRBAR_DEFAULT
 229 #define CONFIG_SYS_FSL_DSP_CCSRBAR_PHYS CONFIG_SYS_FSL_DSP_CCSRBAR_DEFAULT
 230
 231 /*
 232  * IFC Definitions
 233  */
 234 /* NOR Flash on IFC */
 235
 236 #ifdef CONFIG_SPL_BUILD
 237 #define CONFIG_SYS_NO_FLASH
 238 #endif
 239 #define CONFIG_SYS_FLASH_BASE           0x88000000
 240 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* Max number of sector: 32M */
 241
 242 #define CONFIG_SYS_FLASH_BASE_PHYS      CONFIG_SYS_FLASH_BASE
 243
 244 #define CONFIG_SYS_NOR_CSPR     0x88000101
 245 #define CONFIG_SYS_NOR_AMASK    IFC_AMASK(128*1024*1024)
 246 #define CONFIG_SYS_NOR_CSOR     CSOR_NOR_ADM_SHIFT(5)
 247 /* NOR Flash Timing Params */
 248
 249 #define CONFIG_SYS_NOR_FTIM0    (FTIM0_NOR_TACSE(0x01) \
 250                                 | FTIM0_NOR_TEADC(0x03) \
 251                                 | FTIM0_NOR_TAVDS(0x00) \
 252                                 | FTIM0_NOR_TEAHC(0x0f))
 253 #define CONFIG_SYS_NOR_FTIM1    (FTIM1_NOR_TACO(0x1d) \
 254                                 | FTIM1_NOR_TRAD_NOR(0x09) \
 255                                 | FTIM1_NOR_TSEQRAD_NOR(0x09))
 256 #define CONFIG_SYS_NOR_FTIM2    (FTIM2_NOR_TCS(0x1) \
 257                                 | FTIM2_NOR_TCH(0x4) \
 258                                 | FTIM2_NOR_TWPH(0x7) \
 259                                 | FTIM2_NOR_TWP(0x1e))
 260 #define CONFIG_SYS_NOR_FTIM3    0x0
 261
 262 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS}
 263 #define CONFIG_SYS_FLASH_QUIET_TEST
 264 #define CONFIG_FLASH_SHOW_PROGRESS      45      /* count down from 45/5: 9..1 */
 265 #define CONFIG_SYS_MAX_FLASH_BANKS      1       /* number of banks */
 266
 267 #undef CONFIG_SYS_FLASH_CHECKSUM
 268 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 269 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 270
 271 /* CFI for NOR Flash */
 272 #define CONFIG_FLASH_CFI_DRIVER
 273 #define CONFIG_SYS_FLASH_CFI
 274 #define CONFIG_SYS_FLASH_EMPTY_INFO
 275 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 276
 277 /* NAND Flash on IFC */
 278 #define CONFIG_SYS_NAND_BASE            0xff800000
 279 #define CONFIG_SYS_NAND_BASE_PHYS       CONFIG_SYS_NAND_BASE
 280
 281 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 282                                 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
 283                                 | CSPR_MSEL_NAND        /* MSEL = NAND */ \
 284                                 | CSPR_V)
 285 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64*1024)
 286
 287 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 288                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 289                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
 290                                 | CSOR_NAND_RAL_2       /* RAL = 2Byes */ \
 291                                 | CSOR_NAND_PGS_2K      /* Page Size = 2K */ \
 292                                 | CSOR_NAND_SPRZ_64/* Spare size = 64 */ \
 293                                 | CSOR_NAND_PB(64))     /*Pages Per Block = 64*/
 294
 295 /* NAND Flash Timing Params */
 296 #define CONFIG_SYS_NAND_FTIM0           (FTIM0_NAND_TCCST(0x03) \
 297                                         | FTIM0_NAND_TWP(0x05) \
 298                                         | FTIM0_NAND_TWCHT(0x02) \
 299                                         | FTIM0_NAND_TWH(0x04))
 300 #define CONFIG_SYS_NAND_FTIM1           (FTIM1_NAND_TADLE(0x1c) \
 301                                         | FTIM1_NAND_TWBE(0x1e) \
 302                                         | FTIM1_NAND_TRR(0x07) \
 303                                         | FTIM1_NAND_TRP(0x05))
 304 #define CONFIG_SYS_NAND_FTIM2           (FTIM2_NAND_TRAD(0x08) \
 305                                         | FTIM2_NAND_TREH(0x04) \
 306                                         | FTIM2_NAND_TWHRE(0x11))
 307 #define CONFIG_SYS_NAND_FTIM3           FTIM3_NAND_TWW(0x04)
 308
 309 #define CONFIG_SYS_NAND_DDR_LAW         11
 310
 311 /* NAND */
 312 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
 313 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 314 #define CONFIG_MTD_NAND_VERIFY_WRITE
 315 #define CONFIG_CMD_NAND
 316
 317 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128 * 1024)
 318
 319 #ifndef CONFIG_SPL_BUILD
 320 #define CONFIG_FSL_QIXIS
 321 #endif
 322 #ifdef CONFIG_FSL_QIXIS
 323 #define CONFIG_SYS_FPGA_BASE    0xffb00000
 324 #define CONFIG_SYS_I2C_FPGA_ADDR        0x66
 325 #define QIXIS_BASE      CONFIG_SYS_FPGA_BASE
 326 #define QIXIS_LBMAP_SWITCH      9
 327 #define QIXIS_LBMAP_MASK        0x07
 328 #define QIXIS_LBMAP_SHIFT       0
 329 #define QIXIS_LBMAP_DFLTBANK            0x00
 330 #define QIXIS_LBMAP_ALTBANK             0x04
 331 #define QIXIS_RST_CTL_RESET             0x83
 332 #define QIXIS_RCFG_CTL_RECONFIG_IDLE    0x20
 333 #define QIXIS_RCFG_CTL_RECONFIG_START   0x21
 334 #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE   0x08
 335
 336 #define CONFIG_SYS_FPGA_BASE_PHYS       CONFIG_SYS_FPGA_BASE
 337
 338 #define CONFIG_SYS_CSPR2                (CSPR_PHYS_ADDR(CONFIG_SYS_FPGA_BASE) \
 339                                         | CSPR_PORT_SIZE_8 \
 340                                         | CSPR_MSEL_GPCM \
 341                                         | CSPR_V)
 342 #define CONFIG_SYS_AMASK2               IFC_AMASK(64*1024)
 343 #define CONFIG_SYS_CSOR2                0x0
 344 /* CPLD Timing parameters for IFC CS3 */
 345 #define CONFIG_SYS_CS2_FTIM0            (FTIM0_GPCM_TACSE(0x0e) | \
 346                                         FTIM0_GPCM_TEADC(0x0e) | \
 347                                         FTIM0_GPCM_TEAHC(0x0e))
 348 #define CONFIG_SYS_CS2_FTIM1            (FTIM1_GPCM_TACO(0x0e) | \
 349                                         FTIM1_GPCM_TRAD(0x1f))
 350 #define CONFIG_SYS_CS2_FTIM2            (FTIM2_GPCM_TCS(0x0e) | \
 351                                         FTIM2_GPCM_TCH(0x0) | \
 352                                         FTIM2_GPCM_TWP(0x1f))
 353 #define CONFIG_SYS_CS2_FTIM3            0x0
 354 #endif
 355
 356 /* Set up IFC registers for boot location NOR/NAND */
 357 #if defined(CONFIG_NAND)
 358 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
 359 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
 360 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
 361 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
 362 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
 363 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
 364 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
 365 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR_CSPR
 366 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
 367 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 368 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 369 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 370 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 371 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 372 #else
 373 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR_CSPR
 374 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 375 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 376 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 377 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 378 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 379 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 380 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NAND_CSPR
 381 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NAND_AMASK
 382 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NAND_CSOR
 383 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NAND_FTIM0
 384 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NAND_FTIM1
 385 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NAND_FTIM2
 386 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NAND_FTIM3
 387 #endif
 388
 389 #define CONFIG_BOARD_EARLY_INIT_F       /* Call board_pre_init */
 390 #define CONFIG_BOARD_EARLY_INIT_R
 391
 392 #define CONFIG_SYS_INIT_RAM_LOCK
 393 #define CONFIG_SYS_INIT_RAM_ADDR        0xffd00000      /* stack in RAM */
 394 #define CONFIG_SYS_INIT_RAM_END         0x00004000 /* End of used area in RAM */
 395
 396 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_END \
 397                                                 - GENERATED_GBL_DATA_SIZE)
 398 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 399
 400 #define CONFIG_SYS_MONITOR_LEN          (256 * 1024) /* Reserve 256 kB for Mon*/
 401 #define CONFIG_SYS_MALLOC_LEN           (1024 * 1024)   /* Reserved for malloc*/
 402
 403 /* Serial Port */
 404 #define CONFIG_CONS_INDEX       1
 405 #undef  CONFIG_SERIAL_SOFTWARE_FIFO
 406 #define CONFIG_SYS_NS16550
 407 #define CONFIG_SYS_NS16550_SERIAL
 408 #define CONFIG_SYS_NS16550_REG_SIZE     1
 409 #define CONFIG_SYS_NS16550_CLK          get_bus_freq(0)
 410 #ifdef CONFIG_SPL_BUILD
 411 #define CONFIG_NS16550_MIN_FUNCTIONS
 412 #endif
 413
 414 #define CONFIG_SERIAL_MULTI     1 /* Enable both serial ports */
 415 #define CONFIG_SYS_CONSOLE_IS_IN_ENV    /* determine from environment */
 416
 417 #define CONFIG_SYS_BAUDRATE_TABLE       \
 418         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 419
 420 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR + 0x4500)
 421 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR + 0x4600)
 422 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR + 0x4700)
 423 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR + 0x4800)
 424
 425 /* Use the HUSH parser */
 426 #define CONFIG_SYS_HUSH_PARSER    /* hush parser */
 427 #ifdef  CONFIG_SYS_HUSH_PARSER
 428 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
 429 #endif
 430
 431 /*
 432  * Pass open firmware flat tree
 433  */
 434 #define CONFIG_OF_LIBFDT
 435 #define CONFIG_OF_BOARD_SETUP
 436 #define CONFIG_OF_STDOUT_VIA_ALIAS
 437
 438 /* new uImage format support */
 439 #define CONFIG_FIT
 440 #define CONFIG_FIT_VERBOSE      /* enable fit_format_{error,warning}() */
 441
 442 #define CONFIG_SYS_I2C
 443 #define CONFIG_SYS_I2C_FSL
 444 #define CONFIG_SYS_FSL_I2C_SPEED        400800 /* I2C speed and slave address*/
 445 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 446 #define CONFIG_SYS_FSL_I2C2_SPEED       400800 /* I2C speed and slave address*/
 447 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
 448 #define CONFIG_SYS_FSL_I2C_OFFSET       0x3000
 449 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x3100
 450
 451 /* I2C EEPROM */
 452 #define CONFIG_ID_EEPROM
 453 #ifdef CONFIG_ID_EEPROM
 454 #define CONFIG_SYS_I2C_EEPROM_NXID
 455 #endif
 456 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x57
 457 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
 458 #define CONFIG_SYS_EEPROM_BUS_NUM       0
 459
 460 /* enable read and write access to EEPROM */
 461 #define CONFIG_CMD_EEPROM
 462 #define CONFIG_SYS_I2C_MULTI_EEPROMS
 463 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
 464 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
 465 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
 466
 467 /* I2C FPGA */
 468 #define CONFIG_I2C_FPGA
 469 #define CONFIG_SYS_I2C_FPGA_ADDR        0x66
 470
 471 #define CONFIG_RTC_DS3231
 472 #define CONFIG_SYS_I2C_RTC_ADDR         0x68
 473
 474 /*
 475  * SPI interface will not be available in case of NAND boot SPI CS0 will be
 476  * used for SLIC
 477  */
 478 /* eSPI - Enhanced SPI */
 479 #define CONFIG_FSL_ESPI  /* SPI */
 480 #ifdef CONFIG_FSL_ESPI
 481 #define CONFIG_SPI_FLASH
 482 #define CONFIG_SPI_FLASH_SPANSION
 483 #define CONFIG_CMD_SF
 484 #define CONFIG_SF_DEFAULT_SPEED         10000000
 485 #define CONFIG_SF_DEFAULT_MODE          SPI_MODE_0
 486 #endif
 487
 488 #if defined(CONFIG_TSEC_ENET)
 489
 490 #define CONFIG_MII                      /* MII PHY management */
 491 #define CONFIG_MII_DEFAULT_TSEC 1       /* Allow unregistered phys */
 492 #define CONFIG_TSEC1    1
 493 #define CONFIG_TSEC1_NAME       "eTSEC1"
 494 #define CONFIG_TSEC2    1
 495 #define CONFIG_TSEC2_NAME       "eTSEC2"
 496
 497 #define TSEC1_PHY_ADDR          0
 498 #define TSEC2_PHY_ADDR          1
 499
 500 #define TSEC1_FLAGS             (TSEC_GIGABIT | TSEC_REDUCED)
 501 #define TSEC2_FLAGS             (TSEC_GIGABIT | TSEC_REDUCED)
 502
 503 #define TSEC1_PHYIDX            0
 504 #define TSEC2_PHYIDX            0
 505
 506 #define CONFIG_ETHPRIME         "eTSEC1"
 507
 508 #define CONFIG_PHY_GIGE         /* Include GbE speed/duplex detection */
 509
 510 /* TBI PHY configuration for SGMII mode */
 511 #define CONFIG_TSEC_TBICR_SETTINGS ( \
 512                 TBICR_PHY_RESET \
 513                 | TBICR_ANEG_ENABLE \
 514                 | TBICR_FULL_DUPLEX \
 515                 | TBICR_SPEED1_SET \
 516                 )
 517
 518 #endif  /* CONFIG_TSEC_ENET */
 519
 520 #define CONFIG_MMC
 521 #ifdef CONFIG_MMC
 522 #define CONFIG_CMD_MMC
 523 #define CONFIG_DOS_PARTITION
 524 #define CONFIG_FSL_ESDHC
 525 #define CONFIG_GENERIC_MMC
 526 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 527 #endif
 528
 529 #define CONFIG_USB_EHCI  /* USB */
 530 #ifdef CONFIG_USB_EHCI
 531 #define CONFIG_CMD_USB
 532 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 533 #define CONFIG_USB_EHCI_FSL
 534 #define CONFIG_USB_STORAGE
 535 #define CONFIG_HAS_FSL_DR_USB
 536 #endif
 537
 538 /*
 539  * Environment
 540  */
 541 #if defined(CONFIG_RAMBOOT_SDCARD)
 542 #define CONFIG_ENV_IS_IN_MMC
 543 #define CONFIG_SYS_MMC_ENV_DEV          0
 544 #define CONFIG_ENV_SIZE                 0x2000
 545 #elif defined(CONFIG_RAMBOOT_SPIFLASH)
 546 #define CONFIG_ENV_IS_IN_SPI_FLASH
 547 #define CONFIG_ENV_SPI_BUS      0
 548 #define CONFIG_ENV_SPI_CS       0
 549 #define CONFIG_ENV_SPI_MAX_HZ   10000000
 550 #define CONFIG_ENV_SPI_MODE     0
 551 #define CONFIG_ENV_OFFSET       0x100000        /* 1MB */
 552 #define CONFIG_ENV_SECT_SIZE    0x10000
 553 #define CONFIG_ENV_SIZE         0x2000
 554 #elif defined(CONFIG_NAND)
 555 #define CONFIG_ENV_IS_IN_NAND
 556 #define CONFIG_ENV_SIZE         CONFIG_SYS_NAND_BLOCK_SIZE
 557 #define CONFIG_ENV_OFFSET       ((512 * 1024) + CONFIG_SYS_NAND_BLOCK_SIZE)
 558 #define CONFIG_ENV_RANGE        (3 * CONFIG_ENV_SIZE)
 559 #elif defined(CONFIG_SYS_RAMBOOT)
 560 #define CONFIG_ENV_IS_NOWHERE           /* Store ENV in memory only */
 561 #define CONFIG_ENV_ADDR                 (CONFIG_SYS_MONITOR_BASE - 0x1000)
 562 #define CONFIG_ENV_SIZE                 0x2000
 563 #else
 564 #define CONFIG_ENV_IS_IN_FLASH
 565 #if CONFIG_SYS_MONITOR_BASE > 0xfff80000
 566 #define CONFIG_ENV_ADDR 0xfff80000
 567 #else
 568 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 569 #endif
 570 #define CONFIG_ENV_SIZE         0x2000
 571 #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
 572 #endif
 573
 574 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
 575 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 576
 577 /*
 578  * Command line configuration.
 579  */
 580 #include <config_cmd_default.h>
 581
 582 #define CONFIG_CMD_DATE
 583 #define CONFIG_CMD_DHCP
 584 #define CONFIG_CMD_ELF
 585 #define CONFIG_CMD_ERRATA
 586 #define CONFIG_CMD_I2C
 587 #define CONFIG_CMD_IRQ
 588 #define CONFIG_CMD_MII
 589 #define CONFIG_CMD_PING
 590 #define CONFIG_CMD_SETEXPR
 591 #define CONFIG_CMD_REGINFO
 592
 593 #if defined(CONFIG_MMC) || defined(CONFIG_USB_EHCI)
 594 #define CONFIG_CMD_EXT2
 595 #define CONFIG_CMD_FAT
 596 #define CONFIG_DOS_PARTITION
 597 #endif
 598
 599 /*
 600  * Miscellaneous configurable options
 601  */
 602 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 603 #define CONFIG_CMDLINE_EDITING                  /* Command-line editing */
 604 #define CONFIG_AUTO_COMPLETE                    /* add autocompletion support */
 605 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 606
 607 #if defined(CONFIG_CMD_KGDB)
 608 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size */
 609 #else
 610 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size */
 611 #endif
 612 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 613                                                 /* Print Buffer Size */
 614 #define CONFIG_SYS_MAXARGS      16              /* max number of command args */
 615 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
 616
 617
 618 /*
 619  * For booting Linux, the board info and command line data
 620  * have to be in the first 64 MB of memory, since this is
 621  * the maximum mapped by the Linux kernel during initialization.
 622  */
 623 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20) /* Initial Memory map for Linux */
 624 #define CONFIG_SYS_BOOTM_LEN    (64 << 20) /* Increase max gunzip size */
 625
 626 #if defined(CONFIG_CMD_KGDB)
 627 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 628 #define CONFIG_KGDB_SER_INDEX   2       /* which serial port to use */
 629 #endif
 630
 631 /*
 632  * Environment Configuration
 633  */
 634
 635 #if defined(CONFIG_TSEC_ENET)
 636 #define CONFIG_HAS_ETH0
 637 #define CONFIG_HAS_ETH1
 638 #endif
 639
 640 #define CONFIG_HOSTNAME         BSC9132qds
 641 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 642 #define CONFIG_BOOTFILE         "uImage"
 643 #define CONFIG_UBOOTPATH        "u-boot.bin"
 644
 645 #define CONFIG_BAUDRATE         115200
 646
 647 #ifdef CONFIG_SDCARD
 648 #define CONFIG_DEF_HWCONFIG     "hwconfig=usb1:dr_mode=host,phy_type=ulpi\0"
 649 #else
 650 #define CONFIG_DEF_HWCONFIG     "hwconfig=sim;usb1:dr_mode=host,phy_type=ulpi\0"
 651 #endif
 652
 653 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 654         "netdev=eth0\0"                                         \
 655         "uboot=" CONFIG_UBOOTPATH "\0"                          \
 656         "loadaddr=1000000\0"                    \
 657         "bootfile=uImage\0"     \
 658         "consoledev=ttyS0\0"                            \
 659         "ramdiskaddr=2000000\0"                 \
 660         "ramdiskfile=rootfs.ext2.gz.uboot\0"            \
 661         "fdtaddr=c00000\0"                              \
 662         "fdtfile=bsc9132qds.dtb\0"              \
 663         "bdev=sda1\0"   \
 664         CONFIG_DEF_HWCONFIG\
 665         "othbootargs=mem=880M ramdisk_size=600000 " \
 666                 "default_hugepagesz=256m hugepagesz=256m hugepages=1 " \
 667                 "isolcpus=0\0" \
 668         "usbext2boot=setenv bootargs root=/dev/ram rw " \
 669                 "console=$consoledev,$baudrate $othbootargs; "  \
 670                 "usb start;"                    \
 671                 "ext2load usb 0:4 $loadaddr $bootfile;"         \
 672                 "ext2load usb 0:4 $fdtaddr $fdtfile;"   \
 673                 "ext2load usb 0:4 $ramdiskaddr $ramdiskfile;"   \
 674                 "bootm $loadaddr $ramdiskaddr $fdtaddr\0"       \
 675         "debug_halt_off=mw ff7e0e30 0xf0000000;"
 676
 677 #define CONFIG_NFSBOOTCOMMAND   \
 678         "setenv bootargs root=/dev/nfs rw "     \
 679         "nfsroot=$serverip:$rootpath "  \
 680         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 681         "console=$consoledev,$baudrate $othbootargs;" \
 682         "tftp $loadaddr $bootfile;"     \
 683         "tftp $fdtaddr $fdtfile;"       \
 684         "bootm $loadaddr - $fdtaddr"
 685
 686 #define CONFIG_HDBOOT   \
 687         "setenv bootargs root=/dev/$bdev rw rootdelay=30 "      \
 688         "console=$consoledev,$baudrate $othbootargs;" \
 689         "usb start;"    \
 690         "ext2load usb 0:1 $loadaddr /boot/$bootfile;"   \
 691         "ext2load usb 0:1 $fdtaddr /boot/$fdtfile;"     \
 692         "bootm $loadaddr - $fdtaddr"
 693
 694 #define CONFIG_RAMBOOTCOMMAND           \
 695         "setenv bootargs root=/dev/ram rw "     \
 696         "console=$consoledev,$baudrate $othbootargs; "  \
 697         "tftp $ramdiskaddr $ramdiskfile;"       \
 698         "tftp $loadaddr $bootfile;"             \
 699         "tftp $fdtaddr $fdtfile;"               \
 700         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 701
 702 #define CONFIG_BOOTCOMMAND CONFIG_RAMBOOTCOMMAND
 703
 704 #endif  /* __CONFIG_H */