include/configs/BSC9132QDS.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright 2013 Freescale Semiconductor, Inc.
   4  */
   5
   6 /*
   7  * BSC9132 QDS board configuration file
   8  */
   9
  10 #ifndef __CONFIG_H
  11 #define __CONFIG_H
  12
  13 #ifdef CONFIG_SDCARD
  14 #define CONFIG_RAMBOOT_SDCARD
  15 #define CONFIG_SYS_RAMBOOT
  16 #define CONFIG_RESET_VECTOR_ADDRESS     0x110bfffc
  17 #endif
  18 #ifdef CONFIG_SPIFLASH
  19 #define CONFIG_RAMBOOT_SPIFLASH
  20 #define CONFIG_SYS_RAMBOOT
  21 #define CONFIG_RESET_VECTOR_ADDRESS     0x110bfffc
  22 #endif
  23 #ifdef CONFIG_NAND_SECBOOT
  24 #define CONFIG_RAMBOOT_NAND
  25 #define CONFIG_SYS_RAMBOOT
  26 #define CONFIG_RESET_VECTOR_ADDRESS     0x110bfffc
  27 #endif
  28
  29 #ifdef CONFIG_NAND
  30 #define CONFIG_SPL_INIT_MINIMAL
  31 #define CONFIG_SPL_FLUSH_IMAGE
  32 #define CONFIG_SPL_TARGET               "u-boot-with-spl.bin"
  33
  34 #define CONFIG_SPL_MAX_SIZE             8192
  35 #define CONFIG_SPL_RELOC_TEXT_BASE      0x00100000
  36 #define CONFIG_SPL_RELOC_STACK          0x00100000
  37 #define CONFIG_SYS_NAND_U_BOOT_SIZE     ((768 << 10) - 0x2000)
  38 #define CONFIG_SYS_NAND_U_BOOT_DST      (0x00200000 - CONFIG_SPL_MAX_SIZE)
  39 #define CONFIG_SYS_NAND_U_BOOT_START    0x00200000
  40 #define CONFIG_SYS_NAND_U_BOOT_OFFS     0
  41 #endif
  42
  43 #ifndef CONFIG_RESET_VECTOR_ADDRESS
  44 #define CONFIG_RESET_VECTOR_ADDRESS     0x8ffffffc
  45 #endif
  46
  47 #ifdef CONFIG_SPL_BUILD
  48 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
  49 #else
  50 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
  51 #endif
  52
  53 /* High Level Configuration Options */
  54 #define CONFIG_SYS_HAS_SERDES           /* common SERDES init code */
  55
  56 #if defined(CONFIG_PCI)
  57 #define CONFIG_PCIE1                    /* PCIE controller 1 (slot 1) */
  58 #define CONFIG_FSL_PCI_INIT             /* Use common FSL init code */
  59 #define CONFIG_PCI_INDIRECT_BRIDGE      /* indirect PCI bridge support */
  60 #define CONFIG_SYS_PCI_64BIT            /* enable 64-bit PCI resources */
  61
  62 /*
  63  * PCI Windows
  64  * Memory space is mapped 1-1, but I/O space must start from 0.
  65  */
  66 /* controller 1, Slot 1, tgtid 1, Base address a000 */
  67 #define CONFIG_SYS_PCIE1_NAME           "PCIe Slot"
  68 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x90000000
  69 #define CONFIG_SYS_PCIE1_MEM_BUS        0x90000000
  70 #define CONFIG_SYS_PCIE1_MEM_PHYS       0x90000000
  71 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x10000000      /* 256M */
  72 #define CONFIG_SYS_PCIE1_IO_VIRT        0xC0010000
  73 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
  74 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
  75 #define CONFIG_SYS_PCIE1_IO_PHYS        0xC0010000
  76
  77 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
  78 #endif
  79
  80 #define CONFIG_ENV_OVERWRITE
  81
  82 #if defined(CONFIG_SYS_CLK_100_DDR_100)
  83 #define CONFIG_SYS_CLK_FREQ     100000000
  84 #define CONFIG_DDR_CLK_FREQ     100000000
  85 #elif defined(CONFIG_SYS_CLK_100_DDR_133)
  86 #define CONFIG_SYS_CLK_FREQ     100000000
  87 #define CONFIG_DDR_CLK_FREQ     133000000
  88 #endif
  89
  90 #define CONFIG_HWCONFIG
  91 /*
  92  * These can be toggled for performance analysis, otherwise use default.
  93  */
  94 #define CONFIG_L2_CACHE                 /* toggle L2 cache */
  95 #define CONFIG_BTB                      /* enable branch predition */
  96
  97 #define CONFIG_SYS_MEMTEST_START        0x01000000      /* memtest works on */
  98 #define CONFIG_SYS_MEMTEST_END          0x01ffffff
  99
 100 /* DDR Setup */
 101 #define CONFIG_SYS_SPD_BUS_NUM          0
 102 #define SPD_EEPROM_ADDRESS1             0x54 /* I2C access */
 103 #define SPD_EEPROM_ADDRESS2             0x56 /* I2C access */
 104
 105 #define CONFIG_MEM_INIT_VALUE           0xDeadBeef
 106
 107 #define CONFIG_SYS_SDRAM_SIZE           (1024)
 108 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 109 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 110
 111 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 112
 113 /* DDR3 Controller Settings */
 114 #define CONFIG_CHIP_SELECTS_PER_CTRL    1
 115 #define CONFIG_SYS_DDR_CS0_BNDS         0x0000003F
 116 #define CONFIG_SYS_DDR_CS0_CONFIG_1333  0x80004302
 117 #define CONFIG_SYS_DDR_CS0_CONFIG_800   0x80014302
 118 #define CONFIG_SYS_DDR_CS0_CONFIG_2     0x00000000
 119 #define CONFIG_SYS_DDR_DATA_INIT        0xdeadbeef
 120 #define CONFIG_SYS_DDR_INIT_ADDR        0x00000000
 121 #define CONFIG_SYS_DDR_INIT_EXT_ADDR    0x00000000
 122 #define CONFIG_SYS_DDR_MODE_CONTROL     0x00000000
 123 #define CONFIG_SYS_DDR1_CS0_BNDS       0x0040007F
 124
 125 #define CONFIG_SYS_DDR_ZQ_CONTROL       0x89080600
 126 #define CONFIG_SYS_DDR_SR_CNTR          0x00000000
 127 #define CONFIG_SYS_DDR_RCW_1            0x00000000
 128 #define CONFIG_SYS_DDR_RCW_2            0x00000000
 129 #define CONFIG_SYS_DDR_CONTROL_800              0x470C0000
 130 #define CONFIG_SYS_DDR_CONTROL_2_800    0x04401050
 131 #define CONFIG_SYS_DDR_TIMING_4_800             0x00220001
 132 #define CONFIG_SYS_DDR_TIMING_5_800             0x03402400
 133
 134 #define CONFIG_SYS_DDR_CONTROL_1333             0x470C0008
 135 #define CONFIG_SYS_DDR_CONTROL_2_1333   0x24401010
 136 #define CONFIG_SYS_DDR_TIMING_4_1333            0x00000001
 137 #define CONFIG_SYS_DDR_TIMING_5_1333            0x03401400
 138
 139 #define CONFIG_SYS_DDR_TIMING_3_800             0x00020000
 140 #define CONFIG_SYS_DDR_TIMING_0_800             0x00330004
 141 #define CONFIG_SYS_DDR_TIMING_1_800             0x6f6B4846
 142 #define CONFIG_SYS_DDR_TIMING_2_800             0x0FA8C8CF
 143 #define CONFIG_SYS_DDR_CLK_CTRL_800             0x03000000
 144 #define CONFIG_SYS_DDR_MODE_1_800               0x40461520
 145 #define CONFIG_SYS_DDR_MODE_2_800               0x8000c000
 146 #define CONFIG_SYS_DDR_INTERVAL_800             0x0C300000
 147 #define CONFIG_SYS_DDR_WRLVL_CONTROL_800        0x8655A608
 148
 149 #define CONFIG_SYS_DDR_TIMING_3_1333            0x01061000
 150 #define CONFIG_SYS_DDR_TIMING_0_1333            0x00440104
 151 #define CONFIG_SYS_DDR_TIMING_1_1333            0x98913A45
 152 #define CONFIG_SYS_DDR_TIMING_2_1333            0x0FB8B114
 153 #define CONFIG_SYS_DDR_CLK_CTRL_1333            0x02800000
 154 #define CONFIG_SYS_DDR_MODE_1_1333              0x00061A50
 155 #define CONFIG_SYS_DDR_MODE_2_1333              0x00100000
 156 #define CONFIG_SYS_DDR_INTERVAL_1333            0x144E0513
 157 #define CONFIG_SYS_DDR_WRLVL_CONTROL_1333       0x8655F607
 158
 159 /*FIXME: the following params are constant w.r.t diff freq
 160 combinations. this should be removed later
 161 */
 162 #if CONFIG_DDR_CLK_FREQ == 100000000
 163 #define CONFIG_SYS_DDR_CS0_CONFIG CONFIG_SYS_DDR_CS0_CONFIG_800
 164 #define CONFIG_SYS_DDR_CONTROL          CONFIG_SYS_DDR_CONTROL_800
 165 #define CONFIG_SYS_DDR_CONTROL_2 CONFIG_SYS_DDR_CONTROL_2_800
 166 #define CONFIG_SYS_DDR_TIMING_4 CONFIG_SYS_DDR_TIMING_4_800
 167 #define CONFIG_SYS_DDR_TIMING_5 CONFIG_SYS_DDR_TIMING_5_800
 168 #elif CONFIG_DDR_CLK_FREQ == 133000000
 169 #define CONFIG_SYS_DDR_CS0_CONFIG CONFIG_SYS_DDR_CS0_CONFIG_1333
 170 #define CONFIG_SYS_DDR_CONTROL          CONFIG_SYS_DDR_CONTROL_1333
 171 #define CONFIG_SYS_DDR_CONTROL_2        CONFIG_SYS_DDR_CONTROL_2_1333
 172 #define CONFIG_SYS_DDR_TIMING_4 CONFIG_SYS_DDR_TIMING_4_1333
 173 #define CONFIG_SYS_DDR_TIMING_5 CONFIG_SYS_DDR_TIMING_5_1333
 174 #else
 175 #define CONFIG_SYS_DDR_CS0_CONFIG CONFIG_SYS_DDR_CS0_CONFIG_800
 176 #define CONFIG_SYS_DDR_CONTROL          CONFIG_SYS_DDR_CONTROL_800
 177 #define CONFIG_SYS_DDR_CONTROL_2        CONFIG_SYS_DDR_CONTROL_2_800
 178 #define CONFIG_SYS_DDR_TIMING_4 CONFIG_SYS_DDR_TIMING_4_800
 179 #define CONFIG_SYS_DDR_TIMING_5 CONFIG_SYS_DDR_TIMING_5_800
 180 #endif
 181
 182 /* relocated CCSRBAR */
 183 #define CONFIG_SYS_CCSRBAR      CONFIG_SYS_CCSRBAR_DEFAULT
 184 #define CONFIG_SYS_CCSRBAR_PHYS_LOW     CONFIG_SYS_CCSRBAR_DEFAULT
 185
 186 #define CONFIG_SYS_IMMR         CONFIG_SYS_CCSRBAR
 187
 188 /* DSP CCSRBAR */
 189 #define CONFIG_SYS_FSL_DSP_CCSRBAR      CONFIG_SYS_FSL_DSP_CCSRBAR_DEFAULT
 190 #define CONFIG_SYS_FSL_DSP_CCSRBAR_PHYS CONFIG_SYS_FSL_DSP_CCSRBAR_DEFAULT
 191
 192 /*
 193  * IFC Definitions
 194  */
 195 /* NOR Flash on IFC */
 196
 197 #define CONFIG_SYS_FLASH_BASE           0x88000000
 198 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* Max number of sector: 32M */
 199
 200 #define CONFIG_SYS_FLASH_BASE_PHYS      CONFIG_SYS_FLASH_BASE
 201
 202 #define CONFIG_SYS_NOR_CSPR     0x88000101
 203 #define CONFIG_SYS_NOR_AMASK    IFC_AMASK(128*1024*1024)
 204 #define CONFIG_SYS_NOR_CSOR     CSOR_NOR_ADM_SHIFT(5)
 205 /* NOR Flash Timing Params */
 206
 207 #define CONFIG_SYS_NOR_FTIM0    (FTIM0_NOR_TACSE(0x01) \
 208                                 | FTIM0_NOR_TEADC(0x03) \
 209                                 | FTIM0_NOR_TAVDS(0x00) \
 210                                 | FTIM0_NOR_TEAHC(0x0f))
 211 #define CONFIG_SYS_NOR_FTIM1    (FTIM1_NOR_TACO(0x1d) \
 212                                 | FTIM1_NOR_TRAD_NOR(0x09) \
 213                                 | FTIM1_NOR_TSEQRAD_NOR(0x09))
 214 #define CONFIG_SYS_NOR_FTIM2    (FTIM2_NOR_TCS(0x1) \
 215                                 | FTIM2_NOR_TCH(0x4) \
 216                                 | FTIM2_NOR_TWPH(0x7) \
 217                                 | FTIM2_NOR_TWP(0x1e))
 218 #define CONFIG_SYS_NOR_FTIM3    0x0
 219
 220 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS}
 221 #define CONFIG_SYS_FLASH_QUIET_TEST
 222 #define CONFIG_FLASH_SHOW_PROGRESS      45      /* count down from 45/5: 9..1 */
 223 #define CONFIG_SYS_MAX_FLASH_BANKS      1       /* number of banks */
 224
 225 #undef CONFIG_SYS_FLASH_CHECKSUM
 226 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 227 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 228
 229 /* CFI for NOR Flash */
 230 #define CONFIG_SYS_FLASH_EMPTY_INFO
 231
 232 /* NAND Flash on IFC */
 233 #define CONFIG_SYS_NAND_BASE            0xff800000
 234 #define CONFIG_SYS_NAND_BASE_PHYS       CONFIG_SYS_NAND_BASE
 235
 236 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 237                                 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
 238                                 | CSPR_MSEL_NAND        /* MSEL = NAND */ \
 239                                 | CSPR_V)
 240 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64*1024)
 241
 242 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 243                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 244                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
 245                                 | CSOR_NAND_RAL_2       /* RAL = 2Byes */ \
 246                                 | CSOR_NAND_PGS_2K      /* Page Size = 2K */ \
 247                                 | CSOR_NAND_SPRZ_64/* Spare size = 64 */ \
 248                                 | CSOR_NAND_PB(64))     /*Pages Per Block = 64*/
 249
 250 /* NAND Flash Timing Params */
 251 #define CONFIG_SYS_NAND_FTIM0           (FTIM0_NAND_TCCST(0x03) \
 252                                         | FTIM0_NAND_TWP(0x05) \
 253                                         | FTIM0_NAND_TWCHT(0x02) \
 254                                         | FTIM0_NAND_TWH(0x04))
 255 #define CONFIG_SYS_NAND_FTIM1           (FTIM1_NAND_TADLE(0x1c) \
 256                                         | FTIM1_NAND_TWBE(0x1e) \
 257                                         | FTIM1_NAND_TRR(0x07) \
 258                                         | FTIM1_NAND_TRP(0x05))
 259 #define CONFIG_SYS_NAND_FTIM2           (FTIM2_NAND_TRAD(0x08) \
 260                                         | FTIM2_NAND_TREH(0x04) \
 261                                         | FTIM2_NAND_TWHRE(0x11))
 262 #define CONFIG_SYS_NAND_FTIM3           FTIM3_NAND_TWW(0x04)
 263
 264 #define CONFIG_SYS_NAND_DDR_LAW         11
 265
 266 /* NAND */
 267 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
 268 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 269
 270 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128 * 1024)
 271
 272 #ifndef CONFIG_SPL_BUILD
 273 #define CONFIG_FSL_QIXIS
 274 #endif
 275 #ifdef CONFIG_FSL_QIXIS
 276 #define CONFIG_SYS_FPGA_BASE    0xffb00000
 277 #define CONFIG_SYS_I2C_FPGA_ADDR        0x66
 278 #define QIXIS_BASE      CONFIG_SYS_FPGA_BASE
 279 #define QIXIS_LBMAP_SWITCH      9
 280 #define QIXIS_LBMAP_MASK        0x07
 281 #define QIXIS_LBMAP_SHIFT       0
 282 #define QIXIS_LBMAP_DFLTBANK            0x00
 283 #define QIXIS_LBMAP_ALTBANK             0x04
 284 #define QIXIS_RST_CTL_RESET             0x83
 285 #define QIXIS_RCFG_CTL_RECONFIG_IDLE    0x20
 286 #define QIXIS_RCFG_CTL_RECONFIG_START   0x21
 287 #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE   0x08
 288
 289 #define CONFIG_SYS_FPGA_BASE_PHYS       CONFIG_SYS_FPGA_BASE
 290
 291 #define CONFIG_SYS_CSPR2                (CSPR_PHYS_ADDR(CONFIG_SYS_FPGA_BASE) \
 292                                         | CSPR_PORT_SIZE_8 \
 293                                         | CSPR_MSEL_GPCM \
 294                                         | CSPR_V)
 295 #define CONFIG_SYS_AMASK2               IFC_AMASK(64*1024)
 296 #define CONFIG_SYS_CSOR2                0x0
 297 /* CPLD Timing parameters for IFC CS3 */
 298 #define CONFIG_SYS_CS2_FTIM0            (FTIM0_GPCM_TACSE(0x0e) | \
 299                                         FTIM0_GPCM_TEADC(0x0e) | \
 300                                         FTIM0_GPCM_TEAHC(0x0e))
 301 #define CONFIG_SYS_CS2_FTIM1            (FTIM1_GPCM_TACO(0x0e) | \
 302                                         FTIM1_GPCM_TRAD(0x1f))
 303 #define CONFIG_SYS_CS2_FTIM2            (FTIM2_GPCM_TCS(0x0e) | \
 304                                         FTIM2_GPCM_TCH(0x8) | \
 305                                         FTIM2_GPCM_TWP(0x1f))
 306 #define CONFIG_SYS_CS2_FTIM3            0x0
 307 #endif
 308
 309 /* Set up IFC registers for boot location NOR/NAND */
 310 #if defined(CONFIG_NAND) || defined(CONFIG_NAND_SECBOOT)
 311 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
 312 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
 313 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
 314 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
 315 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
 316 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
 317 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
 318 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR_CSPR
 319 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
 320 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 321 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 322 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 323 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 324 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 325 #else
 326 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR_CSPR
 327 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 328 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 329 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 330 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 331 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 332 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 333 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NAND_CSPR
 334 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NAND_AMASK
 335 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NAND_CSOR
 336 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NAND_FTIM0
 337 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NAND_FTIM1
 338 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NAND_FTIM2
 339 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NAND_FTIM3
 340 #endif
 341
 342 #define CONFIG_SYS_INIT_RAM_LOCK
 343 #define CONFIG_SYS_INIT_RAM_ADDR        0xffd00000      /* stack in RAM */
 344 #define CONFIG_SYS_INIT_RAM_SIZE        0x00004000 /* End of used area in RAM */
 345
 346 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE \
 347                                                 - GENERATED_GBL_DATA_SIZE)
 348 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 349
 350 #define CONFIG_SYS_MONITOR_LEN          (768 * 1024)
 351 #define CONFIG_SYS_MALLOC_LEN           (1024 * 1024)   /* Reserved for malloc*/
 352
 353 /* Serial Port */
 354 #undef  CONFIG_SERIAL_SOFTWARE_FIFO
 355 #define CONFIG_SYS_NS16550_SERIAL
 356 #define CONFIG_SYS_NS16550_REG_SIZE     1
 357 #define CONFIG_SYS_NS16550_CLK          get_bus_freq(0)
 358 #ifdef CONFIG_SPL_BUILD
 359 #define CONFIG_NS16550_MIN_FUNCTIONS
 360 #endif
 361
 362 #define CONFIG_SYS_BAUDRATE_TABLE       \
 363         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 364
 365 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR + 0x4500)
 366 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR + 0x4600)
 367 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR + 0x4700)
 368 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR + 0x4800)
 369
 370 #define CONFIG_SYS_I2C
 371 #define CONFIG_SYS_I2C_FSL
 372 #define CONFIG_SYS_FSL_I2C_SPEED        400800 /* I2C speed and slave address*/
 373 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 374 #define CONFIG_SYS_FSL_I2C2_SPEED       400800 /* I2C speed and slave address*/
 375 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
 376 #define CONFIG_SYS_FSL_I2C_OFFSET       0x3000
 377 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x3100
 378
 379 /* I2C EEPROM */
 380 #define CONFIG_ID_EEPROM
 381 #ifdef CONFIG_ID_EEPROM
 382 #define CONFIG_SYS_I2C_EEPROM_NXID
 383 #endif
 384 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x57
 385 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
 386 #define CONFIG_SYS_EEPROM_BUS_NUM       0
 387
 388 /* enable read and write access to EEPROM */
 389 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
 390 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
 391 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
 392
 393 /* I2C FPGA */
 394 #define CONFIG_I2C_FPGA
 395 #define CONFIG_SYS_I2C_FPGA_ADDR        0x66
 396
 397 #define CONFIG_RTC_DS3231
 398 #define CONFIG_SYS_I2C_RTC_ADDR         0x68
 399
 400 /*
 401  * SPI interface will not be available in case of NAND boot SPI CS0 will be
 402  * used for SLIC
 403  */
 404 /* eSPI - Enhanced SPI */
 405
 406 #if defined(CONFIG_TSEC_ENET)
 407
 408 #define CONFIG_MII_DEFAULT_TSEC 1       /* Allow unregistered phys */
 409 #define CONFIG_TSEC1    1
 410 #define CONFIG_TSEC1_NAME       "eTSEC1"
 411 #define CONFIG_TSEC2    1
 412 #define CONFIG_TSEC2_NAME       "eTSEC2"
 413
 414 #define TSEC1_PHY_ADDR          0
 415 #define TSEC2_PHY_ADDR          1
 416
 417 #define TSEC1_FLAGS             (TSEC_GIGABIT | TSEC_REDUCED)
 418 #define TSEC2_FLAGS             (TSEC_GIGABIT | TSEC_REDUCED)
 419
 420 #define TSEC1_PHYIDX            0
 421 #define TSEC2_PHYIDX            0
 422
 423 #define CONFIG_ETHPRIME         "eTSEC1"
 424
 425 /* TBI PHY configuration for SGMII mode */
 426 #define CONFIG_TSEC_TBICR_SETTINGS ( \
 427                 TBICR_PHY_RESET \
 428                 | TBICR_ANEG_ENABLE \
 429                 | TBICR_FULL_DUPLEX \
 430                 | TBICR_SPEED1_SET \
 431                 )
 432
 433 #endif  /* CONFIG_TSEC_ENET */
 434
 435 #ifdef CONFIG_MMC
 436 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 437 #endif
 438
 439 #ifdef CONFIG_USB_EHCI_HCD
 440 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 441 #define CONFIG_USB_EHCI_FSL
 442 #define CONFIG_HAS_FSL_DR_USB
 443 #endif
 444
 445 /*
 446  * Environment
 447  */
 448 #if defined(CONFIG_RAMBOOT_SDCARD)
 449 #define CONFIG_FSL_FIXED_MMC_LOCATION
 450 #define CONFIG_SYS_MMC_ENV_DEV          0
 451 #define CONFIG_ENV_SIZE                 0x2000
 452 #elif defined(CONFIG_RAMBOOT_SPIFLASH)
 453 #define CONFIG_ENV_OFFSET       0x100000        /* 1MB */
 454 #define CONFIG_ENV_SECT_SIZE    0x10000
 455 #define CONFIG_ENV_SIZE         0x2000
 456 #elif defined(CONFIG_NAND) || defined(CONFIG_NAND_SECBOOT)
 457 #define CONFIG_ENV_SIZE         CONFIG_SYS_NAND_BLOCK_SIZE
 458 #define CONFIG_ENV_OFFSET       ((768 * 1024) + CONFIG_SYS_NAND_BLOCK_SIZE)
 459 #define CONFIG_ENV_RANGE        (3 * CONFIG_ENV_SIZE)
 460 #elif defined(CONFIG_SYS_RAMBOOT)
 461 #define CONFIG_ENV_ADDR                 (CONFIG_SYS_MONITOR_BASE - 0x1000)
 462 #define CONFIG_ENV_SIZE                 0x2000
 463 #else
 464 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 465 #define CONFIG_ENV_SIZE         0x2000
 466 #define CONFIG_ENV_SECT_SIZE    0x20000
 467 #endif
 468
 469 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
 470 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 471
 472 /*
 473  * Miscellaneous configurable options
 474  */
 475 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 476
 477 /*
 478  * For booting Linux, the board info and command line data
 479  * have to be in the first 64 MB of memory, since this is
 480  * the maximum mapped by the Linux kernel during initialization.
 481  */
 482 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20) /* Initial Memory map for Linux */
 483 #define CONFIG_SYS_BOOTM_LEN    (64 << 20) /* Increase max gunzip size */
 484
 485 #if defined(CONFIG_CMD_KGDB)
 486 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 487 #endif
 488
 489 /*
 490  * Dynamic MTD Partition support with mtdparts
 491  */
 492 /*
 493  * Environment Configuration
 494  */
 495
 496 #if defined(CONFIG_TSEC_ENET)
 497 #define CONFIG_HAS_ETH0
 498 #define CONFIG_HAS_ETH1
 499 #endif
 500
 501 #define CONFIG_HOSTNAME         "BSC9132qds"
 502 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 503 #define CONFIG_BOOTFILE         "uImage"
 504 #define CONFIG_UBOOTPATH        "u-boot.bin"
 505
 506 #ifdef CONFIG_SDCARD
 507 #define CONFIG_DEF_HWCONFIG     "hwconfig=usb1:dr_mode=host,phy_type=ulpi\0"
 508 #else
 509 #define CONFIG_DEF_HWCONFIG     "hwconfig=sim;usb1:dr_mode=host,phy_type=ulpi\0"
 510 #endif
 511
 512 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 513         "netdev=eth0\0"                                         \
 514         "uboot=" CONFIG_UBOOTPATH "\0"                          \
 515         "loadaddr=1000000\0"                    \
 516         "bootfile=uImage\0"     \
 517         "consoledev=ttyS0\0"                            \
 518         "ramdiskaddr=2000000\0"                 \
 519         "ramdiskfile=rootfs.ext2.gz.uboot\0"            \
 520         "fdtaddr=1e00000\0"                             \
 521         "fdtfile=bsc9132qds.dtb\0"              \
 522         "bdev=sda1\0"   \
 523         CONFIG_DEF_HWCONFIG\
 524         "othbootargs=mem=880M ramdisk_size=600000 " \
 525                 "default_hugepagesz=256m hugepagesz=256m hugepages=1 " \
 526                 "isolcpus=0\0" \
 527         "usbext2boot=setenv bootargs root=/dev/ram rw " \
 528                 "console=$consoledev,$baudrate $othbootargs; "  \
 529                 "usb start;"                    \
 530                 "ext2load usb 0:4 $loadaddr $bootfile;"         \
 531                 "ext2load usb 0:4 $fdtaddr $fdtfile;"   \
 532                 "ext2load usb 0:4 $ramdiskaddr $ramdiskfile;"   \
 533                 "bootm $loadaddr $ramdiskaddr $fdtaddr\0"       \
 534         "debug_halt_off=mw ff7e0e30 0xf0000000;"
 535
 536 #define CONFIG_NFSBOOTCOMMAND   \
 537         "setenv bootargs root=/dev/nfs rw "     \
 538         "nfsroot=$serverip:$rootpath "  \
 539         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 540         "console=$consoledev,$baudrate $othbootargs;" \
 541         "tftp $loadaddr $bootfile;"     \
 542         "tftp $fdtaddr $fdtfile;"       \
 543         "bootm $loadaddr - $fdtaddr"
 544
 545 #define CONFIG_HDBOOT   \
 546         "setenv bootargs root=/dev/$bdev rw rootdelay=30 "      \
 547         "console=$consoledev,$baudrate $othbootargs;" \
 548         "usb start;"    \
 549         "ext2load usb 0:1 $loadaddr /boot/$bootfile;"   \
 550         "ext2load usb 0:1 $fdtaddr /boot/$fdtfile;"     \
 551         "bootm $loadaddr - $fdtaddr"
 552
 553 #define CONFIG_RAMBOOTCOMMAND           \
 554         "setenv bootargs root=/dev/ram rw "     \
 555         "console=$consoledev,$baudrate $othbootargs; "  \
 556         "tftp $ramdiskaddr $ramdiskfile;"       \
 557         "tftp $loadaddr $bootfile;"             \
 558         "tftp $fdtaddr $fdtfile;"               \
 559         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 560
 561 #define CONFIG_BOOTCOMMAND CONFIG_RAMBOOTCOMMAND
 562
 563 #include <asm/fsl_secure_boot.h>
 564
 565 #endif  /* __CONFIG_H */